Research in materials and manufacturing technologies IV : selected, peer reviewed papers from the 4th International Conference on Materials and Products Manufacturing Technology (ICMPMT 2014), September 18-19, 2014, Chongqing, China
著者
書誌事項
Research in materials and manufacturing technologies IV : selected, peer reviewed papers from the 4th International Conference on Materials and Products Manufacturing Technology (ICMPMT 2014), September 18-19, 2014, Chongqing, China
（Advanced materials research, v. 1061-1062）
Trans Tech Publications, c2015
- : [set]
- Part 1
- Part 2
大学図書館所蔵 件 / 全1件
-
該当する所蔵館はありません
- すべての絞り込み条件を解除する
注記
Includes bibliographical references and indexes
内容説明・目次
内容説明
Collection of selected, peer reviewed papers from the 4th International Conference on Materials and Products Manufacturing Technology (ICMPMT 2014), September 18-19, 2014, Chongqing, China.
The 248 papers are grouped as follows:
Chapter 1: Metals and Alloys;
Chapter 2: Composite Materials and Applications;
Chapter 3: Chemical Materials, Bio-Materials and Energy Materials;
Chapter 4: Building Materials and Construction Technology;
Chapter 5: Material Processing Technology;
Chapter 6: Materials Testing and Analysis, Materials Wear Resistance and Strength;
Chapter 7: Advanced Design and Advanced Manufacturing Technology;
Chapter 8: Dynamics;
Chapter 9: Vibration, Sound, Noise Analysis and Control;
Chapter 10: CAD / CAM / CAE and Applications; Chapter 11: Mechatronics, Industrial Robots, Automation and Control;
Chapter 12: Measurement Technology, Instruments and Sensors, Monitoring, Detection Technologies and Methodologies;
Chapter 13: Power, Electronics, Circuit Technology;
Chapter 14: Computer Applications and Mathematical Modeling, Numerical Methods, Intelligent Algorithms and Optimization;
Chapter 15: Communication Technologies, Image, Video, Data Processing;
Chapter 16: Industrial Engineering, Manufacturing Management, Production Quality
目次
Preface and Conference Organization
Chapter 1: Metals and Alloys
Damage Identification of Low Carbon Steel under Tensile Based on Elastic Modulus
Effect of Heat Treatment on Conductivity of Cu-1.0Cr-0.12Zr Alloy
Effect of the Solid-Solution Treatment on the Die-Casting Structures and Properties of Commercial RE-AZ91D Mg Alloy
Effects of Compound Treatment of Pulsed Magnetic Field and Mechanical Vibration on Solidified Structure of Mg97Y2Cu1 Alloy
Microstructure and Properties of Niobium Microalloyed Pipeline Steel in CSP and Steel Pipe Produced by ERW
Preparation of PMMA/PP/ PP-g-MAH Alloy
Study on the Precipitation Sequence of Aged NCu30-4-2-1 Alloy by DSC
The Application of Non-Linear Optimisation Algorithm to the Simulation of Nimonic Alloy 75 at Elevated Temperature
The Determination of Solution Temperature for NCu30-4-2-1 Alloy
Influence of Imidazoline Inhibitor on CO2 Corrosion of N80 Steel in Annulus Zone of Pump Recovery Well
Effect of Alternating Traveling Magnetic Field on the Removal of Inclusions from Aluminum Melt
Effect of Atmosphere Proportion and Nitriding Time on Plasma Nitriding of Duplex Stainless Steel
Discussion on the Mechanism of Fe-Cr-Mo Electrodeposition
Effect of Segregation Purification Process on Content of Impurity Elements in High Purity Aluminum
Chapter 2: Composite Materials and Applications
Effect of Mg Content on Phase Structure and Electrical Properties of (Ba0.97Ca0.03)(Ti0.96-xZr0.04Mgx)O3 Ceramics
Effects of Different Sintering Temperature on the Microstructure and Piezoelectric Properties of Pb(Nb2/3Zn1/3)x(Zr52Ti48)1-XO3 Ceramics
Fabrication of Pyrochlore Gd2Zr2O7 by High Temperature Solid State Reaction
Improved Curie Temperature of Li-Doped Lead-Free (K,Na)NbO3 Ceramics Analysis
Improvement of Thermal Conductivity of Silicone by Carbon Nanotube Array (CNTA)
In Situ Formation of Ti Matrix Composites Reinforced Nanometric TiC by Powder Metallurgy Technique
Microstructure and Reinforcing Mechanisms of Boron Carbide-Cerium Boride Porous Composites
