Applied energy and power engineering IV : selected, peer reviewed papers from the 4th International Conference on Energy, Environment and Sustainable Development (EESD 2014), October 25-26, 2014, Nanjing, China
著者
書誌事項
Applied energy and power engineering IV : selected, peer reviewed papers from the 4th International Conference on Energy, Environment and Sustainable Development (EESD 2014), October 25-26, 2014, Nanjing, China
（Advanced materials research, v. 1070-1072）
Trans Tech Publications, c2015
- : [set]
- Part 1
- Part 2
- Part 3
大学図書館所蔵 件 / 全1件
-
Part 1A25118/1070-1400074046,
Part 2A25118/1070-2400074054, Part 3A25118/1070-3400074062 -
該当する所蔵館はありません
- すべての絞り込み条件を解除する
注記
Includes bibliographical references and indexes
内容説明・目次
内容説明
Collection of Selected, Peer Reviewed Papers from the 4th International Conference on Energy, Environment and Sustainable Development (EESD 2014), October 25-26, 2014, Nanjing, China.
The 387 Papers are Grouped as Follows:
Chapter 1: Development and Utilization of Solar Energy;
Chapter 2: Development and Utilization of Biomass Energy;
Chapter 3: Development and Utilization of Wind Energy;
Chapter 4: Nuclear Energy and other Energy;
Chapter 5: Energy-Saving and Energy-Storage Technology;
Chapter 6: Energy Chemical Engineering, Energy Materials and Fuel Cell;
Chapter 7: Power System and Automation;
Chapter 8: High Voltage Equipment and Insulation Technology;
Chapter 9: Electrical Machines and Apparatus, Power Drives;
Chapter 10: Smart Grid and Microgrid Technologies;
Chapter 11: Power Systems Management;
Chapter 12: Electrotechnics, Low Voltage Electronics and Power Supply;
Chapter 13: New Energy Vehicles and Electric Vehicles;
Chapter 14: Engineering Thermodynamics and Thermal Engineering in Designing of Energy Equipment;
Chapter 15: Details and Units of Power Machines;
Chapter 16: Fluids and Flow Engineering in Designing of Energy Machines;
Chapter 17: HVAC, Air Conditioning and Refrigeration;
Chapter 18: Computer Applications and Mathematical Modeling
目次
Preface and Conference Organization
Chapter 1: Development and Utilization of Solar Energy
Analysis of Limit Angle Deviation for the Spot of Solar Simulator
Development of Wind-Solar-Diesel-Battery Integrated Seawater Desalination Device
The Solar-GSHP System Applied in the Administrative Regiona of a TYPICAL Port
Comparative Analysis of Inverter Topology for Highly Efficient Single-Phase Photovoltaic Generation System
Design and Research of Integrated PV and Storage Grid-Connected Generation System
Solar Temperature Difference of a Complementary Power Generation Device for Automotive Applications
Strategy for Grid-Connection Control of Photovoltaic System
Study on the Heat Transfer Mechanism of Ceramic Solar Collector
Development Status and Measures of China's Photovoltaic Power Industry under the International Background
Optimization of Photovoltaic Array Configurations in Photovoltaic System
Study on Automatic Control Method of Photovoltaic Power Systems
Study on Solar Photovoltaic Tracking System Based on Servo Control
The Effect of Digital Process of Single-Phase Photovoltaic Grid Connected Inverter
The Feasibility Study of Distributed Photovoltaic Power Generation System in Western Region of China
The Influence of Distributed Photovoltaic Access to Distribution Network on Voltage Profile
Chapter 2: Development and Utilization of Biomass Energy
Thermogravimetric and Pyrolysis Kinetic Analysis of Elmwood
Conversion of Biomass-Derived Glycolide to Ethylene Glycol over Cu
Development of the Straw Based Power Generation in China: A Critical Analysis
Influence of Catalyst on Direct Ethyl Lactate Production from Glucose and Ethanol
Analysis and Optimization of Fuel Delivery Advance Angle of Waste Cooking Oil Biodiesel Using MATLAB
Cellulolytic Enzyme Lignin Efficiently Blended with Polycaprolactone: Thermal, Mechanical Properties and Morphological Evaluation
Biodiesel Production from Waste Cooking Oils by Using Immobilized Microorganisms as Whole Cell Catalysts
Effects of Silage Additives on Biogas Production of Hybrid Penisetum
Isolation and Preliminary Identification of Cellulose-Decomposing Microorganisms Form Bamboo Forest
Selective Depolymerization of Sulfuric Acid Pretreated Wheat Stalk under Microwave-Irradiation
Torrefaction of Biomass: Effect of Temperature on the Properties of Liquid and Gaseous Products
Biomass Energy - Effective Utilization of Crop Straws
Thermodynamic Analysis of Ethanol-Diesel Oil and Waste Heat Recovery for Diesel Engines
