THERMEC 2013 supplement : selected, peer reviewed papers from the 8th International Conference on Processing & Manufacturing of Advanced Materials : processing, fabrication, properties, applications, December 2-6, 2013, Las Vegas, USA
Author(s)
Bibliographic Information
THERMEC 2013 supplement : selected, peer reviewed papers from the 8th International Conference on Processing & Manufacturing of Advanced Materials : processing, fabrication, properties, applications, December 2-6, 2013, Las Vegas, USA
（Advanced materials research, v. 922）
Trans Tech Publications, c2014
- : pbk
Available at / 1 libraries
-
No Libraries matched.
- Remove all filters.
Note
Includes bibliographical references and indexes
Description and Table of Contents
Description
THERMEC proceedings is collection of research papers from active /known researchers in materials science /engineering , manufacturing, processing and applications of advanced materials ranging from ferrous an d non ferrous materials to biomaterials,nanomaterials, metallic glasses, fuel cels,hydrogen storage technologies, surface engineering, welding and joining, modeling & simulation and intelligent & smart materials/ processes.
Table of Contents
Preface, Committees and Acknowledgements
Cytocompatibility of Magnesium-Zinc-Calcium Alloys with Bone Marrow Derived Mesenchymal Stem Cells
Simulation of Yield Strength in Allvac (R) 718PlusTM
Corrosion Behaviour of AISI 304 Stainless Steel with Solar Salt Heat Transfer Fluid
Comparison of Material Flow Stress Models toward More Realistic Simulations of Friction Stir Processes of Mg AZ31B
Characterization of Morphology Controlled Fluorine-Doped Tin Oxide Thin Films
Martensitic Transformation and Related Properties of AuTi-FeTi Pseudobinary Alloys
A Phase-Field Model for the Formation of Martensite and Bainite
Approvement of "Tension-Compression" Technique Developed for Physical Simulation of Multistage Metal Plastic Deformation Processing
A Positron Emission Particle Tracking (PEPT) Study of Inclusions in Liquid Aluminium Alloy
Influence of Deformation Rate on Mechanical Response of an AISI 316L Austenitic Stainless Steel
Microstructure Evolution of Martensitic Ti-6Al-4V Alloy during Warm Deformation
High Temperature Oxidation Behavior of CM-247LC Nickel Base Superalloy
Hybrid Structure of TiO2 Nanofiber and Nanoparticle for Dye-Sensitized Solar Cells
Effect of TiO2 Nanotube Arrays on Osseointegration for Dental Implant
Structure, Microstructure, and Selected Mechanical Properties of Ti-Zr-Mo Alloys for Biomedical Applications
Effects of Annealing on Microstructure and Properties of Cu-Nb Wires
Mechanical Properties and Precipitation Behavior of Ti-Mo Microalloyed Medium-Carbon Steel during Ultrafast Cooling Process
New Generation TMCP Technology and its Application to 960 MPa High Strength Structural Steel Plates
Evaluation of the Effect of TiC Precipitates on the Hydrogen Trapping Capacity of Fe-C-Ti Alloys
Effect of Tensile Twinning on Low Temperature Shear Formability of Mg-3Al-1Zn Alloy
Study of the Influence of Plastic Deformation on Metastable Phases of CuAlBe Shape Memory Alloy by Neutron Diffraction
Hall-Petch Relationship in an Al-Mg-Sc Alloy Subjected to ECAP
In Situ Synchrotron Diffraction Studies on Hot Deformation of Austenite in a High Strength Quenched and Tempered Structural Steel
Electrothermomechanical Processing of High Carbon Steels
Effect of Zr Addition on Martensitic Transformation in TiMoSn Alloy
Life Prediction of High-Temperature MCrAlY Coatings Based on Microstructural Observations
Occurrence of Dynamic Alpha-Phase Nucleation in Ti-5553 during Hot Deformation
Evolution of Laves-Phase Particles in a Low Carbon 9%Cr Martensitic Steel during Creep at 650 DegreesC
Embrittlement of Steels by Liquid Zinc: Crack Propagation after Grain Boundary Wetting
