Advanced materials, structures and mechanical engineering : selected, peer reviewed papers from the 2014 International Conference on Advanced Materials, Structures and Mechanical Engineering (ICAMSME 2014), May 3-4, 2014, Incheon, South-Korea
Author(s)
Bibliographic Information
Advanced materials, structures and mechanical engineering : selected, peer reviewed papers from the 2014 International Conference on Advanced Materials, Structures and Mechanical Engineering (ICAMSME 2014), May 3-4, 2014, Incheon, South-Korea
（Advanced materials research, v. 1025-1026）
Trans Tech Publications, c2014
- : [set]
- Part 1
- Part 2
Available at / 1 libraries
-
No Libraries matched.
- Remove all filters.
Note
Includes bibliographical references and indexes
Description and Table of Contents
Description
Collection of selected, peer reviewed papers from the 2014 International Conference on Advanced Materials, Structures and Mechanical Engineering (ICAMSME 2014), May 3-4, 2014, Incheon, South-Korea.
The 213 papers are grouped as follows:
Chapter 1: Applied Mechanics and Manufacturing Processes Engineering,
Chapter 2: Material Science and Technology,
Chapter 3: Civil and Structural Engineering,
Chapter 4: Other Related Topics.
Table of Contents
Preface
Chapter 1: Applied Mechanics and Manufacturing Processes Engineering
Particleboard Manufactured with Additions of Eucalyptus Bark in Different Percentages in the Internal Layer
Screening for Welding Defects Using Acoustic Emission Technique
Medium Density Particleboard (MDF) Produced with Pinus caribaea Fibers and Castor Oil Based Polyurethane Resin
Fatigue Evaluation of Trough Splice Joints in Orthotropic Steel Decks
Design of Pressurized Vaulted Rectangular Conduits Using the Rough Model Method (Part 2)
Thermo Elastohydrodynamic Lubrication with Liquid-Solid Lubricant
The Influence of the Production Process on Mechanical Properties of Rubber Testing Samples
Influence of Moisture Content in some Mechanical Properties of Two Brazilian Tropical Wood Species
Physical and Mechanical Properties of Dipteryxodorata (Aublet) Willd
Modelling of Fretting Wear under Partial Slip Conditions Using Combined Isotropic-Kinematic Hardening Plasticity Model
Modeling Errors in Coordinate Measuring Machines and Machine Tools Using Homogeneous Transformation Matrices (HTM)
Extraction and Thermal Processing of Beke Oil Sands
Influence of Storage Period of Pieces in Stiffness of Pinus elliottii Glulam Beams
The Cracking Mechanism and Anti-Cracking Measures for Hydraulic Mass Concrete
Approach to the Ear Plate and Round Steel Connection
Numerical Modelling of Nonlinear Vibration Isolation System Free Oscillations
Study about the Stone Curves and the Development of Polygonal Shape Cutting Device
About Verification of Discrete-Continual Finite Element Method for Two-Dimensional Problems of Structural Analysis Part 1: Deep Beam with Constant Physical and Geometrical Parameters along Basic Direction
About Verification of Discrete-Continual Finite Element Method for Two-Dimensional Problems of Structural Analysis Part 2: Deep Beam with Piecewise Constant Physical and Geometrical Parameters along Basic Direction
Fatigue Evaluation of Autofrettaged Thick-Walled Cylinders with a Radial Cross-Bore
Testing of Mechanical Protection of Data Distribution Mechanisms
Utilization of Mosaic Sludge Waste into Fired Clay Brick: Properties and Leachability
Experimental and Numerical Investigation on Flow Characteristics of a Water Jet Impingement
Structural Design and Improvement of Wind-Driven Generator Cooling System
A Ground Test Method and the Error Analysis of the Heat Exchanger in the Intake of Aircraft
Refined FEM Analysis of 1000MW Generator Stator during Integral Transportation on Railway
3D Ice Accretion Simulation for Complex Configuration Basing on Improved Messinger Model
Automatic Machine for Sorting Colored Objects with Conveyor Belt
Research into Fatigue Crack Life Characteristics of Bellows Operated under High-Frequency Load
Effect of Thermocycling on Shear Bond Strength of the Three No-Mixed Bonding Adhesives
