Contemporary approaches in material science and materials processing technologies : selected, peer reviewed papers from the 2nd International Conference on Materials Science and Engineering Technology (MSET 2015), April 25-26, 2015, Shanghai, China
Author(s)
Bibliographic Information
Contemporary approaches in material science and materials processing technologies : selected, peer reviewed papers from the 2nd International Conference on Materials Science and Engineering Technology (MSET 2015), April 25-26, 2015, Shanghai, China
（Advanced materials research, v. 1120-1121）
Trans Tech Publications, c2015
- : [set]
- Part 1
- Part 2
Available at / 1 libraries
-
Tokyo Institute of Technology Ookayama Library
Part 1A25118/1120-1400077843,
Part 2A25118/1120-2400077851 -
No Libraries matched.
- Remove all filters.
Note
Includes bibliographical references and indexes
Description and Table of Contents
Description
Collection of selected, peer reviewed papers from the 2nd International Conference on Materials Science and Engineering Technology (MSET 2015), April 25-26, 2015, Shanghai, China.
The 274 papers are grouped as follows:
Chapter 1: Films, Ceramics and Glasses;
Chapter 2: Electrochemistry, Chemical Materials and Technologies;
Chapter 3: Nanomaterials and Nanotechnologies;
Chapter 4: Materials for Microelectronic Industry and Magnetic Materials;
Chapter 5: New Functional Materials;
Chapter 6: Polymers, Composites and Compounds;
Chapter 7: Surface of Materials, Coatings and Surface Engineering;
Chapter 8: Biomaterials, Biotechnology and Biochemistry;
Chapter 9: Metals and Alloys in Industrial Applications;
Chapter 10: Materials Processing Technologies;
Chapter 11: Engineering of Technological Processes;
Chapter 12: Building Materials and Technologies in Construction
Table of Contents
Preface, Program Committee and Sponsors
Chapter 1: Films, Ceramics and Glasses
Micromechanical Properties of Glass-Filled Polyamide 6
Effect of Sintering Temperature on Phase Formation and Dielectric Properties of PLZT-BT Ceramics
Research on Mechanical Characteristic of Micro-Nano Structure TaC Ceramic by Nanoindentation
Initial Growth Mechanism of Atomic Layer Deposited Hafnium Dioxide Using Cyclopentadienyl-Type Precursor: A Density Functional Theory Study
Effects of Al(OH)3 on the Structure and Properties of Foam Ceramics Cemented by Phosphate
Micro-Drilling of Pre-Sintered Alumina Ceramic
Influences of Pre-Sintered Ceramic Compacts Processing Parameters on Tool Wear
Effect of Titanium Dioxide Manufacturing Waste in Mechanical Properties of Red Ceramics
Compositional Dependence of Residual and Interfacial Stresses in Thin Film Systems with Substantial Thermal Mismatch Characteristics
Preliminary Structure Characterization of UV Curing Paint Film
Novel Ordered Layered Double Hydroxides Ultra Thin Films Functionalized with Dawson-Type Polyoxometalates: Synthesis, Characterization and Photocatalytic Behavior under Visible Light
Effect of the Iron Ion Doping in LaCoO3 Perovskite, Both in Powders and in Sintered Samples Obtained from Combustion Reaction and Solid State Route
Improving the Surface Wettability of Parylene C Film by Hyperthermal Hydrogen Induced Cross-Linking Technology
Effect of Cooling Rate, Tungsten Fiber Addition and Annealing on Deformation and Mechanical Properties of Zr-Based Bulk Metallic Glasses Under a Nanoindenter
Effect of Ce Substitution on Mechanical and Thermal Properties of Tetragonal YSZ: First-Principles Calculations
Effect of Sc, Y, Yb, Hf, Ce on Mechanical and Thermal Properties of La2Zr2O7: First-Principles Calculations
Piezoelectric and Ferroelectric Properties of KNN-LS-BF1-xCx Ceramics
Investigation of Preparation and Thermoelectric Properties of Ca2.5La0.5Co4O9 Porous Ceramics
Chapter 2: Electrochemistry, Chemical Materials and Technologies
Study of Leaching Zinc from Difficult Dealt Zinc Oxide Ore with High Silicon in the Alkali
