Material science and environmental engineering : selected, peer reviewed papers from the 2014 International Conference on Material Science and Environmental Engineering (MSEE 2014), March 21-23, 2014, Changsha, Hunan, China
著者
書誌事項
Material science and environmental engineering : selected, peer reviewed papers from the 2014 International Conference on Material Science and Environmental Engineering (MSEE 2014), March 21-23, 2014, Changsha, Hunan, China
（Advanced materials research, v. 937）
Trans Tech Publications, c2014
- : pbk
大学図書館所蔵 件 / 全1件
-
該当する所蔵館はありません
- すべての絞り込み条件を解除する
注記
Includes bibliographical references and indexes
内容説明・目次
内容説明
Collection of selected, peer reviewed papers from the 2014 International Conference on Material Science and Environmental Engineering (MSEE2014), March 21-23, 2014, Changsha, Hunan, China.
The 126 papers are grouped as follows:
Chapter 1: Chemical Materials,
Chapter 2: Metal Materials and Alloys,
Chapter 3: Electronic Materials,
Chapter 4: Nano-Scale and Amorphous Materials,
Chapter 5: Biomaterials and Healthcare,
Chapter 6:Mechanical Materials and Engineering,
Chapter 7: Structural Materials and Civil Engineering,
Chapter 8: Environment Protection and Sustainable Development,
Chapter 9: Environmental Science and Engineering,
Chapter 10: Computation and Management Engineering Application
目次
Preface, Organizing Committee and Sponsors
Chapter 1: Chemical Materials
The Effects of Electroplating Conditions on the Morphology and Glucose Oxidation Performance of Cu2O/TiO2
Synthesis, Adsorption Behavior of a Maleamic Acid Cross-Linked - Cyclodextrin Polymer for Removal of Basic Fuchsin in Aqueous Solution
Electrosyntheses of Poly(selenophene-co-3-methylthiophene) with Improved Thermoelectric Property in Boron Trifluoride Diethyl Etherate
Electrodeposition of Novel Cross-Linked Poly(methacrylic acid) Functionalized Poly(9-aminofluorene) Network Films
3D-Braided Thick Composites Made by Simultaneous Outside-in and Inside-out Resin Infusion
The Effect of Acetate on the Electrodeposition of Manganese on Polycrystalline Au without SeO2 Additives
Numerical Analysis for Cavitation Intensity's Effects on the Extend Angle of Convergence-Divergence Nozzle
Experimental Application of Salt Slurry in Talimu High Density Drilling Fluid Composed of KCl-Saturated Brine and Polybasic Alcohol
Preparation of 2,2-Dimethylol Propionic Acid
Reaction Routes for the Electro-Deoxidation of Ilmenite in Molten Salt
A Study on Relationship between Orientation Evolution and Coarsening Behavior of Cu6Sn5 Grains Formed on Polycrystalline Cu Substrate
Glass-Ceramics Obtained from Sewage Sludge and its Characteristics Affected by Alkalinity
Experimental Study of Urea Depositions in Urea-SCR System
Synthesis and Characterization of A2+B4 Hyperbranched Polyesters with Hydroxyl End Groups
Preparation of Polyamide 5,6 (PA56) Fibers and its Mechanical Properties
Inhibition and Recovery of Nitrification during the Process of Sludge Reduction Induced by a Metabolic Uncoupler, 2,6-Dichlorophenol (2,6-DCP)
Influence of Ethanol on the Interactions and Physical Properties of Binary Mixtures of 1-Ethyl-3-Methylimidazolium Based ILs at 298.15 K
The Corrosion Evaluation Methodology of the Lock Gate
Adsorption Behavior and Corrosion Inhibition of S-Benzyl o-Phenylenedioxydithiophosphate for Carbon Steel in Hydrochloric Acid Solution
First-Principles Study on the Surface Energies of Rutile TiO2(110) vs (011)-2x1 Surfaces
Optimization of Preparation Process of Essential Oil of Baokening Granule- -Cyclodextrin Inclusion by Orthogonal Test
Chapter 2: Metal Materials and Alloys
Research and Empoldering of High Strength Weathering Steel S450EW
Simulation of the Yield Strength of Mo Alloys at Both Room and Elevated Temperatures
Preparation and Photocatalytic Properties of Iron Titanate Compounds
Study on Laser Brazing for Copper
Expansion Behavior and Microstructures of Hypereutectic Al-Si Alloys Subjected to Thermal Cycling
Fatigue Damage Evaluation Research of Aluminum Alloy Based on Energy Degradation
Comparative Study of Copper Brazing with Ag-Cu-Zn and Ag-Cu-P Filler in Heat Treatment Furnace
The Research of Fatigue Properties of Steel Q235 Butt Welded Joint
Analysis of the Grain Refinement Mechanism for Commercial Pure Titanium by ECAP and SMAT
Corrosion Behavior of 13Cr Steel in Different Temperature
Microstructure and Properties of AZ31B Magnesium-LY12 Aluminum Alloys Diffusion-Bonded Joint
Research Progress of Mg-Re Alloys
Effect of Solution Treatment on Microstructures and Hardness of Mg-Gd-Y-Zr Alloy
