Applied power and energy technology II : selected, peer reviewed papers from the 2014 2nd International Conference on Advances in Energy and Environmental Science (ICAEES 2014), June 21-22, 2014, Guangzhou, China
Author(s)
Bibliographic Information
Applied power and energy technology II : selected, peer reviewed papers from the 2014 2nd International Conference on Advances in Energy and Environmental Science (ICAEES 2014), June 21-22, 2014, Guangzhou, China
（Advanced materials research, v. 1008-1009）
Trans Tech Publications, c2014
- : [set]
- Part 1
- Part 2
Available at / 1 libraries
-
No Libraries matched.
- Remove all filters.
Note
Includes bibliographical references and indexes
Description and Table of Contents
Description
Collection of selected, peer reviewed papers from the 2014 2nd International Conference on Advances in Energy and Environmental Science (ICAEES 2014), June 21-22, 2014, Guangzhou, China.
The 297 papers are grouped as follows:
Chapter 1: Development and Utilization of Solar Energy,
Chapter 2: Development and Utilization of Biomass Energy,
Chapter 3: Development and Utilization of Wind Energy,
Chapter 4: Nuclear Energy and Other Energy,
Chapter 5: Energy Chemical Engineering and Fuel Cell,
Chapter 6: New Energy Vehicles and Electric Vehicles,
Chapter 7: Power System, Automation and Control,
Chapter 8: High Voltage and Insulation Technology,
Chapter 9: Power Electronics,
Chapter 10: Smart Grid Technology and Intelligent Technology,
Chapter 11: Power Systems Management,
Chapter 12: Engineering Thermodynamics and Thermal Engineering,
Chapter 13: Power Machinery and Engineering,
Chapter 14: HVACR and Heat Pumps,
Chapter 15: Equipment Design, Manufacturing and Automation,
Chapter 16: Building Materials and Constructions, Green and Energy-Efficient Buildings, Applied Mechanics,
Chapter 17: Development and Management of the Energy and Resources Industry,
Chapter 18: Computer and Information Technologies Applications, Mathematical Modeling for Industry Development,
Chapter 19: Engineering and Engineering Management Education
Table of Contents
Preface and Conference Organization
Chapter 1: Development and Utilization of Solar Energy
A Social Publics' Evaluation for Promotion Priority of Solar Energy Policy in Taiwan Based on Analytical Hierarchy Process
Measuring and Evaluating Solar Radiative Properties of a Shading Plant
Research of Solar Refrigeration Technology
Research on Modeling and Control Strategy for Two-Stage Photovoltaic Grid-Connected System
The Calculation and Analysis of UAV Solar Array Power Generation
A New Technique to Improve the Efficiency of Output Power Solar Panel Using PIC 18F4550 Microcontroller
Exergy Analysis of Concentrated Solar CHP System for Building Scale Utilization
Research of Available Capability of Accommodating PV Power Generation of Tibet Power Grid Based on Capacity of Peak Load Regulation Constraints
Research of Off-Grid Household Photovoltaic Power System
Study Experiment of Energy Harvesting System Based on Solar and Vibration
The Study on the Energy Saving of Wall Mounted Solar Capillary Low-Temperature Hot Water Radiant Heating System
Experimental Study on the Heat Exchanger Performance of Parabolic Trough Solar Water Heater
MPPT Strategy of PV System Based on Adaptive Fuzzy Control
Stimulation and Optimization of Parabolic Trough Solar Hot Water System
Electrical Generation of Dye-Sensitized Solar Cells Using Sensitizer from Rose Flower
Performance Comparison between Dyes on Single Layered TiO2 Dye Sensitized Solar Cell
The Comparative Analysis of the Stratospheric Airship Power Supply System
Chapter 2: Development and Utilization of Biomass Energy
Analytic Hierarchy Process of Environmental Social Groups for Promoting Biomass Energy in Taiwan
Biomass Production of Switchgrass in Saline-Alkali Land
Study on Sugar Production Conditions of Dilute Sulfuric Acid Hydrolysis of Corn Straw
The Influence Factors of Biodiesel Preparation from Waste Cooking Oil via Acid Catalyst
