Materials and processes technologies V : selected, peer reviewed papers from the 5th International Conference on Manufacturing Science and Engineering (ICMSE 2014), April 19-20, 2014, Shanghai, China

著者

• International Conference on Manufacturing Science and Engineering
• Han, Jingtao
• Liu, Xianghua
• Jiang, Zhengyi

書誌事項

Materials and processes technologies V : selected, peer reviewed papers from the 5th International Conference on Manufacturing Science and Engineering (ICMSE 2014), April 19-20, 2014, Shanghai, China

edited by Jingtao Han, Xianghua Liu and Zhengyi Jiang

（Advanced materials research, v. 941-944）

Trans Tech Publications, c2014

• : [set]
• Part 1
• Part 2
• Part 3
• Part 4

注記

Includes bibliographical references and indexes

内容説明・目次

内容説明

Collection of selected, peer reviewed papers from the 2014 International Conference on Manufacturing Science and Engineering (ICMSE 2014), April 19-20, 2014, Shanghai, China. The 508 papers are grouped as follows: Chapter 1: Alloys and Non-Ferrous Materials, Chapter 2: Iron and Steel, Chapter 3: Composites, Chapter 4: Micro/Nano Materials and Technologies, Chapter 5: Ceramics, Chapter 6: Optical/Electronic/Magnetic Materials and Technologies, Chapter 7: Building and Construction Research, Chapter 8: Environment-Friendly Materials, Chapter 9: Biomaterials and Bioresearch, Chapter 10: Polymer Materials, Chapter 11: Film Materials, Chapter 12: Textile Materials and Technologies, Chapter 13: Corrosion and Surface Treatment Technology, Chapter 14: Materials Mechanical Behavior and Fracture, Chapter 15: Surface Engineering / Coatings Technology, Chapter 16: Forming Technologies, Chapter 17: Material Machining, Chapter 18: Welding and Joining, Chapter 19: Micro-Fabrication Techniques, Chapter 20: Laser Processing Technology, Chapter 21: Machining Tools, Testing Technologies and Error Measurement, Chapter 22: Modeling, Analysis and Simulation of Processes, Chapter 23: Thermal Engineering Theory and Applications, Chapter 24: Mineral and Soil Mining and Processing

