Advanced materials and technologies : selected, peer reviewed papers from the 4th International Conference on Advanced Engineering Materials and Technology (AEMT 2014), June 14-15, 2014, Xiamen, China
著者
書誌事項
Advanced materials and technologies : selected, peer reviewed papers from the 4th International Conference on Advanced Engineering Materials and Technology (AEMT 2014), June 14-15, 2014, Xiamen, China
（Advanced materials research, v. 1004-1005）
Trans Tech Publications, c2014
- : [set]
- Part 1
- Part 2
大学図書館所蔵 件 / 全1件
-
該当する所蔵館はありません
- すべての絞り込み条件を解除する
注記
Includes bibliographical references and indexes
内容説明・目次
内容説明
Collection of selected, peer reviewed papers from the the 4th International Conference on Advanced Engineering Materials and Technology (AEMT 2014), June 14-15, 2014, Xiamen, China.
The 323 papers are grouped as follows:
Chapter 1: Nano Materials Science and Technology,
Chapter 2: Metals and Alloys,
Chapter 3: Steel Materials and Applications,
Chapter 4: Resin, Rubber and Polymer Materials,
Chapter 5: Optical/Electrical/Magnetic Materials and Technology,
Chapter 6: Ceramic Materials and Technologies,
Chapter 7: Composite Research and Applications,
Chapter 8: Fiber Materials,
Chapter 9: Chemical and Energy Materials and Technologies,
Chapter 10: Films Materials, Surface and Coating Research,
Chapter 11: Biomaterials and Applied Research,
Chapter 12: Environmental-Friendly Materials and Green Technologies,
Chapter 13: Materials Processing, Testing and Monitoring Technologies,
Chapter 14: Applied Mechanics, Building Materials and Construction Engineering
目次
Preface and Conference Organization
Chapter 1: Nano Materials Science and Technology
Grain Boundary Internal Friction Peak in Nanocrystalline Aluminum Studied by Continuously Changing-Temperature
Synthesis of Dendritic Silver Nanostructures on Al Foil by Galvanic Displacement for Catalytic Degradation of Methylene Blue
Synthesis of Porous CeO2 Nanostructures Using Cotton Fibers as Biomaterial Template
Effect of Feeding Rate on Properties of Cu-Ag Alloy Nanopowders
Morphological Characteristics of W-Nanowires after Selective Etching
Nanoscience: The Scale of Latvia
Preparation of Conductive Ink with Silver Nanoparticles and Application in Transparent Conductive Films
Shape-Controlled Synthesis of Ag Nanocubes with Uniform Size
Recent Simulation Study on Precise Positioning of Carbon Nanotubes by Dielectrophoresis
Synthesis of Hollow Ba0.7Sr0.3TiO3 Nanocubes by Using Molten Hydrated Salt as a Solvent
Preparation and Modification of Nanometer TiO2 with High Reflectivity
Self-Assembly of Gold Nanoparticle Arrays with Anodic Aluminum Oxide Template
Research on the Controllable Preparation of Silver Nanowires in Conductive Adhesives
Preparation of Size Controllable BaTiO3 Nanoparticles in Microemulsion at Low Temperature
Synthesis of Titanium Carbonitride Powders by Reactive Ball Milling of Titanium, Graphite and Urea
Synthesis and Characterization of Eu3+-Doped Transparent Glass-Ceramics Containing Nanocrystalline AlNbO4
Retardant Properties of Nanosilica/PTFE Nanoparticals-Reinforced Polypropylene
Performance Study of Ti-Pillared Montmorillonite Nanocomposites
A Study on a Functional Emulsion Coating and Infrared Laser-Induced Imaging Performance
Effect of Chemical Treatment on Multi-Walled Carbon Nanotubes/Epoxy Composite
Preparation of Nano-Composite Photocatalyst to Remove TOC in Power Plant Boiler Make-Up Water
Synthesis and Magnetic Properties of LaMnO3/ -Al2O3 Magnetic Nanocomposites
Chapter 2: Metals and Alloys
Corrosion Behaviour of AZ91DSm1.0 with Different Preparation Methods
Effect of the Content of Ca on the Microstructure of Magnesium Alloys
Effects of Pulsed Magnetic Field on the Microstructure and Mechanical Properties of Mg97Y2Zn1 Alloy
