New technologies for engineering research and design in industry : selected, peer reviewed papers from the 2014 International Conference on Mechatronics and Intelligent Materials (MIM 2014), May 18-19, 2014, LiJiang, China
著者
書誌事項
New technologies for engineering research and design in industry : selected, peer reviewed papers from the 2014 International Conference on Mechatronics and Intelligent Materials (MIM 2014), May 18-19, 2014, LiJiang, China
（Advanced materials research, v. 971-973）
Trans Tech Publications, c2014
- : [set]
- Part 1
- Part 2
- Part 3
大学図書館所蔵 件 / 全1件
-
Part 1A25118/971-1400069867,
Part 2A25118/971-2400069875, Part 3A25118/971-3400069883 -
該当する所蔵館はありません
- すべての絞り込み条件を解除する
注記
Includes bibliographical references and indexes
"2014 The 4th International Conference on Mechatronics and Intelligent Materials 2014 (MIM2014), will be held in LiJiang, China during May 18-19, 2014."--pref.
内容説明・目次
内容説明
Collection of selected, peer reviewed papers from the 2014 International conference on Mechatronics and Intelligent Materials (MIM 2014), May 18-19, 2014, LiJiang, China.
The 617 papers are grouped as follows:
Chapter 1: Materials Science and Chemical Engineering,
Chapter 2: Applied Mechanics, Monitoring and Control. Mechanical and Industrial Engineering,
Chapter 3: Communication, Information Technologies, Signal and Data Processing,
Chapter 4: Building, Civil and Environmental Engineering,
Chapter 5: Management Engineering, Economics, Business, Logistics Engineering,
Chapter 6: New Technologies in Education and Sports
目次
Preface and Committee
Chapter 1: Materials Science and Chemical Engineering
A Novel Tin Oxide Based Thick-Film Sensor for Determining Sulfur Hexafluoride Decomposition Product Sulfur Dioxide
Annealed Treatment Effect on the Mechanical Properties of the Cf/SiC Composites Using Y2O3/ Al2O3 Additions
Aluminum Parts Based on Solidworks Edge Shape Analysis and Mold Design
Analysis of Factors Influencing the Flow Velocity of Heavy Oil Gravity Drive
Biomimetic Scaffolds Containing Chitosan and Hydroxyapatite for Bone Tissue Engineering
Comparative Study on the External Grind-Hardening Experiments of 40Cr Steel and 45 Steel
Composite Lining Aseismic Design for Fault-Crossing Tunnel Structures
Counting of Bacteria of Egg Surface by ATP Bioluminescence
Detection of Glass Transition in Poly(vinyl butyral) Thin Films with a Quartz Crystal Resonator on Different Overtones
Effect of Carbon Content on Microstructure and Properties of Gray Cast Iron
Effect of Different Packaging Films on Senescence of Kiwifruit
Effect of Initial Phosphorus Concentration on Chlorophyll a Contents and Extracellular Polysaccharides Contents of Scenedesmus quaclricauda in TGR
Effect of SO2 Interval Fumigation on Color and Antioxidant Activity of Red Grape
Effect of Y2O3/La2O3 Proportion on the Mechanical Properties of Cf/SiC Composites
Effect of ZrO2 Content on the Properties of Mg-HA Composites
Establishment and Experimental Identification of the Mathematic Model for Online Microwave Water Content in Iron Concentrate
First-Principles Study on Electronic Structure of 15R-SiC Polytypes
Functional Properties of Poly(lactide) Film Incorporated with Clove Essential Oil
Influence of Na2SiO3 Concentration on the Corrosion Behavior of TC4 Ceramic Coatings
Investigation on the Structural and Optical Properties of ZnO Thin Films Prepared by Sol-Gel Method
Modeling and Numerical Simulation Analysis of Chemical Plume in Flow Field
Modeling Research on the Hysteresis Nonlinearity of the Piezoelectric Ceramics Micropositioning Staging
Nonisothermal Crystallization Kinetics of Poly(m-xylylene adipamide)
Numerical Simulation and Experimental Validation of Bound Solute Dialysis in Artificial Liver Support Systems
Numerical Simulation Investigation on Single-Layer Multi-Tracks Laser Milling of Al2O3 Ceramic
Optical and Electrical Properties of P-Type ZnO Thin Film Post-Treated by Plasma-Enhanced Chemical Vapor Deposition
Phase Transition and Electronic Properties of LiBH4 via First-Principles Calculations
Preparation and Performance Characterization of "Turnjujube-Like" CdSe Nanofibers
Preparation of Low Molecular Weight Guar Gum for Fracturing by Enzymatic Degradation
Physical and Chemical Compositional Characterization of Six Apple Cultivars
Properties Study of Mixed Silane Films on the Surface of Steel
Rearch of Geometry Size Detection and Quality Control Method of Tower Materials
Recent Advances in the Study of Film Cooling on the Gas Turbine Blade
Research on the AC-13 Skeleton Dense-Graded Asphalt Mixtures by Fractal Theory
Research on the Properties and Defects of Carbon Nanotubes
Preparation of Pulse Electrodeposited Mo-Ni Coating
Structure and Acetylene Sensing Behavior of Zinc Oxide Nanowires Based Gas Sensor
Study of Two Kinds of Composite Reducing Agent in the Synthesis of -SiAlON
Study on Antisepsis and Preservation of Dapingding Jujube
Study on the Effects of Different Types of Carbon Black on the Performance of SBR2564S
Study on the Manufacturing Technology of Wood-Based Artificial Stone Composite Countertop for Integrated Cabinet
Study on the Technology of SO2 Fumigation in August Grapes
Sheet Metal Cover Drawing Forming Process Analysis
Synthesis, Characterization and Sulfur Dioxide Sensing Performances of Hierarchical Zinc Oxide Nanorods Based Sensor
The Analysis for Low Carbon Materials on Planning and Development Determinants
The Effect of Electroless Plating Time on the Coating Performance of SiC Powders
The Electronic and Structural Properties of 3C-SiC: A First-Principles Study
The Fabrication and Characterization of Interpenetrating SiC/Mg Composites
The Study of Microscale Effect Assessment in Micro Forming
Thermal Deep Drawing of Magnesium Alloy Sheets
Zirconium Hydrogen Phosphate/Sulfonated Poly(arylyene ether)s Composite Membrane for Direct Methanol Fuel Cells
Synthesis and Hemolytic Activity of Magnesium Hydroxide Nanoparticles
Tensile Test and Simulation of Woven Composite Laminates after High Velocity Impact
A New Foam Fracturing Fluid for CBM Reservoir
