Dynamics of machines and mechanisms, industrial research : selected, peer reviewed papers from the 2014 International Mechanical Engineering Congress (IMEC 2014), June 13-15, 2014, Tamil Nadu, India

著者

• International Mechanical Engineering Congress
• Balasubramanian, K. R.
• Sivapirakasam, S. P.
• Anand, R.

書誌事項

Dynamics of machines and mechanisms, industrial research : selected, peer reviewed papers from the 2014 International Mechanical Engineering Congress (IMEC 2014), June 13-15, 2014, Tamil Nadu, India

edited by K.R. Balasubramanian, S.P. Sivapirakasam and R. Anand

（Applied mechanics and materials, v. 592-594）

Trans Tech Publications, c2014

• : [set]
• Part 1
• Part 2
• Part 3

注記

Includes bibliographical references and indexes

内容説明・目次

内容説明

Collection of selected, peer reviewed papers from the 2014 International Mechanical Engineering Congress (IMEC-2014), June 13-15, 2014, Tamil Nadu, India. Volume is indexed by Thomson Reuters CPCI-S (WoS). The 501 papers are grouped as follows: Chapter 1: Advanced Material and Manufacturing Processes, Chapter 2: Nanomaterials and Nanotechnology in Machinery, Chapter 3: Dynamics and Applied Mechanics, Chapter 4: Tribology, Chapter 5: Thermodynamics and Thermal Engineering, Fuel and Diesel, Chapter 6: Applied Fluids Mechanics in Design of Machines and Equipment, Chapter 7: Vibration and Control, Chapter 8: Drive Systems of Machines, Mechatronics, Robotics and Control, Chapter 9: Engineering Development on Sustainable Energy, Chapter 10: Labour Safety, Ergonomics, Reliability and Safety of Machines and Mechanisms, Chapter 11: Industrial Engineering