Thermogravimetric Study on the Co-Pyrolysis Characteristics of Bituminous Coal and Wheat Straw
Triglycerides Catalytic Hydroconversion into Bio-Aviation Fuels Based on Temperature by One-Step
Effect of Carbon Sources and Fe3+ on the Growth and Lipid Accumulation of Monoraphidium sp. FXY-10 under Mixotrophic Culture Condition
Chapter 3: Development and Utilization of Wind Energy
"Source to Source" Active Coordinated Control Technique Based on Large-Scale Wind Power Connecting to the Grid
A Probability Distribution Model to Simulate Wind Power Output Fluctuation
Effects of Surge on Rotor Aerodynamics of Offshore Floating Wind Turbine
Study on Influence of High-Energy Load Accommodating to Wind Power by Layer on Network Loss
Analysis of Stakeholders' Behaviors in the Development of China's Wind Power Industry
Containing Wind Farm Power System Probabilistic Optimal Power Flow Calculation Using the Method of Combined Cumulants and Gram-Charlier Expansion
Mechanism Research about Impact of Large-Scale Wind Power Integration on Grid Loss
Research on Inverter Side Steady Operation of Direct-Drive Permanent Magnet Synchronous Wind Power System
A Review on Low Voltage Ride-Through Solutions for PMSG Wind Turbine
Analysis on the Wind Turbines Current Influenced by the Impedance Variation of Low Voltage Ride through Test Device
Analysis of System Key Variables under Power Fluctuation from Wind Power Cluster
Coordinated Reactive Power and Voltage Control Based on Doubly-Fed Wind Farm Cluster
Doubly Fed of Induction Generators Wind Turbine Frequency Control Based on Power Curve of Inertia Control and Pitch Angle Control
Equivalent P-v Model of Wind Farm Based on Measured Data
Generator-Side Converter Control Strategies of Synchronous Wind Turbines Based on the MPPT
Optimization of Large Scale Energy Storage System for Relaxing Wind Power Centralized Transmission Bottlenecks
Regional Wind Energy Resource Forecasting Based on SVD and Support Vector Machine
Research of Bidirectional Power Flow Algorithm of Micro-Grid Based on the Improved Zbus Method
Research on Short-Circuit Current of Wind Power System and its Impact on Relay Protection
Sharing of Unbalanced Loads in an Isolated Distributed Generation System with Droop Controlled Doubly Fed Induction Generator
Study on Identification of Wind Turbine Power Characteristic Curve by Genetic Algorithm
Study on Transient Stability Simulation of District Grid Containing High Proportion of Wind Power
Vulnerability Assessment for Large-Scale Wind Farm
Wind Speed Change and Influence on Wind Energy in Recent 50 Years over Hexi Corridor
Economic Operation Research of Wind and Pumped Storage Co-Generation System
An Adaptive Chaos Quantum-Behaved Particle Swarm Optimization Algorithm for Real-Time Dispatch in Power System with Wind Generation
Assessment of Offshore Wind Resource in China Using CFSR Data
Detached Eddy Simulation of the Flow over Bolund
RBF Neural Network Wind Power Prediction Based on Chaos Theory
Time Sequence Coordination Frequency Control Strategy Design of Wind Farm
Wind Power Fluctuation Smoothing of Double-Fed Induction Generator by Using Confining Factor
Risk Assessment of Power System with Wind Farm Considering Weather Impacts
A Study on the Application of Abandoned Wind Electricity in Thermal Power Plant's Heat Recovery System
Chapter 4: Nuclear Energy and other Energy
A Comparative Study on Long-Term Energy Efficiency of Two Kinds of Ground-Source Heat Pump Systems
Use of Nuclear Energy and Sustainable Development
Preliminary Core Design and Optimization Analysis of Travelling Wave Reactor
Analysis of Negative Sequence Operation Characteristics for Nuclear Half Speed Steam Turbine Generator
Analysis of Nuclear Power Industry's Sustainable Development in China from the Perspective of Innovation Ecosystem
Chapter 5: Energy-Saving and Energy-Storage Technology
Application of Distributed Energy Storage
Research of Large LNG Tank Structure
Study on the Effect of Foreign Direct Investment and Foreign Trade on Energy Efficiency in the Yangtze Delta Region Using Stochastic Frontier Analysis Approach
Investigation into the Application Prospects of Energy Storage Technologies Proposed for West Inner Mongolia Power Grid
The Study of Fuel-Saving Technology of GSI
Analysis of Operations Optimization of a 600MW Coal-Fired Power Plant
Efficiency Analysis of Low-Grade Energy Recovery System Based on Scroll Expander
Optimal Capacity Allocation for Supercapacitor Energy Storage System in Power Grid Primary Frequency Regulation
Research on Application of Energy Storage Technology in Renewable Energy Source Generation
