Advanced engineering research : selected, peer reviewed papers from the 2014 2nd International Forum on Mechanical and Material Engineering (IFMME 2014), March 8-9, 2014, Zhuhai, China
著者
書誌事項
Advanced engineering research : selected, peer reviewed papers from the 2014 2nd International Forum on Mechanical and Material Engineering (IFMME 2014), March 8-9, 2014, Zhuhai, China
（Advanced materials research, v. 915-916）
Trans Tech Publications, c2014
- : [set]
- Part 1
- Part 2
大学図書館所蔵 件 / 全1件
-
該当する所蔵館はありません
- すべての絞り込み条件を解除する
注記
Includes bibliographical references and indexes
内容説明・目次
内容説明
Collection of selected, peer reviewed papers from the 2014 2nd International Forum on Mechanical and Material Engineering, (IFMME 2014), March 8-9, 2014, Zhuhai, China.
The 301 papers are grouped as follows:
Chapter 1: Mechanical Dynamics and Vibration,
Chapter 2: Mechanical Strength,
Chapter 3: Mechanical Friction, Wear and Lubrication,
Chapter 4: Mechanical and Construction Design and Engineering,
Chapter 5: Vehicle Engineering,
Chapter 6: Robot Technology and Applications,
Chapter 7: Advanced Materials,
Chapter 8: Metal and Alloys,
Chapter 9: Composite Materials,
Chapter 10: Thin-Film Materials and Coatings,
Chapter 11: Bioresearch and Environmental Materials,
Chapter 12: Processing Technologies,
Chapter 13: Mineral Mining and Processing,
Chapter 14: Electronics Systems and Technologies,
Chapter 15: Signal and Data Processing Technology,
Chapter 16: Algorithms and Analysis,
Chapter 17: Information and Computation Technologies and Applications,
Chapter 18: Industrial Engineering and Engineering Management
目次
Preface and Conference Organization
Chapter 1: Mechanical Dynamics and Vibration
Analysis and Experiment Study of Continuous Beam Arch Composite Bridge
Analysis and Simulation of UAV Aircraft Flight Dynamics
Analysis of the Influences of Drilling Fluid Flow Velocity inside and outside the Drilling String on Drilling String Lateral Vibration Frequency
Analysis on the Bias of Seismic Ground Motion Prediction in a Shallow Stiff-Soil Site by LSSRL-1 Program
Analysis on Torsional Vibration Characteristics of Turbo-Generator Units Based on Finite Element Method
Based on Dynamic Simulation Optimization of CNC Cutting Parameter Database System is the Key Technology Research
Dynamic Analysis and Experimental Research of Laser Cutting Machines
Dynamic Research of a Kind of Morse CVT Input Mechanism and Parameters Optimization
Dynamics Analysis of Vertical Transferring Frame of Garbage Container
Edge Resonances of Circular Cylinders
Experimental Analysis of Dynamic Characteristic for Automatic Tensioner
Impact of the Wenchuan Earthquake on Construction Index Using an EMD-Based Event Analysis Method
Modal Analysis of Crankshaft under Multi-Speed
Numerical Analysis of the Deformation Law of Deep Foundation Pit of Subway Station by FLAC3D
On the Possibility of Neglecting the Coupled-Mode Oscillations of a Single-Mass Dynamic System under Non-Steady Kinematic Excitations
Preliminary Exploration of 2-Dimensional Seismic Response Analysis for Elastic Layered Model by ABAQUS
Research on Automobile Coupled Vibration between Transmission Shaft and Drive Axle Gears
Study on Combination Method of Stochastic Load Processes
The Engineering Application of New Method for Calculating Seismic Active Earth Pressure of Soil-Nailing Retaining Structures
Transfer Function Development of Uniaxial Horizontal Centrifugal Shaking Table
Two Methods for Edge Reflection Problems in Circular Cylinders
Vibration and Noise Analysis for a Motor of Pure Electric Vehicle
Verification of the Applicability of Seismic Safety Evaluation Program LSSRLI-1 in Medium Soft Soil Using Exact Solution
The Influence of Underpass on Surface Subsidence Caused by Double-Tube Shield Tunneling
Dynamic Response Analysis of Composite Soil Nailed Wall under Earthquake
