Modern design technologies and experiment for advanced manufacture and industry : selected, paper from the 3rd International Conference on Engineering and Technology Innovation held in Kenting, Pingtung, Taiwan, R.O.C., October 31-November 4, 2014
Author(s)
Bibliographic Information
Modern design technologies and experiment for advanced manufacture and industry : selected, paper from the 3rd International Conference on Engineering and Technology Innovation held in Kenting, Pingtung, Taiwan, R.O.C., October 31-November 4, 2014
（Applied mechanics and materials, v. 764-765）
Trans Tech Publications, c2015
- : [set]
- Part 1
- Part 2
- Other Title
-
ICETI 2014
Available at / 1 libraries
-
No Libraries matched.
- Remove all filters.
Note
Includes bibliographical references and indexes
Description and Table of Contents
Description
Collection of selected, peer reviewed papers from the 3rd International Conference on Engineering and Technology Innovation held in Kenting, Pingtung, Taiwan, R.O.C., October 31 - November 4, 2014.
The 275 papers are grouped as follows:
Chapter 1: Materials Processing Technologies and Analysis, Materials Engineering;
Chapter 2: Advanced Design for Thermal and Mechanical Engineering;
Chapter 3: Development and Technologies in Electrical and Electronic Engineering, Communication and Power Engineering Applications;
Chapter 4: Control and Automation Technology, Mechatronics, Robotics for Manufacture and Industry;
Chapter 5: Advanced Development for Information Technologies and Engineering, Networks and Software Applications, Data Acquisition and Processing, Intelligent Systems;
Chapter 6: Modern Design for Green and Environmental Technologies, Energy-Saving Technologies, Structural and Civil Engineering, Applied Mechanics Applications;
Chapter 7: Contemporary Development for Optical Engineering, Image Processing, Quality and Analysis, Measurement, Instrumentation and Detection Technologies
Chapter 8: Innovation in Management and Design, Related Topics
Table of Contents
Preface and Committees
Chapter 1: Materials Processing Technologies and Analysis, Materials Engineering
A Finite Element Approach to the Behavior of the ITZ
A Study on the Mechanical Characteristics of Cu-CNT Composites by Extrusion Process
Apparent Activation Energy for Predicting Compressive Strength of Concrete Using Blast Furnace Slag
Characteristics of Graphite-Impregnated Resin-Bonded Cubic Boron Nitride Composites
Characterization of Mechanically Alloyed Al5083 Alloy and Composite and Consolidation by Equal Channel Angular Pressing
Compensating for Creep Effects in One-Indent Nanoindentation Tests
Deformation Behavior of Artificial Rock in the Split Hopkinson Pressure Bar Test
Effect of Fiber Length on Direct Tensile and Impact Strength of Cmentitious Materials Containing Silica Fume
Engineering Properties of Fiber Cementitious Materials
Fabrication and Characterization of Amine Compounds Synthesized from Carbon Dioxide and Ammonia Water Using Transition Metal Doped TiO2
Microstructural Transformation of Titanium-Boron Carbide (B4C) Powder Mixture during Spark Plasma Sintering
Modelling of Texture Evolution in High Pressure Torsion by Crystal Plasticity Finite Element Method
New Cold Forging Process of Retaining Pin Using FEM Based Simulation
Numerical Simulation of Nanoindentation of Single Wall Carbon Nanotube Reinforced Epoxy Composite
Optimization of Composite Laminates for Fundamental Frequency
Overaged Samples and Growth of Eutectics Mg-6Gd-3.7Nd Based Alloys
Performance Characteristics of Asphalt Mixtures with Additives
Resistive Switching Characteristics in Boron Doped Zinc Oxide Films
Supercritical CO2 Extraction of -Linolenic Acid from Spirulina platensis
Surface Modification of ZrO2 by Silane and the Stability Study
Thermal Process of Drilling for Metal Thin Films Using Femtosecond Laser
Toughness and Thermal Properties of a Dimer Acid Modified Tetrafunctional Epoxy Resin
An Experimental Evaluation of Structural Performance for High Strength Steel Stub Columns under Eccentric Loads
Design and Evaluation of Asphalt Mixtures for Stress Absorbing Pavement Layers
One-Step Gradual Forging Process by Using Direct Heating Billet within Die