Basic Properties of Iron and Steel Making Dust
Chapter 3: Electronic Materials
Effect of Acetate on Electrodeposition of Manganese from Chloride Electrolyte with SeO2 Additives
Molecular Dynamics Simulations of the Conductivity of Aqueous NaCl in the Presence of Sucrose and Electric Fields
Electron Transport in Zigzag Graphene Nanoribbons with a Tetra-Vacancy Complex: A Perfect Spin Filter
An Effective N, N-Diethylthiourea as Accelerator for Microvia Filling via Copper Electrodeposition
Adsorption Mechanism Study of Magnetic EDTA-Chitosan on Cu (II) Ions of Solution
Preparation, Characterization and Conductivity of Solid High-Proton Conductor Na7[CoW11O39Cd(H2O)]*12H2O
Chapter 4: Nano-Scale and Amorphous Materials
Synthesis of Co3O4 Multilayer Nanosheet Material and its Promising Gas Sensing Property
Influence of Ultrasonic Time on the Preparation and Properties of LaCoO3 Nanoparticles
Avoidance of Forbidden DNA Nanorobots Configurations in Patterned Immobilization of other Materials
Preparation of Carbaryl-Imprinted Capillary Monolithic Column for Screening of Carbaryl from Three Carbamates Mixture
Methylthiouracil-Templated Formation of the Fluorescent Silver Nanocluster and its Application to Bioimaging
A Facile and Efficient Method to Prepare Exfoliated and Reduced Graphene Nanosheets by Detonation
Chapter 5: Biomaterials and Healthcare
Drug Sustained Release Multiple-Component Polymeric Microparticles Fabricated Using an Electrospray Process
Adsorption Behavior of Rhodamine B and Methylene Blue by Chemical Modified Cornstalk Biomass
Pathogenic Fungi Induce the Expression of Trichoderma asperellum Cell Wall Degrading Enzymes in the Process of Mycoparasitism
Prevalence of Allergy and Complications Caused by Jewelry among Higher Vocational College Students
The Effect of Food-Microorganism(F/M)Ratio on Gas Properties in Batch Biogas Fermentation with Walnut Peel
Diversity and Distribution of Sulfate-Reducing Bacteria in Jilin Oilfield
Cultivation and Regulation of Sulfate-Reducing Bacteria in Oilfield
Application of Neural Network in Bioactive Prediction of Inhibitor of Thymidylic Acid-Based Synthetase
Chapter 6:Mechanical Materials and Engineering
Study on Fault Rule Prediction of Hydraulic System and its Accessories of Shipborne Aircraft
Analysis of Welding Residual Stress on Cracked Vessels with X-Ray Diffraction Method
Energy Consumption Performance Study of New S-Shaped Hysteretic Damper
Adhesive Mechanism and Experimental Study on Shear Adhesive Strength of Impact Ice
Design of the Hydraulic System of Lead Plate Coiling Machine
Influence of Vibration on Thermomechanical Property and Transformation Behavior of TiNi Shape Memory Alloy
The Design and Development of a Single-Axle Parallel Hybrid Powertrain Test Platform
The Research of the Rolling Element Bearing Fault Signal Frequency Domain Feature Extraction Method Based on the Wavelet Packet Decomposition
The Influence of the Diameter Ratio between Rigid Body and Particle on the Impact Strength Exerted on the Rigid Body Impacting Particles
Research on Perovskite Catalysis for Diesel Engine Exhaust Removal
Research on Operation Mechanism and Application in Engineering of UNITANK Process
Thermodynamic Analysis of the Internal Melt-Ice-on-Tube during Melting under Natural Convection
Introduction of a Thermal Response Test (TRT) Apparatus Used for Measuring Underground Heat Exchanger Characteristics
The Application of Paste Tailing Technology in High Latitude Cold Area
Elastic Modulus Influence on the Forming Precision of Grinding Tool Bended for the Aspherical Surface Grinding
Rotating Angle Error Influence to Grinding Aspheric Optical Component
Effect of Carding Plate Gauge under the Licker-in of Carding Machine on Polyester Yarn Hairiness
Design and Trial-Production of Emergency Power Supply System Battery Based on Chemical Hydrogen Production
Complex Image Recognition Method of Train Wheels Based on Contour Feature
Chapter 7: Structural Materials and Civil Engineering
Study on the Effect Evaluation of Spinescence Application on Segregating Gratings of Expressway - Taking Wu (Ding) - Kun (Ming) Expressway as Example
Comparison Study of Structural Stabilities for H-Section Columns Built with Ordinary Grade Strength Structural Steels According to Boundary Conditions and Lengths at High Temperature
Bridge with Lead Rubber Bearing Finite Element Analysis Based on ANSYS
Numerical Simulation on a Deep-Foundation Pit of Shenzhen Holiday Plaza Project
