Additive manufacturing and strategic technologies in advanced ceramics : a collection of papers presented at CMCEE-11, June 14-19, 2015, Vancouver, BC, Canada
Author(s)
Bibliographic Information
Additive manufacturing and strategic technologies in advanced ceramics : a collection of papers presented at CMCEE-11, June 14-19, 2015, Vancouver, BC, Canada
（Ceramic transactions, v. 258）
John Wiley & Sons, c2016
Available at / 3 libraries
-
No Libraries matched.
- Remove all filters.
Note
"Copyright c2016 by The American Ceramic Society"--T.p. verso
"The 11th International Symposium on Ceramic Materials and Components for Energy and Environmental Applications (11th CMCEE), held June 14-19, 2015 at the Hyatt Regency Vancouver in Vancouver, B.C., Canada"--Pref
Includes bibliographical references and author index
Description and Table of Contents
Description
This volume contains a collection of 22 papers submitted from the below seven symposia held during the 11th International Symposium on Ceramic Materials and Components for Energy and Environmental Applications (CMCEE-11), June 14-19, 2015 in Vancouver, BC, Canada:
Additive Manufacturing Technologies
Advanced Materials, Technologies, and Devices for Electro-optical and Biomedical Applications
Multifunctional Coatings for Energy and Environmental Applications
Novel, Green, and Strategic Processing and Manufacturing Technologies
Powder Processing Technology for Advanced Ceramics
Computational Design and Modeling
Materials for Extreme Environments: Ultra-high Temperature Ceramics (UHTCs) and Nanolaminated Ternary Carbides and Nitrides (MAX Phases)
Table of Contents
Preface ix ADDITIVE MANUFACTURING TECHNOLOGIES
Additive Manufacturing of Micro Functional Structures through Diameter Variable Laser Stereolithography and Precursor Sintering Heat Treatments 3
Soshu Kirihara
Stereolithographic Additive Manufacturing of Solid Electrolyte Dendrites with Ordered Porous Structures for Fuel Cell Miniaturizations 11
Soshu Kirihara
Processing of Thermoplastic Suspensions for Additive Manufacturing of Ceramic- and Metal-Ceramic-Composites by Thermoplastic 3D-Printing (T3DP) 19
U. Scheithauer, E. Schwarzer, A. Haertel, H.J. Richter, T. Moritz, and A. Michaelis
Micro-Reactors Made by Lithography-Based Ceramic Manufacturing (LCM) 31
U. Scheithauer, E. Schwarzer, G. Ganzer, A. Kornig, W. Beckert, E. Reichelt, M. Jahn, A. Hartel, H. J. Richter, T. Moritz, and A. Michaelis
Functionally Graded Ceramic Based Materials using Additive Manufacturing: Review and Progress 43
Li Yang, Hadi Miyanaji, Durga Janaki Ram, Amir Zandinejad, and Shanshan Zhang
ADVANCED MATERIALS, TECHNOLOGIES, AND DEVICES FOR ELECTRO-OPTICAL AND BIOMEDICAL APPLICATIONS
A Neutron Detector Based on Boron-10 Enriched Scintillating Glasses 59
Dat Vu, Makena Dettmann, Victor Herrig, Luiz G. Jacobsohn, Matthew W. Kielty, James Wetzel, Yasar Onel, and Ugur Akgun
Engineering Approach to Improve the Solid State Lighting Characteristics with Translucent Poly Crystalline Alumina 69
Keiji Matsuhiro, Keiichiro Watanabe, Tsuneaki Ohashi, and Tomokatsu Hayakawa
Single Crystal Fibers of Cladded Doped-YAG for High Power Laser and Amplifier Applications 83
E. Gebremichael, B. Ponting, R. Magana, and G. Maxwell
Single Crystal Growth of Ferroelectric LaBGeO5 for Optical Frequency Conversion Devices 97
Shintaro Miyazawa, Mitsuyoshi Sakairi, Junji Hirohashi, Makoto Matsukura, Shunji Takekawa, and Yasunori Furukawa
The Growth of Potassium Tantalate Niobate (KTaxNb1-xO3) Single Crystal by Vertical Bridgman Method 105
Toshinori Taishi, Kazuya Hosokawa, Keigo Hoshikawa, Takahiro Kojima, Junya Osada, Masahiro Sasaura, Yasunori Furukawa, and Takayuki Komatsu
Growth of Y3Al5O12 Single Crystals via Edge-Defined Film-Fed Growth Technique Using MO Crucibles 113
T. Tokairin, J. Hayashi, G. Villora, and K. Shimamura
MULTIFUNCTIONAL COATINGS FOR ENERGY AND ENVIRONMENTAL APPLICATIONS
Nanoparticle Paste Injection into Gas-Flame Thermal Spray for Speedy Ceramic Coating 123
Soshu Kirihara
Contribution to Electrochemical Oxidation of a Xanthene Dye onto Cu2O Thin Film Electrode 131
M. El hajji, A. Tara, Ph. Dony, O. Jbara, L. Bazzi, A. Benlhachemi, and N. Kireche
Solution Precursor Plasma Sprayed Superhydrophobic Surface 141
Yuxuan Cai, Gisele Azimi, Thomas W. Coyle, and Javad Mostaghimi
Improvement of Interfacial Strength for Thermal Barrier Coatings by Formation of Wedge-Like Thermally Grown Oxide 149
Kazuhiro Ogawa, Shun Hatta, and Hiroyuki Yamazaki
Experimental Production of Industrial Roller Coated by Hard-Al2O3 Film using Aerosol Deposition Process 159
Naoki Seto, Kazuteru Endo, Noriaki Honda, Nobuo Sakamoto, Shingo Hirose, and Jun Akedo
NOVEL, GREEN, AND STRATEGIC PROCESSING AND MANUFACTURING TECHNOLOGIES
Stereolithographic Additive Manufacturing of Ceramics Dendrites to Modulate Energy and Material Flows 167
Soshu Kirihara
New Lightweight Kiln Furniture-Production Processes and Properties 177
U. Scheithauer, T. Slawik, E. Schwarzer, F. Tscharntke, H.-J. Richter, T. Moritz, and A. Michaelis
The Role of CALPHAD Approach in the Sintering of B4C with SiC as a Sintering Aid by Spark Plasma Sintering Technique 185
Mohammad Asadikiya, Christopher Rudolf, Cheng Zhang, Benjamin Boesl, and Yu Zhong
POWDER PROCESSING TECHNOLOGY FOR ADVANCED CERAMICS
Effective Exfoliation of Laminated h-BN Particles by a Novel Rotating Disk Method 195
Yuichi Tominaga, Daisuke Shimamoto, Kimiyasu Sato, Yusuke Imai, and Yuji Hotta
COMPUTATIONAL DESIGN AND MODELING
Feasible and Reliable Ab Initio Approach to Computation of Materials Relevant for Nuclear Waste Management 207
Piotr M. Kowalski, George Beridze, Yan Li, Yaqi Ji, Christoph Friedrich, Ersoy a yo lu, and Stefan Blugel
MATERIALS FOR EXTREME ENVIRONMENTS
Phase Evolution Phenomenon during Hot Pressing of the SHS obtained Ti3AlC2 Precursors Powders 221
L. Chlubny, J. Lis, Cz. Kapusta, D. Zientara, K. Chabior, and P. Chachlowska
Author Index 229
by "Nielsen BookData"
