Chemical engineering and material properties III : selected, peer reviewed papers from the 2014 4th International Symposium on Chemicel Engineering and Material Properties (ISCEMP 2014), June 28-29, 2014, Taiyuan, China

著者

• International Symposium on Chemicel Engineering and Material Properties
• Liu, Z. S.
• Xu, L. P.
• Liang, X. D.
• Wang, Z. H.
• Zhang, H. M.

書誌事項

Chemical engineering and material properties III : selected, peer reviewed papers from the 2014 4th International Symposium on Chemicel Engineering and Material Properties (ISCEMP 2014), June 28-29, 2014, Taiyuan, China

edited by Z.S. Liu ... [et al.]

（Advanced materials research, v. 1015）

Trans Tech Publications, c2014

• : pbk

注記

Includes bibliographic references and indexes

Other editors: L.P. Xu, X.D. Liang, Z.H. Wang and H.M. Zhang

内容説明・目次

内容説明

Collection of selected, peer reviewed papers from the 2014 4th International Symposium on Chemical Engineering and Material Properties (ISCEMP 2014), June 28-29, 2014, Taiyuan, China. The 169 papers are grouped as follows: Chapter 1: Material Science, Technology and Application, Chapter 2: Chemical Engineering and Technology

目次

Preface Chapter 1: Material Science, Technology and Application Structure Evolution of Fe-Mn Based Alloys under a Near-Rapid Solidification Process Orthogonal Experimental Study on Tool Wear in Machining CFRP with CVD Diamond Film Coated Tool High Temperature Properties of Asphalt Modified with Two Kinds of OMMTs Improvement of Crystal and Optical Properties of ZnO Film Grown on Hydrogen-Implanted Compliant Si Substrate Effect of Intercritical Hardening on Properties of 60Si2Mn Steel Quantitative Analysis of the Element Silicon by Laser-Induced Breakdown Spectroscopy A Novel Method to Order Nanowire Based on Macrofludic System Atomistic Simulation of the Self-Diffusion in Very Thin Cu (001) Film by Using MAEAM Research on the Mixing way and Content of Molybdenum Disulfide with Copper Matrix Self-Lubricating Composites The Influence of Materials Properties on the LSPR Strength of Nanoshell Particles Ultra-Thin Shellac Fibers Fabricated Using Two Different Electrospinning Processes Study on Influence Factors of Cement-Free Binding Material Based on Fly Ash and Slag The Analysis of Nano SiO2 Impacting on the Frost Resistance of EPS Lightweight Concrete The Effect of Metal Source on the Preparation of Metallofullerenes The Review of the Application of Graphene/Chitosan Composite Application Research of Orthogonal Analysis for Components Selection of Heat-Resistant Concrete Selection Research on Materials of Heat-Resistant Concrete Based on Range Theory Trial-Preparation of RSS Based Composite Containing GF Study of the Preparation and Properties of Carbon Nano-Tubes Doped TiO2/Glass Fiber Reinforced Plastics Preparation and Performance Testing of Flexible PDLC Films The Crack Tip Fields for Anti-Plane Crack in FGPM of x Linear Function The Higher Order Crack Tip Fields for Interfacial Crack between Linear Functionally Graded and Homogeneous Piezoelectric Materials Performance Test and Evaluation for Pixel CdZnTe Detector of Different Thickness Tests and Research on Characteristics of Shear Strength of Cement Improved Soil under Freeze-Thaw Cycle Research on the Properties of Collapsible Loess Reinforced by Cement Effect of Constant-Strain Aging on Microstructure, Martensitic Transformation and Magnetic Property of Ni53Mn23.5Ga23.5 Ferromagnetic Shape Memory Alloy Influence of Laser Power on the Microstructure and Anti-Wear Performance of Laser Hybrid Plasma Spraying NiCr-Cr3C2 Coatings Evaluating the Air-Entraining Concrete Performance Decay Rule under Long-Term Salts Corrosion Using MATLAB Software Study on Micro Pore Structure Characteristics of Carbonate Cores of Low Permeability Early Presumption on the 28d Strength of Cement-Clay Composite Powder Mixed Mortar RTW Based Rapid Development of Hot Strip Mill Laminar Cooling Prediction Software Color Metallographic Technique for Microstructure Analysis of Aluminum Alloy Weld A Novelty Analysis Method of Solar-Pumped Laser with Fresnel Lens and Cr/Nd:YAG Ceramic Effects of Mass