目次

Preface and Conference Organization Chapter 1: Alloys and Non-Ferrous Materials Influence of Overburning on Microstructure and Property of 2024 Aluminum Alloy Effects of Nb Element on Mircostructure, Thermal Conductivity and Melting Point of Cu-Ni-Nb Alloy Prepared by Vacuum Arc-Melting Dissolution of Alumina in Molten Aluminum Electrolyte Based on Perforated Anode Surface Characterization and Machinability of Zirconium Alloys in View of Jewelry Application Hot Deformation Behavior and Microstructural Evolution of Al-Zn-Mg-Cu Alloy with Different Starting Structures Discussion on Technologies of Preparation of Foam Aluminum Metallic Material by Infiltration Casting Method Effect of Indium on Precipitation Kinetics of an Al8Si0.4Mg Cast Alloy Influence of MgO on Calcium Aluminate Slag System with Lower Calcium Processing Map of Mg-13Al-3Ca-3Zn-1Nd-0.2Mn Magnesium Alloy Structure and Dynamical Relaxation in Undercooled Liquid of Cu50Co50 with Miscible Gap The Effect of Mixed RE Elements on Microstructure and Mechanical Properties of Die-Cast AZ91D Alloy Use of Strain Energy Density W and Qo as Quality Indices to Study the Effect of Hipping on Cast Aluminium Alloy 354 under Different Aging Conditions Strain Rate Sensitivity and Adiabatic Shear Deformation of an Advanced Al-Mg Alloy Comparison of Mechanical Properties of 357-T6 Aluminum Alloy Aast under Gravity Permanent Casting and Low Pressure Die Casting Diffusion Bonding of Commercially Pure Titanium to Q235B Using Copper as Interlayer Mechanical Properties of A356 Aluminum Cast Alloy Shaped by Permanent Mold Casting Superplasticity Mg Alloy Fabricated by Friction Stir Processing The Technique Study on Silicon Brass Recrystallization Annealing Aided by Electric Pulse Treatment Wettability, Surface Tension and Work of Adhesion of Cu-Ti Alloys on Yttria Partially-Stabilized Zirconia at 1273K Combustion Synthesis Sintering of Ni-Al Powder Alloys Influence of High Magnetic Field on -a Phase Transformation in TC4 Titanium Alloy Low Temperature Superplasticity of 5083 Aluminum Alloy Prediction of TCP Phases in Nickel-Base Superalloys Chapter 2: Iron and Steel Bake Hardening Properties of Ultra-Rapid Annealed Ultra-Low Carbon Bake Hardening Steel Study on Internal Quality of Billets for 20CrMnTiH Steel Study on Microstructure and Properties of X80 Pipeline Steel Study on Microstructure and Property in Heat-Affected Zone of X80 Pipeline Steel Thermal Simulation Study of CGHAZ Austenite Grain Growth Behavior of X80 Pipeline Steel Research on Mechanics Performance of TP304H Austenitic Stainless Steel in the Process of Aging at High Temperature Experimental Study on Hydrogen Selective-Reduction of Niobium Containing Iron Ore Powder Research on the Corrosive Factors of Q235 Steel in Simulate Ammonium Sulfate Solution of Ammonia Desulphurization Microstructure and Mechanical Property Analyses of Brazing Titanium and Low Carbon Steel Using Silver-Based Brazing Alloy Research and Application of Basic Tundish Covering Flux Research of Producing Reduction Steel Powder from GCr15 Steel Scrap The Research Status of Titanium Clad Steel Oxidation Behavior of T91 Steel in Water Vapor Atmosphere at 750 DegreesC Research on the Size Distribution of Intragranular and Boundary Carbides of T91 Steel after Creep Analysis on Alloying Elements of Selective Oxidation of TRIP Steel High Temperature Oxidation Behavior of SUS310S Austenitic Stainless Steel Preparation and Characterization of Iron-Oxide-Coated-Zeolite Adsorbent Experimental Study on Refractory Weathering Steel Cold-Rolled Sheets Recrystallization Annealing Analysis of Boride Phase Composition in High Boron Alloyed Stainless Steel Containing Titanium Chapter 3: Composites Synthesis of Sulfur-Doped Graphene from Sulfonated Polystyrene The Properties of the Sodium Silicate Binder Composition Based on Quartzite Deposits Study on Microstructure of Continuous Cf/Al Composite Material Prepared by Hot Pressing Diffusion Method Change Regulation of Hardness of Target around Crater Penetrated by Wf/Zr-Based Amorphous Matrix Composite Projectile Adsorption of Cu(II) from Aqueous Solution onto Na-Bentonite/Poly AMPS/AA/AM Composite Effects of Fillers on the Dynamic Properties of a High Performance Elastomer at Varying Strain Amplitude Morphology, Thermal, Dynamic Mechanical and Mechanical Properties of Long Glass Fiber Reinforced Thermoplastic Polyurethane Elastomers and Polyvinyl Chloride Composites Investigation of Surface Roughness after Turning of One Kind of the Bio-Material with Thermoplastic Matrix and Natural Fibers Microstructure and Tribological Properties of Cu-Fe Based Braking Materials Preparation and Wear Performance of Novel Graphite/Copper Alloy-Matrix Self-Lubricating Composite Materials The Fabrication of High Silicon-Aluminum Composites and the Thermal Conductivity Study on Properties of Modified Porous Starch/ Natural Rubber Composite The Influence of SiO2 on Properties of Cellulose Aerogel Design, Fabrication and Characterization of Fused Silica-Based Composites with an LTCC-Derived FSS Effect of Cycle Index on the Microstructural Evolution of Alumina Particles Reinforced Aluminum Composites Treated by Cryogenic Treatment Influence of Cooling Speed on the Microstructure of Particles Reinforced 7055Al Composites Subject to Regulatory Cryogenic Treatment Preparation and Characterization of Resin-Derived Carbon Foams Containing Hollow Microspheres A Study of Polyurethane Rubber Composite Modified Asphalt Mixture Fluorescence Properties of Electrospun Bio-Based Polyamide/Eu(TTA)3phen Composite Fibers Preparation of Poly(m-toluidine)/Montmorillonite Composites and its Thermal Stability Effect of Diffusion Annealing on Defects Reduction of 6.5wt% High Silicon Steel Composite Plate after Hot Deformation Investigation of Heat Treatment's Influence on the Preparation of High Silicon Steel Composite Sheet Iron Loss Measurement on 6.5wt%Si Composite Plate Prepared by Clad Casting and Conventional Rolling Processes Production of 6.5wt%Si Composite Thin Sheet by Cold Rolling Process Study on Heating Treatment of 45steel/60Si2CrA Multi-Layer Composite Armor Plate Study on Mechanical Property of 1Cr17/9Cr18MoV Multilayer Composite Armor Plate Study on Superabsorbent Material in Thermal Infrared Camouflage Chapter 4: Micro/Nano Materials and Technologies A Hydrogen Peroxide Electrochemical Sensor Based on Co-Doped Fe3O4 Nanoparticles Effect of Collect Distance on the Fabrication of Aligned Nanofiber