Proceedings of 2014 International Conference on Material Science and Engineering : selected, peer reviewed papers from the 2014 International Conference on Material Science and Engineering, August 8-9, 2014, Xi'an, Shanxi, China
著者
書誌事項
Proceedings of 2014 International Conference on Material Science and Engineering : selected, peer reviewed papers from the 2014 International Conference on Material Science and Engineering, August 8-9, 2014, Xi'an, Shanxi, China
（Advanced materials research, v. 1035）
Trans Tech Publications, c2014
- : pbk
- タイトル別名
-
ICMSE2014
ICMSE 2014
大学図書館所蔵 件 / 全1件
-
該当する所蔵館はありません
- すべての絞り込み条件を解除する
注記
Includes bibliographical references and indexes
"... 2014 International Conference on Material Science and Engineering (ICMSE2014) Organizing Committee, we would like to welcome you to Xi'an, China ..."--Pref.
内容説明・目次
内容説明
Volume is indexed by Thomson Reuters CPCI-S (WoS).
Collection of selected, peer reviewed papers from the 2014 International Conference on Material Science and Engineering, 8-9 August, 2014, Xi'an, Shanxi, China.
The 97 papers are grouped as follows:
Chapter 1: Energy, Environment Materials and Carbon-based materials,
Chapter 2: Structural Materials and Functional Materials,
Chapter 3: Nano-scale Materials Science,
Chapter 4: Electrical Material Science and Technologies,
Chapter 5: Optical, Magnetic and Spintronic Materials and Technologies.
目次
Preface and Organizing Committee
Chapter 1: Energy, Environment Materials and Carbon-Based Materials
Investigation of the Field Emission Stability of Sphere-Like Diamond Microcrystalline-Aggregates Films
Adsorption of Lead on the LDO Based on Reconstruction of LDH
Study on Infiltration Characteristics and Stability of Excavated Loess Slope in an Industry Site
Experimental Investigation on Mechanical Properties of Sandstone in Three Gorges Reservoir Area under Unloading Condition
Hybrid Energy Storage System Used in the New Energy
Continuous Cooling Transformation Behavior and the Phase Transformation Model in Low Carbon High Strength Sheet Steel
Experimental Investigation on LGJ-400/50 ACSR Surface Erosion Characteristics in Wind Sand Environment
Study on Bamboo Particleboard Bambooceramics - PF Resin Content Influence on Properties of Bambooceramics
Study on the Impact of Degummed on Pineapple Leaf Fiber's Structures and Formaldehyde Adsorptions
Synthesis and Copper Sorption of Chestnut-Shell-Pigment/SiO2 Composite
Preparation and Performance Study of Li1.02(Fe0.8Mn0.2)PO4/C by Ti Doping
Research on the Shaft-Frequency Electric Field Character of Ship's Physical Scale Model
Flame-Retardant Properties of Ethylene-Vinyl Acetate/Layered Double Hydroxides Composites
Chapter 2: Structural Materials and Functional Materials
Lime Plasters Containing Waste Ceramic Powder as Partial Replacement of Siliceous Aggregates
Effect of Freeze/Thaw Cycles on the Physical Properties of Selected Building Stones
Palladium Supported on Mesoporous Silica via a Two-Step Method as an Efficient Catalyst for Suzuki-Miyaura Coupling Reactions
Design and Development of Flame Retardance Chef Coats Fabric of Polysulfonamide
Structure and Properties of Double-Filament Tri-Component Combined Yarn
Development of Flame Retardant and Antistatic Fabric
Synthetic Studies on (12S)-12-Hydroxymonocerin
The Effect of Fiber on EPDM Inhibitor Material
Impact of Thickness on Rubber Aging Life
Numerical Analysis for Multi-Point Forming of Aluminum Alloy Profile
In-Suit Synthesis (ZrB2-SiC)/Si High Temperature Oxidation Resistance Coating by Argon Arc Cladding
Mechanical Response of T300/BMP350 Composites under Tensile Loading at Room and Elevated Temperatures
Research of Mechanical Behavior for Rounded and Rectangular Clinched Joint
Synthesis of Ethylene-Propylene Copolymer and their Structures
Fabrication and Phase Transition of Bi2O3-Doped Sr3Ti2O7 Ceramics
The Mix Design Method and Performance for C60 Concrete Poles with High Strength, Impermeability and Frost Resistance
Peak Diffusing Measurement Method for Estimating Thermal Diffusivity of Thin Films
A Novel Extraction-Cleanup Method for Determination of Trace PPCPs in Water Samples
Prediction of Hybrid Fiber Reinforced Concrete Strength on Base of RBF & BP
The Occurrence Modes of Tantalum-Niobium Tailing Mine in Jiangxi Province
The Technical Reconstruction for the Tantalum-Niobium Tailing Mine in Jiangxi Province
Effectiveness of Novel Preservative Solutions for Longan (Dimocarpus longan Lour) Freshness by Coating
Failure Analysis on the Collapsed Tubing of High Pressure and High Production Gas Well in the Process of Testing and Production
Preparation and Interaction of Modified PHS and CMC Liquid Composites
Investigation on the Effect of Resin Content on Buckling of Laminated Composite Plates
Fabrication of Stainless Steel Foams Using Polymeric Sponge Impregnation Technology
Hot Deformation Behavior of 20CrMnTiH Steel Studied by Johnson-Cook Model and Genetic Algorithm
Synthesis of Sponge-Like Material for the Extraction of Fluoroquinolones in Milk