Comparisons of the Mechanical Properties of 3 Commercial Brands of Non-Latex Orthodontic Elastics
Study on the Performance of an Open Loop Cycle CO2 Refrigeration System in the Extreme Limit Condition
Dynamic Characteristic Analysis of Hydraulic Servo System in a Mold Oscillating Mechanism
Evaluation of Longitudinal Modulus of Elasticity in Wood Species for Structural Application
Evaluating a Test Parameter in Static Bending for Pinus sp. Wood
The Influence of Different Carbon Type Fillers on the Mechanical and Physical Properties of Co-Extruded PP-Based WPC
Tensile Properties during Solidification of Aluminium Die Casting Alloys Grade ADC5, ADC6 and ADC12
Mechanical Property Improvement of Poly(Butylene Succinate) by Reinforcing with Modified Fumed Silica
Mechanical Properties of PLA/LLDPE Films Reinforced with Silica from Rice Husk
Effect of Wood Moisture Content in Edge Glued Panel Bonding for Furniture Industry: Analysis of Shear-Stress and Rupture in Bondline
Simulation Analysis of In-Service Bamboo and Pine EGP Composite Flooring
Characterization of Mechanical and Thermal Properties of PP/Mineral Composites
Use of Macadamia Nutshell in the Production of Eucalyptus Salign Particleboards
Effect of Ionizing Beta Radiation on the Strength of Bonded Joints of Polycarbonate
Temperature Stability of Modified PBT by Radiation Cross-Linking
Tensile Behaviour of Modified PBT by Radiation Cross-Linking
Influence of Recycled Irradiated HDPE on Mechanical Behavior of LDPE/Hdpex Blends
Creep Test Evalutation
Behavior of Recycled Material at Higher Temperature in Compression Test
Size Effect of Recycled Material to Tensile Properties of PC
Injection Molding of Rubber Compound Influenced by Injection Mold Surface Roughness
Particulate Composites with Wastes from Treated Wood and Tire Rubber
Effect of Linear Sliding Speed on Wear Behavior of Al2O3/TiC Ceramic Composite and Diamond Slicing Blade
Temperature Prediction at the Blow End of the Converter via Control Model
Wear Response of Composition-Modulated Multilayer Ni-W Coatings
Study of Weld Hardness of Pipes at Elevated Temperature Application in Power Plants
Cutting Ceramic Materials: Influence of Abrasive Machining and Coating Deposition on the Performance Potential
Effect of Temperature on Deactivation Force of Three Commercial NiTi Orthodontic Archwires
Comparison of Horizontal and Vertical Deactivation Force, Length and Superelasticity in Three Commercial NiTi Orthodontic Archwires
Stacking Design of Composite Laminate in Wheelchair Structure under Seat Loading
Self-Tapping Screws without Pre-Drilling for Brazilian Reflorestation Species
Optimization of Eutectic Si Particles Morphology in Secondary Al-Si Cast Alloys after Different Heat Treatment
Prognosis the Erosion-Corrosion Rates for Slurry Seawater Flow in Steel Pipeline Using Neural System
The Influence of Cross-Section Shape Changing on Work of Cold Formed Beam
The Dynamics Model Analysis of Drying Process in Gelcasting Method
New Method for Evaluating Dynamic Characteristics of Cantilever Spring of Vibration Sensor
Multiscale Model of Shape Rolling Taking into Account the Microstructure Evolution - Finite Element Modeling
Comparison of the Initial Repeated Bond Strength among Three Orthodontic Bonding Systems
Finite Element Analysis of the Fine Blanking Process for Seat Recliner Plate Holder of Recreation Vehicle
Effects of Al Additions and Reheat Treatments on Microstructures of Modified Nickel-Based Superalloy, Grade Inconel 738, by Vacuum Arc Melting Process
Chapter 2: Material Science and Technology
Effect of Beta Low Irradiation Doses on the Micromechanical Properties of Surface Layer of LDPE
Nanohardness of Electron Beam Irradiated HDPE
Effect of Beta Low Irradiation Doses on the Filled PA66 Measured by Micro-Indentation Test
Effect of the Calcination Temperature on Ni2P/TiO2-Al2O3 Catalyst Structure and Catalytic Activity for Hydrodesulfurization
Effect of Heat Treatment on Grain Growth of Beta Titanium Alloy
Frequency and Temperature Dependence of Dielectric Properties of Orthorhombic HoMnO3 Thin Films
