Frontiers of energy, materials and information engineering : selected, peer reviewed papers from the 2014 International Conference on Frontiers of Energy, Materials and Information Engineering (ICFMEI 2014), August 21-22, 2014, Hong Kong

著者

    • International Conference on Frontiers of Energy, Materials and Information Engineering
    • Kao, Jimmy C. M.
    • Sung, Wen-Pei
    • Chen, Ran

書誌事項

Frontiers of energy, materials and information engineering : selected, peer reviewed papers from the 2014 International Conference on Frontiers of Energy, Materials and Information Engineering (ICFMEI 2014), August 21-22, 2014, Hong Kong

edited by Jimmy (C.M.) Kao, Wen-Pei Sung and Ran Chen

(Advanced materials research, v. 1044-1045)

Trans Tech Publications, c2014

  • : [set]
  • Part 1
  • Part 2

大学図書館所蔵 件 / 1

この図書・雑誌をさがす

注記

Includes bibliographical references and indexes

内容説明・目次

内容説明

Collection of Selected, Peer Reviewed Papers from the 2014 International Conference on Frontiers of Energy, Materials and Information Engineering (ICFMEI 2014), August 21-22, 2014, Hong Kong. The 411 papers are grouped as follows: Chapter 1: Materials and Chemical Engineering and Technologies, Chapter 2: Power, Energy and Thermal Engineering, Environmental and Safety Engineering, Chapter 3: Civil and Building Engineering, Structural and Geotechnical Engineering, Applied Mechanics, Chapter 4: Mechatronics, Measurement and Detection, Control and Automation, Mechanics Applications, Chapter 5: Computer, Communication, Information, Algorithms and Numerical Methods of Data Processing Engineering, Chapter 6: Urban and City Development, Traffic and Transportation Engineering, Chapter 7: New Technologies in Education and Sports, Chapter 8: Engineering Management, Production Management, Business and Economics.

