Residual stresses IX : selected, peer reviewed papers from the 9th European Conference on Residual Stresses (ECRS-9), July 7-10, 2014, Troyes, France
Author(s)
Bibliographic Information
Residual stresses IX : selected, peer reviewed papers from the 9th European Conference on Residual Stresses (ECRS-9), July 7-10, 2014, Troyes, France
（Advanced materials research, v. 996）
Trans Tech Publications, c2014
- : pbk
Available at / 1 libraries
-
No Libraries matched.
- Remove all filters.
Note
Includes bibliographical references and indexes
Other editors: G. Montay, B. Panicaud, D. Retraint and E. Rouhaud
Description and Table of Contents
Description
Collection of selected, peer reviewed papers from the 9th European Conference on Residual Stresses, ECRS-9, July 7-10, 2014, Troyes, France.
Volume is indexed by Thomson Reuters CPCI-S (WoS).
The 157 papers are grouped as follows:
Chapter I. Measurement Methods, I.1. Local Scale Measurements, I.2. Diffraction at Grain Scale and Multiscale Diffraction, I.3. Diffraction: Gradients and Instrumental Developments, I.4. Mechanical Relaxation Methods, I.5. Acoustics and Electromagnetics Methods,
Chapter II. Manufacturing and Materials Processing, II.1. Welding, II.2. Heat Treatment and Phase Transformation, II.3. Machining and Cold Work,
Chapter III. Materials and Structures, III.1. Fatigue and Fracture, III.2. Films, Coatings and Oxides, III.3. Composites and Nano/Micro Structures
Table of Contents
Preface, Committees and Sponsors
Chapter I. Measurement Methods
I.1. Local Scale Measurements
Strain Measurement with Nanometre Resolution by Transmission Electron Microscopy
Intragranular Residual Stress Evaluation Using the Semi-Destructive FIB-DIC Ring-Core Drilling Method
Tailored Mechanical Properties and Residual Stresses of a-C:H:W Coatings
Residual Stress State in Oxide Dispersive Steel due to Irradiation by Swift Heavy Ions
Study of Microstrain and Stress in Non-Planar Palladium Membranes for Hydrogen Separation
Relationship between Dislocation Density and Macro Strain of High-Heat-Load Materials
X-Ray Line Profile Study on Shot/Laser-Peened Stainless Steel
I.2. Diffraction at Grain Scale and Multiscale Diffraction
Local Stress Analysis in an SMA during Stress-Induced Martensitic Transformation by Kossel Microdiffraction
A Profile-Based Method of Determining Intragranular Strains Using Kossel Diffraction Patterns
Matrix Method for X-Ray Stress Measurement in Single Crystals, and the Rational Planning of the Measurements
Measurement of Complementary Strain Fields at the Grain Scale
Impact of Shot-Peening on a Single Crystal Nickel-Based Superalloy
Evaluation of Welding Residual Stresses Using Diffraction Spot Trace Method
Accounting for a Distribution of Morphologies and Orientations on Stresses Analysis by X-Ray and Neutron Diffraction: Normalized Self-Consistent Modeling
Effect of Interlamellar Spacing on the Monotonic Behavior of C70 Pearlitic Steel
Experimental and Numerical Analysis of Mechanical Behaviour of AISI 316L Austenitic Stainless Steel: Two Level Homogenization - Neutron Diffraction
Influence of Morphological Texture on Stresses Analysis by X-Ray and Neutron Diffraction: Accounting for Extreme Morphologies
Modeling Methodology for Stress Determination by XRD in Polycrystalline Materials
New Modelling Approach for Micromechanical Modelling of the Elastoplastic Behaviour
Study of Mechanical Behaviour of Polycrystalline Materials at the Mesoscale Using High Energy X-Ray Diffraction
Distribution of Residual Deformation Effects in Shell Tubes from Ferritic-Martensitic Steels
Residual Stress Tensor Distributions in Cracked Austenitic Stainless Steel Measured by Two-Dimensional X-Ray Diffraction Method
Microscopic Stress and Strain Evolved in a Twinning-Induced Plasticity Fe-Mn-C Steel
I.3. Diffraction: Gradients and Instrumental Developments
Effects of Misalignment of Parallel Beam Optics on Thin Film Stress Analysis
New Developments of Multireflection Grazing Incidence Diffraction
Determination of Stress Profiles in Expanded Austenite by Combining Successive Layer Removal and GI-XRD
Stress Gradient Analysis by Noncomplanar x-Ray Diffraction and Corresponding Refraction Correction
Spatial Convolution of a Stress Field Analyzed by X-Ray Diffraction
