Machinery, materials science and engineering applications 2014 : selected, peer reviewed papers from the 4th International Conference on Machinery, Materials Science and Engineering Applications (MMSE 2014), June 28-29, 2014, Wuhan, Hubei, China
Author(s)
Bibliographic Information
Machinery, materials science and engineering applications 2014 : selected, peer reviewed papers from the 4th International Conference on Machinery, Materials Science and Engineering Applications (MMSE 2014), June 28-29, 2014, Wuhan, Hubei, China
(Advanced materials research, v. 940)
Trans Tech Publications, c2014
- : pbk
Available at / 1 libraries
-
No Libraries matched.
- Remove all filters.
Note
Includes bibliographical references and indexes
Description and Table of Contents
Description
Collection of selected, peer reviewed papers from the 4th International Conference on Machinery, Materials Science and Engineering Applications (MMSE 2014), June 28-29, 2014, Wuhan, Hubei, China.
The 117 papers are grouped as follows:
Chapter 1: Advanced Materials and Materials Processing,
Chapter 2: Applied Mechanics, Mechanical Engineering and Design,
Chapter 3: Control Systems, Electrical and Power Engineering,
Chapter 4: Computational and Information Technologies
Table of Contents
Preface and Conference Committees
Chapter 1: Advanced Materials and Materials Processing
The Effect of Relative Thickness on Microstructures of TiB2/TiC Particles Reinforced Carbon Steel Matrix Surface Composite
Influence on Rare Earth Re3+ by the Performance of Composite Brush Plating of Ni-P
Optical Properties and Zinc Nitride Thin Films Prepared Using Magnetron Reactive Sputtering
Strain-Hardening Polyvinyl Alcohol Fiber Cement Optimization and Component Tailoring
Investigation of Solvent-Dependent Catalytic Behavior of a Hydrophobic Guest Artificial Glutathione Peroxidase
Research on Ni-P-Carbon-Nanotube Electro-Brush Plating Composite Coating Technology
Effect of Addition of Sc, Zr, Er on Microstructure of Al-Mg Ingot to Generate Welding Wire and Micro-Hardness of Surfacing Layer
Seperation of Microcystin-RR and Research of its Storage Conditions
Analysis of the Solubility of TNT and RDX in TNT/RDX/SC-CO2
Effect of Surface Morphology and Microstructure on Powdering Resistance Performance of GA Coatings with Different Aluminum Contents
Preliminary Review of the Influence of Cavitation Behavior in Creep Damage Constitutive Equations
The Status and Development of Water Treatment Technology for Supercritical Unit
Modifying Sodium Bicarbonate for Foaming Polymers
Chapter 2: Applied Mechanics, Mechanical Engineering and Design
Study of Breeze Vibration of Overhead Transmission Lines with Dampers Using FEM Analysis
Study on Inspection Methods for High-Speed Progressive-Die Punched Strips
The Influence of Friction Coefficient on Tenon/Groove Contact Performance in Nickel-Based Turbine Blade-Disc
Fatigue Life Analysis of Mine Hoist Drum
Optimization Design for the Stationary Platen Based on Uniform Design
Calculation and Analysis of Dynamic Characteristic for Four-Cylinder Engine's Crankshaft
Study on Dynamics Simulation of Long Range Rocket Artillery Launch Guider in Firing Process Based on ADAMS
Application of the Magnetostrictive Displacement Sensor in the Self-Propelled Artillery in the Performance Test
Simulation on the Vehicle Frontal Collision Based on the PC-Crash
Study on Analysis of Certain Artillery's Planetary Transmission Design Based on ANSYS
Application of FTA-FMEA Method in Fault Diagnosis of Tracked Vehicle
Failure Analysis and Troubleshooting for Certain Tracked Artillery Deviation
Optimization Design on Variable Cycle Engine Performance Based on Genetic Algorithm
Research on Transmission Approach between Title Bar Information of Engineering Drawing and PDM
The Design of Detect Equipment of the Self-Propelled Artillery Hydraulic System Based on Data Fusion Technology
Dynamic Simulation Analysis of the Crane Hoisting Process Based on Adams
Research on the Gear Box Fault Diagnosis of Self-Propelled Artillery Based on Vibration Signal Analysis
Research and Design for the Calibrating Device of Self-Propelled Artillery's Center Line
Structural Design and Analysis of Abrasive Disk for Biplane of Multiple Workpieces
Kinematic Performance Evaluation for Heavy Duty Industrial Robot
Kinematics Analysis and Torch Pose Fitting for Welding Robot
Design of Automobile Body Welding Fixture
Cylindrical Cam Profile by CMM Based on Pro/E Model
Research Status and Development Trend of Dimethyl Ether Fuel Supply System
Construction of the Precision Solution Spraying System Based on Single-Axis Servo Control
Experimental Research on the Stiffness of Hyperboloid Shallow Shell
CFD Analysis for Cooling Water Cavity of a Four-Cylinder Gasoline Engine
Design and Research for a New Car Moving Device of Remote Control
The Hardware Design of Test-Bench for Motor Energy Efficiency Based on Torque-Meter Method
Innovative Design of Circular Loom Based on Integration of Axiomatic Design and Design Structure Matrix
Design and Analysis of a Climbing Mechanical Appliance
Analyzing the Technical Evolutionary Paths of Converter Tilting Mechanism and Forecasting the Further Development Tendency
Research and Application of Cold-Rolled Sheet of MES System Based on Real-Time Database
Design of a Four-Station Translational and Rotary Worktable for Special Occasions
Dynamic Analysis of Spiral Bevel Gear Pair under Time-Varying Backlash
Research of Pipeline Weld Detection Based on Magnetic Memory Technology
The Effect of Face and Side Panels of Honeycomb Core on its Equivalent In-Plane Elastic Properties
