Advanced materials and processing technologies : IFMPT 2014 : selected, peer reviewed papers from the 2014 International Forum on Materials and Processing Technology (IFMPT 2014), January 18-19, 2014, Guangzhou, China
著者
書誌事項
Advanced materials and processing technologies : IFMPT 2014 : selected, peer reviewed papers from the 2014 International Forum on Materials and Processing Technology (IFMPT 2014), January 18-19, 2014, Guangzhou, China
（Advanced materials research, v. 900）
Trans Tech Publications, c2014
- : pbk
大学図書館所蔵 件 / 全1件
-
該当する所蔵館はありません
- すべての絞り込み条件を解除する
注記
Includes bibliographical references and indexes
内容説明・目次
内容説明
Collection of selected, peer reviewed papers from the 2014 International Forum on Materials Processing Technology (IFMPT 2014), Februar 15-16, 2014, Guangzhou, China.
The 163 papers are grouped as follows:
Chapter 1: Polymers, Rubber and Elastomers,
Chapter 2: Metals and Alloys,
Chapter 3: Ceramics,
Chapter 4: Composites,
Chapter 5: Micro/Nano Materials,
Chapter 6: Optical/Electrical/Magnetic Materials,
Chapter 7: Energy Materials and Research,
Chapter 8: Biomaterials,
Chapter 9: Chemical Materials and Testing Technology,
Chapter 10: Films,
Chapter 11: Building and Road Materials, Construction Techniques,
Chapter 12: Surface Engineering/Coatings Technology,
Chapter 13: Materials Processing and Manufacturing Technology,
Chapter 14: Mining and Mineral Processing,
Chapter 15: Mechanical Behavior and Fracture,
Chapter 16: Friction, Wear and Lubrication,
Chapter 17: Heat Generation and Conduction
目次
Preface and Conference Organization
Chapter 1: Polymers, Rubber and Elastomers
Characterization of Thermal Reversible Cross-Linking Agents for Flexible Poly(vinyl chloride)
Compressive Behavior of a Polyurea Elastomer
Progress in Development of Catalyst Systems for Coordinated Polymerization of Olefins
Study of Molecular Structure of Water-Soluble Phenolic Resin with Different Molecular Weight by Infrared Spectrum
Synthesis of a Surfactant Hexadecyl Methyl Dihydroxyethyl Ammonium Bromide by a Non-Solvent Synthesis Method
Study on Solvent Resistance of Ternary Plastic Alloys of PEEK/PEI/PES
Chapter 2: Metals and Alloys
A Novel Iron Oxidation Process in Zinc Leaching Solution by Ozone
Corrosion Behaviors of Mg-7Gd-5Y-1Nd-0.5Zr Alloys in CO2 Atmosphere under Different Relative Humidity
Effect of Rotating Magnetic Field on Fluid Convection and Microstructure during Directional Solidification of Sn-Zn Alloy
Experiments on Effect of Red Mud-Based Slag on Distribution of Sulfur in Liquid Iron
Influence of Niobium or Molybdenum in Titanium Alloy for Permanent Implant Application
Inner Connection of Bainite and Pearlite Transformation in Steels
Research on Impact Fracture and Microstructure of 40Cr Steel under Different Tempering Conditions
Simulation and Optimization of Flow Field in the Mold of Slab Continuous Casting
Study on Fe-Mn-Si Shape Memory Alloy Anti-Loosening Bolt
Study on the Forming Accuracy of TRIP Steel Products in ISF
The High Temperature Oxidation Behavior of Hot-Dip Aluminized GH169
Effect of Different Tempering Temperatures on Microstructure and Impact Property of 20CrMnTi Steel
Relationship between Heat Treatments and Corrosion of Al-Si-Mg Casting Alloy
The Effect of Process Parameter on the Second Phase Particles in Al-Ti-B Master Alloys
The Modification Research of Al-Ti-B Master Alloy (Progress)
A Closed Form Solution for Wave Propagation in a Rectangular Waveguide Filled with Time-Varying Media
Chapter 3: Ceramics
Effect of Sintering Temperature on Microstructure and Electrical Properties of (1-x)BCZT-xBY Lead-Free Ceramics
Fused Silica Ceramics and Composites for Radome Applications
Research Progress of Al2O3 Based and Si3N4 Based Ceramic Tool Materials
The Influence of Sintering Atmosphere and Reoxidation Temperature on the Electrical Properties of the Chip-Type Ba1-xSmxTiO3 Based Ceramics
Chapter 4: Composites
Microstructure and Mechanical Properties of Mg-Based Composites Reinforced with TiB2 Particles
