Materials science, environment protection and applied research : selected, peer reviewed papers from the 2014 2nd International Conference on Environmental Science and Material Application (ESME 2014), March 22-23, 2014, Wuhan, China
Author(s)
Bibliographic Information
Materials science, environment protection and applied research : selected, peer reviewed papers from the 2014 2nd International Conference on Environmental Science and Material Application (ESME 2014), March 22-23, 2014, Wuhan, China
（Advanced materials research, v. 908）
Trans Tech Publications, c2014
- : pbk
Available at 1 libraries
Note
Includes bibliographical references and indexes
Description and Table of Contents
Description
Volume is indexed by Thomson Reuters CPCI-S (WoS).
Collection of selected, peer reviewed papers from the 2014 2nd International Conference on Environmental Science and Material Application (ESME 2014), March 22-23 2014, Wuhan, China.
The 127 papers are grouped as follows:
Chapter 1: Materials Science and Processing,
Chapter 2: Chemical Materials and Technologies,
Chapter 3: Mechanical Engineering and Applied Mechanics,
Chapter 4: Environment, Environment Protection and Energy Engineering,
Chapter 5: Information and Applied Technology
Table of Contents
Preface, Committee and Sponsor
Chapter 1: Materials Science and Processing
Experimental Study on Connections of Superimposed Slabs
Calculation and Analysis of the Thermal Performance of a New Type of Rock Wool Color Steel Sandwich Board
Source Apportionment of Heavy Metals (Pb, Cd, As, Hg) in PM2.5 and PM10 in a City in China
Effects of Copper Extraction-Stripping Loops on Entrainment in Aqueous Raffinate
Improvement of Operational Reliability with Material Properties for Aircraft Equipment
Application Research of Environmental Friendly Material for Architecture
Test and Application of High Performance Concrete
Study on the Brush Plating Technology of High-Temperature Alloy
The Influences of Process Parameters on Properties of CrNx Coatings Deposited by Closed Field Unbalanced Magnetron Sputtering
Synthesis and Characterization of a New Type of Highnuclear Lanthanide - Cobalt Carboxylate Cluster Complex
Improvement Research of Organic Phenolic Gel being Used to be an Organic Deep Profile Control Agent
Application of Titanium Metal Materials and Bone Tissue Engineering in Exercise-Induced Bone Injury Repair
A Conductivity Model for Inequigranular Sandstones Based on Material Properties with Pore Geometric Conduction Theory and Effective Medium Conduction Theory
Feasibility Study on Sprayed FRP Used in the Seismic Strengthening of Concrete Frame Joints
Preparation and Dielectric Property of Al2O3 Surface Coating Modified BaTiO3/Polyimide Composite Film
Corrosion of an Austenitic Heat-Resistant Steel HR3C in High-Temperature Steam and Supercritical Water
Analysis on the Structure and Mechanism of Cracking and Spalling for Super304H Steel Oxide Films in High-Temperature Steam
Research on a Surface Shot Peeling Process for Increasing the Anti-Oxidation Property of Super304H Steel in High-Temperature Steam
Numerical Analysis on Heat Transfer and Oxidation Characteristics of High-Temperature Steam Pipes in Supercritical Units
Study on Rock Conductive Law of Sandy Conglomerate Reservoir Based on Properties of Construction Materials
Study on Calculation Formula of Seismic Shear Capacity of the Core of Concrete Frame Joint Strengthened by Sprayed FRP
Study on the Corrosion Behaviour of Nickel-Base Alloy 625 in Landfill Leachate Treated by Supercritical Water Oxidation
A Nonlinear Catastrophic Model of Isolated Rock Pillar Instability and its Chaotic Behaviour Based on Material Properties
A Constitutive Model of Rocks under Uniaxial Tension
Research on Package Materials with Properties of Packaging Materials for the Tianjin Port Throughput Prediction and Analysis
Effect of Temperature on CO2/H2S Corrosion of Oil Tube Steels
Study on Mechanical Properties of Rebar HRB400 after Corrosion
Effect of Compression Storage on Adsorption Property of Silicone Rubber in Silicone Interfacial Systems
Study on Structural Properties of Gallium and Titanium Doped Zinc Oxide Films Deposited by Magnetron Sputtering
Research on the Construction Materials with the Construction Planning of Modern Industry Region in the Historic Cities: Taking the Luoyang in Henan Province as Example
Study on Biological Materials with Flavonoid Active Compounds of Apocynum venetum L.