目次

Preface, Committees and Co-Sponsors Chapter 1: Materials and Chemical Engineering and Technologies A Kind of Novel Dual-Core High Birefringence Photonic Crystal Fiber Application of a New Type of Fiber in Knitted Garment Industry Bioactivities of Mimosa pudica and Phyllanthus niruri Crude Extracts Collected from the Locality of Chaiyaphum, Thailand Composition and Microstructure of Cement-Like Materials Synthesized by Solution Combustion Technique Cure Characteristics and Mechanical Properties of ZnO Nanoparticles as Activator in Unfilled Natural Rubber Dispersion and Degradation of Polycarbonate/MWCNT Nanocomposites with Melt Extrusion Effects of Build Orientations on Tensile Properties of PLA Material Processed by FDM Effects of Preparation Parameters on Morphology of Cellulose Nanowhiskers Electrochemical Behavior of Glucose Oxidase on Gold Electrode Modified by Poly(3, 4-Ethylenedioxy-Thiophene) Electrochemical Degradation of Benzene in Water Using Platinum Supported on Carbon Black Materials Experimental Research on Hard and Crack-Free Electrodeposited Chromium Coatings Influence of Pouring Temperature on the Solidification Characteristics of A357 Aluminium Alloy Interactions between TiAl and ZrO2 Face Coat during Centrifugal Investment Casting Investigation of Nucleation and Crystallization Behavior of Li2O-MgO-Al2O3-SiO2-MgF2 Glass-Ceramics System Investigation of the Influence of Electrolytic-Plasma Processing on Structural-Phase State and Mechanical Properties of the 40CrNiAl Alloy Nonlinear Simulation Analysis on Steel Concrete Composite Beam with Rubber Aggregate Numerical Simulation of Semi-Solid Die Casting Technology of Bearing Cage Performance of an Maleic Anhydride Based Polymers as Scale Inhibitor and Iron (III) Scaling in Industrial Cooling Water Systems Prediction of Solubilities for the Salt-Water System CaCl2-KCl-H2O at 348.15 K Preparation of Helical Monosubstituted Polyacetylene@CdSe Quantum Dots Composite and its Application for Low Infrared Emissivity Preparation of Photoluminescent ZnSe/PAMAM Nanocomposites Simple Synthesis of Mesoporous SnO2 Microspheres and their Gas Sensing Properties Study of Stress Distribution for Ceramic Materials in Human Denture by 3D Finite Element Model Study of the Attenuation Characteristic of Electromagnetic Waves in Plasma Sheath Study on Mechanical Properties and Mechanism of Sisal Fiber Cement Mortar Study on Preparation and Properties of Foam Rubber from Natural Rubber Ribbed Smoked Sheet Using Salt of Amino Alcohol and Carbonic Acid as Foaming Agent Synthesis and Effect of DCCA on the Ambient Pressure Dried, TEOS-Based Silica Aerogel Synthesis of Zeolite from Blast Furnace Slag Using Alkali Fusion with Addition of EDTA The Compatibility Research of the Organic Montmorillonites with SEBS The Compositional Effect of Water-Soluble POSS Hybrid PNIPA Nanocomposite Hydrogels The Effect of Polymerization Mode on the POSS Hybrid PVA Hydrogels The Effect of Reaction Parameters on the Structural NaYF4 Microcrystals The Effect of Water-Soluble POSS on the Swelling Behavior of Hybrid PDMAEMA Nanocomposite Hydrogels The Mechanical Properties and Microstructure of High Temperature Ti Alloys with Minor Addition The Study of Impact Behaviour of Two Types of Glass Fibre Reinforced Polymer (GFRP) Subjected to Low Velocity Impact Thermally Activated Delayed Fluorescence Materials Based on Carbazole/Sulfone Corrosion Resistance of Mg-Li Alloys Subjected to Different Heat Treatment Morphosynthesis of Hierarchically Structured LDHs Using Cellulose Templates Synthesis and Harmful Gas Sensing Properties of Zinc Oxide Modified Multi-Walled Carbon Nanotubes Composites Effects of Four Antistaling Agents on Preservation of Nan Feng Tangerines Spectroscopic Studies on the Interaction between Sulfadiazine and Human Serum Albumin Plastic Application in Product Design Research on the Durability of Reinforced Chemically Bonded Ceramics-Based Concrete Structural Members in Marine Environment Chapter 2: Power, Energy and Thermal Engineering, Environmental and Safety Engineering 3D Numerical Simulation on Failure of Cement Sheath of Macondo Well-#1 in Deep Water Gulf of Mexico A Research on Ignition of a Boiler by Using Coke-Oven Gas Instead of Light Oil and Alternation of the Boiler A Research on Microwave and Conventional Pyrolysis for Low Rank Coal A Study of Fenton's Oxidation Pretreatment on Dye Wastewater Containing Acetic Acid A Water Resource Distributed Detection System Based on Cloud Computing Technology An Analysis of the Impact of Safety Insecurity and Atmosphere on Safety Behavior An Analysis to the Understanding of Safety Equipment for Construction Workers An Investigation of Radiant Heat Distribution on Drying Area in the Chamber of Infrared Rotary Dryer Analysis for