The Investigation Based on Heating with Biomass Energy for Biogas Digesters Winter Gas Production Technology in Cold Regions
Comparison of Pretreatments for Lignocellulosic Biomass
Crystallization Status of Palm Oil Biodiesel under Low Temperature Environment
Mesophilic Anaerobic Digestion of Dairy Manure and Vegetable Waste Using Batch Reactor
Using a Novel FCE Model to Evaluate the Industry Competitiveness of Biomass Power Generation
Chapter 3: Development and Utilization of Wind Energy
Identifying the Attitude of Environmental Practitioners toward Policy for Promoting Wind Energy in Taiwan Using Analytical Hierarchy Process
Short-Term Forecast and Error Analysis of Wind Power Based on Weight Factors
The Study on Turbulence Intensity Based on CFD in the Wind Farm
The Topological Structure Analysis of Novel Cascaded Wind Power Generation System
Analysis of Short-Circuit Calculation in Microgrid with Wind/Solar Micro-Sources Based on IEC STANDARD 60909
Modal Analysis and Simulation of SSR for DFIG-Based Wind Farms
Research the Influencing Factors of the Low Wind Speed Wind Turbine Fatigue Loads
The Distributed Intelligent Lubricating System for Wind Turbines
The Reserve Capacity Model Based on the Idea of Scenario in Power System
Use of the Savonius Wind Turbine for the Needs of Public Lighting
Wind Power Prediction Model Based on ARMA and Improved BP-ANN
Energy Efficiency Evaluation of Wind Energy Based on Energy Reports
Vibration and Damping Analysis of Carbon Fiber Wind Turbine Blade with Viscoelastic Damping Treatment
Study on Transient Stability of Circulation Economy Power System with High Penetration of Wind Power
Research of Fine and Robust State Estimation
Optimized Dispatch for Power Grid Connected with Wind Farm Based on Interval Simulation
Chapter 4: Nuclear Energy and Other Energy
Discussion and Application of Passive Hydrogen Recombiner in Qinshan Phase II Nuclear Power Plant
Research on the Assessment Standard for the Tidal Current Energy (TCE) Resource Calculation of China
Study on Performance of Ground Source Heat Pump Systems Based on Site Tests
Feed-Water Enthalpy Rise Optimum Distribution Mechanism Model of PWR Nuclear Power Unit Based on Genetic Algorithm
Research on Fabrication Process of ITER Composite Axial Insulation Break
Chapter 5: Energy Chemical Engineering and Fuel Cell
Effect of Dissolved Oxygen Content on Gelling Strength of Chromium Gel in Block Hai 1
Effects of Zn on Pyrolysis Characteristics of Shenhua Lignite
Effects of Zn on Steam Gasification Characteristics of Shenhua Lignite Char
Evaluation and Prediction of Coalbed Gas Fracturing Fluid
Fuel Cell System Performance Prediction Model and Validation Based on Radial Basis Function
Study on the Process Analysis and Kinetics during the Co-Pyrolysis of Low Rank Coal and Enteromorpha
Temperature Characteristics of Li-Ion Batteries
Thermogravimetric Study on the Combustion Characteristics of Corn Stalk and Low Volatile Coal
Chemical Agents Formula of Deep Profile Controlling for Niuxintuo Fractured Reservoir
Contribution of Sulfate-Reducing Bacteria to the Electricity Generation in Microbial Fuel Cells
Dehydrogenation of Propane to Propene over Mesoporous ZrO2-Supported VCrO Catalysts
Effect of Shape and Modification over ZSM-5 Catalyst on Methanol to Gasoline
Influence of a Combined Low Dosage Gas Hydrate Inhibitor on Methane Hydrate Surface
Low-Temperature Co-Pyrolysis Products of Low Rank Coal and Enteromorpha
Research on Hydrothermal Modification of Heavy Oil
Synthesis of Glycerol Carbonate by Transesterification of Glycerol with Dimethyl Carbonate over Mg-Al Mixed Oxides Supported on MCM-41
Tribological Property of some Triazine Derivatives in Hydrogenated Oil
Energy Chemical Engineering (Topic Field) Simulation for Influence of High Pressure on Release of Inorganic Species during Combustion of Pakistani Coal
Research and Application Advances in Supersonic Swirling Separator
Characterization and Application Process Optimization of CuO/ -Al2O3 Catalyst in CWAO Technology