Effect of Heat Treatment on the Properties and Precipitations of High Strength Steel Plate for Construction Machinery
Enhancement of Ultraviolet Emission of ZnO Hollow Nanofibers
Experimental Analysis of the Sectional Temperature Distribution of CFST under Variable Temperature Effect
Research Progress of Magnetic Particle of Magneto-Rheological Fluid
Study on Sensing Properties of Magnetic Fluid and its Application
Study on Surface Dot Piting of Lingwu Long Jujubes
The Forming of Model Colloid System
Deformation Prediction of the Bipolar Plate Stamping
Glucose Prediction and Hypoglycemia Alarms Based on Adaptive Model
Identification of Ganoderma Lucidum Spore Powder and Ganoderma Lucidum Powder Based on Near-Infrared Spectroscopy and Cluster Analysis
The Research Least Squares Based on Ar Model of Glucose Prediction
Chapter 2: Applied Mechanics, Monitoring and Control, Mechanical and Industrial Engineering
The Impact of the Cutting Process on the Dimensional Accuracy of Expendable Patterns
Research on Flue Gas Temperature Monitoring in Acoustic Pyrometry of 200 MW Boiler Furnace
The Applications of BP Neural Network Based on MIV in Hydraulic Fracturing
Five-Axis CNC Processing Technology to Form Expendable Patterns
A Low Phase Noise and Low Spurious Frequency Source based on Programmable Frequency Dividers
A Novel Hydraulic Spherical Joint and Motion Analysis
A Piezoelectric Feeder with Magnetic Spring
A Study on Noise Test and Control of Combine Harvester
Accurate and Reset Turning Eccentric Eccentric Fixture Developed Parts
Acoustical Methods to Detect the Air Curtain of Black Smokers
Adaptive Feedback Control of Nonholonomic Systems with Uncertainties
Affect the Linkage Vibration Characteristic Parameter Analysis and Research
An Agent-Based On-Line Monitoring and Diagnosis System Machinery of Hot Strip Mill
An Elliptic Integral Solution to the Multiple Inflections Large Deflection Beams in Compliant Mechanisms
An Investigation on the Lift Mechanism of Flapping-Wing Air Vehicle
An Optimization Research on Four-Axis NC Machining Using UG Programming and VERICUT Simulation
Analysis and Design of Hoist Wire Rope Tension Monitoring System
Analysis and Simulation of Machine Tool Vibration Based on Magneto-Rheological Dampers
Analysis of Dynamic Characteristics of Excavator Working Device Based on ANSYS+Pro/E
Analysis of New Type Permanent Magnet Synchronous Motor Based on ANSYS
Analysis of Packer Rubber Mechanics Properties
Analysis of the Influence of Vibro-Acoustic Coupling Effect on the Floor Sound Insulation
Analysis on Application of Domestic CNC Machine Tools in the Field of Aviation
Analysis on Coordination of Loss of Excitation Protection, Out-of-Step Protection and Out-of-Step Splitting
Application Research on a Curved CAM Surface Reconstruction Method
Based on Pro/E4.0 and PDX's Rigid Sheet Stamping Mould Design
Based on the Nonlinear Dynamic Analysis of Linkage Vibration and Prevention
Car Progressive Stamping Molding Process Simulation and Process Optimization
Control System Design of a Hex-Rotor Aircraft Based on the Neural Network Sliding Mode Method
Coordinate Control of Vehicle Semi-Active Suspension Based on Adams/Car and Matlab/Simulink
Design and 3D Modeling System Development of a Classical V-Belt Drive
Design of a Walking System for the Pot-Seedling Hole-Forming Machine
Design of Distributed Electrode Switching Device for High Density Resistivity Instrument
Design of Swinging-Up Controller Based on LyapunovFunction and Fuzzy Control for Under-Actuated Mechanical System
Design of Two-Wheeled Self-Balanced Robot Based on Kalman Filter
Development and Application of a Synchronous Belt Drive Design System
Drive and Brake Joint Control of Acceleration Slip Regulation Road Test
Dynamic Simulation Analysis of Hydraulic Mechanical Power Split CVT
Effect Analysis of Particle Shape in Lunar Soil Drilling Process
Explore the Contour Turning Circular FANUC CNC System Based on Macro Program
Fault Diagnosis of Wind Turbine Bearings Based on Hilbert Space Feature Entropy
Fault Monitoring and Classification Method of Rolling Bearing Based on KICA and LSSVM
FEM Modal Analysis of Diesel Engine Block
Fracture Analysis of Hydraulic Pipe of Airplane
Geometrically Nonlinear Free Axisymmetric Vibrations Analysis of Thin Circular Functionally Graded Plates
Hardware System for Unmanned Surface Vehicle Using IPC
Helicopter Cable-Orientation Adaptive Fuzzy Control System Design Based on Ant Colony Optimization
Homogenization Technique for Non-Linear Free Vibrations Analysis of FGM Rectangular Plates
Implementation of Mean Shift Based on SOPC
Index Plate Special Milling Machine PLC Control System Design
Innovative Design and Simulation of a Four-Wire Flexible Manipulator
Large Amplitude Free Vibration Analysis of Functionally Graded Annular Plates
Latest Development of Accuracy Recession of Numerically-Controlled Machine Tools
Lift Performance of Wind Turbine with Blade Tip Loss
Modal Analysis of Artificial Granite Grinding Machine Tool Bed
Modal Analysis of Grasping Steel Mechanical Boom Based on ANSYS Workbench
Modeling of Diesel Engine Piston and Finite Element Mesh
Multi-Objective Frame Optimization Design of Steering Pump Bracket
Nondestructive Testing of the Wire Rope Fault Detection
Numerical Control Machine Tool Motion Simulation and Analysis of Parts of the Crawling Phenomenon
Numerical Simulation of Inclined Air/SF6 Interface Instability with Gas Kinetic Scheme
Numerical Simulation of Thermal Field in Subgrade of Passenger Dedicated Railway Line in Cold Region
Numerical Simulation on Air Flow Field of Tangential Longitudinal Axial Combine Harvester
NURBS Curved Surface 3D Numerical Modeling and Analysis of the Turbine Blade Based on UG
On the Application of Hall Sensor in Speed Measurement for DC Stepper Motor
Optimize of the Structure of the Grinding-Driller Based on Deform-3D
Planning and Simulation of the Rule-Based Trotting Gait of a Bionic Quadruped Robot
Radial Crushing System of Exhaust Pipe
Research and Application of Deburring in Continuous Casting Machine