Super-Cooling Suppression of Microencapsulated PCM
Energy Saving Potential on Centrifugal Water Chillers with Frequency Converter System: A Case Study in China
Heat Recycling of PCS Power Inverter on Energy Storage Device
Study on Dispersion Behavior of TiO2 Nanoparticles in PCM for Air-Conditioning System
The Numerical Prediction and Safety Analysis of Alternative Fuels Leakage Accident during Storage and Transportation
Study on Charging and Discharging Characteristics of Energy Storage System in Wind Storage Power Plant under the Condition of Black Start
An Operating Control Strategy of Zinc Bromine Flow Battery Energy Storage Systems in Microgrid
Chapter 6: Energy Chemical Engineering, Energy Materials and Fuel Cell
High Reversible Capacity of Nitrogen-Doped Graphene as an Anode Material for Lithium-Ion Batteries
Polyaniline@MnO2/Graphene Oxide Ternary Composites for Electrochemical Supercapacitors
Research Progress in Gasochromics Mechanism of Tungsten Oxide Thin Films
Effects of Post-Annealing Temperature on the Structure and Electrical Properties of N-Doped ZnO Films
Modulation of Low Bias Negative Differential Resistance in a Molecular Device by Adjusting Anchoring Groups
Novel Two-Dimensional Carbon Nanomaterials: Synthesis and Excellent Lithium Storage Properties
SFA-SDC Composite Cathodes Fabricated with Glycine-Nitrate Process for Intermediate-Temperature Solid Oxide Fuel Cells
A Review of Graphene Supported Electrocatalysts for Direct Methanol Fuel Cells
Combustion Behavior and Combustion-Supporting Mechanism of KMnO4 on Mixing Pulverized Coals and Semicoke in Blast Furnace Injection
Desulfurization Effect of High-Sulfur Weibei Coal of Assisted by Microwave Irradiation and Ultrasonic Wave
Analysis on Failure of Oxide Layer of T91 High Temperature Superheater Tube
Chemical Kinetic Research on Flame Characteristics of Ethylene under High CO2 Concentration Atmosphere
Corrosion Failure Analysis and Corrosion Performance Comparison of Condenser Copper Tubes
Effect of Oxygen Gas on Corrosion Behavior of Electro-Polymerization PANI Coating in PEMFC Environments
Fast Charging Lead-Acid Battery Technology Theory Analysis
Hierarchically Porous Carbon/MnO2 Nanocomposites as High-Performance Electrode for Asymmetric Supercapacitors
Influence of Nitric Acid Oxidation on the Supercapacitive Performance of Mesoporous Carbons with Different Pore Symmetries
Influencing Factors and Techniques of Carbon Nanotube Assembly by Dielectrophoresis
Progress of Research on Li-Rich Cathode Materials xLi2MnO3*(1-x) LiMO2(M=Ni, Co, Mn...) for Li-Ion Battery
Study on the Effects of Hydrogen Addition on Ignition Delay of Surrogate Fuel for RP-3 Kerosene
Superior Cycling Performance of Sulfurized Polyacrylonitrile Cathode Assembled with In Situ Polymerized Gel Polymer Electrolyte
The Experiment of Flushing Gelled Crude Oil which Stick on the Wall during Hydraulic Suspension Transportation
Pulverized Coal-Fired Flame Temperature and Emissivity Measurement Based on Spectral Analysis and the Two-Color Method
A Review on Low-Temperature Oxidation of Lignite: Oxygen Transport, Effects of Drying and Measures for Restraining Coal Oxidation
A Variable Frequency Pulse Fast Charging Technique for Li-Ion Batteries Based on Fuzzy Control
Improvement of Si-Betavoltaic Batteries Technology
Stretching Induced Crystalline-Phase Transition in Energy-Conversion Poly(Vinylidene Fluoride) (PVDF) Films
Thermoelectric Performance of Twisted Graphene Nanoribbons
Performance InGaN and AlGaInP LED Characteristic Dependence on Quantum Wells
Calculation of Complexion in Chemical Precursor for ZnSe as Buffer-Window Layer of CIGS Solar Cell
Study on Preparation of CdS Quantum Dots for Dye Sensitized Solar Cells
Research for Photoelectric Property of SnO2 Vacancy Doped Cu
An Investigation on Dye-Sensitized Solar Cell Performance Influenced by Radiant Intensity and Illuminated Area in Concentrating Photovoltaic System
Photovoltaic Performance and Long-Term Stability of Hybrid ZnO/TiOPc Solar Cells with DH- 6T as an Electron Blocking Layer
Study on the Electrical Properties and the Ac Conductance Response of ZnO-Based Varistor
Synthesis and Characterization of 5-Hexyl Benzothiadiazole
Research on the Depositon of CdS Quantum Dots on TiO2 Inverse Opal
Chapter 7: Power System and Automation
Analysis and Design of Temperature Monitoring Device for Switchgear Cabinet Based on Resonant Coupling Wireless Energy Supply
Analysis of Busbar-Line Transformer Economic Operation Mode