Property of Mn-Doped Fe2O3 and its Effect on CO Adsorption
Consequence Analysis of Jet Fire Accidents Occurred in Salt Cavern Natural Gas Storage: Hazard Distance and its Influence Factors
Research and Application of Technology of Mobile Electric Ignition Technology for Fire Flood in Vertical Hole
Thermal Decomposition Synthesis of MoO3 for Application in Electrochemical Supercapacitors
Chapter 6: New Energy Vehicles and Electric Vehicles
The Research on Hybrid Electric Power System for Renewable Energy UAVs
A Travel Distance Power Consumption Model for Battery Electric Vehicles
Research on Charge and Discharge Strategy for Centralized EVs Charging Stations
The Research Status and Development Trend of Electric Vehicle Power Supply Technology
Chapter 7: Power System, Automation and Control
Effectiveness Assessment of Black Start Schemes Based on Data Envelopment Analysis from the Perspective of Power Grid Crisis
Optimization of Reactive Power Compensation Rate in 20kV Cable Distribution Network
Single-Phase Grid-Connected PV System Island Effect Detection Based on Active Output Power Change Method
Comparison of the Two Decomposition and Coordination Algorithms for Reactive Power Optimization Based on Proximal Center Algorithm
Enhance Power System Transient Voltage Stability by Difference Coefficient of Generator Excitation System Optimization
Improved Equivalent Resistance Method for Low-Voltage Distribution Line Loss Calculation
Interval Reactive Power Optimization for Distribution System with DGs
Island Mode of Low Capacity Generators Operation
Modeling of Aging Transformer Failure Rate and the Retirement Timing Decision
Modeling of Traction Power Supply System Based on the User-Defined Model of PSASP
Power System Low Frequency Oscillation of Resonance Mechanism Induced by Disturbance of Turbine Governing System
Research on Parameter Stability Region of Governor System
Simulation Study on Anomalous Commutation Failure in Multi-Infeed HVDC Systems
The Forecasting Track of Power Grid Operation State Based on Risk Assessment
The Optimal Configuration of Feeder Switches in DAS Based on Pareto Optimality Solution
A Chaos Particle Swarm Optimization Algorithm for Optimal Power Flow
A Novel System Splitting Scheme Based on the Identification of Weak Connection
An Investigation of the Negative Resistance in Network Reduction and Electromagnetic Transient Modelling
Analysis of Influence Factors and Rules of Transformer Neutral Point DC
Effect of Prime Mover Governor Parameters on Low Frequency Oscillation
Study on the Analysis Software of Economic Operation of Transformer
Research on Control Method and the Structure Design of Asynchronous Modular Contactor
Vector Control of the BDFG for Ship Shaft Standalone Power Generation System
Wireless Temperature Monitoring System Based on ZIGBEE
Experimental Study of Coal Moisture Content Measurement System Based on Standing-Wave Ratio
Research on the Workload of the Controller-to-Be Based on the Radar Simulator
Variation Characteristics of Geoelectric Field in Mid-to-Low Latitude Area during Geomagnetic Storms
Design and Development of Power System for Transmission Line Online Monitor Device
Electrical Equipment Life Cycle Monitoring
Implementation of Experimental Platform of Shipboard Power System
Research on Intelligent FCL to Realize Seamless Power Supply between the Port and Ship for Energy Conservation and Emissions Reduction
Analysis and Design on Course Control for Sail-Assisted Ship
Research on Heat/Power Load Optimizing Distribution Model of Heating Units Based on Gene Sequencing Method
Analysis and Application of Power Balance in Self-Powered Sensor
Study on Acoustic Model of Transformer
Parametric Study of Transmission Line Fitting Vibration Damper Based on Modal Analysis
Chapter 8: High Voltage and Insulation Technology
Analysis of Heat Transfer Process and the Finite Element Model of the 10kV Three-Core Pipe Cables
Research on Dynamic Characteristics of 10kv Three-Core Cable Layers of Material Thermal Resistance