Influences of Molding Pressure on Products Morphology and Carbonated Efficiency of Calcium Hydroxide
Mechanics Performance of Cement Mortar Modified by Carboxylic Styrene Butadiene Latex
Experimental Study on the Solubility of O2 and N2 in the Liquid Oil at Low Pressure
Chapter 2: Chemical Materials and Technologies
Effect of Na2WO4 Content on the Crystallization Temperature of NaCl-KCl-Na2WO4 Molten Salt System
Effect of Na3WO3F3 Content on the Liquidus Temperature of NaCl-KCl-Na3WO3F3 Molten Salt System
Study on the Conditions of Oxidation of Nitrogen Dioxide and Nitrite by Manganese Dioxide
Study of Solubility of WO3 in the NaCl-KCl-NaF-WO3 Molten Salt
Effect of Temperature on Solubility of WO3 in the NaCl-KCl-NaF-WO3 Molten Salt
Nitrogen Removal with Nitrification and Denitrification via Nitrite
Study on Sulfur Retention Characteristics for Bio-Briquette
Performance of Sodium Chlorite/Urea on Simultaneous Desulfurization and Denitrification in a Rotating Packed Bed
Simultaneous Absorption of SO2 and NO Using Sodium Chlorate/Urea Absorbent in a Rotating Packed Bed
The Conjecture of Obtain C4H6O+ Fragments by Cyclicketone Ion Excited State
Comparative Study on the Effect of Preparation of TiO2 and the Photocatalytic Degradation of Phenol Based on the Biological Template
Synthesis of Inosine Polyphosphates from Inosine 5'-Phosphate
A Novel Synthesis of Acyclovir Polyphosphates via Acyclovir Phosphoropiperidate Intermediate
Practical Synthesis of , -Bridging Oxygen-Modified Stavudine 5'-Triphosphates
Efficient Synthesis of d4T Diphosphate and d4T Triphosphate
Solid-Phase Synthesis of Pyrrole-Imidazole Polyamides by Resin
Research on Biological Materials with Oxazinone Derivatives Induce Apoptosis in HT-29 Cells
Aggregation-Induced Emission of New Tetraphenylethene-Thiophene Hybrid and Application as Sensitive Chemosensor
The Analysis for Fluroxypyr Ester by Liquid Chromatography
Contribution of H2 during the Two-Phase Anaerobic Digestion
Review of Supercritical Water Oxidation in Hydrothermal Flames
Chapter 3: Mechanical Engineering and Applied Mechanics
Study on the Vortex Ring State of Helicopter and Flight Training Operation
Comparison of Hydrodynamic Performance of Ducted Propeller and Ordinary Propeller on Trawler
Research on Mechanical Dynamics in DC Servo Motor Adjustment System Based on Applied Technology
Research on Mechanical Mechanics with Optimization and Upgrading of Public Bicycle System Based on "Wuhan" Mode
Numerical Simulation of Unsteady Aerodynamic Loads over an Aircraft
Testing Study and Mechanics Analysis on Fatigue Life of MSD Structure
The Analysis and Research of Robust Performance Based on the Permanent Magnet Synchronous Linear Motor
Influence of Gas-Liquid Distribution Inducer on Mass Transfer Coefficient in Rotating Packed Bed
Finite Element Analysis of Drilling Frame on Down-the-Hole Drill Based on Mechanical Mechanics and Mechanical Properties
Experimental Study on Critical Load of Compression Column with a Rectangular Cross-Section Based on Material Mechanics
Down-the-Hole Drill Position Based on Mechanical Mechanics and Binocular Stereo Vision
Mechanism Study on the Impact of Low Pressure Accumulator with Mechanical Mechanics to Hydraulic Impactor
Experimental Study on the Influence of Injection Timing on Combustion and Emission of Biodiesel Engine Based on Mechanical Mechanics
Stress Research and Finite Element Analysis of Pile Clamping Mechanism of Hydraulic Static Pile Driver
Dynamic Analysis and Applied Technology in New Anti-Jamming Hydraulic System with Fast Response
Study of Control Method Based on Hydromechanics for Hydraulic Impact of Open Hydraulic System in Concrete Pump
Mechanical Mechanics and Calculation Method Research for Main Steam Flow of Turbine
Mechanical Mechanics and Application of High Speed On/Off Valve to Feeding System of Hydraulic Drilling Rig
Dynamic Analysis of Hammer Buffer System Using Pseudo-Bond Graph Simulation Method
On the Strengthening Methods of Steel Grid Structures Lifting
Studies on the Effect of Altitude on the Flammable Liquids' Flash Point
Simulation of Two-Stage Fuel Reactor Chemical Looping Hydrogen Process Using Solid Fuel
Chapter 4: Environment, Environment Protection and Energy Engineering
Analysis and Design of Environmental Protection and Energy Saving in Modern Society Building
Tourism-Related Pay for Environmental Services: An Important Tool for Environmental Management
Study on the Optimal Use of Land from the Perspective of Soil Ecological Value