by Parallel Electrode Research Profiling of Carbon Nanotubes from 2000 to 2013 The Raman Properties of Ag Doped ZnO Microrods Synthesized by Chemical Vapour Deposition Large-Scale Synthesis of Water-Dissoluble Nanorods Fabrication of PLA Nanoporous Fibers by DMF/CF Mixed Solvent via Electrospinning Fabrication of PEG Hydrogel and PDMS Microstructures by a Simple UV Curing Process for Nanobio-Chip Applications Performance of Electrospun Nanofibres on Adsorbing Gaseous Aromatic Compounds Properties of Metallic Materials after Surface Self Nano-Crystallization Simulation of Electric Field for Carbon Nanotube Assembly by Dielectrophoresis The Influence of Zn/Zr Ratios on CuO-ZnO-ZrO2 Catalysts for Methanol Synthesis from CO2 Hydrogenation Modification of the Fine - Aggregate Concrete by High Disperse Silica Fume and Carbon Nanoparticles Containing Modifiers Preparation and Mechanics Properties of the EP/TiO2 Nanocomposites Progress of Studies on Fabrication of TiO2 Nanotube Arrays on Ti or Ti Alloys by Anodization Study on Preparation and Property of Regenerated Liquid Reactive Dyes Regenerated Magenta The Effect of Different Ratio in Carbon Aerogel on Pore Structure in Ambient Dry Influence of Softener on Rheological Characteristics of the Nanostructured Modifier Insertion versus Growth of Magnetic Nanoparticles in MgB2 Superconducting Composites High Density Dislocation and Magnetoplasticity in Nano-Sized Alumina Reinforced 7055Al Composites Subject to High Magnetic Field Effect of Carbon Nanotubes on Microstructure of Multiphase Composite Al2O3 Ceramics Quasicontinuum Analysis of Dislocation Propagation during Nanocontact Prepare and Formaldehyde Sensing Properties of Hollow Nanofibers In2O3 Polarization Dependent Nonlinear Absorption in Au Nanowire Array Research on Surface Modification of Nano-TiO2 Enhanced Mechanical Performance of Electrospun Graphene/Polyacrylonitrile (PAN) Composite Microfibrous Yarns via Post-Processing Influence of Complexing Agent on the Structure and Properties of Electrodeposited Fe-Co Alloy Nanowires Chapter 5: Ceramics Dispersion Stability of Hydroxyapatite-Calcium Phosphate Glass Ceramic-Tertiary Butyl Alcohol System Microwave Dielectric Properties of Low-Fired Nd2Ti2SiO9 Ceramics with BaCu (B2O5) Addition Effects of Cr2O3 Addition on Mechanical and Electrical Properties of Alumina Ceramic Effect of Copper Micro-Scale Excess on the Dielectric Properties of CaCu3Ti4O12 Ceramics Prepared via Tape Casting Effect of H3BO3 Additive and Forming Pressure on Microwave Dielectric Properties of 0.95MgTiO3-0.05CaTiO3 Sintering Behavior of Lead Oxide Ceramic Prepared by Microwave Sintering Research and Transformation of Rotary Surface Discharge Machining Equipment of Engineering Ceramic Effect of Tb4O7 Doping on Wear Resistance of High-Alumina Ceramic Low-Temperature-Tunnel of High-Alumina Ceramics with Good Wear Resistance Preparation of the System of MgO-CaO-SiO2-Al2O3-Y2O3Wear-Resistant Alumina Ceramics Study of Nonlinear Current-Voltage Characteristic of Semiconductor Ceramic by the Method of Tilted Energy Band The Ways to the Main Problems in the Application of Low Temperature Co-Fired Ceramics Technology (LTCC) Study on the Crystal Bonding Mechanism of Al2O3-ZrO2 Ceramic Composite Effect of Calcite Content on Firing Characteristics and its Sintering Properties of Nixing Pottery Analysis of Pop-In Phenomenon in the Process of Ceramic Materials Instrumented Indentation Chapter 6: Optical/Electronic/Magnetic Materials and Technologies A Life Prediction Model for LEDs Lamps Based on the Thermal Life Theory Characteristics Research of Gallium Arsenide Solar Cells under Femtosecond Laser Illumination Research on the Mechanism and Model of Contact Resistance Test Systems for Life of LED Light Based on Junction Temperature The Modification of Anatase TiO2 (001) Surface by N or S Atom: A DFT Investigation Effect of Temperature on LiMn2O4 Prepared by Molten-Salt Combustion Synthesis Electrochemical Title Performance of LiMn2O4 Synthesized by Flameless Solution Combustion with Acetate System Carrier Injection in High Gain GaAs Photoconductive Semiconductor Switches Modeling of the Stress-Dependent Hysteretic Dynamics of Ferroelectric Materials Synthesis, Characterization and Photophysical Properties of a New CuI Complexe Contain Bis[2-(diphenylphosphino)phenyl] ether and 7,10-Dimethyl Pyrazino [2,3-f][1,10]phenanthroline Research on Bonded NdFeB Arc-Magnets Electron Avalanche Domains in High Gain Semi-Insulating GaAs Photoconductive Semiconductor Switches Manufacture Technology for Large Lightweight Optical Materials A PbS/ITO/Glass Based Photoelectrochemical Cell with a Sponge-Like Surface Structure Photoionization in GaAs Photoconductive Semiconductor Switches Research and Implementation on Methods of Evaluating Lifetime of LED Light Source for LED Lighting System Synthesis of a Novel Donor Unit for Organic Light-Emitting Materials: 10-octyl-3,7-Di(thiophen-2-yl)-10H-phenothiazine Chapter 6: Optical/Electronic/Magnetic Materials and Technologies The Luminescence Properties of Ca3(BO3)2 Doped with Ce3+, Tb3+ Technological Development of 6.5wt%Si Electrical Steel Production Influence of Nd-Doping on Electronic Structure and Optical Properties of ZnO Optical Properties of 5,5'-(9,9-dioctyl-9H-fluorene-2,7-diyl)Bis(thiophene-2-carbal dehyde): A Novel Organic Light Emitting Material Fabrication and Lead Ion Removal Property of Magnetic Hydroxyapatite Composite with Hierarchically Urchin-like Microstructure Study on Microwave Absorbing of Tourmaline and Dravite/ZnO Complex Powders Modelisation of Permeability as a Function of Induction and Temperature by the Brillouin's Function for the Formalization of the Magnetothermal Problem Chapter 7: Building and Construction Research Comparison Study on Road Performance of Modified Asphalt Mixture for Intermediate Course Establishment and Research on the Rebound Curve to Detect Pump Concrete Compression Strength with Resiliometer Finite Element Analysis of Dynamic Splitting Tensile Mechanical Properties of Reinforced Concrete Flush Rule and Initial Flush Analysis of Cement Concrete Pavement Mechanism Analysis on Concrete Column's Recovery Strengthening Study of Bond Behavior between Concrete and Steel Bars Based on New Beam Specimens Study of Model Tests on Large-Span Tunnel's Damage Caused by Overload with Arch Cover Method Study on Moment-Curvature Hysteretic Model of Steel-Concrete Composite Box Beam Resistance of Polymer