Preparation and Properties of Organosilicon-Modified Acrylate Resin
Preparation of Functional Particles Modified Epoxy Multilayer Composite and their Radiation Shielding Properties
The Influences of Holmium on Microstructure and Properties of In Situ Mg2Si/Al Composites
Fe3O4 and TiO2 Embedded Sodium Alginate Beads of Composite Adsorbent for Pb(II) Removal
Chapter 5: Micro/Nano Materials
Development of Nano Magnesium Phosphate Materials for Biomedical Application
Effect of Temperature on Fe3O4 Magnetic Nanoparticles Prepared by Coprecipitation Method
Synthesis and Characterization of Nanosized Inorganic-Organic Hybrid between Phosphotungstic Acid and Rhodamine 6G
Research on New Technology to Prepare Magnesium Hydroxide from Magnesium Sulphate
Investigation on the Structure and Luminescence Performance of Tb-Doped ZnO Nanocrystals Prepared by Direct Precipitation
Study on Nanocomposite Membranes with Enhanced Performance for Forward Osmosis
Chapter 6: Optical/Electrical/Magnetic Materials
Analysis on the Crystallographic Orientation of Micro-Area under High Magnetic Field
First Principles Studies on Structural, Electronic and Optical Properties of SnO2
Optimal Design and Preparation of Novel Radiation Shielding Materials Used for Low Energy /X-Ray
Simulation and Size Optimization of PbSe Quantum Dots Luminescent Solar Concentrator
Study on Electronic Structure of GaN under Pressure
Study the Coupled-Cavity Waveguides Photonic Crystal Power Splitter
Chapter 7: Energy Materials and Research
Effect on Coal Physicochemical Properties from Added Foreign Chemicals
Effects of Preparation Process Parameters on Performance of Microencapsulated Paraffin/Polyurea Phase Change Materials
Experimental Studies on Coal Permeability Characteristics under Different Pore Pressure
Hydrothermal Synthesis and Electrochemical Performance of LiFePO4/Graphene Composites for Lithium-Ion Batteries
Novel Honeycomb Glassfiber Mat as the Core of Vacuum Insulation Panel
Preparation and Characterization of LLM-105 Cocrystal Explosives
The Hawking Radiation of Massless Particles via Tunneling from EBI Black Hole
Bethe Approximation in the Theory of "Average Spin"
Chapter 8: Biomaterials
Antioxidant Activity of Sorbus sibirica Fruit Extracts
Hydrophilic Mechanism of Sunflower Leaves and Simulation Research
Influences of the Relative Dimension of Cell and Micropipette and Compressibility of Cells on the Determination of Elastic Properties of Chondrocytes during Micropipette Aspiration
Properties of OQPaP Bleached Pulp of Pinus kesiya and Dendrocalamus giganteus Munro Made by Low-Temperature Kraft Pulping
Research on Hydrophilicity and Microstructure of Several Plant Leaves
Study on the Optimal Hydrolysis Conditions of Ganoderma lucidum Spore Powder under Microwave Irradiation
Study on the Y3+-Trpptophan-Curcumin-SDBS System by Spectrophotometry and its Analytical Application
Synthesis and Properties of Esters of Amino Acids' Composite and Palmityl Alcohol
Preparation and Characterization of a Novel -PGA/ -Tricalcium Phosphate Composite for Tissue Engineering
Hydrolytic Activity of a Neodymium(III) Complex in DNA Cleavage
Double-Chain Tight-Binding Model to Calculate Conductance of DNA
Physical Properties and Antimicrobial Activity of a Poly(lactic acid)/poly( -caprolactone) Film Antimicrobial Coating with Chitosan
Chapter 9: Chemical Materials and Testing Technology
Density Functional Calculations on the Alkaline Hydrolysis of Phosphate Triesters
Growth of Near-Stoichiometric Lithium Tantalite Crystal and its Optical Characterization
Influence of Raw Material Concentration on Product Characterization of Magnesium Hydroxide Prepared via Ammonia Method
One-Bath One-Step Dyeing Process of Reactive Dyes to Cotton/Hemp Fabric
Preparation of the Lithographic Printing Ink Cleaning Solution in Plateaus
Research on Electrochemical Polymerization of Conductive Heteroaromatic Polymers
