Advances in abrasive technology XVII : selected, peer reviewed papers from the 17th International Symposium on Advances in Abrasive Technology (ISAAT 2014), September 22-25, 2014, Hawaii, USA
Author(s)
Bibliographic Information
Advances in abrasive technology XVII : selected, peer reviewed papers from the 17th International Symposium on Advances in Abrasive Technology (ISAAT 2014), September 22-25, 2014, Hawaii, USA
（Advanced materials research, v. 1017）
Trans Tech Publications, c2014
- : pbk
Available at / 1 libraries
-
No Libraries matched.
- Remove all filters.
Note
Includes bibliographical references and indexes
Description and Table of Contents
Description
Collection of selected, peer reviewed papers from the 17th International Symposium on Advances in Abrasive Technology (ISAAT 2014), September 22-25, 2014, Hawaii, USA.
The 138 papers are grouped as follows:
Chapter 1: Abrasive Machining,
Chapter 2: Surface Quality,
Chapter 3: Brittle Material Machining,
Chapter 4: Grinding Wheel,
Chapter 5: High Efficiency Machining,
Chapter 6: Cutting Technology,
Chapter 7: Tribology in Manufacturing, Chapter 8: Micro/Nano Machining, Chapter 9: Finishing/Lapping/Polishing,
Chapter 10: System Development,
Chapter 11: Monitoring & Analysis,
Chapter 12: Metrology & Evaluation,
Chapter 13: Chemo-Mechanical Polishing,
Chapter 14: Non-Traditional Machining
Table of Contents
Preface, Committees and Sponsors
Chapter 1: Abrasive Machining
On the Profile and Microstructure Variations of Grinding-Induced Hardening Layer in A Cylindrical Workpiece
Study on Grinding Force Distribution on Cup Type Electroplated Diamond Wheel in Face Grinding of Cemented Carbide
Investigations on Belt Grinding of GH4169 Nickel-Based Superalloy
Basic Study on High Efficiency Ultra-Precision Grinding of the Optical Glass Lens
Studies on Grinding Conditions Affecting the Quality of Soft Magnetic Powder Cores
Effect of Coolant Supplied through Grinding Wheel on Residual Stress of Grinding Surface
Multi-Hole Drilling Method by Abrasive Blasting for CFRP and Composite Materials: Investigation of a Processing Model Based on Abrasive Erosion Phenomenon
A Controllable Material Removal Strategy Considering Force-Geometry Model in Marine Propeller Five-Axis Belt Grinding
Form Accuracy of Internal Grinding of Small and Deep Holes with Coolant Supplied from Inner Side of Grinding Wheel
An Experimental Study on Grinding Fir-Tree Root Forms Using Vitrified CBN Wheels
Deformation and Removal Characteristics of Multilayered Thin Film Structures in Nanoscratching and Diamond Lapping
Influence of Work Speed on Surface Quality with Rapid Rotation Mirror-Like Surface Grinding
Estimation of Grinding Cycle Time Taking into Account Specific Grinding Force
Study on the Shape Error in the Cylindrical Traverse Grinding of a Workpiece with High Aspect Ratio
Research on Material Removal Mechanism of Single Grit Cutting Based on FEM Simulation
A Preliminary Study of Surface Integrity and Wheel Wear in the Grinding of Multilayered Thin Film Structures
Experiment Research on ZrO2 Engineering Ceramics with Abrasive Belt Grinding
Research on Grinding of Silicon Particles Reinforced Aluminum Matrix Composites with High Volume Fraction
Investigation of Grinding Characteristics of Cemented Carbides YL10.2 and YF06
Optimization of Grinding Conditions in Non-Axisymmetric Aspherical Grinding
Study on the Grinding Machinability of 9Mn2V under Different Heat Treatment Processes
Study on Force Characteristics of Ultrasonic Vibration-Assisted Sawing Ceramics with Diamond Blade
Chapter 2: Surface Quality
Investigation of Glass Polishing Motion Based on Micro-Oscillating Pressing Force with a Compact Robot and Fine Diamond Stone
