Advances in chemical engineering and advanced materials IV : selected, peer reviewed papers from the 4th International Conference on Chemical Engineering and Advanced Materials (CEAM 2014), August 9-10, 2014, Shenzhen, China
著者
書誌事項
Advances in chemical engineering and advanced materials IV : selected, peer reviewed papers from the 4th International Conference on Chemical Engineering and Advanced Materials (CEAM 2014), August 9-10, 2014, Shenzhen, China
（Advanced materials research, v. 1033-1034）
Trans Tech Publications, c2014
- : [set]
- Part 1
- Part 2
大学図書館所蔵 件 / 全1件
-
該当する所蔵館はありません
- すべての絞り込み条件を解除する
注記
Includes bibliographical references and indexes
内容説明・目次
内容説明
Collection of selected, peer reviewed papers from the 4th International Conference on Chemical Engineering and Advanced Materials (CEAM 2014), August 9-10, 2014, Shenzhen, China.
The 272 papers are grouped as follows:
Chapter 1: Fine Chemicals and Specialty Chemicals,
Chapter 2: Catalysts and Catalytic Reaction,
Chapter 3: Energy Chemical Engineering and New Energy Development,
Chapter 4: Biological Chemistry, Chemical Pharmaceuticals, Chemical Biology and Medicinal Chemistry,
Chapter 5: Waste Treatment, Clean Production, Environmental Chemicals and Environmental Protection,
Chapter 6: Chemical Instrumentation, Measurement and Testing Technology,
Chapter 7: Theoretical and Computational Chemistry,
Chapter 8: Analytical Chemistry and Methodologies,
Chapter 9: Food Chemistry and Food Engineering,
Chapter 10: Metal Materials and Alloys,
Chapter 11: Composites,
Chapter 12: Polymer Materials,
Chapter 13: Micro / Nano Materials and Technologies,
Chapter 14: Optical/Electronic/Magnetic Materials,
Chapter 15: New Functional Materials and Improved Properties Materials,
Chapter 16: Surface Engineering and Coating,
Chapter 17: Materials Processing Technologies and Joint,
Chapter 18: Manufacturing, Machinery and Equipment Design, Applications,
Chapter 19: Computer Applications and Mathematical Modeling,
Chapter 20: Engineering Education.
目次
Preface and Conference Organization
Chapter 1: Fine Chemicals and Specialty Chemicals
A New Method for Synthesis of Iron Phthalocyanine
A New Technological Study on Synthesis of Bis(2-chloroethoxy)Methane
Computing Method and Test on IC50 Value of Tyrosinase Inhibition
Reduction of Aromatic Nitro Compounds to Azoxy Compounds with Sodium Borohydride
Some Key Problems Encountered for Demulsifier Research
Synthesis and Properties of Anionic Maleic Monoester Carboxylate Polymeric Surfactants
Synthesis of Amyl Ferulate Catalyzed by Sodium Bisulfate Supported by Silica
Synthesis of the Hydrogel Polyurethane
Synthesis of 3-O-Caffeoyl-Quinide Catalyzed by p-Toluenesulfonic Acid
Determination of Rhodium in Waste Thiourea Rhodium Samples Using Teflon Pressure Vessel-Assisted Sample Digestion and ICP-OES
Chapter 2: Catalysts and Catalytic Reaction
An Efficient Solvent-Free Synthesis of Bis(2-Tetrahydrobenzofuranyl)Alkanes Catalyzed by H2SO4*SiO2
Determination of Rhodium in Rhodium-Loaded Carbon Catalysts Using Microwave-Assisted Sample Digestion and ICP-OES
Liquid Phase Hydrogenation of Maleic Anhydride over Ni Catalysts: Effect of Support on the Catalytic Performance
Liquid-Phase Catalytic Oxidation of Styrene by a Fiber-Supported Copper(II) Complex with High Catalytic Performance
Oxidative Desulfurization of Dibenzothiophene Catalyzed by Polyoxometalate-Based Ionic Liquid
Studies on Synthesis and Properties of Hydrophobic Bronsted Acidic Ionic Liquid
Synthesis of 2,2,4-Trimethyl-1,3-Pentanediol Monoisobutyrate