Exploration of the Influence of the Environmental Temperature and Thickness of Fat on Heat Release
Research of City Environmental Pollution and City Planning for the Future
The Development Mode of the Livable Environment Construction of Shenyang Tiexi Old Industrial Relocation Zone
Effect of EPS on Membrane Pollution in IMBR
A New Prediction Method of Soil Pollution
Study of Ecological Environment on Assessment Model of Ecosystem Damage Caused by Oil Spill in Ocean
Research on Modern Urban Environmental Construction from Inspiration of the Chinese Ancient Ecological
Research on Evaluation System and Environmental Construction for Energy-Efficiency about the Residential Buildings
Analysis of the Atmospheric Visibility in Nanchang City and the Main Effect Factors
Application of Video Capture Theory in Municipal Solid Waste Classification
Technology Application and Stress Analysis in Quayside Container Crane's Design of New Energy-Efficient Power Generation System
Comparative Environmental Analysis of the Effects of Different Salinity Levels on Growth and Physiological Status of Nipponbare Rice
Research on Environmental Protection and Environmental Analysis of Travel Mode Choice under the Guidance of Environmental Protection Ideas
Numerical Study of Water Exchange in Environment Engineering in Pulandian Bay
Study on Environment Protection and Pedestrian Evacuation Characteristic in Subway Fire
Natural Gas Load Forecasting with Analysis of Environmental Resources Based on Gray Model
Study on High-Temperature Working Environment with the Excretion and the Levels In Vivo of Vitamin C among Heat-Exposed Workers
Characteristics of Particle Matter Pollution and its Control in Beijing
Study on Building Energy Saving Techniques and Ways in China
Research on Views of Energy and Design Technology for Green Building
Study on Environment Protection and Construction of Corporate Social Responsibility Index System
Hydrothermal Treatment Technology of Municipal Sewage Sludge
Research on Energy and Environment Engineering with Heat Transfer in the Geothermal Heating System with Horizontal Wells
Design and Study on Ocean Energy with the Horizontal Axis Tidal Current Turbine's Blade Especially for China's Low Tidal Current Velocity
Environment Research with Development and Application of a Low Cost and Long Life Ice Buoy for Arctic Environment Monitoring
Research on Pollutant Emission CEMS Remote Monitoring System Based on WEB and CAN Bus
A SoC Controller for Energy Saving and Environmental Protection
Research on Decontamination of Chemical Accident Disposal to Reduce the Harm to the Environment
Research on Groundwater Pollution with Contour Line Realization Methods Based on Monitoring Data by COMGIS
The Method to Display the Distribution of Groundwater Pollution Dynamically with COMGIS Based on Visual Developing Platform
A Survey of Coagulating-Based Treatment of Printing and Dyeing Wastewater
Contaminant Trasportation of Cd2+ in the Cushion System of the Municipal Waste Landfill
Influence of Compact Clay Layer on the Seepage Performance of the Municipal Solid Waste Landfills
Chapter 5: Information and Applied Technology
Applied-Information Technology in Research of Security Processing Based on IOT Data
Research on Applied Technology in Experiments with Three Boosting Algorithms
Applied Information Technology and Electronic Materials in Interpretation
Applied Mechanics and Applied Technology in Gully Erosion Measurement Based on Computer Vision with a Reference
Applied-Information Technology and Electronic Material in Construction and Research on the Web Citations Accessibility
Research on Applied Technology with Bluetooth Technology in Design of Multifunctional Teaching System
Applied-Information Technology in Supply Chain Knowledge Collaborative Model Based on Semantic Web Service
Applied-Information Technology and Parallel Learning Rules in Intelligent Control System
Applied Information Technology in Graphics Algorithm Implementation Based on the Web Canvas
Optimization Technology of PID Parameter in Control System Based on Improved Particle Swarm Optimization Algorithms
Symmetrical Effective Medium Resistivity Model with Sorting for Sandy Conglomerate
Image Processing Technology Research of On-Line Thread Processing
Research on Electronic Technology in Risk Analysis of Power System Based on Electronic Materials and Geomagnetic Storm Scene Model
Research on Applied Technology with Development of Modern Computer Simulation Technology
by "Nielsen BookData"