Ratio of Phenolic Fiber to Quartz Fiber on the Ablative Properties of Hybrid Fabric Reinforced Composites Electronic Properties of Au-Doped Narrow Armchair Graphene Nanoribbons: A First Principle Calculations Study on Evaluation Index of Hard Machining Materials Based on the Application Feature Research about Mining Method of II Gold Ore Body in Duolanasayi Recent Advances in Centrifugal Spinning Preparation of Nanofibers Effect of Gb on Phase Transformation and Martensitic Phase Transformation in Ni-Mn-In Alloys Effect of Cryogenic Treatment on the Performance of Ultrafine Cemented Carbide Strengthening and Application Research of Carburized and Subsequently Niobiumized 40CrNiMo Steel Interaction Study of Carbide Precipitation and Impurity Segregation under Temper Embrittlement Conditions in a Coarse-Grained Heat-Affected Zone in Q690 Steel The Application of Energy-Saving and Environment-Friendly Decorative Materials in Architectural Decoration Construction Effect of Bending Speed on Forming Quality of 0Cr21Ni6Mn9N Stainless Steel Tube NC Bending Compressing Deformation and Microstructure of AZ61 Magnesium Alloy Effect of Y and Heat Treatment on Microstructure and Deformation Performance of ZK60 Alloy The Effect of the Winding Materials on the Compression and Bending Properties of GFRP Bars A Study on Thermal Spraying Sacrificial Anode Applied in Concrete Structure Cathodic Protection Temperature Field Analysis of Circular Concrete Filled Steel Tube Reinforced Concrete Column under Fire Progress in CIS Series Thin Films Solar Cells The Design and Weaving of Glass Filament Spacer Fabric Feasibility Study of Concrete Production Using Sea Sand Wased by Reclaimed Water The k*p Interaction Calculations of Conduction Band and Valence Band of InN Materials Surface Morphology and Dielectric Properties of KNN/PI Films Preparation and Study on the Electric Properties of PI-Al2O3 /PI-TiO2/PI-Al2O3 Three Layers Nanocomposite Films Investigation on the Morphology and Dielectric Properties of PI/SiO2 Nanocomposite Films Experimental Study on Aggregate RAC Study on Piezoelectric Effect and Magnetic Properties of Tourmalines Theoretical Analysis of Efficient Terahertz Difference Frequency Generation in Periodically-Inverted GaAs Crystals Study of Characterization Methods on the Particle Size of SMG Research Progress for Gypsum Retarder Removal of Coal-Fired Pollutants Using a Novel Composite Collector in a Wet Electrostatic Precipitator The Influence of Nano-Montmorillonite on High Temperature Performance of Asphalt Preparation and Application of Water-Based Fire Retardant of Ammonium Phosphate WP Enhanced PVA/LRSS Composite Preliminary Research on One Multiband Smoke Material Preparation The Current Situation and Prospects of the Stability of Microcapsule Phase-Change Suspension`s Manufacturing Effect of Low-Temperature Plasma Treatment on Surface Properties of LDPE Film Analysis of the Flow Velocity of Heavy Oil Reservoir Flooding Vent Complex Process The Preparation and Test of Green Water-Based Metal Cleaning Agent Seafloor Polymetallic Sulfides Mechanical Property Test Based on Shape Annealing Algorithm Single Crystal Finite Element Analysis Based on Tabu Algorithm Heat Treatment Analysis of the Alloy Dynamic Compression Behavior of Ti-6Al-4V Plates Prepared by a Single Electron Beam Cold Hearth Melted Ingot Preparation of Medical Low-Temperature Wood-Plastic Polycaprolactone Composites and their Properties Electrospun PLGA/SF Modified with Electrosprayed Microparticles: A Novel Biomimetic Composite Scaffold for Vascular Tissue Engineering The Parameters Control of Recirculation Treatment for Leachate Preparation of an Environmental Friendly Slow Release Nitrogen Fertilizer Process Study on Green Treatment of Waste Anolyte Facile Biomimetic Fabrication of Hollow Hydroxyapatite with Hierarchically Porous Microstructure Using Hyperbranched Gemini Surfactant as Template Pretreatment Techniques for Arsenic Speciation Analysis in Biosamples The Chemical Constituents Study in the Root of Astragalus membranceus Chapter 2: Chemical Engineering and Technology Synthesis of Graft Copolymer