Phase-Selective Synthesis of a Silicoaluminophosphate Molecular Sieve with 3-Aminopropyltriethoxysilane as the Silica Source
Preparation Cu-Doped Carbon Aerogels and their Adsorptive Desulfurization Performance
Preparation of B4C-CeB6 Porous Composites by Hot Pressed Sintering
Study on the Heat Shrinkable Property of Opaque COC/PETG Film
Syntactic Foam Prepared with Glass Hollow Spheres of Designed Size and Wall Thickness Ratio
Synthesis and Characterization of Ni-Doped Carbon Aerogels
The Effect of Compound Corrosion Inhibitor of Sodium Silicate in the Chlorine Dioxide Solution
The Effect of pH on the Fluorescence Properties of Thermally Stable CMC/Eu Complexes
Theoretical Analysis on Thermal Shock Resistance of Refractories
A Fundamental Study on Anchor Performance of CFRP Tendons with Compressed Anchor Sleeve
Analysis of Marine Fouling Microbial Communities Adhering to Carboxyl Modified MWCNTs-Filled PDMS Coating Surface during the Initial Stage of Biofouling
SAPO-34 Zeolites Prepared Using Calcined-MCM-41 as Silica Source
ZnO/SnO2/Montmorillonite Composite for Inhibition of Cyanobacterial Bloom
Improvement of Interfacial Adhesion in PP/PS Blends Enhanced with Polyethylene-Polyamine Surface Treated Carbon Fiber
Growth of GaN Film on Graphene by HVPE
The Transformation of ZnO Nanostructures Prepared by Thermal Evaporation
Transverse Magnetoelectric Effect in Nickel Zinc Ferrite-Lead Zirconate Titanate Layered Composites
Effect of Eu/Co Doping on the Resistive Switching Properties of BiFeO3 Thin Films
Preparation of One-Dimension Orthorhombic NaNbO3 Long Rods by Combining Hydrothermal Method with Post-Heat Treatment
A High-Performance Lightweight Over-Strength UHMWPE UD Cloth Preparation
Molecular Dynamics Study of Confined Fluid in Graphene Nanopores
Effects of Substrate Temperature on the Properties of Cu(In,Ga)Se2 Thin Films Prepared by Sputtering from a Quaternary Target
Effects of Indenter Tips of Quasi-Static Indentation Damage of Foam Sandwich Composites
Chapter 3: Chemical Materials, Bio-Materials and Energy Materials
Angelica keiskei Chalcone and its Effect on Microvessel Density and VEGF Expression of Mice Hepatocarcinoma Cells
Application Explores in Energy-Saving Materials of Water Supply and Sewerage Works
Comparison of Hot Corrosion Behaviors of Plasma-Sprayed Segmented Structure and Conventional YSZ Thermal Barrier Coatings under a Fused Na2SO4-V2O5 Salt Film
Effect of Beeswax, Palmitic Acid and Stearic Acid on Soybean Protein-Isolation/Carboxymethyl Cellulose Composite Films
Influence of Surface Properties and Pore Structure of High Surface Activated Carbon on Adsorption Capacity of Dibenzothiophene
Investigate into Variation Cashmere Fibers with Raman Spectra
Preparation and Characterization of Ag-Deposited Silica-Coated Fe3O4 Magnetic Nanoparticles with Recycling Antibacterial Properties
Preparation and Characterization of Amine-Modified Maleated Polypropylene
Research on Influence Factor of Scale in ASP Flooding
Research Status and Problem Analysis on Pineapple Leaf Crushing and Returning Technology
Study of Core-Shell Structure Poly(vinyl Acetate-Butyl Acrylate) Emulsion Particles Modification
Study of New Ultra-Temperature Polymer Fracturing Fluid Material
Study on Hydrophilic Modification of Acrylic Yarn
Synthesis and Optical Properties of D-A Type Organic Molecules Based on Fluorene and Carbazole
Synthesis and Optical Properties of Donor-Accepter Organic Conjugated Molecules Composed of Fluorene and Phenothiazine
Synthesis and Spectral Analysis of Benzene-d6
Synthesis of D-A Type Organic Molecules Based on Carbazole and Phenothiazine for Organic Light-Emitting Materials
The Band Structures of Chemisorptions on Si (100) Surface
The Density of States for Chemisorptions on Si (111) Surface
Application of PCA Method to Characterize Strawberry
Preparation of Cerium Hydroxide by Green Synthesis and Characterization
Preparation, Characterization and UV Absorption of Phosphotungstic Acid Cerium