Influence of Layer Removal Methods in Residual Stress Profiling of a Shot Peened Steel Using X-Ray Diffraction
Material Removal, Correction and Laboratory X-Ray Diffraction
Looking Towards the Future of Strain Scanning Using Neutron Diffraction
Energy-Dispersive Residual Stress Analysis under Laboratory Conditions: Concept for a New Type of Diffractometer
Optimizing Experiment Performance by Realistic Sample Simulations
MYTHEN Detector - Perspectives in Residual Stress Measurements
Gamma Profile Analysis for Stress, Texture and Grain Size
About Error Calculation in X-Ray Stress Measurement
External Reference Samples for Residual Stress Analysis by X-Ray Diffraction
X-Ray Optics and Precision Requirements for Residual Stress Analyses with High Spatial Resolution
I.4. Mechanical Relaxation Methods
Beyond the Streetlight Effect: A United Future for Relaxation and Diffraction Methods for Residual Stress Measurement
Numerical Reconstruction of Residual Stress Fields from Limited Measurements
Plasticity and Stress Heterogeneity Influence on Mechanical Stress Relaxation Residual Stress Measurements
Residual Stress Measurement with Laser-Optical and Mechanical Methods
Application of the Incremental Hole-Drilling Method for the Determination of Residual Stresses in Glass-Fiber Reinforced Composites
Assessing Shot-Peening Residual Stresses by Using the Incremental Hole-Drilling Technique and Laser Interferometry (DSPI)
Combining XRD with Hole-Drilling Method in Residual Stress Gradient Analysis of Laser Hardened C45 Steel
Incremental Hole-Drilling Method Vs. Thin Components: A Simple Correction Approach
Influence of Gradients in the Elastic Anisotropy on the Reliability of Residual Stresses Determined by the Hole Drilling Method
Residual Stress Measurement on Large Shafts
Residual Stress Measurement Using the Hole Drilling Technique on Components outside the ASTM E837 Standard
Investigation of Influence Factors on Residual Stress Determination within Coated Surfaces in Consideration of the Differential and Integral Method
A Measuring and Evaluation Program for the Application of the Ring-Core or Hole-Drilling Method
Four-Point Bending Tests to Study the So-Called Plasticity Effect on the Residual Stress Results Determined by the Hole-Drilling and Ring-Core Methods
Estimation of Residual Stress Field Uniformity when Using the Ring-Core Method
Integral Method Coefficients and Regularization Procedure for the Ring-Core Residual Stress Measurement Technique
Plasticity in the Contour Method of Residual Stress Measurement
Residual Stress Measurement Methods Comparison in High-Strength Steel for Naval Application
Residual Stress Measurements on a Metal Matrix Composite Using the Contour Method with Brittle Fracture
Improvement to Stress Calculation Model of LRM in Thick Plate
Stoney Formula: Investigation of Curvature Measurements by Optical Profilometer
Characterization of Residual Stresses and Accumulated Plastic Strain Induced by Shot Peening through Simulation of Instrumented Indentation
I.5. Acoustics and Electromagnetics Methods
Characterisation of In-Depth Stress State by Magnetic Barkhausen Noise on Machined Steel Acquiring Different Frequency Bands
Residual Stress Measurement of Shot-Peened Steel Rings by Barkhausen Noise, ESPI Hole-Drilling and X-Ray Diffraction
Application of Local Current Pulses for Determination and Control of Residual Stresses
Characterization of Micrometric and Localised Residual Stresses on Amorphous Materials Using Dispersion of Surface Acoustic Waves
Flexible Head, Designed for Measuring Residual Stress along Variable Curves Using Ultra-Sonic Tranducers
Identification of Inhomogeneous Residual Stress State in Elastic Cylinder within the Framework of Plane Strain
Nondestructive Identification of Inhomogeneous Residual Stress State in Deformable Bodies on the Basis of the Acoustic Sounding Method
Chapter II. Manufacturing and Materials Processing
II.1. Welding
In Situ Observation of Stress Accumulation during Sub-Merged Arc Welding
Neutron Diffraction Strain Measurement during TIG Welding
Stress Measurement at Loaded Aluminium Welds Using Diffraction Methods
Neutron and X-Ray Diffraction Residual Stress Measurements in Aluminium Alloys MIG Welded T-Joints after Friction Stir Processing
The Effect of Specimen Size on Residual Stresses in Friction Stir Welded Aluminum Components