Assessment on Power System Black-Start Schemes Based on Entropy-Weighted and Improved Analytic Hierarchy Process Algorithm
Optimal Allocation Research of Distributed Generation Based on Improved Particle Swarm Optimization Algorithm
Analysis and Improvement of the Power Flow Transferring Identification Method Based on DC Sensitivity Factors
Analysis on Line Differential Protection Based on Transient Saturation Characteristics of TPY-Type Current Transformer
Application of Fault Location Method Based on Multi-Source Fault Information in Repair of Distribution Network
Chapter 7: Power System and Automation
Based the Active Defense Substation Domain Strategy Control Method to against Blackout
Implementation of Power Network Disturbance Identification System
A Cross-Platform Assistant System for 110kV Transformer's Differential Protection Calibration Based on Mobile Terminal
A Multi-Dimensional Method for Nodal Load Forecasting
A New Fault Location Method for Distribution Network Based on Traveling Wave Theory
A New Method of Three-Phase Unbalanced Load Harmonic Current Detection
A Novel Adaptive Preconditioner Based CPF-GMRES Algorithm
An HBase-Based Platform for Massive Power Data Storage in Power System
Application of Power Quality Disturbance Location Based on MUDW
Application of Speech Interactive Technology in the Future Grid Scheduling System
A Method of Acquiring and Processing GIC Signal in High-Speed Rail Track Circuit
A Method of Dispatching Automation Master System Software Testing Based on Cloud Computing Technology
Application of Modbus Protocol in the Automatic Safety Device
Design of the Architecture of Power Grid's Device Monitoring System
Fault Location Method Based on Transient Frequency in Non-Effectively Grounded Distribution Network
Harmonic Analysis of Non-Sinusoidal Harmonic Signals in Electric Power System
Implementation of Newton Method for Power System Points of Collapse Evaluation
Modeling & Simulating of Hami-Zhengzhou UHVDC Transmission Project and Security & Stability Analysis of Send-Side Power System
Optimal Placement of DG Unit in Distribution System
Parallel Program Design and Development of Large-Scale Grid Topology Analysis
Reactive Power Optimization for Distribution Network with Distributed Generators Based on Semi-Definite Programming
Research on Grid Structural Vulnerability Based on Improved Electrical Betweenness
Research on Optimal Allocation of Microgrid System Based on Two Layers of Coordinated Dispatch
Short-Circuit Current Calculation of a Power System with a Grid-Connected Inverter
Study and Application of Integrated Online Check of the Counties
The Theoretical Line Loss Calculation Software of Graphical Distribution Network Based on the Secondary Development of Visio
Power Flow Method for Distribution Systems Based on the Current Network Equation
Fast Algorithms of Line Outage Distribution Factors with Cascading Failures
Fast Search of Dangerous Lines in Power Flow Transferring in Power System
Faulted Section Identification Method Based on the Transient Current Distribution for the NUGS
Fluctuation Magnitude Calculation and Oscillation Probability Analysis of Tie-Line Active Power in Interconnected Power System
Implementation Mode of Distribution Automation at Switching Station
Research on the WAMS Real-Time Data Processing Based on the Message Bus
Speed Control System Model Parameter Error Evaluation Based on PMU Data
Study on the Control of Distributed Generation System
Study on the Optimum Location of PSS in Power Systems
Comparative Analysis of the Calculation Results of Online Short-Circuit Current Based on PSASP and Fault Wave Recording
Study on Blackout Model for Power Grid Growth Process
Effect of Wind Power Integration on the Self-Excitation Risks in Weak Interconnection Power Grid
Determination of Voltage Stability Margin by PQ Curve for Wind Power Integrated System
Mechanism Research about Impact of Transmission Channel Power Constraint on Grid Loss with Large-Scale Wind Power Integration
Penetration Capacity Analysis of Distributed Generation Considering Overcurrent Relay Protection and Flux-Coupling Type FCL
Sensitivity Model to Power Flow Control Capability Using Controllable Series Compensators
The Application of Electronic Communication Relay Protection in Distribution Network with Distributed Generation
Probabilistic Load Flow Based on Cumulant Method Considering Multi-Slack Balance
Method of Cluster Zoning for Voltage Regulation in Nodes of Power System
Risk Assessment of Substation Main Connection Based on LCC Management
