THERMEC 2013 supplement : selected, peer reviewed papers from the 8th International Conference on Processing & Manufacturing of Advanced Materials : processing, fabrication, properties, applications, December 2-6, 2013, Las Vegas, USA

著者

    • International Conference on Processing & Manufacturing of Advanced Materials
    • Mishra, B.
    • Ionescu, M.

書誌事項

THERMEC 2013 supplement : selected, peer reviewed papers from the 8th International Conference on Processing & Manufacturing of Advanced Materials : processing, fabrication, properties, applications, December 2-6, 2013, Las Vegas, USA

edited by B. Mishra, M. Ionescu and T. Chandra

(Advanced materials research, v. 922)

Trans Tech Publications, c2014

  • : pbk

大学図書館所蔵 件 / 1

この図書・雑誌をさがす

注記

Includes bibliographical references and indexes

内容説明・目次

内容説明

THERMEC proceedings is collection of research papers from active /known researchers in materials science /engineering , manufacturing, processing and applications of advanced materials ranging from ferrous an d non ferrous materials to biomaterials,nanomaterials, metallic glasses, fuel cels,hydrogen storage technologies, surface engineering, welding and joining, modeling & simulation and intelligent & smart materials/ processes.

目次

Preface, Committees and Acknowledgements Cytocompatibility of Magnesium-Zinc-Calcium Alloys with Bone Marrow Derived Mesenchymal Stem Cells Simulation of Yield Strength in Allvac (R) 718PlusTM Corrosion Behaviour of AISI 304 Stainless Steel with Solar Salt Heat Transfer Fluid Comparison of Material Flow Stress Models toward More Realistic Simulations of Friction Stir Processes of Mg AZ31B Characterization of Morphology Controlled Fluorine-Doped Tin Oxide Thin Films Martensitic Transformation and Related Properties of AuTi-FeTi Pseudobinary Alloys A Phase-Field Model for the Formation of Martensite and Bainite Approvement of "Tension-Compression" Technique Developed for Physical Simulation of Multistage Metal Plastic Deformation Processing A Positron Emission Particle Tracking (PEPT) Study of Inclusions in Liquid Aluminium Alloy Influence of Deformation Rate on Mechanical Response of an AISI 316L Austenitic Stainless Steel Microstructure Evolution of Martensitic Ti-6Al-4V Alloy during Warm Deformation High Temperature Oxidation Behavior of CM-247LC Nickel Base Superalloy Hybrid Structure of TiO2 Nanofiber and Nanoparticle for Dye-Sensitized Solar Cells Effect of TiO2 Nanotube Arrays on Osseointegration for Dental Implant Structure, Microstructure, and Selected Mechanical Properties of Ti-Zr-Mo Alloys for Biomedical Applications Effects of Annealing on Microstructure and Properties of Cu-Nb Wires Mechanical Properties and Precipitation Behavior of Ti-Mo Microalloyed Medium-Carbon Steel during Ultrafast Cooling Process New Generation TMCP Technology and its Application to 960 MPa High Strength Structural Steel Plates Evaluation of the Effect of TiC Precipitates on the Hydrogen Trapping Capacity of Fe-C-Ti Alloys Effect of Tensile Twinning on Low Temperature Shear Formability of Mg-3Al-1Zn Alloy Study of the Influence of Plastic Deformation on Metastable Phases of CuAlBe Shape Memory Alloy by Neutron Diffraction Hall-Petch Relationship in an Al-Mg-Sc Alloy Subjected to ECAP In Situ Synchrotron Diffraction Studies on Hot Deformation of Austenite in a High Strength Quenched and Tempered Structural Steel Electrothermomechanical Processing of High Carbon Steels Effect of Zr Addition on Martensitic Transformation in TiMoSn Alloy Life Prediction of High-Temperature MCrAlY Coatings Based on Microstructural Observations Occurrence of Dynamic Alpha-Phase Nucleation in Ti-5553 during Hot Deformation Evolution of Laves-Phase Particles in a Low Carbon 9%Cr Martensitic Steel during Creep at 650 DegreesC Embrittlement of Steels by Liquid Zinc: Crack Propagation after Grain Boundary Wetting X-Ray Residual Stress Analysis