Mechanism of Becoming and Characterization of Cohesive Sediment of Tarim River Analysis of Water Quality and Control Countermeasures of Yazidang Reservoir in Ningxia, China Apparatus Determining Water Activity with Isopiestic Method and Measurement of Water Activity Application of the Blast Furnace Top Gas Instead of Nitrogen after Pressurizing Behavior of Flame Propagation in Biogas Spark Ignited Premix Combustion with Carbon Dioxide Inhibitor Benefit Analysis and FGD Optimization for Designed Power Plant Based on Comprehensive Benefit Index System Biodiesel Production from Waste Cooking Oil Using KCL/CaO as Catalyst Calculation for Power Consumption of Main Transformer Cooling System in Hydropower Plant Based on Pearson Correlation Coefficient Classification Prediction Method Used in Coal Crushing Construction of User Response Subsystem for Energy Efficiency of Electric Power Supply and Demand System Coordinated Control of Isolated Microgrid Including Wind Power, Storage and Seawater Desalination Load Design and Performance Evaluation of Hot Air-Microwave Continuous Belt Dryer for Drying Block Rubber STR 20 Design of X-Ku Band Wilkinson Power Divider Using Synthetic Quasi-TEM Transmission Line Diagnosis for Water and Steam Quality Problem in Taishan Ultra-Supercritical Power Plant Distribution of Octylphenol and Nonylphenol in the Sediment of Kaohsiung Harbor, Taiwan Effect of Fuel Injection Pressure & Fuel Supply Advance Angle on Characteristics of Butanol Diesel Blend Engine Effect of Solid Particle on Rough Thermo-Elastohydrodynamic Lubrication with Non-Newtonian Lubricant Environmental Worthiness Technology of Personal Protective Equipment Evaluation on Potential Ecological Risk of Heavy Metals in Soil of Yanjiao Experimental Studies on the Isothermal and Heat Transfer Performance of Trough Solar Power Collectors Experimental Study on Adsorption Capacity of Natural Gas Odorant Tetrahydrothiophene in Soil and Relevant Influencing Factors Fundamental Study of Energy Harvesting Using Thermoelectric Effect on Concrete Structure in Road Implementation and Application of QoS in Power Ethernet Switch Influence of Surfactant Sparys on Agglomeration of Inhalable Particle Legal Regulation of Vegetables Quality and Safety Numerical Simulation of Drag Coefficients for Multi-Bundled Power Transmission Conductors Numerical Simulation of Ignition of Coke-Oven Gas on an Industry Boiler Numerical Simulation of the Combustion and Emissions of HPDI Engine under Different Natural Gas Substitution Rate Optimization Design of High Frequency Transformer for Multiple Outputs Switching Power Supply Reliability Analysis for the Ignition System of Aviation Piston Engine in the GO Methodology Remediation of Marine Sediments Contaminated with PAHs Using Sodium Persulfate Activated by Temperature and Nanoscale Zero Valent Iron Remote Control of Heating System and Analysis of Energy Efficiency Research of Inlet Air Quantity for Mechanical Cooling Tower Research on a Portable Detection Device of DC Electric Energy in Electrical Vehicle Charging Station Research on Technology Roadmaps of the Wind Power Industry Based on Bibliometrics and AHP Method - A Case Study of Wind Blade Research Progress in Calculation Methods for Single-Well Dynamic Reserves of Gas Reservoirs Review of Power System Harmonic Source Location Method Based on State Assessment Risk Assessment on Fuzzy Fault Tree Analysis for Power Transmission Line Field Maintenance Work Simulating the Spread of Smoke in Hostel Fires Simulation Analysis of Temperature Field of Permanent Magnet Governor Single Longitudinal Mode Fiber Laser Based on Saturated Absorber Study on Environmental Protection Path via Government Procurement Study on the Rules of Sedimentation in Ningxia Shuidonggou Reservoir Supercritical Fluid Extraction of Lipids and Enrichment of DHA from Freshwater Fish Processing Wastes in Thailand Thermal Characteristic Analysis of Rectangular and Large-Capacity Lithium-Ion Power Batteries Air Gap between Protective Screen and Surface of Reinforced Concrete Cooling Tower Distribution and Origin of Organic Carbon, Nitrogen and Phosphorus in Kaohsiung Harbor Sediments Research on Reliability Evaluation Methods of Composite Generation and Transmission System Experimental Research of Stone Coal Mixed with Biomass Pyrolysis Differential Equation Based Adaptive Distance Relaying Setting Method for Series Compensated Line Fuzzy Comprehensive Evaluation of Water Quality Management Information System Research on Evaluation Method of Relay Protection Action Based on Fault Information Research on Optimization of Perforated Horizontal Wells with Separated Production Scheme Based on Genetic Algorithm Research on Physical Vulnerability Assessment Method of Grid Infrastructures - Taking Substation