Research and Application of Fuzzy Synthetic Evaluation Method about the Design Quality of Industrial Products
Research and Design of a Impact Drill Dust Collector
Research and Design of SWET Equipment for Engineering Machinery Company
Research Methods of the Performance of Plate Heat Exchanger
Research of Machine Tap
Research on Calculation of Intersecting Line of Curved Pipes that Based on UG
Research on Component Allocation Problem for Chip Mounter Based on MATLAB
Research on Cylinder Head Thermal State Simulation
Research on Leakage Measurement Methods of Coupling Clamps for Aircraft Tubing
Research on Structural Optimal Design of a Car Plastic Back Door
Research on Supercharging Thermal Parameters of T6190 Natural Gas Engine
Research on the Establishing Model Method of Engine Eternal Characteristic Curve Based on F Distribution
Research on the Evaluation of Small Sample Reliability for CNC Grinding Machine Tools Based on Bayes Theory
Research on the Springback Regularity of Curved Edge Bending
Rolling Bearing Fault Detection Method Based on Wavelet Packet Energy Spectrum - PLS
Rolling Bearings Fault Diagnosis Based on Generalized Demodulation Time-Frequency Analysis Method
Simulation and Springback Verification for Rubber Bladder Forming with a Definite Aircraft Part
Simulation of Wind Speed for an Large Offshore Wind Turbine
Sliding Mode Control for Wheeled Inverted Pendulum
Smart Electric Car System Design Feasibility Analysis
ST16 Oil Sump Stretching Technology and Die Design
Stable Control of Under-Actuated Mechanical System Acrobot
Stress Analysis and Optimization of the Hanging Centrifuge Drum Perforation
Study and Design of Lawn Brush Cutter
Study on Configuration Design of the Multi-Payload Adapter for One Vehicle with Multi-Satellite
Study on Damping Measures of Pump Piping Vibration Isolation Device
Study on the Mechanical Process of a Automobile Thin-Wall Parts
Study on the Simulation of Temperature Field of Diesel Engine
Study on the SNR Gain of RAKE Demodulator
Surf Shoaling and Breaking on Two-Slope Flume Experiments
The Analysis and Diagnosis of the Reason Engine Connecting Rod's Broken
The Analysis of Two-Phase Flow Type in the Micro-Channel Flow Boiling
The Application of Tool Nose Radius Compensation in the Numerical Control Turning
The Basic Principle of Centering of Shafting
The Crash-Box Crashworthiness Design Based on RCAR Tests
The Design and Implementation of Fuzzy Control Algorithm for Frequency Conversion System of Pump
The Design of Electronic Control Governor of Turbo-Charged Diesel Engine
The Design of the New-Type Vice Wrench for Machine
The Development of Multi-Angle Positioner
The Fracture Failure Analysis of Precision Centrifuge Spindle
The Influence of Performance of W-Type Metallic Sealing Ring with Different Outer Arms Open Angle
The Modeling and Simulation of Pneumatic ABS Pressure Regulator Based on AMESim
The Multi-Body Dynamics Analysis and Experiment of Long Distance Steel Belt Transmission
The Process of Multi-Line Triangular Thread by Axial Line Method in Numerical Control Lathe
The Simulation Analysis of the High Speed Switch Valve Control the Cartridge Valve Based on AMEsim
The Standard Wiring Practices in the Role of Boeing Aircraft Maintenance
The Structure Analysis of the Amphibious Robot's Propeller Based on Fluid-Solid Coupling
The Vehicle Control Unit Selection of Microprocessor and Main Circuit Design
Theoretical Analysis of Flying Characteristics for Air-Helium Filled HDD
Transmission Error Calculation Based on Manufacturing Errors and Load
Turning-Milling Machining Center Headstock Assembly Design
Variety of Liquid Filling Machine PLC Hybrid Control System Design
Vibration Control of Space Truss Structure with Viscoelastic Laminated Composite Damper
Wearing Fault Diagnosis Application of Reciprocating Membrane Pump Based on KPCA
The Status Quo of Hemispherical Parts Stretch Forming with Research and Analysis
Analysis of Influence of Structures and Strength about Corrugated Radius of Metallic Sealing Ring
Application of Variable Frequency Speed Regulation System in Coal Mine Drainage
Design of Enclosure Assembly for Q450 Pellet Molding Machine Based on Solidworks
Finite Element Analysis of Leakage about Metallic Sealing Ring Used in Aircraft Engine
Influences of Welding Residual Stresses on Performance of Steel Structures and Methods for their Elimination
Overview of the Status of Research on the Behavior of Beam-Column End Plate Connection Joints of Steel Frame
Performance Analysis for Spindle System of Special Friction Welder Machine Based on ROMAX Software
Research and Application of Compound Lever Iron Plate Shears
Research Status of Seawater Desalination System
Self-Diagnosing and Warning System of Wind-Induced Damage for Large-Span Spatial Steel Structure
Simulation of Liquid Meniscus and Microdrop Formation of a Capillary Gripper for Microparts Transfer
Study on Multi-Functions Vacuum Cleaner without Causing Secondary Pollution
The Differences between Section Rigidity and Member Stiffness and their Applications in Engineering Structural Design
Development of New Multi-Function Power Quality On-Line Monitoring Device
Research on Latest Application of Precision and Special Processing Technology
Research on Unified Expression Method of Multi-Domain Constraint Models
The Electric Car Charger Control Circuit Design and Analysis Module
Determination of LED's Efficacy for Lighting Application
30A/60V Electric Car Charger Control Circuit Simulation
A Combined Particle Swarm Optimization-Wavelet Transform Based Strategy for Power Management of PEM Fuel Cell Powered Hybrid System
Analysis and Design of Integrated Optimization of 1.5MW Wind Turbine Tower
Analysis of Flow Measurement Accuracy by Coaxial Phase Water Detector
Analysis on Energy Dissipation Principle of Buckling Restrained Brace Frame
Analysis on Simulated Experiments of Arcing Earth Fault in Low Voltage Circuit
Analysis on Wheel-Rail Contact and Rail Cracks of 50m Radio Telescope
Application of Reactive Power Optimization in Power Grid in AVC