Impact Strength Behavior and Fracture Morphologies of Tungsten Alloy with High Deformation
Microstructure and Property Analysis of Furnace Pipe Used over a Design Cycle
The Research Progress of Aluminum Alloy Corrosion in Marine Atmosphere
Effect of Environment on Fatigue Crack Propagation Behavior of an Al-Cu-Mg Aluminum Alloy
Microstructure Evolution and Mechanical Properties of an Al-Cu-Mg Alloy at Elevated Temperature
Microstructure Evolution of Zn-Al Cladding Fabricated on AZ31 Magnesium Alloy
Effects of Specimen Diameter on Microstructure and Microhardness of Hot Extruded AZ31B Magnesium Alloy
Influence of Pre-Deformation Temperature on Mechanics Performance of NiTiNb Shape Memory Alloy: First-Principles Calculation
Microstructure Characteristic of AZ31/7005 Joints by GTAW with Filler Wire of Mg-Al Alloy
Effect of RE on Microstructure and Properties of AM60 Magnesium Alloy
Chapter 3: Steel Materials and Applications
The Effect of Cooling Rate and Overaging Time on the Mechanical Properties of a Ultra-Low Carbon Auto Steel
High Silicon Addition in 780 MPa Cold-Rolled Dual Phase Steel for Carbon Reduction and Plastic Reinforce
Research of Microstructure and Mechanical Properties of the Cold Rolled Hot-Dip Galvanizing DP450 Steel with Low Carbon and High Chromium
Study of Corrosion Mechanism of Al2O3-MgO Refractories and its Effect on Cleanness of Molten Steel
Effect of Retained Austenite Stability on Mechanical Properties of Bainitic Rail Steel
Enhanced Mechanical Properties of a 0.22C-Mn-Si-Cr Low Alloyed Steel Treated by ART and Q&P Processes
Experimental Researches on Nonlinear Strain Paths Forming for Dual Phase Steel
Investigation on the Austenitic Reverse Transformation of 0.2C-3Mn-1.7Si Steel with an Ultra-Slow Heating Rate
Analysis of Orange Peel Defects on Hot-Dip Galvanized High Strength Low Alloy Steel
Deep Denitrogenization Technology of 23Co-Ni Steel in Vacuum Induction Melting Furnace
Effect of Mn Addition on Mechanical Property and Corrosion Behavior in Hot Rolled 19 % Cr Duplex Stainless Steel
Simulation of Martensitic Transformation of High Strength and Elongation Steel by Cellular Automaton
Investigation of an Isatin Schiff Base as Corrosion Inhibitor in NaCl Solution
Chapter 4: Resin, Rubber and Polymer Materials
Effect of Types of Antioxidants on Thermal and Thermo-Oxidative Degradation of Epoxidized Natural Rubber
Thermal Safety Study of One New-Type DB Propellant
Application of a Novel DOPO-Based Polymeric Phosphate Flame Retardant for Polycarbonate/Acrylonitrile-butadiene-styrene Alloy
Energy Method in the Calculation Stability of Compressed Polymer Rods Considering Creep
Study on Low Temperature Stripping Material Based on the Modified Acrylate Polymer
Effect of Polyolefin on Color Difference of Ethylene Propylene Diene Rubber/Aluminium Oxide Composites
The Preparation of Higher Ordered Poly(3-hexylthiophene) by Oxidative Method
Study on Synthesis of Polyether-Modified Polysiloxane
Preparation and Study of P(Styrene-Divinylbenzene)/Polyacrylamide Particles
Thermal and Oxidative Stability Thermosets Derived from Hybrids of Cyclosilazanes and Silicon-Containing Polyarylacetylene
The VO Defect in Electron Irradiated Czochralski Silicon
Study on the Cell Structure and Mechanical Properties of Methyl Vinyl Silicone Rubber Foam Materials
Facile Process for Preparation of PS/PtOEP Composite Microspheres and their Oxygen Sensing Properties
Study on Synthesis of Starch Based Polymer Microspheres and Adsorption Behavior for Lead Ions
A High-Efficiency Inflame Retardant Modification of Poly(Ethylene Terephthalate)(PET) Fabric
Chapter 5: Optical/Electrical/Magnetic Materials and Technology
KDP Crystals Grown in Defined Crystallographic Direction
Experimental Study of the Strain in Different Structures of the InGaN/GaN and InGaN/AlInGaN Quantum Well