Welding Induced Residual Stresses in Explosion Cladded AL-6XN Superaustenitic Stainless Steel and ASME SA516-70 Steel Composite Plates
Welding Residual Stress Distribution of Quenched and Tempered and Thermo-Mechanically Hot Rolled High Strength Steels
Influence of Beam Speed on Residual Stresses in the Vicinity of Laser Welds
Evaluation of Weld Filler Alloying Concepts for Residual Stress Engineering by Means of Neutron and X-Ray Diffraction
Influence of Heat Control on Welding Stresses in Multilayer-Component Welds of High-Strength Steel S960QL
Investigating the Effects of Process Variables on the Residual Stresses of Weld and Laser Cladding
Residual Stresses in Multi-Pass Butt-Welded Tubular Joints
Microstructure and Residual Stress Analysis of Explosion Cladded Inconel 625 and ASME SA516-70 Carbon Steel Bimetal Plates
Residual Stresses of Explosion Cladded Composite Plates of ZERON 100 Superduplex Stainless Steel and ASTM SA516-70 Carbon Steel
Influence of Welding Defects on Residual Stresses: Numerical Study
The Influence of Austenite Grain Size during Welding Simulations of Ferritic Steels
Welding Simulation Used in the Design of Metallic Armor Systems
II.2. Heat Treatment and Phase Transformation
Investigation of Triaxial Stress State in Retained Austenite during Quenching of a Low Alloy Steel by In Situ X-Ray Diffraction
Analysis of Quenching and Stretching Processes of Aluminum Alloy Thick Plates
Residual Stress Distribution Caused by Laser Hardening and Conventional Quenching in Plain Carbon Steel
Evolution of Residual Stresses during Short Time Nitriding of 33CrMoV12-9 Steel Grade
Investigations of Residual Stress Distributions in Retained Austenite and Martensite after Carbonitriding of a Low Alloy Steel
Estimation of Cross-Sectional Residual Stress Distributionon Hardened Layer of Carburized Chromium-Molybdenum Steel by Electron Backscattering Diffraction Method
Effect of Preloading on Local Residual Stresses Induced by Laser Surface Hardening of Steel
Microstructure and Residual Stresses of Laser Structured Surfaces
Analysis of Thermal Effect on Residual Stresses of Broached Inconel 718
Study of Residual Stresses in Bimetallic Work Rolls
Analysis of Residual Stress in Stress Harps of Grey Iron by Experiment and Simulation
Residual Stresses of the As-Cast Mg-xCa Alloys with Hot Sprues by Neutron Diffraction
II.3. Machining and Cold Work
Local Global Method for the Prediction of Surface Residual Stresses in 3D Turning
Effect of Built-Up Edge Formation on Residual Stresses Induced by Dry Cutting of Normalized Steel
Influence of Vibration and Heat Treatment on Residual Stress of a Machined 12%Cr-Steel
Measurement of Pre-Self-Balanced Surface Residual Stresses Induced by Milling in Titanium Alloys and the FEM Validation
Modelling Machining-Induced Residual Stresses after Laser-Assisted Turning of Steels
Numerical Assessment of Residual Stress Induced by Machining of Aluminum Alloy
Predicting the Effects of Grain Size on Machining-Induced Residual Stresses in Steels
Prediction and Measurement of Machining Distortion in Aluminium Alloy 7085
Real Structure of Milled Inconel 738LC Turbine Blades
Residual Stresses in Different Heat Treated Workpieces after Turning
Residual Stresses Induced by Dry and Cryogenic Cooling during Machining of AZ31B Magnesium Alloy
Residual Stress Evolution during the Manufacturing Process of Bearing Rings
Characterisation of Residual Stress due to Fillet Rolling on Bolts Made of a Nickel Base Superalloy
Effect of Different Manufacturing Process Steps on the Final Residual Stress Depth Profile along the Process Chain of Autofrettaged Thick-Walled-Cylinders
Effect of Thermal Residual Stresses on Bonded Structures Containing Cold Expanded and Bolted Holes
Modification of Stress and Texture Distributions in Asymmetrically Rolled Titanium
High Pressure Interpass Rolling of Wire + Arc Additively Manufactured Titanium Components
The Role of Residual Elastic Stress in Shrinkage of Cold-Pressed and Sintered Fuel Tablets
Modeling of Stress and Strain Fields Induced during the Smart-Cut Process on Silicone - Influence of Different Couplings for Diffusion of Hydrogen at a Microscopic Scale
Chapter III. Materials and Structures
III.1. Fatigue and Fracture