as an Example Review of the Relationship between Harmonic and Parallel Capacitor Fault The Comprehensive Assessment of Power Quality Based on Attribute Recognition Theory and AHP Algorithm Two Kinds of Models Based on Fiber Grating Sensing Technology to Calculate Overhead Lines Sag and their Performance Comparison Unit Commitment of Distribution Main Transformers Considering PV Penetration Review of New City Viaduct Noise Barrier Study on Building Climate Adaptability under the Condition of the Human Body Thermal Comfort - Taking Rural Houses in Shandong Peninsula as Example The Design of the Household Photovoltaic Power-Supply System with Intelligent Expansion Capacity Based on STM32 A Novel Method to Estimate the State of Health of each Cell in Battery Pack Research on HEV Drive System Based on Composite Electric Power Design and Optimization of Dense Phase Desulfurization Tower Chapter 3: Civil and Building Engineering, Structural and Geotechnical Engineering, Applied Mechanics A Study of the Planning Methods in the Underground Work of Top-Down Construction in High-Rise Buildings Design of Intelligent Building Security Systems Based on QFD High Resolution Sequence Stratigraphy Characteristics and Distribution of Donghe Sandstone in Qunkuqiake Region in Tarim Basin Pavement Performance of Asphalt Concrete Using Building Demolition Waste Simulation of Earthwork Load-and-Carry System Based on GPSS World Structural Behaviors of Hybrid High Performance RC Beams with Web Openings Using Hybrid Fibers The Analysis on the Example that the Comprehensive Application of Cuplok Scaffolding and Steel Tubular Scaffold with Couplers in Large Span Beam Structure Support The Mechanism of Monitoring and Incentive on Renewable Energy Building in Eco-City under the Background of New Urbanization Water Flow in Unsaturated Porous Media by Finite Element Analysis Quarry Wall Stability Assessment Using TLS Method Study on the Impact of Lateral Pressure on Jointed Rock Mass with DDARF Method Verticality Determining Methodology for the Reconstruction of a Building Shell - Analytical Solution Optimum Design for the Independent Foundation Based on Parameterized Model and Criteria Method Data Interpolation Methods by Inverse Distance Weighted Average Method between Multidisciplines Effect of Mica Content in Stone Powder of Manufactured Sand on Performance of Cement Mortar Dynamic Stability Analysis of Single-Layer Lattice Dome Considering Member Imperfections Manufacturing and Hoisting Technology for Reinforcement Cage of Deep Foundation Excavation Bored Piles Numerical Analysis of the Ball Mill Coupled with Vertical Vibration Numerical Analysis of the Surface Aerodynamic Noise of the CRH3 High Speed Train Numerical Analysis on Performance of Frame-Shear Structure with High Pile under Complex Load The Analysis about External Compressible Flow around an Aircraft Wing Application Retarders to Solve the Problem of Lift Joints The Study on Design Solution for Energy Efficiency of Existing Residential Building (EEERB) to Realize the 4th Energy Efficiency Target Investigations on the Wind Vibration Coefficient of Single Layer Lattice Barrel Vault Structures Chapter 4: Mechatronics, Measurement and Detection, Control and Automation, Mechanics Applications A Control Strategy with Series-Parallel Inverter for Micro-Grid Operation A Method to Compensate the Dead Time for Three-Phase PWM Inverters A New Method to Predict Gas Production Based on Fuzzy BP Artificial Neural Network A Prediction Model for Equivalent Parameters of Rolling Guide's Joint Accuracy Analysis of Robot Binocular Vision Calibration Active Infrared Thermography for Defect Detection of Polyethylene Pipes Agricultural Robot Localization Based on Camera Ranging Anti-Lock Braking System is Working Principle and Troubleshooting Application of Fuzzy Neural Network in the Intelligent Control of Biomass Gasifier Application of PCR-SSCP Technology in Microorganism Detection Augmented-Reality-Based Mechanical Fault Diagnosis Method Automatic Loading AGV Servo Controller Based on ARM and FPGA Automotive Anti-Collision Radar Signal Processing System Design Based on DSP Base of Control and Transmission Technology Based on PFC Prediction Algorithm of Cross-Cutting Machine Electronic CAM Control Simulation Comparative Study on Several PQ and V/f Controller Models in Micro-Grid Control of Thermal-Oxidative Degradation of Natural Rubber STR 5L by Using Cysteine Encapsulated with Alginate/Chitosan Microcapsules Current Intensity and Magnetic Field Measurement Based on Circular Coil Magnetic Inclination Design a PLC-Based Variable-Frequency Governing Pressure-Constant Water-Supply Control System Design and Application Analysis of Coal Mine Belt Conveyor Automation System Design for a S7-200-Based