Synthesis of Three Different Types of Chalcone Derivatives
Ultrasound-Assisted Oxidative Desulfurization of Diesel Fuel in H2O2/Heteropoly Acid/Solvent System
Effect of Preparation Methods on Ti-PILCs Catalysts in Selective Catalytic Reduction of NO by Propylene
Effect of Templates on Catalytic Activity of Ordered Mesoporous Ceria for CO Oxidation
Chapter 3: Energy Chemical Engineering and New Energy Development
Degradation of Rice Straw with Dilute Hydrochloric Acid
Effect of Adding Cattle Dung on the Slurry Ability of Biomass Coal-Water Slurry
Effects of Al-Doping on the Thermoelectric Properties of ZnO:Al Thin Films
Effects of Dilute Alkali Pretreatment on Chemical Components and Fermentable Sugars and Structure of Bamboo
Fourier Transform Infrared Spectroscopic Analysis of the Raw and Tectonic Coals Extracts with Ultrasonic
Li2MnSiO4/C Composite with Ascorbic Acid as Carbon Source for Lithium Ion Batteries
Reduce Cold Filter Plugging Point and Kinematic Viscosity of Cottonseed-Based Biodiesel Fuel
Study on the Fermentation Conditions of -Glucosidase from Aspergillus niger
Viscosity-Temperature Characteristic of Biodiesel Derived from Pistacia Chinensis Oil
Comparative Study on Microwave Co-Pyrolysis Products of Low Rank Coal in CO2 and N2 Atmosphere
Energy Consumption Analysis of Air Separation Process for Oxy-Fuel Combustion System
Microwave-Assisted Organic Acid Hydrolysis of Corncob in Bioethanol Production
Syntheses of Fe3O4 and Fe3O4/Graphene Composites and Electrochemical Properties Researches as Anodes for Lithium Ion Batteries
Research on Influencing Factor of Performance Ability of Emulsion Explosive
Relationship between the Property of Cloud Point and CO2 Absorption and Desorption of Amines
By Using FE-Fe2O3 Galvanic Pair in Sulphate Solution for Obtaining of a Chemical Source of a Current
Chapter 4: Biological Chemistry, Chemical Pharmaceuticals, Chemical Biology and Medicinal Chemistry
A New Method to Identify Pulsatilla chinesis(Bge) Regel, from Potentilla chinesis Ser. Based on Chloroplast trnL-F Sequences
A New Method to Identify Pulsatilla chinesis(Bge) Regel, from Potentilla chinesis Ser. Based on ITS Sequences
Alkaline Delignification of Banana Peel for Producing Pulp
Analysis on Change of Nutritional Ingredients in Ensiling Process of Pineapple Leaf Residue
Biosynthesis of -Decalactone with Lipase-Catalyzed Resolution from Castor Oil by Saccharomyces cerevisiae
Chemical Characterization of the Essential Oils of Eucalyptus.grandisxEucalyptus.urophylla Hybrids and Six Pure Eucalyptus species Grown in Guangxi (China)
Difference in Physicochemical Property of -Glucan from Barley Flour and Bran
Effect of DTPMPA on Bamboo Kraft Pulping
Effect of GDM on the Expression of MT1-MMP and u-PA in Glioma Cells
Effect of Geldanamycin on the Glioma Cell Invasion Induced by Hepatocyte Growth Factor
Enhanced Membrane Permeability of Saccharomyces cerevisiae Induced by Dielectric Barrier Discharge Plasma at Atmospheric Pressure
Expression and Significance of Interleukin 1 mRNA in Colorectal Cancer
In Vitro Antibacterial Activity of Different Polar Solvent Extracts from Oxalis
Mechanistic Basis for the Role of Binary Mixtures Flowability and Related Factors in the Processability and Performance of High Shear and Extrusion Granulation
Preparation of pH-Sensitive Aqueous P(MAA-co-EA) Copolymers and Application in Omeprazole Capsules
Purification of Ferulic Acid, Senkyunolide I and Senkyunolide H from the Volatile Oil of Rhizoma chuanxiong Using High-Speed Countercurrent Chromatography and Preparative Liquid Chromatography