Dispersion Additive Modified Concrete to Light Liquids Action Analysis on Bearing Capacity of Retaining Wall with Anchor Experimental Study on the Mechanical Properties of the Crumb Rubber Concrete Modified by Latex The Introduction of Micro-Pile in Building Heightening and Transformation A Study on the Snowdrift Patterns of Gable and Flat Roofs Using a Wind Tunnel Effect of Co-Doped Steelmaking Slag and Fly Ash on Performance of Permeable Concrete Experimental Research on Shear of Interface between New and Old Concrete with Bond-In Reinforcement and Practical Calculation Experimental Study on Ratio of Bending-Compressive Strength of the Crumb Rubber Concrete Modified by Latex Nonlinear Analysis of Concrete-Filled Steel Tubular Columns under Blast Loading Study on the Ultimate Bearing Capacity of Concrete Filled Steel Square Tubular Short Column with PBL A Study on Influence of Shape of Aggregate on Strength and Quality of Concrete for Buildings and Pavements Influence of Superplasticizer S-3 on the Technological Properties of Concrete Mixtures Tests Results Strength and Thermophysical Properties of Aerated Concrete Block Wall Samples with the Use of Polyurethane Adhesive Applicability Study of Peck Formula Applied to Shield Tunneling in the Loess Area Bearing Performance Test Research of Shallow Arch Circular Concrete Filled Steel Tube Support Current Status and Development Trend of Assembled Structure in Cold Regions The Energy Efficiency of Residential Buildings with Light Walling Highly Filled Building Materials Reduced Flammability Modern Building Materials and the Concept of "Sustainability Project" Research on the Influence of Fiber Web to the Axial Compression Performance of EPS Composite Insulation Wallboard Restrained Shrinkage Behavior of Concrete under Different Environmental Conditions Risk Evaluation of the Subway Foundation Pit Based on Variable-Weight and Matter-Element Theory The Implementation of Waste Sawdust in Concrete Electrochemical Behaviors of Q420 Hot Galvanized Plate in Simulated Concrete Pore Solution Modernization of Residential Buildings of the 1960s Shear Strengthening Effects of RC Beams Using Aramid Plate Strip The Quickly Erected Buildings in Modern Construction Compound and Engineering Application of Fiber Reinforced Concrete with Low Shrinkage The Research of Concrete Short Columns Strengthed with Angle Steel Microstructure and Mechanical Properties of Laminated Mg-Based Composites The Engineering Application of Carbon Fiber Reinforced Concrete Beam Modeling of Reliability for Anti-Condensation Wall System in Underground Engineering Based on Markov Process The "Comfort in all Respects" Principle Implementation by the Example of an Elementary School Character and Development Analysis of Foam Concrete Cooperating Rice Husk Ash The Energy-Efficient Heat Insulation Thickness for Systems of Hinged Ventilated Facades Shield Tunneling Parameters Optimization Based on Dynamic Bayesian Networks The Historical Characteristics and New Developments of Settling Spaces on Bridges Chapter 8: Environment-Friendly Materials Effect of Formamide on the Mechanical Properties of Thermoplastic Protein Films Mechanistic Study on Adsorption and Oxidation of NO over Activated Carbon Study on Metal Chelation Adsorption of NO Using Fe(II)EDTA Solution in Power Plant Impact of Biochar on Water Holding Capacity of Two Chinese Agricultural Soil Application Research of Slow-Release Fertilizer in Plant Camouflage Study on CO2 Adsorption of Sepiolite Modified by Silane Coupling The Full Immersion Test Research of Refractory Weathering Steel Hydraulic Performance of Olive Stone Filtration Systems Organobentonites for Controlled Release of Diazinon Study on the Storage Stability of High Neutralization Degree Phosphate-Bonded No-Bake Sand Chapter 9: Biomaterials and Bioresearch A Comparison Study of the Effects of Ultrasonication on the Gelation Behavior between the Silk Fibroin of Domestic and Wild Silkworms Determination of Luteolin by Fluorescence Spectrometry Dynamic Models of Cell Growth and its -Carotene Synthesis from the Red Yeast Mutant Extraction Technology and Determination of Total Flavonoid in Magnolia Liliiflora Petals Fractal Modeling Research in Permeability of Camellia and Bancoul Nut Cakes under Cold-Press Improving the Yields of Carotene from Red Yeast by Using Ultra High Pressure and its Mutagenic Mechanism Synthesis of Tung Oil Monoglyceride Analysis of Key Odor Compounds in Steamed Chinese Mitten Crab (Eriocheir sinensis) Chemical Constituents Study of Weixian Turnip (Raphanus sativus L.) Comparison of Volatile Compounds in Raw and Cooked Chinese Mitten Crab Hepatopancreas and Gonads Effect of Cold-Induced on Quality of Black Carp Fillet Stored at Controlled Freezing-Point Microstructure Analysis of Xanthoceras Sorbifolia Shell Activated Carbon Optimization of Microwave Pretreatment without a Reagent of Pineapple Peel Optimizing Clarification of Pineapple Peel Preparation and Evaluation of Calcium Alginate/Glycyrrhizic Acid Hydrogel Preparation of Antioxidant Hydrolysates from Round Scad (Decapterus maruadsi) Protein by Composite Enzymatic Hydrolysis Purification of Enzymatically Produced Trehalose by Saccharomyces cerevisiae Strains Carrying Compound UV- and NTG-Induced Mutations The Establish of Four Kinds of Chinese Primary Economic Crab Species Fatty Acid Fingerprints Effects of Water Temperature on Biochemical Characteristics of Mandarin Fish during Live Transportation The Effect of Modified Atmosphere Packaging on the Quality of Sturgeon Caviar at 0 DegreesC Characteristic Changes of Protein Occurring in Brine Salting Sturgeon at Different Levels of NaCl Comparative Analysis of Amino Acid Composition in Antarctic Krill and White Shrimp Component Analysis, Quality Measurement and Antioxidant Activity of Sambucus williamsii Seed Oil Dicamba Degradation Using O3/UV Process in Aqueous Solution Physicochemical and Rheological Properties of Gelatin Extracted from Tilapia (Oreochromis niloticus) Skin and Concentration Effect Physicochemical Properties of Biodegradable Tilapia Skin Gelatin Film and Gelatin-Polysaccharide Based Composite Films Plant MicroRNAs Responsive to Fungal Infection Shortening Fermentation Period of Fermented Sausage by Adding Exogenous Enzymes Study on Defluorination Effect of Antarctic Krill by Chemical Treatments The Expression Analysis of WUSCHEL Gene under High and Low Temperature in Tomato Seedling The Expression Analysis of