The Draw of Chinese Children 2D Body Template Based on Cero
Damping Characteristics Analysis Based on Complex Torque Coefficient Method in Sub-Synchronous Oscillations
Dynamic Analysis of Tunnel Blasting Excavation Effect on Overpass
Electric Power Dispatching Operation Danger Point Analysis and Control Research
Reconstruction Method of Reconfigurable Machine Tool Based on Task Polymorphism
Important Problem Analysis and Solution of Whole Bridge Type Switching Power Supply
Improved Model by Grouting Graded Gravel in Subgrade Surface Layer
Incorporation of MWCNTs to PMMA Bone Cements: Effects on Fatigue Properties
Global Existence and Blow-Up in Finite Time of Solutions to One Kind of Reaction-Diffusion Educations with Neumann Boundary Conditions
Isolation System Design and Noise Control of Roots Blower Room
Lightning Electromagnetic Field within the Building
A Case Study on the Optimization of Runway Reconstruction Project Scheduling Based on the Supervision Management Data
A Design of Coal Mine Security Monitoring Substation Based on ZIGBEE and CAN Bus
A Design of Miniature Wideband Patch Antenna Based on Computer Simulation Technology
A Design of the Intelligent Fire Alarm System Based on CAN Bus
A Highly Reliable Online Monitoring and Real-Time Alarm System for the Insulation Condition of Power Transformers
A New Estimation Method of Transient Voltage Stability Limit Clearing Time
A New Flow Chamber for Evaluating Flow Conductivity of the Network-Like Fractures
A New Portable Harmonic Analyzer Based on MSP430
A Novel Automatic Green Design Based on Intelligent Algorithm
A System Design for Springback Compensation Base on PAM-STAMP2G FEM
An Optimization Approach of SRM Sphere Slot Grain Design Based on Improved Differential Evolution Algorithm
An Wireless Collection and Monitoring System Design Based on Arduino
Analysis on Motion State of Ship in Large Storm
Lubricating Online Detecting System of Large Unit Based on the Virtual Instrument
Calibrate the Turning of Micromouse
Computer Simulation for Thermal Analysis of an Electric Box
Convolution Approximating Perfect Matched Layer Absorbing Boundary Condition of 3D Scalar Acoustic Wave Equation
Non-Contact Power Supply LED Lighting System
Creation of Modern Instruments for Glassware Cleaning and Cleanliness Testing
Optimal Linear Control Driven for Piezoelectric Non-Linear Energy Harvesting on Non-Ideal Excitation Sourced
Power Electronic Technology Application in Power System Reactive Power Compensation Study
Research and Practice of Construction on Air-Ground Integration Land Dynamic Monitoring Platform
Research of Pulse Current Charge Method for all Vanadium Redox Battery
Research on Asphalt Concrete Pavement Edge Molding Machine with Intelligent and Automatic
Research on Saturation Switched Control of Three-Phase Active Power Filter Based on State Feedback Model the Content
Design and Analysis of CAN Communication Network Applied in Hybrid Electric Vehicle
Design and Application of Internal Flat-Pool Measuring Weir
Research on the Total Station Trigonometric Leveling Using Midway Method Replaces Three/Four Grade Leveling
Simulation on Probe-Fed Rectangular Patch Antenna with the Minkowski Fractal Structure
SoC Evaluation of Power Battery Remaining Capacity Based on Battery Model and Extended Kalman Filter
Study on the Static Load Test of Bridge Inspection
Study on the Thermal Stress Couple Field of Nuclear Power Pump Mechanical Seal Based on ADINA
Design and Simulation of Dot Distribution of the Non-Uniform LED LGP
Design Car Fault Diagnosis System
Design of PLC Control System in Automatic Production Line for Casing Fin Tube
The Effect of Chip's Size on the Performence of GaN-Based LED Chips
Design of Remote Intelligent Meter Reading System
Design of Supervisory Control System for Welding Robot Product Line
The Research of EPON Rapid Protection Switching in Power System
The Research of Output Voltage Error of Matrix Converter Decreased under Low Switch Frequency
Ergonomics Design in Multifunctional Reading Type Bed Model
Dynamic Route Planning Algorithm with Impact Time Control
Research and Design of a 100W Adapter Applicable to Laptop
Effects of Slider Geometry Change on Helium Filled HDD
Experimental Study for Improving the Measurement Accuracy of Optical Fiber Sensor
Fault-Tolerant Controller Design for Uncertain Networked Control Systems Based on Static Output Feedback
Insulin Dosage Optimization Based on Model Predictive Control with the Model Parameters Estimation
Intelligent Machine Body Repeater Communication Model
Intelligent Vision Tester Based on Embedded System
Modeling and Stability of Networked Cascade Control Systems
Modified Multiobjective Dynamic Multi-Swarm Particle Swarm Optimization for Mineral Grinding Process
Motion Control Software for Micromouse Based on LM629
Movable Angle Cursor Positioning Ruler of Development
Multi-Agent Behavioral Control System for the Ore Grinding Process
Multi-Body Dynamics Analysis of Anti-Backlash Gear System Based on ADAMS/ Flex
Network Time-Delay Compensation Based on Narandra Stable Adaptive Control
Optimal Design of LQR Controller Based on Improved Artificial Bee Colony Optimization Algorithm
Overview of Control System of Neutral Beam Injection on EAST
Position Control of a 3-RRR Planar Parallel Manipulator with Non-Planar Links Using External Encoders
Power Distribution Network Planning Based on Group Search Optimizer Algorithm
Prediction Method of Grinding Chatter Based on ARIMA
Quantitative Analysis of Fault of Wind Turbines Based on Hilbert Space Feature Entropy
Research of Multi-Input Predictive Fault Diagnosis Control System on Combine Harvester
Regression Analysis of Pedestrian Fatality Risk and Impact Speed
Remote Control Switch Socket for Intelligent Home Based on Wifi and PLC
Research and Design of the Material Management System Based on Digital Pipeline
Research of Acoustic Emission Monitoring Wireless Sensor Network System Based on DSP
Research of Kansei Image Based on Product Appearance Form Deconstruction