Role of Main Physical Properties in Granule Yield of Andrographis Extract Mixtures in the High Shear Granulation
Site-Directed Mutagenesis of a Neutral Phytase from Bacillus amyloliquefaciens: Influencing Activity and Stability
Studies on the Chemical Constituents of Chloranthus henryi
Synthesis and Biological Activities of 1,2,4-Triazine Derivatives
Terpenoids from Chloranthus multistachys
The Antimicrobial Activity of Fructuskochiae Ethanol Extract and its Impact on the Rheological Properties of the Shampoo
The Study of Senkyunolide I Degradation Products by Ultra-High Performance Liquid Chromatography-Quadrupole Time-of-Flight Mass Spectrometry
The Synthesis of Poly- -Hydroxybutyrate by Moderately Halophilic Bacteria Halomonas venusta
Microwave Assisted Synthesis of Isoquercitrin Using Enzymatic Hydrolysis of Rutin
Preparation of Compound Danshen Micropowder Tablets and Comparative Study of Pharmacokinetics with Compound Danshen Extraction Tablets
Study on Synthesis of a Series of Hydroxyl Functional Cholesterylated Hepatic Targeting Liposome Ligands
Study on Synthesis of a Series of Amino Functional Cholesterylated Hepatic Targeting Liposome Ligands
A Comparison Study on Microwave-Assisted Extraction of Catalpol from Rehmannia glutinosa Libosch with Conventional Methods
Analysis of Volatile and Semivolatile Components in Marsdeniae tenocissimae by Gas Chromatography-Mass Spectrometry
Synthesis and Photophysical Properties of Iridium(III) Complex with Cyclometalated Styrylbenzothiazole Ligand
Synthesis and Properties of the Cassava Starch Succinate
Synthesis and Swelling Behavior of Biodegradable Cellulose-Based Hydrogels
Chapter 5: Waste Treatment, Clean Production, Environmental Chemicals and Environmental Protection
A Study on Pyrolysis of Waste Printed Circuit Boards in a Batch Reactor
Adsorption Mechanism of Sodium Dodecyl Sulfate on Coagulating Precipitate in Treatment of Vat Dark Blue BO by Coagulation and Air-Flotation
Advance of Sludge Producing, Hazards and Disposal Methods
Application Research on Cleaner Production Auditing in Papermaking Enterprise
Fenton Oxidation of Different Molecular Weights Polyethylene Glycols in Wastewater
Optimization of the Adsorption Condition for Wastewater Containing Chromium Treatment by Natural Adsorbent Material Using Response Surface Methodology
Removal of Uranium(VI) by Humic-Reducing Bacteria
Study on the Decomposition of the Tungsten Residue Using Concentrated Hydrochloric Acid by Reflux Method
Synthesis of NaY Zeolite and their CO2 Adsorption Properties
The Research of Slurry Foaming of Wet Flue Gas Desulfurization System of Steel Works
Steady Seepage Analysis of the Filled Channel Slope with Anisotropy
Effect of Polymerization Time on the Pore Size Distribution and Adsorption Behavior of Ordered Mesoporous Carbons
Synthesis of Amino Propionic Acid Modified Polypropylene-Graft-Styrene Fiber
Chapter 6: Chemical Instrumentation, Measurement and Testing Technology
An Host-Guest Electrochemical Sensor for DNA Ligase Detection
Measurement of Therapeutic Proton Beam Using a Fiber-Optic Cerenkov Radiation Sensor
Study of a Novel Honeycomb Continuous Flocculator
Study on Identification of 100% Cotton Fabric by Raman Spectroscopy and Random Forest
Influence of Distance from Blast Center on Time-Frequency Characteristics of Blast Vibration Signals
A Design of Optical Filter Based on Conjugate Interference
Electrocatalytic Performance of PbNP-MWCNTs Composite Electrode toward Glucose
Evaluation of Molecular Scale in ASP Flooding Produced Liquid