An Universal Realization of Power Dispatching Operation Expert System
Comprehensive Evaluation of Grid-Connected Distributed Generation Operation
Research and Development of Disturbance Source Positioning System Based on WAMS Data
A Study on Bilateral Trade Model for Shanghai Grid under the Constraints of Mandatory Environmental Indicators
System Transient Stability with Distributed Generation
Chapter 8: High Voltage Equipment and Insulation Technology
Study on Overvoltage and Insulation Coordination of DC Filter for UHVDC Project
The Study of Denoising Algorithm for Partial Discharge Signal Based on the Wavelet
The Study on TiO2 Nano-Powder's Influence on the Power Frequency Breakdown Properties of Transformer Oil
A Load Test Research on Large Power Transformers
Design of 110kV/2kA High Temperature Superconducting Cable Termination Stress Cones
Insulation Optimization of +/-1000kV DC Wall Bushing
Power Transformers Health Index Calculation Method Based on Cloud Model and Fuzzy Evidential Reasoning
Shunt Reactors Compensation Research of UHV Accessed to Jiangxi Power Grid
Study on Protection Configuration of Power Supply in 220kV Electric Railway Traction Substation
Testing and Diagnosis of Extra High Voltage Power Cables Using Damped AC Voltages Combined with Distributed Partial Discharge Measurement
Simulation Research of the Impact on Sensitivity by Structural Parameters of Disc-Type Inner UHF Sensors Used for GIS PD Detection
Analysis on Lightning Withstand Level of Back Striking Flashover for Double-Circuit Transmission Line
Study on Technical Parameters for 220/20kV SF6 Gas Insulated Transformers
Study on Typical Diversion Structures and Fault of 220kV Cable-Conductor Bushings
Research on Field Management of Relay Protection Device Based on RFID Technology
Study on Movable Equipment for Realizing Seamless On-Shore Seamless Power Supply for Berthing Vessels
Electromagnetic Parameters Extraction of Electronic Current Transformer Based on Finite Element Modeling
Research on Error Characteristic of the Protective Current Transformer in High Remanence Environment
Analysis of the Influence of Magnetic Field on Voltage Error of Three-Phase Three-Element Combined Transformer
Direct Power Control of Doubly Fed Induction Generator Based on the Estimated Stator Flux
Predictive Direct Capacitor Power Control Based on Fractional-Order PID Controller of Three-Phase Voltage Source PWM Rectifiers
Research of Test Data of Critical Process Parameters Regarding Tension Stringing Construction of 1250mm2 Large-Section Conductor
Research on Project Test Tensioning of 1250mm2 Large-Section Conductor
Residual Life Assessment of Power Transformer Based on Random Fuzzy Theory
The Research of Mobile LVRT Testing Device in High Altitude Area
Characteristics Simulation of Ultra-High Frequency Electromagnetic Wave Excited by Equivalent Partical Discharge Mathematical Model in GIS
Comparison of Application of SVC and STATCOM on Suppressing Subsynchronous Oscillation
Problem Analysis and Solutions in Transformer Field Verification
Characteristic Analysis of Ship Transformer Magnetizing Inrush Current and its Suppression Method
Calculation of Electric Field under Overhead Lines with a Human Body Existing
A New Method for Partial Discharge Signal Processing
Influence of Corona Discharge on SAW Temperature Measurement System
Software Design and Implementation of Measuring System of Transmission Lines Based on Wireless Communication
Calculation and Optimization of Cable Connector Electric Field Intensity in High Speed Rail Based on Finite Element
Analysis of Sound Insulation of Substation Barrier
Chapter 9: Electrical Machines and Apparatus, Power Drives
Diagnosis of Bearing Faults of Induction Motors by Spectral Analysis of Stator Currents
Static Characteristics Analysis for Induction Motors
Extension Comprehensive Assessment of the Operating State of Turbo-Generator
An Adaptive Speed Control Approach for Sensorless Brushless DC Motors
The Complex Equivalent Circuit of the Multiple Three-Phase Synchronous Motor
Application of Fuzzy-PI Controller in the Asynchronous Motor
Research on Identification Model of Stator Core Temperature Rise of a Generator
Study on Optimal Dynamic Braking Resistor of Induction Motor
A Complete Decoupling PI Control of UPQC in - Coordinate System
Sliding Mode Variable Structure Direct Instantaneous Power Control of Grid-Connected Converter with an LCL Filter
Simulation Analysis of Snubber Circuit for SiC MOSFET Inverter
Analysis of PCC Point Harmonics Caused by Nonlinearities of Grid-Tied PV Inverters
