Advanced materials, structures and mechanical engineering : selected, peer reviewed papers from the 2014 International Conference on Advanced Materials, Structures and Mechanical Engineering (ICAMSME 2014), May 3-4, 2014, Incheon, South-Korea

Author(s)

    • International Conference on Advanced Materials, Structures and Mechanical Engineering
    • Song, H. M.
    • Hu, J. W.
    • Son, H. K.

Bibliographic Information

Advanced materials, structures and mechanical engineering : selected, peer reviewed papers from the 2014 International Conference on Advanced Materials, Structures and Mechanical Engineering (ICAMSME 2014), May 3-4, 2014, Incheon, South-Korea

edited by H.M. Song, J.W. Hu and H.K. Son

(Advanced materials research, v. 1025-1026)

Trans Tech Publications, c2014

  • : [set]
  • Part 1
  • Part 2

Available at  / 1 libraries

Search this Book/Journal

Note

Includes bibliographical references and indexes

Description and Table of Contents

Description

Collection of selected, peer reviewed papers from the 2014 International Conference on Advanced Materials, Structures and Mechanical Engineering (ICAMSME 2014), May 3-4, 2014, Incheon, South-Korea. The 213 papers are grouped as follows: Chapter 1: Applied Mechanics and Manufacturing Processes Engineering, Chapter 2: Material Science and Technology, Chapter 3: Civil and Structural Engineering, Chapter 4: Other Related Topics.