Study on the Ground Response Analysis for Stiff Soil
CFD Simulation Study of Gas-Liquid Flow Regimes in Inclined Wellbore
Chapter 2: Mechanical Strength
Construction of Fo Zhao Gui Dan Intercity Bridge Project in Guang Zhou
Crack Analysis of Bridge Piers of a Rail Transit Line in Guangzhou City
Finite Element Analysis and Research of Engine Connecting Rod
Finite Element Simulation Analysis on Space KX-Joint
Initial Buckling of Compressed Rectangular Panels with Variable Stiffener Sizes
Study on the Relationship between the Diameter and the Stress Concentration
Chapter 3: Mechanical Friction, Wear and Lubrication
Numerical Research on Internal Flow Induced Noise of Rotor Oil Pump
Research on Micro-Pool Drill and its Drag Reduction Effect
Study of Friction Lubrication Characteristics Research for CVT Fluids in Field Test
Study on the Effect upon Wear of Steel Ball from Injection Pressure in Reinforced Grinding Processing
The Analysis on the Tribological Properties of TPU/PVC Blends with Chrome-Plated Steel under Dry Sliding
The Fault Analysis and Research of Turbine Generator Sliding Bearing Oil Film Instability
Chapter 4: Mechanical and Construction Design and Engineering
A New Method to Quickly Optimize the Thickness of Multi-Holes Plate
A Study about Wind Stresses of 4-Dish Parabolic Solar Collector System by Using FEM and Response Surface Method
An Assembly Prediction Model Based on GA-BP Neural Network
Design and Optimization of the Flywheel Compressor Based on SolidWorks and Fluent
Design of Electrically Controlled Movable Vane Regulation System of Axial Flow Fan
Development of a 90 Degrees/180 Degrees Upender for Large and Heavy Workpiece by Using Airbags-Drived Flipping Worktable
Hypoid Gear Three-Dimensional Modeling with Pro/E
Layout Topology Optimization for Inner Stiffeners of Excavator's Boom
Optimal Design of Conductor Clamps Based on Abaqus
Research on the Arc-Teeth Synchronous Belt's Tooth Load Distribution Caused by the Machining Error
Study of the Flexible Clamping Technology on the Detection Platform of Automobile Electric Glass Regulator
The Design and Kinematics Analysis of an Underactuated Cable-Truss Mechanism
The Design Method of Major Parameters for Built-Up Columns
The HST Load Feedback Automatic Speed Regulating Device Design for Combine Harvester
The Study of Arc Teethed Automotive Synchronous Belt's Transmission Stability
Truss Optimization Based on the Evolutionary Structural Optimization
Wind Turbine Tower Climbing System Design
Flexible Manufacturing System CNC and the Integration of SmarTeam
Research on CISSCAx System of Suitable for Flexible Manufacturing Mechanical Products
The Performance Calculation Method of Fouled Axial Flow Compressor Based on the Stage Stacking Method
Finite Element Analysis of the Chassis for Sugarcane Leaf Cutting Off Returning to Field Machinery
A Pulsed Diaphragm Piezoelectric Pump Using Centrifugal Force
Error Modeling Analysis of Face-Gear NC Grinding Machine
Estimation of Failure Probability for Bearing and its Applications in the Case of Zero-Failure Data
Process Study for Forming a Precise Spline
Development of NdFeB Permanent Magnet Generator
Research Status of High-Intensity Pulsed Electric Field (PEF) Equipment and its Application on Food Processing
The Design of Vertical Seat Frame
Calculation Reactivity Degree for Axial Low-Account Turbines with Small Emergence Angles of Nozzle Devices
Experimental Research of the Nozzles
The Structure Design of Product Equipment for the Rigid PVC Crusting-Foam Plate
Numerical Simulation and Experimental Study on Water Mist Fire Suppression for Cooking Fog Discharge Pipe
Line Beam Shaper for Intra-Oral Scanning Device
Experimental Studies on Triple-Chamber Piezoelectric Pump with Triple Vibrators under Different Working Modes
Experimental Study on a Piezoelectric Energy Generator with Support Device Excited by Rotating Magnets