Development of Non-Destructive Inspection System for Grinding Burn-in-Process Detection of Grinding Burn
Feature Extraction Based 3D Model Registration for Surface Finish Quality Evaluation
Dry Sliding Wear Behaviour of Full Pearlite Obtained by Cladding Low Carbon Steel to Hypoeutectoid Steel
Material Properties of a New PCD Made of Boron Doped Diamond Particles
Dynamic Friction Polishing of Diamond Utilizing High Reactive Metallic Tools
Evaluation and ANN-Based Prediction on Functional Parameters of Surface Roughness in Precision Grinding of Cast Iron
Chapter 3: Brittle Material Machining
An Experimental Study on Single Point Diamond Turning of an Unpolished Silicon Wafer via Micro-Laser Assisted Machining
Effect of Cutting Fluid on Diamond Tool Life under Micro V-Groove Turning of Cobalt-Free Tungsten Carbide
A Three-Dimensional Fractal Analysis Method for Ground Monocrystal Sapphire Surface
Microgrooving of Germanium Wafers Using Laser and Hybrid Laser-Waterjet Technologies
An SPH Simulation on Vibration Assisted Abrasive Erosion of Hard Brittle Material in Abrasive Waterjet Machining
Machining Characteristics in Cylindrical Blasting of Micro Grooves and Performance of Herring-Bone Bearing
Study on the Model of Surface Crack Depth in Ceramics Grinding
Radial Directional Vibration-Assisted Ductile-Mode Grinding of Engineering Ceramic
Blind Hole Machining of Quartz Fiber Reinforced Ceramic Matrix Composites by Helical Milling with Electroplated Diamond Tool
A Study on Erosion of Alumina Wafer in Abrasive Water Jet Machining
Chapter 4: Grinding Wheel
Optimizing the Dry Grinding Process on the Basis of Bond Materials
High Efficiency Abrasive Waterjet Dressing of Diamond Grinding Wheel
An Explorative Study of Fabrication of Al-Based Matrix Diamond Grinding Wheels by Vacuum Evaporative Pattern Casting
Wafer Grinding of Using Fixed Abrasive Diamond Wheel - Evaluation of Cutting Edge Distribution in Diamond Wheels
Wear of Diamond Wheel in Groove Grinding of Cemented Carbide - Influences of Speed Ratio and Nitrogen Gas Dissolved Coolant
Evaluation of Grinding Performance by Mechanical Properties of Super Abrasive Wheel - Relationship between Modulus of Rupture and Critical Grain Holding Power (2nd Report)
Investigation on Properties of Magnesia Grinding Wheels Used in Silicon Wafer Grinding
Chapter 5: High Efficiency Machining
Research on 3D Model Processing Technologies in the Application of Freeform Surface Machining
Stress Influence on Corrosion Resistance of Aluminum Alloy Surface
Distribution of the Convection Heat Transfer Coefficients of Grinding Fluids along the Contact Zone in High Speed Grinding
Performance of Strong Alkali Ion Water in Cutting and Grinding Applications
Study of Grinding Wheel for Polishing Diamond by Dynamic Friction Polishing
Influence of Tool Shape and Coating Type on Machined Surface Quality in Face Milling of CFRP
Chapter 6: Cutting Technology
Machining of Sintered Tungsten Carbide for Die and Mold
Laboratory Comparison of SMART*CUT Picks With WC Picks
Essential Research in Machining Difficult-to-Machine Materials for Advancing MQL Cutting Technology with a Newly Developed Coated Tool
Experimental Verification of End-Milling Condition Decision Support System Using Data-Mining for Difficult-to-Cut Materials
High Speed Machining Method of Large-Size Precision Freeform Mirror
A Study on Straightness of Deep Hole in Small-Diameter Drilling of Stainless Steel
Development of Axially Splitting Method for the Pipe Materials with the Cutting Tool
Small Hole Drilling for Polyphenylene Sulfide (PPS) - Influence of Depth-of-Cut on Burr Formation
Investigation Performance of AlCrN_Based Coated Broaching Tool in Broaching of Gas Turbine Material X12CrMoWVNbN1011
Study on Surface Finish of Carbon Steel by Ultra-Precision Diamond Cutting