Boiler Temperature Cascade Control System Design of Auto Dust Collection System in Different Regions of Blackboard Design of Boiler Control System Model Based on Fuzzy Control Design of Two-Wheeled Self-Balancing Robot Control System Efficient Strip Belt Shelling and Air Suction Cleaning Units for Sunflower Seeds Ethernet-Based Data Acquisition Technology of Open CNC System Isotropic Design Method of Suspension System of Dithered RLG Strapdown Inertial Measurement Unit Machine-Learning-Based Mechanical Fault Diagnosis Method Maximum Power Control with a Boost Chopper and Grid Connection of PMSG Based Wind Turbine Mechanical Parts Defect Detection Method Based on Blind Source Separation Algorithm Micromagnetic Simulation of a Perpendicular Exchange-Coupled Magnet Minimal Control Synthesis-Skyhook Mixed Control for Magneto-Rheological Semi-Active Suspension Multi-Sensor N-P Criterion Fusion Detection Based on Weighting by SNR Optimization of Tension Control System for Cold Rolling Exit Section Prediction on Combat Effectiveness of Amphibious Assault Vehicles Based on Supporting-Vector Regression Radar Non-Contact Life Parameter Detection System Research of Screw-Machine Electrical Control System Based on IPC Research on Automatic Test Techniques of CTCS-2 Level Train Control Center Research on Intelligent Monitoring System on Tunnel Based on Neural Network Research on Kinematic for the Mechanism of Wheel-Leg Mobile Robot with Multi-Sports Mode Research on Monitoring Ice Thickness of Overhead Lines Based on FBG Sensor and Parabolic Method Simulation Research of Direct Torque Control for Marine Permanent Magnet Synchronous Motor Simulation Study on ESP Fuzzy Control Based on Road Automatic Identification Structure Design and Control for Multifunctional Paint-Device Study on the Fault Diagnosis of Gear Pump Based on PNN Neural Network Study on Vibratory Loads of Rotor with Trailing Edge Excitation System of Annealing Furnace Temperature Control Based on Neural Network Temperature Control System of Chamber Electromechanical Based on Incomplete Differential PID Algorithm The Design and Implementation of a Low Cost and High Precision Angle Measuring Device Typical PD Type of GIS, Transformer, Switchgear and other Substation Equipment Vehicle Stability Integrated Control Based on Adaptive Optimal Approach Virtual Manufacturing of Straight Bevel Gear Based on Pro/E Wildfire Voltage Control and Optimization of Distribution Network with DGs Based on Droop Characteristics Analysis of Fatigue for Mental Bellows Based on ANSYS Computer Aided Design of New Type PMSM Based on ISAD Converter Station VBE Signal Monitoring System Based on LabVIEW Research of Li-Ion Battery's Protection Circuit Used in AGV Research on Embedded Intelligent Vehicle Tracking Avoidance of Obstacle Oil Source Valve Optimized Design and its Application in Mechanical Loader The Application of TRIZ Theory in the Rub Drum of Reverse Data Acquistion and Modeling Detection of the Chinese Rice Wine Using an Electronic Tongue Offline Optimization of Parallel Hybrid Electric Vehicle Energy Management Strategy Based on the Dynamic Programming Study on Characteristics of Simple Inductance Circuit under Cut-Off Discharge Mode Study on Fault Location Technology of the OPGW Transmission Line Analysis of Time Series to Wear Tendency of Aero-Engines Damage Effectiveness Evaluation of Missile and Artillery Air Defense Group Chapter 5: Computer, Communication, Information, Algorithms and Numerical Methods of Data Processing Engineering A Corporate Computer Network Security System Design and Implementation A Design of Roadheader Simulation Training System A Detection Algorithm for Projectile Target A Direction of Arrival Estimation Method for Wideband LFM Signals Based on RWT and ESPRIT Algorithm A Distributed Index Tree and its Concurrency Control Algorithm A Fast Method of Motion Errors Compensation for High Squint Millimeter Wave SAR A Kind of DWT Domain Image Digital Watermarking Algorithm Research A Method of XML to RDB Mapping Based on XML Schema A New Approach for Developing Crossword Games A New MSLBOLSR Routing Algorithm A Novel Model for Human Activity Representation and Classification Based on Trajectory A Retrieval Model of Spatial Configuration Based on Space Syntax Histogram A Snapshot-Replay Method of Pseudo-Code Ranging under Frequency Limited Fading Channel A Time Prediction Method Using Modified Neural Network A Virtual Machine Migration Algorithm Based on Network Flow Balance Adaptive Newton Algorithm in Computing the Upper Bound of Structured Singular Value An Improved Algorithm for Ship Detection from the High-Resolution SAR Images An Improved Filter Algorithm Based on Prior Points An Object-Based Image Reducing Approach Analysis of Dance Approach in the