Synthesis and Salt Resistance of Novel Polyampholyte P(DMAPMA-co-HEA)-CA
Electrochemical Properties of Chemically Etched-NbO2 as a Negative Electrode Material for Lithium Ion Batteries
A Preliminary Study on Li4Ti5O12 as a Novel Electrode Material for Calcium Ion Batteries
Effects of Preparation Conditions on Alkali-Activation Reactivity of Chemosynthetic Al2O3-2SiO2 Powders
Study of Circulation of Reaction Liquid in Liquid Phase Synthesis of LiFePO4 as Cathode Material
Synthesis of Li2Fe0.5Mn0.5SiO4/C as Cathode Material for Lithium-Ion Batteries Using Amorphous Li2SiO3
Study on Using Chenghe Fly Ash to Prepare 4A Molecular Sieve
Preparation of CMC-PVA/PAN-FePc(COOH)8/CS-PVA Bipolar Membrane and its Application in Electro-Oxidized Synthesis of Dialdehydle Starch
Lightweight Foams with Open-Cell Structure Prepared by Pickering High Internal Phase Emulsions
Synthesis of and Characterization of Polyhedron of Mn2O3 Nanoparticles Using Spent Zn-Mn Batteries
The Stability Study on Vanadium Dioxide
Supramolecular Complex Formed by Fumaric Acid and Piperazine: Crystal Structure, and Synthon Cooperation
Hydrothermal Synthesis and Structural Characterization of Orthorhombic LiMnO2 with Low Stacking Faults
Crater Structure and Photoluminescence of Porous Silicon
Tuning the Pore Size of Monodisperse SBA-15 Spheres
Shape-Controlled Synthesis and Pattern Recognition of Core-Shell Co-Al Hydroxides Superstructures
Application of Multifunctional Scouring Agent for Cotton Fabric Bleaching
Improvement of Light Fastness of Liyuan Blue FL-RN Reactive Dye
Pilot-Scale Study on Masking Agents for Titanium Tanning
Waste Solid Byproducts of Microalgae Oil Made into Green Energy
Chapter 3: Nanomaterials and Nanotechnologies
Synthesis and Characterization of Poly(o-chloroaniline) Micro/Nanostructures in a Novel Redox System
Controllable Synthesis of Functional Polyaniline Nanotubes via a Complex Template
Preparation and Characterization of Silica/Polymer Hybrid Submicron Particles via a Semi-Continuous Soap-Free Emulsion Polymerization
Preparation of Silica/Polymer Hybrid Nanoparticles via a Semi-Continuous Soup-Free Emulsion Polymerization
Nanocrystalline Diamond Film Deposited by Double Bias-Voltage Assited HF-PECVD System
Effect of n-LaB4O7 Additive on Tribological Behaviors of Ion Nitrocarburized Layer at Higher Temperature
Effect of n-Na2B4O7 Additive on Tribological Performances of Ion Nitrocarburized Layer
Preparation and Characterization of W@SiO2 Shielding Composite Microsphere
The Optimum of Preparation and Characterization of Aerogels like Hydrophobic Titania by Ambient Pressure Drying
Fabrication and Characterization of Nano-Sized Starch Particles
Solvothermal Synthsis of Nano-Sized Li4Ti5O12 Particles as Anode Material for Lithium Ion Batteries
Kinetics and Thermodynamics of Adsorption of Cr(VI) on Nano Magnetic NiFe Particles in an Aqueous Solution
Cobalt Monoxide Nanoparticles Modified Glassy Carbon Electrodes as a Sensor for Determination of Nitrite
Synthesis and Characterisation of WS2 IF Nanoparticles via Solid-Gas Reaction between WO3 and S
Research on the Surface of Nano H68 Alloy Surface Corro Sion Mechanism
PLA Nanofiber Formation during Solution Blowing
Fabrication of Through-Hole TiO2 Nanotube Arrays by Bilayer Ti Foils Anodization
Preparation and Characterization of Carbon/CNTs Hybrid Nanofibers via a Simple Electrospinning Route
Synthesis and UC Luminescence Properties of NaYF4:Yb,Er Microsheets
Property Research of Silk Fibroin Nanofibers by Electrospinning Dissolved in CaCl2-Formid Acid
Silver Liquid-Like Film Prepared by Self-Assembly for Magnetic Fluid Deformable Mirrors
Preparation and Adsorption Properties of Starch-g-Polyacrylamide/Montmorillonite Nanocomposites
Facile Synthesis of Co3O4/Nitrogen-Doped Graphene Composite and their Electrochemical Performances
