Modern technologies in industrial engineering II : selected, peer reviewed papers from the International Conference on Modern Technologies in Industrial Engineering (ModTech 2014), July 13-16, Gliwice, Poland
Author(s)
Bibliographic Information
Modern technologies in industrial engineering II : selected, peer reviewed papers from the International Conference on Modern Technologies in Industrial Engineering (ModTech 2014), July 13-16, Gliwice, Poland
（Advanced materials research, v. 1036）
Trans Tech Publications, c2014
- : pbk
- Other Title
-
Modern technologies in industrial engineering II : ModTech 2014
Available at 1 libraries
Note
Includes bibliographical references and indexes
"The second edition of ModTech International Conference was held in Gliwice, Poland, between July 13-16 ..."--Pref.
Description and Table of Contents
Description
Collection of selected, peer reviewed papers from the Modern Technologies in Industrial Engineering, July 13-16, Gliwice, Poland.
The 189 papers are grouped as follows:
Chapter 1: Applied Materials and Technologies,
Chapter 2: Tools and Technologies for Materials Processing,
Chapter 3: Parts and Components of Industrial Equipments,
Chapter 4: Industrial Robotics,
Chapter 5: Flexible and Integrated Manufacturing Systems,
Chapter 6: Maritime Engineering and Technologies,
Chapter 7: Modern Technologies in Product Design,
Chapter 8: Engineering Management of Manufacturing Systems.
Table of Contents
Preface, Committees, Invited Speakers, Topics and Presidents
Chapter 1: Applied Materials and Technologies
Drying Kinetic Simulation of Clay Tiles Made from the Raw Material Having Less Clay Fraction
The Influence of Sliding Velocity on the Wear Intensity in Case of Polymeric Composite Materials Reinforced with Short Carbon Fibers
Impact Resistance of "Liquid Wood"
High Manganese Austenitic X6MnSiAlNbTi26-3-3 Steel - Characteristic, Structures and Properties
Microwave Differential Thermal Analysis Technique of the Fe2O3+BaCO3 Homogeneous Mixture
Determination of some Mechanical Characteristics of Wood Elements Improved with Composites Materials
Studies Regarding the Influence of Loading Force on the Wear Intensity in Case of Polymeric Composite Materials Reinforced with Short Carbon Fibers
Structure and Properties of the Aluminium Alloy AlSi12CuNiMg after Laser Surface Treatment
Research on Obtaining Open-Cell Foam by Molten Metal Infiltration
Modelling of Hardness Prediction of Alloyed Copper Using Artificial Neural Networks Applications
Comparative Overview of Different Physical-Chemical Treatments Applied for Real Textile Effluents
Tribological Properties of Polymer Composites Reinforced with Silver Particles
Reinforcement Corrosion to Aggressive Environment
Transport Phenomena in "Liquid Wood" Treated with a Complex Fluid Using the Scale Relativity
Computational Thermodynamic Analysis of Nanostructured Materials for Protective Coatings
Experimental Investigation to Evaluate the Optimum Performance of Helical Coiled Tube with Insert and Nano-Fluid
Microstructure and Mechanical Tests of AlNiMnZnCu High Entropy Alloys
Microstructure and Mechanical Properties of FeNiCrCuAl High Entropy Alloys
Microstructure Researches of Metallic Composite Foams Based on AlMg Alloys
Changes in the Structure and Properties of the Steel S700MC by Heat Treatment
Growth of AlN by Reactive Gas Injection of Nitrogen in an AlMg Matrix
Influence of Hot-Working Conditions on a Structure of X11MnSiAl17-1-3 Steel
Comparison of Long-Term Ageing Duration of Binary Ag-Cu Alloys
Influence of the Degree of Cold Drawing on the Microstructure and Properties of Pipes Used for Dampers
Distribution Coefficient of Arsenic Durng Liquid-Phase Epitaxy Layer Growth of Phosphide-Arsenide of Gallium
Researches on Fracture Surfaces Electrochemically Charged with Hydrogen
Oxidation Resistance of Coating Obtained by Innovative Methods for Energy Boilers
Secondary Radiation in Color Optical Filter Glasses by the Action of Plasma
Microstructural Characterization of Silicide Coatings on Mo and TZM Alloy
Laser Annealing of 8YSZ Powders
Decreasing the Adhesion Effect of Surfaces Using Graphite Pellicle Deposition through Electric Discharges in Pulse
Formation of Taylor Cone Shaped Asperities on Cylindrical Surfaces by Applying Electric Discharges in Pulse
Contact Wear Studies over Idlers Sprayed with Ni Al Si Powder Using Atmospheric Plasma Spraying Method
Modeling of the Minehunters Hull Strenght
