Advanced engineering technology II : selected, peer reviewed papers from the 2nd International Conference on Advanced Engineering and Technology (ICAET 2015), December 11-13, 2015, Incheon, South Korea

著者

• International Conference on Advanced Engineering and Technology
• Hu, Jong Wan

書誌事項

Advanced engineering technology II : selected, peer reviewed papers from the 2nd International Conference on Advanced Engineering and Technology (ICAET 2015), December 11-13, 2015, Incheon, South Korea

edited by Jongwan Hu

（Applied mechanics and materials, v. 835）

Trans Tech Publications, c2016

• : pbk

注記

Includes bibliographical references and indexes

内容説明・目次

内容説明

The 2nd International Conference on Advanced Engineering and Technology (ICAET 2015) would take place in Incheon, South Korea, December 11-13, 2015. This conference is sponsored by Incheon Disaster Prevention Research Center (IDPRC) in INU. The ICAET 2015 is an annual international conference aimed at presenting current research being carried out in the fields of materials, structures and mechanical engineering. The idea of the conference is for the scientists, scholars, engineers and students from universities, research institutes and industries all around the world to present on-going research activities. This allows for the free exchange of ideas and challenges among the conference participants and encourages future collaboration between members of these groups. The conference will also foster cooperation among organizations and researchers involved in the merging fields and will provide in-depth technical presentations with abundant opportunities for individual discussions with the presenters.