目次

Preface and Organizing Committee Chapter 1: Advanced Material and Manufacturing Processes A Finite Element Simulation Study on Effects of Variation in Machining and Geometrical Parameters in Turning A Fuzzy Logic Based Model to Predict Weld Width - A Case Study of Hard Facing Process Using MIG Welding on Dual Plate Check Valve A Study of Preparation and Characterization of Nano-Sized SiC Powder Using High Energy Ball Milling A Study on Edge Milling Operation of NEMA G11 GFRP Composites Based on Grey-Taguchi Method A Study on White Layer Thickness and Surface Crack Density in Rotary EDM of RENE80 Nickel Superalloy Aerostatic Spherical Bearing Manufacturing Methods and Criticalities - An Approach An Analysis on Bead Characteristics in Material Deposition by PTAW Process An Analysis on Temperature & Surface Roughness during End Milling of Ti-6Al-4V Alloy An Assessment on Friction Stir Welding of High Melting Temperature Materials An Experimental Investigation on Mechanical Properties and Microstructure of Friction Stir Welding of AA5052 An Investigation of the Effect of Surface Refining on the Hardness and the Wear Properties of Al-Si Alloy An Investigation on the Effect of Process Parameters on Microstructure, Hardness and Wear Properties of Surface Modified Cu-Sn Bronze Alloy Analysis of AISI 1035 Grade Joints Welded Frictionally with Varying Forging Pressure Analysis of Mechanical Properties in Zea Mays Straw Fiber Composites Analysis of Powder Metallurgy Process Parameters for Relative Density of Low Carbon Alloy Steel Using Design of Experiments Tool Application of Desirability Analysis for Optimizing the Micro Wire Electrical Discharge Machining ( WEDM) Parameters Calculations of Equilibrium and Non-Equilibrium Properties of Molecule-Cluster Mixtures of Oxygen Compaction Characteristics of Tungsten Carbide Based Self-Lubricant Cutting Tool Material Comparative Investigation on Mechanical Properties of Natural Fiber Reinforced Polyester Composites Comparison of Machining Responses Using Multiple Regression Analysis and Group Method Data Handling Technique of EN-19 Material in WEDM Comparison Study of As-Cast and T6 Condition of Microstructure, Bending Strength and Double Shear Strength of A356 Alloy by Gravity, Vacuum and Squeeze Casting Control of Stand-off-Distance in Abrasive Jet Machining - A Fuzzy Approach Densification and Consolidation of Al 5083 Alloy Powder by Equal Channel Angular Pressing Densification Behavior in Forming of Stir Casted Aluminium Boron Carbide Composite Perform during Cold Upsetting Design, Fabrication and Analysis of Advanced Polymer Based Kevlar-49 Composite Material Desirability Fuzzy Approach for Optimizing Multiple Performance Characteristics in Machining Metal Matrix Composites Determination of Delamination and Tensile Strength of Drilled Natural Fiber Reinforced Composites Determination of Melting Efficiency of Mild Steel in GTA Welding Process Developing Empirical Relationships to Predict Tensile Properties of Friction Welded AISI 52100 Grade Steel Rods Development of Al-TiC Metal Matrix Composite by In Situ Reaction Development of Guided Wave Ultrasonic Inspection Method for Thick Composite Structures Development of Shape Memory Alloy Polymer Composite and Influence of Material Parameters on Shape Memory Development of Tool Based Micromilling/Microdrilling Machine with Piezoactuated Workpiece Feeding System Dry Sliding Wear Behavior of Graphite Particulate Reinforced Al6061 Alloy Composite Materials Dry Sliding Wear Performance of A356 Alloy with Minor Additions of Magnesium Effect of Boron Carbide and Graphite on Machining Characteristics of Aluminium Boron Carbide Composite Effect of Carbon Fiber, Silica and Fly-Ash Particulate Addition on Tensile and Impact Behaviour of Polyester and Epoxy Resin Effect of Chills on the Microstructure and Mechanical Properties of Carbidic Austempered Ductile Iron Effect of Deep Cryogenic Treatment on Machinability of NiTi Shape Memory Alloys in Electro Discharge Machining Effect of Fiber Parameters on the Mechanical Properties of Banana-Glass Fiber Hybrid Composites Effect of Filler Materials on the Mechanical and Thermal Properties of Epoxy Resin Effect of Offset Distance on Cutting Forces and Heat Generation in Multi-Tool Turning Process Effect of Operational Parameters on AA2014 Friction Stir Weldments Using Plain Cylindrical Tool Effect of Process Parameters on Heat Affected Zone in Micro Machining of Borosilicate Glass Using -ECDM Process Effect of Process Parameters on Quality of Micro Holes Machined on Copper Plate Using Developed -EDM Setup Effect of Tool Rotational Speed on Microstructure and Microhardness of AA6082/TiC Surface Composites using Friction Stir Processing Effect of Upset Current in Magnetically Impelled Arc Butt (MIAB) Welding of Carbon Steel Tubes Effect of Weight Percentage on Mechanical Properties of Fused Silica Particulate Reinforced Nickel Alloy (M 35-1) Composite, with Influence of Chills Effect of Welding Parameters on Mechanical and Microstructural Properties of Dissimilar Aluminum Alloy Joints Produced by Friction Stir Welding Effect of Zinc Coating on Mechanical Behavior of Al 7075 Empirical Modelling and Optimization of Sliding Wear Behaviour of Copper-Graphite Composites Using RSM Enhancement of Porosity of the Ceramic Shell in Investment Casting Process Using Needle Coke and Camphor Evaluation of Flexural and Interlaminar Shear Strength of Laminated Hybrid Composites Evaluation of Optimal Parameters for Machining Aluminium Alloy Al6061 in Wire EDM Evaluation of Quality Diffusion Bonding in Similar Material (Cu/Cu) Using Ultrasonic 'C' Scan Testing Method Experimental Analysis of Hole Ovality in Drilling of Carbon-Carbon Composites Experimental Investigation on Formability of Cryorolled and Room Temperature Rolled AA 6061 Sheet Metal with 50% and 75% Thickness Reduction Experimental Investigation on Optimisation of Parameters of Thermo-Catalytic Cracking Process for H.D.P.E. & P.P. Mixed Plastic Waste with Synthesized Alumina-Silica Catalysts Experimental Investigation on the Impact of the Tool Material & Geometry in Joining of Al 63400 Alloy Using Friction Stir Welding Process Experimental Investigations on Cryogenic Cooling in Drilling of Aluminium Alloy Experimental Investigations on Wire EDM of Al7075-TiB2In Situ Metal Matrix Composite Experimental Studies of Mechanical and Microstructure Properties of Plasma Sprayed Thermal Barrier Coatings Experimental Study on Temperature Effect and Tool Wear on Edge Trimming of Carbon Fiber Reinforced Plastics Experimental Testing on Hybrid Composite Materials Fabrication and Comparison of Mechanical Properties of Jute and Glass Fibre Reinforced Composites Fabrication and Investigation on Properties of TiC Reinforced Al7075 Metal Matrix Composites