Research on Application of Blind Source Separation in Rolling Bearing Fault Diagnosis Based on Particle Swarm Optimization
Research on Control Strategy of Underground Drainage System
Simulation of PMSM Servo Stiffness Using Control System Parameters
Stability of Discrete-Time Network Control Systems with Time-Varying Delays
Studies on Ships Collision Avoidance with SAPSO Arithmetic
Study on Resolver in Servo System
Study on the Dynamic Weighing Measurement Accuracy of the No Parking Weight Charging System
Sub-Synchronous Oscillation Caused by HVDC and the Damping Characteristic Analysis
Technology of Mobile Phone 3D Model Reconstruction Based on the Geomagic Studio
Temporary Grounding Lines Detection Method for Distribution Network and its EMTDC Simulation
TFT-LCD Spot-Type Defect Detection in Module Process
The Algorithm Research of Complex Multi-Domain Constraint Models
The Bearing Vibration Signal Collecting System Based on STM32F103C8T6
The Design of the Intelligent PDU Remote Control
The Development of a Potentiometer Electric Parameter Comprehensive Test Instrument
The Study of the Lock Hopper Control System
Whole Trajectory Design Optimization of Self-Propelled Artillery Based on Adaptive Genetic Algorithm
Wire Rope Fault Diagnosis Based on Wavelet Analysis and Support Vector Machine (SVM)
Based on Pro/E Mouse Shell Injection Mold Design
Based on Pro/E' Parametric Design of Transportation Pallet
Based on Pro/E's CAD/CAM Integration of Ceramic Gear
Design and Implementation of Car's Virtual Exhibition and Individual Customization System Based on Virtools
Product Form Design for Mass Customization
Application of Business Management Computer Information Technology
Chapter 3: Communication, Information Technologies, Signal and Data Processing
The Research about Influential Factors of the New Network of Community Based on Behavior Psychological of Audience
Design and Implementation of Software for Distribution Service Restoration after Fault Based on Load Balancing
Distribution-Free Multivariate Control Chart Based on Change-Point Model
Computer Network Security Threats and Security Technology Research
Data Mining and Visualization System Design and Development
A Approach to Change Detection for HR Image
A Design of Real-Time Image Processing Platform Based on TMS320C6678
A Distributed Association Rules Mining Algorithm
A Fault Location Method in Distribution Network Based on Firefly Algorithm
A Hybrid Particle Swarm Optimization for Solving Vehicle Routing Problem with Stochastic Demands
A Method for Objects Classification Based on InSAR Data
A New Feature Detection Algorithm Based on RANSAC
A New Real-Time Process Monitor Method Based on MRC
A New Relational Database Watermarking Algorithm Based on Chaos
A New Simple Automatic Approach for Image Retrieval
A New Ultrasound Image Denoising Method Combining Nonsubsampled Contourlet Transform and Edge-Preserving Self-Snake Model
A Novel Algorithm for Image Data Segmentation
A Novel Calibration Used for Blind Steganalysis of JPEG Images
A Real Time Data Transferring Method for Electric System
A Study on Digital Archives Based on Cloud Computing
An Analysis of New Mining Algorithm for Spatial Outliers
An Artificial Neural Network Model for Data Prediction
An E-Business Model Based on XML and Web Services
An Edge Detection Method Based on Improved Sobel Operator
An Efficiency Algorithm for SDCP Program
An Immunity-Based Algorithm for Distribution Center Location
An Improved Evaluation Method of Routing Strategy
An Improved RSSI Positioning Algorithm Based on Reference Distances
Animation Type Analysis after Using Computer 3D Animation Technology
Application of EPON Multicast Technology over IPTV
AR Model Power Spectrum Estimation and MATLAB Simulation
Based on GIS Spatial Clustering Algorithm Research
Design and Implementation of CRM Based on J2EE
Design and Implementation of Equipment Management Software for EAST Neutral Beam Injector
Design and Implementation of Homework Correction Management Information System Based on J2EE
Design and Implementation of Serial RapidIO Based on DSP and FPGA
Design of Image Feature Information Recognizer Based on Regional Maximum Entropy
Development Direction of Machine Learning in the Era of Big Data
Development of Digital Image Processing System Based on MATLAB
Development of Near-Field Acoustical Holograph and its Review
Diagnosing Problems of Distribution-Free Multivariate Control Chart
Discussion on Development of Mineral Identification System Based on IDL
Doppler Frequency Offset for High Dynamic Signal with Low SNR
Experimental Study of Human Fingerprint Image Recognition Analysis
Fuzzy Clustering Apply to Quality Grading Standards of Radix Bupleuri Seeds
IETM Database Design Based on Native XML Database Technology
Improved Moving Target Detection Technology
Intelligent Data Prediction Based on Fuzzy Reasoning
Linearization of Coupled Pointing and Tracking Dynamical Equations
Local Internet Construction of Information System
Mesh Structure VLSI of 9/7 Lifting Wavelet Parallel Transform
Movement Identification Based on Transient sEMG for Control of Prosthesis
Multi-Task Coalition Generation of Multi-Agent System with Limited Resource
Network Security Protection Measures
Networked Learning Community Construction Based on Instant Messaging Software
On the Security of an Anonymous Multi-Receiver Encryption Protocol
On the Visual Bias in Computer 3D Animation Technology
One-Bit DAC Application Design in Audio Signal Processing
Performance Comparison of Wideband Radar Target Detection Methods
Personal Computer Network Security Prevention Research
Power Line Carrier Communication Meter Concentrator Hardware Design
Privacy-Preserving Mining of Association Rules for Smart Grid
Real-Time Infrared Image Non-Uniformity Correction Based on FPGA
Research and Application of Carbide Blade Surface Quality Primitive Digital Automatic Detection
Research and Implementation of Data Recovery Technology in Campus Computer Labs Based on Hidden Partition on Windows Systems
Research and Implementation of Face Detection Based on OpenCV