Evaluation of Bamboo Particleboards Produced with Urea-Formaldheyde Resin
Physical Characterization of Particleboard Produced with Waste from Ethanol and Sugar Mill
Study the Effect of the Substitution of Ba with Pr in Barium Ferrite Powder on Magnetic Properties
Influence of Rate of Heating to Aging Temperature on Precipitation Hardening in a Metastable Titanium Alloy
Influence of Reactive Organic Flame Retardants on Properties of Resol Phenoplast Foams
New Nickel Based Superalloys Development by Vacuum Arc Melting Process Based on Aluminum Addition of GTD-111
Toughening of Poly(Lactic Acid) by Blending with Poly(Ethylene-co-Octene)
A Simple and Efficient Route for Preparing 4-Chloro-3,5-Dinitropyrazole
Sterilization of Oil Palm Fruits by Microwave Heating for Replacing Steam Treatment in Palm Oil Mill Process
Effects of Soybean Antioxidant Peptides (SAP) on SOD, GSH-Px, CAT Activity and MDA Levelin Vivo
Optimization Statistical Condition of Incubation for the Growth State of a Recombinant Strain Produced Alkaline Protease
Removal of Humic Material from Mineralized Algerian Water Using Alum and Local Clay as Coagulant Aid
Comparison Study of Oxidation Behavior of Copper at Elevated Temperatures
Analysis of Structural Transformations of Fe80Ni10Si5B5 Amorphous Alloy Based on Temperature Changes of Electrical Resistivity
Comparison Study of Oxidation Behavior of Low Carbon Steel at Elevated Temperatures
Synthesis of Vanadium Powder by Magnesiothermic Reduction
Hydrothermal Synthesis of Porous Materials Using Calcined Kaolin with Small Molecular Amine Templates
Nickel Recycling by Magnesium Reaction of Fe-Ni Alloy Scrap
Effect of ZnO Nanoparticles Synthesized by Precipitation Method on Cure Characteristics and Morphology of EPDM Foam
Exhaust Dyeing Poly(Lactic Acid) Fabrics with Indigo Dye Obtained from Indigofera Tinctoria
Experimental Study on the Thermal Conductivity of Thermal Insulation Materials Used in Residential Buildings
Life Cycle CO2 Emission Assessment for Non-Steam Curing Precast Concrete
Medium Density Particleboard with Addition of Impregnated Paper
Utilization of Terahertz Spectroscopy for Optical Behavior Determination of Recycled Modified HDPE
Ionizing Radiation Effect of HDPE Measured by Nano-Hardness
Creep of Radiation Cross Linked HDPE at Elevated Temperature
Multilayer Medium Density Particleboard Using Castor Oil-Based Polyurethane Resin and Hevea Brasiliensis Wood
Evaluating the Effect of PCD & TialN Coated Carbide End Mill's Rake Angle on Machinability of Titanium Alloy Ti-6Al-4V
Hydrolyzed Fish Collagen Inhibits Inflammatory Cytokines Secretion in Lipopolysaccharide-Induced HUVECs
New Insight Technique for Synthesis of Silica Gel from Rice Husk Ash by Using Microwave Radiation
Toughness Enhancement of Polylactic Acid by Employing Glycolyzed Polylactic Acid-Cured Epoxidized Natural Rubber
Alloying of Molybdenum Disilicide with Aluminum by SHS
Corrosion of Inconel 625 at 600-800 DegreesC in N2/H2O/H2S Atmospheres
Influence of Thermo-Chemical Treatment on the Surface of CP Titanium
Microstructural Behaviors of Boron Modified LCB Titanium Alloy
Compatibilization of Thermoplastic Polyurethane and Polypropylene with a SEBS Compatibilizer
Strength of Bonded Joints of Linear Low - Density Polyethylene after Radiation Cross - Linking
Three-Dimensional Periodic Hematite Photocatalysts Fabricating by Direct Writing Method
Electrical Discharge Grinding (EDG) of Polycrystalline Diamond - Effect of Machining Polarity
Study of Degradation of Fiber - Cement Plates with Different Types of Non - Metalic Fibers
Influence of Mould Release Agent on Surface Properties of Concrete with Special Matrix
Analysis of Formation and Testing of Efflorescence on Concrete Elements
Preparation of Iron Catalysts Generated from Fe-Coagulated Sludge Produced by Ferric Chloride Coagulation of Wastewater
Effect of Liquefying Agents Mixed with Lower Alcohols and Catalyst on the Microwave Driven Liquefaction of Wood
Polarization Behavior of Steel Corrosion in Laterite, Yellow Soil and Kaolin