X-Ray Residual Stress Analysis of Stainless Steel Using cos Method
Monitoring of Tempering Behavior in Fe-C-Mn Alloys by Precise Measurement of Electrical Resistivity
Residual Stress Measurements in Multi-Pass Welded High Strength Steel Using Energy Dispersive Synchrotron X-Ray Diffraction
Effects of Thermomechanical Treatments on Microstructure and Mechanical Behavior of HCS/LCS Bimetal
Effect of Plastic Deformation on a Dispersion of Omega-Phase and Mechanical Properties of an Al-Cu-Mg-Ag Alloy
Effect of Carbon Gradient on the Microstructure and Mechanical Properties of Fe-22Mn-C TWIP/TRIP Steels
Relevance of Hot Ductility Tests to Crack Sensitivity during Continuous Casting of Steel
Thermomechanical Ageing of Copper-Clad Aluminum Wires Submitted to Creep Test Conditions
Application of Texture Analysis for Optimizing Thermo-Mechanical Treatment of a High Mn TWIP Steel
Cu/Cu Direct Bonding by Metal Salt Generation Bonding Technique with Formic Acid and Citric Acid
Influence of the Partitioning Treatment on the Mechanical Properties of a 0.3C-1.5Si-3.5Mn Q&P Steel
Possible Orbital-Ordered State in the Highly-Correlated Electronic Material Sr1-xCexMnO3
Preparatory Electrodeposition Process for High Purity Bulk Aluminum
Microstructure of Oxide Scale on Hot-Rolled Iron
Structural Analysis of Shape Memory Gel
Optimization of a Closed Die Forging Process to Manufacture a Gear Wheel by the Use of a Response Surface Model
Determination of Preferred Morphology of Self-Accommodating Martensite in Ti-Nb-Al Shape Memory Alloy Using Optical Microscopy
Compression of Single-Crystal Micropillars of the Intermetallic Phase in the Fe-Zn System
Polymer/Metal Joining with Carbon Fibers with High Resistance to Pull-Out Induced by Huge Friction Force Generated by Extremely Broad Total Interface Area
X-Ray Residual Stress Analysis of Nickel Base Alloys
Effect of Process Parameters on Friction Surfaced Coating Dimensions
Feasibility Study on Die Quenching of AA2024 Aluminum Alloy Billet Using Servo Press
Investigation of Biodegradable Composite Coated Magnesium Alloy Using Optical Coherence Tomography
Effect of Retained Austenite on Impact Toughness of the Multi-Phase Bainitic-Martensitic Steel
Effect of Precipitation on Texture Evolution during Dynamic Recrystallization in Mg-Al-Sn Alloys
Thermodynamic Modeling and Experimental Measurement of Precipitation Formation during Dynamic Recrystallization for Magnesium Alloys
Tempering of Direct Quenched Low-Alloy Ultra-High-Strength Steel, Part I - Microstructure
Effects of Ni and Co Additions to Filler Metals on Ag-Brazed Joints of Cemented Carbide and Martensitic Stainless Steel
Effect of Small Addition of Si on Superplastic Elongation at Room Temperature in Zn-Al Eutectoid Superplastic Alloy
Ultrasonic Spot Welding of Galvanized Steel Sheet
The Age-Hardening Mechanism of Nanocrystalline Ni-P Alloys Synthesized by Electrodeposition
Microstructural Evolution of AA5052 Alloy Sheets in High-Speed Rolling
Strengthening and Toughening Mechanisms in Martensitic Steel
Hybrid Structure of TiO2 Nanofiber and Nanoparticle for Dye-Sensitized Solar Cells
Contributions of Grain Boundary Sliding and Solute Drag Creep to High-Temperature Ductility in Fine-Grained Polycrystalline 5083 Alloys
Effects of Cooling Rate on Impact Toughness of an Ultrahigh-Strength TRIP-Aided Martensitic Steel
Relationship between Strength and Grain Size of Friction Stir Processed and Annealed High Purity Aluminum
Crystallographic Features of the Charge-Orbital-Ordered State in the Highly-Correlated Electronic System Ca1-xPrxMnO3
Numerical Analysis of Gas Tungsten Arc Welding with a Constricted Nozzle for Butt Joint of Thin-Sheet Metals
Effect of Cold Rolling on Microstructure and Mechanical Properties of an Al-Mg-Sc-Zr Alloy
Effect of Cold Rolling on Microstructure and Mechanical Properties of a Fe-23Mn-0.3C-1.5Al TWIP Steel