Biodegradable Oph-POSS/Poly(Lactic Acid) Nanocomposites: Morphology, Thermal Stability and Degradation Property
Preparation and Properties of CNTs Reinforced BMI/DBA Nanocomposites
Excimer Laser Crystallization of Nanocrystalline Silicon Thin Films
The Application of Nanoparticles in Enhancing Oil Recovery by Wettability Alteration
Measuring Microscopic Properties of a Single-Crystalline Diamond by Nano-Indentation Technology
Research on Hall Effect of Graphene by Var Der Pauw Method
Chapter 4: Materials for Microelectronic Industry and Magnetic Materials
Surface Morphology of AlN Nucleation Layer Grown on Si by MOCVD
Hydrothermal Synthesis and Luminescent Properties of Spherical LaPO4:Ln3+ (Ln3+= Eu3+, Dy3+, Ce3+, Tb3+)
Impact of Doping of Bi3+ on Luminescent Properties of Red Phosphors Sr3-xGaO4F:xEu3+
Study on Influence of Ca2+ Ions Doping at a Site on Magnetic Properties and Magnetocaloric Effect of Nominal Compositions La1.4Sr1.6-xCaxMn2O7
Observation of Substrate Silicon Incorporation into Thin Lanthanum Oxide Film during Rapid Thermal Annealing
Photoelectrochemical Properties of Anatase TiO2 Films Prepared by Improved Liquid Phase Deposition
Anomalous Hall Effect of the Co Thin Film Deposited by High-Pressure Magnetron Sputtering
The Optical and Electrical Properties of Al and (Al, Cu) Doped ZnO Film
Temperature Dependent Current-Voltage Characteristics of n-Type -FeSi2/Intrinsic Si/p-Type Si Heterojunctions
Effect of Neodymium on the Glass-Forming Ability and Magnetic Properties of Fe-Based Bulk Amorphous Alloys
Synthesis Photosical Properties of Silicon-Containing Cross-Linked Polymer
Structure, Magnetoresistance and Electrical Properties of La0.8SrxCa0.2-xMnO3 Compounds
Effect of Pr on Wettability and Mechanical Property of Sn-0.3Ag-0.7Cu Lead-Free Solder
Liquidus and Wettablity of Lead-Free Solder Alloys
Investigation of Ni-Microalloyed Sn-0.5Cu Lead-Free Solders
Phase-Field Simulation for Effect of Annealing Temperature on Oxygen Clusters' Evolution in Silicon Wafer
Chapter 5: New Functional Materials
Fabrication and Characterization of Anti-Microbial and Anti-Ultraviolet Nonwoven by Electrospinning
Investigation of Mid-Infrared Millimeter Wave Radome with Polycrystalline Magnesium Fluoride
Making Thermoelectric Materials SnxGa1 xNx Alloys by Magnetron Sputtering Technology
Orange Peels Derived Activated Carbon as Sulfur Cathode Supporter for Lithium/Sulfur Batteries
Preparation and Performance of Super-Absorbent Resin Using Polyacrylonitrile Fiber Wastes
Research on Mechanical Properties of TiNi Shape Memory Alloy Wires Reinforced Al Matrix Composite Material
Effects of Sr Doping Content on the Structure and Morphologies of La0.7SrxCa0.3-xMnO3
Chapter 6: Polymers, Composites and Compounds
Characterization of Carbon Composites Properties for Application in Sport Industry
Flame-Retardant Properties of Polyester Fabrics Reinforced Phenolic Resin Modified with Silazanes Composites
Preparation of Modified Urea-Formaldehyde/Phosphate Foamed Thermal Insulation Material
Experimental Investigation of Possibilities Vacuum Infusion Technology to Produce Composite Ribs
Evaluation of Different Flame Retardant Combinations for Core/Shell Structured Wood-Plastic Composites by Using a Cone Calorimeter
Research on Pipe Clamps Made of Resin Matrix Composites
Synthesis and Characteristic of Borazine-Silicon-Containing Arylacetylene Resin
Synthesis and Electrochemical Properties of Spherical LiFePO4/C Composite via Spray Drying
Research on Microstructure and Wear Resistance of (Fe,Cr)7C3/Fe Surface Gradient Composite
Synthesis, Characterization and Applications of Late-Transition Metal Branched Polyethylene
The Effect of Pre-Crosslinked CTBN on the Mechanical Properties and Morphology of Epoxy Resin
Microstructure of In Situ Reaction TiB2/Zn-30Al-1Cu Composites Prepared by Spray Deposition Process
Structure and Properties of Hydrolyzed Cyclization-Crosslinking Flame-Retardant Polyacrylonitrile Fiber