Research of Soft Switch Technology Based on H.248 and SIP Protocol
Research on Construction of Cloud-Based Learning Platform MOOC
Research on Content Analysis Algorithm of Focused Crawler Based on LBTF-IDF
Research on Radar Target Simulator
Research on Security Technology of Campus Network
Research on the Application of Software Defined Network in Electric Power Data Communication Network
Research on the Development of Archives Information Based on SWOT Analysis in Cloud Computing Era
Research on the Key Diagnosis Technology of PROFIBUS-DP Based on FPGA
Short Text Clustering Algorithms for Weibo Topic Detection
Simulation of Determining of Circular-Harmonic Filter Expansion Center and Order
Spline Interpolation Sub Pixel Edge Detection Method Based on Improved Morphological Gradient
Study for Catenary Fault Detection Based on MNP Method
Study on the Algorithm Based on Local Correlation for Noise Detection
Study on the Behavioral Logic of Personal Information Protection in the View of Constitution
Target Scale Adaptive Control Based on Comparing Bhattacharyya Coefficient
The Application of User Macro-Program in the Modularization Programming
The Design and Implementation of the Production Report System Based on Silverlight and Stimusoft Reports
The Design of Adaptive Noise Cancellation Filter Based on DSP Chip
The Design of Wireless Data Collector Based on WIA-PA
The Impact of Applying Cloud Computing to Archives Informatization
The Influence of Cloud Computing on Digital Publishing
The Mobile Agent Migration Algorithm Based on QoS
The Multi-Slice Method of Program Slicing for Fault Location
The Quick Method for Image Registration Combined with Information Entropy and Cross-Correlation Matrix
The RBF Neural Network Based on Kalman Filter Algorithm and Dual Radial Transfer Function
The Realization of the Data Mining Technology and its Application
The Research of the Computer Network Fault Solution
The Simulation Research of Two State Markov Chain in the Double Random SVPWM of the Variable Frequency Control System
The Study on Fire Spreading Based on Mobile Agent and Grid Technology
Two-Dimensional Parameter Principal Component Analysis for Face Recognition
Underdetermined Blind Sources Separation Based on Nonnegative Tri-Matrix Factorization
Video Block Motion Estimation Based on Walsh-Hadamard Projection Kernels
Vocational Colleges Wireless Network Design
WCDMA Wireless Resource Utilization Analysis Based on Ultimate Bearing Capacity
Web Application Development Based on MDA Project-Driven Mode
Web-Based Monitoring for Frequency Converters with USS Interface
Based on DNS of a Layered Web Search Engine Study
Application of Nonnegative Tucker Decomposition in Medical Data Analysis
Computer-Generated Hologram Compression Research Based on BP Neural Network in Wavelet Domain
Auxiliary Device for SCM and its Design Project
Design and Implementation of Landscape Plant Information Search Engine
Fingerprint Preprocessing and Recognition System Development and Design
Manufacturing Information Based on Cloud Service Platform
Support Engineering Computer-Aided Design Systems and BIM Template
A Novel Parallel Vertex Processing Framework of Progressive Mesh
Design and Implementation of Tourism Management Information System
Design for Distributed Database Server of Tea Traceability System Based on Amoeba
E-Commerce Information Management System Data Security Research
Gesture Recognition Research Based on Kinect
Hadoop Cloud Computing Application in Database Marketing System of a Tobacco Company
MMA for Topology Optimization Based on the Theories of Density Interpolation Schemes
Multiobjective Topology Extraction of the Compliant Mechanisms
Regression and Classification Method Based on Gaussian Processes
Research and Design on Sports Meeting Management System Based on Information Technology
The Development of Database of Rubber Bladder Forming Process Parameters Based on Visual Basic
Student Achievement Management System Development and Design
A New Geography and Energy Cluster Algorithm for Routing Protocol in Wireless Sensor Network
Study and Exploration into Query by Humming
A Study of Construction and Function of Digitalized Platform of Museum
An Aggregation Algorithm to Balance Energy Consumption and Reduce Delay Based on Unequal Clustering
TD-LTE Market Research and Analysis of Prospects
The Building and Maintenance of the Database under the Network Economy
The Personal Information of Label Algorithm in Space Management System Research
The Research and Implementation of Safety Isolation System SNMP Agent
Development of Intelligent System of Energy-Saving Diagnosis and Energy Audit Based on Dedicated Users
Environmental Perception Internet of Things Intelligent, Network Technology Research and Application
IGRS and UPnP Devices Interconnected Security Mechanism
An Automatic Transformation Technical Solution for Behavior Control Scripting Languages
Periodicals' New Publishing and Operation Mode in Digital Environment
Chapter 4: Building, Civil and Environmental Engineering
Dissolved Air Theory in Water Process Research Overview
A Study on Application of Low-Rise Steel Structure Housing in Small Towns of Northern Shan'Xi Region
Air Flotation Method in the Treatment of Oily Wastewater Application of its Progress
Analysis of BIM Application Capability Maturity Model in Construction Project
Analysis on Setting Joints Technology in the Concrete Structure Buildings
Application of Solar Photovoltaic Power Supply System in Cleaning Room Project
Basic Principle of Acoustics and Architectural Suggestions for the Auditorium in Theater
China Green GDP Analysis and Construction of the System of Ecosystem Services
Common Research Questions of Municipal Sewer Construction
Computer Simulation Technology in Architectural Design Applications
Connection Force Determination between Crop Roots and Soil
Design of Green Cabling System
Experimental Research on Schoolyard Domestic Sewage by MBR
Experimental Study of Dynamic Resilient Modulus of Cohesive Soils in Henan