Fatigue Performance in Abrasive Flow Machining Finite Element Analysis of Jute Fibre Made Hybrid Polymer Matrix Composite Finite Element Modeling of TIG Welding of Aisi 304l Stainless Steel and Experimental Validation Finite Element Simulation of A-TIG Welding of Duplex Stainless Steel 2205 Using SYSWELD Fire Properties of Elephant Grass Fiber and Glass Fiber Reinforced Polyester Composites Formation and Structural Characterization of Electroless Ni-B-P Ternary Alloy Coatings Gravitational Search Algorithm - Based Optimization of Process Parameters in Micro Turning Process Heat Transfer Modelling and Investigation of the Effect of Pulse Frequency and Current in Pulsed Current Gas Tungsten Arc Welding Influence of Built Orientation on Mechanical Properties in Fused Deposition Modeling Influence of Electrical Discharge Machining Parameters on Surface Roughness in Machining of Al 6061-TiB2/ZrB2In Situ Metal Matrix Composite Influence of Experimental Environment on the Enhancement of Ultra Fine Grain Structure with Optimum Ductility of Equal Channel Angular Pressed Copper Influence of Pulse-on-Time on the Performance of Wire Electrical Discharge Machining of Ti-6Al-4V Using Zinc Coated Brass Wire Influence of Silicon on Performance of Al/SiC Composites Investigation into Coal Cutting Operation by Using Conical Pick of Cast Iron with LH710 Coated Tip Investigation of Laser Dressed Super Abrasive Grinding Wheel by Using SEM & Raman Spectroscopy Investigation of Optimal Processing Condition for Abrasive Water Jet Machining for Stainless Steel AISI 304 Using Grey Relational Analysis Coupled with S/N Ratio Investigation of Tensile Property and Pore Closure Behavior and the Influence of Processing Route during Equal Channel Angular Pressing of Pure Aluminum Powder Compacts Investigation on Interlaminar Shear Stresses in Laminated Composite Plates under Thermal and Mechanical Loading Investigation on the Effect of Multi Wall Carbon Nano Tubes in Wire Electrical Discharge Machining of Hybrid Metal Matrix Composites Investigations on Machinability and Machining Characteristics of Hybrid Polymer Investigations on Machining of Monel 400 Alloys Using Electrochemical Machining with Sodium Nitrate as Electrolyte Lasers in Green Manufacturing Processes Magnetic Field Assisted Electrical Discharge Machining of AISI 4140 Metallurgical and Mechanical Characterization of Al 6082-B4C/Si3N4 Hybrid Composite Manufactured by Combined Ball Milling and Stir Casting Microstructural Investigations on ATIG and FBTIG Welding of AA 2219 T87 Aluminum Alloy Microstructure and Mechanical Characterization of Al-Tib2 In Situ Metal Matrix Composites Produced via Master Alloy Route Microstructure and Mechanical Properties of Friction Stir Welded Pure Copper Modeling and Analysis on Influence of Channel Angle and Processing Route in Equal Channel Angular Pressing Modeling and Parametric Investigation of WEDM for D-2 Tool Steel Using RSM and GA Modeling of Material Removal Mechanism in Micro Electric Discharge Milling of Ti-6Al-4V Modelling and Analysis of Electrical Discharge Alloying through Taguchi Technique Multi Criteria Optimization of Electrochemical Discharge Micro-Machining Process during Micro-Channel Generation on Glass Multi Response Optimization of Drilling Parameters during Drilling of Particle Board Using Grey Relational Analysis Multi-Objective Optimization in Wire-Cut Electric Discharge Machining of Al 6063/Al2O3 Metal Matrix Composite through Response Surface Methodology Multi-Objective Optimization of EDM Parameters Using Grey Relational Analysis for Titanium Alloy (Ti-6Al-4V) Multi-Objective Optimization of Surface Roughness and Tool Wear in Turning Inconel 718: A Desirability Analysis, Genetic Algorithm and Firefly Algorithm Multi-Objective Optimization on Electric Discharge Machining Using by Grey Relational Analysis Multiple Response Optimization with Grey Relational Analysis of Friction Stir Welding Parameters in Joining Dissimilar Aluminium Alloys by Taguchi Method Neural Network Based Buckling Strength Prediction of Laminated Composite Plate with Central Cutout Numerical Simulation of Pulsed Nd-YAG Laser Butt Welding of AISI 304L Stainless Steel Sheet and Experimental Validation Numerical Studies on Heat Transfer and Fluid Flow during Laser Welding of Thin Sheet Numerical Study of Laser Cutting of Titanium Alloy (TI-6Al-4V) Optimisation of Machining Parameters for High Feed End Milling on Inconel 718 Super Alloy Optimization of Cutting Parameters in Wirecut EDM of D2 Die Steel Using Gravitational Search Algorithm Optimization of Friction Welding Parameters for AA6061-T6/AA2024-T6 Joints Using Taguchi-Simulated Annealing (TSA) Algorithm Optimization of Machining Characteristics in EDM of Si3N4-TiN Composites by Taguchi Grey Relational Analysis Optimization of Machining Parameters for CNC Turning of Different Materials Optimization of Machining Parameters for Drilling Al-SiC MMC Using ANOVA and Grey Relational Analysis Optimization of Multiple Responses in Dry Turning Process Using Taguchi-Grey Relational Analysis Optimization of Parameters for Diameter Accuracy in Wire Electric Discharge Grinding for Micro Machining of Tungsten Rods Optimization of Process Parameters during Friction Stir Welding of Dissimilar Aluminium Alloys (AA 5083 & AA 6061) Using Taguchi L9 Orthogonal Array Optimization of Process Parameters for Detonation Gun Coating Process through Greyrelation Analysis Optimization of Surface Roughness and Flank Wear in Turning SCM440 Alloy Steel Using Taguchi Method Optimization of Surface Roughness of AlMg1SiCu in Turning Operation Using Genetic Algorithm Optimization of Tensile Strength during Ultrasonic Lap Welding of Dissimilar Metals Using Taguchi's Philosophy Optimization of WEDM Process Parameters of Hybrid Composites (A413 / B4C / Fly Ash) Using Grey Relational Analysis Optimization of Welding Process Parameters by Taguchi Method (Experimentation and Application) Optimizing Feed Force in Turning Process Using Taguchi's Parameter Design Approach Parametric Modeling of GTA Welding Process for Dissimilar Metals through Response Surface Methodology Parametric Optimization of Boron Carbide Powder Added Electrical Discharge Machining of Titanium Alloy Parametric Optimization of EDM Process of Aluminium Boron Carbide Composite Using Desirability Function Approach and Genetic Algorithm Prediction of Life of Die Block Using Artificial Neural Network Prediction of Mechanical Properties of Polymer Composites Reinforced with Feather Fibers of 'Emu' Bird Preparation and Characteriszation of Cu-Al-Be Shape Memory Alloys with Cr as Grain Refining Additive Preparation and Mechanical Characterization of Stir Cast Hybrid Al7075-Al2O3 -B4C Metal Matrix Composites Quantitative Analysis of Intermetallic Precipitates in