of Stainless Steel Using cos Method Monitoring of Tempering Behavior in Fe-C-Mn Alloys by Precise Measurement of Electrical Resistivity Residual Stress Measurements in Multi-Pass Welded High Strength Steel Using Energy Dispersive Synchrotron X-Ray Diffraction Effects of Thermomechanical Treatments on Microstructure and Mechanical Behavior of HCS/LCS Bimetal Effect of Plastic Deformation on a Dispersion of Omega-Phase and Mechanical Properties of an Al-Cu-Mg-Ag Alloy Effect of Carbon Gradient on the Microstructure and Mechanical Properties of Fe-22Mn-C TWIP/TRIP Steels Relevance of Hot Ductility Tests to Crack Sensitivity during Continuous Casting of Steel Thermomechanical Ageing of Copper-Clad Aluminum Wires Submitted to Creep Test Conditions Application of Texture Analysis for Optimizing Thermo-Mechanical Treatment of a High Mn TWIP Steel Cu/Cu Direct Bonding by Metal Salt Generation Bonding Technique with Formic Acid and Citric Acid Influence of the Partitioning Treatment on the Mechanical Properties of a 0.3C-1.5Si-3.5Mn Q&P Steel Possible Orbital-Ordered State in the Highly-Correlated Electronic Material Sr1-xCexMnO3 Preparatory Electrodeposition Process for High Purity Bulk Aluminum Microstructure of Oxide Scale on Hot-Rolled Iron Structural Analysis of Shape Memory Gel Optimization of a Closed Die Forging Process to Manufacture a Gear Wheel by the Use of a Response Surface Model Determination of Preferred Morphology of Self-Accommodating Martensite in Ti-Nb-Al Shape Memory Alloy Using Optical Microscopy Compression of Single-Crystal Micropillars of the Intermetallic Phase in the Fe-Zn System Polymer/Metal Joining with Carbon Fibers with High Resistance to Pull-Out Induced by Huge Friction Force Generated by Extremely Broad Total Interface Area X-Ray Residual Stress Analysis of Nickel Base Alloys Effect of Process Parameters on Friction Surfaced Coating Dimensions Feasibility Study on Die Quenching of AA2024 Aluminum Alloy Billet Using Servo Press Investigation of Biodegradable Composite Coated Magnesium Alloy Using Optical Coherence Tomography Effect of Retained Austenite on Impact Toughness of the Multi-Phase Bainitic-Martensitic Steel Effect of Precipitation on Texture Evolution during Dynamic Recrystallization in Mg-Al-Sn Alloys Thermodynamic Modeling and Experimental Measurement of Precipitation Formation during Dynamic Recrystallization for Magnesium Alloys Tempering of Direct Quenched Low-Alloy Ultra-High-Strength Steel, Part I - Microstructure Effects of Ni and Co Additions to Filler Metals on Ag-Brazed Joints of Cemented Carbide and Martensitic Stainless Steel Effect of Small Addition of Si on Superplastic Elongation at Room Temperature in Zn-Al Eutectoid Superplastic Alloy Ultrasonic Spot Welding of Galvanized Steel Sheet The Age-Hardening Mechanism of Nanocrystalline Ni-P Alloys Synthesized by Electrodeposition Microstructural Evolution of AA5052 Alloy Sheets in High-Speed Rolling Strengthening and Toughening Mechanisms in Martensitic Steel Hybrid Structure of TiO2 Nanofiber and Nanoparticle for Dye-Sensitized Solar Cells Contributions of Grain Boundary Sliding and Solute Drag Creep to High-Temperature Ductility in Fine-Grained Polycrystalline 5083 Alloys Effects of Cooling Rate on Impact Toughness of an Ultrahigh-Strength TRIP-Aided Martensitic Steel Relationship between Strength and Grain Size of Friction Stir Processed and Annealed High Purity Aluminum Crystallographic Features of the Charge-Orbital-Ordered State in the Highly-Correlated Electronic System Ca1-xPrxMnO3 Numerical Analysis of Gas Tungsten Arc Welding with a Constricted Nozzle for Butt Joint of Thin-Sheet Metals Effect of Cold Rolling on Microstructure and Mechanical Properties of an Al-Mg-Sc-Zr Alloy Effect of Cold Rolling on Microstructure and Mechanical Properties of a Fe-23Mn-0.3C-1.5Al TWIP Steel The Influence of Morphology on the Hydrogen Storage