Microbiological Testing of Biodegradable MgCa Alloys for Use in Orthopedic Implants
Study of Various Thin Films Obtained by Several Deposition Methods
The Study of Microstructure of the MgCa Alloys in their Use in Biodegradable Orthopedic Implants
Cladding of Inconel 625+WC Composite Coatings Using a Direct Diode Laser
Friction Studies over Idlers Sprayed with Al2O3 Powder Using Athmosferic Plasma Spraying Method
Chapter 2: Tools and Technologies for Materials Processing
Characteristics of Hybrid Coating Deposited by PVD and PACVD Process
Study Concerning the Cutting Tool Wear at Drilling of the Stainless Steel X20Cr13
Study about the Calculus Relation of the Cutting Moment at Widening of the Stainless Steel X20Cr13
Modification of Heat Flow Parameters during the Ceramic Assisted Microwave Heating of HDPE
Comparative Study Concerning the Generation of some Circular Grooves by Radial Cold Rolling with Roller Tools and Cutting
Researches Concerning the Improving of the Cutting Inserts Durability Using Titanium Deposition
Modeling and Experimental Research Regarding the Temperature Distribution along Curved Cutting Edges
Numerical Analysis of the Material Thickness Variation during Forming Process of Conical Mini-Parts
Numerical Analysis of the Residual Stresses Caused by Forming Process in Case of Conical Mini-Parts
Integrated System for Monitoring the Tool State Using Temperature Measuring by Natural Thermocouple Method
Fuzzy Failure Mode and Effect Analysis Application to Improve Laser Cutting Process
A Study Concerning the Workpiece Profile after Grinding Process of Precessional Gear Wheels
Theoretical and Experimental Aspects Concerning Elastic Behavior in the Grinding Technological System
Comparative Study Concerning the Generation of some Circular Grooves by Cold Rolling with Wedge Tools and Cutting
Determination of the Optimal Blank Diameter in the Case of Mini Deep Drawing by Applying the Fuzzy Logic and Taguchi Methods
Influence of the Tool Clearances on the Dimensional Accuracy of Mini Drawn Parts
Generation of Square Cavity Using Planetary EDM
Experimental and Numerical Study of Heat Conditions during Diode Laser Gas Nitriding of Titanium Alloy
An Optimization Study of Fluid Jet Flow in a Convergent Divergent Nozzle Geometry Used for the Cooling Systems of Machine Tools
Welding of Inconel 625 Using a Direct Diode Laser
An Investigation of Forces during Roller Forming Process
The Influence of the Blank Holder Force on Material Thinning during Forming of a Rectangular Part Made from Tailor Welded Blanks
Thermal Embossing Method for Glass Recycling
The Influence of the Punch Speed on the Welding Line Movement during Deep Drawing in Case of Tailor Welding Blanks
Research of Changeability of Cutting Process Parameters at Turning of the Shaped Surfaces
Improvement of Dynamic Properties of Thin Disc Cutting Tools on the Basis of Controlled Impact
The Method of Substitutive Circles Family: Application in Catia Design Environment for Gear Shaped Tool Profiling
Spiroid Gear with Composite Profile of the Worm - Hob Mill Tool
Three Edged Drill vs. Double - Edged Drill in Aluminium Parts Drilling
The Computer-Assisted Design Method of Staggered-Tooth Milling Cutter for Manufacturing of the Complex Helical Surfaces
Researches in Cutting Parameters Influence on the Surface Quality in Worms Manufacturing with Whirling Thread Cutting
Considerations on Quality Parameters at Deformation and Splitting Process of Interior and Exterior Surfaces
Choice of Lubricating and Cooling Action of Cutting Fluids by the Thermomechanical Model
Mechanism of Laser Surface Modification of the Ti-6Al-4V Alloy in Nitrogen Atmosphere Using a High Power Diode Laser
Finite Element in Designing of the Gate Location, Shape and Moulding Injection Path
Loss of Aluminium during the Process of Ti-Al Alloy Melting in VIM Furnace
Influence of the HPDL Surface Treatment of the X40CrMoV5-1 Tool Steel on Wear Resistance
HPDL Laser Alloying of Al-Si-Cu Alloy with ZrO2 Powder
Steel Welding with Micro-Jet Injector
Plastic Properties of Welds after Micro-Jet Cooling with Different Cooling Gases
Tribological Properties of Super Field Weld with Micro-Jet Process
Some Aspects about Structural Changes on Steel Laser Heat Treating
Controlling and Monitoring of Welding Parameters for Micro-Alloyed Steel Pipes Produced by High Frequency Electric Welding
Peculiarity of the Tool-Electrode Wear Mechanism during Surface Machining with Electric Discharges in Pulse
