Chemical, material and metallurgical engineering IV : selected, peer reviewed papers from the 2014 4th International Conference on Chemical, Material and Metallurgical Engineering (ICCMME 2014), December 30-31, 2014, Shenzhen, China
著者
書誌事項
Chemical, material and metallurgical engineering IV : selected, peer reviewed papers from the 2014 4th International Conference on Chemical, Material and Metallurgical Engineering (ICCMME 2014), December 30-31, 2014, Shenzhen, China
（Advanced materials research, v. 1094）
Trans Tech Publications, c2015
- : pbk
大学図書館所蔵 件 / 全1件
-
該当する所蔵館はありません
- すべての絞り込み条件を解除する
注記
Includes bibliographical references and indexes
内容説明・目次
内容説明
International Conference on Chemical, Material and Metallurgical Engineering (ICCMME 2014), December 30-31, 2014, Shenzhen, China.
The 101 papers are grouped as follows:
Chapter 1: Chemical Materials and Technologies;
Chapter 2: Chemical Technologies in Energy;
Chapter 3: Properties and Performance of Materials;
Chapter 4: Semiconductors and Other Materials and Technologies for Solar Cells, Power Sources and Electronics;
Chapter 5: Preparation, Properties and Performance of Building Materials;
Chapter 6: Properties and Performance of ast Iron, Steels and Alloys;
Chapter 7: Developing and Researching of Technologies of Material Processing;
Chapter 8: Technologies in Mining and Mineral Processing;
Chapter 9: Material Strength and Structural Design
目次
Preface and Conference Organization
Chapter 1: Chemical Materials and Technologies
A Concise Approach for the Synthesis of 4-Nitrophenyl- -D-ribofuranoside
A Facile and Effective Route to the Synthesis of Sulfonyl Azides
An Application of Electron Beam Irradiation for Improving the Peptide Antioxidant Activity and Changing the Microcosmic Surface Morphology
Catalytic Hydrolysis of Hydrogen Cyanide on Cu-Al Catalyst
Selective Formation of Herbicides by Selenium-Catalyzed Oxidative-Reductive Carbonylation of CO
Preparation of Skin Care Lotion with the Substrate of Insect Wax and Camellia Oil
Study of the Catalytic Activity of Acidic Ionic Liquid in the Synthesis of Methyl Oleate
Synthesis and Characterization of a Cascaded Chromogenic Enzyme Substrate
Synthesis and Characterization of a Dumbbell-Shaped Polyrotaxane Based on Polytetrahydrofuran bis(3-aminopropyl) Terminated and -Cyclodextrins Using Polyamidoamine (PAMAM) Dentrimers as Bulky Stoppers
Synthesis of an Isomeric Nucleoside Enantiomers of 1,3-bis(1'-deoxy- -ribofuranose-2'-yl)-thymine
Synthesis of Carbohydrate-Conjugated Flavone Derivatives
The Improved Process for the Preparation of Iloperidone
Preparation of Sulfur-Free Exfoliated Graphite in the Graphite-HClO4-CH3COOH Systerms
Preparation of Chitosan Nanospheres by Miniemulsion Crosslinking Method
Kelvin Probe Force Microscopy Study of the Photogeneration of Surface Charges in Polymer Photovoltaic Film
Gold Catalysts on TiO2-Modified Silica Gel for the Selective Cyclopentane Oxidation to Cyclopentanone
Study on Preparation of Carbonaceous Pelletizing in Industrial Silicon Production
Preparation and Visible-Light Catalytic Activities of Fe-TiO2 Loaded on Activated Carbon Fiber Felts
Effect of Grafting Conditions on NR-s-g-HFMA Copolymer and its Thermal Stability
Polypropylene/Wood Flour Composites Prepared by Solid State Shear Milling
Preparation and Crystallization of Modifed Talc/Poly(L-Lactic Acid) Composites
Preparation and Properties of Wood Flour/HDPE Microcellular Foamed Composites
Preparation of WPU Wet-Rubbing Fastness Improver
Progress on Preparation and Application of Calcium Carbonate Whisker