Properties of Magnesium Based Materials Processed by Cold Rolling Thermo-Kinetic Simulation of the Yield Strength Evolution of AA7075 during Natural Aging Microstructural Characterization of Hydrogen Induced Cracking in TRIP Steels by EBSD Phase Transformations of TIMETAL-18 as a New Titanium Alloy with Bimodal Microstructure Wear Properties of Ti-6Al-4V/Ti-29Nb-13Ta-4.6Zr Combination for Spinal Implants The Effect of Si on the Intermetallics Formation during Hot Dip Aluminizing Anodic Bonding Mechanism of Pyrex Glass and Kovar Alloy and its Residual Stress Analysis Effects of Electropulsing on the Microstructure Evolution of 316L Stainless Steel Description of Surface Energy Anisotropy for BCC Metals Study of Damage Mechanisms in Cold-Sprayed 316L-Matrix Composite Coatings Using Novel Impact-Sliding Testing Effect of Strain Hardening on the Joint Efficiency of an Al-Mg-Sc-Zr Alloy Subjected to Friction Stir Welding Morphology of Edge Cracks of Rolled Magnesium Alloy Sheet Effect of Composition and Thermo-Mechanical Processing on Microstructure Development in Ni-30Fe-Nb-C Model Alloys Magnetic Pulse Spot Welding: An Innovative Approach Effect of HPT on Age-Hardening Behavior in Cu-Added Excess Mg-Type Al-Mg-Si Alloys Solid State Bonding of Al Alloy/SUS304 by Metal Salt Generation Bonding Technique with Acetic Acid High Tensile Ductility in Electrodeposited Bulk Nanocrystalline Ni-W Alloys HRTEM Observation of Age-Precipitation in Mg-2.9at.% Alloys Experimental and FEM Studies of the Relationships between Equal-Channel Angular Pressing Die Design, Strain Distribution and Pressing Forces Surface Characterization of Magnesium Anodized in a 10M KOH Electrolyte Effect of Axial Force on Corrosion Behavior of SUS304 Stainless Steel Bolt Crystallographic Features of the Phase in the Mn-Si Binary Alloy System Finite Element Analysis of Material Flow and Characterization of Tube Dimensions of Indirectly Extruded Tailored Aluminum Tubes Effect of Rolling on Microstructure and Room Temperature Tensile Properties of Newly Developed Mg-4Li-1Ca Alloy Characterization of Magnesium Alloy Degradation in Whole Blood and Platelet Rich Plasma Effect of Zn/Mg on Age Hardening Behavior in 7000 System Al Alloys A Review on Thermomechanical Models of Friction Stir Welding Effect of Cu/Ag Addition on Age-Precipitation in Two Step Aged Al-Mg-Si Alloys Cost Cut with High Impact Value of Sandwich Structure with Inexpensive ABS Core between High Strength CFRP Laminate Plies Microstructural Control of Ductile Crack Propagation in TMCP HSLA Pipeline Steels Influence of Impurities on Mechanical Properties of Electrodeposited Bulk Nanocrystalline Al Tempering of Direct Quenched Low-Alloy Ultra-High-Strength Steel, Part II - Mechanical Properties RETRACTED: Modeling Mechanical Milling Process for Synthesis of Graphite Nanoparticles and their Characterization Analysis of Plastic Deformation and Sample Geometry during the Compression Stage in High-Pressure Torsion On the Behavior of Yttria/Yttrium during Mechanical Alloying of a Fe - Y2O3 Model Alloy System Interaction of V, Al, and N in Microalloyed Forging Steels after Hot Deformation An Investigation of Mechanical Properties and Microstructural Evolution in an Aluminum Alloy Processed by Severe Plastic Deformation Influence of Low Cu Addition on Quench Sensitivity in Al-Mg-Si Alloys Effect of Heat Treatment Condition on Texture in Ti-Mo-Al-Zr Shape Memory Alloy Characteristic Features of the C-Type Orbital-Ordered State in the Simple Perovskite Manganite Sr1-xNdxMnO3 Effect of Uniaxial Compressive Stress during Formation of Porous Aluminum by Mechanochemical Reaction on its Mechanical Properties Variation of Mechanical Properties of AlSi20Cu2Ni1 Alloy with Co Addition and Ultrasonic Treatment Determination of Substitutional-Interstitial Interaction from Chemical Potentials of Interstitials in the Steel Matrix Structure and