Structural Performance Evaluation of Built-Up Stub Steel Column with Various Steel Grades under Concentric Loading
Pore Distribution and Durability of Cement Mortar by the Magnetic Resonance Imaging
Depositing High-Performance Conductive Thin Films by Using Atomic Layer Deposition
Stress Analysis and Improvement of Extrusion Dies Using Combination of FEM with Taguchi Method
Study of CIGS Thin Films Solar Cell P2 Layer Scribing Using UV Laser
Chapter 2: Advanced Design for Thermal and Mechanical Engineering
A Flexible Bearing with 1-DOF Translation for High-Precision Mechanism
A Layered-Rheology Model for Thin Film Elastohydrodynamic Lubrication of Circular Contacts
A New Design for Enhancing the Performance of Hidden Ceiling Fan
A New Hybrid-Driven Five-Bar Linkage Mechanism
A Study on the General CAD Model for Rotary Milling Cutters
Analysis of Main Steam Line Break for a Pressurized Water Reactor
Analytical Study on Performance of a 250-kW Organic Rankine Cycle System under Off-Design Heat Source Temperatures by the Flow Rate Control Approach
Approach for Hydraulic Pump Fault Diagnosis Based on WPT-SVD and SVM
Bearing Performance Degradation Signal Simulation Based on Health Confidence Value Injection and FPGA
Chaos and Nonlinear Dynamic Analysis of Porous Air Bearing System
Contact Ratio of Space Curve Meshing Skew Gear Mechanism
Crank Arrangement on the Dynamics of a Quadruped Walking Machine
Creative Mechanism Design on Stroller Structure
Design and Experiment of the Magnetorheological Damper with Multiple Poles
Design of 3-Speed Bicycle Transmission Hubs
Design of Cam Mechanisms with a Translating Follower Having Symmetrical Rollers
Design of Novel Hydrodynamic Grooved Journal Bearing with Dual-Layer Herringbone-Grooved Patterns
Design of the Cooling Module of LEDs Based on the Aluminum-Acetone Flat Plate Heat Pipe
Development of Barrel Heating via Induction in Injection Molding Machine
Dynamics Analysis of Energy Absorbing Device Based on Damped Dynamics Vibration Absorber
Effective Numerical Analysis Method for Roll-to-Roll System Having the Large Nonlinearity Property
Enhanced Fault Diagnosis of Bearings in Gearbox Based on Lucy-Richardson Deconvolution and Discussion
Estimation for Temperature Distribution of PET Preform Surface under Multiple Lamps
Feature Extraction Technology for Rolling Bearings Based on Local Tangent Space Alignment
FEM Simulation and Experimental Verification on Rotating Compression Forming of Double-Layer Clad Ring Considering Shear Friction
Finite Element Analysis on Natural Properties of a Micro Drill with Ultrasonic Vibration
Finite-Element Analysis of the Magnetostatic Field of a Coaxial Magnetic Gear Device
Health Assessment and Fault Diagnosis for the Heat Exchanger of the Aircraft Environmental Control System Based on STF-LR
Heat Transfer Analysis for Line-Finned Heat Sink with Vertical Passages
Hybrid Weights-Utility and Taguchi Method for Multi-Objective Optimization Problems
Incipient Faults Identification in Gearbox by Combining Kurtogram and Independent Component Analysis
Meshing Efficiency Analysis of Straight Spur Gear Pair
Noise Reduction on Centrifugal Fan via the Quarter-Wave Resonator
Nonlinear Transient Finite Element Analysis for Rifle's Power Transmission Mechanism with Structure Coupling Effects
Performance of a Lead Rubber Damper under Cyclic Lateral Loading
Power-Flow Path Analysis of an Existing 8-Speed Bicycle Drive Hub
Prediction of Tribological Experiment Factors Relationship by Grey Theorem
Real-Time Reliability Evaluation and Life Prediction for Bearings Based on Normalized Individual State Deviation
Research of Mechanical Vibration Signal Classification Based on LMD
Rotating Ring with Thermo-Elastic Damping and Point Masses
Safety Assessment of Heave Compensator Using Multi-Body Dynamics
Squeal and Thermal Analysis of Automobile Disc Brake Rotors
The Engineering Design of Helical Spur Gear Transmission with Single Gear Pair for Electric Scooter
The Response of a Rectangular Thin Plate Subjected to In-Plane Narrow Band Noise Excitation
The Study on the Innovation Bicycle Design Using Functional Element Characteristics
Theoretical and Experimental Investigation of Molecular Spring Isolator