Introduction to Economic Practicability High-Rise Building Water Supply and Drainage Design
Investigation into Recognition and Evaluation of Outside-Class Spaces among Teaching Buildings in Universities
Mathematical Modeling is Occupied Lane Road Access to the City 's Ability to Influence when the Accident
Measurement Technology in the Application of the Housing Construction
Optimization of Fracture Spacing in Western Sichuan Tight Gas Based on Fracture Interference
Research on Applied Technology in the Construction Management and Control of Building Engineering
Research on Public Rental Housing Facilities Management in Changsha
Research on Rural Pollution Treatment Technology
Research on the Formulas for Stabilizers of the Dian Lake Peat Soil
Seismic Effect Analysis on Buckling Restrained Brace
Seismic Strengthening Methods and Analysis of Instability of Gravity Retaining Walls
SI Residential Construction Techniques to Explore under the System
Some Opinions on Environmental Geotechnology
Study on the Control Strategy of Hydraulic Energy Saving Technology of the Power Synthesis Device
The Design Method of Railway Land Based on ObjectARX
The Dynamic of Qinghai Lake Area for Remote Sensing Monitoring and the Analysis of its Driving Force
The Relation between Moisture Content and Share Strength of Swelling Soft Rock in the North of Xianfeng Town Open-Cast Coal
The Stress Triggering of Aftershocks by Badong M5.1 Mainshock from Coulomb Stress Changes
The Vibration Influence on the Surrounding Ground by Four-Holes Parallel Tunnel
Application the Grey Neural Network to Evaluate the Water Quality of the Yangtze Estuary Wetland
The Common Research Theory of the Useful Life of North Pole Buoys
New Basket-Based Method for Testing Coarse Aggregate Saturated Surface-Dry Mass
Physical Environment Assessment Tools for the Performance of Recreational Farm
Planning of Slow Traffic System Combining Greenway from Bottom-Up Perspective: A Case Study of Ersha Island (Guangzhou)
Recovery and Utilization of Waste Plastic Mulching Film in China Rural Areas - Tanking Awat County, Xinjiang as Example
Research on the Mined-Out Area Green Reclamation Technology of Large Open-Air Phosphate Rock Mountain
The Development Potential and Countermeasures of China's Urbanization Based on Energy Security
The Seawater Quality Evaluating of the Yangtze Estuary Wetland Based on Wavelet Neural Networks
Analysis of a Predator-Prey Model with Sparssing Effect
Analysis on Lightning Striking Selectivity and Lightning Protection
Application of GRNN Neural Network in Short Term Load Forecasting
Food Packaging Designs and Researches Based on Green Concept
On Green Packaging Design in Packaging Design
The Stochastic Simulation Prediction Method for Landslide
Chapter 5: Management Engineering, Economics, Business, Logistics Engineering
The Research about Acceptance of Mass Customization Product Based on Technology Acceptance Model
The Research about Media Industry Boundary Based on System Economics
Traditional Journals' Way out in Clouding Publishing and Digital Reading Era
Abstractive Thai Opinion Summarization
Analysis of Consumption of Rural Residents in Jilin Province Based on Hidden Markov Model
Analysis on Risks of China's Urbanization
Analysis on the Consumer Decision Time of Online Shopping
BOQ Bidding Problems Exist in China and Solutions
China's Internet Real Economy Economic Management Network Based on Information Resources
Construction of Green GDP Accounting System
Cultivation Model of Human Resource Management Based on Internet
Data Analysis and Prediction on Chinese Industrial Economy and Human Resource Training
Data Analysis and Study on Relationship between Adjustment of Hierarchical Structure of Higher Education and Economic Growth
Design and Realization of Defense Equipment Scientific Research Project Management System Based on Earned Value Management
Design of a Freeway Mathematical Model and its Performance Analysis
E-Commerce Application Analysis of Flowers in China
Evaluation the Quality of Air Passenger Services
Game Analysis of Bidder Conspiracy Risk in the Large-Scale Government Construction Project
Game Analysis on Profit Distribution between Freight League
Information Technology Improve the Administrative Efficiency Research
Inventory Control of Supply Chain Environment
Path of the Operation and Promotion of Market-Based Chinese Martial Arts
Project Cost Management and Application of Information Technology to Improve
Queuing Model of Container Terminal Logistics System in Event Scheduling
Research and Analysis Ship Sailing Environmental Assessment
Research on Enterprise Management Model Based on Internet E-ERP
Research on Impact of Medical People Based on Cloud SECI Accounting Theory
Research on Mechanism between Government and Enterprise under BT Turnkey Model: A Cooperative Game Model
Research on Mechanism of Compensation for Participants Cooperation in IPD
Research on Smart Urban Metro Transport Enterprise Asset Management System
Research on the Inventory Control of Thermo-Technical Spare Parts in the Electric Power Group Based on E-Marketplaces
Research on the Psychological Capital and Job Burn-Out of Mechanical Engineers in Chinese Enterprises
Research on the Sort and Evaluation of National Defense Intellectual Property Rights
Research Training Model Employment of Migrant Workers
Sanda Market Operation and Industrialization Development Strategy Research
Strategic Analysis of Micro-Blog Marketing for Chinese Small and Medium Sized Enterprises
Study on the Development Strategy of China's Small and Medium-Sized Construction Enterprises
Summarize on Evaluation of Advertising Effect
The Analysis of Business Operation Pattern of E-Commerce Cash Flow
The Policy Effectiveness Evaluation on Financial Investment of Scientific and Technological Innovation of Liaoning Province
The Second-Degree Price Discrimination of m Firms with n Demand Intervals Pricing Based on Cournot Model
Timed Influence Nets Based Evaluation of the Effectiveness of Public Health Emergency Scenario
