Applied methods of the analysis of static and dynamic loads of structures and machines II : selected, peer reviewed papers from the 53rd International Conference on Experimental Stress Analyses [sic] 2015 (EAN 2015), June 1-4, 2015, C̆eský Krumlov, Czech Republic
著者
書誌事項
Applied methods of the analysis of static and dynamic loads of structures and machines II : selected, peer reviewed papers from the 53rd International Conference on Experimental Stress Analyses [sic] 2015 (EAN 2015), June 1-4, 2015, C̆eský Krumlov, Czech Republic
（Applied mechanics and materials, v. 827）
Trans Tech Publications, c2016
- : pbk
大学図書館所蔵 件 / 全1件
-
該当する所蔵館はありません
- すべての絞り込み条件を解除する
注記
Includes bibliographical references and indexes
内容説明・目次
内容説明
The objective of the conference was getting acquainted with the present state, exchange of experience, entering into and strengthening mutual relations of researchers from universities, plants and scientific and research institutions in the field of experimental stress analysis and numerical modelling in mechanical and civil engineering. Between the topics of the conference were:
Development of experimental methods in mechanics.
Development of experimental methods in biomechanics.
New methods and applications of deformation and stress analysis in mechanical engineering equipment.
New methods and applications of deformation and stress analysis in building and other structures.
Experiment as a tool for the verification of analytical and numerical methods.
Experimental research and prediction of strength, life and operational reliability of structures and devices.
Monitoring of operational loadings and operational states of structures and devices.
Methods and means of teaching experimental methods.
目次
Preface, Conference Scientific Committee, Organizing Committee
Chapter 1: Materials and Structures in Mechanical Engineering
Sandwich Roof of the Bus - Fatigue and Strength Tests
Application of Indentation Method for Quality Control of Processing of Ceramic Details
Impacted Object Kinematic
Measuring Device for the Cutting Parameters Monitoring during Drilling
Environmental Conditions Effect for Adhesive Connections in Glass Structures
Clinched Joint Tensile Test
Influence of Coating on the Poisson's Ratio of Woven Fabrics
Non-Destructive Measurement of Plastic Deformation under the Extreme Environments
Experimental Verification of Vibration Reduction of the Steel Platform for Two Limestone Sorters
Solid Particle Erosion of Selected HVOF Sprayed Coatings
Testing of Space Frames Made of Composite Materials
CFRP Fuselage Panel Behavior Monitoring Using Fibre Optic and Resistance Sensors and Optical Contactless Measurements
Experimental Analysis of Planetary Transmission Load Sharing
An Experimental Analysis of Bending Behavior of Sandwich Constructions for Transport Industry
3-D ESPI Measurements Applied to Selected Engineering Problems
Optical Investigation of Component Made by FDM Technology
Experimental and Numerical Analysis of Stress and Stick-Slip Effect of the Test Stand
Dynamic Pressure Measurement and Uncertainty Analysis Using a Piezoelectric Transducer for a Combustion Engine
Long-Term Measuring of Loadings in a Real Operation of Structures
Torsional Characteristics Measurement of a Gearbox
Enhanced Frequency Response Function Technique as Tool for Mode Separation in Experimental Modal Analysis
Testing Equipment Location on Springing Base Plate
Experimental Analysis and Optimization of Vibrations of a Clamping Device by Using Hyperelastic Elements
Hydraulic Exciter Control for Shock and Vibration Testing
Verification of the Geometric Parameters of the Ring-Core Method
X-Ray Diffraction and Barkhausen Noise Diagnostics of Thick Welds Prepared by Metal Active Gas and Laser Welding
Inverse Hole-Drilling Method for Residual Stress Investigation
Residual Fatigue Lives of Steam Turbine Blades
Residual Stress Analysis of Austenitic Steel Designed for Nuclear Energetics in Surface Layers
Shear Properties and Modulus of 3D Glass Fibre Reinforced Polyester Thermoformed Composite
Demoulding of Tires from Segmented Mould
Numerical Model of the Static Loading of a Stitched Seam in the Composite Cover of Car Seat
Analysis of Mechanical and Impact Properties of Prepreg Composites under Elevated Temperature
Low Velocity Impact on Fiber Reinforced Geocomposites
Strength Determination of Composite Flexible Joint
Experimental Analysis and Study of the Shock Absorption of Carbon Composite