A Fundamental Study on the Processing of Heavy Metals Contained in Underground Water by Composite Modulation Electromagnetic Field Processing
Anti-Corrosive Performances of Environmental Friendly Materials on Al-Mg-Si Alloy
3-Dimensional Porosity in Electroless Ni-YSZ Composite Coating
Acid Value Reduction Process in Mixed Crude Palm Oil by Using Low-Grade Ethanol
The Synthesis and Properties of Emulsion Copolymerization of Styrene with N-Substituted Phenyl Maleimide
Evaluations of Performance and Thermal Properties in Porous Asphalt Concrete Containing Steel Slag
Determination of OSB Wood Composites with Resin Derived from a Renewable Natural Resource
Contribution of Electrostriction in Polyurethane/Polyaniline Blends
The Research of Concrete Sealer Penetrating Depths
Influence of the Electrodeposited Co-Fe Alloys' Characteristics on their Magnetic Properties
Synthesis and Crystal Structure Studies on 6-Amino-5,5,7-Tricyano-3,3a,4,5-Tetrahydro-2H-Indene-4-Spirocyclopentane
Finite Difference Kinetics Modeling for Galvanized Steels with Post Heat Treatments
Diffusion Coefficient of Nickel in Ni2Al3 Intermetallic Compound
Effect of Cr Plating and Plasma Nitriding on Hardness and Corrosion Resistance of H13 Steel
Phase Field Simulations of Dendritic Crystal Growth with Focus on the Computational Efficiency
Experience of Replacing Basalt Aggregate by Limestone's in Porous Asphalt Concrete
Ocimum americanum L. Essential Oil Exhibits Antimicrobial Activity Against Oral Bacteria Related to Periodontal Disease
Lamellar Liquid Crystalline Materials Modulated by 1-Ethyl-3-Methylimidazolium Hexafluorophosphate
Development of Effective Technique for Irradiating Samples of Thin Films Using the Focused Ion Beam
Preparation and Characterization of Matrimid-Based Carbon Membrane Supported on Tube for CO2 Separation
Determination of Nonlinear Refractive Index and Two-Photon Absorption Coefficients of New Nanocomposite Materials Based on Biosilicates Using Z-Scan Method
Effect of the Reduction Temperature on Nickel Phosphide Catalyst Structure and Catalytic Activity for Hydrodesulfurization
An Investigation of Fluoride Release from Orthodontic Elastomeric Ligatures
Comparative Study of the Synthesis Condition for Orthodontic Polymethylmethacrylate Powder
Effect of Interchanging Liquid Components of Two Auto-Polymerizing Orthodontic Acrylic Resins in their Flexural Properties
The Distinguishing Quality of Water Droplets on Insulating Surface under AC and DC Electric Field Stress
Increasing User Comfort for Public Seating - User Interaction with Materials
Research on Selective Reduction of Laterite Nickel Ore by CO2/H2 Mixed Gas
Hyperpressed Calcium Sulfate Dihydrate Structure
Investigation of Interaction Effects of Environmental Conditions on Improvement of Zn Heavy Metal Adsorption Mechanism by Na-Nano Bentonite
On the Structural and Optical Properties of Lead Selenide Nanolayers
On Pretreatment Experimental Study of Yunnan Phosphorus Building Gypsum
Oil Production from Polyethylene Plastics by Thermal Pyrolysis Using a Reflux Condenser
Chapter 3: Civil and Structural Engineering
Experimental Research of New Tram Track Construction Operating Fatigue Capacity
Bridge Fire Risk Assessment on the Highway in South Korea
Vertical Anchor Bolt Performance Finite Element Analysis of Modular Road Slab
Finite Element Analysis of Reinforce RC Beams Considering Loading History with Pre-Stressed CFRP Sheets
Study of Bridge Piers Lateral Stiffness in Railway Vehicle-Bridge System
Buckling Behavior of Catheter Reinforced with Braids under Combined Loading of Axial Compression and Torsion: Effect of Displacement Speed on Buckling Region under Proportional Deformation Path
New Bolted End-Plate Connection Design
The Key Technology Research of the Pushing Closure Process about Jiashao Bridge Based on Geometric Control Method
Vibration and Load Suppression of Offshore Floating Wind Turbine
Model of Two-Link Planar Robot on SimulationX
Behavior and Design Recommendations of Splice Connection in Weak-Axis Column-Tree Steel Moment Frames
Seismic Performance Evaluation on Cyclic Testing of Weak-Axis Column-Tree Connections
