Materials engineering and automatic control III : selected, peer reviewed papers from the 3rd International Conference on Materials Engineering and Automatic Control (ICMEAC 2014), May 17-18, 2014, Tianjin, China
著者
書誌事項
Materials engineering and automatic control III : selected, peer reviewed papers from the 3rd International Conference on Materials Engineering and Automatic Control (ICMEAC 2014), May 17-18, 2014, Tianjin, China
（Applied mechanics and materials, v. 575）
Trans Tech Publications, c2014
- : pbk
大学図書館所蔵 件 / 全1件
-
該当する所蔵館はありません
- すべての絞り込み条件を解除する
注記
Includes bibliographical references and indexes
内容説明・目次
内容説明
Collection of selected, peer reviewed papers from the 3rd International Conference on Materials Engineering and Automatic Control (ICMEAC 2014), May 17-18, 2014, Tianjin, China.
The 182 papers are grouped as follows:
Chapter 1: Advanced Materials Engineering and Materials Processing Technologies,
Chapter 2: Mechanical Engineering and Dynamics, Liquids and Gases Mechanics, Applied Mechanics in Technological Processes, Structural Design,
Chapter 3: Instrumentation, Measurement and Testing Technologies, Analysis and Calculations Methodology,
Chapter 4: Technologies of Power Systems, Energy and Thermal Engineering, Its Applications,
Chapter 5: Mechatronics and Robotics,
Chapter 6: Control Technologies, Automation and Simulation of Manufacturing,
Chapter 7: Data Mining, Detection, Monitoring and Fault Diagnosis Technologies,
Chapter 8: Networks and Information Technologies, Systems Design,
Chapter 9: Product Design, Planning, Projects Management and Industrial Engineering
目次
Preface, Committees and Sponsors
Chapter 1: Advanced Materials Engineering and Materials Processing Technologies
Modeling of TiN Coating Thickness Using ANFIS
Effect of Secondary Cooling Configuration on Microstructure of Cast in Semi-Continuous Casting of Copper and Brass
Optimization of Products Yields from the Pyrolysis of Palm Kernel Shells Using Response Surface Methodology
Study on the Effect of Wear Resistant Materials Applications in Reducing Wear Damage of Gas Turbine Combustor Components
Type of Failure of Zirconia-Based Ceramics in Dental Laboratory in Misurata, Libya
Surface Morphology and Mechanical Properties of Chitosan Film Incorporated with Marine Macroalgae by Casting Method
Effect of Thermodynamic Properties on Porosity of Ceramic Membrane Prepared by Phase Inversion
Green Synthesis of Silver Nanoparticles Using Elaeis guineensis (Palm Leaves): An Investigation on the Effect of Reaction Time in Reduction Mechanism and Particle Size
Energy Balance in Al-Co Open-Celled Foam of Transpiration Cooling
Effect of Fiber Treatment on Stress-Strain Behavior of Kenaf Fibers Reinforced Thermoplastic Polyurethane Composites
Potential of Integrated Membrane Bioreactor in Batik Dye Degradation - A Review
Effect of Calcination Temperature on Synthesis of N-Fe-TiO2 for Photocatalytic Degradation of Methylene Blue under Visible Light
Dye Decolourization of the Remazol Dye in Textile Effluent by Using Bambusa heterostachya
The Potential Use of Tacca leontopetaloides as Green Material in Manufacturing Automotive Part
Numerical Simulation on Moulded Thin-Walled Parts via Injection Moulding Process
Feedstock Characterization of Elemental Nickel and Titanium Powders Mixture for Metal Injection Moulding Process
Materials Development and Hardness Properties of Aluminum Alloy
The Effect of Zr Content in the U-ZrHx Alloy Powder on Density, Heat Capacity, and Morphology
Effect of Co Doping on the Properties of Ce0.75Zr0.25O2 Nanocatalyst
Overview: Modification of Cerium Oxide in Three-Way Catalysts
Specific Heat and Volumetric Heat Capacity of Granular Materials as Affected by Moisture and Density
Wavelet-Based FDTD and High Resolution Spectral Estimation for Calculation of Band Structures in Two-Dimensional Phononic Crystals
The Accurate Prediction Method of Tension Modulus for Nylon Cord/Rubber Composite Material
Study on the Grinding Process of Ceramic Zirconia Oxide Rod
Rheological Study of Nanosilica Based Drilling Fluid
Effect of Chemical Vapor Deposition Process Parameters on Graded SiC-SiO2 Coating
The Theoretical Study of TM Transmittance and Contrast Ratio for Sub-Wavelength Metallic Gratings
Effect of Auxiliaries on Pore Structure of Foam Glass
Chemical and Thermal Characterization of Dilute Sulfuric Acid Hydrolysis of Coconut Dregs
Microwave-Alkali Activation on the Morphology and Structure of Bamboo Activated Carbon
Effect of Powder Particle Size of Tin Based Alloy Sintered via Hybrid Microwave and Conventional Furnace
Effect of Hydrochloric Acid (HCl) Treatment on FTIR Profile of Agarwood Waste from Hydrodistillation Process
Corrosion Resistance by Sodium Metavanadate for AZ91D Magnesium Alloy
Synthesis and Characterization of CuO/SnO2 Nanocomposites
Effect of Ultrasonic and Sonothermal Treatment on Weight Reduction and Particles Size Distribution of Raw Palm Oil Mill Effluent (POME)
Evaluation of Buckling Performance of Fibre Metal Rectangular Plates: Experimental and Numerical Investigation
Removed at authors request.
