Advanced architectural design and construction : special topic volume with invited peer reviewed papers only
Author(s)
Bibliographic Information
Advanced architectural design and construction : special topic volume with invited peer reviewed papers only
（Applied mechanics and materials, v. 820）
Trans Tech Publications, c2016
- : pbk
Available at / 1 libraries
-
No Libraries matched.
- Remove all filters.
Note
Includes bibliographical references and indexes
"CD issued in 2015"--T.p. verso
Description and Table of Contents
Description
Development of the material-technological base in the field of architecture and construction is progressing faster than in the previous periods. Based on the potential of new materials and technologies, it is possible to create advanced architecture and engineering building systems. Integration of advanced materials, technologies and construction systems creates a high-quality architectural construction with optimum performance in the presence as well as in the future. Nevertheless, improper application of high quality materials in the wrong environment may cause a defect.
Table of Contents
Preface & Editorial Board
Chapter 1: Architectural Design
Performance-Based Generative Design and Fabrication
Mixed Reality in Architecture
Selected Aspects of Slovac Republic Territorial Development Visions
The Progressive Constructions in the Work of Architects of the Classical Modernism, Slovakia 1919-1939
Window Today - Still an Important Architectural Element of Exterior and Interior
The Process of Hybridization in Sustainable Urban Residential Environment
Load Bearing Structures of Glass Single-Storey Buildings
The Design Principle Cladding of Internal and External Walls and the Architectural Design Analysis
Requirements and Solution of Barrier-Free Measures upon Architectonic - Construction Solution of Kitchen and Bathroom in a Flat of Special Determination
Proposal of Architectonic - Construction Solution of Barrier-Free Measures of Entry Premises in Non-Residential Buildings Specified for Use by the Public
Drainage Systems for Sloping Roofs and Possibilities of Rain Water Use
Reflection on Modernization of Historic Religious Architecture - Case Study: The Roman Catholic Parish Church, Rajec in Slovakia
Glass Fibre Reinforced Concrete Products for Construction Industry and Architecture
Geometric Tolerance Verification - Innovative Evaluation of Facade Surface Flatness Using TLS (Terrestrial Laser Scanning)
Adaptation of the Ruin of Outbuilding next to Classicist Manor-House in Opatova - Luc enec
The Optimization of Mechanized Earthwork Processes
Chapter 2: Energy Saving, Thermal Insulation and Ecological Buildings
Strategy for Cooling Green Buildings
External Climatic Conditions and Thermal-Humidity Internal Parameters Changes in Working Environment of Production Building
The Impact of the Dynamic External Shading Structure on the Energy Balance of the Reference Building in Summer
BIM and Prediction of Thermal Stability in Underroof Spaces
Analysis of the Influence of Thermal Characteristics of Simple Family House on Heat Use for Heating
Thermal Bridges Impact on Energy Need for Heating in Low Energy Wooden House
Balcony Systems (Isokorb) Impact on Energy Need for Heating and Economic Valuation
Earth Wall Heat Storage Impact on Indoor Air and Surface Temperature during an Extreme Summer Week
Impact of Composition of Exterior Wall on the Temperature in the Room
Selection of Material Base of External Wall in Term of Thermal Performance
The most Significant Factor Affecting the Calculation of Specific Heat Consumption for Heating for Family Houses According to STN 73 0540
Optimal Localisation of Window in External Wall of Different Material and Construction Design Considering Linear Loss Coefficient
New Calculation Method for Determination of the Influence of Thermal Bridges on a Building
Impact of Growing Conditions of Spruce Wood on Thermal Performance of Windows
Sustainability of ETICS Maintenance Technologies
The Methodology for the Selection of Technologies for the Removal of Microorganisms from ETICS
Systems of Sensible Thermal Energy Storage
Theoretical Calculation of Thermal Transmittance
Preliminary Proposal of a Shading System Composed of Photovoltaic Modules and Phase Change Material
Methods to Reduce the Operating Temperature of Photovoltaic Cells
An Optimal Window Position in External Walls, of Different Materials and Construction Designs, in Relation to Critical Surface Temperature
Window Structures in Building with Historical Building Preservation
Triple or Quadruple Glazing?
Thermotechnical Properties of Unburnt Clay Wall in Historical Family House and Wall Reconstruction
The Algorithm of the Double-Skin Facade without the Effects of Wind
Measurement of Lightweight Experimental Wall and Comparison with Different Simulation Programs
Chapter 3: Hygrothermal Performance of Building Materials and Constructions
Hygrothermal Initial Conditions - Case Studies
Physical Analysis of Water Vapour in Function Gap
Condensation of Water Vapour in the Functional Gap of Window - Experimental Measurement of Exfiltration at 15 Pa
Condensation on the Exterior Surface of Glass System
Analysis and Evaluation of Moisture Factor, Reliability, Effectivity and Durability of Sanation Methods Used to Treat Damp Masonry
Quality of Vapour-Proof Layer Concept in Roof Envelope in Residential Attics
Chapter 4: Aerodynamic Characteristics of Buildings and Constructions
Interaction of Building Thermal Technics with Building Aerodynamics in Problem Solving of Physical Cavities of Double-Skin Transparent Facades
The Impact of Relative Position of the High-Rise Buildings on the Wind Flow
Impact Wind Turbines Implementation in Municipalities in the Context of Sustainable Urbanism with Focus on Dynamic Pedestrian Comfort
Experimental Pressure Measurement on Elliptic Cylinder
Atmospheric Boundary Layer
Engineering Standards of Wind
Atmospheric Boundary Layer Modelling
Development of Boundary Layer in CRIACIV in Florence (Prato) and Comparison with CFD
Influence of the Wind in Passages
Comparison of Pressure Coefficients of Cube Silsoe with the Results in the Wind Tunnel of Faculty of Civil Engineering in Bratislava
Chapter 5: Fire Protection of Buildings and Constructions
Determination of Fire Resistance of Ceiling Structure Variant Design on the Basis of Timber Using Numerical Calculation Methods
Fire Safety of Buildings in the Protection Zone of the Electric Power Transmission System of the Czech Republic
Water Supply for Cooling Tertiary Containments for High Storage Tanks
Comparison of Requirements in Slovak and Selected Foreign Legislation on the Issue of Safe Distance of the Wooden Building Structures from the Flue
Escape Route Typology
Chapter 6: Daylighting and Insolation
Inaccuracies Caused by Non-Uniform Luminance Distribution of Artificial Sky Dome at Scale Model Measurements
Daylighting for Buildings: Influence of the Solar Eclipse on its Spectral Characteristics
Chapter 7: Acoustics and Noise Protection
Solution of Own Window Pane Oscillation by Subspace Iteration Method
Laboratory Experimental Verification of the Effectiveness of Acoustical Treatment of Facade Element Frame Profiles
Theoretical Determination of Sound Reduction Index of Simple Walls on Various Material Bases
Modification of Watters' Formula for Simple Aerated Concrete Walls
The Use of Simulation Tools in the Assessment of External Stationary Sources in Terms of Noise
The Results of Experimental Measurements of the Effects of Floating Floor Washers
The Effect of a Front Frame on the Increase in Sound Insulation of an Acoustically Simple Wall - Results of On-Site Measurements
Experimental Measurements of Effects of Occupancy Class on Reverberation Time
Effects of the Sound Insulation of the Outer Structure on the Price
by "Nielsen BookData"