Rheological Property of Sodium Alginate-Agar-Montmorillonite Ternary Solution
Study on Synthesis of Ester of Citric Acid and Palmityl Alcohol
Synthesis and Application of Fluorosilicone Polymer
Synthesis and Evaluation Methacrylate-Based Monolithic Materials Mixed with Carbon Nanotubes
Electrochemical Oxidation of o-Amiophenol in the Presence of NaCI for Wastewater Treatment
Modified Unsplitted Perfectly Matched Layer Absorbing Boundary Conditions for Truncating Anisotropic Medium
Designing of In Situ FTIR Cell and its Application
Chapter 10: Films
Co-Electrodeposition and Characterization of Ag-Ag2S-PbS Thin Films on Indium-Tin-Oxide Coated Glass
Experimental and Simulation Study of Magnetron Sputtering MgO Film Thickness Distribution
Review of the Study on Load Capacity of Oil-Film Bearings
Study of Atmospheric Pressure Plasma Jet on Surface Modification of Polyimide Film
The Research of the Zn2TiO4 Films Grown by Magnetron Sputtering
Chapter 11: Building and Road Materials, Construction Techniques
A Three Dimensional Microstructure Sphere Model of Cement Hydration
Bond-Slip Constitutive Relationships of the CFRP/Concrete Interface
Design of an Innovative Large FRP Pultruded Structure
Effect of Dowel Looseness on Response of Jointed Concrete Pavements Using Three-Dimensional Finite Element Analysis
Experimental Study of Rockfill Particle Breakage
First Evaluations on Structural Response of FRP Pultruded Applications Subjected to Seismic Actions
Performance of Different Connections for a SFGP-RC Prototype Panel
Research Application of Colored Asphalt Mixture Pavement
Structural Behaviour and Comparison of CGF Panels
Structural Performance of a New Column's Prototype Made by FRP Pultruded Material and Light Concrete
Ultimate Bearing Capacity of Steel-Reactive Powder Concrete Composite Beams
Analysis of Bearing Capacity of Eccentrically Loaded GFRP Tube Columns Filled with Reinforced Concrete
Test Study on Mechanical Performance of the Flexible Connections of the Precast Concrete Wall Panel
Process Parameters of Rubber Powder Particles Modified Asphalt
Road Performance Study on Gap-Graded and Dense-Graded of Rubber Powder Particles Modified Asphalt Mixture
Technical Standards of Rubber Asphalt and Crumb Rubber Modified Asphalt
Analysis of Obstacle of Development and Application that Coal Gangue Used in China Road Engineering
Chapter 12: Surface Engineering/Coatings Technology
Cathodic Arc Evaporated CrAlSiN Coatings with Multi-Cycle Depositions
Corrosion Behavior of the Composite Coatings Prepared on Magnesium Alloy AZ91 in Na2SO4 Solution
Impedance Behavior of the Composite Coatings Prepared on Magnesium Alloy AZ91 in Simulated Seawater Solution
Jet Stabilities in the Electrospraying of Macro-Molecules Solutions for Controllable Micro-Printing
Thermal Behavior of AlTiN Free-Standing Coating by Cathodic Arc Deposition
Influence of the Polymer Modified Mortar Coating on Gas Permeability of Steel Fiber Concrete
A Study on Multi-Focus Images Fusion Technology Based on Fiber Natural Boundaries
Chapter 13: Materials Processing and Manufacturing Technology
Adhesion Model and Shedding Limit's Identification of the Oxide Film on the Surface of ELID Grinding Wheel
Application of Incremental Forming in Sheet Metal Bending Process
Characteristic of Hyperbaric GMAW Metal Transfer at 1-12 Bar Argon Environment
Development and Application of a Cutting - Abrasive Impregnated Diamond Bit
EWR Research on PZT Excited Discharge Channel Compression Micro-EDM
Experimental Study on the Grinding Concentration of Dahongshan Copper
Grinding Model of Processing Aspheric Parts by Bending Method
Hot Deformation Behavior and Constitutive Equation of Mg-4Al-3Ca -1.5Zn-1Nd-0.2Mn Magnesium Alloy As-Extruded
Lapping Parabolic Parts Using the Bending Lapping Tool
Orthogonal Experimental Study on Moulding Conditions of Amino Moulding Plastic
Research on the Precision Machining on SiC
Research on Wear Mechanism in High-Speed Milling GH4169 with Coated Carbide Tool