Two Load Distribution Measurement Methods of Single-Lap Composite Joints
A Wave Power Device Based on the Principle of the Connecting Rod's Transmission
Beam Shaping Technology for High Power Diode Laser Source
Feature Analysis for Driller Trip Operation Using AC Variable Frequency Motor
Functional Availability Modelling of CNC Machine Tools
Mechanism and Suspension Control Study for Spherical Reluctance Motor with Magnetic Levitation
Modeling and Simulation of Convenience Food Sorting System
Neural Networks Attitude Decoupling Controller Design of Dual-Ducted SUAV Based on ADRC System
Position Sensorless Control of Brushless DC Motor
Strategy Analysis of Override-Control for Drum Height of Shearers
The Research of ASR Strategy for the Spindle Inverter Control in CNC Machine Tool
F-RBFNN Used for Tuning Parameters of Adaptive PID Control for the Drive Motor of Car Dumper
Chapter 5: Vehicle Engineering
ABS Sliding Mode Variable Structure Control Based on Index Reaching Law
Analyze for Vertical Vibration of the In-Wheel Motor Electric Vehicle Based on Power Flow Method
Impact on Automotive Body Styling Dust Pollution
Multiple Targets Detection and Acceleration Estimation for Intelligent Transport System
Research and Improvement of the Keep-Right-Except-to-Pass Rule
Research on the Vehicles Queuing Based on Traffic Accidents
Chapter 6: Robot Technology and Applications
Jumping Locomotion and it's Application in Robots - A Review
Kinematics Analysis of Palletizing Robot
Platform of Industrial Robot Task Simulation Used in Welding Automation
Research on Design of Industrial Robot
Chapter 7: Advanced Materials
Broadband Microwave Transmission Achieved by Using Engineered Sandwich Materials
Cyclic Pulse and Chaos in an Erbium Doped Fiber Laser
Determination of the Crystallographic and Electronic Structure of Cesium Holmium Polyphosphate CsHo(PO3)4 with One-Dimensional Tunnel
Influence of Superficial Modification of Steels by Materials with Effect of Memory of the Form on Wear-Fatigue Characteristics at Frictional-Cyclic Loading
Study of Chemical Control Synthesis on Aluminum Salt Flame Retardants Powders
The Application of CFZ-Si Monocrystal Material in Photovoltaic Field
Generation Review on the Production Line Development of Foam Glass at Home and Abroad
Effect of Packaging Materials on the Reliability of LED Modules under High Temperature Aging Test
New Material Research of 200 DegreesC Ultra-High Temperature Fluid in Hydraulic Fracturing Industry Design Technology
Controllable Synthesis of ZnO Nanostructures via Template-Free Electrochemical Deposition at Low Temperature and their Optical Properties
External Potential Dynamics Simulation of Morphological Transitions in Diblock Copolymer Melt under an Electric Field
Fiber Materials AC Impedance Spectroscopy and its Application
Chapter 8: Metal and Alloys
A Method for the Prediction of Fatigue Life of Notched Metallic Material
Effect of Hf Content on Oxidation Resistance of Single Crystal Superalloy at 1000 DegreesC
Effect of High Strain Rate on Adiabatic Shear Sensitivity and Microstructures in Pure Titanium
Effect of Notch Radius on the Thermal Fatigue Property of a New Guide Vane Materials
Effect of Solution Temperature on the Microstructure and Mechanical Properties of Wrought 316LN Stainless Steel
Effects of Casting Temperature on as Cast Microstructure and Tensile Properties of AS31-Sr Alloy
Flow Behavior and Processing Map of Mg-4Al-3Ca-1.5Zn-1Nd-0.2Mn Magnesium Alloy
Formation Pathway of CuInSe2 through Solvothermal Route
Impact Performance of ZnAl27Cu2.5MgMn Alloy from Room Temperature to 250 DegreesC
Making Non-Dendritic Structure via Modified Cooling Slope Technique
Metallic Coatings: Al-Zn Alloys
Relationship between Creep Crack Propagation Rates of P92 Steel and Welding HAZ and High Temperature Creep Fracture Parameter C* Based on Reference Stress Method