Two-Echelon Inventory Stochastic Model of Supply Chain Based on Service Level Constraints
Using Enterprise Architecture to Direct IT Governance
Analysis on the Problems and Measures to the Construction Project Cost Management
An Empirical Research of the Debt Source Structure and Operating Performance of the Small and Medium-Sized Enterprises of Chemical Industry in China
BBS of Mechanical Amateur Management System Development
Vehicle Driving Oil-Saving Technologies Discussed in this Paper
Comparing the Typical Technological Development Model of the World Nuclear Power
Dynamic Cost Analysis Design and Development Based on Digital Pipeline
A Double-Filtration Method of Recommendation for Automobile After-Sales Service
Build a Network-Based System of Accounting Information System Reform
The Building of State-Owned Capital Dual Budget System
Earned Value Analysis Application in Project Management
Evaluation of Airlines Operating Quality Besed on Grey Multi-Level
Chapter 6: New Technologies in Education and Sports
A New Ecology of Tertiary Education in China from the Perspective of Multimedia Technology
A Study on Training of Contemporary College Student Everyday Sports Ability
Analysis of " Electronic Ceramics" Bilingual Course Construction and Teaching Practice
Analysis of Graduate Education Quality Evaluation Data on Shenyang Aerospace University
Research on Multimedia Platform in Traditional Foreign Language Study in Practical Talents
Research on Design & Development for Multimedia Curriculum Resources in Foreign Language and Literature
The Exploration in Classroom Teaching Methods on "Pharmacy Administration"
Characteristics and Measures for Safe and Stable Work of College Students in the New Period
College Graduates Employment Management Information System Development
College Sports Venues Management Strategy Research
Construction of Innovative Platform Improving Students' Comprehensive Quality and Innovative Ability in Practice
Creating New Development through Technology Service Platform Provided by Higher Vocational Colleges
Cultivation of Innovation Ability of Applied Undergraduates Basing on Own Resources
Design and Application of "Data Structure" Online Teaching Platform
Design and Development of English Education System Based on Internet
Design and Implementation of SMS-Based Business English Education System
Design and Implementation of Translation-Based Universal English Internet System
Design on Systems Analysis Based on Multimedia Control in Traditional Sport Dance Teaching
Discussion on the Teaching of Multimedia Technology in Higher Vocational Colleges
Education and Teaching Methods of Full-Time Engineering Professional Master
Innovation Teaching Design on the C Programming of Ability Guidance
Network Architecture and Functional Development of the Foreign Linguistics Teaching Platform
Network Ideological and Political Education of College and Research Analysis
Practice and Explosion of Pupils' Writing Estimation Based on Tablets
Research on Application Multimedia Technologies in Basketball Basic Tactic Teaching
Research on Independent Learning Model Foreign Language on Multimedia Network
Research on New Equal and Interactive Relationship between Teachers and Students under the Network Environment in China
Research on Outward-Bound to Improve College Students' Social Adaptation Ability with AQ as the Mediating Effect
Research on Talents Training Pattern of Digital Media Arts Major Based on College-Enterprise Cooperation
Research on the Multimedia Teaching in Chinese Universities
Research on the Preference Evaluation Factors of Schoolroom via Psychophysical Tests
Students Work in Scientific Outlook on Development Guidance
Study and Analysis of College Student Extracurricular Sports Activity
Study of Benign Interaction between Teaching and Scientific Research in the Teaching-Oriented Local University
Study on Application for Multimedia Curriculum Resources in Chinese Language and Literature
Study on Reasonable Construction of Undergraduate Program Teaching Model for Mathematics Education
The Application Research of SMS in Higher Education
The Comparison to Education Conception between American Private Universities and Chinese Private Higher Education
The Constructing of Educational Technology Competency Framework for Teachers in Vocational Colleges
The Design and Implementation of Educational Administration System
The Established of Language Training Service Standard System Based on System Engineering
The Impact of Foreign Language Learning Style on Strategies Preferences in Art Colleges
The Popularization of Marxism Education Based on Internet Platform
The Study and Practice of Constructing Featured Specialty Based on the Double Qualified Teacher and Double Mentors
The Study on Media Selection Strategies in Short of Education
The Application of Simulation Software in CNC Multi-Axis Machining Teaching
Research on Internet Culture Model Based on Memetics Literacy Translation Construction
Try to Talk about the Customers' Needs of Graduate Education Management System
Using Grey Relational Analysis to Analyze Mathematics Ability of Daily Life of University Students
Reflections on Technician Cultivation of CNC Multi-Axis Machining in Vocational Colleges
Striving for Offensive Rebounds in the Basketball Game: A Theoretical Study
The Analysis of Cognitive Trait Anxiety for Speed Skater in China
Research on Application of Symbol Typesin Design and Semiotics
Metaphors in the Patterns of Sun, Moon, and Star of Southwest Ethnic Minorities
Kinematics Analysis on 720 Degrees Spin Kick Followed by Horse Stance of Fukui Li in Southern Fist
Analysis of Specific Cognitive Ability Characteristics of Man Curling Skip Athletes in Heilongjiang Province Team
Analysis of Specific Cognitive Ability Characteristics of Chinese Women Curling Athletes
The Kinematics Analysis of Carlos Moya and Thomas Enqvist Tennis First Serve
Based on Authorware Courseware Design
Cultivation Model of Translation Ability Based on Internet
Research on English Electronic Standard Database Based on Android Platform
「Nielsen BookData」 より