Simulation of Interference Characteristics of the Model Supporting Beams with Different Forms of Section in Wind Tunnel Test
Aeroelastic Vibration of Super-Tall Buildings
Time History Analysis of Steel Tall Buildings
Coherence of Fluctuating Wind Speed and Along-Wind Force Power Spectrum of Tall Building
Comprehensive Evaluation and Analysis of Water-Inrush Source in Wolonghu Coal Mine
Weight-in-Motion-Based Ambient Truck Characteristic Identification in Highway Bridges
Reinforced Concrete Deep Beams with Openings Strengthened Using FRP - A Review
Eigenvector Centrality Measurement Using Patent Information of Wind Power Energy
Effect of Loading Frequency on Fatigue Life of Extended Hollobolt in Concrete Filled Hollow Section
Numerical Simulation of Galloping for Iced Quad-Bundled Conductor
Pressure Transient Modeling in Geothermal Reservoir by Using Picard-McLaurin Iteration
The Performance of a Vertical Well Subject to Edge Water Drive
Analytical Models for Determining Rotational Capacity of Clip-Angle Connections under Seismic Loading
Evaluation of Noise Characteristics of Drainage and Water Supply Systems in Apartment Bathrooms
Study on the Influence of Different Supporting Point Stiffness on External Suspension Tower Crane and Supporting Structure
Effects of Fibres on Improvement the Cracking in Concrete Slabs
The Determination of Frost Resistance on Ultra High Performance Concrete
Development of Materials Used in Pedestrian Bridges
Study on the Influence of Different Strut and Beam's Stiffness on the Horizontal Force of the Tower Crane Supporting Structure
Durability Quality Research of Cement Mortar Containing Solar PV Cells
Strength Quality Research of Cement Mortar Blended with Solar PV Cells
Insulation Systems and Green Sustainable Construction
Soil Grouting as Seismic Liquefaction Countermeasure
Fuzzy Set Approach in the Fatigue Damage Analysis of Composite Structures
Chapter 4: Other Related Topics
Diversity Measurement of Fuel Cell Field Using Patent Information
Modelling and Characterization of Planar Components
Development of Automatic Corner Stone Trimming Working Machine for Boundary Stones
Analysis on the Application of PV Technology in Terms of Tranditional Roof House. Case Study: Julang Ngapak Sundanese Traditional Roof Form
A Study on the Deduction of Major Construction Wastes in Construction Phase through Environmental Impact Assessment
Assessment of GHG Emission Reduction Performance for Certification Criteria of Korea Green Building Scheme (G-SEED) - Focusing on Materials and Resources Category -
Analysis of CO2 Emission in the Waste Disposal Process Based on Computation of Construction Waste
The Origins of Nanotechnology in Latvia
Deciding the Recycling Progress of Refrigerator Compressor Based on Naive Bayes
Ambient Energy Harvesting for Wireless Sensor Nodes: A Review
Energy Performance Analysis on the Design Conditions of High-Rise Apartment Houses in South Korea
Fast Transmission Schemes in Substation Automation System
Monitoring and Fault Identification in Aeronautical Structures Using an ARTMAP-Fuzzy-Wavelet Artificial Neural Network
Analysis of Structural Integrity of a Building Using an Artificial Neural Network ARTMAP-Fuzzy-Wavelet
Research on Anti-Windup Controller of Autonomous Navigation Vehicle Based on Improved Adaptive Filter
Experimental Investigation of Thermoelectric Power Generation Using Radiative Heat Exchange
Product Data Management Systems as a Tool in Engineering Change Management
Modeling Interior Environment of Historical Building and Determination of Critical Places for Application of Nanotextiles Protection
Augmented Reality Aided Control of Industrial Robots
Researches on the Chaotic Characteristics of Fluctuating Pressure in Slit-Type Energy Dissipater
A Study on Proposal of Environmental Assessment Method in Materials and Resource Category of Korea Green Building Certification
Control Instability Applied to a Micro Electro Mechanical Actuator System (MEMS)
Advanced Methods of Three Dimensional Data Obtaining for Virtual and Augmented Reality
by "Nielsen BookData"