of Starch-Acrylamid-Propylene Hydroxamic Acid and Capability of Trapping Pb2+ Studies on the Chemical Constituents in the Essential Oil from the Leaves of Cinnamomum Bodinieri Levl Magnetism and Half-Metallicity in (100) Surface of Inverse Heusler Mn2CoSb Synthesis and Characterizations of Poly(Butylene Succinate) Copolyester Study of Porous Plate Hydrodynamic Cavitation Device for P-Nitrophenol Study on Spin Transport Properties in Transition Metal Atoms Interfered Alpha-Graphyene Nanoribbon Systems Preparation of Chitosan-Diatomite Adsorbent and Adsorption to Cu(II) in Waste Water Effect of Gamma Irradiation on the Migration of Di(2-Ethylhexyl) Phthalate from Plasticized Poly(Vinyl Chloride) into Air and PVC Resin Stable and Metastable Phase Equilibria of the Lithium-Containing Salt-Water Systems Phase Chemistry and Thermal Chemistry on the Calcium-Containing Brine Systems Phase Equilibria of the Aqueous Systems Containing Magnesium and Borate Ions Processes on the Thermodynamic Properties of Lithium Borates Rubidium and Cesium Recovery from Brine Resources Phase Equilibria of the Aqueous Lithium-Containing Carbonate Systems The Influence of Donor-Doped Content on PTC Effect of Ba-Excess BaTiO3 Based Ceramics Fired in Reducing Atmosphere The Ammonia Leaching Method of Recycling the Spent Copper-Chromium Oxide Catalysts Acid Properties of MCM-36 Molecular Sieve and its Catalytic Behavior in Benzene Alkylation with Propylene Synthesis and Electrochemical Performances of Nanoscale TiO2 as Anode Material for Lithium Ion Batteries Preparation Nano-Sized ZnO/Ag Particles and Photocatalytic Degradation of UDMH Wastewater Application of Modified Carbon Molecular Sieves for Air Separation Based on Adsorption Kinetics Study on Nano-Diamond Cathode Field Emission and Characteristics of Luminescence by Electrophoresis Interfacial Wetting Behavior under Low-Density Ultrasonic Field and Solvent - Assisted Wet Condition Preparation and Properties of Nylon 6/66 Copolymer with a Small Proportion of Hexamethylene Adipamide Salt Thermal Conversion Characteristics of Coal Tar Soft Pitch at Atmospheric and Elevated Pressures The Mineralization of Calcium Carbonate in Mixed Solvent Controlled by Polystyrene-b-poly(vinyl pyrrolidone) Cobalt Ion Extraction by 2-Ethylhexyl Phosphoric Acid Mono-2-Ethylhexyl Ester Microemulsion Saponified Study on Effect of Sericin on Size and Shape of Silver Nanoparticles Prepared by a Redox Method Blue Phosphorescent Organic Light-Emitting Diodes Based on Biphenyl (Spiro[fuorene-9,9'-yanthen]-2-yl) Phosphine Oxide Host Preparation and Photocatalytic Activity of Titanium Dioxide-organosilicone-Heteropolyacid Photocatalysts Study on Extraction of Mesophase from Steel Slag by Potassium Hydroxide-Sucrose (KOSH) Solution Method Solvent-Free Oxidation of Benzyl Alcohol by 30% H2O2 over LDH Hosted Chromium Complex Study on Nano-Hydroxyapatite Assisted Preparing by Ionic Liquids Cyclic Oxidation Resistance of Co-10Cr-5Al-0.3Y Alloy at 800 oc Study on Kinetics of Nano-Ni(OH)2 Powder Ethanol Desorption Process Transient Photoelectrochemical Analysis of the Semiconductor Properties of Oxide Films on Alloys The Influence of Donor-Doped Content on PTCR Effect of (Ba1-xSmx)TiO3 Based Ceramics Prepared by the Reduction Sintering-Reoxidation Method First Principles Study on Adsorption for Different Concentration of H2S on Fe(100) The Plasma Treatment Influence on the Adhesive Wafer Bonding by the PDAP Interaction between Enrofloxacin and the Extracellular Polymeric Substances from Platymonas Subcordiformis Influence of Evaporation Temperature on the Morphology, Polymorph and Mechanical Properties of Poly(vinylidene fluoride) Solution-Cast Membranes Progress in Research of the Combined Adsorption-Photocatalysis for the Removal of Volatile Organic Compounds Phase Equilibrium Study at 220 DegreesC of Li+,Mg2+//Cl-, SiO32--H2O Systerm Investigation on the Fano Line Shaped Raman Modes of the Hydroxyl and Deuteroxyl Cobalt Chlorides Factor Group Analysis on the Deformed Pyrochlore-Structure Hydroxyl Transition Metal Halides Research on the Effect of Calcined Mg/Al Layered Double