Preparation and Optical Properties of Er3+-Yb3+ Co-Doped ZnO-B2O3- SiO2 -TiO2Transparent Glass-Ceramics
Small Angle Neutron Scattering Study of Ferritic ODS Alloys
Synthesis and Luminescent Properties of Blue-Emitting Hydrotalcite-Like Compound for NUV Light-Emitting Diodes
Synthesis and Luminescent Properties of Monodisperse Spherical SiO2/Ca10(PO4)6(OH)2: Eu3+ Particles with Core-Shell Structure
The Synthesis of the Novel Vacuum Ultraviolet Double Frequency Crystal KBe2BO3F2 (KBBF)
Yellow Luminescence Iridium Complex and its Composite with Polymers
Doping Strategies of Bi (Ti0.5Ni0.5)O3 for Increased Performance in BiFeO3
Photoelectric Properties of High Power GaN Based LEDs on Cu/Cr Composite Substrates
Preparation of Sm2Fe17 Columnar Grains Ribbons by Rapid Quenching
The Effect of Li2O Content on the Electrochemical Performance of ( '')-Al2O3
Synthesis, Structure and Photocatalytic Property of [Ni(en)2]{[Ni(en)2]2[Mo8V8O40(VO4)]}[(NH2)2(C2H4)2NH]2*2H2O
Resistivity Characterization of Ti Based ATO and its Preparation
The Effect of Different Meshes on the AC Loss Calculation of HTS Conductors
Synthesis and Photoluminescence Properties of Monodisperse Spherical SiO2@Lu2O3: Eu3+ Particles with Core-Shell Structure
Improved Model of Middle Layer Used for Design of Piezoelectric Bimorph Actuator
Chapter 6: Ceramic Materials and Technologies
Effect of B4C-Si3N4 on Crystallization and Sintering of Fused Quartz Ceramic Material
Estimation of Water Desorption in Drying of Membrane Structure System
High Yield Polyborosilazane Precursor for SiBN Ceramics
Raman Spectra of SrTiO3 Prepared by Direct Current Arc Discharge Plasma Process
Simulation of the Electrical Properties of Semiconductive BaTiO3 Ceramic Varistors Using Continuum Theory
The Influence of Li on the Point Defect Structure of ZnO Varistor Ceramics
Influences of Different Calcining Method on the Characteristics of 0.65(K0.5Bi0.5TiO3)-0.35BaTiO3 Ceramics
Error Analysis of Ceramic Materials Fracture Toughness Measured by the Single Edge Notched Beam Method
Non-Isothermal Method for Charactering the Oxidation Resistance Property of SiAlON Materials
Chapter 7: Composite Research and Applications
Application of Lightweight Composite Materials in Heavy Roadway
Finite Element Analysis of the Tensile Properties of Composite Laminates with Open Holes
Numerical Simulation on Ballistic Performance of Wf/Metallic Glass Composite with Tungsten Fiber Spacing
Principal Component Analysis of Structure Model Indexes on Composite Friction Materials
Sound Absorption Property of Hydrogenated Carboxyl Nitrile Rubber/Seven Hole Polyester Fiber Composites
Statistical Classification Method of Structure Model on Compound Friction Materials
Stress Singularities near Interface Crack Tip for Mode II of Orthotropic Bi-Material
Decontamination Performance of ZnFe2O4/Expanded Graphite Composites
Research on Feasibility and Structural Design of Fiber Reinforced Composite Sluice Gate
Research on Rheological Behavior of Si3N4-SiC Composites by Gelcasting
Research on the Dynamic Buckling Characteristics of Carbon Fiber Composite Honeycomb Panel under Out-of-Plane Impact Load
Study of Wood Plastic Composites on Mechanical and Thermal Properties after Immersed into Water
Friction and Wear Performance of Ti-Al Matrix Composites under 650 DegreesC
Micro Crack Transverse Propagation Simulation of Carbon Fiber Reinforced Composites
The Influence of Carbonyl Nickel Content on Thermophysical Properties of Metal Polymer Materials Based on Aromatic Polyamide Phenylon
The Wearability of Soybean Protein/Poly (Ethylene Terephthalate) Composite Fabric
Research on Properties of Crosslinkable Polymer-Based Semi-Conductive Shielding Composites
A New Type of Llightweight Composite Bridge
