Advances in materials and materials processing V : selected, peer reviewed papers from the 2014 5th International Conference on Advances in Materials and Manufacturing (ICAMMP 2014), December 20-21, 2014, Fuzhou, China
著者
書誌事項
Advances in materials and materials processing V : selected, peer reviewed papers from the 2014 5th International Conference on Advances in Materials and Manufacturing (ICAMMP 2014), December 20-21, 2014, Fuzhou, China
（Advanced materials research, v. 1095）
Trans Tech Publications, c2015
- : pbk
大学図書館所蔵 全1件
注記
Includes bibliographical references and indexes
内容説明・目次
内容説明
Collection of selected, peer reviewed papers from the 2014 5th International Conference on Advances in Materials and Manufacturing (ICAMMP 2014), December 20-21, 2014,Fuzhou, China.
The 192 papers are grouped as follows:
Chapter 1: Composites;
Chapter 2: Low-dimensional and Nano-Materials;
Chapter 3: Metal-based Materials and Alloys;
Chapter 4: Building and Construction Materials;
Chapter 5: Biomaterials and Technologies;
Chapter 6: Chemical Materials and Technologies;
Chapter 7: Material Testing, Characterization and Applications;
Chapter 8: Surface Engineering and Coating Technology;
Chapter 9: Materials Processing Technology and Applied Research
目次
Preface and Committee
Chapter 1: Composites
Analysis of the Geometry and Microcracks of Kevlar/Epoxy Composites
Effect of Diamond Shape on Surface Roughness of Diamond/Cu Composites
Effect of Diamond Shape on Thermal-Physical Properties of Diamond/Cu Composites
Effects of Sintering Temperature on Microstructure and Wear Properties of Al2O3 Particle Reinforced Al Composites
Preparation of Nickel-Based Al2O3-TiB2 Composite Ceramic Powder
The Influence of Sintering Temperature and Whisker Content on the Flexural Strength of Aluminum Borate Whisker Reinforced Aluminum Phosphate Composite Materials
The Study of Composite Material of Al-C System
Chapter 2: Low-Dimensional and Nano-Materials
Atomistic Simulation on Buckling Behavior of Monolayer Graphene
Modeling and Simulation for Current-Illumination Characteristics of Carbon Nanotube
Preparation and Thermal Fatigue Behaviors of Silicon Nitride Nano-Ceramics
Study on Dispersion and Rheology of Particles in Water-Based Nano TiN Fluid
Transmission Performance of Water-Based Nano Fluid Based on Computational Fluid Dynamics
-Cyclodextrin Modified Hybrid Magnetic Nanoparticles as an Adsorbent for Phenol Removal
The Preparation of ZrO2 and the Influence of the Calcination Temperature
The Synthesis of Single-Crystal BiOI Nanoplates with {001} Facets Exposed
Chapter 3: Metal-Based Materials and Alloys
A Study on Mechanical and Fatigue Properties of a Stainless Steel
Development of 590MPa Grade Hot-Dip Galvannealed DP Steels
Effect of Annealing Temperature on Microstructure and Damping Capacity of Twin Roll Cast ZK60 Alloy
Effect of Ca and Nd Alloying on the Microstructure of Mg-6Al-Ca-Nd Alloy
Effect of Cu on the Electrochemical Corrosion Behavior of Sn-8Zn-3Bi Lead-Free Solder Alloy
Effect of Electropulsing Rolling on the Microstructure and Properties of Industrial Pure Titanium TA1
Effect of Er on Microstructure and Hardness of Al-Zn-In Alloy
Effect of Grain Size on Microstructure and Orientation of Fe-25Mn-3Si-3Al Steel
Effect of Nd on Primary Silicon and Mechanical Properties of Hypereutectic Al-17.5%Si Alloy
Experiment and Analyses on 16 Mn Steel under Cyclic Loading Controlled by Strain
Experimental Study on the Effect of Retained Austenite on the Impact Toughness of a Low-Carbon Martensite Steel
Galvanic Corrosion of 70-30 Copper-Nickel Alloy in Contact with Nickel-Aluminum Bronze in Simulated Deep Sea Environment