Effect of Surface Properties on the Fatigue Life of Manufactured Parts: Experimental Analysis and Multi-Axial Criteria
The Concept of Local Fatigue Strength Extended by Statistical Approaches to Assess Manufacturing Influences such as Residual Stresses
Stress Relaxation in Shot-Peened Geometric Features Subjected to Fatigue: Experiments and Modelling
Effect of Ultrasonic Impact Treatment (UIT) on Fatigue Strength of Welded Joints
Prediction of Cyclic Residual Stress Relaxation by Modeling Approach
Residual Stress Gradients in AISI 9254 Steel Springs Submitted to Shot Peening and Heat Treatment for Increased Fatigue Resistance
Residual Stresses in Ultrasonically Peened Fillet Welded Joints
Understanding the Mechanisms Responsible for the Beneficial Effect of Hammer Peening in Welded Structure under Fatigue Loading
Influence of Tempering Conditions on Shot-Peened Tool Steel Components In-Depth Residual Stress Profiles
Fatigue Crack Growth in Laser Shock Peened Thin Metallic Panels
X-Ray Diffraction Residual Stress Measurements for Assessment of Rolling Contact Fatigue Behaviour of Railway Steels
Numerical Investigation of Welding Residual Stress Field and its Behaviour under Multiaxial Loading in Tubular Joints
Effects of Fatigue on the Integrity of a Friction Stir Welded Lap Joint Containing Residual Stresses
On Welding Residual Stresses Near Fatigue Crack Tips
Process Induced Residual Stress Effect on Fatigue Lifetime of Automotive Steel Components
Residual Stresses in Large Scale Structures Welded at Low Ambient Temperatures
The Effect of Specimen Dimension on Residual Stress Relaxation of the Weldments
Determination of the Possible Causes of Cracks in Pins of Quick Operating Valves in Hydroelectric Power Plant
III.2. Films, Coatings and Oxides
On-Chip MEMS-Based Internal Stress Actuated Structures for the Mechanical Testing of Freestanding Thin Film Materials
Influence of Xe Ion-Bombardment on the Substrate Microstructure and the Residual Stresses of Tin Coatings Deposited by Plasma Reactive Sputtering onto AISI 4140 Steel
Investigations on Thermal Stresses of a Graded Ti(C,N) Coating Deposited on WC-Co Hardmetal
Microstructure, Stress and Texture in Sputter Deposited TiN Thin Films: Effect of Substrate Bias
Phase Transformation in Ultra-Thin Films
Relaxation of Residual Stresses in Brush-Plated Gold and Silver Coatings on Copper and on Brass Substrates
Stress Development and Adhesion in Hydrogenated Nano-Columnar Pd and Pd/Ti Ultra-Thin Films
Time-Resolved X-Ray Stress Analysis in Multilayered Thin Films during Continuous Loading: Use of 2D Remote Detection
Structure-Mechanical Property Relationship in Hot-Dip Galvanized S355k2+N Steel Plates
Determination of Residual Stress Fields in a Thermally Grown Oxide under Thermal Cycling Loadings, Using XRD and Raman Spectroscopy - Correlations with Microstructural States
Determination of Stress Fields and Identification of Thermomechanical Parameters in a Thermally Grown Oxide under Thermal Cycling Loadings, Using Advanced Models
Influence of Interlayer Macrostress on Oxidation of Shell Tubes from Zr-Based Alloys
Influence of Surface Mechanical Attrition Treatment (SMAT) on Oxidation Behavior of 316L Stainless Steel at 650 DegreesC
Influence of the Residual Stresses Induced by Shot-Peening on the Oxidation of Zr Plates
Residual Stress Study in Oxide Scale Obtained on High Temperature Oxidation of AISI 430 Stainless Steel
Microstresses in ZrO2 Layer and Lateral Cracking
Microstrain and Residual Stress in Thin-Films Made from Silver Nanoparticles Deposited by Inkjet-Printing Technology
III.3. Composites and Nano/Micro Structures
Microstructural Evolution and Strain Development in Metal Matrix Composites
Internal Stresses in Metal Matrix Composites in Relation with Matrix Phase Transformations
Residual Stress Evaluation of Short-Fiber Reinforced Plastics by X-Ray Diffraction
Influence of Hydrothermal Ageing on the Residual Stresses and Mechanical Behavior of Carbon/Epoxy Composite Laminates
Comparison between Conventional Shot Peening (SP) and Surface Mechanical Attrition Treatment (SMAT) on a Titanium Alloy
Non-Destructive Residual Stress Investigations of Natural Polycrystalline Diamonds
Investigation of TSV Induced Thermo-Mechanical Stress: Implementation of Piezoresistive Sensors and Correlation with Simulation
by "Nielsen BookData"