Synthesis, Characterization and Thermooxidative Properties of Hybrid Block Poly(silane-b-arylacetylene)
Study of Preparing ''-Alumina by Solid-State Synthesis
Colorimetry of Ethylene Propylene Diene Rubber/Mica/Polyolefin Composites
Hydrothermal Synthesis and Structure Characterization of a Bi-Capped Keggin Heteropoly Molybdovanadated Derivative
Preparation and Properties of Polyethylene Glycol-Based Composite Phase Change Materials
Chapter 8: Fiber Materials
Application Research of High-Strength Needled Filter Bag with Sea-Island Superfine Fiber
Heat-Transfer Stability of Porous Fibrous Composition under Different Condition
The Comparison of Sound Absorption of Kapok-Based Fiber Nonwoven Fabrics
The Components and Activities of Flax-Degumming Enzymes Produced by Bacillus licheniformis HDYM-03
Study on Fiber Fineness of Comte De Paris Pineapple Leaf
Study on the Mechanical Property of CNTs/Silk Fibroin Composite Fiber
Chapter 9: Chemical and Energy Materials and Technologies
Optimum Process of Texturing on Silicon Solar Cell
Synthesis , Characterization and Photophysical Properties of a New Cui Complexe Contain Bis[2-(diphenylphosphino)phenyl]ether and 2-(naphthalen-2-yl)-1-phenyl-1H-imidazo[4,5-f][1,10]phenanthroline
A New Super Absorbent Polymer to Solve Formation Water of Gas Drilling
Effect of Pore Structure of Activated Carbon on its Electrochemical Performance in Non-Aqueous Electrolyte
Removal of Mercury from Simulated Coal Combustion Flue Gas by Iron Sulfide-AC Adsorbent
Electrochemical Synthesis of PANI on 316L Stainless Steel Bipolar Plates of PEMFC and its Corrosion Performance
Magnetic Field Effects on Synthesis of Porous Silica Gel and the Adsorption Property of Pb2+ Ions
Study on Application as Cigarette Paper Dry Strengthening Agent of CPAM Emulsion
Synthesis and Characterization of Substituted-Ammonium Humic Acid Fluid Loss Additive for Oil-Based Drilling Fluids
The Synthesis of Laminin with Transition Metal Y-Type Zeolite Catalyst in Methanol-Water Solvent
Thermal Explosion Experiment of Energetic Materials
A New Method for Measuring Acid Effective Consumption Time in Acid Fracturing
Preparation of Li/MgO Monolithic Catalysts and their Performance for Oxidative Coupling of Methane
The Progress of Scale Problems and Compatibility Experiment Study in Oilfield Water Treatment
Design and Trial-Production for Hydrogen Production System Based on Efficient Hydrogen-Generating Agent
Swallow-Tailed Fluorinated-Alkoxy-Substituted Hexa-Peri-Hexabenzocoronene: Synthesis and Characterization
Preparation of ZnO Powder from Clinker Digestion Solution of Zinc Oxide Ore
Li4Mn5O12 Lithium Ion Sieve Preparation and Adsorption Properties
Preparation and Properties of Fe-Mn Efficient Self Heating Material
Determination Methods for Storage Stability of Combustible Cartridge Case
Study on the Complexation of 5,11,17,23,29,35- Hexacarboxy-37,38,39,40,41,42-Hexa-Methoxy-Hydroxamic Calix[6]arene Extraction of Metal Ions
Mixture of Different Surfactants Enhanced Chemical Flooding for Suijing Oil Recovery
Sulfonated Poly(Fluorenyl Ether Ketone) Membranes with Suppressed Semi-Interpenetrating Crossover and Enhanced Proton Selectivity for Vanadium Redox Flow Batteries
Application of Diester Gemini Quaternary Ammonium Salt as Paper Softening Agent
Preparation of Novel Diester Gemini Quaternary Ammonium Salt Cationic Surfactant
Preparation of Na2S from Na2SO4 Using CO
SAPO-34/SiO2 Catalysts for the Transformation of Ethanol into Propylene
Comparative Analysis of Performance for SCR De-NOx Catalysts in Power Plant
Synthesis of Diphenyl Carbonate by Oxidative Carbonylation over Pd(II)-N/P Complexes Catalysts
Performance Study of 5-Aminotetrazole Nitrate Gas Generant
Chapter 10: Films Materials, Surface and Coating Research
Study on a New Anodic Oxidation Protective Coating of Alumina