Table of Contents

Preface Chapter 1: Applied Mechanics and Manufacturing Processes Engineering Particleboard Manufactured with Additions of Eucalyptus Bark in Different Percentages in the Internal Layer Screening for Welding Defects Using Acoustic Emission Technique Medium Density Particleboard (MDF) Produced with Pinus caribaea Fibers and Castor Oil Based Polyurethane Resin Fatigue Evaluation of Trough Splice Joints in Orthotropic Steel Decks Design of Pressurized Vaulted Rectangular Conduits Using the Rough Model Method (Part 2) Thermo Elastohydrodynamic Lubrication with Liquid-Solid Lubricant The Influence of the Production Process on Mechanical Properties of Rubber Testing Samples Influence of Moisture Content in some Mechanical Properties of Two Brazilian Tropical Wood Species Physical and Mechanical Properties of Dipteryxodorata (Aublet) Willd Modelling of Fretting Wear under Partial Slip Conditions Using Combined Isotropic-Kinematic Hardening Plasticity Model Modeling Errors in Coordinate Measuring Machines and Machine Tools Using Homogeneous Transformation Matrices (HTM) Extraction and Thermal Processing of Beke Oil Sands Influence of Storage Period of Pieces in Stiffness of Pinus elliottii Glulam Beams The Cracking Mechanism and Anti-Cracking Measures for Hydraulic Mass Concrete Approach to the Ear Plate and Round Steel Connection Numerical Modelling of Nonlinear Vibration Isolation System Free Oscillations Study about the Stone Curves and the Development of Polygonal Shape Cutting Device About Verification of Discrete-Continual Finite Element Method for Two-Dimensional Problems of Structural Analysis Part 1: Deep Beam with Constant Physical and Geometrical Parameters along Basic Direction About Verification of Discrete-Continual Finite Element Method for Two-Dimensional Problems of Structural Analysis Part 2: Deep Beam with Piecewise Constant Physical and Geometrical Parameters along Basic Direction Fatigue Evaluation of Autofrettaged Thick-Walled Cylinders with a Radial Cross-Bore Testing of Mechanical Protection of Data Distribution Mechanisms Utilization of Mosaic Sludge Waste into Fired Clay Brick: Properties and Leachability Experimental and Numerical Investigation on Flow Characteristics of a Water Jet Impingement Structural Design and Improvement of Wind-Driven Generator Cooling System A Ground Test Method and the Error Analysis of the Heat Exchanger in the Intake of Aircraft Refined FEM Analysis of 1000MW Generator Stator during Integral Transportation on Railway 3D Ice Accretion Simulation for Complex Configuration Basing on Improved Messinger Model Automatic Machine for Sorting Colored Objects with Conveyor Belt Research into Fatigue Crack Life Characteristics of Bellows Operated under High-Frequency Load Effect of Thermocycling on Shear Bond Strength of the Three No-Mixed Bonding Adhesives Comparisons of the Mechanical Properties of 3 Commercial Brands of Non-Latex Orthodontic Elastics Study on the Performance of an Open Loop Cycle CO2 Refrigeration System in the Extreme Limit Condition Dynamic Characteristic Analysis of Hydraulic Servo System in a Mold Oscillating Mechanism Evaluation of Longitudinal Modulus of Elasticity in Wood Species for Structural Application Evaluating a Test Parameter in Static Bending for Pinus sp. Wood The Influence of Different Carbon Type Fillers on the Mechanical and Physical Properties of Co-Extruded PP-Based WPC Tensile Properties during Solidification of Aluminium Die Casting Alloys Grade ADC5, ADC6 and ADC12 Mechanical Property Improvement of Poly(Butylene Succinate) by Reinforcing with Modified Fumed Silica Mechanical Properties of PLA/LLDPE Films Reinforced with Silica from Rice Husk Effect of Wood Moisture Content in Edge Glued Panel Bonding for Furniture Industry: Analysis of Shear-Stress and Rupture in Bondline Simulation Analysis of In-Service Bamboo and Pine EGP Composite Flooring Characterization of Mechanical and Thermal Properties of PP/Mineral Composites Use of Macadamia Nutshell in the Production of Eucalyptus Salign Particleboards Effect of Ionizing Beta Radiation on the Strength of Bonded Joints of Polycarbonate Temperature Stability of Modified PBT by Radiation Cross-Linking Tensile Behaviour of Modified PBT by Radiation Cross-Linking Influence of Recycled Irradiated HDPE on Mechanical Behavior of LDPE/Hdpex Blends Creep Test Evalutation Behavior of Recycled Material at Higher Temperature in Compression Test Size Effect of Recycled Material to Tensile Properties of PC Injection Molding of Rubber Compound Influenced by Injection Mold Surface Roughness Particulate Composites with Wastes from Treated Wood and Tire Rubber Effect of Linear Sliding Speed on Wear Behavior of Al2O3/TiC Ceramic Composite and Diamond Slicing Blade Temperature Prediction at the Blow End of the Converter via Control Model Wear Response of Composition-Modulated