Simulation and Stress Analysis of U-Shaped Seam Welding Process Based on ABAQUS
Study on the Double Pulse Laser Dynamic Electronic Speckle Measurement Based on FPGA
Synchronous Optimization of Clamping Force and Cutting Parameters for Thin-Walled Parts
The Development of the Microwave Assisted Rock Breaking Device
The Effect of Electron Beam Energy Density on Temperature Field for Electron Beam Melting
The Effect of Welding Speed on Mg/Al Dissimilar Stirring Brazing
Etching of Magnetic Materials Using Ar-CO/NH3 in a Reactive Ion Etching System
FE Analysis of Hot Strips' Temperature Distribution in Laminar Cooling Process
Influence of Lithography Distortion due to Metal Fill on CA
Beneficiation of Collophanite from Ores by Reverse Flotation
Study on Lateral Pressure-Transfer Regularity of Tube SGMF under High Pressure
Chapter 14: Mining and Mineral Processing
Flotation Tests on Ultra-Fine Oolitic Cellophane
High Temperature Oxidation Behaviour of DSS 2205 in Humid Air
On the Feasibility of Applying Electric Field to Increase Oil Recovery in Old Oil Field
Study on the Concentration of a Carbon-Containing Oolitic Low-Grade Collophane
The Study of Optimization Experiment on Injection Timing and Injection Pattern of Binary Compound Flooding after Polymer Flooding of Heavy Oil in Offshore Field
Characteristics and Sequences of Fractures in the Tight Conglomerate Reservoirs of Jiulongshan Structure
Chapter 15: Mechanical Behavior and Fracture
Analysis on Waterfall Tube Corrosion and Strength Calculation for Boilers Exceeding Service Life
Intensity Variation of the Electromagnetic Emission (EME) of Rock Masses Failure under Dynamic Load
Least Squares - Boundary Element Method of Calculating Minimum Anisotropic Stress and Displacement
On the Bending of a Thin Plate at Nonlinear Creep
Reliability of Cu to Cu Joints Fabricated Using SnAg Capping Layer for 3D TSV Applications
Properties of Hand Woven Cotton for Thai Children Standard Sizes Models
High Strain Rate Superplasticity and Microstructure Evolution in a Coarse-Grained Mg-Gd-Y-Zr Rolled Sheet
Study on Sinter Microhardness of WISCO
Research of High Grade HIC-Resistant Pipeline Steel
Study on the Influence of Deformation of the Slipper of Axial Piston Pump under High Pressure on Oil Film Structure
Research on Dispersion Mechanism of Extinguishing Agent Scattered by Grenade Explosion
Simulation Analysis of Isolation about Spray Boom
Dynamic Response Analysis of Super-Long Hybrid Jib Structure under Impact Load
Dynamic Stability of an Axially Moving Yarn with Time-Dependent Tension
Gelled Crude Oil Particle Deformation under Hydraulic Suspension Transport Investigated by Numerical Simulation
Chapter 16: Friction, Wear and Lubrication
Analyzed on the Lubrication Characteristics Orthogonal Test of the Low Speed and Heavy Load Equipment
Effect of Cryogenic Treatment on Friction and Wear Property of DLC Film/304 Stainless Steel
Gas Turbine Engines Lubrication System Design
System Modeling and Characteristic Analysis for a Permanent Magnet Orbital Friction Vibration Actuator Used in Orbital Friction Welding
The Optimization Design and Research of CX20 Clutch Friction Plate
Theoretical Simulation of the Temperature Increasing Induced by the Friction between Cotton Packages and Iron Floor during the Transportation by Train
Study on Friction and Wear Behaviors of Aluminium Matrix Composites Reinforced with In Situ Formed TiB2 Particles
Study of Analysis Method for Hertz Contact Problem in Friction Drive
Chapter 17: Heat Generation and Conduction
Analysis on the Waste Heat Utilization of Lower Temperature of Steelworks Based on the Theory of Total Energy System
Numerical Study on Heat-Flow Density of Aerospace Plane
Numerical Study on Structure Thermal Protection of Aerospace Plane
Thermal Analysis of Blood Pump Rotor System
Transient Thermal Analysis of Wheel-Mounted Brake Disc of Gray Cast Iron
Simulation on Temperature Characteristics of Solar Cell
「Nielsen BookData」 より