High Temperature Oxidation Investigation of Hot Roll Material with High-Speed Steel
Influence of Neodymium on Wear Resistance of Hypereutectic Al-Si Alloy
Influence of Pre-Deformation Strain on Recovery Performance of Ni47Ti44Nb9 Alloy 8mm Pipe Joint
Influence of Solution Treatment on the Microstructure and Mechanical Properties of an Deformed Al-12.7Si-0.7Mg Alloy
Investigation on the Property of High Si-Al Alloy Prepared with Ultrasonic Vibration Aided Casting Technology
Isothermal Crystallization Behavior of Cu42Zr42Al8Ag8 BMG Investigated with Electrical Resistance Measurement
Liquid-Phase Separation of Undercooled Fe-Cu-Si Alloy
Manufacturing Technology Research of Magnesium Alloy Transmission Case
Measurement of TTP Curves of 7050 Aluminum Alloy by Conductivity
Micromechanics Analysis of Elastic Modulus of Alumina-Carbon Refractories
Modification of Hypereutectic Al-20%Si Alloy by Neodymium
Research on Heat Resistance of As-Cast Ferritic Nodular Iron
Study on High-Temperature Mechanical Properties of SPHC Steel Produced by CSP Technology
Study on Microstructure and Property of High Boron Alloyed Stainless Steel Composite Plate Containing Titanium
Study on Multi-Alloy Ingots Produced Using Hot-Top DC Casting Approach
Test and Research on Ratchet Effect of 16 Mn Steel under Cyclic Loading
The Feature of Slag from Complex Hot Metal Blown by Converter Processing and its Influence on the Craft
The Phase Structures and Properties of Pt-Ir-M (M=Zr, Mo, Y) System
Determination of Al, Cu, Ni in Zr-Based Amorphous Alloy by Inductively Coupled Plasma Atomic Emission Spectrometry
Ti-Al-Zr-B-Y Amorphous Alloy Powders Prepared by Mechanical Alloying
Chapter 4: Building and Construction Materials
Comparison and Analysis of RC Beams Strengthened with FRP Bonded on the Side and Bottom Surface
Effect of Basalt Fibers on Rheological Property of Asphalt Mortar
Experimental Research on Anti-Cracking Ability of Polyacrylonitrile Fiber Mortar
Experimental Study of Influences of Initial Temperature on Cement Grout Performance
Impact of Composite Mineral Admixture on Carbonization Resistance of High Performance Concrete
Influence of Layered Materials on Properties of Cement Stabilized Macadam
Inversion of Material Parameters of Composite Fiberglass Box Structure
Mechanical Properties of High Strength Desert Sand Concrete
Nonlinear Structural Analysis of Fire-Exposed Reinforced Concrete Column
Research on Separation and Regeneration Aggregate of Recycled Asphalt Mixture Road Performance
Comprehensive Evaluation of Asphalt-Mixture Performance Based on Principal Component Analysis
Chapter 5: Biomaterials and Technologies
A Comparison of Gelling Properties Stability of Dry-Heating and Maillard-Type Egg White Proteins
Fabrication an Antibacterial Surface on Composite Porous Scaffold
Investigation of the Surface Modification on Biomedical Magnesium Alloy
Nonenzymatic Glucose Electrochemical Oxidation Based on Pt Decorated MWCNTs-PVA Hybrid Electrode
RSM as an Approach to Optimize Ginger Intermittent Microwave Drying Process
Study of the Degradation Behaviour of Biomaterial Mg-4.0Zn-2.0Sr Alloy in SBF
Synthesis and Characterization of the Bio-Based Oligomer
The Influence of the Addition Element of Zn and Sr to Degradation Behavior of Pure Magnesium
Electrospun Hydroxyapatite/BMP-2 Grafted PLLA Nanofibers for Guided Bone Rebuilding Scaffold
Chapter 6: Chemical Materials and Technologies
Effect of Dimethyl Sulfoxide (DMSO) on Cellulose Solution with High Concentration
Flexible Graphene Paper as a Binder-Free Anode Material for Lithium Ion Batteries
Highly Selective Separation and Enrichment of Phosphopeptides by Uranyl-Salophen Immobilized Silica Gel Material