the YABBY Transcript Factor-SlYABBY2a in the Tomato Seedling under Low Light Towards Enhanced Bioactivity: Calcium Ion-Doped Polypyrrole Vacuum Assisted Extraction of Indirubin from Radix isatidis through Orthogonal Test Method A Bioaerosol Detection IRLidar Effects of Different Purification Methods on Chicken Feather Keratin Effect of Different Temperatures on Storage Quality of Fresh-Cut Apples Finite Element Analysis of Femoral Fracture System Influence of Operating Parameters on Physicochemical Properties of Fruit Juice Powders Produced by Spray Drying Chapter 10: Polymer Materials A Novel Cement Fluid Loss Additive P1402 A Self-Oscillating Polymer Chain with High LCST Activation Energy of Autonomous Polymer Chains with High LCST Preparation and Drug Release Behavior of IPN Hydrogel of Polyethylene Glycol and Octane Succinyl Chitosan The Optimization Plastic Coefficient in AWC Research and Application Effect of Relative Humidity on the Morphology of Electrospun Gelatin Aqueous Solutions Melting, Crystallization Behaviors and Mechanical Properties of iPP Nucleated by Nucleation Masterbatches Rheological Properties of all Para-Position Polysulfonamide Spinning Solutions Simulation of the Flow-Induced Crystallization of Polypropylene Based on Molecular Kinetic Model Study on Resin Infusion Behavior of the CFRP Integrated Manufacturing Process Based on RFI Process A Novel Synthesis Process of PPTA by Nitrogen Cooling for Reaction Heat Removal Crystallization Behavior and Crystal Morphology of PP/POEg Blends The Kinematic Research in the Manufacture of Rigid Polyurethane Rubber Micro-V Grooves Influence of Solvent Content on Properties of UHMWPA6 Fibers Prepared by Gel-Spinning Method Chapter 11: Film Materials Fabrication of Self-Organized Porous Anodic Alumina Film in Malonic Acid Effects of Thickness on Resistance Switching Properties of ZnMn2O4 Films Deposited by Magnetron Sputtering Investigation of Phase Transformation and Optical Properties of TiO2 Thin Films Deposited by Electron Beam Evaporation Reaction Mechanism of Atomic Layer Deposition of Al on the Si (100) Surface: A Density Functional Theory Study Effect of Al-Induced Crystallization on Structure of CdZnTe Thin Films Deposited by Radio Frequency Magnetron Sputtering Influence of Sputtering Power on the Properties of CdS Thin Films Deposited by Magnetron Sputtering Recent Progress in Gasochromics of Nano-Structured WO3 Film and its Applications Structural and Optical Properties of (Al, Co) Codoped-ZnO Thin Film Study of the Capacitive Properties of Strontium Barium Niobate Deposited by Radio Frequency Magnetron Sputtering Chapter 12: Textile Materials and Technologies Eco-Friendly Dyeing of Silk Fabric with Sodium Copper Chlorophyll Fabrication of Twisted Continuous Nanofiber/Cotton Hybrid Yarns The Exploration of Nickel Iron Fiber Absorbing Fabric Chapter 12: Textile Materials and Technologies Analysis on down Coat Fabric Design Principle and Method of Digital Multicolored Warp Jacquard Fabric Parameters of High-Density Soft Breathable and Anti-Velvet Fabric Technology Research on the Ballistic Performance of UD Cloth/3D Fabric Composite Target Testing of the Dynamic Permeability and Deformation of Airbag Fabrics Comparative Study between DSC and Two Complementary Performance Evaluation Methods for PCM-Treated Textiles Chapter 13: Corrosion and Surface Treatment Technology The Effect of Wear and Corrosion Resistance of Austenitic Stainless Steel on Plasma Carburizing Study of EMISE Ionic Liquids Inhibitor on the Corrosion Behavior of Steel Rebar by Statistical Methods in Alkaline Chloride Solution Multiple Regression Corrosion Models and Corrosion Mechanism of High Chromium Cast Iron under Phosphoric Acid Medium Condition Application of Visual Basic (VB) Language on Stress Corrosion Cracking Test of Materials Oxidation-Resistance of (Ti,Al,Nb)N Coatings Prepared by Arc Ion Plating Interaction Concrete with Acidic Fluids Application of Origin in Material Corrosion Experiment Effect of New Corrosion Inhibitor on Electrochemical Behavior of Prestressed Steel Wire in Simulated Concrete Pore Solution Impact of Local Concrete Crack on the Prestressed Steel Stress Corrosion Cracking Industrial Application of Pb-Ag-Ca Anode with Surface Passivation for Zinc Electrowinning Investigation on Electrochemistry Behavior of Fe-Cr-Ni Alloy in Caustic Solution Research on the Nitriding Effect of Ta-10W with Change of Process Parameters The Micro-Fabrication of Multidimensional Structure of Silicon by Selection Corrosion Process Design of Strengthening and Toughening Treatment for 65Mn Steel by Powder RE-Boronizing Method under Low Temperature Chapter 14: Materials Mechanical Behavior and Fracture Analysis on Fracture Mechanism of T92 Steel under High Temperature Multiaxial Creep Ballistic Resistance of AA5083-H116 Aluminum Plates against Conical-Nose Steel Projectiles Impact Piston Contact Stress Analysis and Simulation The Damage Analysis of Composite Laminate under the Action of Low Speed Impact and Static Pressure Mark Development and Change of Compressive Strength for Class G Oil Well Cement under High Temperature Method for Determining the Plastic Properties of Metallic Materials by Instrumented Indentation with Dual Pyramidal Indenters Study on Flow Mechanism of Gas Injection in Porous Carbonate Core Effect of True Strain on Processing Maps for Processed Ni-Based Superalloy below -Transus Temperature Effect of Strain on Microstructures and Mechanical Properties of Warmly Deformed SCRAM Steel for Fusion Application Influence of Carbon on Mechanical Behavior of Fe-Mn-C System Alloys Multiscale Simulation of Crack Propagation Based on Molecular Dynamics Numerical Simulation Study on High-Cycle Fatigue Damage for Metals Evaluation of Mechanical Properties of Hastelloy C-276 Weld by Small Punch Test Constitutive Modeling for Superplastic Flow Behavior of H62 Alloy Correlation Degree Analysis on Temperature and Operating Pressure to Stress Corrosion Cracking Susceptibility Experimental Study on Shot Peening to Improve Diaphragm Spring Fatigue Life of Automobile Clutch Prediction of Flow Stress for Superplastic Tension Deformation Quantitative Analysis of Instability for Superplastic Tension Theoretical Deduction of Constitutive Equations with Variational Parameters during Superplastic Tension Influence of Grain Size and Lamellar Spacing on the Fatigue Crack Propagation in -TiAl Alloy Study on the Microstructure and Fracture