Interface/interphase in polymer nanocomposites
Author(s)
Bibliographic Information
Interface/interphase in polymer nanocomposites
（Adhesion and adhesives: fundamental and applied aspects）
Scrivener Publishing, c2017
Available at / 2 libraries
-
No Libraries matched.
- Remove all filters.
Note
Includes bibliographical references and index
Description and Table of Contents
Description
Significant research has been done in polymeric nanocomposites and progress has been made in understanding nanofiller-polymer interface and interphase and their relation to nanocomposite properties. However, the information is scattered in many different publication media. This is the first book that consolidates the current knowledge on understanding, characterization and tailoring interfacial interactions between nanofillers and polymers by bringing together leading researchers and experts in this field to present their cutting edge research.
Eleven chapters authored by senior subject specialists cover topics including:
Thermodynamic mechanisms governing nanofiller dispersion, engineering of interphase with nanofillers
Role of interphase in governing the mechanical, electrical, thermal and other functional properties of nanocomposites, characterization and modelling of the interphase
Effects of crystallization on the interface, chemical and physical techniques for surface modification of nanocellulose reinforcements
Electro-micromechanical and nanoindentation techniques for interface evaluation, molecular dynamics (MD) simulations to quantify filler-matrix adhesion and nanocomposite mechanical properties.
Table of Contents
Preface xiii
Part 1 Nanocomposite Interfaces/Interphases
1 Polymer Nanocomposite Interfaces: The Hidden Lever for Optimizing Performance in Spherical Nanofilled Polymers 3
Ying Li, Yanhui Huang, Timothy Krentz, Bharath Natarajan, Tony Neely and Linda S. Schadler
1.1 Introduction 4
1.1.1 Dispersion Control 5
1.1.2 Interface Structure 6
1.1.3 Interface Properties 6
1.1.4 Measuring and Modeling the Interface 7
1.2 Dispersion Control through Interfacial Modification 8
1.2.1 Introduction 8
1.2.2 Short Ligands 8
1.2.3 Polymer Brush 11
1.2.3.1 Polymer Brush Synthesis Methods 12
1.2.3.2 Enthalpic and Entropic Contributions of Polymer Brushes to Dispersion Control 13
1.3 Interface Structure 16
1.3.1 Introduction 16
1.3.2 Effects of Particle Size 17
1.3.3 Effects of Crystallinity and Crosslinking 18
1.3.4 Effects of Polymer Brush Penetration 19
1.3.4.1 The Athermal Case 19
1.3.4.2 The Enthalpic Case 21
1.3.5 Characterizing the Interface Structure 22
1.4 Interface Properties and Characterization Techniques 24
1.4.1 Introduction 24
1.4.2 Molecular Mobility in Nanocomposite Interfaces 25
1.4.3 Thermomechanical Properties and Measurements 28
1.4.3.1 Direct Measurement 30
1.4.3.2 Indirect Methods 32
1.4.4 Dielectric Properties and Measurements 40
1.4.4.1 Effects of Nanofillers 42
1.4.4.2 Measurement Techniques 43
1.4.4.3 Indirect Measurement 44
1.4.4.4 Finite Element Modeling 50
1.4.5 Remarks on Characterization Methods 52
1.5 Summary 53
Acknowledgements 54
References 55
2 Interphase Engineering with Nanofillers in Fiber-Reinforced Polymer Composites 71
Jozsef Karger-Kocsis, Sandor Keki, Haroon Mahmood and Alessandro Pegoretti
2.1 Introduction 72
2.2 Interphase Tailoring for Stress Transfer 74
2.2.1 Coating with Nanofillers 74
2.2.2 Creation of Hierarchical Fibers 80
2.2.2.1 Chemical Grafting of Nanofillers 80
2.2.2.2 Chemical Vapor Deposition (CVD) 81
2.2.2.3 Other "Grafting" Techniques 83
2.2.3 Effects of Matrix Modification with Nanofillers 85
