Modern achievements and developments in manufacturing and industry : selected, peer reviewed papers from the International Conference on Recent Advances in Mechanical Engineering and Interdisciplinary Developments (ICRAMID 2014), March 7-8, 2014, Tamis Nadu, India
著者
書誌事項
Modern achievements and developments in manufacturing and industry : selected, peer reviewed papers from the International Conference on Recent Advances in Mechanical Engineering and Interdisciplinary Developments (ICRAMID 2014), March 7-8, 2014, Tamis Nadu, India
(Advanced materials research, v. 984-985)
Trans Tech Publications, c2014
- : [set]
- Part 1
- Part 2
大学図書館所蔵 件 / 全1件
-
該当する所蔵館はありません
- すべての絞り込み条件を解除する
注記
Includes bibliographical references and indexes
内容説明・目次
内容説明
Collection of selected, peer reviewed papers from the International Conference on Recent Advances in Mechanical Engineering and Interdisciplinary Developments (ICRAMID 2014), March 7-8, 2014, Tamis Nadu, India.
The 200 papers are grouped as follows:
Chapter 1: Modern Production Technologies and Manufacturing Technological Processes,
Chapter 2: Composite Materials,
Chapter 3: Modeling, Analysis and Simulation of Manufacturing and Industry Processes,
Chapter 4: Nanoengineering, Coatings Engineering and Applications,
Chapter 5: Corrosion and Wear Engineering,
Chapter 6: Advances in Welding Technologies,
Chapter 7: Developments in Automobile,
Chapter 8: Influence of Materials in Civil Engineering,
Chapter 9: Hybrid / Wind / Solar / Geo Thermal Energies and Power Systems,
Chapter 10: Biodiesel and Other Alternative Fuels and Technologies,
Chapter 11: Modelling, Optimization, Analysis and Simulation of I.C. / S.I / C.I Engines,
Chapter 12: Power Engineering, Power Electronics Engineering and Applications, Sensors and Control Engineering,
Chapter 13: Heat and Thermal Engineering, Air and Flow Dynamics and Engineering,
Chapter 14: Technologies for Robotics Systems and Automation,
Chapter 15: Algorithms Methods, Particle Swarm Optimization Applications,
Chapter 16: Information Technologies and Services, Neural Network,
Chapter 17: Recognition and Image Processing Techologies, Wireless Applications
目次
Preface and Editors
Chapter 1: Modern Production Technologies and Manufacturing Technological Processes
Experimental Investigation on Effect of High Pressure Coolant with Various Cutting Speed and Feed on Surface Roughness in Cylindrical Turning of AISI 1060 Steel Using Carbide Insert
A Mathematical Model for Wire Cut Electrical Discharge Machine Parameters Using Artificial Neural Network
Performance Profiling of Nanoparticulate Graphite Powder as Lubricant in the Machining of AISI 1040 Steel under Variable Machining Conditions
Acoustic Emission Signal Analysis for Tool Condition Monitoring in Microendmilling of Aluminium Alloy
Acoustic Emission Signal Analysis for Tool Condition Monitoring in Microturning of Titanium Alloy
Parametric Study along with Selection of Optimal Solutions in Wire Cut Machining of Titanium (Gr2)
Surface Roughness Optimization in Machining of Titanium Alloy (Ti-6Al-4V)
Finite Element Analysis of Material Removal Rate in Electrical Discharge Machining Process and its Comparison with Experiments
Optimization of Process Parameters of Titanium Alloy Grade 5 Using CNC Wire-Cut EDM
Influence of Process Parameters on Limiting Drawing Ratio of IS513 CR3 Grade Steel Sheet during Warm Deep Drawing
Hole Accuracy during Deep Hole Drilling for Hydraulic Cylinder Application
A Study on the Die-Sinking Micro-Electrical Discharge Machining of EN-24 Die Steel Using Various Electrode Materials