Influence of Co(ii) Ionic Liquids Catalytic System for Polycarbonate (CHO/CO2) Synthesis
Preparation of Sodium Paeonolsilate Intercalated into Layered Double Hydroxides and its Release Properties
Preparation of Zeolite from Waterworks Sludge for Ammonium Ion Removal in Wastewater
Radical Polymerization of a Novel Methacrylamide Derivative
Simulation Study of the Volume Properties and Diffusion of 1-Butyl-3-Methylimidazolium Tetrafluoroborate/Ethanol Mixture
Sorption of Pb(II) on Iron Hydroxide Modified Diatomite
Synthesis and Application of the Three-Component Lyotropic Liquid Crystal
Synthesis and Characterization of Thiol Functional Cyclic Carbonate
Synthesis and Crystal Structure Hindered Amine with Methaerylate
Synthesis of Hyperbranched Polyphenylacetylene Resins and the Influence of their Molecular Architecture on their Properties
The Application of Dye Materials on Efficient Visible Light Photocatalysis
Biomineralization-Inspired Synthesis for Hierarchical Structured ZnO Powders with Enhanced Potocatalytic Activity
Evolution of Phase Structure and Micro-Morphologies of the La0.7M0.3MnO3 (M=Ca, Sr) Sintered at Different Temperature
Study of Salen(Al) Complex Catalytic System in Ring-Opening Polymerization of Lactide
Conversion of Chitosan into 5-Hydroxymethylfurfural via Hydrothermal Synthesis
Density Functional Studies on the Standard Heats of Formation for Nitroaromatic Molecules
Influence of Cadmium Oxide on Thermal Hazard of AP-CMDB Propellants
Swelling Kinetic Study of Poly(Vinyl Alcohol)/Poly( -Glutamic Acid) Blend Hydrogel
Chapter 7: Material Testing, Characterization and Applications
Analysis of Impact of Moisture Content on Rock Thermal Conductivity Coefficient Using TCS Method
Effect of Surface Treatment on the Stress Corrosion Cracking of 304 Austenitic Stainless Steels in Acid Chloride Solution
Fatigue Properties and Fracture Characteristics of the Aluminum Alloys for High-Speed Train Carbody
Influence of Predeformation on Mechanical Behavior of Hastelloy C-276
Iron Temperature Field Finite Element Analysis and Measurement Verification
Lifetime Estimation of Chain Plates for Floodgates Working in Seawater by Continuum Fatigue-Creep Damage Theory and Transient Analysis of Diffusion Process of Hydrogen
Qualimetric Evaluation of Aluminum Wire Deformed by a Combined Scheme of Deformation "Pressing-Drawing"
Strength Testing of Fabric Composite Material and Impact Simulation for Airbag Landing System
Study of Influence Factors on Medium-Density Fiberboard Thermal Analysis
Study on Testing Methods for Thermophysical Properties of Materials
The Estimation of the Thermal Properties of Refractory Materials According to the Temperatures Acceleration Curve at the Blast Furnace Blowing-In
The Evaluation of Absorption Performance of Magneto-Rheological (MR) Elastomer
Non-Linear Finite Element Analysis on Rubber O-Sealing Ring of SRM
Preparation Method and Device of Microcellular Sheet Based on Batch Foaming
The Effect of Laser Power Density on Laser Covered Graphene
Elastic-Plastic Constraints Analysis for Hole-Edge Crack
Study on Phenolic Foams Modified by Graphene Oxide
Experimental Research about Polyester Viscose Seat Fabric Water and Oil Repellent Finishing
An Experimental Study of Compatibility for Metallic Inserts Bonded into CFRP Laminates Soaked in Aircraft Fuel
The Method of Two-Dimensional Stretching to Reduce Residual Stress in Quenched Thin-Walled Aluminum Alloy
Application Reseach of Oriental Silicon Steel Sheet Used in the Table Motor
Investigation on Compression Properties of Syntactic Foam Reinforced by Warp Knitted Spacer Fabric