2.3 Interphase Tailoring for Functionality 87
2.3.1 Sensing/Damage Detection 87
2.3.2 Self-Healing/Repair 89
2.3.3 Damping 91
2.4 Outlook and Future Trends 91
2.5 Summary 93
2.6 Acknowledgements 93
2.7 Nomenclature 94
References 94
3 Formation and Functionality of Interphase in Polymer Nanocomposites 103
Peng-Cheng Ma, Bin Hao and Jang-Kyo Kim
3.1 Introduction 103
3.2 Formation of Interphase in Polymer Nanocomposites 105
3.3 Functionality of Interphase in Polymer Nanocomposites 111
3.3.1 Load Transfer in Nanocomposites 111
3.3.2 Reduction in Growth Rate of Fatigue Cracks in Nanocomposites 116
3.3.3 Controlling the Fracture Behavior of Nanocomposites 119
3.3.4 Enhancing the Damping Properties of Nanocomposites 121
3.3.5 Channels for the Transport of Ions and Moisture in Nanocomposites 123
3.3.6 Phonon Scattering in Nanocomposites 125
3.3.7 Electron Transfer in Nanocomposites 128
3.4 Summary and Prospects 130
Acknowledgements 133
References 133
4 Impact of Crystallization on the Interface in Polymer Nanocomposites 139
Nandika D'Souza Siddhi Pendse, Laxmi Sahu, Ajit Ranade and Shailesh Vidhate
4.1 Introduction 140
4.2 Thermodynamics of Crystallization 142
4.3 Nylon Nanocomposites 144
4.4 Dispersion of MLS in Nanocomposites 145
4.5 Effect of MLS on Thermal Transitions in Nylon 146
4.6 Permeability 149
4.7 PET Nanocomposites 151
4.8 Dispersion of MLS in Nanocomposites 151
4.9 Effect of MLS on Thermal Transitions in PET 151
4.10 PEN Nanocomposites 156
4.11 Dispersion of MLS in Nanocomposites 156
4.12 Effect of MLS on Thermal Transitions in PEN 157
4.13 Permeability 162
4.14 The Role of the Interface in Permeability: PET versus PEN 162
4.15 Summary 167
References 168
5 Improved Nanofiller-Matrix Bonding and Distribution in GnP-reinforced Polymer Nanocomposites by Surface Plasma Treatments of GnP 171
Rafael J. Zaldivar and Hyun I. Kim
5.1 Introduction 172
5.2 Experimental 173
5.2.1 Composite Fabrication 173
5.2.2 Image Analysis 174
5.2.3 Raman Spectroscopy 174
5.2.4 X-ray Photoelectron Spectroscopy (XPS) 174
5.2.5 Scanning Electron Microscopy (SEM) 175
5.2.6 Mechanical Testing 175
5.3 Results 175
5.4 Conclusions 187
Acknowledgement 187
References 187
6 Interfacial Effects in Polymer Nanocomposites Studied by Thermal and Dielectric Techniques 191
Panagiotis Klonos, Apostolos Kyritsis and Polycarpos Pissis
6.1 Introduction 192
6.2 Experimental Techniques 197
6.2.1 Differential Scanning Calorimetry (DSC) 197
6.2.2 Dielectric Techniques 202
6.2.2.1 Broadband Dielectric Spectroscopy (BDS) 203
6.2.2.2 Thermally Stimulated Depolarization Current (TSDC) Techniques 207
6.3 Evaluation in Terms of Interfacial Characteristics 209
6.3.1 Analysis of DSC Measurements 209
6.3.2 Analysis of Dielectric Measurements 211
6.3.3 Thickness of the Interfacial Layer 213
6.4 Examples 214
6.4.1 DSC Measurements 214
6.4.2 Dielectric Measurements 221
6.5 Prospects 235
6.6 Summary 236
Acknowledgements 237
References 237
Part 2 Techniques to Characterize/Control Nanoadhesion
7 Investigation of Interfacial Interactions between Nanofillers and Polymer Matrices Using a Variety of Techniques 251
Luqi Liu
7.1 Introduction 251
7.2 Observation of Interfacial Layer in Nanostructured Carbon Materials-based Nanocomposites 253
7.2.1 Characterization of Interface Layer Around CNTs 253
7.2.2 Characterization of Interface Layer Around Graphene Sheets 255
7.3 Interfacial Properties between Nanofiller and Polymer Matrix 256
7.3.1 Theoretical Simulations of CNT and/or Graphene-based Nanocomposites 256
7.3.1.1 Theoretical Simulation of CNT-based Nanocomposites 256