Research of Martensite Bands in the Core of 82B Wires
Research of the Factors which Influence the Corrosion of Defective Stainless Steel Funnel
Research on Microstructure and Properties of Pure Copper Tube during Rolling Process
Shear Localization and Microstructure Evolution in AlMgMnEr Alloy during Dynamic Deformation
Study of Identifying the Banded Structure of 8620 Steel Bars
Study on Microstructure and Property of Al-Si-Cu-Mg Casting Alloy during Solution and Aging Treatment
The Characteristic of Microstructures and Mechanical Properties of a Cu-Ag In Situ Composite Material
The Control of Carbon Content in Sintering Process of Tungsten Steel
Perforation of Aluminum Plates with Ogive-Nose Projectiles Using Axisymmetric Smoothed Particle Hydrodynamics
Numerical and Experimental Investigations on SGMF of GH3044 Superalloy Tube
Chapter 9: Composite Materials
Assessment of PBE0 Calculation of C-NO2 Bond Dissociation Energies for Nitroaromatic System
Characterization of Radome Materials Comprising LTCC-Derived FSS on a Quartz Glass Plate
Experimental Study on the Mechanical Properties of Rubber Concrete
Influence of Lamellar Graphite Additions on the Electro-Magnetic Properties of Carbonyl Iron
Investigation on Microwave Property of Fe/Co Mixed Powders
Optimizations of Flame Spraying Aluminum Thickness and Laminate Plies for Composite Lightning Protection
Performance of Emulsified Asphalt Full Thickness Cold Recycling Subgrade Materials
Preparation of Nano-SiO2 Particles Modified by Fluorine Silane Coupling Agent
Ring-Opening Polymerization of Lactide Using Aluminum Salen-Type Initiators
Static Analysis of Composite Laminate Wind Turbine with Different Lamination Methods
Structure Design and Manufacturing of the Composite Blade for the Icing Wind Tunnel
Study on Fiber Reinforced Composite Materials with Wushu Cultural Heritage
Synthesis and Characterization of Amphiphilic Multiwalled Carbon Nanotubes Based on Linear Triblock Copolymer
Synthesis of Silica-Core/Polymer-Shell Microcapsule via Double In Situ Miniemulsion Polymerization
Synthesis of Spinous Spheres of Mn3O4 Nanoparticles and its Adsorption Behavior for 1-Naphthyl Ethylene Diamine-4-Azobenzene-4'-Sulfonic Acid
The Mechanical Properties and Thermodynamic Study on Polypropylene/Talc Composites
The Reinforcing Mechanism of Recycled Glass Fibers and Milled Glass Fibers in Polypropylene Composites
Theory Analysis on Chloride Permeation of Unsaturated Concrete in Subsea Tunnel
Application of Reactive Compatibilizer in High Performance Polymer Alloy
Effect of Carbon Nanotubes on Mechanical Properties of Cement Composites
Chapter 9: Composite Materials
Effect of Fe on the Microstructure and the Thermal Storage Performances of High-Silicon Aluminum Alloy
Preparation and Thermal Stability of Pyrrole and m-Toluidine Copolymer/Montmorillonite Composites
Experiment Investigation on Mechanical Property of Glass Fiber Reinforced Concrete
Fabrication of Al2O3 Particle Reinforced Aluminum Matrix Composite by In Situ Chemical Reaction
Inhomogeneous Chemical Composition of Semi-Continuously Casted ZK60A Billet
Chapter 10: Thin-Film Materials and Coatings
Fabrication of Copper-Based Superhydrophobic Surface through Template Deposition
Improved Optical Model for SiO2/Si Ultra-Thin Film Thickness Determination by Spectroscopic Ellipsometry
Microstructure and Mechanical Properties of (CrTiNb)N Films
Microstructure and Mechanical Properties of (TiAlNb)N Films
Preparation and Performance Test of Solvent-Free Heavy-Duty Polyurethane Coating
Preparation of Freestanding TiO2 Nanotube Arrays via Controlling the Anodizing Voltage
Preparation, Optical and Magnetic Properties of Ni-Doped CuAlO2 Nanocrystalline Films
Uncertainty Evaluation in Measurement of Thickness of SiO2/Si Using X-Ray Photoelectron Spectroscopy