Mechanism of Stable Phase Containing Tial Alloy The Fatigue Behavior of Carbon Fiber-Reinforced Composite T300/Epoxy under Tension-Tension and Bending Fatigue Loading Research on the Relationships between Plastic Viscosity of Picking Liquids and its Tack Value Texture Evolution of Commercially Pure Copper during Ultra-Thin Strip Rolling Regularity of Decreasing Strength Limit at the Time of Concrete's Freeze-Thaw Cycling The Preparation and Tribological Properties of Graphite Fluoride Nonlinear Model and Numerical Solutions of Large Deformation of Functionally Graded Conical Shell Calculating Fatigue Life of Helicopter Composite Blades Based on the Residual Strength Theory Aircraft Composite Structures Fatigue Durability Test Method The Preparation and Performance Study of Thermal Insulating Materials with Diatomite Mechanical Response of Ping-Pong Racket to Different Hyperelastic Surface Materials Research on Grind-Hardening Process through Integration of Physical Experiments and Dynamic Simulation Chapter 15: Surface Engineering / Coatings Technology Hydrophobic Coating on Silicon Wafer by Use of Industrial Coating-Bar Process in Atmosphere Parameter Slip Length Measurement of Water Flow on Graphite Surface Using Atomic Force Microscope The Influences of Additives and Heat Treatment on the Properties of Electroless Plating Ni-W-Mo-P Alloy on the Aluminum Research and Development on the Antiaging Polymer Coatings Preparation and Characterization Composite Ceramic Coating Doped with ZrO2 Particles on TC4 by MAO Preparation and Characterization of Al(OH)3 Coated CaF2 Composite Powder Preparation of Pd Composite Membrane and its Surface Morphological Changes after Elevating Temperature in Different Atmoshphere Research on the Microstructure and Properties of Coating on Galvannealed High Strength IF Steel Preparation of PAI Composite Coatings and its Tribological Behaviors New Technology of Electroless Silver Plating on Fly Ash Cenospheres with Thermo-Alkaline Activation Preparation of Superhydrophobic Surfaces with Different Degrees of Oleophobicity Progress in Thermal Barrier Coatings for Gas Turbine Engines FE Modeling of Stress Distribution in MAO Coating on TC4 Substrate under Thermal Shock Cyclic Loading Investigation of Durability T = f (vc) in Turning of the AISI 304 Austenitic Stainless Steel Using the CNMG 120408 Coated Carbide Insert Research on Wear Characteristics of CVD Composite Coated Tool in Natural Marble Cutting Densification Behavior and Microstructure Evolution of Laser Surface Melting Processed Silicon-Containing Micro Arc Oxidation Coating Influence of Additive on Morphology and Nucleation Mechanism for Zn-Electrodeposition Preparation and Antimicrobial Properties of Surface Antibacterial Layer of Aluminum Chapter 16: Forming Technologies Effect of Drawing Processes on Wire Breaking in Steel Wire Production Effects of Parameters on Fine Blanking of Steel Synchronizer Ring Teeth Runner Balance Design of Soap Box Compounding Cavity Based on Moldflow Study on Deformation Law of Drum-Shaped Blank and Collapse Defect in Rolling Process Study on Spring-Back of CU11000 Clad AL1050 Sheets The Application and Research on Manufacturing Technology of the Heavy Forging The Application of Steady-State Thermal Expansion of the Rolls in Thickness Setup Model for HSM The Optimization of Thickness Model Adaption in Hot Strip Mill Research on Tension and Correction of Filming Steel Strip on Hydrosol Salivation Machine Experimental Study on Three-Dimensional Flexible Stretch Bending Formability for Complex Cross-Sectional Profiles of TWB The Effect of Screw Speed on Extrusion Quality of the Single-Screw Extruder Numerical and Experimental Investigation on Hot Stamping of Ultra-High Strength Steel Coupled Thermo-Mechanical FEM Simulation of Multi-Pass Vertical-Horizontal Rolling Process Development of Environmentally Friendly Binder in Extrusion Molding Effect of Mid-Roll Shift on the Strip Flatness for CVC 6-H Mill Effect of Steel Strip-Feeding Process on Solidification Structure Metal Average Deformation Velocity and Forward Slip Model for Longitudinal Profiled Plate Rolling Process Optimization Design of Evaporator Tube Plate Mold Based on PDX Stress-Strain Analysis of the Sun Shaft in Cross-Wedge-Rolling Study of Isothermal Split-Die Precision Forging Process of High-Strength Aluminum Alloy Complex-Shape Forgings Study of Submacroscopic Melting of Polymer in Single Screw Extrusion - Physical Model of Polymer Granule Melting Study on the Influence of Thickness and Width on the Post-Buckling Deformation of Cold-Rolled Strip Technique of Extrusion Die Tolerance Analysis Based on CAT The Influences on Microstructure and Segregation of the Jumbo Slab Ingot by Different Cooling Speed On-Line Measurement of Rheological Properties of LDPE, HDPE and LDPE/MICA Systems in Single-Screw Extrusion Study on Convergence, Calculation Speed and Precision of Flatness Analysis Method for Cold Rolling Strip Causes and Remedies for some Physical Defects in Rotary Swaged Products Experimental Investigation on Rotary Punching by the Compression of Polyurethane Pad Influence of Rotary Forging Process on Microstructure and Properties of Niobium-Titanium Alloy Key Technical Analysis of Roll Forming for High Strength Rectangular Tube Numerical Simulation of Polyurethane Pad Punching Process Preliminary Investigations on Preparation of Cu-Al Bi-Metallic Tubes Using Swaging-Diffusion Method Research Status of Sheet Metal Blanking Processes Technology of Finite Element Analysis for Roll Forming Process Analysis of Metal Deformed Flow under Adhesive Friction by Ring Upsetting Investigation on the Effect of Liquid Hammer Geometry to the Pressure Distribution of Innovative Hybrid Impact Hydroforming Large Container End Plate Stretch Forming Technology Oval Aluminum Tube Extrusion Process Simulation with Two-Hole Dies Research on Finite Element Simulation of the Big Size Spring Steel in Continuous Grooveless Rolling The Ring's Axial Deformation Control Method of Vertical Hot Ring Rolling Process Problems of Cold-Bent Notched C-Shaped Profile Members Study on Simulation and Experiment of Micro Sheet Metal Forming The Pressed Products on the Basis of Gypsum Effect of DROF Process on the Temperature Field and Roll Force Simulation to the Temperature Field for Continuous Casting Billet during Direct Rolling of Free-Heating The Strain Analysis of Plate Cross Wedge Rolling of Spiral Shaft Parts Research on a Kind of