Resistive Switching Behavior in Pt/La0.7Sr0.3MnO3/Nb0.05Bi0.95FeO3/Nb:SrTiO3 Ferroelectric Heterostructure
Chemical Kinetic Studies on Polyurethane Formation of GAP and HTPB with IPDI by Using In Situ FT-IR Spectroscopy
Determination of Experimental Conditions of Preparation of Zeolites from Fly Ashes via Alkaline Fusion Followed by Hydrothermal Crystallization
Raising Lipid Content Improve Moisture Barrier of Soybean Protein-Isolation/Carboxymethyl Cellulose Composite Films
Research on Reducing the Degree of COD in Wastewater during Sizing Technology
Optimized Preparation of Capsaicin-Loaded Nanoparticles Gel by Box-Behnken Design
Chapter 4: Building Materials and Construction Technology
Compressive Behavior of Steel Plate-Concrete Structures Using Cementless Concrete
Flexural Behavior of Basalt Fiber Reinforced Ferrocement Composite with Fly Ash
Investigation on Properties and Flow Degree of Rubberized Mortar under Dynamic Load in Metro
Research on Large Partical Size and Porous Rubber Modified Asphalt Mixture Repairing Techniques Used in "White and Black" Pavement
Strength Quality Research of Concrete Blended with Solar PV Cells
The Application of Paper Material in Transition Building after an Earthquake
Study on the Stone Material of the Chinese Official Buildings in Early Ming Dynasty (about 1368-1424)
The Flexural Behavior of Bolted Steel-Concrete Composite Beam
Uniaxial Compression Creep Prediction of Asphalt Mixture Using the Eshelby Equivalent Inclusion Method
Chapter 5: Material Processing Technology
A Review of Numerical Models for Twin-Roll Casting
A Study Effect of Shooting 2 Balls in a Ball Swaging Process on Gram Load Parameter Using Finite Element Analysis
A Way to Reduce Machine Cutting Temperature
Case Analysis on PTH Fracture Caused by Twin Copper
Cyclic Oxidation Resistance of Hot-Dipping Aluminized GH169
Design of Welded Pipe Forming Machine Based on Siemens S7-400
Discovery of -Fe2O3 in the Oxide Film on ELID Grinding Wheel
Effect of Chamfer Angle on the Stress Distribution in Weld-Boded Single Lap Aluminum Joint
Failure Analysis and Study on Heat Treatment Process of Grate Bars Used in Sintering Trolley
Manufacturing Process of EP Matrix Composite Rapid Injection Mold and Application Case
Moldflow-Based Optimization Design of Gating System in Injection Mold for Automobile Bumper
Numerical Analysis of Multi-Layer on the Stress Distribution in Adhesively Bonded Single Lap Aluminum Joint
Numerical Simulation of Tube-Plate Welding Structure with T-Shaped Sections
Prediction of GMA Welding Characteristic Parameter by Artificial Neural Network System
Recovery of Ti-6Al-4V Alloy Scrap by Hydrogenation and Hydride Sintering
Research on Helical Milling Specialized Tool Based on Chip-Splitting Mechanism
The Influence of Technology Head Shift Speed, Abrasive Kind and Granularity on Technology Head Vibration during Hard-to-Machine Material Cutting
Water Jet Technology Head Vibration due to Water Pressure Change
Finite Element Analysis of Thin Strip Profile in Asymmetric Cold Rolling Considering Work Roll Crossing and Shifting
Finite Element Modeling of Quenching Process Coupled with Phase Transformation Effect
Microstructure of Laser In Situ Synthesized TiBx+TiC Reinforced Composite Coatings
The Expansion Forming Parameters of the Expandable Tubular Material
The Mechanic Properties of Thermoplastic Polyurethanes Elastomer Foam Molded Using Supercritical Fluid
Wear and Morphology Investigation of Cr/WC-Ni Based Composite Coating by Laser Cladding
Experimental Study on Orbital Drilling Force and Machining Quality of CFRP
The Technology Head Characteristic Frequency Reading and Research on Technology and Material Parametres Influence on AWJ Technology Manufacturing Systems Technology Head Reverberance
The Analysis of the Temperature Field of EDM Surface Strengthening Titanium with Mist Medium
Chapter 6: Materials Testing and Analysis, Materials Wear Resistance and Strength
Effect of AC Magnetic Field on Solidified Structure and Mechanical Properties of Mg97Y2Cu1 Alloy