7.3.1.2 Theoretical Simulation of Graphene-based Nanocomposites 258
7.3.2 Experimental Studies to Characterize Interfacial Behavior in CNT and/or Graphene-based Nanocomposite Systems 260
7.3.2.1 Indirect Measurement 261
7.3.2.2 Direct Measurement 261
7.4 Summary 270
Acknowledgements 271
References 271
8 Chemical and Physical Techniques for Surface Modification of Nanocellulose Reinforcements 279
Viktoriya Pakharenko, Muhammad Pervaiz, Hitesh Pande and Mohini Sain
8.1 Introduction 279
8.2 Chemical Surface Modification 281
8.2.1 Acetylation 281
8.2.2 Silylation 284
8.2.3 Bacterial Treatment 285
8.2.4 Grafting 287
8.2.5 Surfactant Adsorption 289
8.2.6 TEMPO-mediated Oxidation 290
8.2.7 Click chemistry 292
8.3 Physical Surface Modification 292
8.3.1 Plasma 292
8.3.2 Corona 297
8.3.3 Laser 299
8.3.4 Flame 299
8.4 Use of Ions 300
8.5 Summary 300
Acknowledgments 301
References 301
9 Nondestructive Sensing of Interface/Interphase Damage in Fiber/Matrix Nanocomposites 307
Zuo-Jia Wang, Dong-Jun Kwon, Jin-Yeong Choi, Pyeong-Su Shin, K. Lawrence DeVries and Joung-Man Park
9.1 Introduction 308
9.2 Experimental Specimens and Methods 311
9.2.1 Gradient Specimen Test 311
9.2.2 Dual Matrix Fragmentation Test 314
9.3 Damage Sensing Using Electrical Resistance Measurements 317
9.3.1 Electrical Resistance Measurement for Strain Sensing Application 317
9.3.2 Electrical Resistance Measurement for Interface/Interphase Evaluation 321
9.4 Summary 327
References 327
10 Development of Polymeric Biocomposites: Particulate Incorporation, Interphase Generation and Evaluation by Nanoindentation 333
Oisik Das and Debes Bhattacharyya
10.1 Introduction 334
10.2 The Definitions of Composite and its Constituents 337
10.2.1 Composite 337
10.2.2 Biocomposite 337
10.2.3 The Reinforcement 337
10.2.4 The Matrix 338
10.3 Physical and Chemical Structures of Bio-based Reinforcements 339
10.3.1 Plant/Vegetable-based Reinforcements/Fibres 339
10.3.1.1 Physical Structure 339
10.3.1.2 Chemical Structure 339
10.3.2 Animal-based Reinforcements/Fibres 342
10.3.2.1 Physical Structure 342
10.3.2.2 Chemical Structure 343
10.4 Particulate and Short Fibre Composites 344
10.4.1 Biochar as Potential New Bio-based Particulate Reinforcement 345
10.4.2 Properties of Particulate-based Composites: Governing Factors 351
10.4.2.1 Particulate Properties 351
10.4.2.2 Particulate Structure 355
10.5 Nanoindentation Technique to Determine Interphase and Composite Properties 358
10.5.1 The Technique and Theory of Nanoindentation 358
10.5.1.1 Different Types of Indenter Tips 360
10.5.1.2 Nanoindentation Theory 362
10.5.1.3 Nanoindentation Instrument 364
10.5.2 Nanoindentation on Polymeric Composites and their Interphase 364
10.5 Concluding Remarks 369
References 370
11 Perspectives on the Use of Molecular Dynamics Simulations to Characterize Filler-Matrix Adhesion and Nanocomposite Mechanical Properties 375
Sanket A. Deshmukh, Benjamin J. Hanson, Qian Jiang and Melissa A. Pasquinelli
11.1 Introduction 376
11.2 Overview of Molecular Dynamics (MD) Simulations 377
11.3 Characterization of Interfacial Adhesion with MD Simulations 381
11.3.1 Quantifying Adhesion Strength 381
11.3.2 Effect of the Strength of Matrix-Filler Interactions 383
11.3.3 Effect of Filler Geometry 386
11.3.4 Effect of Ordering and Crosslinking within the Polymer Matrix 388
11.4 Characterization of Mechanical Properties with MD Simulations 391
11.4.1 Predicting Static Mechanical Properties 392
11.4.2 Predicting Dynamic Mechanical Properties 395
11.5 Prospects 399
11.6 Summary 400
Acknowledgements 400
References 400
by "Nielsen BookData"