High Mo Superaustenitic Stainless Steel Reducing Tool Wear in CNC End Milling Operation Using Progressive Feed Rate Relative Estimation of Various Fuel Properties of Simarouba Glauca and Mahua Fatty Acid Methyl Ester Having Different Blends with Conventional Diesel Selection of Materials Using Multi Criteria Decision Making Method by Considering Physical and Mechanical Properties of Jute/Al2O3 Composites Slurry Erosion Wear of Al6061-SiC Composites Developed by Hybrid Technique Small Punch Creep Testing Technique for Remnant Life Assessment Studies on Mechanical and Machinability Properties of B4Cp Reinforced 6061Aluminum MMC Produced via Melt Stirring Studies on Mechanical Properties and Microstructure of Al2O3 Reinforced AA5083 Matrix Composite Synthesis and Characterization of Al7075, Al7075-10 Vol. % Al2O3 Composite Prepared by High-Energy Ball Milling Synthesis and Characterization of Al7075/SiC Composite by Stir Casting Synthesis and Characterization of Ti-TiB Composites Processed through Vacuum Sintering The Effect of Intermetallic Phases on Ductile to Brittle Transition of Aluminium-Iron Alloy The Effect of Process Parameters on the Friction Stir Processed AS7U3G Aluminium Alloy The Influence of Process Variables on Machinability of Hardened Tool Steel during the Hard Turning under Eco-Friendly Cooling Environment Thermal Analysis of Ceramic Coated Aluminium Piston with Slots Three Dimensional Analysis of Combined Forward and Backward Extrusion-Forging Process Using DEFORM 3D Tool Condition Monitoring in Microturning of Aluminium Alloy Using Multiple Sensors Wavelet Transform Based Recognition of Machined Surfaces Using Computer Vision A Study on the Effective Die Design in Sheet Metal Forming to Improve the Productivity Chip Morphology Investigation among Dry, Wet and Gas Cooled Machining of Super Duplex Stainless Steel Effect of Annealing on Fracture Toughness Evaluation of Ba0.5Sr0.5Co0.8 Fe0.2O3 (BSCF) at Different Temperatures Corrosion Analysis of AZ61 Alloy with Different Level of Ca Addition and Aging Electrical and Magnetoelectric Properties of (Y)Li0.5Ni0.7Zn0.05Fe2O4 + (1-Y)Ba0.5Sr0.5TiO3 Magnetoelectric Composites Optimization of WEDM Process Parameters Investigation of Porosity Relationship in Additive Manufactured Novel Bone Scaffold Raman Spectroscopy Studies on DLC Films Synthesized by PECVD Method SiC/Aluminium Co-Continuous Composite Synthesized by Reactive Metal Penetration Analysis and Validation of Erosion Process by Sea Sand as an Abrasive Material by Using Regression Model and Neural Network in Abrasive Jet Machining Process for Alumina Design and Analysis of Slotted Horn for Ultrasonic Plastic Welding Discussion on Ranking the Sawability of Rocks Using a Combined Multiple Attribute Decision Making Method Transportation Performance of Highly Concentrated Coal-Water Slurries Prepared from Indian Coals Synthesis and Characterization of Hardwickia Binata Fiber with Epoxy Improving Surface Hardness of Mild Steel Plates by Addition of Silicon Carbide Using Gas Tungsten Arc as Heat Source Investigation of Machining Parameters in CNC Turning of EN3 Low Carbon Steel Using Genetic Algorithm and Response Surface Methodology Extraction of Process Parameters from a Sheet Metal Part Model Study of Electromagnetic Forming Process on Tubular Components Chapter 2: Nanomaterials and Nanotechnology in Machinery Buckling Analysis of Symmetric Cross-Ply Laminated Annular Plates with Carbon Nanotubes Copper Coated Carbon Nanotube Wick Wetted with Ultrahigh Temperature Ceramic Nanofluid and Silver Nanofluid in Heat Pipes with Enhanced Stability Effect of Amino Multi Walled Carbon Nanotubes Reinforcement on the Flexural Properties of Neat Epoxy Effect of Nano and Micro Graphite Particle on Tribological Performance of Aluminium Metal Matrix Composites Energy Efficient Hybrid Nanofluids for Tubular Cooling Applications Experimental Investigation of Static and Dynamic Characteristics of Multiwall Carbon Nanotubes Reinforced Polypropylene Heat Transfer Enhancement by Using Nanofluids in Heat Pipe - A Review Microstructure and Mechanical Behavior of Nanoparticles Reinforced Metal Matrix Composites - A Review Numerical Study on Effect of Volume Fraction of Nanoparticles on Rayleigh-Bernard Convection in Different Enclosures Optimize the Evaporating Heat Transfer Coefficient of Refrigeration System Using Nano Fluid Investigation on the Machinability Characteristics of MWCNTs Filled Epoxy/Glass Fabric Hybrid Nanocomposite Using Various Drill Bits Densification of Mechanically Alloyed Al5083-5wt% Y2O3 Nano Composite by Equal Channel Angular Pressing Effect of T6 Heat Treatment in Tribological Properties of A356 Aluminum Alloy Reinforced with Al2O3 Nanoparticles by Combination Effect of Stir and Squeeze Casting Method Chapter 3: Dynamics and Applied Mechanics A Laboratory Working Model on Steer by Wire System A Study on Effect of Shape Irregularities on Collapse Loads of Pipe Bends with Critical Circumferential Throughwall Crack under In-Plane Closing Bending An Analytical Approach to Reduce the Stress Concentration around a Circular Hole in a Functionally Graded Material Plate under Axial Load An Experimental Determination of Johnson Cook Material and Failure Model Constants for Armour Steel Analysis of Static Mechanical Behaviour of Metal Bellows Using Finite Element Modeling Analytical Study on Elastic Limit Speed of Non-Uniform Rotating Disks Considering Thermal Effect on Elasticity Modulus Assessment of a Complex Aerospace Design through Optical Techniques Blade Stresses and CFD Analysis of Axial Gas Turbine Comparison of Materials for Universal Tractor Connecting Rod Using Ansys Software Computational Analysis of Fighter Aircraft Wing under Mach Number 0.7 for Small Sweep Angles Controller Design for Convoluted Air Spring System Controlled Suspension Design Modification in Special Purpose Machine by Introducing Poka-Yoke Techniques Design, Modeling and Analysis of a Gear Pump for Dispensing Application Dynamic Deflection of a Cantilever Beam Carrying Moving Mass Effect of Punch Profile Radius on Springback in V-Bending of Tailor Welded Blanks Welded in Transverse Direction Effect of Shape Imperfections on Thin-Walled Pipe Bends under Out-Of-Plane Moment and Internal Pressure Effective Design Analysis of Fixture Development for Stitching a Sandwich Panels in an Aerospace Application Experimental Analysis of a 20 Degrees Twist Helical Savonius Rotor at Different Overlap Conditions Fabrication and Testing of FRP Open Coil Springs Failure Analysis of Diesel Engine Exhaust Valve by Using Ansys Software Improvement in Tensile Strength of FDM Built Parts by Parametric Control Improving the Convergence Rate of a Timoshenko Beam Element under Dynamic Conditions Influence of Applied Misalignment on the