High technology: research and applications : selected, peer reviewed papers from the International Conference for Young Scientists "High Technology: Research and Applications 2014" (HTRA 2014), March 26-28, 2014, Tomsk, Russia
著者
書誌事項
High technology: research and applications : selected, peer reviewed papers from the International Conference for Young Scientists "High Technology: Research and Applications 2014" (HTRA 2014), March 26-28, 2014, Tomsk, Russia
（Advanced materials research, v. 1040）
Trans Tech Publications, c2014
- : pbk
大学図書館所蔵 件 / 全1件
-
該当する所蔵館はありません
- すべての絞り込み条件を解除する
注記
Includes bibliographical references and indexes
内容説明・目次
内容説明
Volume is indexed by Thomson Reuters CPCI-S (WoS).
Collection of selected, peer reviewed papers from the International Conference for Young Scientists "High Technology: Research and Applications 2014" (HTRA 2014), March 26-28, 2014, Tomsk, Russia.
The 186 papers are grouped as follows:
Chapter 1: Advanced Materials and Nanotechnology,
Chapter 2: Chemical Technologies,
Chapter 3: Simulation of Physical and Chemical Processes,
Chapter 4: Applied and Computational Mechanics,
Chapter 5: Engineering of Machines and Mechanisms,
Chapter 6: Technologies of Electrophysical Methods of Materials Treatment,
Chapter 7: Materials Processing Technologies in Mechanical Engineering,
Chapter 8: Sensors, Measurements and Non-Destructive Control.
目次
Preface and Committees
Chapter 1: Advanced Materials and Nanotechnology
Antistatic Composite Co tings on the Basis of Powder Paints
Application of Polymer Gel-Electrolytes for Cleaning and Restoration of Steel Objects
Design and Investigation of Hard Metal Composites Modified by Nanoparticles
Development of New Ni-Al Porous Alloys for Metal-Supported Solid Oxide Fuel Cells
Effect of Thermomechanical Treatment on Superelasticity in Ni54Fe19Ga27 Single Crystals
Electromagnetic Properties of W - Hexaferrites Composites with Magnetic Texture
Electrophysical Characteristics of Metal-Insulator-Semiconductor Structures Comprising CdHgTe-Based Quantum Wells
Evaluation of Physical and Mechanical Properties of Structural Components of Ti-Nb Alloy
Formation of Coatings on Titanium Substrates Obtained from Mixtures of Tungsten and Cobalt Salts Using Shaped-Charge Explosion
High Temperature Uranium Nitride Decomposition
Influence of Surfactants on the Structure and Wear Resistance of Copper Alloyed Hypereutectoid Steel
Investigation of Product Aluminum - Water Reaction
Investigation of Genotoxicity of Gold Nanoparticles Prepared by the Electric Spark Dispersion Method
Magnetic Structure of Nanosized Ferrimagnetic Particle Depending on External Parameters
Materials of New Generation in Nuclear Power Industry
Mineral Carriers for Nanoscale Additives in Bituminous Concrete
Model of Polycrystalline Inelastic Deformation with Grain Boundary Sliding Description
Molecular Dynamic Simulation of Carbon Nanostructures Formation
Morphological, Physical and Chemical Characteristics of Biocompatible Nano-Sized Carbonate-Substituted Hydroxyapatite
Nonlinearity of Dependence of Integral Friction Index of Tribosystem from Hydrophilic Properties of Surface-Modified Metal Fillers
Numerical Simulation of Severe Plastic Deformation of Titanium Specimens under Dynamic Channel Pressing
On Technological Uses of Local Strain Patterns of the Commercial Zr-Nb Alloys
Orientation Dependence of Cycle Stability of Superelasticity Response in Quenched and Aged Ferromagnetic Co35Ni35Al30 Single Crystal
Polymer Composite Materials Based on Ultra High Molecular Weight Polyethylene Matrix Filled by Alumina Powders