The Tween-60-Assisted Preparation of Pd/C Catalyst and its Application in Suzuki Coupling Reactions
Application of Atomic Force Microscopy Characterization Technology in MgAl-CO32--LDH Exfoliation Behavior
The Effect of Different Colloidal Silica Binders on Strengths of Corundum-Mullite Castables
Chapter 2: Chemical Technologies in Energy
Heat Treatment of the Hesigewula Lignite and Moisture Adsorption Experiment of its Solid Products
In Situ Growing of Co2+ Doped TiO2 Film on the Surface of Ti Plate and its Photo-Catalytic Hydrogen Production
New Energy Development and Energy Chemical Engineering (Topic Field) Released of Alkali Species under High Pressure Gasification of Pakistani Coal
Properties of LaNi4.3Al0.7 Applied in Separating Hydrogen from Coke Oven Gas
Pyrolysis of Hesigewula Lignite and Identification of Aromatics in the Pyrolysis Tar by Gas Chromatography-Mass Spectrometry
Synthesis, Structure and Electrical Properties of Pr-Doped Apatite-Type Lanthanum Silicates
Chapter 3: Properties and Performance of Materials
Study on Acoustic Emission Signal Frequency Analysis for Diamond Growth Process
Towards an Atomic-Scale Understanding of the Adsorbate-Driven Formation of High-Index Faces
Study on the High-Speed Analysis of Coal Qualities by FT-NIR Method Based on Improved Successive Projections Algorithm
Determination of the Interface Roughness between Ni-Coated Layer and Cu Substrate by Glow Discharge Optical Emission Spectroscopy Depth Profiling
Orientation Evolution in the {0001}-Oriented Hexagonal Crystal during Channel Die Compression
Deposition Model of Sodium (Potassium) Fluorosilicate Fouling in Wet - Process Phosphoric Acid Production
Chapter 4: Semiconductors and other Materials and Technologies for Solar Cells, Power Sources and Electronics
The Solar Cell Research of Particles Irradiation and Damage Effect
Effects of PTFE and PEDOT:PSS Double Buffer Layers on Flexible Polymer Solar Cells
Improving Safe Properties of Pp13TFSI Based Electrolyte for High-Voltage Graphite/Li[Li0.2Mn0.54Ni0.13Co0.13]O2 Battery
Optically-Enhanced Polymer Bulk Heterojunction Solar Cells by Addition of Gold Nanostructures
Structures and Optical Properties of Sm-Doped CuInTe2 Semiconductor
Synthesis of Three Dimensional Graphene/Multiwalled Carbon Nanotubes Nanocomposites Hydrogel and Investigation of their Electrochemical Properties as Electrodes of Supercapacitors
The Effect of Ge on the Electrochemical Performance of Sn/C Nanocomposite Anode Materials for Lithium Ion Batteries
The Effect of N Doping Amount on Zn/N-Codoped Composite Films by Vacuum Deposition
Synthesis and Optical Properties of Strontium Aluminate with Industrial Sodium Aluminate Solution
Chapter 5: Preparation, Properties and Performance of Building Materials
Experimental Study on Seismic Performance of Circular Steel Self-Compacting Concrete Elements
Moisture Damage Range in Gradation of Asphalt Mixture ATB-25
Research on Microstructure and Low Temperature Properties of Polymer Modified Asphalt
Research on Ultrasonic-Rebound-Strength Curve of Polypropylene Fiber Concrete in Chloride Environment
Sodium Sulfate Corrosion of Polypropylene Concrete Strength Curve of Impact Study
Influence of Modified Organosilicon Waterproofing Agent on Durability of Concrete
Micro-Analysis of Sulfate Salt Attack Destruction on Autoclaved-Curing Concrete
Discussion on Formula for the Flexural Capacity of Concrete Beams Strengthened with FRP
Chapter 6: Properties and Performance of ast Iron, Steels and Alloys
The Effect of Milling Parameters and Nickel Content on Ni-Al-TiO2-B2O3 System during Mechanical Alloying
Research on Corrosive Wear Properties of Super High Chromium Cast Iron