Balanced High Speed Flexible Coupling of Fighter Aircraft Investigation on Eddy Current Braking Systems - A Review Kinematic Analysis of Rectangular Path Generating Adjustable Four-Bar Linkage Load Distribution in a Rolling Element Bearing under Dynamic Radial Load Low Cycle Fatigue Analysis of after Treatment Device Induced due to Thermal Load by Using Finite Element Analysis Mechanical Behaviour and Energy Absorption Foam Filled Structures of Square Section under Compression Loading Minimization of Transient Temperature Fluctuations in High Speed Spindle Bearing Multiscale Analysis Approach to Find the Dynamic Characteristics of Graphene Sheet Numerical Analysis of Wells Turbine Numerical and Experimental Crashworthiness Determination of Aluminum Tube Sections Numerical Simulation of a Three Bladed Marine Propeller in Steady and Unsteady State Parametric Study of Satellite Reflectors Used for Space Craft Applications Pivot Steering Based Omnidirectional Mobile Platform Progressive Failure Analysis of Laminated Composite Plate by Using Higher Order Shear Deformation Theory Static Analysis of Automotive Steering Knuckle Stress Intensity at the Initiation of Instability by R Curve Structural Analysis and Mobility Test of Fourteen Links Kinematic Chain Using Graph Theory Structural Analysis of Rear Axle Casing of Tractor Structural Damage Detection by Fuzzy Logic Technique Study on Effect of Stirring Parameters on Tensile Properties of Coconut Shell Powder Reinforced Epoxy Matrix Composite Study on the Effect of Strain Rate and Temperature on Mechanicalproperties of Nitinol Surface Roughness Effect on the Performance of 3-lobe Symmetric Hole Entry Hybrid Journal Bearings Tensile Strength of Banana - Bamboo - Glass Fiber Reinforced Natural Fiber Composites Evaluation of Cyclic Hardening Parameters for Type 304LN Stainless Steel Representation of Damage with Fracture-Strain Stability and Drag Analysis of Wheeled Amphibious Vehicle Using CFD and Model Testing Techniques Support Analysis of Horizontal Pressure Vessel Using FEA Investigations on Dynamic Analysis of Propeller Shaft Three Dimensional FE Modeling of the Scratch Test for DLC Coated High Speed Steel Substrate An Investigation on the Development of Hard and Strong Bainitic Steels by very Short Heat Treatments Optimized Design of Friction Clutch for Maximum Torque Transmitting Capacity Using Uniform Pressure Theory Chapter 4: Tribology A Comparative Study on the Wear Behavior of Cast and Forge Aged A356 Alloy with Addition of Grain Refiner and/or Modifier Abrasive Wear Performance of CNT/PP Composites Adaptive Neural Network for Estimation of Sliding Wear Behaviour of Al6061-Carbon Fiber Composites Anti Friction Properties of Motor Oil Dispersed with WS2 and MoS2 Nanoparticles Comparative Study on the Wear Properties of Fly Ash and Silica Fume Filled Nylon Composites Dry Sliding Wear Behaviour of Basalt Short Fiber Reinforced Aluminium Metal Matrix Composites Dry Sliding Wear Behaviour of Titanium and Boron Carbide Nano Coated Grey Cast Iron Cylinder Liner Effect of Mg and Sr Additions on the Microstructure, Mechanical Properties and Reciprocating Wear Characteristics of Hypereutectic Al-14Si Alloy Effect of Process Parameters on Tribological Properties of Ni-P-Al2O3 Composite Coatings Effect of Sliding Speed on Tribological Properties of Microwave Sintered Copper-Graphite Composites Estimation of Tribological Behavior of Al2024-TiB2In Situ Composite Using GMDH and ANN Influence of Linear Grooved Texture on Improvement of Tribological Properties of Cutting Tool Material Mechanical and Tribological Behaviour of Epoxy Reinforced with Nano Al2O3 Particles Mechanical and Tribological Properties of the Composition "Steel - Nanostructured Surface Layer of a Material with Shape Memory Effect Based TiNiCu" Microstructural Analysis and Wear Behavior of Cryogenically Treated Ti-6Al-4V Alloy Modeling and Optimization of the Wear Performance of Aluminium Metal Matrix Composite Using Response Surface Methodology Optimization of Tribological Properties of Electroless Ni-P Coatings under Lubrication Using WPCA Sliding Friction and Wear Characteristics of Grade 410 Martensitic Stainless Steel Study on Mechanical Properties and Wear Behavior of LM6 Aluminum/Nano Al2O3 Composites The Effects of Applied Load on Wear Behavior of Al-Quarry Dust Particle Composite Disc Sliding against Automobile Brake Material An Investigation for Prior Failure of Engine Component through Spectroscopy Oil Analysis Program Effect of Load Variation on Elastohydrodynamic Lubrication Film Collapse Effect of Rolling Velocity and Maximum Hertzian Pressure on Fluid Film in Steady State EHL Line Contact with Rough Surface and Linear Piezoviscosity Performance Comparison of Partial and Full Textured Thrust Bearing Operating with Non-Newtonian Lubricant Stability Analysis of a Flexible Rotor Supported by Plain Circular Bearings with Micropolar Fluid Dynamic Analysis of a Flexible Rotor Supported on Two Turbulent Model Journal Bearings with Micropolar Fluid Lubrication Chapter 5: Thermodynamics and Thermal Engineering, Fuel and Diesel A Comprehensive Analysis on Thermal and Kinetic Aspects of In Situ Combustion: Numerical Approach A Numerical Investigation on the Performance of an Earth Air Heat Exchanger System for the Indian District of Nagpur A Phenomenological Model for Predicting Entropy Generation during Vaporization of Droplets in Engine Fuel Sprays Air Cooling in Automobiles Using Vortex Tube Refrigeration System An Experimental Investigation of Heat Pipe Flat-Plate Solar Collector with Water-Ethanol Mixture as a Working Fluid An Experimental Study of Forced Convective Fluid Flow in Divergent Minichannels Using Nanofluids An Experimental Study on Improvement in Thermal Efficiency of Mesh Wick Heat Pipe Analysis of Flow Mal-Distribution in a Cross-Flow Heat Exchanger Analysis of Oxygen Enriched Combustion Technology in a Single Cylinder DI Diesel Engine Assessment of Weld Joint Efficiency for Rolled and Welded Joint for Intermediate Heat Exchanger in Sodium Cooled Fast Reactor Characteristic Study of Isochoric Heating in a Pressure Vessel Charge-Discharge Characteristics of an Adsorbed Natural Gas Storage System under Ambient Conditions CO2 Capture onto Zeolite 13X and Zeolite 4A by Pressure Swing Adsorption in a Fixed Bed Comparison of Boiling and Condensation Characteristics in the Porous Wick of a Flat Heat Pipe in Vertical and Horizontal Orientation Computational Analysis of Two Phase Flow Distribution in a Horizonatal Pipe Design and Development of Online Steam Dryness Fraction Measurement Setup Development of Viscosity Based Correlation for Estimation of Higher Heating Value (HHV) of Diesel Fuel Effect of EGR on Combustion and Emissions Characteristics of a CI Engine Fuelled with Waste