Binders, materials and technologies in modern construction : selected, peer reviewed papers from the 12th Conference Silicate Binders 2014 (ICBM 2014), December 4, 2014, Brno, Czech Republic
Author(s)
Bibliographic Information
Binders, materials and technologies in modern construction : selected, peer reviewed papers from the 12th Conference Silicate Binders 2014 (ICBM 2014), December 4, 2014, Brno, Czech Republic
（Advanced materials research, v. 1100）
Trans Tech Publications, c2015
- : pbk
Available at / 1 libraries
-
No Libraries matched.
- Remove all filters.
Note
Includes bibliographical references and indexes
Other editors: Dominik Gazdič, Vít Petránek, Iveta Hájková and Radek Magrla
Description and Table of Contents
Description
Collection of selected, peer reviewed papers from the 13th Conference Silicate Binders 2014 (ICBM 2014), December 4, 2014, Brno, Czech Republic.
The 44 papers are grouped as follows:
Chapter 1: Cement and Binders Based on Cement;
Chapter 2: Inorganic Binders;
Chapter 3: Silicate Materials;
Chapter 4: Research and Assessment Properties of Building Materials
Table of Contents
Preface and Organization
Chapter 1: Cement and Binders Based on Cement
Effect of Superplasticizers on the Cement Hydration Process
Physic-Mechanical Properties of Cement Composites Consisting of Organic Raw Materials
FBC-Ash as a Substitute of Part Material Raw during Production of Portland Cement
Chapter 2: Inorganic Binders
Chemical Analysis of Historic Lime Mortars: Role of Sample Preparation
The Influence of Curing and Process of Hydration to Damping Coefficient of Alkali Activated Slag Mortars
Effect of Carbon Nanotubes and Hydroxypropyl Methylcellulose on the Mechanical Properties and Cracking Tendency of Alkali-Activated Slag
The Utilization of Waste Aluminosilicate to Prepare Cement Composite with Thermal Insulating and Drying Effect
Mix Design of Hybrid High-Volume Fly Ash Alkali Activated Cement
High Strength Alkali Activated Slag Cements with Controlled Setting Times and Early Strength Gain
The Analysis of the Behavior of Alkali-Activated Materials Applied as a Repair Mortar
Modification of Natural Anhydrite by Mixed Exciter
Laboratory Burning of Anhydrite from Phosphogypsum
Production of Alpha Plaster Modification by Pressureless Method
Burnt Hydraulic Binder on the Basis of FBC Ashes
FBC - Ash as Principal Constituent of Mixed Hydraulic Binder
Chapter 3: Silicate Materials
Selected Parameters of Mortars Containing Fine-Grain Modification of Glass and Clay Brick
The Difference between Traditional and Bone Porcelain Body
Modelling of Moisture Behaviour of Brick Fittings Masonry with Filled Hollows with Boundary Conditions of Winter Season
Chapter 4: Research and Assessment Properties of Building Materials
Thermal Insulation Plasters Utilising Natural Fibres
Sulfuric Acid Attack on Various Types of Fine Grained Concrete
The Assessment of Durability of Fibre Concretes with Dense Aggregate and Concrete Recyclate from the Results of Permeability and Diffusion Tests
Impact of External Environment on Long-Term Mechanical Properties of Plasters
Substitution of Cement-Bonded Particleboards Filling and Binding Agent by Selected Types of Alternative Raw Materials
Influence of Concrete Curing on Modulus of Elasticity
Ultrasound Measurements for the Detection of Disintegration of Concrete Slabs Exposed to Fire
Influence of Addition of Fly Ash on Selected Properties of Concrete for Watertight Tunnel Lining
The Development of Sprayed Concrete for Extreme Temperatures
Plasters with Decorative Function Containing Alternative Raw Materials
Microstructure of Lightweight and Decorative Renders with Modified Composition
Effect of High Temperatures on Microstructure of Repair Mortars Containing Artificial Aggregate Based on Sintered Ash
Effect of Concrete Mixture Composition on Acoustic Emission and Fracture Parameters Obtained from Three-Point Bending Test
The Laboratory Verification of the Absorption of Bitumen Waterproofing Sheets in the Dependence on Selected Parameters
Temperature Control in High Performance Concrete
Epoxy Screed as Possible Protection of Floor Surfaces
The Effect of Additives on the Properties of Lightweight Concrete Screed
Possibilities of Sugar Content Reduction in Filler of Cement-Bonded Particleboards
Experimental Determination of Mechanical Characteristics of Four Types of Stones and their Influence on the Construction Machinery Parts Wear
Test of Adhesion and Shear Strength of Polyurethane Adhesives to Cement-Bonded Particleboard
Testing of Waterproofing Gels Penetration Rate while Exposure to Higher Temperature
Comparison of Dynamic Young's Modulus of Elasticity Values Measured by Ultrasonic Pulse and Resonance Methods
The Study of Washed Recycled Concrete Aggregates and Blast Furnace Slag Utilization in Concrete Production
Beneficial Reuse of Reservoir Sediments in Concrete Production
Secondary Raw Materials Obtained from Solar Panels and their Use in Material Engineering
The Examination of Waste Industry Sludge Solidification/Stabilization Possibility
by "Nielsen BookData"