The Influences of Additives on the Corrosion Resistant Properties of Electroless Plating Ni-Co-P Alloy on the AZ91D Magnesium Alloy
Control Schemes of the Coating Procession for the Camouflage Stone Chip Coated Steel Roof Tiles
Effect of Temperature on Plasma Nitriding of AISI410 Martensitic Stainless Steel
Effects of WC12Co Content on Wear Behavior of NiCoCrAlY Coating by Cold Gas Dynamic Spraying
The Process of Zinc Immersion on the Surface of Mg-Li Alloy
A New Chromate-Free Insulating Coating on Silicon Steel
Microstructure and Wear Resistance of In Situ Synthesized TiC-TiB2 Particulate Reinforced Ni-Based Composite Coating by Argon-Arc Cladding
Corrosion Resistance of the Nanometer Organic Coating in Grotto Environment
Facile Synthesis of Cu2SnSe3 Thin Film via Sol-Gel Process
Influence of Al-Content on the Microstructure and Mechanical Properties in ZrAlN Coatings
Structural Properties of P-Type ZnO Thin Film Post-Treated by NH3 Plasma Method
Chapter 10: Films Materials, Surface and Coating Research
Preparation of AlN Thin Film Deposited on SiO2 for Improving Temperature Frequency Coefficient of FBAR Used in CSACs
A Study on Color Variance of IMR between PET Coated and Uncoated White Ink by UV Inkjet
The Study on Color Quality Attributes of IMR with PET on White Ink by UV Inkjet
Study on Several Problems of Circular-Arc Waves Screen Plate's Design
Study on the Modification of Concentrated Emulsion of Organosilicon for Propagating Ethanol Permselective Pervaporation Film
High-Tensile Steel Bar Remained Heat Treatment Intensifying Effect and Oxide Layer Anti-Corrosion Research
Chapter 11: Biomaterials and Applied Research
Effect of High Temperature and Humidity in Storage on Component of Soy Protein Isolate
Effect of High Temperature and Humidity in Storage on Emulsibility of Soy Protein Isolate
Effect of very Low Frequency Electromagnetic Radiation on Acetylcholine Esterase Activity
Optimization of Conditions for Extracting Muscle Protein from Grass Carp Using Response Surface Methodology
Overexpression and Phylogenetic Analysis of a Thermostable -Glucosidase from Thermus thermophilus
Preparation of Cool Wool Natural Energy Storage Material
Protein Structure Prediction Based on Profile HMM and QPSO
Influence of Dihydromyricetin on Lowering Blood Glucose Concentration and Reducing Early Kidney Damage in Imparied Glucose Tolerance Rats
Modification of Zein and its Antioxidant Property In Vitro
Study on Microwave-Assisted Extraction Technology of Total Flavonoid from Castor Leaves
Current Research and Perspectives of Lipid Extraction from Wet Microalgae
Flocculation of Botryococcus Braunii with Glycine
Progress on Utilization of Water Hyacinth
Single-Step Conversion of Cellobiose to 5-Hydroxymethylfurfural (5-HMF) Catalyzed by Poly Ionic Liquid
Analysis of Fluid Loss-Reducing Mechanism of Humic Acid Acetamide Compound with Lipophilic Property
Antibiotic Nalidixic Acid Removal by Activated Carbon Prepared from Keratin Wastes
Changes of Microstructure and Viscosity of Enzymatic-Deamidated Rice Protein
Effect of Storage Conditions on Apparent Viscosity of Oleogel Developed by -Sitosterol and Lecithin with Sunflower Oil
Research on Aerobic Granular Sludge Cultivated under Selective Pressure
Determination of Tetracyclines Residues in Aquatic Products by HPLC
Development of a Hydroxypropyl- -Cyclodextrin Complex for Improving Water Solubility and Reducing Skin Sensitivity of Salicylic Acid
Study on Terpene Phenolic Compounds and its Health Effects
Determination of Aflatoxin Contaminants in Four South Medicines by HPLC
Moisture Absorption Properties and Kinetic Analysis of Three Different Kinds of Gauze
Determination of Patulin Residues in Canned Fruits by HPLC
Effect of the Additive 45S5 on the Properties of Bioactive Glass Scaffold Materials