Production and Quality Assessment of Superelastic Ti-Nb-Based Alloys for Medical Application
Radioabsorbing Materials Based on Polyurethane with Carbon Fillers
Research of Electromagnetic Properties of Composite Materials on the Basis of MWNTs in Microwave Range
Role of Micro- and Nanofillers in Abrasive Wear of Composites Based on Ultra-High Molecular Weight Polyethylene
Sintering of NiO/YSZ Anode Layers for Metal-Supported Solid Oxide Fuel Cell
Structure and Properties of Multilayered Composite Materials "Nickel - Nickel Aluminide" Obtained Using SPS Method
Structure and Tribotechnical Properties of Al-Sn Alloys Prepared by the Method of Liquid-Phase Sintering
Study of Tungsten and Molybdenum Nanopowders Interaction with Sulphur in SHS Conditions and Synthesized Product Properties
Technical and Economical Efficiency for Application of Nanomodified High-Strength Lightweight Concretes
The Development of Photocatalytic Systems Entitled Titanium Dioxide Nanoparticles Attached to Polypropylene Fibrous Carrier for Freshwater Disinfection
The Effect of Anisotropy in Polymeric Matrices on Compositional Properties at Various Temperatures
The Fe-Core/Carbon-Shell Ultrafine Nanopowders as Platform for Biomolecules Grafting
The Use of Alumina Nanoparticles as Modifiers of Galvanic Binder of Diamond Tools
Transport of Reactants in Ultrathin Channels during the Etching Reaction
Tribotechnical Properties of HA Nanocomposite Based on UHMWPE under Dry Sliding and Lubrication
Tribotechnical Properties of UHMWPE Based Composite Filled with HA Microparticles under Dry Sliding and Lubrication
Kinetics Flash Cathodoluminescence in Crystals with Nonstationary Defectiveness
Copper Alloys Structure Parameters
Fractographic Regularities in Fatigue Failure of 17Mn1Si Steel
Improving Characteristics of Austenitic Steels by Modification
Influence of Nanopowders on Corrosion Resistance of Welded Joints
Investigation of the Properties of Alumina-Zirconia Ceramics
Research into the Causes of the Cracking of Large Workpieces Low Carbon Steel by Pressure Treatment
Chapter 2: Chemical Technologies
2-NSA, 1,5-NDSA Application and Sodium Naphtionate as Fluorescent Indicators at Oil Field
New Effective and Environmental Friendly Method for the Hydrodediazoniation of Arenediazonium Tosylates Using Fe-Core/Carbon-Shell Nanoparticles
Activation of Synthesis and Sintering of Mullite Aluminosilicate Ceramics Based on Natural Raw Materials
Ceramic Pigments with the Diortosilicate Structure Based on the Dicalcium Silicate
Decomposition and Preconcentration Methods for the Determination of Pt, Pd, Re in Mineral Raw Materials
Determination of Au, Pb, Ni, Co in Silicate Rocs and Ores by Atomic Absorption Spectroscopy with Graphite Furnace
Development of Radioactive Sources on the Basis of Bioinert Ceramic Materials for Medical Applications and their Pre-Clinical Testing
Electrochemical Determination of Heparin in Pharmaceuticals with Using Malachite Green
Electrochemical Response of Gold Nanoparticles at a Graphite Electrode
Features of Processing of Ceramic Materials by an Electromagnetic Field
Grafting of the Organic Functional Groups to the Iron Nanoparticles Surface via Arenediazonium Tosylates
Heat-Insulating Materials Obtaining from Dispersive Screenings of Construction Sand
Investigation of Lactobacilli Properties
Liquid Phase Petroleum Resin Oxidation by Systems Based on Hydrogen Peroxide
Liquid-Phase Oxidative Degradation of the Damaged or Expired Medicinal Products
One-Pot Synthesis of Gelatinized Maize Starch-Graft-Polyacrylic Acid Films
p-Nitrotoluene Bromination Using Barium Fluorobromate Ba(BrF4)2