Piled Raft Structure Finite Element Analysis of Composite Foundation Settlement in Da XI Passenger Dedicated Line
Fluctuations Response of Tall Building to Change of Aspect Ratio in Interference Building
Performances of Manganese Slag Cement
Historical and Cultural Connotation of the Architectural Wood Carving Ornament in the Ancestral Temple of Chen Family - With "Feast in Bronze Sparrow Terrace Held by Cao Cao" and "Jiantu Conference" as Examples
Lost Wax Casting Process Design of Artificial Jade Cup Basing on Blast Furnace Slag
Analysis of Sound Absorption Properties of Three-Leaf Microperforated Panel Absorbers without a Rigid Backing
Influence of Alkaline Activator on the Strength of Fly Ash-Cement Gel Sand Material
Moulding Process Design of Artificial Purple Jade Ship Basing on Blast Furnace Slag
The Construction of City Complex Intelligent System
Chapter 8: Environment Protection and Sustainable Development
Nitrogen Oxides Reduction by Zeolite Sorbents in Manufacturing Use
Study on the Effect of Streambed Substrate on Invertebrate Diversity
An Extended-Range Hybrid Solar-Cell and Battery Powered Bicycle
Experimental Study on Biogas Production by Mesophilic Fermentation with Dimocarpus Longan Pericarp
Research on Environmentally Friendly Water-Based Covering Ink and its Application in Scratch-Type Invoice Printing
Study on Reuse of Power Lithium Ion Battery Recycling
Safety, Heath, and Environment (SHE) Case for Oil & Gas Operating Company
Design and Development of the Environmental Protection Mobile Enforcement System
Energy Consumption Performance Study of New Box-Shaped Hysteretic Damper
Assessment and Characteristics of Heavy Metal Contaminated Soil in the Vicinity of a Zinc Mine Dump Heaps
Application of the Head-Tail Method to Determine Irrigation Coefficient in Hongguang Irrigation District
Calculation of Parameters of Crop Water Production Function of Jensen Model Based on Stochastic Particle Swarm Optimization Algorithm
Effects of Grazing on Reproductive Allocation of Elm in Horqin Sandy Land, Northeastern China
Water Resources Optimal Allocation in Middle Line of South to North Water Diversion Project of Hebei, China Using AHP-LP
Study of the Differences between Vegetation and Soil Spectrum about Alpine Wetland Ecosystem
Toxicity of Three Heavy Metal Pollutants of the Pharmaceutical Wastewater to Paramecium Caudatum
Responses of Water Holding Characteristic of Crown Debris and Litter in a Cunninghamia Lanceolata Stand to Ice-Snow Damage
Study on Particle Breakage of Coarse-Grained Soil Based on Large-Scale Triaxial Test
The Research of Slope Stability Based on Unsaturated Soil Theory
Chapter 9: Environmental Science and Engineering
Comparative Researches on the Provenances of Suspended Sediments in Different Reaches of Dongtiaoxi and Xitiaoxi Watershed
Introduction to Midas GTS Software Application in Design of Deep Foundation Pit
An Overview of Different Distillation Technologies for Drinking Water Preparation
Erosion Experiment of Self-Excited Oscillation Pulsed Jet
Ozon/Hydrogen Peroxide System for Degradation of Humic Acid in Water
Experimental Study on Dynamic Characteristics of Self-Excited Oscillation Pulsed Jet
The Study of Groundwater Modeling of Plain Area in Shiyang River Basin - I Groundwater System Conceptual Model Construction
The Study of Groundwater Modeling of Plain Area in Shiyang River Basin - II Groundwater Modeling and Validation
Removal of Heavy Metals from Contaminated Soils by Washing with Citric Acid and Subsequent Treatment of Soil-Washing Solutions
Preparation of Calcium Silicate Using Hazardous Solid Wastes and its Application in Treatment of Phosphate-Containing Wastewater
Multi-Scale Analysis of Marine Environmental Situation in the Caofeidian Nearshore District
Garden Plants under Global Climate Change
The Nutritional Status of Waters and Origin Analysis of the Xitiaoxi Tributaries
Chapter 10: Computation and Management Engineering Application
The Evaluation in Fuzzy Matter-Element Theory Based on Hybrid Weight
RETRACTED: ALB: A Methodology for the Simulation of the Producer-Consumer Problem
Analysis of Relaxation and Relaxation Training on Sprint Performance Impact
A New Method and Applications of the Boundary Value Problem of Differential Equation
Changchun College of Architecture Electrical Design for Sheling Campus Library
Optimized Research for Mobile Communication Strategy Based on Parallel Computing
The Stochastic Imperfection Method of Sheet Space Structure Based on Truncated Univariate Normal Distributions
「Nielsen BookData」 より