Hydroxides on Fluoride in Water Based on Adsorption Kinetics Model Corrosion Rule and Amendment Method Research on the Natural Gas Long-Distance Pipeline in the Northwest Region Study on Preparation of RGB Tricolor Up-Conversion Fluorescent Powder Determination of Ruthenium in Waste Ruthenium-Loaded Carbon Catalyst Samples Using Teflon Pressure Vessel-Assisted Sample Digestion and ICP-OES Synthesis of Substituted Ethyl Argiosulfonylcarbamates Synthesis of One Novel Thieno[2,3-D]Pyrimidine Derivative Bearing a Sulfonylurea Moiety Isotope Analysis on the Recharge Source of the Leakage Water behind the Right Dam of Suzhi Hydroelectric Station The Degradation of Chitosan Using Hydrodynamic Cavitation with NaNO2 Enhancement The Respond Characteristic Property in Different Temperatures of SAW Sensor with p-tertbutylcalix[4]arene Coatings to Detect DMMP Synthesis of Calixarene Derivatives in One Reaction System Adsorption and Diffusion of Aluminum, Gallium and Indium Atoms on Semi-Polar Gallium Nitride Substrate Surface: A First Principle Simulation Efficient Enantioselective Michael Addition of Nitroalkenes Catalyzed by a New Surfactant-Type Thiourea Organocatalyst in Water Doping with Metal and Compound to Improve the Properties of Hydrogen Storage of MgH2 Synthesis and Optimization of Trimethylolpropane Rapeseed Oil Ester The Synthetic Process of Disperse Peach SE-RL Research of Microwave - Ethanol Auxiliary V2O5-WO3/TiO2 SCR Catalyst Regeneration Experiment Preparation and Visible-Light Photocatalytic Activity of Cu2O/PVA/Chitosan Composite Films Influence of Preparation Time on Electrochemical Impedance Spectroscopy of the Dodecafluoroheptyl-propyl-trimethoxysilane SAMs on Aluminum Alloy 6061 Nitrogen Removal by River Systems of the Feng River Basin in China Variation of pH during the Carbonation of CaCl2 and its Effect on the Concentration of CO32- and the Ratio of [Ca2+] to [CO32-] Study on the Field Emission of Titanium-Based Nanodiamond Diode Structure by Electrophoretic Deposition The Adsorption of Cu2+ onto Chitosan-Aluminium Oxide Composite Material The Adsorption of Chitosan-Aluminum Oxide Composite Material to Mercury Ions Coal Preparation Circulating Water Treatment Using Coarse Tail Coal-Slime as Filter Medium Study on Corrosion of X80 Pipeline Steel in Different Water Content of Soil Frequency Domain Analysis and Application of Electrochemical Noise of X80 Pipeline Steel The Design and Experimental Study on the Lance of the Cement Industry Flue Gas Denitration Technology Preparation and Characterization of TiO2/Coconut-Activated Carbon Photocatalytic Materials Preparation and Characterization of the Rejuvenator Seal Materials with Fluid Catalytic Cracking Flurry Growth of Semi-Insulating GaAs Crystal with Uniform Si Doping New Material Research and Application for Few Piece Leaf Spring of Heavy Vehicles Synthesis of Microstructured ZnO in Hydrazine Hydrate Using a Hydrothermal Method and its Optical Properties Microstructural Characterization of In Situ Reaction TiB2/Zn-30Al-1Cu Composites Prepared by Spray Deposition Process Corrosion Inhibition of Polyethylene Glycol for Magnesium Alloy AZ91 at Different Temperatures Experimental Investigation on the Liquid Distributor Performance for the Falling Film Evaporation Process Saving Ladle Control Model of Steel Ladle in Steelworks Intestinal Absorption, Pharmacokinetics and Tissue Distribution of Gossypol Nanosuspensions Preparation and Characterization of Gossypol Nanosuspensions A Biomimetic Approach to Enhancing Interfacial Interactions: Polydopamine-Coated Silica as Reinforcement for Epoxy Resin Control the Pollution of Pig Farm's Manure Wastewater and Resource to Cultivate Microalgae Dairy Farming Simulated Organic Wastewater of Degradation Experiment by Hydrogen Peroxide Synthesis of Hydroxyapatite Microspheres with Rutin as Template An Improved Particle Swarm Optimization Based on Biological Chemotaxis

「Nielsen BookData」 より

詳細情報

• NII書誌ID(NCID): BB17769886
• ISBN:
  • 9783038352303
• 出版国コード: sz
• タイトル言語コード: eng
• 本文言語コード: eng
• 出版地: Pfaffikon
• ページ数/冊数: xvi, 754 p.
• 大きさ: 24 cm
• 親書誌ID:
  • BA24926058