Multilayer Ni-W Coatings Study of Weld Hardness of Pipes at Elevated Temperature Application in Power Plants Cutting Ceramic Materials: Influence of Abrasive Machining and Coating Deposition on the Performance Potential Effect of Temperature on Deactivation Force of Three Commercial NiTi Orthodontic Archwires Comparison of Horizontal and Vertical Deactivation Force, Length and Superelasticity in Three Commercial NiTi Orthodontic Archwires Stacking Design of Composite Laminate in Wheelchair Structure under Seat Loading Self-Tapping Screws without Pre-Drilling for Brazilian Reflorestation Species Optimization of Eutectic Si Particles Morphology in Secondary Al-Si Cast Alloys after Different Heat Treatment Prognosis the Erosion-Corrosion Rates for Slurry Seawater Flow in Steel Pipeline Using Neural System The Influence of Cross-Section Shape Changing on Work of Cold Formed Beam The Dynamics Model Analysis of Drying Process in Gelcasting Method New Method for Evaluating Dynamic Characteristics of Cantilever Spring of Vibration Sensor Multiscale Model of Shape Rolling Taking into Account the Microstructure Evolution - Finite Element Modeling Comparison of the Initial Repeated Bond Strength among Three Orthodontic Bonding Systems Finite Element Analysis of the Fine Blanking Process for Seat Recliner Plate Holder of Recreation Vehicle Effects of Al Additions and Reheat Treatments on Microstructures of Modified Nickel-Based Superalloy, Grade Inconel 738, by Vacuum Arc Melting Process Chapter 2: Material Science and Technology Effect of Beta Low Irradiation Doses on the Micromechanical Properties of Surface Layer of LDPE Nanohardness of Electron Beam Irradiated HDPE Effect of Beta Low Irradiation Doses on the Filled PA66 Measured by Micro-Indentation Test Effect of the Calcination Temperature on Ni2P/TiO2-Al2O3 Catalyst Structure and Catalytic Activity for Hydrodesulfurization Effect of Heat Treatment on Grain Growth of Beta Titanium Alloy Frequency and Temperature Dependence of Dielectric Properties of Orthorhombic HoMnO3 Thin Films Evaluation of Bamboo Particleboards Produced with Urea-Formaldheyde Resin Physical Characterization of Particleboard Produced with Waste from Ethanol and Sugar Mill Study the Effect of the Substitution of Ba with Pr in Barium Ferrite Powder on Magnetic Properties Influence of Rate of Heating to Aging Temperature on Precipitation Hardening in a Metastable Titanium Alloy Influence of Reactive Organic Flame Retardants on Properties of Resol Phenoplast Foams New Nickel Based Superalloys Development by Vacuum Arc Melting Process Based on Aluminum Addition of GTD-111 Toughening of Poly(Lactic Acid) by Blending with Poly(Ethylene-co-Octene) A Simple and Efficient Route for Preparing 4-Chloro-3,5-Dinitropyrazole Sterilization of Oil Palm Fruits by Microwave Heating for Replacing Steam Treatment in Palm Oil Mill Process Effects of Soybean Antioxidant Peptides (SAP) on SOD, GSH-Px, CAT Activity and MDA Levelin Vivo Optimization Statistical Condition of Incubation for the Growth State of a Recombinant Strain Produced Alkaline Protease Removal of Humic Material from Mineralized Algerian Water Using Alum and Local Clay as Coagulant Aid Comparison Study of Oxidation Behavior of Copper at Elevated Temperatures Analysis of Structural Transformations of Fe80Ni10Si5B5 Amorphous Alloy Based on Temperature Changes of Electrical Resistivity Comparison Study of Oxidation Behavior of Low Carbon Steel at Elevated Temperatures Synthesis of Vanadium Powder by Magnesiothermic Reduction Hydrothermal Synthesis of Porous Materials Using Calcined Kaolin with Small Molecular Amine Templates Nickel Recycling by Magnesium Reaction of Fe-Ni Alloy Scrap Effect of ZnO Nanoparticles Synthesized by Precipitation Method on Cure Characteristics and Morphology of EPDM Foam Exhaust Dyeing Poly(Lactic Acid) Fabrics with Indigo Dye Obtained from Indigofera Tinctoria Experimental Study on the Thermal Conductivity of Thermal Insulation Materials Used in Residential Buildings Life Cycle CO2 Emission Assessment for Non-Steam Curing Precast Concrete Medium Density Particleboard with Addition of Impregnated Paper Utilization of Terahertz Spectroscopy for Optical Behavior Determination of Recycled Modified HDPE Ionizing Radiation Effect of HDPE Measured by Nano-Hardness Creep of Radiation Cross Linked HDPE at Elevated Temperature Multilayer Medium Density Particleboard Using Castor Oil-Based Polyurethane Resin and Hevea Brasiliensis Wood Evaluating the Effect of PCD & TialN Coated Carbide End Mill's Rake Angle on Machinability of Titanium Alloy Ti-6Al-4V Hydrolyzed Fish Collagen Inhibits Inflammatory Cytokines Secretion in Lipopolysaccharide-Induced HUVECs New Insight Technique for Synthesis of Silica Gel from Rice Husk Ash by Using Microwave Radiation Toughness Enhancement of Polylactic Acid by Employing Glycolyzed Polylactic