Effect of Yttrium Addition on Cyclic Oxidation Behavior of Co-10Cr-10Al Alloys at 1073K
Microstructural Evolution of Cr-Ta Powder in the Process of Mechanical Alloying
Jointing of Zirconia Ceramic and Titanium Alloy
Effect of V, Ti, and Ce on Structure and Performance of NM400
Equivalent Circuit for EIS Study on Rusted Marine Cast Iron Artifacts
High Current Pulsed Electron Beam Effect on Micro-Arc Oxidation Film of Ti Alloy
Effect of Al2O3 and CaF2 on Melting Temperature of High Calcium Ladle Desulfurization Slag
Chapter 7: Developing and Researching of Technologies of Material Processing
Temperature Field Simulation of Electron Beam Cladding W Coating on Cu Substrate
A New High Precise Powder Feeder for Fabricating Functionally Gradient Metal Component
Experimental Study on Ultrasonic Shot Peening Forming and Surface Properties of AALY12
Study on New Extrusion Route of Equal Channel Angular Processing in High Purity Aluminium
Study on Surface Processing of Non-Rotational Symmetry
Study on the Modification of Blast Furnace Smelt Slag and Crystallization Behavior in the Solidification Process
The Causes Analysis for the Surface Wrinkle Defects of Cold-Rolled Strip and the Control Measures
The Present Situation and Developing Trends of Hot Closed-Die Forging
The Analysis of Process Information Characteristics for Wire-Sheet Spot Welding
The Effect of Dry Granulating Machine Spindle Eccentricity on the Granulation
Chapter 8: Technologies in Mining and Mineral Processing
Experimental Study of a Lead-Zinc Sulfide Comprehensive Recovery
Gas Seepage Law in Condition of Bound Water of Low Permeability and Tight Sandstone Gas Reservoir
Investigation on Copper Flotation from a Complex Copper Ore, Yunnan Province
Leaching Experiment Study on Silver Ore in Yunnan Province
Research on Exploration of Mineral Processing for a Iron Ore
Research Progress of Adsorption Capacity-Enhancing Modified Natural Manganese Mineral
Study on Abutment Pressure Distribution Law of Fully-Mechanized Sublevel Caving Face in Extra-Thickness
Study on Numerical Simulation of Fully Mechanized Top Coal's Caving Property of Tang Gong Ta Coal Mine
Study on the Pretreatment Leaching of a Micro-Disseminated Gold Ore Deposited in Yunnan
The Application of BOP During Oil Well Drilling
The Research of Geochemical Characteristics and Indicative Significance for the Source Springs - A Case of Huanglong Valley in Sichuan Province
The Study of Top Slag Reforming in the RH Refining Process
The Technology Limits for Stratified Injection of Polymer Flooding
Using Microorganisms to Facilitate Phytoremediation in Mine Tailings with Multi Heavy Metals
Efficient Application of Automation Technology in Thickener Process
High-Efficiency Cut Blasting with Shell Radial Shaped Charge in Laboratory-Scale Blasting
Chapter 9: Material Strength and Structural Design
Comparison of Affecting Factors on the Shear Stress Output of Cylinder-Typed MRF Clutch
An Exact Analytical Solution for Star-Shaped Cracks
Frame Strength and Stiffness Analysis Based on ANSYS
Spray Car Workbench Racks of Modal Analysis
Strength Analysis and Construction Optimization of Cab of Smart Sprayer
Computer Simulation on the Dynamic Buckling of Initial-Defect Plates under Axial Step Load
Research on Vibration Stress Relief for Cured SU-8 Photoresist Layer
Dynamic Response of the Pipe Conveying Fluid with the Pressure Pulsation
The Computer Simulation of the Dynamic Buckling of Cyclindrical Shells under Pulse Load
Numerical Simulation of Lamb Wave Propagation in Isotropic Materials with Different Plate Thicknesses
「Nielsen BookData」 より