Study on Resistivity Changes of Local Material Silicon Wafer Doped with Neutron Transmutation Doping (NTD) Using Multi Purpose Nuclear Reactor (MPR-30)
Automated Metamaterial Design with Computer Model Emulation and Bayesian Optimization
Comparative Inhibition Effect of Synthesized Fatty Amides Mixture, Pyridine and Pyrrole on Carbon Steel in Saline Environment
Study on the Impact of Welding on the Corrosion Properties of AA 6061 T6
Development of Maskless-Curing Slurry Stereolithography for Fabricating High Strength Ceramic Parts
Surface Properties and Cell Response of Bioactive Thermally Grown TiO2 Nanofibers
Effects of Fibre Loading and Interfacial Modification on Physical Properties of Rice Husk/PE Composites
Thermal Stability of an Axial-Compressed Open-Tip Carbon Nanocone
Effects of Ca Addition on Chemical Composition, Microstructure and Dielectric Properties of BaTiO3
Research on the Microstructure and Performance of Asphalt after the Salt Freezing Cycle
The Application of Anti-Corrosion Materials in the Oil and Gas Field Development
Linear and Angular Displacement Relationship of Natural Rubber Engine Isolator
Optimization in Synthesis of ITO Thin Films Fabricated by DC Magnetron Sputtering Method
Characteristics of Electrophoretic Deposition-Assisted Polishing Using Bamboo Charcoal
Chapter 2: Mechanical Engineering and Dynamics, Liquids and Gases Mechanics, Applied Mechanics in Technological Processes, Structural Design
Optimum Shape and Dies Design for New Thin Metal Gasket by Using Simulation Experiment
Thickness Increasing Characteristics of Steel Pipe during Die Forming
Estimating Correlation of Effective Thermal Conductivity on the Spherical Packed Bed Porous Media
Parameters Design of Shaving Cutter with Novel Relief Portion
Diamond like Carbon (DLC) Thin Films: Preparation and Characterization
Application of Finite Element to Spur Gear Stress Reduction Using Stress Relieving Feature
Parametric Study of Drag Force on a Formula Student Electric Race Car Using CFD
Comparative Study of Motorcycle Helmets Impact Performance
Novel Design of Valve Stem to Eliminate Buckling
Effect of Annealing Temperature on Microstructures and Properties of Warmly Deformed SCRAM Steel
Thermal Characteristics of a Circular Finned Thermosyphon Using Different Working Fluids
Static Analysis of Variable Cross-Section Beam Carrying a Moving Heavy Load
The Design Research of Millimeter-Wave Homing Empty - Empty Ammunition Ballistics
Structural-Acoustic Topology Analysis Based on Evolutionary Structural Optimization
Experimental Evaluations of High/Ultra-High Speed Grinding of Tungsten Carbide
Influence of Gas Condensability on Labyrinth Seal's Sealability
Optimum Design Based on Damage Tolerance for Overall Beam Structure
Cascade Aerodynamic Loss Correlations Accounting for Turbine Disk Inclination
Mechanism of the Strip Surface Chatter Marks with 1220 Cold Rolling Mill
Study of Hygrothermal Environment Effect on Compressive Strength of Stiffened Composite Panel
Preliminary Design and Computational Analysis of a C-D Nozzle with By-Pass System
On the Kinematic and Meshing Efficiency Analysis of Planetary Gear Reducer with Two Ring Gears
Tensile, Hardness, and Torsion Behavior of Welded AA
Research on Hydrodynamic Performance of Three-Dimensional Airfoil with Tubercles on Leading-Edge
Effect of Geometric Parameters on Mass Transfer Characteristics for Pulsatile Flow in Wavy-Walled Tubes
Characterization of Interfacial Stresses of a Coating/Substrate System due to Underneath Periodic Eigenstrains
Performance of Transient Temperature in Hot Spot Ignition
On the Influence of the Speed-Feed Interaction on the Wear Rate and Life of Multiple Coated Carbide Inserts Considering Rough Turning Process
Optimization of Milling Process for Aluminum Alloy Frame Part Based on Milling Force Analysis
Study of Solidification Time and Solidus Velocity on Porosity Formation in High Strength Aluminum Alloy Castings
Characterization of Local Bolt (C= 0.071%) after Surface Hardened at a Temperature of 400 DegreesC for 7 Hours with RF Plasma Nitrocarburizing Apparatus
Tensile Testing of Hybrid Composite Joints
A Method of Earth Gravity Environment to Imitate LRV Steering on the Lunar Surface