Chicken Fat Biodiesel Effect of Inlet Air Cooling on Simple Combined Cycle Performance Effect of Load and Interface Materials on Thermal Contact Resistance between Similar and Dissimilar Materials Effect of Mass Flow Rate of Inlet Gas on Holdup Mass of Solidcyclone Heat Exchanger Effect of Methanol Additive with LPG in Three Cylinder Four Stroke S.I. Engine Effect of Operating Temperature on the Performance and Thermal Load of Water/Lithium Bromide Vapour Absorption Heat Pump in the Absence of Solution Heat Exchanger Effect of Piston Shape on Scavenging in a Two-Stroke Engine - A CFD Analysis Effect of Solvent Ether (DEE) on Internal Combustion Engine with J20 Optimum Characterized Bio-Diesel Effects of Water-Diesel Emulsion on the Emission Characteristics of Single Cylinder Direct Injection Diesel Engine - A Review Exhaust Manifold Waste Heat Recovery System of a Single Cylinder Engine Expansion Joint Design, Manufacture and Testing for Large Capacity Steam Turbines Experience with Mechanical Seal of Prototype Fast Breeder Reactor's Secondary Sodium Pump during Testing Experimental Analysis of Cardanol Biofuel as an Alternative Fuel for Diesel Engines with Air-Side Oxygen Enrichment Experimental Investigation and Performance Evaluation of a Multi Turn Closed Loop Pulsating Heat Pipe Experimental Investigation of Four Stroke Diesel Engine Performance Using Neem Oil and Neem Oil with Hydrogen as a Fuel Experimental Investigation of Performance of Spiral Coil in Spiral Tube Heat Exchanger Experimental Investigation on Cotton Seed Based Bio-Diesel and Additive EMDFA 200 in Diesel Engine with Air-Pre Heating Experimental Investigation on DICI Engine by Using Chemical and Nano Additives Blended Biodiesel Experimental Investigation on Diesel Engine Using Processed Waste Engine Oil Experimental Investigation on Droplet Cooling of Brakes Experimental Investigations on Heat Transfer Enhancement in a Horizontal Tube Using Converging and Diverging Conical Strip Inserts Experimental Study of Effect of Nucleation Site Size on Bubble Dynamics during Nucleate Pool Boiling Heat Transfer Experimental Study of Heat Transfer Enhancement in Pool Boiling by Using 2-Ethyl 1-Hexanol an Additive Finite Element Analysis of Three-Fluid Heat Exchanger for Diesel Engine Exhaust Heat Recovery System Heat Transfer Analysis of Motorcycle Engine Cylinder Using CFD under Various Fin Geometries and Speed Condition Heat Transfer Studies on Condensation Using Heat Pipes Heatline Based Thermal Behaviour during Cooling of a Hot Moving Steel Plate Using Single Jet Influence of Fuel Injection Timing on the Performance and Emission Characteristics of a Diesel Engine Fueled with Jatropha Methyl Ester-Tyre Pyrolysis Oil Blend Influence of Injection Pressure on Performance and Emission Characteristics of Nerium Methyl Ester Operated DI Diesel Engine Investigation Analysis on the Performance Improvement of a Vapor Compression Refrigeration System Investigation of Single Water Droplet Evaporation over Aluminium Surfaces Using High Speed Camera and Image Processing Microcalorimetry and Kinetics of Biodiesel Mixed Convection in Lid Driven Square Cavity Using Finite Volume Method Natural Convection Flows in Porous Square Enclosures with Different Aspect Ratios New Design of Ignition System of Gas Turbine Numerical Investigation of Heat and Mass Flux Effects on Heat Transfer Characteristics of Supercritical Water in an Upward Flow Vertical Tube Numerical Investigation of Performance Studies on Single Pass PEM Fuel Cell with Various Flow Channel Design Numerical Simulation of Superheated Steam Flow in a Micronozzle Numerical Studies on Natural Convection Heat Transfer - Fins with Closed Top Numerical Study on Proton Exchange Membrane Fuel Cell with 2mmx2mm and 25cm2 Serpentine Flow Channel Optimization of Length of Mixing Zone in GH2-GO2 Based Torch Igniter, Applying Numerical Techniques Parametric Studies on Critical Parameters of Variable Displacement Oil Pump for Automotive Application Performance Analysis of Solar Water Heater in Multipurpose Solar Heating System Performance and Emission Characteristics of a Diesel Engine with Various Injection Pressures Using Bael Biodiesel Performance Evaluation of Diesel Engine Runs on Biodiesel Blending Performance of a Direct Injection Diesel Engine Using Jatropha Diesel Blends as Fuel Performance Studies on PEM Fuel Cell with 2, 3 and 4 Pass Serpentine Flow Field Designs PIV Measurements and POD Analysis during Natural Convection with Protruded Heater in a Rectangular Enclosure Prediction of HCCI Engine Performance with Three Zone Extended Coherent Flame Combustion Model Radiation Adhered with Conduction Heat Transfer Adopting Finite Volume Method Reductions of Bio-Diesel Exhaust Emissions through Engine Combustion Chamber Design Modifications - An Experimental Study Reliability Analysis of Overhauled Engines of Dumpers Review of Solar Cooking Using Latent Heat Storage Short-Pulse Collimated Radiation in a Participating Medium Simulation of Biomass Gasification Simulation Studies on Two-Dimensional Electronic Board with Multiple Non Identical Heat Sources Steady State Analysis on Efficiency Improving Methods for Series Flat Plate Solar Water Heaters Strength Analysis and Optimization Methods for Four Cylinder Engine Crankshaft Based on CATIA and ANSYS Temperature Prediction Methodology for a Missile Flying at Low and High Altitudes Theoretical Studies on the Application of Pulsating Heat Pipe in Vapour Compression Refrigeration System Thermal Design of Missile Airframe with Circumferential Variation in Wall Temperature Thermal Error Modelling in CNC Machines Thermochemical Cycles for Hydrogen Production Thermodynamic Analysis and Optimization of a CO2 Based Transcritical Refrigeration System with an Ejector Thermodynamic Analysis of Heat and Mass Transfer Enhancement for R134a-DMAC/CNT Vapour Absorption Refrigeration System Thermoeconomic Analysis of R134a-DMAC Vapour Absorption Refrigeration System Working Characteristics of a C.I. Engine Fuelled with Oxygenates as Additives in Jatropha Biodiesel Working Characteristics of a DICI Engine by Using Water Emulsion Biodiesel Fuels Experimental Analysis and Thermal Behavior of Conventional Flat Plate Collector and Sun Point Collector of 1 m2 Area Design and Analysis of an Automotive Vacuum Pump Design and Fabrication of Single Effect Absorption Cooling System of 5.25kW Cooling Capacity for Domestic Use Comparison of Performance of Diesel and LPG Blends in Dual Fuel Engine with Tallow Methyl Ester (TME) as a Fuel Comparision of Thermal Analysis in Mobile Phone Using Ansys An Overview of Biodiesel Extraction from the Third Generation Biomass Feedstock: Prospects and Challenges Chapter 6: Applied Fluids Mechanics in Design of Machines and Equipment Aerodynamic