Acid-Cured Epoxidized Natural Rubber Alloying of Molybdenum Disilicide with Aluminum by SHS Corrosion of Inconel 625 at 600-800 DegreesC in N2/H2O/H2S Atmospheres Influence of Thermo-Chemical Treatment on the Surface of CP Titanium Microstructural Behaviors of Boron Modified LCB Titanium Alloy Compatibilization of Thermoplastic Polyurethane and Polypropylene with a SEBS Compatibilizer Strength of Bonded Joints of Linear Low - Density Polyethylene after Radiation Cross - Linking Three-Dimensional Periodic Hematite Photocatalysts Fabricating by Direct Writing Method Electrical Discharge Grinding (EDG) of Polycrystalline Diamond - Effect of Machining Polarity Study of Degradation of Fiber - Cement Plates with Different Types of Non - Metalic Fibers Influence of Mould Release Agent on Surface Properties of Concrete with Special Matrix Analysis of Formation and Testing of Efflorescence on Concrete Elements Preparation of Iron Catalysts Generated from Fe-Coagulated Sludge Produced by Ferric Chloride Coagulation of Wastewater Effect of Liquefying Agents Mixed with Lower Alcohols and Catalyst on the Microwave Driven Liquefaction of Wood Polarization Behavior of Steel Corrosion in Laterite, Yellow Soil and Kaolin A Fundamental Study on the Processing of Heavy Metals Contained in Underground Water by Composite Modulation Electromagnetic Field Processing Anti-Corrosive Performances of Environmental Friendly Materials on Al-Mg-Si Alloy 3-Dimensional Porosity in Electroless Ni-YSZ Composite Coating Acid Value Reduction Process in Mixed Crude Palm Oil by Using Low-Grade Ethanol The Synthesis and Properties of Emulsion Copolymerization of Styrene with N-Substituted Phenyl Maleimide Evaluations of Performance and Thermal Properties in Porous Asphalt Concrete Containing Steel Slag Determination of OSB Wood Composites with Resin Derived from a Renewable Natural Resource Contribution of Electrostriction in Polyurethane/Polyaniline Blends The Research of Concrete Sealer Penetrating Depths Influence of the Electrodeposited Co-Fe Alloys' Characteristics on their Magnetic Properties Synthesis and Crystal Structure Studies on 6-Amino-5,5,7-Tricyano-3,3a,4,5-Tetrahydro-2H-Indene-4-Spirocyclopentane Finite Difference Kinetics Modeling for Galvanized Steels with Post Heat Treatments Diffusion Coefficient of Nickel in Ni2Al3 Intermetallic Compound Effect of Cr Plating and Plasma Nitriding on Hardness and Corrosion Resistance of H13 Steel Phase Field Simulations of Dendritic Crystal Growth with Focus on the Computational Efficiency Experience of Replacing Basalt Aggregate by Limestone's in Porous Asphalt Concrete Ocimum americanum L. Essential Oil Exhibits Antimicrobial Activity Against Oral Bacteria Related to Periodontal Disease Lamellar Liquid Crystalline Materials Modulated by 1-Ethyl-3-Methylimidazolium Hexafluorophosphate Development of Effective Technique for Irradiating Samples of Thin Films Using the Focused Ion Beam Preparation and Characterization of Matrimid-Based Carbon Membrane Supported on Tube for CO2 Separation Determination of Nonlinear Refractive Index and Two-Photon Absorption Coefficients of New Nanocomposite Materials Based on Biosilicates Using Z-Scan Method Effect of the Reduction Temperature on Nickel Phosphide Catalyst Structure and Catalytic Activity for Hydrodesulfurization An Investigation of Fluoride Release from Orthodontic Elastomeric Ligatures Comparative Study of the Synthesis Condition for Orthodontic Polymethylmethacrylate Powder Effect of Interchanging Liquid Components of Two Auto-Polymerizing Orthodontic Acrylic Resins in their Flexural Properties The Distinguishing Quality of Water Droplets on Insulating Surface under AC and DC Electric Field Stress Increasing User Comfort for Public Seating - User Interaction with Materials Research on Selective Reduction of Laterite Nickel Ore by CO2/H2 Mixed Gas Hyperpressed Calcium Sulfate Dihydrate Structure Investigation of Interaction Effects of Environmental Conditions on Improvement of Zn Heavy Metal Adsorption Mechanism by Na-Nano Bentonite On the Structural and Optical Properties of Lead Selenide Nanolayers On Pretreatment Experimental Study of Yunnan Phosphorus Building Gypsum Oil Production from Polyethylene Plastics by Thermal Pyrolysis Using a Reflux Condenser Chapter 3: Civil and Structural Engineering Experimental Research of New Tram Track Construction Operating Fatigue Capacity Bridge Fire Risk Assessment on the Highway in South Korea Vertical Anchor Bolt Performance Finite Element Analysis of Modular Road Slab Finite Element Analysis of Reinforce RC Beams Considering Loading History with Pre-Stressed CFRP Sheets Study of Bridge Piers Lateral Stiffness in Railway Vehicle-Bridge System Buckling Behavior of Catheter Reinforced with Braids under Combined Loading of Axial Compression and Torsion: Effect of Displacement Speed on Buckling