Perspective of Multimedia Analysis of Forward-Looking Synthetic Aperture Radar Imaging Characteristics of Rotating Target Analysis of the Characteristics of the Background Ambient Noise Origin of Infrasound Station Analysising on the Library Services in the Age of Big Data Application and Study of Virtual Private Network Base on L2TP-IPSec Application of Synchronization Controlling for the Unified Chaos System in Secure Communication Application of Wireless Sensors in Underground Mine Communication Operation Attribute Reduction Based on Continuous Attribute Domain Automatic Extraction of Domain-Specific Terms Based on Binary Image Information Hiding Overview Based on Digital Image Forensics Double JPEG Compression Algorithm Based on the RMXP RPG Game Design and Implementation City Electronics Furniture Store System Order Based on ASP.NET Derivation of Exact Solutions for the (3+1)-Dimensional KP Equation with (G'/G2)-Expansion Method Design and Application of a Communication System Based on Codesys Design and Implementation of Mobile Learning Terminal Platform of Network Course Based on Android Design and Implementation of UDP-Based Coal Mines Enterprises Internal LAN Communications Software Design of a Novel EBG Structure for Antenna Arrays Detrended Fluctuation Analysis of Heart Rate Variability in Noise Exposure Driver of CAN BUS Based on ARM Cortex-M3 Efficiency Analysis of Command Networks with Different Cross-Level Embedded System Application in the Set-Top Box Extracting Foreground Based on Codebook for Early Forest Smoke Video Face Recognition Based on Eigenface Image Reconstruction and Fisherface Free Cooling in High Heat Density Data Centers Graph Embedding Method Based on Space Syntax and Improved K-Means Clustering Graphic Image Processing Technology in the Application of the Film and Television Creation Image Fusion Algorithm Based on Contourlet Transform Image Tampering with Evidence Algorithm Based on Copy and Paste Improved XCS in Classification Problems Infrared Target Detection Based on Temporal-Spatial Domain Fusion Intensity of Coal and Gas Outburst Prediction Model Based on the Improved BP Neural Network Laser Active Image De-Noising Algorithm Based on Lifting-Wavelet Matching Research of Binary Image Based on Canny Operator and SIFT Algorithm Method of Software Development Research Based on Mobile Platform Numerical Studies of X Band AbFSS Antenna Radome On the Comparison and Design of Computer-Aided Translation Software Optimal Deployment Based on Tree in Multilayer Mobile Sensor Network Oscillation Criteria of First Order Nonlinear Neutral Differential Equations Oscillation of Unstable Second Order Neutral Differential Equations with Positive and Negative Coefficients Performance Analyses of MCN with PH-Renewal Arrival Call and Services Preliminary Study of Multiband Smokescreen's Interference with TV Guidance Private Clouds Technique Based on Honeynet Program Design of Internet-Based Remote Video Monitoring System of Coal Mining Enterprises Real-Time Human Detection Based on the Improved Local Binary Pattern Recurrence Plot Analysis of HRV for Exposure to Low-Frequency Noise Redundant Feature Selection Methods in Text Classification Research and Design of Mobile Payment Platform Based on Hybrid APP Technology Research of from Theory to Practice about Computational Thinking Research of Multidimensional Dynamic Web Report Research of Reconfigurable Measurement Method Based on Mobile Terminal Research on Algorithm of Delaunay Triangulation Net Interpolating the Best Point Research on Anti-Jamming RF-EAS System Research on Connection Ending Protocol on Single-Layer User-Data Switching Platform Architecture Research on Fast-Speed Differential Light-Flow Algorithm Research on Network Information Security and Protection Reverse Validation Based Adaptive Particle Filter Algorithm for Object Tracking Review on Real-Time Communications Technology in Web Application Scheduling of Multi-Objective Imaging Observation Tasks for High-Altitude Airship Based on Improved NSGA-II Algorithm Segmented Auxiliary Power Model Based on Particle Swarm Optimization Smart Service-Awareness Based Multi-Agent QoS Control Model for Distribution Communication Network Study of Space-Surface Bistatic SAR Imaging Algorithms with COMPASS Signal Study on a Novel FSS-Absorber Radome Study on Data Processing in Optical Fiber Gas Sensing System Based on Membrane Computing Study on Dynamic IR Image Generation of Space Target Study on Electromagnetic Protection Technology of Mine Emergency Communication Command Works Study on Image Matching Based on Speed up Robust Features Method Study on Necessary and Sufficient Conditions for Euler Graph and Hamilton Graph Study on the Characteristics of High Speed near Field Communication Antenna