A Study of Ultrasonically Added High Speed Turning for Stainless Steel - The Effects of Ultrasonic Oscillating Direction and Chip Breaker Shape and Material
Investigation of the Surface-Modification Effect by Oil-Immersion Treatment on Carbide Tool
Face Milling of Carbon Fiber Reinforced Plastic Using Poly Crystalline Diamond Tool
Cutting Performance of Binder-Less Nano-Polycrystalline cBN Tool
An Innovative Cooling Method for Grinding Process Based on Heat Pipe Technology
Simulations of Milling Process of Inconel 718 Alloy Based on Three Dimensional Finite Element Models
Wear Characteristics of Binder-Less Nano-Polycrystalline Diamond and Cubic Boron Nitride
Development of PCD Milling Tool for Carbon-Fiber-Reinforced Plastics
Chapter 7: Tribology in Manufacturing
Friction Characteristics with Pin-on-Disc Friction Test on Microstructured Surface Using Whirling Electrical Discharge Texturing
Tribo-Electrochemical Performance of Polycrystalline Silicon during ECMP Simulating Process
Long-Duration Frictional and Wear Performance of the Diamond/DLC Bilayered Film under Water-Lubricating Condition
Tribological Analysis of Oxide Scales during Cooling Process of Rolled Microalloyed Steel
Study on Identification of Contact Stiffness Considering Surface Roughness
Study on the Tribological Property of Bionic Lead Rail Using ABAQUS
A Wear Simulation of the Fixed Soft Abrasive Film Based on Discrete Element Method
Investigation of Grinding Fluid Supply Parameters on Workpiece Surface Integrity
Chapter 8: Micro/Nano Machining
Precision Machining of Parabolic Mirror Made of Low Thermal Expansion Ceramic
Synergistic and Strengthening Mechanism of Twin Boundaries under Nanoindentations for Cadmium Telluride Semiconductors
Removal of Ion Irradiation-Induced Affected Layers from Diamond Cutting Tools to Improve Machining Performance
Fabrication of Shapes with Overhang Using Micro-Boring Tools
Ultraprecision Micro Grooving on Brass for Surface Wettability Control
Influence of Processing Parameters on Surface Roughness in Micro Mill-Grinding Aluminium Alloy 6061
Experiment Research on Surface Roughness in Micro-Grinding Metal Material
Chapter 9: Finishing/Lapping/Polishing
Preliminary Study on Highly Efficient Polishing of 4H-SiC by Utilization of Anodic Oxidation
Development of an Advanced Machine Control System in Superfinishing the Automatic Determination of the Suitable Machining Time
Study on Fixed-Abrasive Lapping SiC Crystal Substrate Based on Diamond Particle
Precision Shaping Experiment of Ceramic Ball Blank with Oscillating-Plate Lapping Method
Advanced Abrasive Processes for Manufacturing Prototype Mirror Segments for the World's Largest Telescope
Effect of Cyclic Heating on the Hardened Layer Properties Generated by Plunge Cylindrical Grinding
Grinding Performance of Diamond Grinding Tools for Sapphire Crystal
Characterization of Cutting Ability of Electroplated Diamond Wire Used for Multi-Wire Saw
Micro-Cracks Removal on Edge Surface of Thin Glass Sheet Using Magnetorheological Finishing
Study on the Flow Pressure of Mass in Centrifugal Disc Finishing
Research on Performance of Fixed Abrasive Tools of Polishing 6H-SiC Wafers
Chapter 10: System Development
Conditioning of Vitrified Bond CBN Grinding Wheels Using a Picosecond Laser
Design of Double-Sided Polishing Machine for Functional Crystal Substrate
Development of Non-Contact Classifying Systems by Use of Acoustic Levitation
Computer-Aided Simulation of Dressing Using Diamond Rotary Dresser and Visualization of Dressing Process
Simulation of Chip Formation Behavior during Single Diamond Grains Grinding by CEL Method
Development of Rotary Work Table with Constant-Flow Hydrostatic Water Bearing for Large Scale Silicon-Wafer Grinding Machine