目次

Preface, Committee Chapter 1: Nanomaterials, Nanotechnologies and Semiconductors Silica Rice Husk Supported Ag/ZnO Nanoparticles for an Improved Visible-Light Photocatalytic of Methylene Blue Borosilicate Frit Addition Impact on the Structure and Electric Behavior of ZnO Nanoparticle-Based Varistors Plugging Agent of Shale Base on Nano Flexible Polymer Dielectric Study of Electron Capture Centers in Sillenite Crystals Bi12SiO20 Self-Cleaning and Antibacterial Properties of Paint Containing ZnO and WO3 Co-Doped VO2 Thermochromic Nano-Pigment Synthesis of h-MoO3 and (NH4)2Mo4O13 Using Precipitation Method at Various pH Values and their Photochromic Properties The Effects of Bagasse Fiber Loading on the Mechanical Properties of Skim NR-Clay Nanocomposites UV-Blocking Property of Nano-ZnO Thin Film Coating on Silk Fabric Chapter 2: Biomedical Engineering and Biotechnologies Choosing the Right Antioxidant Supplement for Protecting Liver from Toxicity of Engineered Nanoparticles : A Comprehensive In Vitro Screening Fabrication of Ascorbic Acid Biosensor Based on Coupling Polyethylene Glycol Modified Silk Fibroin Membrane onto Glassy Carbon Electrode Biocompatible Cardiac Sensor with Continuous Arrhythmia Monitoring for Human Wellness Low Temperature Preparation of Thiocarbamide Doped TiO2 Film on Stainless Steel and its Antibacterial Efficiency against Staphylococcus aureus Boron Compounds Counteracts Oxidative Stress Mediated Genotoxicity Induced by Fe3O4 Nanoparticles In Vitro Influence of the Veneering Thickness on Stresses in All-Ceramic Crowns Biomechanical Behavior of All-Ceramic Crowns with Variable Thicknesses of Zirconia Frameworks Technology Optimization on Preparation of Peanut Antioxidant Peptides by Bacillus Subtilis Solid State Fermentation Method Binding Affinity Analysis of Aptamer Targeted to Live Bacterial Cells Chapter 3: Applied Electrochemistry Electrochemical Investigation of the Effects of Acid Concentration and Dissolved Oxygen on the Corrosion Behavior of Austenitic Low-Nickel Stainless Steels in Citric Acid Effects of Organic Additives on Electrochemical Properties of SiOx Electrodes in Lithium Secondary Batteries Electrochemical Properties of NbO as a Negative Electrode Material for Lithium Secondary Batteries Comparative Study of the Corrosion Behavior of Low-Nickel AISI 202 and Conventional AISI 304 Stainless Steels in Citric Acid Using Electrochemical Techniques Chapter 4: Materials and Processing Technologies in Mechanical Engineering Preliminary Study of Ultrasonic Assisted Underwater Laser Micromachining of Silicon Bubble Formation in the Underwater Laser Ablation of Silicon Tool's Edges Fragmentation at Gear Hobs - A Method to Reduce Cutting Vibrations Recovery of Aluminum Alloy A380 from Machining Chips Effect of Activating Flux on the A356 and 6061 Aluminum Alloy GMA Welds Effects of Root Opening on Physical and Mechanical Properties of the Double Side Welded of Ship Materials Porosity Defects Induced by Semi-Solid Isothermal Heat Treatment in Cast Hypereutectic Al-18% Si Alloy Modification Behavior and Microstructure Evolution during Solution Heat Treatment of A356 Alloys with Al2Ca and Excess Mg Influence of Alloying Elements in ZnAl5 Based Alloys on Melting Temperature, Tensile Strength and Vickers Hardness Tensile Properties and Microstructure of Friction Stir Welded Joints 2195-T8 Aluminum Alloy Primary Radiation Damage of BCC Iron under Uniaxial and Hydrostatic Stress: MD Simulation Improvement in Plastic Strain Ratio of AA1050 Al Alloy Sheet by Enhancing the <111>//ND Texture Component Influence of Friction Stir Welding Parameters on the Mechanical Properties of EN AW-7075 Weld Joints Effects of Strain-Rate and Deformation Mode on Strain-Induced Martensite Transformation of AISI 304L Steel Sheet Effects of Cu Addition on the Precipitation Process of Al-9Zn-4Mg-xCu (wt. %) Alloys at 130 DegreesC Experimental Analysis of Forming Limits and Thickness Strains of DP600-800 Steels Modeling and Optimization for Multiple Criteria of Hole Quality in Hardened Steel Drilling Modeling of Cut Depth and Surface Analyses of Silicon Wafer in Laser Micromachining Process Resistance Spot Welding Process Optimization Using Taguchi Robust Method for Joining Dissimilar Material An Analysis on Finding the Optimum Die Angle of Polylactic Acid in Fused Deposition Modelling Calorimetric and Thermodynamic Studies of Complex Ferrites Chapter 5: Chemical Materials and Chemical Technologies Effect of Cationization Conditions on Dyeing Properties of Hemp Fabric with Natural Dye Extracted from Arabica Coffee Ground Crystallinity, Tapping and Bulk Density of Microcrystalline