no Punch Hollow Part Hydraulic Pressure Expand Mould Manufacturing Process for Bush Type Bearing Metal Using Centrifugal Casting Chapter 17: Material Machining Efficiency Analysis on the Synthetically De-Icing Technology Combining Thermal Water-Jet Cutting with Mechanical Milling Study on Cutting Performance of the Alumina Based Nanocomposite Ceramic Tool TC4 Titanium Alloy Surface Crack Detection and Analysis A Processing Predictive Model of Ultrasonic Vibration Grinding Assisted Electric Discharge Machining Based on Support Vector Machines Design and Tuning of the Ultrasonic Wide-Blade Horn for Joining and Cutting Non-Woven Fabrics Study on Virtual Machining Process of Peripheral Milling of Thin-Walled Workpiece The Evaluation of the up and down Milling Based on its Chip Experimental Study on Effects of Feed per Tooth on Shear Angle and Friction Angle in Orthogonal Milling of Titanium Alloy Experimental Study on Electrochemical Drilling of Micro Holes with High Aspect Ratio Chapter 17: Material Machining Study on Material Removal Mechanisms of Surface Fatigue Layer Based on Handheld High Velocity Arc Machining Experimental Study on the Optimization of Ti1023 Milling Parameters Research and Development of Ultrasonic CNC Cutting Path Generation System for Nomex Composite Materials Optimization of Electric Discharge Machining Parameters of Al-7%Si-4%Mg with 20% of Red Mud Metal Matrix Composites Simulation of Residual Stress in Cold Working of Flat Spiral Springs Polishing Experiment Study of the Elastic Coated Abrasives Machinability Assessment of Titanium Alloy Ti-6Al-4V for Biomedical Applications Study on Key Technologies of Handheld High Velocity Arc Machining Equipment The Cooling Characteristics of Quenching Mist under Different Conditions Chapter 18: Welding and Joining Microstructure and Bending Property of Welding Joint Prepared by 5356 Welding Wire Added Sc, Zr and Er Study on the Thermal Expansion Displacement during Spot Welding Depending on the Multi-Physical Coupling Finite Element Model Research on the Laser Welding Technology of LF21 Study of End Cracking during One-Sided Submerged Arc Welding with Flux-Copper Backing Arc Characteristics and Droplet Transfer Analysis of Disconnect Impulse Arc Welding for Repairing Surface Default of Metal Parts Influence of Heat Treatment on Microhardness and Microstructure of the Joining Interface for Ti-24Al-15Nb-1.5Mo/TC11 Microstructure and Properties of Mg/Al Dissimilar Joints by GTAW with Al-Si Filler Wire Research on Surfacing Welding and Machining Process of Large Valve Corrosion Resistant Layer The Effect of Joule Heat on Coupling Temperature Field of Friction Stir Welding The Microstructure and Properties of TIG Welded Joint of AZ31B/Cu Dissimilar Metal Ultrasonic Horn Design and Weldability in Thin Ni Plates Welding Experimental Research of Activating Fluxes in A-TIG Welding of 5052 Aluminum Alloy Relationship between the Microstructure of the Welded Steel Plates and the Efficiency of Vibration Stress Relief Weld-Bonded Joints Properties with Advanced High Strength Steel DP600 Sealing of Sapphire Infrared Windows by Ultrasonic Interfacial Deposition Soldering The Implementation of Martensitic Heat-Resistant Steel Welding Performance Analysis and Process Characteristics Evaluation of Weld and Deposited Metal Zones in the Case of Welded with Inconel 718 Filler Metal to Cast Steel for Piston Crown Material Performance of Cohesive Zone Models for Brittle and Ductile Adhesives Improvement of the Wear Resistance of A6061 Plate by Resistance Seam Welding with High Carbon Iron Alloy Powders Welding Spark Parameters Determination for Cyclone Removal Calculation Chapter 19: Micro-Fabrication Techniques Experimental Research of Hydrogenous Fuel Production from Biogas for Usage in Fuel Cells of Autonomous Power Supply Systems High-Speed, High-Precision Magnetic/Piezoelectric Hybrid Drive Actuator for Micro Electrical Discharge Machining Influence of Grain Size and Grain Boundary of Workpiece on Micro EDM Model Structure and Simulation Analysis of a Novel Magetic Suspension Spindle Apparatus for Micro EDM Study on the Effect of Tool Polarity and Tool Rotation during EDM of Non-Conductive Ceramics The Periodical Translocation Gear-Grinding Technique to Improve the Indexing Accuracy of Ultra-Precision Gears Experimental Investigation of Fabrication of Double Tapered Hole Array by Using Electroforming and Mask Electrochemical Machining Exploration of Hyperfine Micro-Machining Limit Microfluidic Chips with Micro-Pillar Array for Cell Capture Thermal Accumulation in Metal Micro-Parts Fabricated by Micro Droplet Deposition Manufacturing Technique Chapter 20: Laser Processing Technology Contrast Prediction for Laser Direct Part Marked Data Matrix Symbols on Titanium Alloy Substrates Study of Effect of Laser Marking Data Matrix Symbols on Titanium Alloy Sheets Using Nd:YAG Laser Experimental Research on Affect of Water Jet to Laser Compound Processing of Crystalline Silicon Influence of Laser Input Current and Water Jet to Etching Amount of Polycrystalline Si Wafer Thin Wall Formed by Multi-Layer Overlapping Laser Cladding Forming Laser-Energy-Density Dependent Formation of Al2O3-TiC Coating by Laser-Assisted Combustion Directly Manufacturing Mouse Mold by Plasma Deposition Manufacturing SLC Technologies for Ferroalloy Part Surface Modification Laser Cladding of Co-Based Alloy on 316 Stainless Steel Formation of TiC0.3N0.7/TiN Composite Film on Ti-6Al-4V Alloy by YAG Laser Irradiation Chapter 21: Machining Tools, Testing Technologies and Error Measurement New Method of Plane to Plane Parallelism Error Measurement Based on Flatness Plane Modeling and Identification of Geometric Error Based on Screw Theory Measurement Uncertainty Evaluation of a Virtual Instrument for Thickness Monitoring of Brush-Plated Coating Efficient Genetic Algorithms for Measurement of Flatness Error and Development of Flatness Plane Based on Minimum Zone Method Simulation Analysis and Experimental Study of Initial Permeability Testing Technology The Study of Closed-Loop Position Control System Based on CNC Processing Chapter 22: Modeling, Analysis and Simulation of Processes Influences of Edge Rolling on Unsteady Deformation of Metal in Roughing Stage of Continuous Hot Strip Rolling Mathematical Model of Topology Modification of Tooth Surface and Error Characteristics Modeling for HAGC Press System of Rolling Mill Computational Solution of Contact Problems with