Application of Bispectral Analysis in Vibration Fault Detection: A Review
Using CFD Technique to Investigate the Effect of Tire Roiling-Noise with Different Pattern Design
Analysis of Shape Memory Alloy Hybrid Composite Plates under Low Velocity Impact
Response Surface Approach for Sensitivity Study of Neck Forces in Restrained Child Occupant during Side-Impact Crash
Surface Morphology Study: Effect of Electrolyte pH on the Electrodeposited Sn-Ag-Cu (SAC) Solder Alloy
The Application of Nonlinear Dynamics in Hazard Prediction
An Ensemble Approach of Machine Learning in Evaluation of Mechanical Property of the Rapid Prototyping Fabricated Prototype
Finite Element Analysis of Vacant Tubular Members under Static Loading Considering the Tip Shapes of Load
Structure Based Grading of Kinematic Chains
Characteristics of Underexpanded Co-Flow Jets
Application of Uniform Design and Kriging Interpolation in Optimization of ITI Dental Implant with Dynamic Chewing Loads
Comparison of Thermal Fatigue Test Methods for Die Casting Process: A Finite Element Study
An Assessment of Carrying Capacity for Substructure of Offshore Modular Drilling Rig
Chapter 3: Instrumentation, Measurement and Testing Technologies, Analysis and Calculations Methodology
Detection and Compensation of Positioning Accuracy Based on the Laser Interferometer
Measurement Uncertainty Research on Current Operation Humidity Sensor
Feasibility Analysis of DC Digital Voltmeter Automatic Test Equipment
The Design and Implementation of Matlab Simulation in Optical Aberration
Research on the Vibration Characteristics of the Explosion Vessel Using Wigner-Ville Distribution
Investigation of Incoherent Gamma-Ray Scattering Potential for the Fluid Density Measurement
Study and Design of Checking and Testing Car for Whole Circuit
Research on Project Site Sampling Method of Quality Supervision Sampling Inspection for Corrugated Sheet Steel Beams for Guardrail
Research on Electronic Implementation, Circulation Process in PDM System
Analysis of the Concentration of Pollutants Based on Wavelet Analysis
Transport Parameters of Electrons in N2-O2 Streamer Discharge
Hardware Design of Nature Gas Engine ECU Based on Single Chip
Fabrication of 1-3 Cement-Based Piezoelectric Ultrasonic Sensors for NDE Applications
A New Kind of Texture Synthesis Method Based on Best Match
The Study on High Way Traffic Capacity Based on the Maximum-Flow Algorithm
Monotonic Convergence Analysis for 2-D Roesser Systems via a LMI Approach
Creation of Coherent Superposition State by Stimulated Raman Adiabatic Passage in Serial Multi- -Type System
Chapter 4: Technologies of Power Systems, Energy and Thermal Engineering, its Applications
Study and Analysis of Power System Stabiliser Performance Using Artificial Neural Network
Tidal Current Turbine and Related Development Problems for Indonesia
Gas-Liquid Mixer Design of Multiphase Flow Experimental Apparatus
Thermal Characterization of Lithium Polymer Battery Module for Electric Vehicle Application
Bio-Diesel from Almond Oil as an Alternative Fuel for Diesel Engines
Biofuels Produced from Hydrothermal Liquefaction of Rice Husk
Faults Location of Cascaded Inverter Based on Artificial Intelligence
A Small Concentrating Solar Power Tower System
Electricity Generation with Camphor as Fuel
A Way to Determine the Economic Operation Mode of Substation Transformer
SUPEL Scenario for PWR Spent Fuel Direct Recycling Scheme
Application of the Improved Grey Model in Power Load Forecasting
Phase Change Material as Pump in an Organic Rankine Cycle
The Design of Battery Management System Based on MC9S08DZ60 and the Monitor Backstage Based on VB6.0
Numerical Simulation of Heat Transfer for the Ethyl Benzene Dehydrogenation Catalyst in the Kiln
To Study Different Losses and Loss Co-Efficient on Solar Flat Plate Collector at 900 Yaw Angle
Electrical and Structural Properties of P-Type Monocrystalline Silicon Solar Cell with Phosphorus Screen-Printed N+ Emitter
Optimization Parameters and Synthesis of Fluorine Doped Tin Oxide for Dye-Sensitized Solar Cells
The Quantitative Forecast and Suppression on the Electromagnetic Radiation from Low Voltage Frequency Converter
The Effect of the Material of the Body of a Solar Still on its Performance