Effect of Aging Process on Microstructure and Room Temperature Ductility of TB6 Titanium Alloy
The Application of Fractal Theory in EDM Surface Strengthening TC4 Titanium Alloy
Cell Growth Morphology on Nano-Structured Surface Based on Wetting
Energy Concept of Hardness by the Kinetic Sphere Indentation
Finite Element Analysis of a Steel Bracket
Mechanical Property Analysis of the Boom Considering Large Deformation Effect
Plasma Gear Manufacturing Thermal Aspects
Research on Improving Durability of the Motorcycle Brake Drum
Simulation on Wear-Resisting of Biomimetic Brake Disc/Pad Coupling System
Simulation of Rock Fractures by Monte Carlo Method
Study on the Magnetic Property Deterioration of Amorphous Cores
The Influence of Coating Thickness on the Relative Area of Tribounits Contact
The Storage Length Evaluation of Rubber Sealing Components with Accelerated Thermal Ageing Tests
Wear Modeling of Steel Surfaces to the Flow under Pressure of Melts Polymers with SGF
Analysis of New Heat Exchanger Performance in Phase Change Energy Storage
Effect of Composition on the Tribological Behaviors of Ceramic-Matrix Friction Materials
Stress Distribution Behavior of Spherical Plain Bearing Fabricated by TiAl-Based Composite Materials Based on the Finite Element Analysis
Numerical Calculation and Analysis of Water-Lubricated Stern Bearing Considering Elastic Hydrodynamic
Novel Multi-Stream Plate Exchanger under High Pressure-Structure and its Design Method
Researches on Lifetime Modeling of LED Luminaires
Fire Hazard Research of Wire Joint
Investigation on Microstructure and Wear Resistance of the New CrWMoV High-Alloy Wear Resistant Cast Iron
Wear Behavior and Microstructural Evolution during Dry Sliding Wear of AZ51 Magnesium Alloy
Chapter 7: Advanced Design and Advanced Manufacturing Technology
A Graphical Symbol for Machining Process Information Description Using Model-Based Definition Technology
Design and Experimental Analysis of Pepper Fruit Preprocessing Machine
Design on a Removable Catalyst Muffler
Multi-Dimensional Assembly Process Data Management Method Based on Workflow
Research on System Architecture and Fine-Grained Access Control Strategy of Collaborative Development Platform
Parallel Machine Scheduling Problem with a Resumable Availability Constraint
Study on the Design Factors Affecting the Operating Actions that Can Be Used Easily at the Design Stage
The Design of Electrical Equipment Fault Diagnosis System Based on Fuzzy Inference
The Research of BDAR under Conditions of Informationalization
Influence of Running Shoes Made of Different Materials on Athletes' Sprint Speed
A Cooling Vest for Construction Workers
Chapter 8: Dynamics
An Adjustable Inertia Balance Support for High-Speed Scanning Probe Microscope
Study on Dynamic Characteristics of the Bridge Crane Hoisting Mechanism Based on State-Space Method
The Vibration Model Establishment and Solution of Bending-Torsion-Axial-Swing Coupled the Helical Gear Transmission System Based on Lumped Parameter Approximation Method
The Mechanical Properties Comparative Analysis for Socked and Non-Socketed Composite Pile
Mathematical Simulation of Concrete Fatigue Strength under Cyclic Loading
The Study on Contact Angle of High-Speed Ball Screw
Chapter 9: Vibration, Sound, Noise Analysis and Control
Dynamic Response Analysis of Submarine Pipeline under Action of Current
Dynamics Analysis and Parameter Optimization of New Vibration Platform
Optimization of Sound Source Model for the Simulation of High Speed Train Interior Noise Using Finite Element Method
The Simulation and Accuracy Analysis of Sound Filed Reconstruction Based on Fourier Transform-Source Simulation Technique
Vibration Test and Analysis of No-Tillage Planter on the Maize Stubble Surface
Vibration Analysis Based on the Mathematical Model of the Air-Suction Device Tillage Seeder Seeding
Experimental Research on Thermal-Vibration for Composite Trilaminated Wing Structure
Chapter 10: CAD / CAM / CAE and Applications