Parametric Design of Jib in Rapid Design System of Tower Crane
Research on Crack of Cylinder Bracket Based on Numerical Simulation and Finite Element Analysis
Analysis and Structure Modified of Gun's Unreliable Percussion
Design and Optimization of Lifting Mechanism Based on a Kind of Rotary-Type Desk
Analysis of Axial Holding Capability about the Lengthened Shrink-Fit Holder and Cutting Tool System
Fire Rescue Robot Design Based on Solidworks
Cleaning Machine Design of Building Glass Curtain Wall
Analysis of a Micro-Displacement Amplification Mechanism Based on Piezoelectric Stack
Parameter Identification of Surface Roughness in Ultra-Precision Turning Processing Based on GA-RBF Neural Network
The Simulation and Improvement of the Heating Furnace Lifting Framework Based on ANSYS
Research on the Punching Method of Multi-Position Progressive Die with the Feature Unit as the Step
Fault Diagnosis for the Electric Starting System of Self-Propelled Artillery Based on Information Fusion Technology
Test Study on Slipping Performance of the Flexible Nodes of the Precast Concrete Exterior Wall Cladding Panel
Design of Internal Structure of Ammunition Storage and Transportation Shelter
Conformal s-Shaped Inlet Design and Flow Field Characteristics of Flying Wing Unmanned Aerial Vehicle
Simulation of Characteristics of Debris Cloud Produced by Hypervelocity Impact
The Safe Auxiliary System for Aircraft's Forced Landing
3D Printing Manufacture Micro-Channel Structure by Metal Micro Droplet-on-Demand Deposition
Remote Sensor Lens Design Based on the Matching of Materials
Design and Analysis of Suspension Scheme for Space Manipulator Low-Gravity Test
Chapter 3: Control Systems, Electrical and Power Engineering
The Research on the Current Situation of Micro-Grid
The Current Research on STATCOM
The Overview of Energy Storage Technology
The Review of of Active Power Filter
The Research on the Key Technologies in PV System
Optimization Design on Subspan Oscillation of Multi-Conductor
Analysis on Electromagnetic Properties of Lapped Joints
Magnetic Circuit Optimization Design and Simulation Analysis of Electromagnetic Inertial Actuator
Research on Power Communication Network Integrated All-Optical Switching
Signal Testing System of Electronic Equipment Based on Bluetooth and LabVIEW
Research and Implementation of High-Speed Positioning Control Base on Feedforward PID Control
Research of Vehicle Trajectory Tracking Based on Human-Simulated Intelligent Control
Motor Torque Stability and Controlling Research in Variable Load Condition
The Thermal Analysis and Simulation of On-Chip Temperature Control Technology in the Micro-Gyroscope
Studies on the Active Control and Placement of Piezoelectric in Piezoelectric Cantilever Beam
Research on a New Type of Self-Propelled Artillery Control System Test Equipment
Design of Controlled Fire Bottle Filling Equipment of New Self-Propelled Artillery
Experimental Study on Detection Method of Micro-Fluidic Chip
Solar Array Mounting Effects on Flutter Characteristics of Solar-Powered UAV
Waste Electronics Recycling System Based on Electronic Information Platform
Attitude Control of Flying Wing UAV Based on Active Disturbance Rejection Control and Multi-Object Nonlinear Control Allocation
Chapter 4: Computational and Information Technologies
The G'/G-Expansion Method for Solutions of Evolution Equations
Evolutionary Game Simulation of "Wave Phenomenon"
Research on the Three-Dimensional Displaying of STL ASCII and Binary File
Development of NC Wire Cutting Automatic Programming System Based on Component Technology
Research on Multi-Criteria Decision Based on Bidirectional Grey Relation Projection Method
Study and Application on 3D Printing Cloud Service Platform
Study and Implementation of Index Mechanism for GML Data
Telecommunications Experimental Platform Based on E-Bridge Learning Software
Wireless Sensor Network Localization Algorithm Based on Hop-Count and Distributed Learning
Label's Verification Technology of Gateway Based on Trusted Label
Network Access Control Technology Based on Trusted Label
Study and Design of CAN/LIN Hybrid Network of Automotive Body
The same Space-Time Exact Matching Method for the RFID and Image of Moving Vehicle under High Speed Free Flow Road Conditions
A Novel Modeling Method Based on Multi-Dimensional Taylor Network and its Application in Time Series Prediction
Research and Implementation of Safety Verification of Polynomial Hybrid Systems Based on Symbolic-Numeric Method
Influence of Attributes Relationship to Parameter Estimation in DINA
Research on On-Line Fault Calculation Software for Regional Networks Based on Expert System
The Research of Expert System on Cloud Manufacture Service Platform
Adaptive Planning Method for Measuring Points of Blade Section Line
Precision and Dimensional Analysis about Parallel Mechanism Having Less Degree of Freedom Based on Differential Geometry
The Application of Image Enhancement Technology in Ammunition Fuze Safety Detector
Design of Portable Online Detector of the Communication System of some Type
Design on General Development Platform for Complex Equipment Maintenance and its Simulation Training
A Fast Trajectory Planning Algorithm Research for Point-to-Point Motion
Research on Complex Equipment Reliability Growth AMSAA-ELP Model Based on Explore Learning Promotion
Research on Technique to Identify and Process the Fluorescence Picture by Computer
The Mould Management System and Application Based on Agile Supply Chain
by "Nielsen BookData"