Fabrication of Cu2ZnSnS4 Thin Films through Sulfurization of Co-Electrodeposited Cu-Zn-Sn Metallic Precursor
Influence of AlInGaN Blocking Layer on the Violet InGaN Laser Diodes
Investigation of Metal Peeling Failure of Ti/Ni/Ag Metal Thin Films on Silicon Wafers
Chapter 11: Bioresearch and Environmental Materials
A Parametric Investigation on the Neo-Hookean Material Constant
A Review on Synthetic Skin: Materials Investigation, Experimentation and Simulation
A Study on Steamed Stuffed Bun Preservation with Multiple Gas Media Package at Room Temperature
Alkali Pre-Treatment Dyeing Technology for Hemp/Cotton/Polyester Knitted Fabric
Antheraea pernyi Silk Fibroin Microspheres Carried Lysozyme
Effect of Dipping in Sodium Bisulfite Solution and Packaging under Nitrogen on Fresh Sweet Corn during High Temperature Sterilization and Shelf-Life
Finite Element Analysis of Distinguish between Two Bone Materials in Femoral Fixation System
Optimization of Proliferation Conditions of Recombinant Escherichia coli BL21(DE3)/pET-28b(+)-aroGM150
Preparation and Characterization of Poly- -Glutamic Acid-Based Nanoparticles Biomacromolecules
Preparation of PAA-Ch/Hydrogel, it Containing Bone Cell, PRP Nanocomposites and the Animal Trials
Research on the Whole-Progress Management of Medical Waste with Life Cycle Assessment
Research on Wettability and Microstructure for the Petals of Nasturtium, Canna and Rose
Selection of a Mutant Strain Streptococcus equi SH-109 and Optimization of Culture Conditions for the Production of High Molecular Weight Hyaluronic Acid
Simulation Analysis on Wastewater Anaerobic Tank Stench in Collecting Hood with Properties of Environmental Materials
Specifically Deoxyribozyme of the Protein Kinase C- Expression Treated in Human Hepatocellular Carcinoma HepG2 Cells
Study on Processing Technology of Oil-Tea-Cake on Acid Dye Neutral Red Wastewater
Synthesis and Properties of Novel Cashew-Based Sulfonate Gemini Surfactant
Synthesis of Fe2O3/CNTs for the Fast Removal of Tetracycline from Aqueous Solutions
Construction and Functional Analysis of Luciferase Reporter Plasmid Containing NF-H Gene Promoter
Research on Antimicrobial Activity and Packaging Performance of Degradable Protein Films
Schisandrae chinensis Extract Repaired Microwave Induced Hepatic Injury
TEOS Hydrolysis Method Synthesize Nano Silica and Biocompatibility Research
Compared Study of Vascular Cell Response to Mg-Zn-Y-Nd and WE43 as Biodegradable Stents
Comparison on Separation of Low-Content Nickel and Cobalt in Bioleaching Solution in Different Extraction System
Analyses of Flow Field and Heat Exchange about Limestone Grain in the Preheater
Influence of Sieve Structural Parameters on Sieving of Shelled Buckwheat
Chapter 12: Processing Technologies
A BP-ANN Based Surrogate Modeling for Predicting Engineering Analysis of Forging Press
Analysis on the Reasons of 500kV High-Voltage Disconnectors Hoop Fracture
Effects of Feed Angle on Mannesmann Piercing in Drill Steel Production
Effects of the Processing Parameters on Porosity of Selective Laser Sintered Aliphatic Polycarbonate
Five-Axis Machining Method of Complicated Curved Surface
Fracture of the Leads of Integrated Circuits with TO Package
High-Speed Cutting Machining Simulation of Aero Engine Casing Hole
Impact of Laser Parameters on the Contrasts of Laser Direct Marked Data Matrix Symbols on Titanium Alloy Substrates
Interface Diffusion of Composite Rolling AZ31 Magnesium Alloy Sheet Clad by Al Foil during Annealing
OFAT Experimental Study of Laser Direct-Part Marking of Data Matrix Symbols on Titanium Alloys
Optimization Time for Bending Extruded Aluminum Profile
Phase-Field Simulation Studies of Multiple Grains Coupled with Force Flow Field
Prediction and Prevention of Distortion for the Thin-Walled Aluminum Investment Casting
Solving Measures and Application of Super-Long Structure under Temperature Problem
