High technology: research and applications : selected, peer reviewed papers from the International Conference for Young Scientists "High Technology: Research and Applications 2014" (HTRA 2014), March 26-28, 2014, Tomsk, Russia

著者

• International Conference for Young Scientists "High Technology: Research and Applications 2014"
• Bogdan, Anna
• Martyushev, Nikita

書誌事項

High technology: research and applications : selected, peer reviewed papers from the International Conference for Young Scientists "High Technology: Research and Applications 2014" (HTRA 2014), March 26-28, 2014, Tomsk, Russia

edited by Anna Bogdan and Nikita Martyushev

（Advanced materials research, v. 1040）

Trans Tech Publications, c2014

• : pbk

注記

Includes bibliographical references and indexes

内容説明・目次

内容説明

Volume is indexed by Thomson Reuters CPCI-S (WoS). Collection of selected, peer reviewed papers from the International Conference for Young Scientists "High Technology: Research and Applications 2014" (HTRA 2014), March 26-28, 2014, Tomsk, Russia. The 186 papers are grouped as follows: Chapter 1: Advanced Materials and Nanotechnology, Chapter 2: Chemical Technologies, Chapter 3: Simulation of Physical and Chemical Processes, Chapter 4: Applied and Computational Mechanics, Chapter 5: Engineering of Machines and Mechanisms, Chapter 6: Technologies of Electrophysical Methods of Materials Treatment, Chapter 7: Materials Processing Technologies in Mechanical Engineering, Chapter 8: Sensors, Measurements and Non-Destructive Control.