Study on the Steady State Thermal Circuit Model of 10kV Three-Core Cable Based on the Shape Factor Method
Electric Field Analysis with Space Charge Effects of +/-1000kV DC Wall Bushing
The UHVDC Transmission Line Lightning Disturbance Identification Based on the Morphology
A Study on Porcelain Insulator Flashover Voltage Evaluation System on Atmospheric Pollution Condition
Polymeric Insulation: Advantages and Disadvantages
The FTIR Analysis of Field Aged Composite Insulators
Modeling and Simulation of Cascaded STATCOM Based on RTDS
Research on the Time and Space Characteristic of Argon Dielectric Barrier Discharge at Atmospheric Pressure
Chapter 9: Power Electronics
10KW/100KHZ High Frequency Induction Heating Power Supply Design
Automobile Engine Fault Diagnosis and Prediction System
Research and Development of Multiple Protocol Compatible Device Managing System
Design ADRC for Cutter Suction Dredger Cutter Motor Variable Frequency Drive System
Design of Temperature Control System about Pakistan Antiseptic Machine Based on Fuzzy Theory
Realization of NAND FLASH Control Glueless Interface Circuit
Study of Induction Heating Power Supply Based on 74HC4046
The FPGA Implementation of Single-Precision Floating-Point Adder
Design Theory and Operating Principle of Temperature Control System about Pakistan Antiseptic Machine Based on Fuzzy Theory
Chapter 10: Smart Grid Technology and Intelligent Technology
Research and Application of Disturbance Environment Simulation for Power Dispatching System Considering Electrical and Non-Electrical Data
Research on Access Network Communication Technology for Condition Monitoring System of Power Transmission Line
Research on Tuning Protection with Distributed Power Distribution Grid
A Closed-Loop Test System for Network Performance of Smart Substation
A New Kind of Smart Dual DSP2812 Power Quality Monitor Based on Dedicated Users
An Improved RBF Neural Network for Short Term Load Forecasting
Analysis on Capacity Evaluation Model and Optimization Algorithm for Meshed Power Collection Grid
Research on Scheduling Strategy for Distribution Network with the Access of Multi-Microgrids Including PV/WT/ST
A Review of Distribution Network Planning with Large-Scale Intermittent Renewable Energy Access to Distribution Network
Study on the Operation Electricity Price of Active Distribution Network
Offline Configuration Resources about Smart Substation Multi-Dimensional and Multi-Objective Customization and Information Merger
Research on the Substation 3D Real Scene Surveillance
Transient Stability Emergency Control Research Based on Critical Machine Unit
The Research of Control Strategy Based on Hierarchical Consistency Algorithm in Active Distribution Network
Chapter 11: Power Systems Management
A Practical Evaluation Method for Human Security Risk in Single Operation of Power Supplying
AHP Analysis in the Step Tariff of Electricity Program in Decision-Making in Research
Power Grid Crisis Management under the Natural Disasters in Extreme Weather
Research of "Foreign Electricity to Enter Jiangxi" Ensure Electricity Supply
Chapter 11: Power Systems Management
Research on Transmission Line Corridors Moving Target Video Detection Device
Searching Method of Core Backbone Grid Based on Biogeography-Based Optimization Algorithm
The Effect of Meteorology Factors on Power Load in High-Temperature Seasons
Economic Evaluation Model of Grid Construction Project Based on Real Option Theory
The Analysis and Evaluation of Tendering and Bidding Procurement of Electric Power Equipment Based on Value Engineering
The Research on Production Operation Risk Management of the Power Supply Enterprises
Application of Distributed Generation in the Emergency Control of Power Supply Systems
Estimation of Reduction Depreciation Charges in Power Network when DG Source is Connecting
Determination of the Minimal Error of Power Consumption Forecast by Regression Analysis
The Staged Decision Model of Key Grid Project: Based on the Real Option Theory