Chapter 5: Mechatronics and Robotics
Design of a Redundantly Actuated Asymmetric Linear DELTA Parallel Mechanism for Singularity-Free Mode Changes
Fabrication and Characterization of IPMC Actuator for Underwater Micro Robot Propulsor
Design and Failure Analysis of Track Tensioner Unit for Mobile Robot Using Solidworks
A Preliminary Study of the HPN Robot
Chapter 6: Control Technologies, Automation and Simulation of Manufacturing
Development of the Self-Propelled-Gun's Fire Extinguisher Bottle Test Equipment Based on Pump-Valve Combined Control Scheme
Exploitation and Verification of the Engine Controller Virtual Test System
Research on Inverse Control of Active Magnetic Bearing Based on Fuzzy Inverse Model
Combined CNF with LQR in Improving Ride and Handling for Ground Vehicle
Mechanical Design of Mini Automated Storage and Retrieval Warehouse System for Electronic Components
The Numerical Analysis of the Thermo-Siphon Self-Injection Refrigeration System
Wheel Synchronization Control in Steer-by-Wire Using Composite Nonlinear Feedback
Modeling and Optimization of Laser Polishing Process
Research of Automobile Driving Simulator Control System
Air Transport Flight Program Performance of Navigation Based on the Continuous Automatic Control and Monitoring
The Variable Steering Ratio for Vehicle Steer by Wire System Using Hyperbolic Tangent Method
Mathematical Modeling of Electromagnetic Levitation Based Active Suspension Using Bond Graph
Numerical Simulation of Hydraulic Jump Using the Improved Space-Time Conservation Element and Solution Element Method
Intelligent Detection System of Illegal Appliances' Malignant Load of Campus Electrical Grid
Remote Monitoring Technology and its Application to Control of Industrial Power Supply
Chapter 7: Data Mining, Detection, Monitoring and Fault Diagnosis Technologies
A Bank of Finite Memory Filters for Fault Detection and Adjusting Detection Latency
Effective ACPS-Based Rescheduling of Parallel Batch Processing Machines with MapReduce
Analysis on Bidirectional Reflectance Distribution Function of Rough Earth Surface in Remote Sensing Imaging
Introduction of Fingerprint Recognition Method for Machinery Faults Diagnosis
Machine Learning Tools in Machinery Faults Diagnosis: A Review
Experimental Study of Electric Bicycle Charging Fault Simulation
Chapter 8: Networks and Information Technologies, Systems Design
Process Sequencing Modeled as TSP with Precedence Constraints - A Genetic Algorithm Approach
Research on Data Modeling for Management System of Alignment Information
The Local Approximation Method for Structural Optimization
Research of Information System Engineering
Measurement and Analysis Topological Characteristics of Video-Sharing Network
RETRACTED: A Study on the Hardware Configuration Impact on Client-Server
RETRACTED: A Novel Application for the Emulation of Sensor Net-Works
Chapter 9: Product Design, Planning, Projects Management and Industrial Engineering
Design and Analysis of Lean Production Planning and Control System for NPF Company
An Immune Based Ontology Implementation of Hazard and Operability Analysis in Production Systems
Integrating AHP Application for Project Management
An Investigation for the Potential of Improving the Performance of Pattern Making Process in Steel Foundries: Case Study
The Effectiveness of Value Stream Mapping (VSM) as an Improvement Tool for the Manufacturing Operation
Product Life Cycle: VAVE Impact in Manufacturing Cost Reduction
Problems in the International Standard Model Method and Empirical Study
A Hybrid Discrete Firefly Algorithm for Multi-Objective Flexible Job Shop Scheduling Problems with Maintenance Activity
Scheduling with Discretely Compressible Processing Times to Minimize Makespan
Three-Dimensional Reconstruction of Three Real Roots Included Periodontal Ligament and Implant Study
Equipment Aging, Aging Detection, and Aging Management: A Review
The Design of the Agricultural Equipment Integrated Device
Research and Implementation of Electric Power Market Analysis and Forecast System
Electrolytic Simulation Experiment of Multilateral Horizontal well
The Head Injury Mitigation of an Adult and Child Pedestrian in a Frontal Vehicle Impact Using Response Surface Methodology
「Nielsen BookData」 より