Based on FDTD Study on the Method of Feature Extraction of Vegetable Diseases Based on Image Processing SVM-GMM Based Speaker Identification Technical Principle and Application of H3C IRF The Analysis and Design of the Dynamic Information Service System Network Architecture of the SOA Based on WAVE Technology The Application of Intelligence Distribution Network Communication Based on EPON The Application of Kernel Methods for Image Classification The Application of SIFT Method towards Image Registration The Design of the Enterprise Network Security Solutions The Development of Employee Information Management System The Oil and Gas Pipeline SCADA System Based on Cloud Computing and the Scheduling Algorithm The Present Botnet Protection Situation of the Data Center The Research and Development of Vehicle Network Platform Based on OBD Two Meta-Heuristics for Solving Unconstrained Optimization Problems and Machinery Problems University Data Center Design of IPv6 Deployment Valuable Tourism Information via Mobile Application Adaptive Ensemble Learning Recommendation Algorithm An IEC61850 Communication Model for Network Devices in Smart Substation Research and Application of SVG in the Feeder Data Analysis System Based on Ajax Research on Efficiency Evaluation Model of Electric Power Information System Infrared Image Preprocessing Based on Top-Hat Transformation and Self-Adaption Threshold Segmentation Research on Electric Power Communication Optical Fiber Transmission Network Evaluation and Optimization Method Speech Enhancement on Over-Complete Dictionary and Threshold Orthogonal Matching Pursuit Development of GIS PD Location System Based on LabVIEW Some Problems and Measures in the Characteristic Database Building of Library Development and Application of a NS PD Pulse Simulation Circuit Functional Requirements in Video-on-Demand Transmission System Optimized Collaborative Filtering Recommendation Based on User's Social Relationships Research on Facial Feature Detection Based on Correlation Analysis The Books Management System Management System Development Optical Fault Injection Attacks against Cipher Chip The Application of Web Data Mining Technology in E-Commerce Short-Term Hydrothermal Scheduling Based on Harmony Search Algorithm Chapter 6: Urban and City Development, Traffic and Transportation Engineering A Study on Land Use Scape Pattern Changes Based on Fractal Theory - Case Study of Mingcheng Town of Panshi City in Jilin Application of GIS-Technologies for Architectural Heritage Management Augmented Reality-Based Virtual Scenic and Tourism Culture Creative Platform Research The Research Reports of Urban Memory of Yichang Rural Tourism and Rural Development under the Integrated Planning Background - Huangtuling Village Tourist Plans in Laiyuan, Baoding City Occupancy and Road Capacity Model LED Roadway Lighting Control Scheme Based on TALQ Protocol Simple GPS Automatic Navigation Design Quality Control and Testing of CIPP Liners Highway Lane Detection Based on a New Gray Method Freeway Infrastructure Safety and Emergency Management System Chapter 7: New Technologies in Education and Sports A Research of the Application of Visual Simulation Technology in College English Teaching A Study on Improving the Quality of All-English Teaching Teachers in Science and Engineering Universities and Colleges Analysis of China's Sports Apparel Industry Marketing Strategy Vocational Colleges Application Research of Information Technology in Music Education Based on the Management of Japanese Teaching Methods to Explore Based on the Students' Application Ability of Japanese Teaching System Building Based on the Teachers Dominate the English Teaching Research C-Language Course Teaching Website Design and Implementation Cultural Interpretation of the Central Plains Martial Arts Development Measures to Enhance the Humanity Accomplishments in Vocational College History Teaching Feasibility Study Innovative "Sand Softball" Campaign Carried out in the Community Higher School Mental Health Education to Carry out the Way to Explore Higher Vocational College Physical Education Situation Analysis and Reform Internet Aided Teaching System Design and Implementation Microsoft Word Application in Sports Drawing Modern Information Technology and English Language Study Motivation Music Education Research at the Impact of Modern IT On the Bottleneck of the Cultural Value of National Traditional Sports and Solutions On the Development Situation of Volleyball Industry in College On the Emotion Regulation in the Training of Physical Education On Trend and Countermeasure of Subjectivity Ideological Education of College Students Our Colleges and Universities for Sports Information Management System Software Development Model Study Research on the