Processes of Ultra- and Nanofiltration for Cleaning Solutions from Iron Colloid Substances
Products of Reaction between Barium Chloride and Sodium Hyrdosilicates: Examination of Composition
Radiation-Protective Composite Binder Extended with Barium Hydrosilicates
Research of Water-Alcohol Solution Permittivity at Phase Transition by Radiophysics Method
Some Peculiarities of Spin Manifestation in Isotope Effects
Study of Mechanical Activation Processes of Mica Bearing Rocks
Study of the Effect of Butylenes Content in Butane Fraction on Butane Dehydrogenation Process
Study of the Graphite Electrode Surface with In and Pt Deposits
Study of the Hydrodesulphurization Process of Hydrogenate of Shubarkol Coal
Suppressing the Hydrogen Sulfide and Sulfur Dioxide Emission from Sulfur-Bituminous Concrete
Synthesis and Characteristics of Melamine Formaldehyde Composites
Synthesis of Highly Dispersed Pt Catalysts on MWCNTs via Hydrolytic Deposition without Preliminary Modification of the Support
Synthesis of Silica Gel with Surface Layer of Transition Metals 8-Oxyquinolinates for Gas Chromatography
Synthesis of Substituted Semicarbazone, Thiosemicarbazone and Aminoguanidine
Synthesis of Trans- or Cis- Ethyl 5-Chloropent-4-Enoates
Synthesis of -SiAlON Porous Ceramics by Filtrational Combustion of Reactive Foams in Nitrogen Flow
The Synthesis of Iodbenzimidazoles and Iodbenzoxazoles via Iodination of Arenediazonium Tosylates
Performance Evaluation of Plasma Sulphate Disposal Lignin
Calculation and Optimization of Plasma Utilization Process of Inflammable Wastes after Spent Nuclear Fuel Recycling
Sorption of Rhodamine into Polymer Block Matrix
Combustion-Synthesized Porous Ni-Al Materials for Radiative Porous Burners
Sol-Gel Synthesis of Chelate Containing Materials for Gas Chromatography
Chapter 3: Simulation of Physical and Chemical Processes
Crystal Plasticity Modeling of Duplex Steels at High Temperatures
Development of Coupled Model of SHS-Extrusion
Dynamics of Diffusion and Mechanical Waves Interaction under Conditions of Metal Surface Treatment with Particle Fluxes
External Extreme Impacts on NPP Constructions - Methodology of Computational Simulation
Math Modeling of Vacuum Conductive Timber Drying
Mathematical Model of Iron Reduction with Aluminothermic Method
Mathematical Modeling of Dispersed Condensed Substance Ignition by Local Energy Source
Mathematical Modeling of Pulsed Electro Contact Sintering of Carbide Powder Composition
Mathematical Modeling of the Solid Phase Sintering of Ti and Cu Powders in the Controlled Heating Conditions
Model of the Oxygen Cutting Taking into Account the Melting of Metal
Modeling of Gas Multistage Separation to Increase Stock Tank Oil
Modeling of Physical and Chemical Processes of Anodic Bonding Technology
Modeling of the Heat and Kinetic Phenomena Accompanying the Different Material Joining Using Solid-Phase Synthesis
Modeling of the Sulfur-Bituminous Concrete Mix Compaction
Numerical Comparison of Gas Flows through Plane Porous Heat-Evolutional Object with Axisymmetric one when Object's Outlet is Partially Closed
Numerical Research of Heat and Mass Transfer Processes in Water Vapors and Gaseous Thermal Decomposition Products Mixture above the Combustible Wood on the Conditions of Chemical Reaction Termination in it
Numerical Research of Physical and Chemical Processes at Polymeric Material Ignition by Several "Hot" Particles
Numerical Research on the Influence of Autonomous Power Plant Condenser Design on Two-Phase Stream Parameters
Numerical Study of the Heat Radiation from the Porous Cylindrical Burner with Radiative Heat Exchange