Thermal Analysis on Finned Heat Sink with Thin Porous Layers
Thermal Characteristic Analysis CNC Multi-Grinding Machine
Thermal Performance in a Rectangular Divergent Channel with Parallel Angled Ribs
Thrust Study of a Novel PM Linear Synchronous Motor
Analysis of DeNOx by SNCR in a Carbon Monoxide Boiler
Analysis of Electromagnetic Force for the Linear Generator Wave Energy Converters
Calculation of Combination Coefficient and Drag Coefficient for the Throwing Materials of Inertial Rotary Vibrating Screen
Real-Time Life Prediction for Rolling Bearings Based on Nonparametric Bayesian Updating Method
Chapter 3: Development and Technologies in Electrical and Electronic Engineering, Communication and Power Engineering Applications
A Compact Dual-Band MIMO Antenna for WLAN Applications
A Multiple Objective Fitness Function Design Scheme for GA-Based Cognitive Engines
A Novel Algorithm for a Single-Phase Active Power Filter
A Novel Decision Rule for Spectrum Sensing in Dynamic Traffic Circumstances
A Reshaping Method for Wind Turbine RCS Reduction
A Side-Peak Cancellation Scheme for Unambiguous BOC Signal Tracking
A Single-Stage DC Uninterruptible Power Supply
A Sub-1V 0.18um Output-Capacitor-Free Digitally Controlled LDO
Analysis and Implementation of Rayleigh Fading Channel Using MATLAB
Analysis for Temperature Rise of a Three-Phase Four Limbs Transformer by Soil Structure with DC Bias
Applications of GaN-Based High Electron Mobility Transistors in Large-Size Devices
Balancing for Lead-Acid Batteries of Electric Motorcycles
Design and Implementation of a Microprocessor-Based PI Controller for PMSM Drives
Electromagnetic Radiation Emission Model of Motor Drive System
High Pumping Gain Dickson Charge Pump Using Improved Bootstrapped Technique
Hybrid Analog/Digital Modulations Using Polarization Multiplexing OCDMA Scheme in Free Space Optics
Impact of Parasitic Capacitor to the GaN HEMT Devices
Improvement of On-Resistance Degradation Induced by Hot Carrier Injection in SOI-LDMOS
Optimization of Holding Voltage for 5V Multi-Finger NMOS Using Voltage Stepping Simulation
Simulation of P-Type Doping Profile Prediction Using Different Ion Implantation and Diffusion Model
Unambiguous Composite BOC Signal Tracking Based on Partitioned Sub-Carriers
Using GaN-Si FET Cascode Switches for Improving the Light-Load Efficiency of LLC Converters
Using Wavelet Hybrid Self-Organizing Feature Map Network for V-I Based Multiple Harmonic Sources Classification
Localization Experiments Based on Inertial Sensors for Navigation Applications
Mitigation of Multipath Errors Using the Iterative Least Absolute Deviation Approach
Neural Network Assisted Vector Tracking Loop for Bridging GPS Signal Outages
Multipath Parameter Estimation Using the Unscented Particle Filter Based Code Tracking Loop for Non-Gaussian Noises
Robustness Enhancement of GPS Vector Tracking Loop Using the Fault Detection and Exclusion Algorithm
Vibration Influence for Transporting Photovoltaic Cell
Implementation of Smart Home with Multi-Channel Technology
Chapter 4: Control and Automation Technology, Mechatronics, Robotics for Manufacture and Industry
2-Phase Precision Alignment Visual Feedback Control System
A Hybrid Intelligent System for Wind Shear Encountered Aircraft Landing Control
Application of Lean Six Sigma to Develop a High Precision Relative Humidity Control
Energy Comparisons of the Adaptive Tracking Control for a Linear Drive System
Fault Diagnosis and Fault-Tolerant Control of Micro-Satellite Propulsion Mode Attitude Control
Performance Assessment of Hydraulic Servo System Based on Radial Basis Function Neural Network and Mahalanobis Distance
RBFNs Nonlinear Control System Design through BFPSO Algorithm
Robust H Control for Takagi-Sugeno Fuzzy Systems with Time-Varying Delays in State and Input
Robust Output Observer-Based Control of Neutral Uncertain Systems with Discrete and Distributed Time Delays
TIG Auto Welding Process Using Adaptive Wavelet Neural Network Controller
Web-Based Supervisory Control System Based on Raspberry Pi
Automatic Prediction Model of Ground Vibration for High-Speed Trains
Design of Agent-Based Production Information Retrieval System Architecture for Injection Machines