Development of a Fine Grating on ZnS for a Wideband Spectral Disperser in Characterizing Exoplanets Using Space-Borne Telescopes
Chapter 11: Monitoring & Analysis
Sensorless Cutting Force Estimation in Ball-Screw-Driven System Using Triple-Inertia Model
Monitoring of End-Mill Temperature with Infrared Thermography and Wireless Tool Holder System
Experimental Study on the Cutting Performance of In Situ Fabricated TiB2 Toughened TiN-Based Composite Ceramic Tool in Turning Stainless Steel
Entire Hardening of Small Thin Plate with a Small Power Semiconductor Laser Considering Plate Deformation
Investigation of Step Micro-Drilling Motion Based on Modeling of High Speed Spindle Driving Axis on Machine Tools Equipped with Vibration-Proof Mechanism
Study on a Novel Brazed Diamond Wire with CuSnTi Brazing Filler
A 5-Axis Coordinated CNC Grinding Method for the Flank of a Non-Coaxial Helical Micro-Drill with the Cylinder Grinding Wheel
Chapter 12: Metrology & Evaluation
Manufacturing Process Evolution Method of Neutron Ellipsoidal Mirror Simulation Using Measured Point-Set
A Study on Fast Geometric Form Measurement of High Precision Balls
Development and Practicality of a Scanning Point Autofocus Instrument for High Speed Areal Surface Texture Measurement
Influence of Surface Integrity in Silicon Wafer Thickness Measurements by Reflection Spectroscopy
The Topographic Characterisation of Grinding Wheels - A Proposed Measurement Strategy
Estimation of Machining Error in Ball-End Milling of Hemispherical Surface Based on Measured Cutting Force
Monitoring of Wear Land Width of Diamond Tool Cutting Edge with Large Nose Radius in Ultra-Precision Cutting Using Static Cutting Forces
Chapter 13: Chemo-Mechanical Polishing
Future Prospects for CMP Equipment - Design Considerations According to Substrate Size and Shape
Measuring Surface Topography of a Diamond Wire Using an Image Processing Method
Effect of Surface Profile on the Material Removal Rate Distribution in CMP Process
Chemical Mechanical Polishing of Soft-Brittle Cadmium Zinc Telluride Wafers Using a Developed Environment-Friendly Solution
Effectiveness Evaluation of Novel Pad Dressing Method by Flexible Fiber Dresser - Tool Life Evaluation of Flexible Fiber Dresser
Chapter 14: Non-Traditional Machining
Numerical Investigations on the Grinding Forces in Ultrasonic Assisted Grinding of SiC Ceramics by Using SPH Method
The Influence of Amplitude on Grinding Force and Surface Roughness in Ultrasonic Assisted Grinding of K9 Glass
High-Speed Capturing of Stress Distribution of Workpiece under Ultrasonically Assisted Cutting Condition
Effect of Frequency and Amplitude on the Performance of Elliptic Vibration-Assisted Cutting of Fibre-Reinforced Polymer Composites
Smoothed Particle Hydrodynamics Simulations for Ultrasonic Machining of Different Workpiece Materials
Modeling and Simulation of Surface Topography Evolution in Electrical Discharge Machining (EDM)
Wire-EDM Properties of EC-PCD Made up of Boron Doped Diamond Particles
Performance of EC-PCD Made of Boron Doped Diamond as an Electrode for EDM of Cemented Carbide
EDM Machinabilities of EC-PCD Using Ultrasonic Assisted EDM and Bipolar Pulse Current EDM
Curved Surfaces Forming of Sheet Material by Laser Irradiation
Production of Fe-Al Alloy Coat on Steel Block by Scanning Laser Beam
Ultrasonic Vibration Assisted Grinding of Sintered Dental Zirconia Ceramics: An Experimental Study on Surface Roughness
External Magnetic Field Control during EDM of a Permanent Magnet
Development of Ultrasonic Lapping Equipment for Small Holes Finishing
Experimental Investigation of Copper-Tungsten Electrode Wear in EDM
Proposal of Micro Removal Process with Pulsed Laser Irradiation Based on Form Generation Theorem
by "Nielsen BookData"