A Review on Signal Acquisition Methods for Tool Wear Monitoring in Turning Process
An Expatiate View of Solid Clay Based Desiccant Mould with Varying Void Fraction on Absorption
Influence of Cutting Speed and Offset Distance over Cutting Tool Vibration in Multi-Tool Turning Process
Minimizing Material Processing Time and Idle Time of a Critical Machine in a Flow Shop
A Comprehensive Survey of Flexible Manufacturing System Scheduling Using Petri Nets
Optimization of Surface Grinding Process Parameters for Minimum Surface Roughness in AISI 1080 Using Response Surface Methodology
Development and Characterization of AZ31B Mg Alloy Using Powder Metallurgy Technique Followed by Hot Extrusion
Optimization of Process Parameters of Zirconia Reinforced Alumina by Powder Forming Process Using Response Surface Method
Experimental Investigation of Buckling Length of CFS Lipped Channel Beams under Restrained Boundary Conditions
Experimental Investigation and Analysis on Hard Turning of AISI D2 Steel Using Coated Carbide Insert
Advanced Oxidation Process by Electro-Fenton Reagent
Chapter 2: Composite Materials
Flexural Performance of Hybrid-Rubberized Composite Slabs Using Finite Element Method
Effect of Lamina Fiber Orientation on Tensile and Free Vibration (by Impulse Hammer Technique) Properties of Coconut Sheath/Sansevieria cylindrica Hybrid Composites
Effect of Fiber Loading and Surface Treatment on the Mechanical Properties of Coconut Sheath Fiber Reinforced Epoxy Composites
Delamination Analysis in Drilling of Coir-Polyester Composites Using Design of Experiments
Microstructural Studies of Aluminium 7075-Silicon Carbide-Alumina Metal Matrix Composite
Tribological and Mechanical Behavior Study of Al6061-TiB2 Metal Matrix Composites Using Stir Casting
Experimental Study on Edge Trimming of Unidirectional CFRP Composites
Statistical Analysis and Fractography Study of Tensile Behavior in Bio Particulated Coir-Vinyl Ester Composites
Dry Sliding Wear Behavior of Silicon Carbide Particulate Reinforced AA6061 Aluminum Alloy Composites Produced via Stir Casting
Experimental Study and Optimization of Wire-Electrical Discharge Machined WC-15%Co Metal Matrix Composites
An Experimental Evaluation of Static Strength and Fatigue Life on Composite Patch Repaired AA2024-T4 Plate
Influence of Nickel Oxide Additive on the Properties of Sol-Gel Prepared Aluminum Borate Whisker
On the Relationship of Ni Volume Fraction in Polymer Matrix Composite to its Impact Property
The Experimental Investigation on Water Absorption Characteristics of Natural Fiber Composites
Design, Fabrication and Experimental Analysis of Pandanus Fibre Reinforced Polyester Composite
Investigation on Vibration Behaviour of Cantilever Type Glass/Carbon Hybrid Composite Beams at Higher Frequency Range Using Finite Element Method
Impact Behaviour Analysis of Sisal/Jute and Glass Fiber Reinforced Hybrid Composites
Experimental Investigation on Modal Response of Woven Fabric Carbon Composite Plate Reinforced with Particles of Micro Rubber Blended Epoxy Matrix under Free Vibration Condition
Synthesis of Al-Al3Ti In Situ Metal Matrix Composites by Salt Route and Evaluation of their Mechanical Properties
Synthesis and Mechanical Characterization of Sisal-Epoxy and Hybrid-Epoxy Composites in Comparison with Conventional Fiber Glass-Epoxy Composite
Optimization of Casting Parameters on Al/RHA Composite Using Taguchi Method
Optimization of Process Parameters during Milling of Friction Stir Processed GFRP Composites
Wear Studies on SiC and Fly Ash Reinforced Copper Based Composites by Grey Relational Analysis
Synthesis and Characterization of TiO2 Dispersed Al 7075 Micro- and Nanocomposite