Harmonic Characteristic Analysis of Five-Phase Space Vector PWM
Research on Constant Frequency Electrical Angle Start Method of LCI
The Development of Multi-Functional Multi-Level Variable Voltage Variable Frequency Power Supply
Optimization of PI Control Parameters for Shunt Active Power Filter Based on PSO
Two-Level Grid-Connected Discharge Inverter System of Power Battery Based on LLC
Simulation on Multi-Level Current Source SVG
Design of Current Lead for 50MVA HTS Transformer
Design and Magnetic Field Simulation of Giant Magnetostrictive Bone Conduction Pronunciation Vibrator
Chapter 10: Smart Grid and Microgrid Technologies
Micro-Grid Economic Operation Contains Electric Boiler
Research and Application on Visualization of Discrete Spatial Grid Resource Data
Micro-Grid Multi-Objective Optimizing Operation
Research on Dual-Mode Control Strategy of Energy Storage System in Microgrid
Research on Smart Grid Effects on the Intelligent Response Behaviors of Industrial Users
Smart Grid Control Technology of Multi Diesel Generator Set
Summary of Micro-Grid Control Technology
The Online Power Marketing Development Research under the Background of Smart Grid
Comprehensive Evaluation Index System and Method of Smart Distribution Grid
Model Research on the Whole Industry Chain Value Analysis of Strong and Smart Grid
The Analysis of Micro-Grid Investment Income for Different Operating Modes
Concept of URT Traction DC Microgrid and its Application Feasibility Study
System Modeling and Simulation of Intentionally Islanded Reconfigurable Microgrid
The Research on Commercial Modes of Smart Grid Value-Added Services Based on BSC Theory
The Research on Relay Protection Settings On-Line Verification System Application in Smart Grid
Multi-Objective Dispatch of a Microgrid with Battery Energy Storage System Based on Model Predictive Control
The Development about Multifunction Merging Unit Used in Smart Substation
The Improvement about the Reliability of Sampling Based on Process Bus in Smart Substation
Study on the Main Electrical Connection Optimization of Smart Substation Based on Coordination between Power Grid and Substation
Research on Clock Synchronization Scheme of Intelligent Substation Based on EPON Technology
The Research of Electronic Transformer Data Synchronization Method Based on Newton Interpolation
The Research and Application on Design Method for "Virtual Terminal" of Smart Substation
Chapter 10: Smart Grid and Microgrid Technologies
Application and Architecture of Power Dispatching & Distribution System Using Big Data Technology
The Research of the Distributed Grid Model Maintenance Technologies Based on Logical Unify
Chapter 11: Power Systems Management
A New Method of Power System Load Forecasting Based on Intelligent Optimization Algorithm
A Study on Factors and Causal Loop of Chinese Residential Electricity Price Policy
A Study on Key Factors and their Conduction Path of Chinese Rural Residential Electricity Price
A System Dynamic Simulation Model for Chinese Residential Electricity Price
Construction and Application of Coordination Scheduling System of Distributed Energy
Power Purchase Optimization Model Based on the External Cost of Power Generation
The Influence of Wind-Solar Hybrid Generation System on Transmission Service Rate
The Mechanism Design to Direct Power-Purchase Transaction Considering Market Supply and Demand
Application of Low Low Temperature ESP Technology in Thermal Power Plant
Fuzzy Comprehensive Evaluation of Trading Regulatory Risk for a Unified and Interconnected Electricity Market in China
Implementation Effect Evaluation of Tiered Electricity Pricing for Residents Based on Fuzzy Analytic Hierarchy Process
Load Clustering Based on SVC Algorithm
Potential Analysis of Demand Response Based on Peak and Valley Time Price
Research and Application of Static Security Check for Monthly Maintenance Schedule
Research on Surveillance Risk Index System of Unified and Interconnected Electricity Market in China
The Business Optimization Analysis of the Virtual Power Plant Based on the Large-Scale BESS System
Characteristic Analysis of the Electricity Price Fluctuation: An Empirical Analysis Based on California's Day-Ahead Market
Investigation the Possibility of Using SVD to Select the Direction Input the Operation Point into the Feasible Region
Research of Loss Reduction Efficiency Based on DEA
Analysis of Influence Factors of Power Consumption Fluctuations in the Process of China Urbanization
