Proceedings of 2014 International Conference on Material Science and Engineering : selected, peer reviewed papers from the 2014 International Conference on Material Science and Engineering, August 8-9, 2014, Xi'an, Shanxi, China

著者

• International Conference on Material Science and Engineering
• Chen, Ping

書誌事項

Proceedings of 2014 International Conference on Material Science and Engineering : selected, peer reviewed papers from the 2014 International Conference on Material Science and Engineering, August 8-9, 2014, Xi'an, Shanxi, China

edited by Ping Chen

（Advanced materials research, v. 1035）

Trans Tech Publications, c2014

• : pbk

タイトル別名

ICMSE2014

ICMSE 2014

注記

Includes bibliographical references and indexes

"... 2014 International Conference on Material Science and Engineering (ICMSE2014) Organizing Committee, we would like to welcome you to Xi'an, China ..."--Pref.

内容説明・目次

内容説明

Volume is indexed by Thomson Reuters CPCI-S (WoS). Collection of selected, peer reviewed papers from the 2014 International Conference on Material Science and Engineering, 8-9 August, 2014, Xi'an, Shanxi, China. The 97 papers are grouped as follows: Chapter 1: Energy, Environment Materials and Carbon-based materials, Chapter 2: Structural Materials and Functional Materials, Chapter 3: Nano-scale Materials Science, Chapter 4: Electrical Material Science and Technologies, Chapter 5: Optical, Magnetic and Spintronic Materials and Technologies.