Finite Element Simulation and Experimental Analysis of O-P Hardness
Effects of Different Kinds of Supporting Electrolyte on the Electrochemical Test of T501
Washing Method of Laboratory Glassware
Chapter 7: Theoretical and Computational Chemistry
Activation of Molten Alkali Chloroaluminates
Evolution and Simulation of Pore Structure during the Calcinations of Limestone Pellets
Influence of Bivalent Ion on Oil/Water Interfacial Properties
Mesoscopic Dynamic Simulations of Poly (Methyl Methacrylate) and Poly (Ethylene Oxide) Blends
Molecular Dynamic and Mesoscopic Dynamic Simulations for Polymer Blends
The Calculating Benchmark Selection and its Skills in Chemical Engineering Calculation
Theoretical Study of the Reagent Rotational Excitation Dependence for the Reactions Li + TF (v=0, j=0-5) LiF + T
Process Mineralogy Study of a Refractory Mixed Copper Ore
Parameter Study of Numerical Analysis on Low-Velocity Impact of GLARE 5 Fibre-Metal Laminates
Chapter 8: Analytical Chemistry and Methodologies
Combined Determination of Phosphorus and Arsenic in Molybdenum Concentrate by Molybdenum Blue Spectrophotometric Method
Construction of Chiral Hydroxyl of the Intermediate of Strictifolione by Using Evans Auxiliary
Determination of 4 Kinds of Estrogenic Compound in Fish Samples Using Solid Phase Extraction and High Performance Liquid Chromatography
Determination of Cyromazine and Melamine Based on Capillary Electrophoresis Coupled with Electrogenerated Chemiluminescence at Gold Nanoparticles Modified Electrode
Eelectrochemical Detection of Bisphenol-A Based on Electrospun Ag/PAN Nanofibers
Effective Hydroalkoxylation/Cyclization of Alkynyl Alcohol Catalyzed by In(OTf)3
Graphene Oxide-Reinforced Hollow Fiber Solid-Phase Microextraction Coupled with HPLC for the Determination of Parabens in Beer
Spectrophotometric Determination of Isoniazid in Pharmaceutical Sample by Silicomolybdenum Blue
Study on Synthesis of 6-Bromo-2, 3-Dihydroxybenzaldehyde
Study on Synthesis of Tert-Butyl(4R)-4-(Methoxymethylcarbamoyl)-2,2-Dimethylthiazolidine-3- Carboxylate
Synchronous Determination of Copper, Iron, Nickel, Lead, Cadmium and Chromium in Electroplating Wastewater by ICP-AES
Synthesis of (5R,7R)-Methyl3,5-Dihydroxy-7-((4-Methoxybenzyl)Oxy)Octanoate
Synthesis of the Key Intermediate of (+)-(6S,2'R)-Cryptocaryalactone
Synthetic Study towards Aculeatin A and B
Synthetic Study towards Salvianolic Acid A: Synthesis of the Intermediate of (3, 4-Bis((Tert-Butyldimethylsilyl)Oxy)-Benzylidene)Triphenylphosphorane
Synthetic Study towards the Total Synthesis of (+)-(6S,2'R)-Cryptocaryalactone
Improvement on Determination of the Adsorption Value of Activated Carbon on Methylene Blue
Pressure-Induced Cationic Disordering in Pyrochlore Oxides (La1-xCex)2Zr2O7 and Enhancement of Compressibility
Synthesis and Crystal Structure of an Oxovanadium(IV) Complex Containing L-Phenylalanine Schiff Base and 1,10-Phenanthroline
Study on Synthesis of (R)-Tert-Butyl Benzyl(1-((Tert-Butyldimethylsilyl)Oxy)But-3-Yn-2-Yl)Carbamate
Study on Synthesis of (R)-Methyl 2-((Tert-Butoxycarbonyl)Amino)-3-((Tert-Butyldimethylsilyl)Thio)Propanoate
Determination of Platinum in Waste Platinum-Loaded Carbon Catalyst Samples Using Teflon Pressure Vessel-Assisted Sample Digestion and ICP-OES
Determination of Ruthenium in Waste Ruthenium Catalysts Using Inductively Coupled Plasma Optical Emission Spectrometry after Sample Digestion by High Temperature Fusion
Parameter Optimization of Gas Purge-Microsyringe Extraction