Study on Thermal Decomposition Characteristics of Magnesium Salt Flame Retardants
The Characteristics of Trivariate Vector-Valued Super-Wave Wraps and Applications in Materials Engineering
The Effect of Inlet Conditions on Particle Deposition in Axial Flow Compressor
The Reductive Method of Copper and the Optimization of Oxygen Dosing in the Reduction Tube of Vario EL III Elemental Analyzer
Thermal Stress Analysis of the Die during High Pressure Casting
Droplet Transfer Analysis of Intermittent Pulsed Arc Welding Used to Repair the Metal Defects
Compact and Precise Gonio-Stage for Thin Film Measurements by Using Glancing Incident Synchrotron X-Ray
The Antiplane Shearing Problem of Circular Holes with 2k Periodic Cracks in One-Dimensional Hexagonal Quasicrystals
Research of the Finishing Needle Automatic Processing Based on the LabVIEW
Chapter 13: Mineral Mining and Processing
Adsorption Characteristics of Different Stratification in the Coal Reservoirs of Southern Qinshui Basin and its Main Controlling Factors
Coal Reservoir Property Differences Analysis of Different Macrolithotype in Liulin Mining Area
Organic Intercalation of Kaolinite in Coal Bearing Strata
The Effects of Different Depressants on Oxidised Copper Ores Flotation
3D Microfacies Modeling of Tight Gas Reservoir: A Case from Changling Block, Jilin Oilfield
The Remaining Oil Distribution and Main Controlling Factor Analysis of Inefficient Reserves in Complex Fault Block
Chapter 14: Electronics Systems and Technologies
Design Printable Pressure Sensor Based on 3DP Fabrication
Pattern Recognition Controller Based on Fuzzy Neural Network
PSPICE Simulation of IGCT and its Inverter Circuit
Research on a Novel Balance Transformer with Asymmetrical Windings
Research on the Solid Thin Film Lithium-Ion Battery Integrated on-Chip
The One-Step ADI-FDTD for Periodic Structures and its Stability
The Top Loading Antenna with Fractal Photonic Crystal Used in TD-LTE System
Design of a Functional Signal Generator Based on MAX038 and Microcontroller
GPS Positioning System Design Based on Micro Control Unit
Multi-CPU Parallel Computing System with Mixed Modes
The Optimal Control Method of Impulse Response in Prosthetic Leg
Chapter 15: Signal and Data Processing Technology
A Cooperative Positioning Scheme Based on Extended Kalman Filter for Curve Warning Systems
A Hybrid Approach for Stripe Noise Removal in Frequency Domain
Heat Flow Calculation Based on Seismic Data
Hysteresis Modeling of Soft Magnetic Materials Using LabVIEW
Lyapunov-Index Application and Time-Frequency Analysis in Medical EEG
Multifractal-Based Texture Analysis for SAR Images
Rolling Element Bearing Diagnosis Based on Signal Reconstruction from Edited Cepstrum
Simulation Research about Signals Processing of Optic Fiber Sensor Array Sensitive to Heavy Metal Ions
Structure Analysis of Volcanic Rock Based on the Texture Feature in Imaging Logging
Surface Displacement Measurement of Soil Mass by White Light Digital Image Analysis in Frequency Domain
Data Visualization Measurement in Location-Based Service
A Calculation Model for On-Line Monitoring of Conductor Galloping Based on the Length Method
Chapter 16: Algorithms and Analysis
A Hierarchical and Clustering Strategy for Routing in WSN Based on Ant Colony Optimization
An Improved Method of the Adaptive Hierarchical Space Partition Simplification Algorithm on the Point-Based Model
Books Rank with Modified PageRank Algorithm
Fault Diagnosis Method Based on KPCA and Selective Neural Network Ensemble
Kinematical Modeling for Terrain Following Algorithm of Vehicles Moving on the Ground
Study on Energy-Saving Efficient Resource Scheduling Optimization Algorithm in Cloud Computing
Study on the Prediction of Line Loss Rate Based on the Improved RBF Neural Network
The Primitive Exponent of a Class of Special Nonnegative Matrix Pairs