Research of Demand Response Strategy Simulation and Evaluation Based on Gridlab-d
Chapter 12: Electrotechnics, Low Voltage Electronics and Power Supply
Calculation of Electric Field under Overhead Lines with Complex Ground by Two Dimension Surface Charge Method
The Study of High Pressure Pulse Circuit in Ultrasonic Nondestructive Testing
Weighing System Design Based on Single Chip Microcomputer
Hardware Modification for Watt-Hour-Meter Field Calibrator to Reject Interference of Temperature
Implementation and Design of Voltage-Mode PWM Control CMOS Boost Power Converter with Protection Circuits
Small-Signal Equivalent Circuit Modeling and Controller Design of DC/DC Converter Based on Matlab
Chapter 13: New Energy Vehicles and Electric Vehicles
Optimization Control of Engine Working Points Adjustment for HEV Bus
Risk Evaluation of Charging Facilities of Electric Vehicles Based on Fuzzy Analytic Network Process
The Structure Design of a Small Electric Vehicle with Dual Functions of Climbing-Stairs and Driving over Roads
Using LLC Resonant Converter for Designing Electric Vehicle DC/DC Converter
Design of Magnetic Integrated Transformer for LLC Resonant Converter
Establishment and Research of Semi-Physical and Real-Time Simulation Platform for V2G Electric Vehicle Charging System
Research on Coordinated Charging Strategy for Electric Bus Battery Swapping Stations
Study on Charging Business Operation Model of Electric Vehicle
Economic Comparison of the Energy Saving and New Energy Vehicle - Taking China, US and Belgium as Examples
Analysis of Transformer Overload Problem with EV Charging Load
Distribution of Electric Field for EMU's Post Insulators Based on the Finite Element Method
Study on Multi-Objective Optimal Planning of Electric Vehicle Charging Stations with Alternative Sites
The Impact of Fast Charging for EVs on Distribution System
Design on Electric Power Wheel Control System
Braking Energy Recovery Research for Electric Vehicles
Chapter 14: Engineering Thermodynamics and Thermal Engineering in Designing of Energy Equipment
Applicability Research on Evaporative Cooling Technology in Hunan Province
Effects of Fuel Flow inside the Nozzle on Spray Characteristics of Butanol/Diesel Blends
Heat Exchanger Working Condition under Low Temperature and Simulation
Model for Leakage Fault Diagnosis of Pipe Network of Hot-Water District Heating
Study on Low-Carbon Catalytic Combustion Furnace of Natural Gas and the Application in Pottery Industry
Thermal Analysis and Design Applications of the Spiral Groove Tubes in Condensers
Application of Expert System PID Algorithm to Heat Exchange Station
Characteristic of Low Calorific Fuel Gas Combustion in a Pressurized Porous Burner
Characteristics of Heat and Mass Transfer in Condesation Process of Gas-Liquid Cross Flow
Discussions on the Methods of Preventing Heat Transfer Fluids from Oxidation in Open Heating System Based on Liquid-Phase Organic Heat Transfer Fluids Heater
Influence of Integrating Induced Fan and Pressurization Fan on Energy-Saving of 300 MW Coal-Fired Power Units
Numerical Investigation on Leading Edge of Film Cooling Blade with Different Turbulence and Blowing Ratios
Test Research on Natural Gas Engine's Thermal Balance
Energy Efficiency Measurement in Coal-Fired Power Plant Using DEA and PCA
Experimental Investigation of Temperature Difference Ratio of Trailing Edge Film Cooling Downstream of Pressure Side Split with Internal Spacer Arrays
Impacts of Ignition and Jet Timing on Natural Gas Engine Start Process
Numerical Simulation of Turbulence-Chemical Interaction Models on Combustible Particle MILD Combustion
Optimization of Centrifugal Fan Load Regulating in a Commercial CFB Boiler
Performance and Operation Analysis of a Quadra Sectors Rotary Airheater Adopted by CFB Boiler
Research and Develop on Series of Cryogenic Methanol Coil-Wound Heat Exchanger
Research and Develop on Series of LNG Coil-Wound Heat Exchanger
Thermoeconomic Optimization for a Ferroelectric Ericsson Refrigerator
Fuel Consumption Modeling for Medium Speed Marine Diesel Engine
Effects of Different Working Fluid by Using of Waste Heat Obtained from Coal-Fired Units in Organic Rankine Cycles
Heat Balance of Extinguishing Process of Flammable Liquid by Sprayed Water
Key Problem Analysis and Solution on Intake Water and Heat Transfer of Sewage-Source Heat Pump System
Laminar Heat Transfer Performances in a Tube with Center-Cleared Twisted Tape of Alternate Axes
Organic Rankine Cycle Simulation Based on Aspen Plus
Fluid-Structure Interaction of Ship Painting Workshop under Radiation Heat Transfer Condition