The Influence of Morphology on the Hydrogen Storage Properties of Magnesium Based Materials Processed by Cold Rolling
Thermo-Kinetic Simulation of the Yield Strength Evolution of AA7075 during Natural Aging
Microstructural Characterization of Hydrogen Induced Cracking in TRIP Steels by EBSD
Phase Transformations of TIMETAL-18 as a New Titanium Alloy with Bimodal Microstructure
Wear Properties of Ti-6Al-4V/Ti-29Nb-13Ta-4.6Zr Combination for Spinal Implants
The Effect of Si on the Intermetallics Formation during Hot Dip Aluminizing
Anodic Bonding Mechanism of Pyrex Glass and Kovar Alloy and its Residual Stress Analysis
Effects of Electropulsing on the Microstructure Evolution of 316L Stainless Steel
Description of Surface Energy Anisotropy for BCC Metals
Study of Damage Mechanisms in Cold-Sprayed 316L-Matrix Composite Coatings Using Novel Impact-Sliding Testing
Effect of Strain Hardening on the Joint Efficiency of an Al-Mg-Sc-Zr Alloy Subjected to Friction Stir Welding
Morphology of Edge Cracks of Rolled Magnesium Alloy Sheet
Effect of Composition and Thermo-Mechanical Processing on Microstructure Development in Ni-30Fe-Nb-C Model Alloys
Magnetic Pulse Spot Welding: An Innovative Approach
Effect of HPT on Age-Hardening Behavior in Cu-Added Excess Mg-Type Al-Mg-Si Alloys
Solid State Bonding of Al Alloy/SUS304 by Metal Salt Generation Bonding Technique with Acetic Acid
High Tensile Ductility in Electrodeposited Bulk Nanocrystalline Ni-W Alloys
HRTEM Observation of Age-Precipitation in Mg-2.9at.% Alloys
Experimental and FEM Studies of the Relationships between Equal-Channel Angular Pressing Die Design, Strain Distribution and Pressing Forces
Surface Characterization of Magnesium Anodized in a 10M KOH Electrolyte
Effect of Axial Force on Corrosion Behavior of SUS304 Stainless Steel Bolt
Crystallographic Features of the Phase in the Mn-Si Binary Alloy System
Finite Element Analysis of Material Flow and Characterization of Tube Dimensions of Indirectly Extruded Tailored Aluminum Tubes
Effect of Rolling on Microstructure and Room Temperature Tensile Properties of Newly Developed Mg-4Li-1Ca Alloy
Characterization of Magnesium Alloy Degradation in Whole Blood and Platelet Rich Plasma
Effect of Zn/Mg on Age Hardening Behavior in 7000 System Al Alloys
A Review on Thermomechanical Models of Friction Stir Welding
Effect of Cu/Ag Addition on Age-Precipitation in Two Step Aged Al-Mg-Si Alloys
Cost Cut with High Impact Value of Sandwich Structure with Inexpensive ABS Core between High Strength CFRP Laminate Plies
Microstructural Control of Ductile Crack Propagation in TMCP HSLA Pipeline Steels
Influence of Impurities on Mechanical Properties of Electrodeposited Bulk Nanocrystalline Al
Tempering of Direct Quenched Low-Alloy Ultra-High-Strength Steel, Part II - Mechanical Properties
RETRACTED: Modeling Mechanical Milling Process for Synthesis of Graphite Nanoparticles and their Characterization
Analysis of Plastic Deformation and Sample Geometry during the Compression Stage in High-Pressure Torsion
On the Behavior of Yttria/Yttrium during Mechanical Alloying of a Fe - Y2O3 Model Alloy System
Interaction of V, Al, and N in Microalloyed Forging Steels after Hot Deformation
An Investigation of Mechanical Properties and Microstructural Evolution in an Aluminum Alloy Processed by Severe Plastic Deformation
Influence of Low Cu Addition on Quench Sensitivity in Al-Mg-Si Alloys
Effect of Heat Treatment Condition on Texture in Ti-Mo-Al-Zr Shape Memory Alloy
Characteristic Features of the C-Type Orbital-Ordered State in the Simple Perovskite Manganite Sr1-xNdxMnO3
Effect of Uniaxial Compressive Stress during Formation of Porous Aluminum by Mechanochemical Reaction on its Mechanical Properties
Variation of Mechanical Properties of AlSi20Cu2Ni1 Alloy with Co Addition and Ultrasonic Treatment