Studies on Dry Sliding Wear Characteristics of Ceramic Al2O3 Particulate Reinforced 6061Al Matrix Composites
Material Characterization Study on Aluminium Metal Matrix Composites by Enhanced Stir Casting Method
Tribological Charecterization of Carbon Epoxy Composite Materials with Particulate Silane Treated SiC Fillers
Multi-Criteria Optimization Using Grey Relational Analysis in Drilling of Glass/Epoxy Polymeric Composites
Tensile Property Evaluation of Carbon Fiber Reinforced Aluminium Sandwich Composites
Influence of Squeeze Pressure on the Mechanical Properties of Squeeze Cast Aluminium Alloy AA6061
Influence of Process Parameters on Delamination of Drilling of (GF/PC) Glass Fiber Reinforced Polycarbonate Matrix Composites
Preparation and Characterization of TiO2 Particulate Filled Polyester Based Glass Fiber Reinforced Polymer Composite
Static and Dynamic Analysis of Aluminium Composite in Wing Section Using ANSYS
Hydrotropic Extraction of Xanthones from Mangosteen Pericarp
Experimental Studies on Optimization of WEDMed Tungsten-Carbide Metal Matrix Composite
Development of AA6061/SiCp Metal Matrix Composites by Conventional Stir Casting and Ultrasonic Assisted Casting Routes - A Comparative Study
RETRACTED: Workability Behavior of Aluminium Hybrid Composites (P/M)
Thermal Stress and Buckling Analysis of Functionally Graded Plates
Study of Mechanical Behaviour of Stir Cast Aluminium Based Composite Reinforced with Mechanically Ball Milled TiB2 Nano Particles
Chapter 3: Modeling, Analysis and Simulation of Manufacturing and Industry Processes
Multi Objective Design Optimization of Two Bar Truss Using NSGA II and TOPSIS
Fuzzy Logic Modeling for Decision Making Processes Using MATLAB
The Finite Element Method: A Tool to Evaluate Shear Bond Strength of Dental Bracket
Static Analysis of Workpiece - Fixture Layout System for Drilling Operation Using RSM and ACA
An Evolutionary Hybrid Algorithm for Layout Planning in Flexible Manufacturing System
Structural Analysis on Swirling Grooved SCC Piston
Elasto-Plastic Stress Analysis of Thick Cylinders
Analysis of Polyurethane Filled Solid Tire
Chapter 4: Nanoengineering, Coatings Engineering and Applications
Experimental Investigations on the Effect of Flow Area of Nano Coated Catalytic Converter
Study on Influence of Zwitterionic Surfactant on the Surface Finish and Surface Morphology of Electroless Ni-B Coatings on Al 7075-T6 Alloy
Studies on Formability Behaviour of Aluminium Alloy Sheets with Ceramic Nanocoatings
Effect of Addition of Nano Zirconia in Ceramic Glazes
Performance of PVD Coated on High Speed Steel Cutting Tool in Industrial Applications
Characterization of Electroless Nickel Phosphorus Nylon 66 Composite Coating on Low Carbon Steel
Review on Nano Fabrication and Application
Electrodeposition of Nanostructured Ni Based Alloys/Composites - A Critical Analysis
Prediction of Best Combination of Process Parameters for Detonation Gun Coating Process through Taguchi Technique
Chapter 5: Corrosion and Wear Engineering
Improvement of Stress Corrosion Cracking (SCC) Resistance of a 7150 Al-Zn-Mg-Cu Alloy by Retrogression and Reageing (RRA) Treatment
Effect of Hardness on the Wear Behavior of Hybrid Metal Matrix Composites
Synthesis of Al7075 Alloy/Al2O3 Composite and Corrosion Study
Worn Surface Analysis of Hybrid Metal Matrix Composite
Dry Sliding Wear Behaviour of Al 7075 T6 Coated by Plasma Spray Process
Evaluation of Corrosion Behaviour for Aluminium Alloy 7075 in 5% NaCl Solution under Slightly Varying Temperature
Influence of Sensor Positioning in Tool Condition Monitoring of Drilling Process through Vibration Analysis