Chapter 12: Engineering Thermodynamics and Thermal Engineering
Discussions of Traditional Ignition Temperature Methods with DTA Principle and a New DTG-DTA Method Establishment
Full-Spectrum k-Distribution Model for Radiation in Gas Based on Multi-Group Methods
Narrow Band k-Distribution Model for Radiative Calculations of Non-Gray Gas
Calculation and Design Method Study of the Coil-Wound Heat Exchanger
Molecular Dynamics Study of Thermal Conduction in Carbon Dioxide Hydrates
Research on Cryogenic Characteristics in Spatial Cold-Shield System
The Experimental Study and Simplified Model of Water Mist Absorbing Heat Radiation
Energy Efficiency Analysis on Drying Viscose Fiber in Superheated Steam and Hot Air
Optimization of a Sintering Waste Heat Power Unit
Analyses on Effect of Helix Angle on the Continuous Helical Baffles Heat Exchanger
Numerical Simulation of Three Dimensional Unsteady Flow of the Ruston Turbine in Stirred Tank
Effect of the Flow Models on the Numerical Simulation of Shell and Tube Heat Exchanger
Simulation Research on Air-Liquid Hydraulic Resonance for Enhancing Surge Pressure
Study on Flow Patterns and Separation Performance of Liquid-Gas Separator Units
Characteristic Analysis of the Influence of Flow Rate Distribution in Each Flat Tube of Parallel Flow Heat Exchanger to Heat Transfer
Comparison and Selection of Different Types of Boiler Soot-Blowers
The Parameters Analysis of Lead Bismuth-Heat Transfer Device in the Water Side
Numerical Simulation of the Liquid Flowing and Evaporation outside the Tube of the Evaporative Air Cooler
Chapter 13: Power Machinery and Engineering
Effect of Turbocharged Diesel Engine Operating Conditions on Intake Premixed Methanol Quantity and Performance
Research on Simulation of LNG Vaporization System on LNG Powered Ships
Simulation Model of Gas-Cooler of Flue Gas Compressor in a 300 MW Oxy-Fuel Pulverized Coal Fired Boiler
The Static Strength Analysis on Two Certain Types of Cylinder Blocks of the Diesel Engine
The Static Strength and Fatigue Strength Analysis of a Certain Type of Cooling Fan
Two-Phase Stirring Flow Analysis of the Ruston Turbine in Stirred Tank
Vibration Fault Diagnosis for Wind Turbine Based on Enhanced Supervised Locally Linear Embedding
Dynamic Characteristics and Mathematical Models of Filled Level for Ball Mills with Double Inlets and Outlets
Emissions Characteristics of a Diesel Engine with GTL and Biodiesel Fuels
Experimental Study on Spray Characteristics of N-Butanol/Acidic Oil/Diesel Blends
Injector Nozzle Multiphase Flow Numerical Simulation of High Pressure Common Rail System
Prediction of Ice Shape for Three-Dimensional Engine Inlet Based on the Proper Orthogonal Decomposition Method
Research Progress on Control Technology of Diesel Engine NOX and PM Emissions
Study on Rotational Speed Intelligent Regulation of Diesel Generator Based on Fuzzy PID Algorithm
Research of Diesel Engine Waste Heat Organic Rankine System
A High Effcient Brushless DC Motor Drive Technology for Solar Array
Lissajous Curve of an Auxiliary Winding Voltage Park Components for Diagnosing Induction Motor Inverter Defects
Chapter 14: HVACR and Heat Pumps
Economic Analysis of Central Heating on Typical Climate Areas of China
Experimental Study on Discharge Coefficients of Windward Window in Buildings with Wind-Driven Cross Ventilation
Numerical Analysis of Elevator Piston Effect on Building Airflow for an Air-Conditioned High-Rise Building in Winter
Applying Virtualwind Software to Analyze Indoor Natural Ventilation of Traditional Dwelling Architecture - Experiences from the Panxi Village, Jingdezhen City, Jiangxi Province, China
Fuzzy Comprehensive Evaluation of System Performance for Vuilleumier Cycle Heat Pump Driven by Solar, Geo-Thermal and Biomass Energy
Research on the Region Division for Supercritical CO2 Cooling Heat Transfer in Gas Cooler
Thermal Comfort Study of Wall Hanging Air-Conditioning Office in Summer
Discussion on the Application of the Plug Fan Parallel