Nonisothermal Crystallization Behavior of Poly(vinylidenefluoride)/Polysulfone/Diethylene Glycol Dibenzoate/Dibutyl Phthalate System via Thermally Induced Phase Separation
Study of Conductive and Friction Properties of Grease Containing Carbon Black Additive
Impact Damage Analysis and Experimental Test of Carbon/Epoxy Composite Laminate
Ethanol Pretreatment on Etching of Nylon 6 Films Using Atmospheric Pressure Plasma
Microstructures and Mechanical Properties of Zirconium Dioxide Modified Carbon/Carbon Composites
Microwave Synthesis of the Composites ( -Al2O3+TiB2)/NiAl from Al-TiO-B-Ni System
Microwave Assisted Synthesis of Quercetin-Selective MIPs Grafted on Silica Gel Surface
Synthesis of Ultra-High Molecular Weight Polyacrylonitrile (UHMWPAN) by Aqueous Suspension Polymerization
The Formation and Characterization of Poly (p-phenylene benzobisoxazole) Pulps via Stirred Solutions
Effect of Organoclay Platelets on Crystallization of PTT/EVA-g-MA Blends: Non-Isothermal Melt Crystallization Kinetics
The Preparation of CMC-PVA-AM Dust Suppression Agent and its Application Appraisement
Preparation and Swelling Properties of Organoclay/Super-Absorbent Resin Using Polyacrylonitrile Fiber Wastes
Effect of Radiation Dose on the Creep Properties
Preparation of an Active Packaging Material and its Application on Strawberry Preservation
Slashing and Weaving Properties of Twisted Carbon Fiber Yarns
Preparation and Properties of Kevlar or Polysulfonamide Pulp Reinforced Activated Carbon Fiber Paper
Study on the Mechanical Properties of Carbon Fiber Composite Material of Wood
Mechanical Properties of the PcBN-Alcomposites are Improved by Pressure Infiltration
General Method for Optimizing Composite Patch Repairs
Chapter 7: Surface of Materials, Coatings and Surface Engineering
Improvement in Corrosion and Adhesion Resistance of a Al2O3-CeO2 Nanocomposite Coating on the Aluminum Alloy AA6061 via Surface Pretreatment
Ablation Property of the Plasma Sprayed NiCrAlY-ZrO2 Compound Coating on Stainless Steel Material
Research of Microstructure and Hardness of Co55 and W Coating Made by Laser Cladding
Experimental Study of Nano-Al2O3 Particles Reinforced Fe-Based Composite Coating Made by Laser Cladding
The Effect of Graphite Content on the Wear Behavior of Ni/WC/G Composite Coating
Corrosion of 50%(Ni-22%Cr-10%Al-1%Y)-50%(ZrO2-8%Y2O3) Coatings in Na2SO4 and 75%NaCl-25%Na2SO4 Salts
Research of Rust Layer Stabilization on Bare Steel
Study on Microstructure of the Matrix/Dense Inner Layer Interface in Micro-Arc Oxidizing on Magnesium Alloys
Influence of Oxidation Temperature on the High-Temperature Oxide Film Forming Behavior of T22 Heat-Exchange Tubes
Influence of Passivation Coatings Synthesized by Atomic Layer Deposition on Li-Ion Batteries Cathode Cycle Life
A Effects of Nano-Particles Additives on Wear Performance of Micro-Arc Oxidation Coating Prepared on 2A12 Aluminum Alloy
Study on Microstructure and Fracture Toughness of TaC Ceramic Coating on HT300
Microstructure and Hardness of NbC Coating Produced In Situ
Synthesis and Characterization of CeO2-Al2O3 Nanocomposite Coating on the AA6061 Alloy
Numerical Analysis of the Influence of Graphite Nodule Size on the Pitting Resistance of Austepered Ductile Iron Gears
Early Corrosion Behavior of Pipeline Steel Containing 1% Cr in Sea Water Environment
Investigating the Effect of Hydrophilic Surface Modification on Droplet Evaporation
Experimental Study on Laser Melting of Cemented Carbide Coatings by High Velocity Oxy-Fuel Spraying
Chapter 8: Biomaterials, Biotechnology and Biochemistry
Conjugation, Identification and Bionomics Analysis of EGFR Targeting Drug TGF -Saporin as a Bioactive Stent Coating Material
Molecular Mechanism on Inhibition of MB Angiogenesis by Curcumin Blocking the Wnt/ -Catenin and NF- B Signaling Pathway and Inhibiting the Expression of VEGFs/VEGFRs