Preparation of Lactic Acid by Polymer-Catalyzed Conversion of Maltose in Aqueous Alkaline Media
Chapter 12: Environmental-Friendly Materials and Green Technologies
A Coupling Process of Precoating Dynamic Membrane with Photocatalysis for Treatment of Oily Wastewater
Electrochemical Degradation of Methyl Orange by Samarium and Antimony Codoped SnO2 Electrodes
Study on the Sludge Dewatering Based on the Filtration Characteristic of Geotextiles
Degradation of Dyes by H2O2 with Activated Charcoal Supported MgFe2O4 under Microwave Irradiation
Inactivation of E. Coli Using ZnO Nanofluids and Ultrasound
Study on Adsorption of Chromium in Wastewater by Diatomite
Effects of Ce3+ Addition on Granulation of Activated Sludge
Polyamine Type IEF's Adsorption Efficiency to Cyanide and Copper
Study on the Regeneration of Quaternary Ammonium Heteropolyphosphatotungstate Catalyst
Treating Effect of Potassium Ferrate to Aquaculture Recirculating Water
Study of Thermal and Wet Reclamation Technology of Used Sodium Silicate Bonded Sand
A Green Approach for Highly Reduction of Graphene Oxide by Supercritical Fluid
Synthesis of a Novel Halogen-Free Intumescent Flame Retardant Agent
Synthesis, Application of a Novel Halogen-Free Intumescent Flame Retardant Agent for Poplar Wood Veneer
Comparation of Calix[6]arene and its Phosphorus Derivative for Complexation of Na+, Cu2+, Ni2+, Pb2+, Fe3+, Cr3+ and 2+ UO22+ Ions
Experimental Study on a Combined Process of Anaerobic Filter, Anoxic, Oxic and Constructed Wetland for Rural Domestic Sewage Treatment
Chapter 13: Materials Processing, Testing and Monitoring Technologies
A Certain Type of Tracked Vehicle Transmission Cabinet Failure Analysis and Fatigue Life Evaluation
Element-Free Galerkin Method of Cold Forging Steel Ball
Experimental Study on Roundness of High-Speed Cylindrical Grinding for 20CrMnTi Alloy Steel
Microstructure and Mechanical Properties of Permanent Mold Low-Pressure Casting and Sand Mold Gravity Casting of A357 Alloy
Morphology and Phase Diagram of Cyclic ABCB Tetrablock Copolymer
Phase-Field Simulation Studies of Dendrite Growth Coupling with Force Flow Field
Probabilistic Analysis of Gun Barrel Ablation Life Based on the Modified Response Surface Model
Research on the Interference Correction in the CNC Incremental Forming
Research Summary on Nanostructured Ceramic Coating Grinding Surface Residual Stress
Study on Flow Phenomenon in Spot Welding Nugget of Dissimilar Materials
The Simulation Analysis of the Influence of Grinding Point Position on Grinding Wheel
Vibration-Assisted Machining Study Based on 2R-2P Parallel Mechanism
Calculation and Analysis of Tandem Cold Rolling Force Parameters
Characteristics of Inconel 625 Filler Metal Affecting to Weld and Deposited Metal Zones in the Case of Welded to Forged Steel for Piston Crown Material
Constitutive Relationship Model of Al-W Alloy Using Artificial Neural Network
Cracking Analysis of Automobile Rim Flash Butt Welding
DC Paschen Discharge Test on Electric Performance of ITER Composite Insulation Breaks
Determination of EG Content in the Liquid Products of PET Hydrolysis under Microwave Irradiation
Effect of Porosity on Compressive Properities of Porous Titanium with Helical Pores Structure
Effect of Process Parameters on Warpage of Printer Board with Metal-Insert
Effects of Grain Size on Crack Tip Mechanical Fields of Intergranular Cracking
Fabrication of the Sheet-Metal Part with Non-Horizontal End Face Based on the CNC Incremental Forming
Forming Process Simulation and Optimization of Nickel-Base Superalloy Turbine Disk
Foundry Technique Designing of the Nodular Cast Iron Casting
Microscopic Stress Analysis of Body-Centered Cubic Crystal under High Cycle Fatigue