Performance Comparison of Airfoils by Varying Angle of Attack Using Fluent and Gambit CFD Analysis of the Twin Inclined Injection Flows in an Axi-Symmetric Duct along with Main Turbulent Flow CFD Modelling of Biomass Gasification in Fluidized-Bed Reactor Using the Eulerian-Eulerian Approach Effect of Convergent Angle on Flow Characteristics of Y-Shaped Diffusers Using CFD Effect of Inlet Air Temperature on Liquid Fuel Combustion in Taper Can Gas Turbine Combustion Chamber Flow Visualization Study on Radial Flow Pump under Cavitating Condition Non-Newtonian Computational Fluid Dynamics (CFD) Modeling on Left Coronary Artery with Multiple Blockages Numerical and Experimental Study of Cooling Fan Noise Numerical Simulation of Two Dimensional Laminar Wall Jet Flow over Solid Obstacle Pneumatic Transport of Coarse Grain Particle Using Air Mass Balance Model Simulation of Propulsive Dynamics of an Organism in a Viscous Fluid Using an Immersed Boundary Finite Volume Method Experimental Investigation and FE Modelling of Contact Mechanics Phenomenon in Reciprocating Hydraulic U-Seals for Defence Applications Investigation of ELAC 1 Aerodynamics Using CFD in Supersonic Flow CFD Analysis of Micro-Ramps for Hypersonic Flows Computation of Lattice Kinetic Scheme for Double-Sided Parallel and Antiparallel Wall Motion Transient Simulation of Flow Past Smooth Circular Cylinder at very High Reynolds Number Using OpenFOAM Miniature Four Hole Probe for Three Dimensional Boundary Layer Measurements Performance Analysis of Directional Control Valve: An Overview Chapter 7: Vibration and Control A Comparative Study on Road Traffic and Metro Train Induced Ground Vibration at CMTI for Establishment of Nano Technology Facilities A New Reactive Hybrid Membership Function in Fuzzy Approach for Identification of Inclined Edge Crack in Cantilever Beam Using Vibration Signatures A Novel Approach for Detection of Bearing Defects from Noisy Vibration Signal Analysis of MR Damper Based on Finite Element Approach Analysis of Transverse Vibration Modes of a Gun Barrel Subjected to Recoil Automatic Design of Fuzzy Rules Using GA for Fault Detection in Cracked Structures Crack Detection in Rotating Cantilever Beam by Continuous Wavelet Transform Effect of Location of Centre of Mass of a Semi-Independently Suspended Automobile on Natural Frequencies Effect of Thickness of Damping Material on Vibration Control of Structural Vibration in Constrained Layer Damping Treatment Experimental Study on Effect of Vibratory Flap Position on Dynamic Response of Clamped Rectangular Plate with Cut-Out Free Vibration Analysis of a Carbon Nanotube Reinforced Composite Beam Free Vibration Analysis of a Width Tapered Laminated Composite Beam Free Vibration Characteristics of Metallic Propeller Blade Replaced with Composite Material Using Finite Element Approach Hydraulic Circuit in Damper: An Overview Influence of Parameters of Cracked Rotor System on its Vibration Characteristics in Viscous Medium at Finite Region Investigation of Whole Body Vibration on Urban Midi Bus Linear Buckling and Vibration Behavior of Piezoelectric/Piezomagnetic Beam under Uniform Magnetic Field Nonlinear Dynamics of a Travelling Beam Subjected to Multi-Frequency Parametric Excitation Performance Comparison among Vibration Based Indicators in Damage Identification of Structures SPSS: A Data Mining Tool for Analyzing the Results of Flow Induced Vibration Excitation in an Elastically Mounted Circular Cylinder at Different Interference Conditions Vibration Analyses of the Bearing Using the Time Frequency Domain Technique Vibration Analysis of a Laminated Composite Magnetorheological Elastomer Sandwich Beam Vibration Analysis of a Timoshenko Beam with Transverse Open Crack by Finite Element Method Vibration Control by Time Delayed Linear and Non-Linear Acceleration Feedback Vibration Control of Slab Breaker Machine by Passive Dual Mass Tuned Vibration Absorber Dynamic - Thermal Analyses of a Structurally Reconfigured Electronics Package Onboard Mini Satellite Modal Analysis of a Container Filled with Water Chapter 8: Drive Systems of Machines, Mechatronics, Robotics and Control A Real Time Quality Monitoring System for Engineering Industry: A Practical and Rapid Approach Using Embedded Vision System with LabVIEW Design and Fabrication of Flexible Three Link Manipulator for Pick and Place Application Development of a Contact Based Human Arm Motion Analysis System for Virtual Reality Applications Fuzzy Based Control System for Interconnected Pneumatic Cylinder Linear Positioning System Fuzzy Logic Control of Low Cost Obstacle Climbing Robot Ground Controlled Auto Piloting Input Shaping for Feedforward Control of a Flexible Polymethyl Methacrylate Beam Manipulator Modelling and Comparison of Semi-Active Control Logics for Suspension System of 8x8 Armoured Multi-Role Military Vehicle Modern Advancement of Hydraulic Motor: A Review Neural Network Based Hybrid Adaptive Controller for an Autonomously Driving Car Using Thin Plate Spline Radial Basis Activation Function Performance Analysis of QAM with MEMS Based SCIR for Indoor Optical Wireless Communication Performance Analysis of Sculptured Diaphragm for Low Pressure MEMS Sensors Simulation and Implementation of Single Phase Boost - Buck Rectifier Using SPMC Topology with Reduced Input Current THD Spatially Hyper-Redundant Robotic Inverse Kinematics by Discrete Link Characterization Study of Energy Saving System for Hydrostatic Drive - A Review Velocity Estimation of Embedded Mobile Robot in Structured Man-Made Environments Design and Development of XY Micro-Positioning Stage Using Modified Topology Optimization Technique Some Analysis of Automated Guided Vehicle Optimization of PID Parameters in Electro-Hydraulic Actuator System Using Genetic Algorithm Simulation Study on Different Energy Efficient Hydraulic System: An Overview Speed Control of a Hydraulic Motor Study of Energy Recycling in Electro-Hydraulic System Study on Hybridization of Hydraulic System Used in Heavy Machinery Preparation of MR Fluid and Modeling of Magneto Rheological Fluid Brake (MRB) A Low Temperature Co-Fired Ceramic Microfluidic Cell Counter A Haar Wavelet Based Approach for State Analysis of Disk Drive Read System Computer Aided Design and Realization of a Snake Robot with Two Sets of Three Revolute Joint Mechanism Design and Analysis of Asymmetrical Spur Gear Drive for Automobile Gear Box Application Design and Simulation of Automotive Seat Height Adjuster Driving Mechanism Based on Multi-Body Dynamics Dynamic Control of a Pulsatile Jet Propelled Aquatic Robot Effect of Drive Side Contact Ratio on Direct Design Asymmetric High Contact Ratio Spur Gear Based on Load Sharing Fabrication and Experimentation of a Cantilever Beam Based Piezoelectric Actuator and Sensor