Mechanisms of Plant Polyphenol Genistein on Regulation of EMT in Ovarian Carcinoma
Fabrication of Eprinomectin-Loaded PLGA Microspheres and their In Vitro Veterinary Release Profiles
Influence of Rotation Rate of Collecting Roller on the Mechanical Property of PCL/SF Tubular Scaffolds
Plant Compound Curcumin Mediates Calcineurin Activity to Upregulate ABCA1 Expression in a Model of Alzheimer's Disease
Influence of Hydrodynamic Cavitation on the Viscosity of Raw Sugar Solution
Application Research of Lipid Microsphere Biological Carrier Material on Prescription of Tanshinone II a Lipid Microsphere by Central Composite Design-Response Surface Method
Effects and Comparison of Curcumin on Morphology Changes of Chronic Cerebral Hypoperfusion in Young and Aged Rats
The Progress in Cloning, Expression and Purification of Cholinesterase in Pichia pastoris: One Kind of Biomaterial for the Detection of Residual Insecticide Contamination
Effects of Plant Compound Curcumin on Learning and Memory of Chronic Cerebral Hypoperfusion Rats
Production, Characterization and Bioactivity of 46S6 Bioactive Glass from Rice Hull Ash Silica
Study of Endocrine Disruptors in the Sediment of a South Brazilian River
Preparation and Characterization of Radiopaque Calcium Alginate Microspheres Embedded Silver Nanoparticles
Study on Preparation Technology Optimization of Sultamicillin Tosilate- -Cyclodextrin
Microbial Transformation of Glycyrrhetinic Acid by Colletotrichum lini AS3.4486
Preparation of Aspirin- -Cyclodextrin Inclusion Complex by Grinding Method
Adsorption and Dehydration of Water Molecules from , and Cyclodextrins - A Study by TGA Analysis and Gravimetry
Production of Cellulase by Aspergillus niger FC-1 and its Application in Hydrolysis of Corncob Residues
Lycopene Nanoparticles Coated with Microemulsions to Improve Stability
Synthesis of Hybrid Fe3O4-Silica-M(Zn, Cu, Ni) Submicrospheres and its Application for Adsorption on Bovine Hemoglobin
Synthesize of Carboxymethyl Chitosan-Graft-Polycaprolactone (CMCS-g-PCL) and the Preparation of Micelles
Characterization and Study on In Vitro Release of Praziquantel from Poly(lactide-co-glycolide) Implants
Antioxidant Properties of Extracts from Curcuma zedoaria Rhizome
The Influence of Replant Stress on Hormone and Absorption of Root for Different Apple Rootstocks
Finite Element Simulation of Pore Morphology and Stress Distribution of Porous Titanium
Chapter 9: Metals and Alloys in Industrial Applications
Effect of Mn on the Microstructure and Hardness of Gear Steel Treated by Quenching and Partitioning Process
Analysis and Research on Different Thermal Conditions of Copper Bar
Hot Deformation Behavior of Nano-Precipitation Strengthening Steel
Effect of the Cooling Time in Annealing at 350 DegreesC on the Phase Transformation Temperatures of a Ni55Ti45 wt. Alloy
Magnetic Field Effect on Creep of Polycrystalline Copper
Evaluation on Interface Bonding of Thin Aluminum Clad Steel Strip
Sliding Wear Behavior of AM60 Alloys with Alloyed Yttrium
Influence of Quench and Tempering Temperature on the Microstructure and Properties of 20SiMn2MoVA Steel
Effect of Grain Refiner C2Cl6 on Tensile Properties of Squeeze Cast Mg Alloy AM60
The Transformation of Martensite and Analysis of its Microstructure and Properties in Carbon Steel
Interface Characterization of Bimetallic Casting with a 304 Stainless Steel Surface Layer and a Gray Cast Iron Base
Effect of Inclusion on Pitting Corrosion of X80 Pipeline Steel
Microstructure, Texture and Property of Interstitial-Free (IF) Steel after Ultra-Fast Annealing
Experimental Study of the Fatigue Crack Propagation and Overloading Retardation in TA2 Plate
Effect of Cold Deformation on Precipitation of 7050 Aluminum Alloy during Aging Process
Properties and Microstructure of an Al-Zn-Mg-Cu Alloy Forging
Failure Analysis of a 304 Stainless Steel Flange