The Application of the Fly Ash Excitated Grinding Materials
Wearing Performances of Superfine Profiled Acrylic Fiber/Silk Interwoven Fabric
The Performance about Multi-Component Blended-Spun-Yarn Fabric Based on Superfine Profiled Acrylic
Study on the Light-Proofness of Double-Layer Curtain Fabrics
The Research of the Absorption and Angle Characteristics of Honeycomb Hexagon Phase Modulation Membrane
Microstructure Evolution in Magnesium Alloy ZK60 during Cyclic Extrusion and Compression
Effects of Different Content of TiO2 on Crystallization Behavior and Properties of Li2O-ZnO-SiO2 Glass-Ceramics
Transformation between Antase and Rutile Titania-Mica Pearlescent Pigment by MnO2 Induced Process
Effect of Heat Treatment on Microstructure and Properties of Casting Al-5.5Fe-4Cu-2Zn-0.4Mg-0.5Mn Alloy
Adsorption of Alcohols onto Zinc Selenide (ZnSe) Crystal Surface
Development of a New Type of Metal Matrix for Porous Metal Bonded Diamond Grinding Wheels
Ruthenium-Catalyzed Cascade Ring-Opening Polymerization/Hydroboration for the Synthesis of Low Cross-Linking Poly (6-norbornenyldecaborane) and its Thermal Property
Property Comparation of Ti-Based and Cr-Based PVD Nitride Coatings
The Preparation of Calcium Carbonate Modified High Water-Absorbing Resin
Effect of Y on Microstructure and Mechanical Properties of Mg-6Al-1Zn-1.8Gd Magnesium Alloy
Resin Material Used in Methyl Acrylate Hydrolysis Reaction
Chapter 3: Nano-Scale Materials Science
Study on Microstructure and Composition of Nanocrystalline Fe-Based Soft Magnetic Material
Preparation of CdO Nanowires from CdO2 Nanoparticles
Coaxial Poly (Phenylene Vinylene)/Carbon Nanotube Nanocomposites
Synthesis of Cu Nanowires by the Self-Assembly Growth Process
Preparation and Characterization of Electrospun CuO Microfibers
Microwave Absorption of Double-Layer Absorber Based on Nanocomposite BaFe12O19/ -Fe and Nanocrystalline Alloy Fe0.2(Co0.2Ni0.8)0.8 Microfibers
Optimization of the Preparation Technology of TiO2 Nanotubes
Effect of Heat Treatment on the Photocatalytic Activity of TiO2 Thin Films Fabricated on Ti-6Al-4V Alloy
Electromagnetic and Microwave Absorption of Nanocrystalline Alloy Fe0.2(Co0.2Ni0.8)0.8 and Nanocomposite SrFe12O19/Ni0.5Zn0.5Fe2O4 Microfibers
Effect of Nano TiO2 Coating on Electrochemical Performance of the Li1.2Mn0.6Ni0.2O2 Cathode Materials
Effect of Annealing Temperature on Structural and Optical Properties of Ceria Nano Particles
Optical Emission Spectroscopy Measurement of Ar\H2\CH4 RF Plasma for Nano-Crystal Diamond Film Deposition
Chapter 4: Electrical Material Science and Technologies
Analysis on Measuring Circuit of Pressure Difference Sensor with Magnetic Fluid
High Performance Supercapacitors Electrode Derived from the Pine Needles
First Principle Study on the Electronic Structure of Borides
Study of Nucleation of CVD Diamond by DC Arcjet Method
A Portable Human Skin Tester Based on Resistance and Capacitance Measurement
Simulation on Electrical Conductivity of CNTs/PE Composites
Factors Influencing Dielectric Properties of A-171@CCTO/PVDF Composite Films
Preparation and Dielectric Properties of Cu/PVDF Composite Films
The Research on the Piezoelectric and Dielectric Properties of Bi0.5(Nak)0.5-BaTiO3 Lead-Free Ceramics
Ultrafast Dynamics of Sub-Wavelength Periodic Surface Structuring during Femtosecond Laser Processing of Dielectrics
Preparation of Heat-Resistant Enameled Wire Coating of Fluorinated Poly (Ether Ether Ketone) and Properties
Analysis of Defect Modes in One-Dimensional Photonic Crystal with a Dielectric-Superconducting Pair Defect
Chapter 5: Optical, Magnetic and Spintronic Materials and Technologies
Experiment on the Attenuation Characteristics of Shock Wave Interacting with Open and Closed Foam
Photo-Aging of Coating Based on Mixture of TDI and N75
Study on Optical and Thermal Properties of Low-E Glass
Synthesis and Characterization of Optically Active Poly(N-Acryloyl-L-alanine) in Ionic Lliquids
The Application of Optical Emission Spectrum in Copper Film Deposition by RF Magnetron Sputtering
Comparison of Water Adsorption Characteristics of Oligo and Polysaccharides of -Glucose Studied by Near Infrared Spectroscopy
Multiway Principal Component Analysis for Smartphone Captured Image of Colloidal Gold Strip
Preparation of Hollow Nickel Ferrite Microspheres and their Magnetic Properties
Improvement of Pulsed Holographic Recording Characteristics of Polyvinyl Alcohol/Acrylamide Green-Sensitive Photopolymer
Synthesis and Optical/Electrochemical Properties of Conjugated Polymers with Diphenyl and Thiophene in Main Chain
Structure and Properties of the GeAsS Glasses from Ab initio Calculations
The Effect of Laser Focus Position on Laser Induced Plasma Characteristics
Study on Design and Mechanism of a New Invisible Cloak for Visible Light
Electromagnetic Wave Absorption Cement Based on Composited Absorbing Agent
Facile Hydrothermal Synthesis of a Graphene-Bismuth Oxide Composite and its Photoresponse Performance
Fabrication and Optical Properties of NiO-SiO2 Composite Photonic Crystals
「Nielsen BookData」 より