Cellulose (MCC) Isolated from Rice Husk (RH) Phase Morphology, Mechanical and Thermal Properties of Poly (Trimethylene Terephthalate) and Poly (Ethylene Terephthalate) Blends Morphology and Mechanical Properties of Poly (Lactic Acid) and Acrylonitrile-Butadiene Rubber Blends with Organoclay Fabrication and Characterization of Porous Activated Carbon from Coconut Shell by Using Microwave-Induced KOH Activation Technique Isoconversional Methods for Kinetic Modeling of Kerogen Pyrolysis Using TG Data First Principles Density Functional Theory Investigation on the Structural, Energetic and Electronic Properties of 6-Bromo-4-Oxo-4H-Chromene-3-Carbaldehyde Detailed Modelling of Hydrocarbonaceous Media Separation Process Chapter 6: Technologies of Environmental Engineering, Health and Safety and Waste Utilization Xylol and Glutaraldehyde Replacement at a University Hospital and a Laboratory of Human Anatomy Natural Materials to Absorb Water from Environment The Establishment of Real-Time PCR Detection System of Aspergillus Niger in Peanut The Anti-Aspergillus Flavus Activity of Composite Coating Using Lemon Aldehyde and Chitosan Copper Removal with Biologcal Treatment Aided with Modified Adsorbents Preparation and Metal Removal from Chitosan/PEG Blend Multi-Cycle Photodegradation of Anionic and Cationic Dyes by New TiO2/DSAT Immobilization System Enhanced Photocatalytic Degradation of Fulvic Acid Using N-Doped SnO2/TiO2 Thin Film Coated Glass Fibers under UV and Solar Light Irradiation for Drinking Water Purification The Effect of Reactive Red 4 Dye as a Sensitizer in Enhancing Photocatalytic Activity of TiO2 for Degradation of Methyl Orange Nitrogen Doped TiO2 Prepared under Microwave Irradiation: Effect of Different Irradiation Light Sorption of Copper and Zinc from Aqueous Solutions by Microwave Incinerated Sugarcane Bagasse Ash (MISCBA) Computational Fluid Dynamics Modelling of Photoelectrocatalytic Reactors for the Degradation of Formic Acid Chapter 7: Architecture, Building Materials and Construction Technologies Ageing Documentation of Hydrophilic Mineral Wool Used in Green Roof Assemblies Optimum Blend Ratio of Tropical Soil and Porcelain Tile Residue to Highway Applications Based on Statistical Analysis of the Results of Unconfined Compression Tests A Study on Indoor Thermal Improvement of Container for Low Income Housing in Jakarta Thermal Performance Comparison between Single and Double Storey Terrace Houses in Melaka, Malaysia Study on Green Vertical Housing Using Hybrid Ventilation System Based on Air Changes per Hour Factor The Virtualisation Process of the Joglo Cultural Heritage House Using Computer Aided Design Experimental Evaluation of Residual Stresses in the Concrete Soil Stresses on Carbon Steel Pipe Undergoing Uplift Experimental Assessment of the Influence of Wind Speed on the Airflow and Temperatures in the Open Joint Ventilated Fac ade Cavity Effect of Aggregate Size on Punching Strength of Reinforced Concrete Slabs Comparing the Effectiveness of Friction Damper and Tuned Mass Damper Using Numerical Simulation Research on Seismic Performance of Framed Shear Wall Structure Economic Comparison of Fire Fighting Measures of Gypsum-Based Materials Thermal Technical Failures of Critical Construction Details Pavement Design Reinforced Base Researches Calculation of the Pavement Reinforced Design Using Model of Multilayered Plate on the Elastic Base The Future of Architecture in Modular Construction Influence of the Type of the Fiber Component of the Stabilizing Additive for Stone Mastic Asphalt Concrete on the Structure of an Organic Binder Evaluation of Measurement in Crawl Space of Wooden House Dynamic Collapse Analysis of Single-Layer Lattice Domes with Supporting Frames The Variational Principles of Coupled Systems in Fatigue Problem Undergoing Large Range Damage Increasing Productivity in Stair Construction Using EPS Technology as an Alternative Material Influence of Freezing-Thawing on Shear Strength of Frozen Soil in Northeast China The Effect of Filler Based on Calcium Silicates n Strength of Lime Composites Study on Tensile Creep Characteristics of High Strength Concrete Heat Capacity Measurements of Loose Materials with Respect to Long Heat Accumulation Thermal Analysis Application in Study of Alkali-Activated Blast Furnace Slag Analysis of the Settlement of Roadbed-Culvert Transitional Section in the High Salinity Regions Analysis of the Culvert Foundation Settlement under Different Construction Methods in High Salinity Regions Study on Continuum Damage Mechanics Model for High Cycle Fatigue Distribution of Displacements in Elastic Layer Analysis of