目次

Preface and Committees Chapter 1: Advanced Materials and Nanotechnology Antistatic Composite Co tings on the Basis of Powder Paints Application of Polymer Gel-Electrolytes for Cleaning and Restoration of Steel Objects Design and Investigation of Hard Metal Composites Modified by Nanoparticles Development of New Ni-Al Porous Alloys for Metal-Supported Solid Oxide Fuel Cells Effect of Thermomechanical Treatment on Superelasticity in Ni54Fe19Ga27 Single Crystals Electromagnetic Properties of W - Hexaferrites Composites with Magnetic Texture Electrophysical Characteristics of Metal-Insulator-Semiconductor Structures Comprising CdHgTe-Based Quantum Wells Evaluation of Physical and Mechanical Properties of Structural Components of Ti-Nb Alloy Formation of Coatings on Titanium Substrates Obtained from Mixtures of Tungsten and Cobalt Salts Using Shaped-Charge Explosion High Temperature Uranium Nitride Decomposition Influence of Surfactants on the Structure and Wear Resistance of Copper Alloyed Hypereutectoid Steel Investigation of Product Aluminum - Water Reaction Investigation of Genotoxicity of Gold Nanoparticles Prepared by the Electric Spark Dispersion Method Magnetic Structure of Nanosized Ferrimagnetic Particle Depending on External Parameters Materials of New Generation in Nuclear Power Industry Mineral Carriers for Nanoscale Additives in Bituminous Concrete Model of Polycrystalline Inelastic Deformation with Grain Boundary Sliding Description Molecular Dynamic Simulation of Carbon Nanostructures Formation Morphological, Physical and Chemical Characteristics of Biocompatible Nano-Sized Carbonate-Substituted Hydroxyapatite Nonlinearity of Dependence of Integral Friction Index of Tribosystem from Hydrophilic Properties of Surface-Modified Metal Fillers Numerical Simulation of Severe Plastic Deformation of Titanium Specimens under Dynamic Channel Pressing On Technological Uses of Local Strain Patterns of the Commercial Zr-Nb Alloys Orientation Dependence of Cycle Stability of Superelasticity Response in Quenched and Aged Ferromagnetic Co35Ni35Al30 Single Crystal Polymer Composite Materials Based on Ultra High Molecular Weight Polyethylene Matrix Filled by Alumina Powders Production and Quality Assessment of Superelastic Ti-Nb-Based Alloys for Medical Application Radioabsorbing Materials Based on Polyurethane with Carbon Fillers Research of Electromagnetic Properties of Composite Materials on the Basis of MWNTs in Microwave Range Role of Micro- and Nanofillers in Abrasive Wear of Composites Based on Ultra-High Molecular Weight Polyethylene Sintering of NiO/YSZ Anode Layers for Metal-Supported Solid Oxide Fuel Cell Structure and Properties of Multilayered Composite Materials "Nickel - Nickel Aluminide" Obtained Using SPS Method Structure and Tribotechnical Properties of Al-Sn Alloys Prepared by the Method of Liquid-Phase Sintering Study of Tungsten and Molybdenum Nanopowders Interaction with Sulphur in SHS Conditions and Synthesized Product Properties Technical and Economical Efficiency for Application of Nanomodified High-Strength Lightweight Concretes The Development of Photocatalytic Systems Entitled Titanium Dioxide Nanoparticles Attached to Polypropylene Fibrous Carrier for Freshwater Disinfection The Effect of Anisotropy in Polymeric Matrices on Compositional Properties at Various Temperatures The Fe-Core/Carbon-Shell Ultrafine Nanopowders as Platform for Biomolecules Grafting The Use of Alumina Nanoparticles as Modifiers of Galvanic Binder of Diamond Tools Transport of Reactants in Ultrathin Channels during the Etching Reaction Tribotechnical Properties of HA Nanocomposite Based on UHMWPE under Dry Sliding and Lubrication Tribotechnical Properties of UHMWPE Based Composite Filled with HA Microparticles under Dry Sliding and Lubrication Kinetics Flash Cathodoluminescence in Crystals with Nonstationary Defectiveness Copper Alloys Structure Parameters Fractographic Regularities in Fatigue Failure of 17Mn1Si Steel Improving Characteristics of Austenitic Steels by Modification Influence of Nanopowders on Corrosion Resistance of Welded Joints Investigation of the Properties of Alumina-Zirconia Ceramics Research into the Causes of the Cracking of Large