Dynamic Responses Analysis of Permeable Breakwater Subjected to Random Waves
Flow Field Analysis and Simulation of Tank Cars Based on Secondary Development of FLUENT
Integrated Thermal-Structural Analysis of a Reflecting Optical System with All Metal Components
Research and Development of Rapid Design System for Modular Machine Tool Based on KBE
Research on the Calculation of the Security of High Concrete Arch Dam Based on the Finite Element Method
The Finite Element Modeling and Structure Analysis of Dust Removal Fan
Turbine Blade CNC Machining Simulation Analysis Based on MATLAB and UG
Characteristic Performance Analysis of Traction Motor on EMU with Broken Bars Using FEM
The Discussion of the Simulation Accuracy of the Vehicle Suspension Coupled Dynamics Model
Parameterized Highway Tunnel Inner Contour Design with ObjectARX
The Small Road Surface Shot Blasting Cleaning Machine Design
Decreasing Airflow Velocity in High Speed Hard Disk Drive by Using Spoiler
Deformation of Hard Disk Drive Media Caused by Thermal Stress and Induced Air Flow
Simulation and Numerical Analysis of Nondestructive Testing on Weld Cracks by Eddy Current Thermography
Finite Element Analysis of Anchor Impacting the Buried SOFC
Chapter 11: Mechatronics, Industrial Robots, Automation and Control Technologies
2-DOF Synchronous Control of 6PUS-UPU Parallel Manipulator
Asymptotic Properties of Sampling Zero Dynamics for Nonlinear Systems in the Case of Time Delay and Relative Degree Two
PID Control of a Parallel Vibration Isolation System Based on Pneumatic Artificial Muscle
Study on Adaptive Fuzzy Control System of Settlement Technology
Study on the Design of the Ventilation of Ship Engine Room Control System
The Design of the Test Control System of Small Piston Aircraft Engine
A Semantic Gateway for Home Automation Networks
Analysis and Control of the Fault in the Hydraulic System of Coal-Machinery
Quasi-Close Loop Control of NC Machine Tools
Research Situation of Deicing Device of Transmission Line Deicing Robot
Study on Prediction of Chaotic Time Series Using Least Squares Support Vector Machines
Manipulator Tactile Telepresence Research Based on one Type Pressure-Sensitive Sensor
Chapter 12: Measurement Technology, Instruments and Sensors, Monitoring, Detection Technologies and Methodologies
Design of Multi Parameter Water Quality Online Monitoring System Base on FPGA
Expert System Based on Fuzzy Rules for Monitoring and Diagnosis of Operation Conditions in Rotating Machines
Properties of Films Characterized by Scanning Acoustic Microscope
Research on the Secondary Compensation Method of the Screw Pitch Error Based on the Laser Interferometer
Study on Calibration and Test of Automotive Wheel Hub Detection System
A Skywave OTHR Adaptive Frequency Selection Method Based on Preliminary Criterion and Weighted Criterion
A Water-Solution Fluorescence Probe for H2O2 Based on Naphthalimide Derivative
Method and Apparatus for Measuring the Strength of Weak Binding Coating Interface
Moisture Resistance of the As-S-I Glasses
Study on the Influence of the Waveguide Layer to the Far Field of GaN Based Laser Diode
The Development of Initial Position End-of-Line Test System for PMSM
Study and Application of Machine Vision Technique for Quality Detection of Agricultural Products
Determination of the Whole Stiffness of Paper Plate
Calibration Methods of Silicate Analyzer
Chapter 13: Power, Electronics, Circuit Technology
Analysis of Operation of AVC System in Fuzhou Power Grid
Analysis of the Influence of High-Speed Railway on Power Quality
The Study of Characteristic Impedance of Conductive Transmission Line in FPC(Flexible Printed Circuit Board) Design and Process
Fault Diagnosis of Traction Inverter Based on Wavelet Analysis and Neural Network
Optimized Design of Double-Loops Controller for Single-Phase Pulse Rectifier without LC Resonant Filter Circuit
Simulation of Distributed Photovoltaic Power Connecting to Grid Based on ETAP