Two Dimensional Intelligent Feedrate Control Incorporating Stage Dynamics
On Study Intelligent Heat Dissipation System
An Improved IMM Estimator Combined with Intelligent Input Estimation Technique for Tracking Maneuvering Target
Characterization of the Electrically-Actuated Micro Circular Plate
Designing FIRA Medium-Sized Soccer Robot Vision System Using Particle Swarm Optimization
Development of a Tracking System on the Mobile Robot
Development of Orthogonal Electric Steering Loading System
Fault Detection and Isolation for Hydraulic Servo System Based on Adaptive Threshold and SOM Neural Network
Hybrid Autonomous Sensor-Based Recognition Fuzzy Mobile Robot System Designs
Health Assessment of Hydraulic Servo System Based on Fractal Analysis and Gaussian Mixture Model
Integration of 3G Wireless Image Transmission System with the Aerial Search and Rescue UAV
Integration of the Target Position Correction Software with the High Endurance Quadcopter for Search and Rescue Mission
Self-Adaptive Fault Detection and Performance Assessment of a Rotary Actuator Based on Residual Analysis
Visually-Guided Based Automatic Navigation for Disaster Detection Robots
Using Laser Range Finder Obstacle Avoidance and Using TLD Positioning System of Mobile Robot
Equivalent Circuit Construction of a Novel Ultrasonic Actuator
Fault Detection for an Aileron Actuator under Variable Conditions Based on Bi-Step Neural Network
Nonlinear Dynamic Characteristics of Magnetic Shape Memory Alloy Actuator
Indoor Map Building by Laser Sensor and Positioning Algorithms
Computer-Aided Dynamic Analysis and Simulation of Multibody Manufacturing Systems
Performance Degradation Prediction for a Hydraulic Servo System Based on Elman Network and Support Vector Regression
Development of an Unmanned Combat Vehicle with its Training System
Chapter 5: Advanced Development for Information Technologies and Engineering, Networks and Software Applications, Data Acquisition and Processing, Intelligent Systems
A Cloud Multi-Tenant Architecture for Developing Machine Remote Monitoring Systems
A Method for Migrating Applications to Clouds
A Novel Watermarking Method for Synchronous Transmission of Gong-Che Notation Score and its MIDI Information
A Novel Wireless Data Acquisition Infrastructure for Manufacturing Equipment Based on Wi-Fi
A Real-Time Data Filter for Interactive-TV Rating System
A Storage-Independent Model for SPARQL-to-SQL Translation Algorithms
A Study of Cloud Computing Based Context-Aware Healthcare App
A Study on Simulating Landslides Using Unity Software
An Anonymous NFC-Based Payment Protocol
An Efficient Two-Mode Routing Protocol in Dense and Sparse Vehicular Ad Hoc Networks
An Empirical Study on the Implementation and Evaluation of Gamifying Learning Motivated Achievement Model
An Energy Balancing Cross Layer Scheme for Long Lifetime Wireless Sensor Networks
An Intelligent Mouse Wheel-Design Concept and Application
An Opportunistic Large Array Concentric Geographic Routing Algorithm with a Relay Node in Wireless Sensor Networks
APP Rush, a Platform of Learning APP Development Skills for Information Management Students
Cloud-Based Mechanical Design Oriented Python Program Development System
Cooperative Car Video Share and Search System
Cryptanalysis of Ahirwal-Sonwanshi ID-Based Remote User Authentication Scheme
Depth Image Compression and Error Concealment for 3D Video Communication
Design a Cloud Roll Check System via RFID
Design and Implementation of Cloud-Dust Based Intelligent System
Design of Cloud Load Balance Architecture for Web Servers
Development of Cloud-Dust Based Intelligent Maximum Power Analysis System for Photovoltaic
Energy-Efficient 2-Covered Path Routing for Distributed Wireless Sensor Networks with Variable Transmission Ranges
Enhancements of SVM Speaker Recognition by Dynamic Time Wrapping
Enhancing the Effect on Project Success through Information Presentation
ET Detector: A Client-Based Solution to Detect an Evil Twin Access Point
Evaluation of Traffic Data Collection Method
FCA-Based Data Analysis for Discovering Association Rules in Social Network Service
Home Security Service Enhanced with Information Stations
Impact of Informal Network on Opinion Dynamics in Command and Control Network