Research in Analyzing and Characterizing Nanoparticles in Aqueous Phase Using NMR Solvent Relaxation Method
Synthesis, Crystal Structure of a Twin-Nest-Shaped Cluster Compound, [Mo2O2S6Cu6I2(4,4'-bipy)3]n
Synthesis and Radical Polymerizations of N-Substituted Maleimide Bearing Two Olefinic Groups
Synthesis and Characterization of Triazine-Based Charring Agent and its Application in Flame Retarded Polypropylene
Chapter 9: Food Chemistry and Food Engineering
Comparison of Aromatic Substances in Buckwheat Vinegar that Adding the Moldy Bran, Drug Koji and A.schutzenbachii during Fermentation
Determination of Fluoroquinolones Residual in Freshwater Fish by HPLC
Determination of Gentamicin Residual in Duck Meat Using Fluorescence Analysis Method
Determination of Manganese in Leisure Foods by Incomplete Digestion-Microemulsion Sampling-High Resolution Continuum Source Graphite Furnace Atomic Absorption Spectrometry
Determination of Okadaic Acid and Dinophysistoxins-1 in Mussel by Liquid Chromatography-Tandem Mass Spectrometry
Development and Validation of an UV-Visible Method for the Determination of -Carotene in the Leafy Vegetables in Thailand
Direct and Sequential Determination of Six Metal Elements in Cooking Wine by HR-CS GFAAS
Effect of Hot Air Convection Drying Temperatures on Physical and Chemical Properties of Germinated Sweet Corn
Effects of Cold Preservation on Quality and Sarafloxacin and Difloxacin Residues in Beef
Effects of Different Freezing Rates on the Quality Changes in Cooked Crayfish (Procambarus clarkia) Meat during Frozen Storage (-20 DegreesC)
Effects of Exogenous Ethylene on AC and Rin Tomato Fruit
Experimental Study and Modelling of Moisture Sorption Isotherms of Salted Largehead Hairtail (Trichiurus lepturus) at 25 and 35 DegreesC
Factors that Affected Cooked Chestnut Kernel Browning
Influences of 1-MCP on AC Tomato Fruit Softening
Nutritional Characteristics of Silkworm Pupae Protein En Peptides after Simulated Gastric and Simulated Intestinal Digestion In Vitro
Optimization of Anthocyanins Extraction from Blueberry Pomace by Spray-Drying Process by Response Surface Methodology
Optimization of Extracting Condition of Active Components in Perilla by Ultrasonic
Optimization of Subcritical 1,1,1,2-Tetrafluoroethane( R134a ) Removal of Cholesterol from Spray-Dried Sthenoteuthis oualaniensis Egg Powder Using Response Surface Methodology
Preparation and Properties of Glycerol Plasticized-Corn Starch/Nanoparticles Bionan DegreesComposites
Prepared Polyclonal Antibody of the Ciprofloxacin
Research on Detecting Aluminum in Jellyfish by Flame Atomic Absorption Method
Research on the Extraction and Purification of Dihydromyricetin from Ampelopsis grossedentata
Screening of Mold Producing Aroma in Chinese Koji and Optimization of Culture Conditions
Study on Oxidation Stability of Algae Oil
Study on Processing Technology of Ready-to-Eat Oyster Retort Pouch
Study on Solubility, Water-Holding Capacity and Stability of Polypeptide from Camellia Seed Meal
The Optimization and HS-SPME/GC-MS Analysis in Pear Fruit
Volatile Compositions Analysis of Tilapia (Oreochram niloticus) and Fishy Odour Development in the Muscle
Production of Structured Triacylglycerols from Perilla Seed Oil and Tripalmitin Catalyzed by Lipozyme RM IM
Determining the Impact of Celery Powder and Starter Culture on Quality of Indirectly Cured, Emulsified Cooked Sausages
The Influence of Fermented Celery Power Substituted Conventional Sodium Nitrite to the Growth of Listeria monocytogenes in the Sausage
The Classification of Oak Barrel and the Effect on Wine