Research and Develop on Series of Cryogenic Liquid Nitrogen Coil-Wound Heat Exchanger
Chapter 15: Details and Units of Power Machines
A Quasi-Dimensional Model of Diesel Engine Working Process in Hardware-in-the-Loop Simulation System
Analysis and Research on the Influence Factors of the Spark Plug Ion Current in Spark Ignition Engine
Efficiency and Emissions of Spark Ignition Engine Using Hydrogen and Gasoline Mixtures
Study on the Effects of Coal Base Fuels on Diesel Engine Performance
Study on the Shutdown State of CNG Engine
Study on the Stress Distribution of the Piston Rod Fillet Based on the Nonlinear Finite Element Method
Discussion and Realization on Quality Control Methods of Power Steam Turbine-Generator Unit Installation
Multi-Field Coupling Modeling and Analysis for Cylinder Liner of Slow Speed Two Stroke Marine Diesel Engine
Wind Turbine Planetary Gearbox Fault Analysis Based on Bispectrum
Lift Limit of Horizontal Axis Wind Turbine
Research on a Welding Power Supply Based on Double PWM Power Feedforward
Study on Performance Promotion of Lift Type Wind Turbine
Numerical Simulation of the Unsteady Aerodynamic of Wind Turbine under Yaw Condition
Research of Wind Shear Dynamic Characteristics of Wind Wheels
Use of AE Testing Data for Condition Monitoring in Wind Turbine Gearbox
Modeling and Simulation of Ship Generator Sets
Feedback Particle Swarm Optimization for Shipboard Power System Restoration
Dynamic Response Analysis of Stop Log Gates in Power Station's Running Process
Spray Distribution of Plain Orifice Atomizer in Preheated Air Flow
Mathematical Model of Refueling Emission for Gasoline Vehicles and Influencing Factors Analysis
Model Research on Energy-Saving Potential of Engine Energy-Saving Technology
Main Oil Pipeline APCS with PWM-Controlled Valves and VFD Pump
Chapter 16: Fluids and Flow Engineering in Designing of Energy Machines
CFD Analysis of Impeller Internal Flow Field in Multistage Pump with Inducer
Feature Extraction of Vibration of Centrifugal Fan Based on LLE
Pulsation in Bag Breakup of Round Liquid Jets in Crossflow
An Appraisal of Turbulence Dissipation Rate Estimation Methods Using Large Eddy Simulation
A Study on the Effects of Blade Thickness on the Performance of Low Specific Speed Centrifugal Pump
Numercial Simulation of a Special Valve in Pneumatic Conveying Pipelines
Numerical Simulation of Flow Characteristics about Lateral Tooth Steam Seal
Study Method for Low Speed Flow Basic on Precondition
Vertical Mixed Jet Behavior of Orifice Nozzle
Development of Methods and Instruments of Measuring Liquid-Phase Heat Transfer Fluids' Viscosity
Chapter 17: HVAC, Air Conditioning and Refrigeration
Central Plant Control Optimization with a Thermal Chilled Water Energy Storage System: A Case Study in a High-Tech Building
Performance Prediction of Mechanical Draft Wet Cooling Tower Using Artificial Neural Network
Experimental Study on Effect of Meteorologic Parameters on Evaporative Cooling System Performance
Intelligent Fault Diagnosis System of Plate Heat Exchanger Based on GIS
Study on the Influence of Neighbour Room Heat Transfer on the Indoor Thermal Environment in a Heating Room
Application of the Self-Adjusting Fuzzy Control in Water System of Central Air-Conditioner for Saving Energy
Numerical Simulation of the Odor Spreading in a Factory
Numerical Simulation and Optimization of Air Distribution in Large Space
Chapter 18: Computer Applications and Mathematical Modeling
Research on PTN Networking Planning Technology
Research on the Time Synchronization Technology of Wireless Sensor Network
Research on Images Restoration Method under the Foggy Environment
Watershed Image Segmentation Based on PSO and FCM
A Fast Threat Assessment Model of Aerial Targets for Submarine
A Heuristic Reduction Algorithm Based on the Feature Weight
Entropy and Distance Measure of Intuitionistic Fuzzy Soft Sets
Moving Target Tracking Based on Trajectory Prediction
Multi-Relational Naive Bayesian Classification Based on the Selection of Relations
Parameter Estimation of Weibull Distribution Model Based on Ant Colony Algorithm
Vehicle Operating Fault Regularity and its Application in Inspection and Maintenance
The Fault Diagnosis Method of Support Vector Machine Based on Kernel Fuzzy C-Means Membership
Research on Conditioning and Application for the F2N2
Knowledge-Based Defect Prevention Research for Electric Power Information System
Typical Defects Sample Selection Methods Research for Electric Power Information System
「Nielsen BookData」 より