Workpieces Low Carbon Steel by Pressure Treatment Chapter 2: Chemical Technologies 2-NSA, 1,5-NDSA Application and Sodium Naphtionate as Fluorescent Indicators at Oil Field New Effective and Environmental Friendly Method for the Hydrodediazoniation of Arenediazonium Tosylates Using Fe-Core/Carbon-Shell Nanoparticles Activation of Synthesis and Sintering of Mullite Aluminosilicate Ceramics Based on Natural Raw Materials Ceramic Pigments with the Diortosilicate Structure Based on the Dicalcium Silicate Decomposition and Preconcentration Methods for the Determination of Pt, Pd, Re in Mineral Raw Materials Determination of Au, Pb, Ni, Co in Silicate Rocs and Ores by Atomic Absorption Spectroscopy with Graphite Furnace Development of Radioactive Sources on the Basis of Bioinert Ceramic Materials for Medical Applications and their Pre-Clinical Testing Electrochemical Determination of Heparin in Pharmaceuticals with Using Malachite Green Electrochemical Response of Gold Nanoparticles at a Graphite Electrode Features of Processing of Ceramic Materials by an Electromagnetic Field Grafting of the Organic Functional Groups to the Iron Nanoparticles Surface via Arenediazonium Tosylates Heat-Insulating Materials Obtaining from Dispersive Screenings of Construction Sand Investigation of Lactobacilli Properties Liquid Phase Petroleum Resin Oxidation by Systems Based on Hydrogen Peroxide Liquid-Phase Oxidative Degradation of the Damaged or Expired Medicinal Products One-Pot Synthesis of Gelatinized Maize Starch-Graft-Polyacrylic Acid Films p-Nitrotoluene Bromination Using Barium Fluorobromate Ba(BrF4)2 Processes of Ultra- and Nanofiltration for Cleaning Solutions from Iron Colloid Substances Products of Reaction between Barium Chloride and Sodium Hyrdosilicates: Examination of Composition Radiation-Protective Composite Binder Extended with Barium Hydrosilicates Research of Water-Alcohol Solution Permittivity at Phase Transition by Radiophysics Method Some Peculiarities of Spin Manifestation in Isotope Effects Study of Mechanical Activation Processes of Mica Bearing Rocks Study of the Effect of Butylenes Content in Butane Fraction on Butane Dehydrogenation Process Study of the Graphite Electrode Surface with In and Pt Deposits Study of the Hydrodesulphurization Process of Hydrogenate of Shubarkol Coal Suppressing the Hydrogen Sulfide and Sulfur Dioxide Emission from Sulfur-Bituminous Concrete Synthesis and Characteristics of Melamine Formaldehyde Composites Synthesis of Highly Dispersed Pt Catalysts on MWCNTs via Hydrolytic Deposition without Preliminary Modification of the Support Synthesis of Silica Gel with Surface Layer of Transition Metals 8-Oxyquinolinates for Gas Chromatography Synthesis of Substituted Semicarbazone, Thiosemicarbazone and Aminoguanidine Synthesis of Trans- or Cis- Ethyl 5-Chloropent-4-Enoates Synthesis of -SiAlON Porous Ceramics by Filtrational Combustion of Reactive Foams in Nitrogen Flow The Synthesis of Iodbenzimidazoles and Iodbenzoxazoles via Iodination of Arenediazonium Tosylates Performance Evaluation of Plasma Sulphate Disposal Lignin Calculation and Optimization of Plasma Utilization Process of Inflammable Wastes after Spent Nuclear Fuel Recycling Sorption of Rhodamine into Polymer Block Matrix Combustion-Synthesized Porous Ni-Al Materials for Radiative Porous Burners Sol-Gel Synthesis of Chelate Containing Materials for Gas Chromatography Chapter 3: Simulation of Physical and Chemical Processes Crystal Plasticity Modeling of Duplex Steels at High Temperatures Development of Coupled Model of SHS-Extrusion Dynamics of Diffusion and Mechanical Waves Interaction under Conditions of Metal Surface Treatment with Particle Fluxes External Extreme Impacts on NPP Constructions - Methodology of Computational Simulation Math Modeling of Vacuum Conductive Timber Drying Mathematical Model of Iron Reduction with Aluminothermic Method Mathematical Modeling of Dispersed Condensed Substance Ignition by Local Energy Source Mathematical Modeling of Pulsed Electro Contact Sintering of Carbide Powder Composition Mathematical Modeling of the Solid Phase Sintering of Ti and Cu Powders in the Controlled Heating Conditions Model of the Oxygen Cutting Taking into Account