Analysis Hierarchy Process in Real Problem Resolution in a Food Company
Chapter 10: Metal Materials and Alloys
Application of Optical Basicity for Estimation of Viscosity of SiO2-CaO-MgO-Al2O3 System
Cracking Failure Analysis of Cr12MoV Steel Guide Roller
Effect of Microporosity on the Tensile Properties of High-Pressure Die-Cast AM50 Magnesium Alloy
Effects of Temperature on Galvanic Corrosion Behaviors of Super 13Cr and P110 Steel Couples in NaCl Solution
Influence of Heat Input on Grain Size in the Structure of 316LN Stainless Steel Welded Joints
Nb-W Alloy Prepared by Mechanical Alloying and Optimal Design of Corresponding Milling Variables
First Principles Calculation of LaNi3 Type Hydrogen Storage Alloy Mg Atoms Occupying
Chapter 11: Composites
A Meshless Local Collocation Method for Natural Frequencies and Mode Shapes of Functionally Graded Plates
A nth-Order Shear Deformation Theory for the Free Vibration Analysis of the Isotropic Plates on Elastic Foundations
Ablation Behaviors of 3D Fine Woven Pierced Carbon/Carbon Composites
Crystallization Behavior and Mechanical Properties of PP/EVA Blends
Effect of Graphite Content on Corrosion Resistance of Zirconia Graphite Materials
Effect of Ground Quartz Sand and Ground Granulated Blast-Furnace Slag on Properties of High-Strength Concrete in the Steam and Autoclaved Curing
Effect of Sintering Temperature on the Celsian/Yttrium Silicate Oxidation Resistant Coatings for C/SiC Composite
Effect of Volcanic Rock Powder on Performance of Foamed Concrete
Finite Element Analysis of Influence of Nanoparticle on Hybrid Composites Reinforced by Fiber and Nanoparticle
In Situ Fabrication of TiC/Fe Composites by SHS Technology
Infrared Analysis on Pyrolysis Products of Flame Retardant Rigid Polyurethane Foam
Phase Stability and Thermal Conductivity of La2O3, Y2O3 Stabilized ZrO2 Ceramic for Thermal Barrier Coating Application
Processing and Mechanical Properties of Natural Rubber/Chitosan/Poly(3-hydroxybutyrate) Blends
Study on the Properties and Mechanism of Flame Retarded Glass Fiber Reinforced Polyamide 6 with Microcapsulated Aluminum Hypophosphite
Tensile Mechanical Properties of Three-Strand PE/SiO2 Composite Fiber Rope
Study on Thermal Degradation Behavior of Composites with Liquid Crystalline Thermoset
Synthesis and Application of a Novel Intumescent Flame Retardant Containing Ferrocenyl
Chapter 12: Polymer Materials
A Method for Prediction of Water Permeability through Polymers
Calculation Method for Predicting Polymer Compatibility: Estimation of Microphase Compositions from Glass Transition Temperatures
Research on Determination for Food-Related Polystyrene Doped with Recycled Plastic by GPC
Study on the Control Strategy of Polydimethylsiloxanols Continuous Production System in One-Step Synthesis
Synthesis of Polymeric Schiff Base (PSB) Nanostructural Materials via Interfacial Polymerization
The Application of Polyurethane Material Structure in the Greenhouse
The Research Status and Applications of Atom Transfer Radical Polymerization
Environmental Factors on Aging of Nitrile Butadiene Rubber (NBR) - A Review
Study on Melamine Formaldehyde Resin Foam Modification Technique
Preparation of Core-Shell Particles Consisted of Polysiloxane and Styrene-Butyl Methacrylate by High Internal Phase Emulsion
Chapter 13: Micro/Nano Materials and Technologies
Bioactive Calcium Silicate Coating of Titania Nanotubes for Controlled Drug Release
Conductive Nanocomposite Aligned Fibers of PVA-AgNPs-PEDOT/PSS
Effect of Solution Properties on Electrospun Chlorinated Polyvinyl Chloride Nanofibers