Experimental Research about Adjusting the Exposure Time and Power Level of Microwaves for Industrial Applications
High Power Diode Laser Application for Metals Surface Treatment Based on Wear Resistance Investigation
Chapter 3: Parts and Components of Industrial Equipments
Advantages of Spectrally Analyzed Data: Stochastic Models for Automotive Measured Parameters
Simulating the Longitudinal Dynamics of a Tracked Vehicle
On Transient Queue-Size Distribution in a Single-Machine Production System with Breakdowns
Modelling of an Electric Circuit's Type Influence on Dynamic Flexibility of System with Passive Vibration Damping
CMM Design Based on Fundamental Design Principles
Control of Vibration of Mechanical Systems Using Electrical Subsystems
Analyzing the Interdependence between a 4x4 Automobile's Slip and the Self-Generated Torque within its Transmission
Diagnose Method Based on Spectral Analysis of Measured Parameters
The Analysis of Hydrogen Absorption by the Fatigue Crack in Changeable Loaded Structure
Protection of Hydraulic Systems against Dynamic Loads Using Multi-Valve Approach
Design of the Roof Support with Strait-Line Mechanism
Finite Elements Analysis of the Rail-Wheel Rolling Contact
Using Statistically Based Modeling for Vehicle Dynamics
Ballistic Impact: A Comparative Case Study Using Lagrangian Method with Erosion Criterion and SPH
Theoretical Approach on Internal Combustion Engines Using Multivariable Procedures
Modelling the Structural Steel Hardness Using Genetic Programming Method
Modeling of Powertrain System Dynamic Behavior with Torsional Vibration Damper
Breaking Process Modeling Using FEM - Proposition of a Method for Identification of Material Data and for Identification Features Job Contact
The Choice of Diagnostic Symptom on the Basis of Mathematical Model Analysis
The Load Model of Chosen Element of Underframe with Use the Acceleratrion Signals
Analysis of Non-Classical Models which Have been Subjected to Percussive Loads Using Equations of Energy and Power
418V Side Dump Car Introduction: Wall Opening Simulation and Further Research
Decreasing the Contact Surface between Piston and Cylinder at the Heat Engines by Rotary-Percussion
Modelling of Torsional Vibrating Systems with Composite Piezoelectric Assemblies
Impact of Structural Characteristics of Flexspline on the Stresses Occurring at the Tooth Space Bottom
Evaluation of the Influence of the Diameter and Shape of Lightening Holes on Effort of Webs and Values of Critical Forces of Thin-Walled Girders
Structural Health Monitoring of Rotating Machines in Manufacturing Processes by Vibration Methods
Designing a Cold Plate Used in Rapid Freeze Prototyping Technology
The Implementation of the Material Loss Detection Method in the Author Computer Aided Overhaul Software
The Practical Verification of the Material Loss Detection Method for Cylindrical Shape Parts
Computer Aided Design of Classic External Geneva Mechanism
Studies on Establishing a Methodology for Predicting the Riveted Joints Fatigue Durability in Aircraft Structures
Computer Aided Process of Designing the Mechatronic Silesian Greenpower Electric Car
The Analysis of Energy Consumption of a Ballistic Shields in Simulation of Mobile Cellular Automata
Impact and Energy Absorption of TWB Thin-Walled Structures with Polygonal Cross-Sections
Study of Wheel-Rail Vibration in Railways
Analytic General Solution Employed to Calculate the Geometrical Characteristics in Structural Problems
Effect of Suction Pipe Diameter and Submergence Ratio on Air Lift Pumping Rate
Chapter 4: Industrial Robotics
Computer Aided Analysis of Systems with MFC Actuators
Modelling of Cutting Force and Robot Load during Machining
Agent-Based Systems Approach for Robotic Workcell Integration
Theoretical and Experimental Research on Sequential RPP Manipulator
Conception of the Integration of the Virtual Robot Model with the Control System
Mixed Reality as a Tool Supporting Programming of the Robot
Visual Interface for Hybrid Programming of the Industrial Robot
Concepts of Flexible Production Line, on the Example of Robotic Cell
Recognition of Geometric Shapes in Images
Some Aspects Concerning Geometric Forms Automatically Find Images and Ordering them Using RobotStudio Simulation
Design and Kinematic Aspects of a Hybrid Locomotion Robot
The Markup Language as a Form of Description of the Robot's Scene
A Mobile Robot with Modified Mecanum Wheels