The Design of Semiconductor Laser Driver and Simulation Analysis of Constant Current Drive Circuit Based on Multisim 10
Chapter 14: Computer Applications and Mathematical Modeling, Numerical Methods, Intelligent Algorithms and Optimization
A Higher-Dimensional Lie Algebra and 4x4 Discrete Soliton Hierarchy with Self-Consistent Sources
A New 3x3 Discrete Soliton Hierarchy with Self-Consistent Sources
A New Coupled Map Car-Following Model Considering the Synergy Effect of Ahead-Backward Vehicles
Construction of Compactly Supported Nonseparable Orthogonal Wavelet with Dilation 4
Power Reduction Techniques in Cloud Data Centers
Research and Development of Components Technology Selection Database Based on the Network
Research on the Frame System of Digital Library Mobile Cloud Service Platform
Study on Connectedness of Flexible Housing as an Application of Space Syntax
Sybil Node Discovery Based on Group Location Information
The Research on the Axis-Symmetric Development and Verification for the Positive Scheme Numerical Method
The Upper Bound of Primitive Exponent of a Class of Special Nonnegative Matrix Pairs
Ubiquitous Library Service System Architecture Research Based on Cloud Computing
Optimization of Multi-Depot Heterogeneous Incident Vehicle Routing Problem with Soft Time Windows Based on an Improved Ant Colony Optimization
Watermarking Scheme Resilient to Geometrical Attacks Base Normalized Feature Area
A Study on Static Water Resistance Prediction of Offshore Wind Turbine Installation Vessel
Contrastive Analysis on Parameter Identification of Unmanned Gliding-Hydrofoil Craft's Maneuverability Based on GA and PSO
Grillage Structural Optimization Based on Genetic Algorithm and Mechanical Direct Calculation
Numerical Study of the Influence of Ambient Pressure on the Inerting Effect of an Aircraft Fuel Tank Inerting System
Quantitative Models for Complex Physical Systems
Research on Triangularization of Parametric Surface Based on Surface Curvature
A Comparative Study on Single Display and Region-Based P300 Speller Paradigms for Brain-Computer Interface
Calculation of Elliptic Sphere Form Error Using a Differential Geometry Algorithm
Study on Mathematical Model of Cylindricality Error
Grey Relational Analysis and its C# Program in Analysis of Rigid Polyurethane Foam
Chapter 15: Communication Technologies, Image, Video, Data Processing Technologies
A Scalability and Reliability Super Peer Construction Method in Unstructured Distributed System
Target Recognition and Tracking Algorithm without Training Samples: Sand-Table Algorithm
The Design of Real-Time and High-Speed Video Processing Platform for Aerial UAV Based on DM642
Passive Wireless Communication Technology Applied in Green Building
Hadamard Transform Combined with PTS for PAPR Reduction in Direct-Detection Optical OFDM System
Chapter 16: Industrial Engineering, Manufacturing Management, Production Quality
A Prescriptive Approach to Assign Weights to Customer Needs for System Design
A Sensitivity Analysis of Train Speed and its Effect on Railway Capacity
Batch Picking Method for Bookstore Distribution Center
Modern Technology Equipment Maintenance Process Management
The Selection Method of Parts in Product Family Evolution
A Study on Approch Method of the Manufaturing Informatization for Semi-Companies
Proposed Method for Sustainability Development of Consumable Goods
Thoughts on Product Development Oriented to Sustainability in Organizational Overview
Study on Factors Effecting Wayfinding and its Impact on Hospitals
Maintenance of Hot Processing Apparatus in Steel Industries: Effects on Production Output
Alarm Rationalization Based on Process Mining Techniques
Contemporary Lean Technology and Process Management Theory and System
The Optimization and Countermeasures Research of Agricultural Products Quality and Safety Supervision Mode
Data Operation of Management Accounting in E-Commerce Enterprises
Enterprise Document Management Module's Design and Implementation Based on Workflow Technology
「Nielsen BookData」 より