Region under Proportional Deformation Path New Bolted End-Plate Connection Design The Key Technology Research of the Pushing Closure Process about Jiashao Bridge Based on Geometric Control Method Vibration and Load Suppression of Offshore Floating Wind Turbine Model of Two-Link Planar Robot on SimulationX Behavior and Design Recommendations of Splice Connection in Weak-Axis Column-Tree Steel Moment Frames Seismic Performance Evaluation on Cyclic Testing of Weak-Axis Column-Tree Connections Simulation of Interference Characteristics of the Model Supporting Beams with Different Forms of Section in Wind Tunnel Test Aeroelastic Vibration of Super-Tall Buildings Time History Analysis of Steel Tall Buildings Coherence of Fluctuating Wind Speed and Along-Wind Force Power Spectrum of Tall Building Comprehensive Evaluation and Analysis of Water-Inrush Source in Wolonghu Coal Mine Weight-in-Motion-Based Ambient Truck Characteristic Identification in Highway Bridges Reinforced Concrete Deep Beams with Openings Strengthened Using FRP - A Review Eigenvector Centrality Measurement Using Patent Information of Wind Power Energy Effect of Loading Frequency on Fatigue Life of Extended Hollobolt in Concrete Filled Hollow Section Numerical Simulation of Galloping for Iced Quad-Bundled Conductor Pressure Transient Modeling in Geothermal Reservoir by Using Picard-McLaurin Iteration The Performance of a Vertical Well Subject to Edge Water Drive Analytical Models for Determining Rotational Capacity of Clip-Angle Connections under Seismic Loading Evaluation of Noise Characteristics of Drainage and Water Supply Systems in Apartment Bathrooms Study on the Influence of Different Supporting Point Stiffness on External Suspension Tower Crane and Supporting Structure Effects of Fibres on Improvement the Cracking in Concrete Slabs The Determination of Frost Resistance on Ultra High Performance Concrete Development of Materials Used in Pedestrian Bridges Study on the Influence of Different Strut and Beam's Stiffness on the Horizontal Force of the Tower Crane Supporting Structure Durability Quality Research of Cement Mortar Containing Solar PV Cells Strength Quality Research of Cement Mortar Blended with Solar PV Cells Insulation Systems and Green Sustainable Construction Soil Grouting as Seismic Liquefaction Countermeasure Fuzzy Set Approach in the Fatigue Damage Analysis of Composite Structures Chapter 4: Other Related Topics Diversity Measurement of Fuel Cell Field Using Patent Information Modelling and Characterization of Planar Components Development of Automatic Corner Stone Trimming Working Machine for Boundary Stones Analysis on the Application of PV Technology in Terms of Tranditional Roof House. Case Study: Julang Ngapak Sundanese Traditional Roof Form A Study on the Deduction of Major Construction Wastes in Construction Phase through Environmental Impact Assessment Assessment of GHG Emission Reduction Performance for Certification Criteria of Korea Green Building Scheme (G-SEED) - Focusing on Materials and Resources Category - Analysis of CO2 Emission in the Waste Disposal Process Based on Computation of Construction Waste The Origins of Nanotechnology in Latvia Deciding the Recycling Progress of Refrigerator Compressor Based on Naive Bayes Ambient Energy Harvesting for Wireless Sensor Nodes: A Review Energy Performance Analysis on the Design Conditions of High-Rise Apartment Houses in South Korea Fast Transmission Schemes in Substation Automation System Monitoring and Fault Identification in Aeronautical Structures Using an ARTMAP-Fuzzy-Wavelet Artificial Neural Network Analysis of Structural Integrity of a Building Using an Artificial Neural Network ARTMAP-Fuzzy-Wavelet Research on Anti-Windup Controller of Autonomous Navigation Vehicle Based on Improved Adaptive Filter Experimental Investigation of Thermoelectric Power Generation Using Radiative Heat Exchange Product Data Management Systems as a Tool in Engineering Change Management Modeling Interior Environment of Historical Building and Determination of Critical Places for Application of Nanotextiles Protection Augmented Reality Aided Control of Industrial Robots Researches on the Chaotic Characteristics of Fluctuating Pressure in Slit-Type Energy Dissipater A Study on Proposal of Environmental Assessment Method in Materials and Resource Category of Korea Green Building Certification Control Instability Applied to a Micro Electro Mechanical Actuator System (MEMS) Advanced Methods of Three Dimensional Data Obtaining for Virtual and Augmented Reality

by "Nielsen BookData"

Related Books: 1-1 of 1

Details

  • NCID
    BB17778107
  • ISBN
    • 9783038352549
  • Country Code
    sz
  • Title Language Code
    eng
  • Text Language Code
    eng
  • Place of Publication
    Pfaffikon
  • Pages/Volumes
    2 v. (1186 p.)
  • Size
    24 cm
  • Parent Bibliography ID
Page Top