Improved OpenID Authorization Registration Process
On the Performance of Weakly Connected Dominating Set and Loosely Coupled Dominating Set for Wireless Sensor/Mesh Networks
Ontology Integration Framework Based on XMDR+
Opportunistic Frame Forwarding in Wireless Mesh Networks
P-AODV: Energy-Aware Routing for Wireless Mesh Networks
Secure Data Synchronization over a Mobile Peer-to-Peer Network
Spelling Check Combined Language Models and Knowledge Resources for Printer Drivers
Taurus: Preventing Stealthy SMS Activities on Android
The Improved Customer Satisfaction Prediction System on Airlines Service by Using Cloud Computing Based Intelligent Strategy System
Three-Dimensional Object Encoding Approach Using Computer-Generated Integral Imaging and Random Phase Encoding
Time Series Forecasting with Stochastic Markov Models Based on Fuzzy Set and Grey Theory
Toward a Unified Approach to Software Reliability Modeling under Imperfect Debugging
Toward Meta-Software Engineering Multistage Process
Using Serial Episode Mining to Identify Internet Attacks
Video Image Encryption Technique Using Maximum-Length Cellular Automata and Arnold's Cat Map
POI Detection and Route Identification Using Smartphone Sensor Data
Predicting Personal Transportation Modes Using Uncertain Smartphone Sensor Data
Using Multi-Core to Debug Interactive Applications
Chapter 6: Modern Design for Green and Environmental Technologies, Energy-Saving Technologies, Structural and Civil Engineering, Applied Mechanics Applications
A New Procedure for Structural Fault Estimation Using a Prescribed Eigen-Structure
A Simulation Research for Railroad Freight Car-to-Car End Impact Based on Numerical Analysis
A Study on Shear Strength of the Perfobond Rib Shear Connector for Composite Beam
Acceleration Response and Serviceability Performance of a 51-Story Building during Typhoon Aere
An Experimental Study on Residual Strength and Deformation Recovery of RC Beams Strengthened with FRP Plate
Centrifuge Seismic Test on Seismic Behavior of Pile Group in Liquefiable Soil
Comparison between Simulation of Reduced Scale Vertical Concrete Cask under the Earthquake Effect and Experimental Result
Damage Diagnosis of a Structure in Time-Frequency Domain
Debris as Resources Applied in Wild Creeks Remediation Work
Diagnostics of a Historical Bridge Using Measuring Methods and Inverse Analysis
Dynamic Equilibrium Analysis and Simulation of Submerged Kuroshio Generator System
Energy-Saving Operation Strategies for Air-Conditioning Systems in Response to Challenges Posed by Atmospheric Environment of Taiwan
Experimental Evaluation of Shear Behaviors of Concrete Deep Beams with GFRP Shear Reinforcement
Fault Source Characterization of Probabilistic Seismic Hazard Analysis for the Sites of Offshore Wind Turbine in Taiwan
Fracture Parameters of Fly Ash and GGBS Based Geopolymer Concrete
Geologic Hazard Assessment of Slopeland Villages Using Remote Sensing Techniques
Integrating Domestic Air Conditioner with Solar Water Heater of the Development of an Energy-Saving Heating System
Numerical Investigation on Column Flange Thickness for Cold-Formed Steel Top-Seat Flange Cleat Connection
Response of Concrete Filled Carbon Sheet Tube Column under Axial and Lateral Loads
Seismic Analysis for Pile Foundations in the Liquefiable Soil Layer Using FLAC3D
Seismic Response for a One-Third Scale-Down Vertical Cylindrical Cask Specimen Using Shaking Table Testing
Seismic Response for a Reinforce Concrete Specimen Considering Corrosive Hazards
Seismic Testing and Verification of a 1/25 Scaled-Down Reinforced Concrete Specimen for the Reactor Building
Shear Strength of the Perfobond Connection of a Steel-Concrete Composite Slim Floor System
Structural Damage Identification in Vehicle-Bridge System Based on Measured Dynamic Response
Technology and Conclusions from Long-Term Monitoring of Large Span Roof Timber Construction
The Effect of Seismic Design Methods on Design Eccentricities in Building with Planar Irregularities
The Life Cycle Assessment of Carbon Dioxide Emission of Four Major Sewage Treatment Plants in Taiwan
Vertical Connector Performance of Modular Roadway Slab
Effective Critical Section Evaluation of a Reinforced Concrete Flat-Plate Slab with Openings for its Punching Shear Strength Estimation