The Research of Orthogonal Symmetric Matrix-Valued Wavelets Packets with Multiscale and Applications
The Triangle Network Based Precise Correction Method and its Algorithm
Chapter 17: Information and Computation Technologies and Applications
A New Intrusion Detection Method Based on Rough Sets for Network Security
An Robust Video Watermarking against Collusion Attacks
Application of K-Means Algorithm with Person Coefficient in Colleges Physical Education
Applied Technology in Analysis of Status Quo of University Library Social Network Service and the Treatment Countermeasures
Boost Keywords Conversion of Search Engine
Constructing Elliptic Curves over Ramanujan's Class Invariants
Intelligent Path Analysis System about Based on the Sharing Information of Highway
Method of Inserting Barcodes in DWG Files Based on ActiveX Automation Technology
Modeling and Reasoning about States in Late Launch Based on Horn Clauses
Quality Assessment of the Retrieval System Based on Web-Related Degree
Regional Education Development Research Based on Robust Principal Component Analysis
Research and Design of SaaS-Based Conference Service Platform
Scenic Management System Based on Number of Visitors
Special Database System Design Using Sector Organization and Server Clustering Techniques
Task Scheduling and Resource Allocation of Cloud Computing Based on QoS
The Design and Implementation of Data Independence in the CSP Model of Security Protocol
The Research of Energy Consumption Control of Tobacco Information Based on Cloud Computing
The Research of Oil Fields Heterogeneous Data Management Technology
The User Interface Design of Lifting Equipment Based on MATLAB
Development of Computerize Value Stream System
The Bivariate Minimum-Energy Tight Wavelet Frames and Applications in Economics and Management
The Inter-Datacenter Connection in SDN and Traditional Hybrid Network
Designed on Information Security Systems for Mobile Databases
The Research of the Car Following Behavior Model in VANET
Optimum Load Dispatching Model in Intelligent Distribution Network
The Research of Production Split Using Well Logging and Well Testing Method
Comparisons of Two Methods for Regional Dividing Technology of Liquefaction Based on ArcGIS
Parameterization of Masks for Tight Wavelet Frames and Multiple Pseudoframes and Applications in Mechanical Engineering
A New Functional Approach for Searching Optimal Reservoir Rule Curves
Calculation Method on Process Capability Index of True Position Based on Maximum Material Condition
Distributed SWAT Model for Ecological Remediation Project Assessment
Research on Intelligent Collaborative System for Auto Parts Industry
Small Shifts Quality Control Schemes under MMSE Feedback Adjustment
Chapter 18: Industrial Engineering and Engineering Management
Application of CDIO Idea in Engineering Training
Logistics Business Optimization of Small and Medium-Sized Garment Manufacturing
Study of Minimal Power Demand and Life Sustainable Time in the Residential Sector during Power Failure (in Korea)
Study on Development Model of Engineering Manufacturing
Supply Chain Risk Identification Based on State Space
The Applying of Grey Correlation Degree Theory on Quantitative Area Risk Assessment
Research on the Budgetary Slack Behavior to the Construction Machinery and Equipment Manufacturing Enterprise in China
Research and Development of Project Management System for Mechanical Products
Research on Training Strategy of College Teacher's Information Literacy in Information Environment
Concurrent Decision-Making of Product Architecture and Supply Chain Configuration
Game Analysis of Reverse Supply Chain Based on Government Regulation
Wind Power Forecasting Based on Improved Biased Wavelet Neural Network
Improve the Efficiency of RM80 Ballast Cleaning Machine
Study on Prediction Technology for Type Test Demand of Construction Machinery
「Nielsen BookData」 より