Predictive Calculation Methods of Airborne Sound Insulation Calculation of an Anisotropic Hemispherical Shell with Inhomogeneous in the Meridian Direction Non-Linear Behavior of Spherical Shells under Static Ring Loads Chapter 8: Research and Design in Area of General Mechanical Engineering Elastohydrodynamic Lubrication in Ball Thrust Bearing Semiautomatic High Frequency Ultrasonic Testing System for Welded Plastic Pipes Optimization Design and Structure Design of Precision CNC Machine Parametric Study of Influence of Assembly and Design on the Center of Gravity of Public Buses Research and Application of a Novel Cluster Well Pumping Unit Development of Ultrasonic Surface Treatment Device Simulation and Experimental Study of a Scintillation Fiber Detector of the Activities of 63Ni-, 89Sr- and 90Sr-Based Radiation Sources Multi-Condition Analysis and Optimization of Sprayer Frame Simulation on Safety Property of Inner Support in Tire Design of an Improved Nonlinear Disc Spring Vibration Isolator Dynamic Behavior of Cellular Materials under Combined Shear-Compression Energy Model of Pulse Continuously Variable Transmission Finite Element Analysis Using Free Mesh Method The Research on the Design of Colors, Patterns and Texts for Paper Stocks Tea Packaging Visual Design Chapter 9: Mechatronics, Control and Robotics A High Accuracy Speed Control of DC Motor Using Adaptive Torque Compensation on Lyapunov Stability with Kalman Filter Design of Sliding Mode Based Differential Flatness Control of Leg-Wheel Hybrid Robot Research on Integrated Shift Control Strategy for Automatic Transmission Yaw Angle Measuring System of Omni-Directional Mobile Robot Based on EKF Development of Parallel Delta Robot System Controller Based on Raspberry Pi and FPGA Techniques for the Modelling and Control of Cutting Tools by the Use of 3D Scanners and CAD Programmes Research and Implementation of Real-Time Computing Algorithm of S Curve Acceleration and Deceleration for Step Motor Modeling and Control of a Haptic Lever to Regulate the Speed in Maritime Vehicles The Foams and Emulsions Ontology Model Chapter 10: Engineering Practice in Renewable Energy Sector Recent Trend of Solar Tracking System for Electric Power Conversion Effect of Shielding Object to the Specific Heat Demand for Heating of a House Experimental Study on the Wet Electrostatic Precipitator for Purifying Biomass Fuel Gas Wind Potential Assessment for the Utilization from Wind Energy in the Household Level: A Case Study of Nakhonratchasima Thailand Investment Profitability Analysis for Wind Power Project in Taiwan Chapter 11: Traffic and Transportation Systems Urban Rail Transit Types and Single Wire on the Propagation Law of Delays Effect of Platform Screen Door on Platform of Urban Rail Transit Passenger Crowding Analysis Passenger Safety Assessment in Urban Rail Transit Station Based on Systematic Dynamics Dimension Determination of Highway Guardrail Based on Safety Collision with Vehicle WiDRIVE Safety Innovation: Wireless Device for Regulation and Information on Vehicular Events A Method to Evaluate Vehicle Impact Speeds in Passenger Car-Pedestrian Accidents Chapter 12: Engineering Solutions in Area of Education Logatomic Tests as a Method of Evaluation of Speech Intelligibility in High Resolution A Comparative Analysis of the Frequency Spectrum of Speech in Logatomic Tests and Measurement Signals The Concept of Electrical Part of the Model of Micro-Energy Sources for Electrical Laboratories The Concept of Mechanical Part of the Model Micro-Energy Sources for Electrical Laboratories An Instructional Assistant Collaboration Server System Based on Cloud Platform Chapter 13: Industrial Engineering and Management Effective Methodology of Linking Enterprise Architect with Application Framework and Solutions in Business Practice The Research of Compose Method for Removal/Install Part in Aircraft Maintenance Manual Improvement of Administration Processes in Manufacturing Companies Petri Net Simulator for Small-Medium Enterprises' Business Process Management in a Network Business Environment A Hybrid Differential Evolution Algorithm Based on Dynamic Variable Neighborhood Search for Permutation Flowshop Scheduling Problem Performance Studies on Differential Evolution Algorithm and Shuffled Frog-Leaping Algorithm for Simulated Manufacturing Problems Comparison of Bee Algorithm and Scheduling Methodologies: A Case Study of Manufacturing in Thailand

「Nielsen BookData」 より

詳細情報

• NII書誌ID(NCID): BB21214058
• ISBN:
  • 9783038356806
• 出版国コード: sz
• タイトル言語コード: eng
• 本文言語コード: eng
• 出版地: Pfaffikon
• ページ数/冊数: xvi, 881 p.
• 大きさ: 24 cm
• 親書誌ID:
  • BA88918107