Chapter 6: Advances in Welding Technologies
DWT Based Automated Weld Pool Detection and Defect Characterisation from Weld Radiographs
Evaluation of Energy Model Using Hypergeometry in Friction Stir Welding
Effects of Tool Pin Profile and Tool Shoulder Diameter on the Tensile Behaviour of Friction Stir Welded Joints of Aluminium Alloys
Thermal Analysis on Joining of Dissimilar Metals by Friction Stud Welding
Mathematical Model to Predict Heat Flow in Underwater Friction Stud Welding
Mathematical Modeling of Friction Plug Welding with Preheating Effect
Effect of Process Parameters during Friction Stir Welding of Al 6063 Alloy
Developing a Mathematical Model to Predict Tensile Properties of Friction Welded AISI 1035 Grade Steel Rods
The Microhardness Analysis of Friction Welded AISI 52100 Grade Carbon Steel Joints
Effects of Porosity on Strength of Aluminum Alloy 2219
Chapter 7: Developments in Automobile
An Approach on Performance Comparison of Quarter Car Suspension System
Design and Analysis of Magneto-Rheological Fluid Brake (MRB)
Design and Development of a High Pressure Die Casting Technique for Manufacturing Heavy Vehicle Engine Components
Design and Performance Analysis on MR-Shock Absorber
Investigations on Vehicle Rollover Prevention Using Dead-Beat Controller
Design and Analysis of SUPRA AISI 1018 Carbon Steel Car Frame Using ANSYS
Chapter 8: Influence of Materials in Civil Engineering
Mechanical Properties and Stress-Strain Behaviour of Hybrid Fibre-Reinforced Self-Compacting Concrete
Behaviour and Strength of Innovative Steel Concrete Columns with SCC
Evaluation of Mechanical Properties of BAGcrete
Flexural Behavior of Beams Incorporating GGBS as Partial Replacement of Fine Aggregate in Concrete
Interface Friction between Glass Fibre Reinforced Polymer and Gravel Soil
Optimisation of Tunnel Lining
Chapter 9: Hybrid / Wind / Solar / Geo Thermal Energies and Power Systems
Hybrid Thermal Energy Based Cooling System for a Remote Seashore Villages
Application of Solar Thermal Energy Storage for Industrial Process Heating
Power Quality Improvement in Wind Energy Generation Using Fuzzy Logic Controller
Integrated Offshore Wind and Seashore Wave Farm Fed to a Power Grid Using a UPFC
A Novel Fused Converter for Hybrid Power Systems
A Study of CO2 Emission and Indian Wind Industries - Area for Improvement
Performance Comparison of GA and PSO on Wind and Thermal Generation Dispatch
Improved Output Voltage in Micro Wind Power Generator Fed Z Source Inverter Based System
New Construction Methodology - A Strategic Approach of Financial and Market Feasibility for Geothermal Cogeneration Plant
Nano Fluids for Improving Efficiency in Wind Turbine Cooling System
Modeling and Simulation of PMSG Based WECS
Experimental Analysis of a Flat Plate Solar Collector System for Small-Scale Desalination Applications
Design Parameters Optimization and Theoretical Performance Analysis of Linear Fresnel Reflector Solar Concentrator with Multi Tube Absorber
Hardware Implementation of Z-Source Inverter Based MPPT Scheme for Solar Power Conversion System
Chapter 10: Biodiesel and other Alternative Fuels and Technologies
Design and Development of Electronic Fuel Injection System for Vegetable Methyl Ester Operated DI CI Engine
Biofuel (Cooking Oil) Blends Contribution in DI Diesel Engine - Performance & Emission Study
Rubber Seed Kernel as a Substitute for Wood in a Biomass Gasifier - An Experimental Study
Effect of Compression Ratio on Diesel Engine Performance and Emission Fueled with Tamanu Oil Methyl Ester and its Blends