Analysis of Temperature Field and Stress Field around Vertical U-Tube Exchange Used in Ground Source Heat Pump
The Ecological Optimal Performances of an Irreversible Four-Heat-Source Refrigerator
Frequency Control of Fan and Pump in Flue Gas Desulfurization for Energy Saving and Environment Protection
Investigation of the Technical Proposals for Cogeneration Plant in China
Chapter 15: Equipment Design, Manufacturing and Automation
Research on Cryogenic Property Inspection Technology of Cryogenic Vessels with Valve
Research on High Voltage Switch Mechanical Properties Calibration Technology
Scanning Measurement of Coated Glass Color-Difference and Design of Anti-Interference
Stochastic Simulation of Crack Growth in Hydrogenating and Cycling High-Strength Steels via Cloud Computing
Buckle Propagation Analysis of Deep-Water Petroleum Transmission Pipelines with Axial Tension
Improvement of Edge Etcher System
Design and Simulation of Supersonic Swirling Separator
Design of Simulating Control System on Fresh Water Generator
The Common Failures and Solutions of High TOC Analyzer
220/110 kV 250 MVA Autotransformer Kit
Electric Power Systems Kit
Research on the Design of the Interactive Display Function and the Functional Matrix
Application of Fuzzy Petri Nets in Hydraulic Pump Fault Diagnosis
Research on the Performance of Point Absorber
Design of Medium Pressure Water Asphalt Heating Equipment
The Design of Intelligent Arm Using in Traffic Conductor
The Application of Frequency Converter Energy-Saving Technology for Air Compressor in Intelligent Industrial Park
Chapter 16: Building Materials and Constructions, Green and Energy-Efficient Buildings, Applied Mechanics
Finite Element Analysis of Chinese Traditional Hall-Style Timber Structure
Finite Element Analysis of Typical Beam-Column Joints in Yingxian Wood Pagoda
Loading Height on Reinforced Brick Masonry Wall's Failure Mode and Seismic Performance with Finite Element Analysis Method
Mechanical Properties of Structural Chuan-Dou Style Wooden Structure
Static and Dynamic Elastic-Plastic Analysis of a Storey-Adding Structure
Structural Analysis of a North China Large-Span Aqueduct with Pretensioned Steel Truss
The Effect of Friction at the Strip Footings' Underside on the Expansion of Plastic Zones in Subgrade
The Influence Law of Thermal Properties on Building Thermal Stability in Hot-Humid and Cold-Humid Area
The Seismic Performance Analysis of Brick Masonry Wall between Windows
The Seismic Performance Analysis of the Adding Storey Frame Structure with Isolation Device
Typical Brackets Dimensional Numerical Simulation of the Wooden Structure
Analysis of the Impact of Fine Aggregate Content on the Performance of Asphalt Mixture
Architectural Performalism Based on Energy Issues
Based on the ANSYS Analysis of the Open Hole in the Floor Cracks
Comparative Study of New Construction and Renovation Project Based on Carbon Emission
Design of Building Energy Consumption Monitoring System
Development of and Defect Prevention in Novel Monocomponent Polyurethane Waterproof Coating
Numerical Calculation of Photovoltaic Sunshade Component's Shading Coefficient
Physical Simulation Study on Transverse Effect of Bolted Discontinuous Rock Mass
Research on Carrying Capacity Evaluation of some Reinforced Concrete Bridge under the Special Type Load
The Calculation of Truss Deformation Using ANASYS
The Energy-Saving and Land-Saving Utilization on Solar Radiation of Mountain Traditional Dwellings in East Shanxi - Take Hedi Town and Sandu Village as Examples
The Engineering Examples of Sustainable Architecture
The Innovation and Development about Spatial Form of Traditional Cave Dwellings in the Northwest
The Life-Cycle Energy Consumption Distribution of Buildings in China
The Seismic Performance Analysis of the Abnormal Joints Core Area of the Reinforced Concrete Frame Variable Beam Shaped
Analysis of a New Flexible Hinged Frame Anchoring System
Field Tests of 4 Types of Cool Roof System to Reduce Cooling Load