An Overview on Ankle Rehabilitation Devices
Simulation of Mechanical Characteristics of the Integrated Drive Systems
Multibody System Software Used for Research of Car Suspension System Dynamics
Terms of Replacing Conventional Quality Control Systems by the Poka-Yoke Systems
Validation Process of the Automatic Poka-Yoke Systems in Case of Symmetrical Objects
Design and Simulation of a Mechanism for Human Leg Motion Assistance
Simulator of the Car for Driving Courses for the People with Mobility Impairments
Chapter 5: Flexible and Integrated Manufacturing Systems
Automatic Generation Method of Simulation Model for Production Planning and Simulation Systems Integration
Interaction of the Decision Maker in the Process of Production Scheduling
Practical Example of the Integration of Planning and Simulation Systems Using the RapidSim Software
The Procedure of Reaction to Unexpected Events in Scheduling of Manufacturing Systems with Discrete Production Flow
On Departure Process in a Production Model with Cyclic Working and Repair Periods
The Expert System Supporting Design of the Manufacturing Information Acquisition System (MIAS) for Production Management
Optimization of the Lean Production Process Using the Virtual Manufacturing Cell
A New Procedure of Production Orders Sequencing in Mixed-Model Production Systems
Peculiarities of Parameter Definition of Products Routing in Branching Flow-Spatial Technological Systems on the Basis of Multidimensional Algebra of Groups
On Pareto Optimal Solution for Production and Maintenance Jobs Scheduling Problem in a Job Shop and Flow Shop with an Immune Algorithm
Analytical Interpretation to Optimize Transport Systems
A Production Scheduling Model with Maintenance
Databases Model for Determining of Technological Features Based on the Theory of Technological Similarity
An Attempt to Application of Chain Codes for Design Similarity Evaluation
The Use of ERP Systems to Determine the Impact of the Company on the Environment
Predictive and Reactive Scheduling for a Critical Machine of a Production System
A Methodology of CAPP/CAP Systems Integration Based on a Product Intermediate State Representation
Sensitivity Analysis of Predictive Scheduling Algorithms
On Effect of Model Parameters on Departure Process in a Production System with Failures
Chapter 6: Maritime Engineering and Technologies
Structural Safety Assessment of a 1100 TEU Container Ship, Based on a Enhanced Long Term Fatigue Analysis
The Study of Waves Energy Capture of a Conversion Process with Floating Bodies
Ship Manoeuvrability Prediction Using Neural Networks Analysis
Sea Trails of Large Container Ships
Study of Maritime - Road Intermodality in Constanta Port by Evaluating Trips Generation/Attraction Potentials
Risks and Reliability Assessment in Maritime Port Logistics
RFID Loop Tags for Merchandise Identification Onboard Ships
Carbon Dioxide Transport and Storage
On the Accuracy of a Method of Moments Approach for Displacement Decomposition into Elementary Movements
Chapter 7: Modern Technologies in Product Design
Computer Aided Design and Analysis of Composite Structure
How to Redesign Ergonomic Workstations, Using Neural Networks and the Rula Method in Catia V5
Application of Functional Features to the Description of Technical Means Conception
Application of the Method Basing on Engineering Knowledge and Experience for Adding the Hexapod Design Process
Application of the CBR Method for Adding the Design Process of Module Manipulators
Computer Aided Instrument to be Used as an Automatic Design Component
Integrated Approach to the Designing Process of Complex Technical Systems
Fuzzy Logic Applications in Gears Manufacturing
Optimality of the Machining Process Based on the Mutual Influence of Design and Technological Dimension Relations
Augmented Reality Aided 3D Modelling
Chapter 8: Engineering Management of Manufacturing Systems
Performance and Differential Costs Analysis in a Two Echelons Repair System with Infinite Servers Queues
Contextual Factors and Knowledge Sharing Motivation: A Research Framework
E-Commerce and Intelligent Agents in Virtual Enterprises
The Cost to Quality Ratio in Terms of Voyage Energy Efficiency
Symbiosis Process in Business Ecosystem
Performance Management in Entrepreneurial Contexts
Researches into the Stochastic Modelling of the Brake Shoes Stock Used in Railway Wagon Maintenance
Energy Efficiency Process for Manufacturing Crank Shaft
by "Nielsen BookData"