Bond Joint Analysis of Thermoplastic Composite Made from Stacked Tailored Blanks
Strain and Deformation of Fialt 500 L Tailgate Made from Thermoformed Polyester Composite in Comparison with Steel
Applications of Multi-Level Method of Stress-Strain State Analysis in Ceramic Tools Design
Localized Corrosion in Alloy Steel of Steam Turbines
Computer Aided Evaluation of the Stress Tensor in the Two-Dimensional Photoelasticity
The Environment Influence on Bladed Steel during Operational Conditions
Effect of Thermal Loading on Stresses in Defective Surface Layer of Ceramics
Load Capacity of Dynamically Loaded Gears with Different Case-Hardened Depth
Plastic Behavior of Steam Turbine Low Pressure Part
Mechanical Concepts for Simulation of Nonlinear Attachment of Engine on Aeroelastic Demonstrator
Nonlinearity in Oscillations of Large Displacement Pendulum
Chapter 2: Building Structures and Materials
Impact of Increased Temperature on Cohesiveness of Textile Glass Reinforcement with UHPC Matrix
Volumetric Changes of the UHPC Matrix and its Determination
Stability of Glass Structural Elements Subjected to Bending
Influence of Compressed Area on Capacity of Headed Studs Used as Wall/Slab Reinforcement
Investigation of Bending Capacity of Concrete Elements Strengthened by Textile Reinforced Concrete
Pulse Method Used for Non-Destructive Assessment of Glued Laminated Timber Beams
CFRP Strengthening of Damaged Stone Masonry Column
Testing of 3-Dimensional Stabilizing Elements for Protection of Slopes: Possibilities of In Situ Testing
Creep of GLT Beams during Four-Point Bending Test
Clay Building Materials and their Properties
Creep of the Four Month Old Cement Paste with Content of Fly Ash
The Development of the Fine-Aggregate Concrete Strength with Recycled Cement Powder
Experimental Verification of Demountable Precast Column System
Assessment of Serviceability of the Footbridge Across Opatovska Street
Study of the Mechanical Properties Development of Concrete Containing Fine Recycled Aggregate
The Experimental Determination of One-Axial Tensile Strength of the Textile Reinforced Concrete
Study of Fine-Grained Composites Exposed to Sulfuric Acid and Sodium Sulfate
Non-Linear Numerical Analysis of Unreinforced Masonry Column and Masonry Column Reinforced by FRP Wrapping
Critical Force Analysis of Thin-Walled Symmetrical Open-Section Beams
Components of Fracture Response of Steel Fibre Reinforced Concrete Specimens
Compressive Strength of Lime-Based Mortars Reinforced by Micro Glass Fibers
Destructive and Nondestructive Evaluation of Frost Resistance of Cement Pastes with Fly Ash
Evaluation of the Railway Substructure in the Turnout with the Movable Frog by Help of Decomposition
Detection of Cracks on Small Specimens Based on Modal Analysis
An Experimental Analysis of the Real Dynamic Behavior and the Reliability Verification of an Existing Footbridge
An Experimental Analysis of Grandstand Vibrations Caused by Crowd of Spectators during Two Football Matches
Use of Materials with Pozzolanic Properties as Partial Cement Replacement in Development of Heat Resistant Composite
Composite Middle Lamella Hardness and Young's Modulus of Artificial Dried Spruce Wood by Nanoindentation
Mechanical and Durability Properties of Selected Types of Sandstones
Measurement of Volume Changes of High Performance Cement Based Composites
Cement Composite Reinforced with Synthetic Fibers: Comparison of Three-Point and Four-Point Bending Test Results
Use of Open Source DIC Tools for Analysis of Multiple Cracking in Fiber-Reinforced Concrete
The Identification of Cracks Formed during the Spontaneous Drying and Hardening of Alkali-Activated Slag for Different Curing Times
Optical Fiber Sensor for Timber Structure Monitoring
Effect of Reinforcement on Flexural Strength and Ductility of Gypsum-Based Composites with Recycled Wires from Automobile Tires
Identification of Glass Alloy Elastic Constants Using Rod Samples
Chapter 3: Biomechanics and Biomaterials
Locking Compression Plate for Distal Tibia Fractures
Micromechanical Analysis of Dental Implants and their Surface Modification
Influence of Dental Caries for Dental Materials and their Micromechanical Properties
Measurement of the Temperature and Pressure Characteristics of the Car Seats - Relationship between Humans
The Simulation of Collision of Standing Passenger with Rigid and Deformable Floor
Inflation Test of Developed Biological Composite Reinforced by Polyester Mesh
「Nielsen BookData」 より