Numerical Simulation and Optimization of Low Pressure Die Casting of Aluminum Alloy Cylinder Block
Research on Al Particles Reinforced Thermal Stress Aging Treatment Behavior of Composite Lead-Free Solder
Research on Electrical Discharge Grinding Technics of Polycrystalline Diamond Compact Cutting Tool
Standard Simple of Tin Bronze for Casting Develepment
Study on Flatness Control Strategy of a Single-Stand Reversing Cold Rolling Mill
Study on Overburden under Temperature Loading Coal Seam Outcrop Fire Area Heat Damage Mechanics Characteristics Experiment
3D FEM Simulation of Multipass ECAP Ti-50.8%Ni at Various Temperatures
A Method to Avoid Strip Breakage for Thin Strip Steel in Cold Rolling
A New Approach of Strip Steel Tempering and Straightening in Strip Rolling
An Automatic Control Strategy of Strip Width in Cold Rolling
An Investigation on Sand Production of Vertical Shaft Impact Crusher Using EDEM
Based on the Titanium Alloy Milling Forces Modeling and Simulation Study
Charpy Impact Properties of Grain Boundary Allotriomorphic Ferrite and Granular Bainite Duplex Microstructure
Hot Radial Upset-Extruding Process for Tube Structure with a Nozzle of 316LN Stainless Steel
Microstructure and Properties under Alternating Magnetism after Hot Rolling
Numerical Simulation of Extrusion Process to Produce Complex Aluminum Profiles Using the ALE Approach
Numerical Simulation on Thermo-Forming Process of the Ultra High Strength Steel
Online Detection and Control of Strip Steel Mechanical Properties in Skin-Pass Process
Research the Application of Elliptic Filter Plate to Horizontal Filtering Tank
Simultaneous Determination of Ruthenium and Zinc in Catalysts for Hydrogenation of Benzene to Cyclohexene Using Sodium Peroxide Fusion Sample Digestion and ICP-OES
Stress Distribution on a Two Phase Problem in Micro-Extrusion
Study on Hot Rolling Process of Mg-Gd-Y-Nd-Zr Alloy Bar
Study on Surface Quality and Machining Efficiency of Diamond Wire Saw Slicing SiCp-Al Composites
Study on the Residual Stress and Fatigue Performance of Cold Expansion Hole on 7050-T7451
Study on Tribological Performances of n-Na2B4O7/ion Nitrocarburized Duplex Layer at Different Temperatures
Superhydrophobic Structure Fabricated by Femtosecond Laser on Nickel Surface
Talk from the Perspective of Petrology Carving Stone
The Portable Measurement Instrument of Dynamic Magnetic Properties for the Soft Magnetic Materials
The Research Development of the Mechanism of Fatigue Crack Initiation Based on Microstructure for Offshore Platform
The Study of Large Deformation Upsetting for TC16 Titanium Alloy
The Transverse Permeability's Simulation of Fiber Tow by FLOTRAN
Ultrasonic Vibration Dressing Technology on CBN Grinding Wheel and its Grinding Performance on K9 Glass
Calculation of Axial Rolling Force in Radial-Axial Ring Rolling Process
Experimental Technique for Ice under Dynamic Compressive Loading
Finite Element Analysis of a Gantry Type High-Speed Drilling Machine
Fracture Analysis of Pneumatic Control Valve Rod Used for Nuclear Power Plants
Influence of Relative Clearance to Hole Quality in Punching Process
Numerical Simulation Research on Hydroforming Process of Automobile Front Transom
The Press and Mold for Bonded NdFeB Magnet Molding
The Resistivity Logging Response through Casing of Eight-Layer Formations with Cement Sheath
Titanium Alloy Ultrasonic Vibration Micro Deep Holes Drilling
Diatomite Experimental Study on New Wet Purification Process
Study on Squitter Pulse Argon-Arc Welding Technology for Repairing Balance Shaft Parts
Application Research Development of Smart Materials on Personnel Armor Protective Materials
Analysis on Fracture Causes of Condensate Water Pump Shaft
The Study of Friction Materials in Brake Pad of Small Electric Car
Failure Analysis and Welding Repair for Water Wall Tube Crack of Supercritical Boiler