Experimental Evaluation of Performance and Emissions of CI Engine Using Cottonseed Biodiesel with N-Butonal as a Additive
Optimization of Performance Parameters of a CI Engine Fueled with Neem Biodiesel Using Taguchi Technique
Experimental Investigation on Combustion and Emission Characteristics of Modified Piston in an IDI Diesel Engine Fueled with Ethyl Alcohol
Experimental Investigation of Diesel - Ethanol Blend in DI Diesel Engine Using Preheating of Intake Air
Study on Performance & Emission Characteristic of CI Engine Using Biodiesel
Performance and Emission Evaluation of a Diesel Engine Fuelled with Cashew Nut Shell Oil Blends
Effect of Combustion Chamber Geometry on Performance and Emission Characteristics of a Diesel Engine Fueled with Mahua Biodiesel Blends
Performance Characteristics of Variable Compression Ratio Engine Using COME Biodiesel
Preparation, Characterization and Engine Performance Characteristics of Used Cooking Sunflower Oil Based Bio-Fuels for a Diesel Engine
Experimental Investigation on the Effects of Diethyl Ether Additive on Cashew Nut Shell Liquid Biodiesel
Experimental Study on Diesel Engine and Analysis the Spray Characteristics of Diesel and Biodiesel by Varying Injection Pressure
Review Study on Spray Cone Angle in Diesel Engine Fuelled with Biodiesel and its Derivatives
Chapter 11: Modelling, Optimization, Analysis and Simulation of I.C. / S.I / C.I Engines
Effect of Compression Ratio on Performance of a Four-Stroke Spark-Ignition Engine - A Theoretical and Experimental Study
Performance, Combustion and Emission Analysis for Various Combustion Chamber Geometry
Analysis of Incylinder Pressure and Temperature Variation in a Four-Stroke S. I. Engine Using Wiebe's Combustion Model
Experimental Evaluation of Injection Pressure for a Mahua Oil Methyl Ester (MOME) Fueled C.I. Engine
Steam Fuel System in Ramjet Engine
Virtual Instrumentation Based Analysis of Induction Motor
Chapter 12: Power Engineering, Power Electronics Engineering and Applications, Sensors and Control Engineering
Control of Grid Connected Inverter with PR Controller and LCL Filter for Interfacing Renewable Energy Sources
An Efficient Approach for Voltage Stability Improvement Based on Artificial Bee Colony Algorithm
Synchro Phasor Measurement Based Fault Analysis of a Parallel Transmission Line
The Path of the Smart Grid in India
Fault Analysis on Photo Voltaic Fed Grid Connected Systems
A Novel Low Cost Slope Transducer for Static and Dynamic Measurements
PIC Based Implementation of ZV ZCS Interleaved Boost Converter
State Space Averaged Modeling and Power Loss Computations for Fuel Cell Powered Four-Phase Interleaved Boost Converter
Simulation Analysis and Implementation of Two - Phase Interleaved Boost Converter with Ripple Steering for Power Factor Correction
Frequency Scaling Based Green Mobile Battery Charge Controller Sensor Design on FPGA
Geometric Effects on the Accuracy of Euler-Bernoulli Piezoelectric Smart Beam Finite Elements
A Novel Magneto-Fluorescent Biosensor for the Detection of Pathogens in Food
Relative Analysis of GaAs, InSb, InP Using QWFET
Mapping Based Energy Efficient Counter Design on FPGA
Chapter 13: Heat and Thermal Engineering, Air and Flow Dynamics and Engineering
Optimum Design of Shell and Tube Heat Exchanger Using Response Surface Methodology
Review on Heat Transfer Enhancement of Nanofluids - Engine Coolant
Enhancement of Flow Diffusion in a Centrifugal Compressor Stage with Backward Curved Impeller by Shroud Extension - A Numerical Study
Exergy Performance Assessment of a Residential Air Conditioner Working with R22 and R32/R125/R600a Mixture as an Alternative