Influence of Multimedia Teaching Technology of College Physical Education Teaching Study on Improving the In-Class Teaching Ability of Young Teachers in Science and Engineering Universities and Colleges Study on the Computer-Assisted English Writing Instruction The Application of Multimedia Technology in College Physical Teaching The Application of Virtual Reality in Engineering Education: A Case Study of the Virtual Storage Cavern System The Exploration of the Adult Higher Education's Location in the Ordinary Colleges and Universities The Informatization Teaching Design of "Design and Applications of Combinational Logic Circuits" The New Era College Education Reform and Development Trend of Exploration College Football - Construction of Self-Protection Methods to Luoyang Normal University Athletic Training Students as an Example A Study of Formative Assessment in Fostering College Students' Motivation on English Learning Computer Simulation of Kinetics Relationship between Gymnast and Mat Combined with the Characteristics of Materials Engineering Students Environmental Awareness On Sanda "Time Difference" and the Use of Training Methods The Exploration of Guangxi Traditional Ethnic Minority Sports Meeting in View of Industrialization Design on Monitoring and Management System of Large-Scale Instrument and Expensive Equipment Based on STC MCU Chapter 8: Engineering Management, Production Management, Business and Economics Alternative EPR Investment Optimizing Path & Modeling Analysis An ERBF Network Prediction of Taiwan's Crude Birth Rate Taking Economic Growth Rate and National Income Indices as Input Variables Analysis Model of Nuclear EPR Substitute for Coal EPR Design and Realization of the Credit Card Management System Double Game Theory: Be Described by China's Accession to the WTO and the Relations between Taiwan and the United States Effect of Gas and Electricity Price on Energy Consumption Rate for Residential Sector in Taiwan Based on Fuzzy Rules Exploration of Business Ethics Based on Economics Analysis Financial Management System Design of Guangxi Colleges and Universities Forecast of Regional Fly Ash Production and Sales Based on BP Neural Network Function Effects Post-Evaluation for Substation Construction Project Based on Multi-Level Extension Assessment Method In the Engineering Project of Legal Risk Control IT Impact Analysis of Human Resource Management Model Lean Production System Design and Implementation in Product Life Cycle Research on the Risk Programming Model Based on Nutch Research on VB+Access Knitting Clothing Enterprise Management System Based on Six Sigma Applications: Enhancement Sigma Level towards Quality Improvement at Automative Company State-Owned Banks Risk Management Research Study the Influence of the Implementation of Demand Side Management on Generation System Reliability The Application of VaR Methods in Financial Risk Management Research The Communication Management Research in the Process of ERP Implementation The Comparative Study of EOQ Newsboy and Silver-Meal Method for SMEs Business The Economic Analysis of Applying Top-Down Method on the Different Structure Types and Construction Methods The Study of Service Quality and Customer Loyalty of C2C Platform The System Development and Implementation of Design Drawings Management and Archive Combination Using BPNN to Predict Number of Low-Income Households in Taiwan Based on Seasonally Adjusted Annualized Rates for Real GDP Views of the Communication Security of Power Supply Enterprises A New Reducing Analysis Based on SVM for Farmers Professional Cooperative Management The Awareness of Brand Building and the Brand Building Strategic Actions of Chinese Health Food The Fact Research of the Equipment and Facilities Integrated Management IT System for Chinese Oil Company The Initial Research of RB Programming Model and Quantity System for Private Investor in China Future Markets The Core Values of the Brand of Chinese Health Food Ergonomics Layout Optimization of the Aircraft Cockpit Based on Particle Swarm Optimization Product Design Evaluation of Home Appliances Based on Fuzzy-AHP Fuzzy Decision Theory Applications in the Field of Oil and Gas Production and Operation EU Approaches to Unification of Methodologies for Determination of Building Object Life Cycle Costing Green Idea of Product Design Using ANN to Forecast Transportation Sector's Energy Consumption in Taiwan Based on Oil and Gas Price Research on Portable Electronic Equipment Design Based on Scenario-FBS Model

「Nielsen BookData」 より

関連文献: 1件中  1-1を表示

詳細情報

  • NII書誌ID(NCID)
    BB18512091
  • ISBN
    • 9783038352778
  • 出版国コード
    sz
  • タイトル言語コード
    eng
  • 本文言語コード
    eng
  • 出版地
    Pfaffikon
  • ページ数/冊数
    2 v. (1900 p.)
  • 大きさ
    24 cm
  • 親書誌ID
ページトップへ