the Melting of Metal Modeling of Gas Multistage Separation to Increase Stock Tank Oil Modeling of Physical and Chemical Processes of Anodic Bonding Technology Modeling of the Heat and Kinetic Phenomena Accompanying the Different Material Joining Using Solid-Phase Synthesis Modeling of the Sulfur-Bituminous Concrete Mix Compaction Numerical Comparison of Gas Flows through Plane Porous Heat-Evolutional Object with Axisymmetric one when Object's Outlet is Partially Closed Numerical Research of Heat and Mass Transfer Processes in Water Vapors and Gaseous Thermal Decomposition Products Mixture above the Combustible Wood on the Conditions of Chemical Reaction Termination in it Numerical Research of Physical and Chemical Processes at Polymeric Material Ignition by Several "Hot" Particles Numerical Research on the Influence of Autonomous Power Plant Condenser Design on Two-Phase Stream Parameters Numerical Study of the Heat Radiation from the Porous Cylindrical Burner with Radiative Heat Exchange Parallel Algorithm for Modeling of Dynamic Processes in Porous Media Phase Distribution and Stresses in the Coating Deposited from Plasma Quasi-Static Loading of Single Crystal Plasticity Analysis Residual Meso Stresses in Multilevel Crystal Plasticity Models Simulation and Modeling Software in Chemical Technology: Polymerization of Vinyl Chloride Some Aspects of Computer Approaches to Simulation of Bimodal Sphere Packing in Material Engineering Structure Formation of Sulfur-Based Composite: The Model Surface Layer Composition Change under Irreversible Conditions of Particle Beam Action The Influence of Thermal Diffusion on the Redistribution of Alloying Element between the Coating and Base under Surface Heating Thermal-Diffusive Stability of Counterflow Premixed Flames at Low Lewis Numbers Two Phase Model of Diffusion in Polycrystalline Material Two-Temperature Two-Dimensional Model of Underground Shale Heating by Electromagnetic Field Viscoelastoplastic Model of FCC Monocrystals Deformation: Identification of Parameters Chapter 4: Applied and Computational Mechanics Modeling the Dynamics of 3-D Elastic Anisotropic Solids Using Boundary Element Method Heat and Mass Transfer in Viscous Fluid Flows in Open Cavities with Moving Boundaries under Cooling the External Contour Evaluation of Gravitational Force Effect on Balancing Processes in Liquid-Type Autobalancing Devices The Asymptotic Analysis of the Nonstationary Problem of Variable Shear Loading on the Boundary of an Incompressible Solid Self-Similar Reflection of Longitudinal Shock Wave from Free Boundary in Elastic Medium Dynamic Substructures Analysis of Combined Systems "Foundation - Structure - Equipment - Pipelines" Correct Multilevel Discrete-Continual Finite Element Method of Structural Analysis Chapter 5: Engineering of Machines and Mechanisms An Apparatus for Implementing the Thermal Cycle for Plasma Surfacing of Metallurgical Equipment Features of the Power Characteristics of the Vibration Isolators Investigation of the Influence of Hydroimpulsive Mechanism Design Parameters on the Formed Impulse Novel Techniques of Ceramic Shell Molds Production with Lost-Wax Method On the Classification of Three-Link Mechanisms Passenger Transport System of a Trestle Type for City Electric Transport Rational Designing Two-Stage Anvil Block of Impact Mechanisms Stress State and its Definition in Hardfacing Heat-Resistant Steel Cold Rolling Mill Rollers The Balanced Two-Satellite Planetary Gear with the Equal Distribution of Loading on Satellites Transformation of the Urban Electric Transport System when Using Autonomous Energy Sources Chapter 6: Technologies of Electrophysical Methods of Materials Treatment Effect of Magnetic Field Configuration of Dual Magnetron on Carbon Based Films Properties Partial Discharges Characteristics in Oil Shale of Various Deposits Plasma Processing in Industry of Building Materials Plasmodynamic Synthesis of Nanodispersed Silicon Carbide The Analysis of Shale Thermal Destruction Paths under Electrophysical Treatment The Polarization of Silver Azide in Electric Field The Reactive Deposition of TiOx Thin Films Change of Structure and Mechanical Properties of R6M5 Steel Surface Layer at