Experimental Investigation of Heat Transfer of Single Jet Impingement on a Aluminium Block
Investigation of Heat Transfer Performance of Nanofluids on Conical Solar Collector under Dynamic Condition
Waste Heat Recovery Using Matrix Heat Exchanger from the Exhaust of an Automobile Engine for Heating Car's Passenger Cabin
Theoretical Study and Mathematical Modeling of Plate-Pin Fin Heat Exchanger for Solar Photovoltaic Cooling System
Performance Prediction of Pulse Tube Refrigerator Using Artificial Neural Network
Numerical Analysis to Study the Flow Pattern inside a Fin-Tube Heat Exchanger Navigation of a Mobile Robot
Thermal Presentation of Two-Phase Congested Thermosyphon in Submission of Determined Thermoelectric Dominance Producer by Means of Phase Change Material Thermal Storage
Optimization of MCHX Using CFD and Refrigeration Cycle Simulator
Environment Friendly Mixed Refrigerant to Replace R-134a in a VCR System with Exergy Analysis
Design and Analysis of Cooling Cabinet for Vaccine Storage
Effect of Header Design on Pressure Drop in Microchannel Heat Sink for MEMS Applications
Assessment of Air Quality in Commercial Places of Chennai through Air Quality Index
Analysis of the Effects of Using Different Nozzles and Angle of Attack in Miniature Commercial Aircraft with Vertical Lift Using CFD
Comparative Studies on Various Turbulent Models with Liquid Rocket Nozzle through Computational Tool
Numerical Simulation of Rocket Nozzle
Impact of Emissivity on the Hotspot Temperature for Condition Monitoring of Electrical Equipments in Closed Room
Chapter 14: Technologies for Robotics Systems and Automation
Design of MICS Band Low Power Transmitter for Implantable Medical Applications
Path Planning of Mobile Robot Agent Using Heuristic Based Integrated Hybrid Algorithm
Design and Development of Assistive Leg for Lower Limb Rehabilitation
Derivation of Forward and Inverse Kinematics of 8 - Degrees of Freedom Based Bio-Inspired Humanoid Robotic Arm
Chapter 15: Algorithms Methods, Particle Swarm Optimization Applications
EMD Algorithm for Robust Image Watermarking
A New Multi Objective Genetic Algorithm: Fitness Aggregated Genetic Algorithm (FAGA) for Vehicle Routing Problem
An Efficient Approach for Network Mobility Based on AES Algorithm
An Efficient Lossless Medical Image Compression Using Hybrid Algorithm
Low Power Devnagari Unicode Checker Design Using CGVS Approach
Power System Loadability Maximization by Optimal Placement of Multiple-Type FACTS Devices Using PSO Based GUI
Solution of Economic Dispatch Problems with Smooth and Non Smooth Cost Function Using Particle Swarm Optimization
Enhanced OPF for DG Penetrated Power System Network under Variable Load Conditions
Chapter 16: Information Technologies and Services, Neural Network
Integrating OTP Authentication Service in OpenStack
Managing Resources in Cloud: Chrome Extension to OpenStack
Neural Network Predictive Controller Based Nonlinearity Identification Case Study: Nonlinear Process Reactor - CSTR
Text Mining Approach for Discovering Useful Knowledge from Information Sources of E-Waste
Chapter 17: Recognition and Image Processing Technologies, Wireless Applications
Intruder Identification Using Footprint Recognition with PCA and SVM Classifiers
Image Inpainting Based on Fast Inpainting and Sparse Representation Method
Security Based Processed Video Distribution on Multi-Core System
An Intelligent and Efficient Wireless Classroom Management System
Wireless Image Transmission Based on Cognitive Radio for Robotic Communication
Contrast Enhanced for Microstructure of Steel Materials and Engine Components
「Nielsen BookData」 より