for Vibration Energy Harvesting Kineto Static Design and Stiffness Analysis of a New Kind of 3-RRR Planar Parallel Manipulator Modeling and Simulation of Jetpipe Servovalve Torque Motor Vision Based Pick and Place Robot for Sorting Objects Using MATLAB Wave Disk Engine and its Feasibility Study through Numerical Simulation Design and Movement Analysis of Single Roller Omni Directional Wheeled Robot for Different Assembly Structures Chapter 9: Engineering Development on Sustainable Energy A Novel Computational Approach towards Maximum Power Point Tracking for Solar Photovoltaic and Wind Energy Systems Biogas Power System: A Step towards Utilization of Clean Renewable Energy Resource for Providing Optimum Energy Needs of Rural Areas in India Correlation between Absorber Plate Thickness and Collector Efficiency Factor F of Solar Flat-Plate Collector Design and Economic Analysis of a Combined Desalination Plant Using Parabolic Trough Collectors and Solar Photo Voltaic Technology Experimental Analysis of a Solar Desalination Prototype Experimental Investigation of Evacuated Tube Solar Collector with Annular Heat Exchanger Experimental Investigations on a 1.00 m2 Solar Gel Pond Grid Connected Load Mismatching Situation between Power Supply and Power Demand: Review of the Problematic Effects and Analysis for Unique Needs in Particular Reference to Tamilnadu Improving the Productivity of the Single Basin Solar still Modeling and Simulation of Buck Converter for Charging Battery by Solar Photovoltaic System Modelling and Economic Analysis of an Improved Duplex Solar still Novel Design of Solar Cooker with Bottom Feed Optical Analysis of Solar Parabolic Trough Collector with Flat Concentrating Photovoltaic Receiver Relation between Collector Efficiency Factor and the Centre to Centre Distance of Absorber Tubes of Solar Flat-Plate Collector Solar Water Distillation Using Two Different Phase Change Materials Thermal Performance Analysis and Optimization of Solar Assisted Heat Pump Water Heater Analysis of CPV System Vis-a-Vis SPV System for an Educational Institution In India Simulation of Hydrodynamic Conditions of a Photobioreactor for Microalgae Cultivation Estimation of Higher Heating Value of Waste Frying Oil from its Chemical Properties Energy and Exergy Analysis of Solar Parabolic Dish Thermoelectric Generator Biomass Briquette Characterization for Downdraft Gasification Optimization of Building Performance in Terms of Envelope Elements through Combined Energy Modelling and Generic Optimization Chapter 10: Labour Safety, Ergonomics, Reliability and Safety of Machines and Mechanisms A New Time Varying Hybrid Active Noise Control System with Online Secondary Path Modelling Accident Sequence Modeling Methodology for External Flood Probabilistic Safety Analysis of Prototype Fast Breeder Reactor Adaptive Algorithms for Active Noise Cancellation Using Time-Varying Convergence Coefficient An Automated Mitigation Model for Chlorine Release by Proposing Modifications in the Existing Plant Facilities Analysis of Chemical Degradative Effects on Low Voltage PVC Insulation Using DSC Can Time-Motion be Used to Reduce Occupational Hazards in Fleshing Process? Contaminant Control in Intensive Care Unit of Hospital Effect of Common Cause Failures on Redundancy Optimization Ergonomic Studies on Push, Pull, Lift and Carry in Gear Manufacturing and Assembling Industry Ergonomically Designed Lift - Assist Device in a EOT Crane Hazard Identification in Electrical Discharge Machining (EDM) Process Using What-If Analysis Investigation of Environment and Machining Aspects in Electrical Discharge Machining (EDM) Using Different Workpieces and Tool Electrode Investigation of Material and Manufacturing Process to Develop High Pedestrian Safety Composite Bonnet Life Cycle Estimation of an Automotive Seat Recliner with LCF Approach Mixed Mode Stress Intensity Factor Determination for Single and Multiple Cracks in an Aircraft Wing Parameters Influenced in Car Seat Design from Ergonomic Perspectives - A Review Strategies for Controlling Welding Fumes at the Source - A Review Studies on 'Labour Safety Climate' in Chemical Handling Industries with Specific Reference to Fireworks Study of Posture and Discomfort in Handling Machines in Manufacturing Industry Thermal Hazard Behavior of TBP and DBP Seismic Qualification of the Unconventional Valve by Shake Table Testing Chapter 11: Industrial Engineering A Comprehensive Study to Evaluate the Critical Success Factors Affecting Lean Concept in Indian Manufacturing Industries Analysis on Wastages in the Automobile Rubber Components Manufacturing Industry Application of Queuing Theory to Address Traffic Problems at a Highway Toll Plaza Critical Success Factors for Implementation of Lean and Green in Medium Scale Manufacturing Industries Design and Automation in Back Plug Press Fitting Process of Ball Pen Assembly Design of a Logistics Network in an Organisation for Optimising Logistics Cost and Inventory Using RSM and Genetic Algorithm Development of Just in Time (JIT) Implementation Models to Achieve Customer Delight Effect of Lean Principles on Organizational Efficiency Evaluation of Green Supply Chain Factors Using DEMATEL Evaluation of Lean Manufacturing Systems Using MADM and Fuzzy TOPSIS Evaluation of Mechanical Behavior of Multifilament Waste Fish Net/Glass Fiber in Polyester Matrix for the Application of Mechanized Boat Deckhouse in Marine Composites Fuzzy Quantitative Approach to Prioritize Green Factors in Supply Chain Green Manufacturing Approaches for the Foundry Sector Industrial Design of Motorcycle with Reference to Indian Population Inprocess Quality Control through Propotionate Valve in Electrical Upsetting of Engine Valves Lead Time Reduction through Lean Technique in an Monoblock (SWJ1HP) Pump Industry Network Design for Reverse Logistics - A Case of Recycling Used Truck Tires Role of Kaizens to Improve Productivity: A Case Study Study on the Implementation of Kobetsu Kaizen (KK) Pillar of TPM in a Process Industry Supply Chain Performance Evaluation Using Spreadsheet Simulation The Effect of Rescheduling on Operating Performance of the Supply Chain under Disruption - A Literature Review An Investigation on the Innovations in Steel Re-Rolling MSMEs with Reference to Industries in Kerala State, India Forecasted Inflation Based Block Replacement Model Using Stochastic Process Identification of Isomorphism in Kinematic Chains Using Hamming Method Deformation of Potato during Convective Drying Modeling & Analysis of End Milling Process Parameters Using Artificial Neural Networks

「Nielsen BookData」 より

詳細情報

• NII書誌ID(NCID): BB17003671
• ISBN:
  • 9783038351634
• 出版国コード: sz
• タイトル言語コード: eng
• 本文言語コード: eng
• 出版地: Pfaffikon
• ページ数/冊数: 3 v. (2765 p.)
• 大きさ: 24 cm
• 親書誌ID:
  • BA88918107