New Aluminum Plated Corrugated Cardboard Material and Application
The Lightweight Design and Simulation of Hydraulic Steel Gate with Metal Sandwich Construction
Mathematic Model of Liquidus Temperature in Quaternary Aluminum Phase Diagram
Research and Application of Model Materials Based on Soft Rock Model Test
Soft Soil Subgrade Vacuum Preloading Consolidation Deformation Analysis of Large Rigid Foundation
Compression Performance of Composite Stiffened Panels with Scarfed Holes and Scarfed Bonded Repairs
Loading Tests of Thin Plates Made of Ultra-High Performance Concrete Reinforced by PVA Fibers and 2D Textile Glass Reinforcement
Erosion Study of Silica Phenolic Nozzles with Graphite Inserts in Solid Rocket Motors
Study on Constitutive Equation of 7085 Aluminum Alloy under High Deformation Temperature
Microwave Dielectric Properties of (Ca0.8Sr0.2)x(Li0.5Nd0.5)1-xTiO3 Ceramics
Chapter 8: Surface Engineering and Coating Technology
A Comparison of the Complex Wettability between Locust and Moth Wing
An Improved Indentation Method for Estimating Limits of Fracture Toughness in Brittle Films
Effect of Y2O3 on Microstructure and Oxidation Behavior of Aluminide Coating on Ni-Based Superalloy
Effects of Nano Silver Film on the Hydrophobicity of Moth Wing
Microstructures and Mechanical Properties of Aluminum Coating Produced by Friction Stir Processing
Ni-Cr-Al Coating Layer Modified by Friction Stir Processing - Analysis of Microstructure and Element Diffusion
Research on Induction Cladding Alloy Layer on the Surface of Steel Parts and its Performance
Research on the Modification of Water-Borne Inorganic Zinc-Rich Coatings and its Performances
Study on Macroscopic Morphology, Microstructure and Hardness of F313 Iron-Based Coatings Prepared by Laser Cladding Using Different Powder Feed Rate
The Effect of Scanning Power on AISI 434L Stainless Steel-Based Composite Laser Cladding Coatings
The Influence of CTAB Surfactant on the Dispersion of Al2O3 Particles and Deposition Rate of Electroless Ni-P-Al2O3 Coatings
The Morphology in Film of Polystyrene-b-Polylactide after Temperature Annealing Process
The Role of Hierarchical Micro-Morphology in the Wetting Property of Moth (Geometrinae) Wing Surface
Study on Wear Mechanism of an AlSi-Hexagonal Boron Nitride Abradable Seal Coating
Preparation and Properties of Water-Based Ultra-Thin Fireproof Coating for Steel Structures
Structure and Field Emission Properties of CNx Powders Synthesized by a Polymerization Process
Chapter 9: Materials Processing Technology and Applied Research
A New Hot Stamping Process with Quenching and Partitioning Treatment
Analysis of Microstructure and Mechanical Properties of 2A97T3 Al-Li Alloy Fiber Laser Welding Joint
Analysis of Stress and Strain on Shaft Parts for Closed Type of Cross Wedge Rolling during Stretching Stage
Analysis of Transverse Flatness Distribution of Steel Plate during the Quenching Process
Analysis on the Welding Thermal Field and Residual Stress of Thick Plate
Application Research of Hot Stamping Base on the Forming History
Calculation Method of Laser Spot Coincidence Degree of Laser Micro Machining
Comparison of Stress Filed and Deformation of MAG and TIG for Cr13 Based on Finite Element
Development and Application of Process Control System to the Pilot Hot Rolling Mill
Development and Research of Pressing Technology of Billets in New Design of Equal Channel Step Matrix
Effect of Deformation Temperature on Microstructure Evolution for 20CrMnTiH Steel during Hot Compression
Effect of Edge Masking on Residual Stress of Hot-Rolled Strip on Run-Out Table
Experimental Study on Cryogenic Gas Atomization Jet Cooling Difficult-to-Cut Material