目次

Preface and Organizing Committee Chapter 1: Energy, Environment Materials and Carbon-Based Materials Investigation of the Field Emission Stability of Sphere-Like Diamond Microcrystalline-Aggregates Films Adsorption of Lead on the LDO Based on Reconstruction of LDH Study on Infiltration Characteristics and Stability of Excavated Loess Slope in an Industry Site Experimental Investigation on Mechanical Properties of Sandstone in Three Gorges Reservoir Area under Unloading Condition Hybrid Energy Storage System Used in the New Energy Continuous Cooling Transformation Behavior and the Phase Transformation Model in Low Carbon High Strength Sheet Steel Experimental Investigation on LGJ-400/50 ACSR Surface Erosion Characteristics in Wind Sand Environment Study on Bamboo Particleboard Bambooceramics - PF Resin Content Influence on Properties of Bambooceramics Study on the Impact of Degummed on Pineapple Leaf Fiber's Structures and Formaldehyde Adsorptions Synthesis and Copper Sorption of Chestnut-Shell-Pigment/SiO2 Composite Preparation and Performance Study of Li1.02(Fe0.8Mn0.2)PO4/C by Ti Doping Research on the Shaft-Frequency Electric Field Character of Ship's Physical Scale Model Flame-Retardant Properties of Ethylene-Vinyl Acetate/Layered Double Hydroxides Composites Chapter 2: Structural Materials and Functional Materials Lime Plasters Containing Waste Ceramic Powder as Partial Replacement of Siliceous Aggregates Effect of Freeze/Thaw Cycles on the Physical Properties of Selected Building Stones Palladium Supported on Mesoporous Silica via a Two-Step Method as an Efficient Catalyst for Suzuki-Miyaura Coupling Reactions Design and Development of Flame Retardance Chef Coats Fabric of Polysulfonamide Structure and Properties of Double-Filament Tri-Component Combined Yarn Development of Flame Retardant and Antistatic Fabric Synthetic Studies on (12S)-12-Hydroxymonocerin The Effect of Fiber on EPDM Inhibitor Material Impact of Thickness on Rubber Aging Life Numerical Analysis for Multi-Point Forming of Aluminum Alloy Profile In-Suit Synthesis (ZrB2-SiC)/Si High Temperature Oxidation Resistance Coating by Argon Arc Cladding Mechanical Response of T300/BMP350 Composites under Tensile Loading at Room and Elevated Temperatures Research of Mechanical Behavior for Rounded and Rectangular Clinched Joint Synthesis of Ethylene-Propylene Copolymer and their Structures Fabrication and Phase Transition of Bi2O3-Doped Sr3Ti2O7 Ceramics The Mix Design Method and Performance for C60 Concrete Poles with High Strength, Impermeability and Frost Resistance Peak Diffusing Measurement Method for Estimating Thermal Diffusivity of Thin Films A Novel Extraction-Cleanup Method for Determination of Trace PPCPs in Water Samples Prediction of Hybrid Fiber Reinforced Concrete Strength on Base of RBF & BP The Occurrence Modes of Tantalum-Niobium Tailing Mine in Jiangxi Province The Technical Reconstruction for the Tantalum-Niobium Tailing Mine in Jiangxi Province Effectiveness of Novel Preservative Solutions for Longan (Dimocarpus longan Lour) Freshness by Coating Failure Analysis on the Collapsed Tubing of High Pressure and High Production Gas Well in the Process of Testing and Production Preparation and Interaction of Modified PHS and CMC Liquid Composites Investigation on the Effect of Resin Content on Buckling of Laminated Composite Plates Fabrication of Stainless Steel Foams Using Polymeric Sponge Impregnation Technology Hot Deformation Behavior of 20CrMnTiH Steel Studied by Johnson-Cook Model and Genetic Algorithm Synthesis of Sponge-Like Material for the Extraction of Fluoroquinolones in Milk The Application of the Fly Ash Excitated Grinding Materials Wearing Performances of Superfine Profiled Acrylic Fiber/Silk Interwoven Fabric The Performance about Multi-Component Blended-Spun-Yarn Fabric Based on Superfine Profiled Acrylic Study on the Light-Proofness of Double-Layer Curtain Fabrics The Research of the Absorption and Angle Characteristics of Honeycomb Hexagon Phase Modulation Membrane Microstructure Evolution in Magnesium Alloy ZK60 during Cyclic Extrusion and Compression Effects of Different Content of TiO2 on Crystallization Behavior and Properties of Li2O-ZnO-SiO2 Glass-Ceramics Transformation between Antase and Rutile Titania-Mica Pearlescent Pigment by MnO2 Induced Process Effect of Heat Treatment on Microstructure and Properties of Casting Al-5.5Fe-4Cu-2Zn-0.4Mg-0.5Mn Alloy Adsorption of Alcohols onto Zinc Selenide (ZnSe) Crystal Surface Development of a New Type of Metal Matrix for Porous Metal Bonded Diamond Grinding Wheels Ruthenium-Catalyzed Cascade Ring-Opening Polymerization/Hydroboration for the Synthesis of Low Cross-Linking Poly (6-norbornenyldecaborane) and its Thermal Property Property Comparation of Ti-Based and Cr-Based PVD Nitride Coatings The Preparation of Calcium Carbonate Modified High Water-Absorbing Resin Effect of Y on Microstructure and Mechanical Properties of Mg-6Al-1Zn-1.8Gd Magnesium Alloy Resin Material Used in Methyl Acrylate Hydrolysis Reaction Chapter 3: Nano-Scale Materials Science Study on Microstructure and Composition of Nanocrystalline Fe-Based Soft Magnetic Material Preparation of CdO Nanowires from CdO2 Nanoparticles Coaxial Poly (Phenylene Vinylene)/Carbon Nanotube Nanocomposites Synthesis of Cu Nanowires by the Self-Assembly Growth Process Preparation and Characterization of Electrospun CuO Microfibers Microwave Absorption of Double-Layer Absorber Based on Nanocomposite BaFe12O19/ -Fe and Nanocrystalline Alloy Fe0.2(Co0.2Ni0.8)0.8 Microfibers Optimization of the Preparation Technology of TiO2 Nanotubes Effect of Heat Treatment on the Photocatalytic Activity of TiO2 Thin Films Fabricated on Ti-6Al-4V Alloy Electromagnetic and Microwave Absorption of Nanocrystalline Alloy Fe0.2(Co0.2Ni0.8)0.8 and Nanocomposite SrFe12O19/Ni0.5Zn0.5Fe2O4 Microfibers Effect of Nano TiO2 Coating on Electrochemical Performance of the Li1.2Mn0.6Ni0.2O2 Cathode Materials Effect of Annealing Temperature on Structural and Optical Properties of Ceria Nano Particles Optical Emission Spectroscopy Measurement of Ar\H2\CH4 RF Plasma for Nano-Crystal Diamond Film Deposition Chapter 4: Electrical Material Science and Technologies Analysis on Measuring Circuit of Pressure Difference Sensor with Magnetic Fluid High Performance Supercapacitors Electrode Derived from the Pine Needles First Principle Study on the Electronic Structure of Borides Study of Nucleation of CVD Diamond by DC Arcjet Method A Portable Human Skin Tester Based on Resistance and Capacitance Measurement Simulation on Electrical Conductivity of CNTs/PE Composites Factors Influencing Dielectric Properties of A-171@CCTO/PVDF Composite Films Preparation and Dielectric Properties of Cu/PVDF Composite Films The Research on the Piezoelectric and Dielectric Properties of Bi0.5(Nak)0.5-BaTiO3 Lead-Free Ceramics Ultrafast Dynamics of Sub-Wavelength Periodic Surface Structuring during Femtosecond Laser Processing of Dielectrics Preparation of Heat-Resistant Enameled Wire Coating of Fluorinated Poly (Ether Ether Ketone) and Properties Analysis of Defect Modes in One-Dimensional Photonic Crystal with a Dielectric-Superconducting Pair Defect Chapter 5: Optical, Magnetic and Spintronic Materials and Technologies Experiment on the Attenuation Characteristics of Shock Wave Interacting with Open and Closed Foam Photo-Aging of Coating Based on Mixture of TDI and N75 Study on Optical and Thermal Properties of Low-E Glass Synthesis and Characterization of Optically Active Poly(N-Acryloyl-L-alanine) in Ionic Lliquids The Application of Optical Emission Spectrum in Copper Film Deposition by RF Magnetron Sputtering Comparison of Water Adsorption Characteristics of Oligo and Polysaccharides of -Glucose Studied by Near Infrared Spectroscopy Multiway Principal Component Analysis for Smartphone Captured Image of Colloidal Gold Strip Preparation of Hollow Nickel Ferrite Microspheres and their Magnetic Properties Improvement of Pulsed Holographic Recording Characteristics of Polyvinyl Alcohol/Acrylamide Green-Sensitive Photopolymer Synthesis and Optical/Electrochemical Properties of Conjugated Polymers with Diphenyl and Thiophene in Main Chain Structure and Properties of the GeAsS Glasses from Ab initio Calculations The Effect of Laser Focus Position on Laser Induced Plasma Characteristics Study on Design and Mechanism of a New Invisible Cloak for Visible Light Electromagnetic Wave Absorption Cement Based on Composited Absorbing Agent Facile Hydrothermal Synthesis of a Graphene-Bismuth Oxide Composite and its Photoresponse Performance Fabrication and Optical Properties of NiO-SiO2 Composite Photonic Crystals

「Nielsen BookData」 より

• NII書誌ID(NCID): BB18505733
• ISBN:
  • 9783038352600
• 出版国コード: sz
• タイトル言語コード: eng
• 本文言語コード: eng
• 出版地: Pfaffikon
• ページ数/冊数: xii, 542 p.
• 大きさ: 24 cm
• 親書誌ID:
  • BA24926058