The Electrochemical Study on Corrosion of Heat Affected Zone of Stainless Steel Weldment in Seawater under Different Welding Procedures
Investigation on the Corrosion Behavior of Cast and Extrude AZ61 Mg Alloys in NaCl Atmosphere at High Temperature and Pressure
Modeling of Non-Isothermal Ferrite Transformation in Fe-C-Mn-Si Alloys
Effect of Pass Deformation on the Microstructure and Properties of Aluminum Alloy Anodes for Fuel Cell Application
Mechanical and Corrosion Behaviors of the Casting Al-Cu Alloy Modified by Nano-Scale PrxOy and LaxOy
The Influence of Different Gas Welding Flame on Corrosion Behavior of the Carbon Steel's Heat Affected Zone in Seawater
Effect of Heat Treatment on the Resistivity and Mechanical Property of Low-Pressure Semi-Solid Die Cast Aluminum Alloy Wheel
Study of Micro-Abrasive Wear Resistance of Heat Treated NiTi Alloys
Corrosion and Protection of Magnesium Alloys
The Fatigue Crack Propagation of Al-Mg-Mn-Zr Alloy with Erbium
Study on the Thermal Field Distribution of Steel Claws for Anode in Aluminium Electrolysis Cell
Research on Mechanical Properties of Micro-Electroforming Ni
Compatibility between the Molten Mg-25Al-15Zn-14Cu Alloy and Stainless Steel for Phase-Transformation Thermal Storage Facility
Study on the Microstructure and Storage Heat Performance of Mg-25Al-15Zn-xCu Alloys
Relationship of Microstructure and Mechanical Properties in Er-Containing Aluminum Alloy
Influence of Tempertature on Corrosion Behavior of DH36 Steel in Seawater Full Immersion Zone
Effects of Rotating Magnetic Field on Microstructure and Properties of Bi-Containing Hypereutectic Al-Si Alloy
Dynamic Compressive Behavior and Damage Mechanism of Magnesium Alloy
Numerical Simulation of Concentration Field for Be/00Cr17Ni14Mo2 Stainless Steel by Diffusion Bonding
In Situ X-Ray Diffraction during Casting: Study of Hot Tearing in Al-Zn Alloys
Chapter 10: Materials Processing Technologies
Prediction of Chip Morphology and Formation in High Speed Milling of Hardened Steels
Numerical Simulation Analysis for Padding Assisted Roll-Bending Process
Fluidity of Plastic Blends with a Recycled Filler
Improvement of PA6 Mechanical Properties by Radiation Cross-Linking
Strength of Bonded Joints of Polypropylene after Radiation Cross-Linking
Study of Charpy Impact Properties of PC with Different Amount of Recycled Material and Temperatures
Micro-Indentation Test of Cross-Linking Polyethylene
Irradiation of Polyamide Measured by Micro-Indentation Test
Thermo-Mechanical Properties and Tensile Behaviour of Modified HDPE by Beta Rays after Temperature Load at 220 DegreesC
Mechanical Behavior of the Cr3C2 Compound at High Pressure and High Temperature
Influence of Technological Parameters on Material Flow
Micromechanical Properties of Thermoplastic Elastomer (TPE-E)
Research on Law and Mechanism of Hydrogen Induced Softening in Ti6Al4V Alloy in the Temperature Range 400 DegreesC to 1010 DegreesC
Study on the Annealing Process of a Cu-Zn-Al-Ni Alloy
Study on the High Shear Degassing Process with Water Simulation
Electromagnetic Micro-Punching Process of T2 Copper Foil
Research on the Temperature Changes of 20CrNiMoH Steel during Turning Process
Research on Manufacturing the Metal Foams with Regular Cells by 3D Printing
Experimental Studies of Submicron Polycrystalline Diamond without Binder under High Pressure and Temperature
Analysis on the Optimal Process of Aluminum Profile Extrusion with Two-Hole Dies
Experimental Investigations on Cylindrical Grinding Temperature of Silicon Carbide
Evaluation of Deep Criogenic Treatment at Microabrasive Wear of Aisi D2 Steel
Research of Cold Extrusion Process for the 2A12 Duralumin Pistons
Studying of Microstructure and Properties of Selective Laser Melted Titanium-Based Alloy
Research on the Elimination of Banded Structure in SAE8620H Gear Steel
Study on Optimization Design of VSR Parameter for Large Welded Components