Experimental Test on Continuous Drying Sintering Apparatus by Heating Roller Type
Grafting Polypropylene under Ultrasonic in Water Suspension System
Influence of Plasma Torch Nozzle Design on Plasma Arc Analyzed with Finite Element Method
Influence Rules of Technological Parameters on End Quality in Closed Cross Wedge Rolling (CWR)
Investigating the Application of Ultrasonic Welding Technology in Waterproof Composites
Kinetics Analysis on Process of Direct Smelting and Alloying between High-Carbon Ferrochrome and Molybdenum Oxide
Metal Turning Mechanical Model of Machined Surface Roughness
Noise Analysis of Diamond Saw Blade
Numerical Simulation of Distortion of Rectangular Tube with Multi-Point Stretch Bending
Numerical Simulation of the Dynamic Stress Field Based on DEFORM in the Friction Stir Welding of Al Alloy
Optimization of Rolling Modes on the Mill 1700 of JSC "ArselorMittal Temirtau" with Aim to Increase Quality of Sheet Rolled Products
Parameter Optimization for Grinding Process of Micropores with High Aspect Ratio
Parameters Research of Precise Straightening Process in Roll Straightener
Pass Design and Finite Element Simulation for Trapezoidal Stainless Steel Sieve Bar
Quality Cost Analysis of Typical Forging Based on SPC and DEA Model
Radius Compensation in Lateral Bending of L-Shape Plate Considering Rollers Deflection
Research and Application of Milling Parameters Optimization Based on Genetic Algorithm
Research and Development of Precision MIG/MAG Welding
Research of Fused Deposition Modeling Process Oriented Component Design
Research on Dynamic Recrystallization Behavior of Extra-Heavy Backup Roll Forming Process
Research on Stable Forming of Titanium Alloy Bar Using Three-Roll Skew Rolling
Research Progress in Technology of Diamond Cutting Tools
Simulation on the Temperature Field of Milling Roller Using Fluent Software
Simulation Study on the Force of Particles Migrating in Molten Metal under High-Frequency Magnetic Field
Springback Analysis of Thin-Walled Stainless Steel Bellow in Hydroforming
Study on the Microstructure and Property for T-Joints of Al-Li Alloy Welded by Double Sided Synchronization Fiber Laser
Study on Tool Wear in Green Milling Ni-Based Superalloy
Study on Welding-Seam Characteristics and Formation of Tailor-Welded Blanks with Big Unequal Thickness
The FEM Analysis for Feed Rate of Plate Multi-Point Composite Incremental Forming
The Influence of Metal Surface Roughness on Bonding Strength of Metal and Composite Material
The Research on Diameter Growth of Deep Groove Ball Bearing Inner Ring in Cold Rolling Process
The Research on the Generated Mechanism about the End Concavity of Shaft in the Closed Type of Cross Wedge Rolling
Velocity Control with SGARC 440 Alloy in the Roll Forming Process
Simulation of the Surface Roughness by End Face Grinding Wheel with Ordered Abrasive Pattern
Effect of Different Methods on Properties of SMA490BW Steel Welded Joints
Microstructure and Mechanical Properties of Electron Beam Welded 5A90 Al-Li Alloy
Study on the Microstructure of Thermoforming
Study on Typical Metal Forming Pattern of Ultrasonic Vibration Assisted Upsetting Process
Finite Element Simulation for Laser Deposition Process of Graphite Copper Gradient Composite of Thermal Stress
Numerical Simulation of Distribution Characteristics of Electromagnetic Field for Round Billet with Mold Electromagnetic Stirring
Effect of Load Direction on Failure of Out-of-Plane Composite Joints
Research on the Low Cycle Fatigue Properties of PC/ABS Blend
Effect of Equal-Channel Angular Pressing Passes on Corrosion Behavior of Ultrafine-Grained Pure Iron
「Nielsen BookData」 より