Electrolytic-Plasma Nitriding Corrosion Resistance of Multilayer Ti-Ta Coatings Obtained by Electron Beam Cladding in the Atmosphere Influence of Laser Beam Machining Strategy at SLS Synthesis Layer-by-Layer Laser Sintering of Powders Irradiated by Gamma Quanta Co60 Spark Plasma Sintering of Mechanically Activated Ni and Al Powders Structure and Properties of Coatings Obtained by Electron-Beam Cladding of Ti+C and Ti+B4C Powder Mixtures on Steel Specimens at Air Atmosphere Structure and Properties of Surface Layers Obtained by Atmospheric Electron Beam Cladding of Graphite-Titanium Powder Mixture onto Titanium Substrate The Application of Radio Frequency Magnetron Sputtering for Fluoropolymer Surface Modification The Influence of Radio Frequency Magnetron Sputtering on Biodegradable Polymers Surface Properties The Structural Particularities of Multilayered Metal-Intermetallic Composites Fabricated by the Spark Plasma Sintering Technology Influence of Layer-by-Layer Laser Sintering Modes on the Thickness of Sintered Layer of Cobalt-Chromium-Molybdenum Powder Research of Steel Structure after Laser Treatment Effect of Gaseous Medium Pressure on Plasmadynamic Synthesis Product in the C-N System with Melamine Magnetic Pulse Compaction of Oxide Powders of the (ZrO2 - Y2O3) - Al2O3 System Surface Modification by Zr+ Ion Beam Irradiation of 12Cr1MoV and 30CrMnSiNi2 Steels for Improving Fatigue Durability Sources with Different Spectra Radiation Influence on Plants Growth and Development Chapter 7: Materials Processing Technologies in Mechanical Engineering Investigating the Influence of the Power Supply Type upon the Properties of the Weld Joints under Manual Arc Welding Influence of Technological Factors on Structure and Properties of Alumina-Zirconia Ceramics Gas-Dynamic Impact of a Shielding Gas Jet on the Drop Transfer when Welding with a Consumable Electrode Features of Steel Mouldings Production in Graphitic Shell Molds Efficiency of Balancing by Liquid-Type Automatic Balancing Devices Distribution Regularities of Shear Deformations in Incompressible Nonlinear Elastic Solids A Decrease of Residual Stresses in the Elastic-Plastic-Creep Medium at Temperature Influence Conjugate Heat Transfer in the Interaction of the Viscous Liquid with Technological Elements of Energy Systems in Conditions of their Internal Contour Moving Boundary-Element Modeling of 3-D Poroelastic Half-Space Dynamics Automatic Balancing Time of any Rotors at Full Speed Engineering Analysis of Structural Variants of Corrugated Aperture in the Environment MSC.Patran/MSC.Marc Numerical Modeling of Forming a Preform under High Temperature Creep Stationary Rotation of the Partially Liquid-Filled Unbalanced Rotor under External Friction Force Action The Study of Boroaluminizing in astes under Thermocycling and Laser Heating Evaluation of the Resource Efficiency of Foundry Technologies: Methodological Aspect Principal Indicators for Efficiency Assessment of Resource Management in Foundry Production Chapter 8: Sensors, Measurements and Non-Destructive Control Colorimetric Sensor Based on Silver Nanoparticle - Embedded Polymethacrylate Matrix Computer Simulation of Cardiac Electrical Activity Using an Electrocardiograph on Nanosensors Closure Welds Identification by Means of Ultrasonic Testing Heavy-Loaded Components Quality Assurance by Means of Non-Destructive Testing Investigation of Sensitivity of Aluminum Foil Based Strain Sensors at Fatigue Damage Evaluation of CFRP Development of a Parallel Fast Fourier Transform-Based Algorithm for Digital Hologram Reconstruction Development of Fiber Optic Current Sensor Acoustic Field Simulation of an Antenna Array at Scanning by the SPA Method for Modern Ultrasonic Testing Technologies Predictive Modelling of the Warming up Times for Thermoelectric Converters Increasing the Efficiency of Using Hardware Resources for Time-Frequency Correlation Function Computation Preprocessing of Coefficients for Reusable Continuous Wavelet Transform Radiation Detection System

「Nielsen BookData」 より

詳細情報

• NII書誌ID(NCID): BB18509745
• ISBN:
  • 9783038352648
• 出版国コード: sz
• タイトル言語コード: eng
• 本文言語コード: eng
• 出版地: Pfaffikon
• ページ数/冊数: xx, 997 p.
• 大きさ: 24 cm
• 親書誌ID:
  • BA24926058