Finite Element Analysis of Non-Uniform Beam Made of Axially FGM Subjected to Multiple Loads
Fracture Analysis of a Semi-Elliptical Surface Crack in Hollow Cylinders
Frequency Reliability Sensitivity and Robust Analysis for the Random Axial Vibration of Rod Systems
Impact Analysis of Composite Laminate Shell Structures
Non-Linear Dynamic Analysis of a Reinforced Concrete Bridge Column under Vehicle Impact Loading
Wind Oscillation Analysis for Suspension Bridge
Large Amplitude Free Vibration of Nanobeams Subjected to Magnetic Field Based on Nonlocal Elasticity Theory
Design and Simulations of Water Purification Heating System in Cold Rural Areas
Centrifuge Modeling on Pile Behavior Subjected to Cyclic Lateral Loadings
Chapter 7: Contemporary Development for Optical Engineering, Image Processing, Quality and Analysis, Measurement, Instrumentation and Detection Technologies
A Novel Auto-Focus Measurement System for Mesh Membrane
Design of a Two-Photon Single-Laser Optical Data Storage System in a Multilayer Structure
Developing a Novel Stereovision Scheme for Improving Accuracy of Depth Estimation in Robotic Vision Systems
Efficient Neural Processor for Camera Distortion Correction
Enhanced Design for AWG-Based Dynamic Reconfigurable Free-Spectral-Range Group Hopping Coder/Decoders to Protect against Eavesdropping
Image Quality Improvement with Liquid Field Lens Scheme in 9x Zoom Lens Intermediate Optics
Photoluminescence and Recombination Mechanisms in Nitride-Based Multiple Quantum Wells
Photoluminescence Properties of Eu2+Activated CaAlSiN3 Red Phosphors with Various Eu2+ Contents
Integration of Lenticular Displays with Image Switching and Infrared Watermark
Smart Tourism: Exploring Historical, Cultural, and Delicacy Scenic Spots Using Visual-Based Image Search Technology
An Evaluation Eye Diagram of a High-Reliability FPGA Platform for High-Resolution Camera
Study of the Dynamic Image Stabilizer
Weight Switching Tri-State Median Filter
Design of a High-Reliability FPGA Platform for High-Resolution Image Process System
A Real-Time NCC-Based Template Matching on Modern CPUs
An Innovative and Reliable Wireless Angular Accelerometer Made Directly on a Flexible Substrate without Moving Parts
Applying Structured Light on Cylinder Straightness Detection Using Break Line Method
Efficient Calibration Tool for Thermistor Temperature Measurements
Illumination Variant Face Detection System Using Hierarchical Feature Method
Large Non-Ambiguity Range and Precise Absolute Distance Measurement with Dual Mode-Locked Fiber Lasers
Multimodal Sensor Fusion for Indoor Occupancy Determination
A Height Measurement Based on Laser Triangulation Probe and a Two Dimensional Image Measurement System for Smart Manufacturing
A Novel Calibration Method for Multi-Hole Pitot Tubes
Flow Control and Thermal System Design for Wet Cell in the Scanning Electron Microscope
Nonlinear Magneto-Electric Response Characteristics of Giant Mag-Netostrictive-Piezoelectric Composite Sensors in Harmonic and Stochastic Excitation
RFID-Based Thermal Convection Non-Floating Type Accelerometer with Stacking Material for Heater and Thermal Sensors
Chapter 8: Innovation in Management and Design, Related Topics
Modified Mnet for Performance Improvement in Moodle Learning Management System
Airport Access Road Traffic Demand Estimation
New Lane Departure Warning System Based on Side-View Cameras
Spatial Evaluation of Roadway Infrastructure for Safety Improvement on Expressways
FCM based Hybrid Evolutionary Computation Approach for Optimization Power Consumption by Varying Cars in EGCS
A New Kinect-Based Scanning System and its Application
Sliding Operation for Touch Screen - A Design Concept of Two-Stage Sliding
A Kansei-Oriented Approach for Product Form Design
A Novel Non-Decreasing Temperature Based Simulated Annealing for Flow Shop Problems
Study on 3D Meaningful Mobile Gamification Learning Outcome Assessment - An Example of Blood Circulation Lesson
Using the Event Classifier System to Forecast the Stock Price: An Empirical Study of Taiwan Financial Market
Fusing Multiple Strategies in Population-Based Optimization Algorithm
by "Nielsen BookData"