Unilateral Constraints and Friction by Step-by-Step Analysis Simulation and Analysis of Material Horizontal Vibration Conveying Based on DEM The Fiber Orientation Angle Determination for a Composite Anisotropic Solid Rod in Pultrusion Application of Two Damage Identification Methods Based on Sensitivity Analysis in Steel Structure Prediction and Control of Hot Pressing Rebound of Fan Blade Based on Thermal Mechanical Coupling Simulation Analysis of an Orbital Grinding System for Grinding Crankshafts for Large Ship Engines Influence of Cold-Rolled Strip Temperature on the Interference Fit of Entire Roller Embedded Shapemeter Roll Numerical Simulation and Process Analysis for Injection Forming about the Thin-Wall Conical Centrifugal Disc Numerical Simulation of Liner Curvature Radius on Formation of LEFP Study on Transverse Uniformity of Phase Transformation for Hot-Rolled Strip on Run-out-Table Finite Element Modelling of Copper by Equal Channel Angular Extrusion Hot-Rolling Batch Planning Problem of Round Bar with Roller Capacity Modeling and Virtual Simulation of Hard Surface Milling and Forming Process Using Advanced CAE Systems The Inverse Prediction for Profile Extrusion Die Based on the Finite Element Method A Numerical Approach for Simulating a Self-Contacted Elastic Rod A Schwarz Alternating Algorithm Using Elliptical Arc Artificial Boundary for Exterior Problems with a Concave Angle Material Removal Model and Experimental Analysis in the CMP of Si-Based Fiber Array Research on FEM Simulation of Splitting Spinning Progress about 2024 Aluminum Alloy Finite Element Simulation of Seven-Hole Propellant Extrusion and the Optimization of Die Compression Ratio Modeling of Multilayered Sheets for Thermoforming Applications Numerical Investigation on Angle of Repose of Cylindrical Particles Chapter 23: Thermal Engineering Theory and Applications Diffusion and Oxidation Wear of Superhard Cutting Tool Based on Thermodynamics Enthalpy Stress Modeling of Large Cylindrical Ingot Heating Process Study of Crack Length Measurement and Crack Tip Plastic Zone Determination by Infrared Thermography The New Model of Laminar Cooling System and its Fieldbus System Experimental Research on Crock-Type Metal Fibre Burner of Chinese Cooking Appliance Cooling Rate, Microstructure and Property Studied of Spray Cooling of Heavy Shell Ring Rolling The Transient Temperature Field Simulation and Analysis of Machinery's Components by ABAQUS Numerical Simulation Analysis of Rail Head for U75V in the Process of Spray Cooling Temperature Field Study on Energy Saving Model of Air Condition for Subway Station Effect of Normal Pressure on the Coupled Temperature Field of Pin-Disc in Electromagnetic Environment Experimental Study on Film Cooling Efficiency of Flat Plate through Infrared Thermography Technique ISO 11439 I-Cylinder Bonfire Test and Safety Evaluation Modelisation of Calorific Capacity by the Debye and Brillouin Functions for the Formalization of the Magnetothermal Problem Energy Consumption Analysis of Thermal Regeneration of Activated Cokes Loaded with SO2 The Influence from the Return Water Temperature of Condenser on the Cooling Capacity and Power Consumption of the Cold-Water Screw Unit Used on Cold Storage Application of Thermal Contact Resistance in Simulation of Heat Dissipation by CPU Heat Sinks Based on ANSYS Heat Transfer Capacity of Composite Cooling System for Automobile Lithium-Ion Battery with Heat Pipe and Phase Change Materials The Influence of the Position of the Steel Element to Heat Flow in the Wall of the Industrial Freezer Effect of Model Structure on Thermal Conductivity of Sandwich Composites Thermal Insulative Performance of Bamboo Leaf Aerogel Opacified Using Activated Carbon Compared with Carbon Black The Influence of Induction Heating to Remelting Temperature Radial Distribution Theoretical Analysis and Experimental Study on Heat-Transfer in Cryogenic Gas Atomization Jet Cooling Nickel-Base Alloy Thermal Stress Distribution Simulation Analysis for Disc Brake of Heavy Vehicles Thermomechanical Coupled Analysis of Multidisc Friction Pairs in Hydro-Viscous Drive Thermal Structure Coupling Analysis of Universal Mill's Horizontal Roller Ring Based on ANSYS The Research of the Effect of Velocity on Coupled Temperature Filed in Pin-on-Ring Friction Pair under Electromagnetic Field Research on Design and Principles of New Regenerant for Restoring Performance of Aged Pitch Chapter 24: Mineral and Soil Mining and Processing Hydraulic Fracturing Technology Design in Natural Fracture Reservoirs Study on Floor Pressure Relief Law of Simultaneous Mining Working Faces in close Distance Seam Group of Dongsheng Coalfield Study on the Abutment Pressure and Advanced Support of Driving Roadway along Goaf of Isolated Mining Face Experimental Study of Fill Body Non-Uniformity for Cut-and-Fill Mining Simulation and Analysis of Anti-Explosion Capability for Coal Mine Refuge Chamber The Study of Remaining Oil Distribution in Tazhong 4 Oilfield's TZ402CIII Oil Group Study of the Trellis Support of Working Face Roadway in Impact Coal Seam Study on the Mining Induced Stress of Hard Surrounding Rock under Dynamic Pressure Plugging Agent Type Selecting Methods for Channeling Reservoir Study on Deep Reduction of Oolitic Hematite Assisted with Microwave Radiation Study on Variation Regular Pattern of Development Indexes in Beierdong Block after Layer Recombination Evaluation on Shale Gas Potential in the Sheling Group Yitong Basin Finite Element Analysis and Optimization Design on Single Screw Pump of Offshore Petroleum Well Cementing LADS Device The Characterization of the Rock Microscopic Pore Structure before and after Strong Base ASP Flooding Discussion on Support Problems on Soft Rock Roadway Research on Rock Mechanics Characteristics of Mud Sandstone NanTun Formation of HaiLaEr Oilfield An Experimental Study on the Mechanical Properties of Cemented Rock-Tailings Fill Investigation on the Sintering Properties of Mullite Al2O3-70% Status Analysis of the Frozen Soil's Dynamics Parameter Study Studies about the Drained Creep Characteristic of Silt Soil on k0 Consolidation Characterization and Application of Super Clean Coal Study on Extractiing of Heme from Tilapias Blood by Enzymatic Method

「Nielsen BookData」 より

詳細情報

• NII書誌ID(NCID): BB17043519
• ISBN:
  • 9783038351214
• 出版国コード: sz
• タイトル言語コード: eng
• 本文言語コード: eng
• 出版地: Durnten-Zurich
• ページ数/冊数: 4 v. (2675 p.)
• 大きさ: 24 cm
• 親書誌ID:
  • BA24926058