The Analysis of Annual Dynamic Effective Daylighting on High-Rise Office Building in Jinan
Optimization of Pass Design of Bidirectional Thermal-Insulation Bricks
Effects of Old Aggregate on Concrete Strength
Literature Review: Mechanical Properties of Hardened Silica Fume Concrete
Analysis of Thord Stress Concentration Factors of KKK Shape Square Steel Tube Node
Damage Simulation of Masonry Wall Based on the Finite Element Software Abaqus
Evaluation of Cement Slurry Performance in HaiTa District Subject
Study on Energy Consumption and Energy Saving Measures in Shanghai
Research on Air Filters' Low-Order Mode Characteristics Based on Hyper Works
Research and Application of Special Shaped Muffler Structure
Chapter 17: Development and Management of the Energy and Resources Industry
Complexity of Nonlinear Dynamic Outputs Model in the Electricity Triopoly
Research on the Distribution of Patented Technologies of the Energy-Saving Industry in China
The Mutual Development of the New Energy Industry and the Traditional Energy Industry in China
A Review of the Research of New Energy Industry Development
Comprehensive Evaluation and Analysis of China's Energy Security
On how to Improve China's New Energy Industry Development: From the Science and Technology Policy Perspective
Performance Evaluation of Coal-Fired Power Plant Energy Conservation and Emission Reduction Based on Set Pair Analysis
Research on Beijing Safety Guarantee System for Natural Gas Supply
Research on China's Photovoltaic Industry Policy Based on Domestic Demand in Post Financial Crisis Era
Research on Renewable Energy Technology Selection Model Based on Fuzzy Comprehensive Evaluation in Beijing
Some Thoughts on Coastal Nuclear Power Construction's Safety
Study on the Informatization of Renewable Resources Industry
The Application Mode of Energy Big Data and its Enlightenment for Power Grid Enterprises
Study on Layout Planning System of Renewable Energy Utilization on Heating Based on GIS
Application and Analysis of Multi-Source Hybrid Distributed Energy System
Research on the Flywheel Energy Storage System Applied in Green Architecture
Analysis of Polycrystalline Silicon-Photovoltaic Industry's Key Technologies Development and Influences on its Cost and Energy-Consumption
Chapter 18: Computer and Information Technologies Applications, Mathematical Modeling for Industry Development
Design of Intelligent Agricultural Management System Based on Internet of Things Technology
Research on Bus Stop Based on Cellular Automaton Model
The Design of the Central Kitchen Logistics Distribution System
A Class of Nonlinear Weakly Singularity Wendroff Type Integral Inequality with Two Variables and Application
Design and Implementation of an OFDM System with Interleaving and De-Interleaving Based on FPGA
Empirical Likelihood Testing for Linear Instrumental Variable Regression Models
Estimation of the Unknown Function of Integral Inequality with Power Function and its Application
Feature Extraction by Decryption to Target
Multidimensional Resource Scheduling in Cloud Data Centers
Upper and Lower Bounds of Unknown Functions in Several Nonlinear Integral Inequalities in Engineering
An Prevent Drunk Driving System Based on Embedded System
Numerical Simulation Method of Track Irregularities Based on Secondary Filtering
The Application of Data Mining in the Community Characteristics Analysis of University Students
The Management Information System Design of Coal Enterprise
The Influence of Service Quality on Customer Satisfaction in Theme Parks Design of Taiwan
Noise Effect on Multifractal Detrended Fluctuation Analysis Based on Element Enrichment Model
Chapter 19: Engineering and Engineering Management Education
A Knowledge Transformation Model in Software Development Process
Construction and Practice of the College Course System of Self-Management
Influence from International Organizations on Higher Professional Education-Case Study of Higher Maritime Education
Research on Application of Micro-Blog in Mobile Learning
by "Nielsen BookData"