Determination of Substitutional-Interstitial Interaction from Chemical Potentials of Interstitials in the Steel Matrix
Structure and Properties of Cu Alloys Alloying with Cr and Hf after Equal Channel Angular Pressing
Effect of Annealing on Microstructure of Hydroxyapatite Coatings and their Behaviours in Simulated Body Fluid
Influence of Filler Rod Composition on the Strength of Tungsten Inert Gas Welded Magnesium Alloy Joint
Microstructure of Er2O3 Coating Layer of Hydrogen Penetration Control
Design and Fabrication of New Ti-Based Ternary Metallic Glasses Based on Effective Atomic Radius in the Ti Solid Solution Calculated by Ab Initio Calculation
The Correlation between Stacking Fault Energy and the Work Hardening Behaviour of High-Mn Twinning Induced Plasticity Steel Tested at Various Temperatures
Combined Martensite and Bainite Formation from Austenite Decomposition in HSLA Steel
Microstructure and Residual Stress Formation during Friction-Stir Welding of Semi-Solid Cast ZK60-RE Magnesium Alloy
Casting in the Semi-Solid State of ZK60 Magnesium Alloy Modified with Rare Earth Addition
Analysis of Recrystallization and Strain-Induced Precipitation on High Nb- and N-Bearing Austenitic Stainless Steel
Two-Step Brittle-to-Ductile Transitions in Pearlitic Steels
Effect of Cobalt Addition on the Deformation and Recrystallization Textures of Polycrystalline IN713C Nickel Based Superalloy
Microstructural Evolution of Martensite Phase in Fe-Ni Alloy Depending on Temperature of Tensile Deformation
Corrosion Behavior of Engineering Materials in Flow Field
Simulation of Cu Precipitation in the Fe-Cu Binary System
Plastic Deformation and Elastic Properties of Ti-Nb-Zr-Ta(-Fe-Si) Biomedical Alloys
Clarification of Extremely High R-Value Mechanism of the Electro-Deposited Pure Iron
Effect of Si and Ge Addition on the Evolution of Microstructure in Near Alpha Titanium Alloy
Dislocation Creep in Al-22.2, 53.6 and 101 at.ppm Fe Solid Solution Alloys
The Effects of Heating Rate and Cold Work on the Development of Dual-Phase Steel Microstructures
Electrophoretic Deposition and Characterization of Biocomposites on Magnesium for Orthopedic Applications
Mechanical Properties of ZK60 Magnesium Alloy Processed by High-Pressure Torsion
Effect of Cooling Rate after High Temperature Nitriding on Transformation Microstructure in Low Carbon Steel
In Situ Observation of Fracture Behavior of CrN/Cr Film during Three-Point Bending Test
Elemental Clustering and Structure of Liquid LBE
TEM Observation for Precipitates Structure of Aged Al-Zn-Mg Series Al Alloys Addition of Cu or Ag
Modelling High Integrity Steel Forgings for Turbine Applications in the Power Generation Industry
Application of a Novel Entrainment Defect Model to a High Pressure Die Casting
Constitutive Analysis and Microstructure Evolution of the High-Temperature Deformation Behavior of an Advanced Intermetallic Multi-Phase -TiAl-Based Alloy
Bainitic Forging Steels for Cyclic Loading
Tensile Fracture Characteristics of a Single Crystal Nickel-Based Superalloy
Nitrogen-Enhanced Nanostructural Evolution and its Effect on Phase Stability in Biomedical Co-Cr-Mo Alloys
Interface Migration with Segregation in MoSi2-Based Lamellar Alloy Simulated by Phase-Field Method
EB-Irradiation Induced Strengthening of Carbon Fiber Reinforced Thermoplastic Polymers
Mechanical Properties at Elevated Temperatures of an S304H-Type Austenitic Stainless Steel Processed by Warm Rolling
Interdiffusion and Microstructure Simulation in Ni and Co Based Overlay Coatings on a Ni Based Superalloy at High Temperatures
Microstructural and Mechanical Characterizations of a Ductile Metastable Titanium Alloy Subjected to Low Temperature Annealing
Effect of Grain Size on Cryogenic Mechanical Properties of an Al-Mg-Sc Alloy
by "Nielsen BookData"