Electrically Conductive Ultrafine Fibers of PVA-PEDOT/PSS and PVA-AgNPs by Means of Electrospinning
Electrospinning Process of Ethylene-co-Vinyl Alcohol Nanofiber with DMAC/IPA Solution System
Hydrothermal Synthesis and Characterisation of Mn2O3 Nanowires
Influence of Synthesis Temperature on the ZnNb2O6 Powders Prepared via Co-Precipitation Method
Preparation and Characterization of Silicate Wood Adhesive Modified with Ammonium Stearate
Preparation and Luminescence Properties of ZnS: Cu/Fe Nanocrystalline
Preparation of Cu/Co/Fe Mixed Oxides and their Catalytic Behavior on HC-SCR DeNOx
Research on the Preparation and Antibacterial Property of Nanometer-Magnesium Oxide Powder
Self-Assembled Core-Shell Fe3O4@SiO2 Nanoparticles with High Magnetic Sensitivity from Electrospun Fibers
Study on Heavy Metal Ion Adsorption of PAN-Amidoxime Nanofiber Nonwoven Material
Synthesis and Characterization of Novel Degradable and Temperature/Ionic-Strength Responsive Polyurethane Microsphere
Nano-Chromium Trioxide Preparation from Chromium-Containing Waste Liquid Accompanying 16-Dehydropregnenolone Acetate
Preparation and Characterization of Carbon Nanofibers from the High Temperature Controllable Flame
Fabrication of NF-PLLA Scaffolds by Gel Extraction Phase Separation
Synthesis of Oriented ZnO Nanofibers Using Electrospun Method on Si (100) Substrate
Chapter 14: Optical/Electronic/Magnetic Materials
Preparation and Luminescence Properties of Eu3+ Doped Niobium Silicate Glass Ceramics
Study of Dithienylcyclopentene with Substituents at 4-Position of Thiophene
Synthesis and Optical Properties of Asymmetric Naphthylmethylene 1,3,4-Oxadiazole Derivatives
The Resistance-Strain Characteristics of the Knitted Fabric Based on Conductive Composite Yarn
The Study of GaAsP/GaP Photodiode for Yellow Light Detection
Effects of Grain Sizes and Impurities on Thermal Conductivity in Aluminum Nitride
Estimation of Cerenkov Radiation Generated in Various Dielectrics Using MCNPX Simulation
Fast Optical Switching Using Cyanine Dye-Doped Nematic Liquid Crystal
Improving Gravure Plate-Making Method to Printing Transparent Conductive Film
The Research on Gravure Printing RFID Antenna
Light Induced Properties of Chalcones Correlated with Molecular Structure and Photophysical Properties for Permanent Optical Storage Device
Optimization of Thermal Conductivity in Cu Doped AlN Phosphor
Orange and Blue Electrophosphorescence of Iridium Complexes
Synthesis, Characterization and Photophysical Properties of a New CuI Complexe Contain Bis[2-(diphenylphosphino)phenyl]ether and 2-(anthracen-9-yl)-1-phenyl-1H-imidazo[4,5-f][1,10]phenanthroline
Synthesis and Properties of Novel Light-Emitting Materials Containing Triphenylamine, Olefinic Linkers and Bipyridine Units
Synthesis and Fluorescence Properties of Water-Soluble L-Cysteine-Modified ZnSe:Ag Quantum Dots
Low-Voltage InGaZnO Thin-Film Transistors Gated by SiO2 Proton Conducting Films
Chapter 15: New Functional Materials and Improved Properties Materials
Analysis of Lepidolite Resources in Jiangxi Province in China
Effect of Polypropylene Fiber on Performance of Phosphorus Slag Mortar
Energy Savings Potential of Heat Reflective Coatings for Residential and Commercial Buildings in Beijing
Microstructure and In Vitro Biodegradable Properties of Fe-Zn Alloys Prepared by Electroforming
Preparation and Thermal-Resistant Performance of Silicon Rubber
Strain-Induced Structural Evolution and High Robustness in Single Crystalline Fivefold Twinned Cu@C Coaxial Nanowires