Microstructure and Properties of TA1 TIG Joint via Micro-Arc Oxidation
Prediction of Microstructure and Mechanical Properties of Weld Metal in Hybrid Laser-Arc Welding
Influence of Machining Parameters of the Drilling Polymers UHMW-PE and PTFE
Impact on the Reduction Process of Carbon Containing Pellets with Biomass Replacing Traditional Reducing Agent
Features and Application of Electron Beam Welding Technology
The Analysis and Improvement of the Influence Factors for the Fabrication of SMT Template and Laser Cutting Technique
Influence of Particle Size of Wheat Powder on Roller Wear Properties
An Experiment Study on Squeeze Test and Flow Behavior Analysis of Concentrated Carbon Black Suspension
Development of a Copper Heat Pipe with Axial Grooves Manufactured Using Wire Electrical Discharge Machining (Wire-EDM)
Development of CNC Five-Axis Turning Tool Cutter Grinder
Chapter 11: Engineering of Technological Processes
The Effect of External Voltage on Pulsed Electrohydrodynamic Printing
Investigation of the Motion of Materials in Cross Section of a Specific Rotary Cooler
Determination of Gold in Gold Jewelry Alloys by a Synthesis Method
The Influence of Material Properties on the Hydrodynamic Performance of Propeller
Research on the Multi-Actuator and Sensor Detecting Technology Based on Piezoelectric Composite Materials
Experimental Analysis of a Vapor Chamber Applied to Thermal Management of Microelectronics
Analysis on Influencing Factors of Bus Bar Contact Resistance
The Study on Porous Media Phase Change Coupling Heat Transfer Model in Enclosed Metal Cavity
Signal Detection of Welding Joint Flaw Based on Wavelet-Support Vector Machine
Boundary Element Analysis for Piezoelectric Cracks by an Interaction Integral
Determination of Trace Copper in Vanadium Alloy by Flame Atomic Absorption Spectrometry
Numerical Analysis on Decay Heat Power of Weapon-Grade Plutonium
New Materials Applied for the Stationary Phases in View of the Optimized HPLC and UHPLC Column Classification System Used in the Pharmaceutical Analysis
Mechanical Properties and Fracture Analysis of a Plant Oil Storage Tank Accident
Experimental Verification of a Stochastic Fatigue Crack Growth Model
Size Effect Mechanism on Foil Rolling Analyzed by Crystal Plasticity Finite Element Method
A Computer-Aided-Design (CAD) System for Four-Step Three-Dimensional Braiding
Using Simulated Data to Support the Calibration Process of ED-XRF Analysis
Method of Lines to Solve the Linear Temperature Field of LENS
Chapter 12: Building Materials and Technologies in Construction
The Preparation of a Kind of Interface Treatment Agent for Concrete
Stress Non-Uniformity Simulation Analysis of Prestressed Steel Strands in Curved Duct
Comparison of Various Techniques for Flexural Strengthening of Thin Concrete Members Using Continuous Carbon Fibers
Studies of High Temperature Performance of Asphalt Based on Repeated Creep and Recovery Test
Spall Strength of Steel Fiber Reinforced Concretes
Numerical Test Research on High-Strength Concrete Square Columns with High-Strength Aseismic Transverse Reinforcement under Concentric Compression
Seismic Performance of Natural Fibre Reinforced Polymer-Concrete Bridge Piers
Experimental Study on the Material and Environmental Property of Ancient Adobe Brick
Performance of Ultra-High Strength Concrete Containing Different Types of Fibers
Load Transfer Behavior of Cracking for Cement Concrete Pavement
Interface Bonding Property Finite Element Simulation of Mo Fiber-Reinforced Polymer Concrete
The Research on Bond Property of Rubber Concrete
Centre of Panel Thermal Conductivity Performance Analysis of Aerocor-Centrifugal Hybrid Ultrafine Glass Fiber VIP Core Materials
Mechanical Properties of Semi-Rigid Steel Frame-Braced Steel Plate Shear Wall
Seismic Behavior of Steel Plate Shear Walls-Steel Frame
by "Nielsen BookData"