Parallel Algorithm for Modeling of Dynamic Processes in Porous Media
Phase Distribution and Stresses in the Coating Deposited from Plasma
Quasi-Static Loading of Single Crystal Plasticity Analysis
Residual Meso Stresses in Multilevel Crystal Plasticity Models
Simulation and Modeling Software in Chemical Technology: Polymerization of Vinyl Chloride
Some Aspects of Computer Approaches to Simulation of Bimodal Sphere Packing in Material Engineering
Structure Formation of Sulfur-Based Composite: The Model
Surface Layer Composition Change under Irreversible Conditions of Particle Beam Action
The Influence of Thermal Diffusion on the Redistribution of Alloying Element between the Coating and Base under Surface Heating
Thermal-Diffusive Stability of Counterflow Premixed Flames at Low Lewis Numbers
Two Phase Model of Diffusion in Polycrystalline Material
Two-Temperature Two-Dimensional Model of Underground Shale Heating by Electromagnetic Field
Viscoelastoplastic Model of FCC Monocrystals Deformation: Identification of Parameters
Chapter 4: Applied and Computational Mechanics
Modeling the Dynamics of 3-D Elastic Anisotropic Solids Using Boundary Element Method
Heat and Mass Transfer in Viscous Fluid Flows in Open Cavities with Moving Boundaries under Cooling the External Contour
Evaluation of Gravitational Force Effect on Balancing Processes in Liquid-Type Autobalancing Devices
The Asymptotic Analysis of the Nonstationary Problem of Variable Shear Loading on the Boundary of an Incompressible Solid
Self-Similar Reflection of Longitudinal Shock Wave from Free Boundary in Elastic Medium
Dynamic Substructures Analysis of Combined Systems "Foundation - Structure - Equipment - Pipelines"
Correct Multilevel Discrete-Continual Finite Element Method of Structural Analysis
Chapter 5: Engineering of Machines and Mechanisms
An Apparatus for Implementing the Thermal Cycle for Plasma Surfacing of Metallurgical Equipment
Features of the Power Characteristics of the Vibration Isolators
Investigation of the Influence of Hydroimpulsive Mechanism Design Parameters on the Formed Impulse
Novel Techniques of Ceramic Shell Molds Production with Lost-Wax Method
On the Classification of Three-Link Mechanisms
Passenger Transport System of a Trestle Type for City Electric Transport
Rational Designing Two-Stage Anvil Block of Impact Mechanisms
Stress State and its Definition in Hardfacing Heat-Resistant Steel Cold Rolling Mill Rollers
The Balanced Two-Satellite Planetary Gear with the Equal Distribution of Loading on Satellites
Transformation of the Urban Electric Transport System when Using Autonomous Energy Sources
Chapter 6: Technologies of Electrophysical Methods of Materials Treatment
Effect of Magnetic Field Configuration of Dual Magnetron on Carbon Based Films Properties
Partial Discharges Characteristics in Oil Shale of Various Deposits
Plasma Processing in Industry of Building Materials
Plasmodynamic Synthesis of Nanodispersed Silicon Carbide
The Analysis of Shale Thermal Destruction Paths under Electrophysical Treatment
The Polarization of Silver Azide in Electric Field
The Reactive Deposition of TiOx Thin Films
Change of Structure and Mechanical Properties of R6M5 Steel Surface Layer at Electrolytic-Plasma Nitriding
Corrosion Resistance of Multilayer Ti-Ta Coatings Obtained by Electron Beam Cladding in the Atmosphere
Influence of Laser Beam Machining Strategy at SLS Synthesis
Layer-by-Layer Laser Sintering of Powders Irradiated by Gamma Quanta Co60
Spark Plasma Sintering of Mechanically Activated Ni and Al Powders
Structure and Properties of Coatings Obtained by Electron-Beam Cladding of Ti+C and Ti+B4C Powder Mixtures on Steel Specimens at Air Atmosphere