Study of the Effects of Treatment Conditions on the Hydrophility of Modified Polyphenylene Sulfide Nonwoven Induced by Low Temperature Plasma
Photocatalytic Finishing of Cotton Fabrics Based on Nano-Titanium Dioxide and Polyurethane Binder
Preparation and Properties of Rare Earth-Doped TiO2 Thin Films by Sol-Gel Process
Chapter 16: Surface Engineering and Coating
Effect of Current Density on Microstructure and Corrosion Resistance of Ni-W Alloy Coatings
Investigation on the Electrochemical Performance of Plasma Sprayed Ni/Cr-Fe Alloy Coatings in 3.5 %(wt) NaCl Solution
Preparation of Epoxy-Organobentonite Nanocomposites Added ZnO-ZrO2 /Al2O3-ZrO2 Nanoparticles and Investigation on their Corrosion Resistance Property in Coating on Q235 Steel
Study on the Corrosion-Resistant Performance of ZSM-5 Zeolite Film on the Surface of Al2024
The Influence of Prepared Methods on Electrochemical Corrosion Behavior of Fe3Al Intermetallic
Chapter 17: Materials Processing Technologies and Joint
Casting Process and Simulation of 50-60017-00 Pulley
Characterization of PVAc Adhesive Penetration and its Effect on Wood Properties
Effect of Annealing Treatment on the Isothermal and Cyclic Oxidation Behavior of an Electrodeposited Alumina-Forming Ni-Al Microcomposite
Study on Dissolution Different of Metal Palladium Powder and Place
The Leaching Behaviours of Chalcopyrite with Distinct Genetic Types
The Overview on the Development of Breakout Prevention System for Continuous Casting
Weld Repairs of the Electroslag Casting Red Copper Crucible
Thermodynamic Calculation of Hydrogen Chloride Generation in Blast Furnace Smelting Process
Study of Influence of Sensitization Process on Quality of Mixed Emulsion Explosive
The Flotation Process of Lepidolite in Jiangxi Province in China
The Mould Flux Heat Conduction Performance Designing of High Carbon Steel for Thin Slab Continuous Casting
Study on Experiment and Simulation for Laser Surface Micro Texturing on Cylinder Piston Ring Friction Pair
Chapter 18: Manufacturing, Machinery and Equipment Design, Applications
Application of High-Pressure Water Jet in Mine
Computer-Aided Design of X-Ray Microtomographic Scanners
Fracture Analysis on the Input Shaft of Coal Pulverize of Supercritical Unit
Method and Simulation for Kinematics of 6-SPS Parallel Mechanism
Modeling and Simulation of Bow-Shaped Piezoelectric Energy Harvester
The Research and Identify on Hydro Generator Rotor Windings Short-Circuit Fault
Optimal Design of Horizontal Well Traction Robot Traction Force Regulating Mechanism
Safety Evaluation in Emulsion Explosive Continuous Manufacturing Based on Unascertained Measurement Model
Research on the Regeneration of Modified Activated Carbon Containing 2,4,6-TCP by Microwave Irradiation
Research on Waste Heat Recovery and Utilization of Hydrogen Production Industry Based on Heat Pipe Heat Exchanger Technology
Chapter 19: Computer Applications and Mathematical Modeling
A Dynamic Neighborhood Selection Approach for Locally Linear Embedding
Randomized 2-Species Predator-Prey System with Functional Response
Effect Evaluation of Bench Blasting Based on Unascertained Measurement Model
Chapter 20: Engineering Education
Comparing the Content of the Term Electron in High School Courses of Physics and Chemistry
Comprehensive Reform the Course System for Chemical Engineering Principles
Connectedness of Physics and Chemistry Courses in the Group of Terms
The Construction and Practice on Practical Teaching System of Chemical Engineering Specialty in Higher Education
「Nielsen BookData」 より