Properties of Cu Alloys Alloying with Cr and Hf after Equal Channel Angular Pressing Effect of Annealing on Microstructure of Hydroxyapatite Coatings and their Behaviours in Simulated Body Fluid Influence of Filler Rod Composition on the Strength of Tungsten Inert Gas Welded Magnesium Alloy Joint Microstructure of Er2O3 Coating Layer of Hydrogen Penetration Control Design and Fabrication of New Ti-Based Ternary Metallic Glasses Based on Effective Atomic Radius in the Ti Solid Solution Calculated by Ab Initio Calculation The Correlation between Stacking Fault Energy and the Work Hardening Behaviour of High-Mn Twinning Induced Plasticity Steel Tested at Various Temperatures Combined Martensite and Bainite Formation from Austenite Decomposition in HSLA Steel Microstructure and Residual Stress Formation during Friction-Stir Welding of Semi-Solid Cast ZK60-RE Magnesium Alloy Casting in the Semi-Solid State of ZK60 Magnesium Alloy Modified with Rare Earth Addition Analysis of Recrystallization and Strain-Induced Precipitation on High Nb- and N-Bearing Austenitic Stainless Steel Two-Step Brittle-to-Ductile Transitions in Pearlitic Steels Effect of Cobalt Addition on the Deformation and Recrystallization Textures of Polycrystalline IN713C Nickel Based Superalloy Microstructural Evolution of Martensite Phase in Fe-Ni Alloy Depending on Temperature of Tensile Deformation Corrosion Behavior of Engineering Materials in Flow Field Simulation of Cu Precipitation in the Fe-Cu Binary System Plastic Deformation and Elastic Properties of Ti-Nb-Zr-Ta(-Fe-Si) Biomedical Alloys Clarification of Extremely High R-Value Mechanism of the Electro-Deposited Pure Iron Effect of Si and Ge Addition on the Evolution of Microstructure in Near Alpha Titanium Alloy Dislocation Creep in Al-22.2, 53.6 and 101 at.ppm Fe Solid Solution Alloys The Effects of Heating Rate and Cold Work on the Development of Dual-Phase Steel Microstructures Electrophoretic Deposition and Characterization of Biocomposites on Magnesium for Orthopedic Applications Mechanical Properties of ZK60 Magnesium Alloy Processed by High-Pressure Torsion Effect of Cooling Rate after High Temperature Nitriding on Transformation Microstructure in Low Carbon Steel In Situ Observation of Fracture Behavior of CrN/Cr Film during Three-Point Bending Test Elemental Clustering and Structure of Liquid LBE TEM Observation for Precipitates Structure of Aged Al-Zn-Mg Series Al Alloys Addition of Cu or Ag Modelling High Integrity Steel Forgings for Turbine Applications in the Power Generation Industry Application of a Novel Entrainment Defect Model to a High Pressure Die Casting Constitutive Analysis and Microstructure Evolution of the High-Temperature Deformation Behavior of an Advanced Intermetallic Multi-Phase -TiAl-Based Alloy Bainitic Forging Steels for Cyclic Loading Tensile Fracture Characteristics of a Single Crystal Nickel-Based Superalloy Nitrogen-Enhanced Nanostructural Evolution and its Effect on Phase Stability in Biomedical Co-Cr-Mo Alloys Interface Migration with Segregation in MoSi2-Based Lamellar Alloy Simulated by Phase-Field Method EB-Irradiation Induced Strengthening of Carbon Fiber Reinforced Thermoplastic Polymers Mechanical Properties at Elevated Temperatures of an S304H-Type Austenitic Stainless Steel Processed by Warm Rolling Interdiffusion and Microstructure Simulation in Ni and Co Based Overlay Coatings on a Ni Based Superalloy at High Temperatures Microstructural and Mechanical Characterizations of a Ductile Metastable Titanium Alloy Subjected to Low Temperature Annealing Effect of Grain Size on Cryogenic Mechanical Properties of an Al-Mg-Sc Alloy

「Nielsen BookData」 より

関連文献: 1件中  1-1を表示

詳細情報

  • NII書誌ID(NCID)
    BB16578350
  • ISBN
    • 9783038350743
  • 出版国コード
    sz
  • タイトル言語コード
    eng
  • 本文言語コード
    eng
  • 出版地
    Durnten-Zurich
  • ページ数/冊数
    xx, 880 p.
  • 大きさ
    24 cm
  • 親書誌ID
ページトップへ