Structure and Properties of Surface Layers Obtained by Atmospheric Electron Beam Cladding of Graphite-Titanium Powder Mixture onto Titanium Substrate
The Application of Radio Frequency Magnetron Sputtering for Fluoropolymer Surface Modification
The Influence of Radio Frequency Magnetron Sputtering on Biodegradable Polymers Surface Properties
The Structural Particularities of Multilayered Metal-Intermetallic Composites Fabricated by the Spark Plasma Sintering Technology
Influence of Layer-by-Layer Laser Sintering Modes on the Thickness of Sintered Layer of Cobalt-Chromium-Molybdenum Powder
Research of Steel Structure after Laser Treatment
Effect of Gaseous Medium Pressure on Plasmadynamic Synthesis Product in the C-N System with Melamine
Magnetic Pulse Compaction of Oxide Powders of the (ZrO2 - Y2O3) - Al2O3 System
Surface Modification by Zr+ Ion Beam Irradiation of 12Cr1MoV and 30CrMnSiNi2 Steels for Improving Fatigue Durability
Sources with Different Spectra Radiation Influence on Plants Growth and Development
Chapter 7: Materials Processing Technologies in Mechanical Engineering
Investigating the Influence of the Power Supply Type upon the Properties of the Weld Joints under Manual Arc Welding
Influence of Technological Factors on Structure and Properties of Alumina-Zirconia Ceramics
Gas-Dynamic Impact of a Shielding Gas Jet on the Drop Transfer when Welding with a Consumable Electrode
Features of Steel Mouldings Production in Graphitic Shell Molds
Efficiency of Balancing by Liquid-Type Automatic Balancing Devices
Distribution Regularities of Shear Deformations in Incompressible Nonlinear Elastic Solids
A Decrease of Residual Stresses in the Elastic-Plastic-Creep Medium at Temperature Influence
Conjugate Heat Transfer in the Interaction of the Viscous Liquid with Technological Elements of Energy Systems in Conditions of their Internal Contour Moving
Boundary-Element Modeling of 3-D Poroelastic Half-Space Dynamics
Automatic Balancing Time of any Rotors at Full Speed
Engineering Analysis of Structural Variants of Corrugated Aperture in the Environment MSC.Patran/MSC.Marc
Numerical Modeling of Forming a Preform under High Temperature Creep
Stationary Rotation of the Partially Liquid-Filled Unbalanced Rotor under External Friction Force Action
The Study of Boroaluminizing in astes under Thermocycling and Laser Heating
Evaluation of the Resource Efficiency of Foundry Technologies: Methodological Aspect
Principal Indicators for Efficiency Assessment of Resource Management in Foundry Production
Chapter 8: Sensors, Measurements and Non-Destructive Control
Colorimetric Sensor Based on Silver Nanoparticle - Embedded Polymethacrylate Matrix
Computer Simulation of Cardiac Electrical Activity Using an Electrocardiograph on Nanosensors
Closure Welds Identification by Means of Ultrasonic Testing
Heavy-Loaded Components Quality Assurance by Means of Non-Destructive Testing
Investigation of Sensitivity of Aluminum Foil Based Strain Sensors at Fatigue Damage Evaluation of CFRP
Development of a Parallel Fast Fourier Transform-Based Algorithm for Digital Hologram Reconstruction
Development of Fiber Optic Current Sensor
Acoustic Field Simulation of an Antenna Array at Scanning by the SPA Method for Modern Ultrasonic Testing Technologies
Predictive Modelling of the Warming up Times for Thermoelectric Converters
Increasing the Efficiency of Using Hardware Resources for Time-Frequency Correlation Function Computation
Preprocessing of Coefficients for Reusable Continuous Wavelet Transform
Radiation Detection System
「Nielsen BookData」 より