Complex Potentials for Plane Problem of Two-Dimensional Quasicrystals with a Lip-Shape Crack
Exact Cram'er-Rao Lower Bound for Interferometric Phase Estimator
Quality Evaluation for Automobile Seat Woven Fabric
Research on Thermal Protection Performance of Multilayer Fabrics System of Fire Clothing
Chapter 14: Applied Mechanics, Building Materials and Construction Engineering
Analysis on Flexural Property of CFRP Reinforced Concrete Beam
Existing Operational Railway Tunnel Water Leakage Causes and Remediation Technologies
Experimental Study on Flexural Behavior of CFRP Bar Reinforced Concrete Bridge Deck with Corrosion and Salt Resistance
Finite Element Analysis of the Temperature Shrinkage of Fiber Concrete
Self-Compacting and Tiny Expanding Steel Tube Concrete Using in Large Span Bridges
The Quality Control on Shengmi Bridge Arch Rib Construction
Field Experiment Study of the Semi-Rigid Base on Port Reinforced with Glass Fiber Geogrid
Flexural Behavior Finite Element Analysis of CFRP Reinforced Concrete Bridge Deck with Corrosion and Salt Resistance
Micro-Macro Material Performance Tests of One Attacked Building Foundation
PEG Molecular Weight Effects on Physical and Mechanical Properties of ETICS Plaster, Hardening at Lowered Positive and Small Negative Temperatures
Research on Sliding Layer of Cross-Tensioned Prestressed Concrete Pavement
Aerated Concrete Block Filler Wall Construction Technology and Quality Control of Preventive Measures
Comparison of the Effectiveness of Fine Mineral Fillers in Cement-Based Tile Adhesives
Development of Load-Bearing Thermal Insulation Recycled Concrete Block and Research on its Thermal Performance
Experimental Study of the Effect of Early Strength Admixture on Cement Stabilized Macadam Material
Improvement on Temperature Susceptibility of Matrix Asphalt Modified with Natural Rock Asphalt
Literature Review: Properties of Silica Fume Concrete
Mineralogical Aspects of Durable Geocement Matrix Formation - Role of Alkali
Research on Compressive Deformation Characters of Mortar-Free Grouted Concrete Masonry
Research on the Bridge Tower Crack Propagation under Thermal Fatigue Loading
Review of Landslide Stability Analysis Method
The Comparative Analysis of Chinese Green Building Assessment System and Foreign Evaluation System
The Correlation of Chloride Diffusion Coefficient and Concrete Maturity Value and its Application in Marine Engineering
The Energy-Saving Design and Construction Study on Exterior Windows in the Building
The Influence and Suppression Effect of Limestone Powder on Concrete Shrinkage
Analysis of Anshan Existing Residential Building Exterior Wall Energy Saving Reconstruction
Analysis of Deep Foundation Pit of Subway Station
Influences of Polypropylene Fiber on Properties of Foam Concrete with Iron Tailings
Study on the Influence of the Cement Stabilized Macadam's Gradation to the Modulus and Strength
The Preparation and Research of Drilling Bitten Pile in Kunming Metro Engineering
Characterization of Pore Structure of Hardened Cement-Asphalt Paste by Mercury Intrusion Porosimetry
Experimental Measurements and Computer Analysis of Heat of Hydration and Shrinkage of Large-Scale Model of Reinforced Concrete Slab
Experimental Measurements and Computer Analysis of Heat of Hydration and Shrinkage of Large-Scale Model of Reinforced Concrete Wall with Base
LQG Control of Across-Wind Response of a Tall Building with AMD
The Theoretical Study of the Cinnabar-to-Rocksalt Phase Transitions of HgTe and CdTe under High Pressure
Load Shedding Scheme Optimization Design of the Dump Slope
Numerical Simulation of Stress Intensity Factor under Multiaxial Loading
Performance of Cu-Based Catalysts in Low-Temperature Methanol Synthesis
「Nielsen BookData」 より
