Proceedings of the 12th Pacific Rim Conference on Ceramic and Glass Technology : a collection of papers presented at the 12th Pacific Rim Conference on Ceramic and Glass Technology, May 21-26, 2017, Waikoloa, Hawaii
著者
書誌事項
Proceedings of the 12th Pacific Rim Conference on Ceramic and Glass Technology : a collection of papers presented at the 12th Pacific Rim Conference on Ceramic and Glass Technology, May 21-26, 2017, Waikoloa, Hawaii
(Ceramic transactions, 264)
John Wiley & Sons, 2018
- タイトル別名
-
PACRIM 12
大学図書館所蔵 件 / 全1件
-
該当する所蔵館はありません
- すべての絞り込み条件を解除する
注記
"c2018 The American Ceramic Society"--T.p. verso
Includes bibliographical references
内容説明・目次
内容説明
Ceramic Transactions, Volume 264, Proceedings of the 12th Pacific Rim Conference on Ceramic and Glass Technology
Dileep Singh, Manabu Fukushima, Young-Wook Kim, Kiyoshi Shimamura, Nobuhito Imanaka, Tatsuki Ohji, Jake Amoroso, and Michael Lanagan; Editors
This proceedings contains a collection of 32 papers presented at the 12th Pacific Rim Conference on Ceramic and Glass Technology (PacRim12), May 21-26, 2017 in Waikoloa, Hawaii. PacRim is a bi-annual conference held in collaboration with the ceramic societies of the Pacific Rim countries - The American Ceramic Society, The Chinese Ceramic Society, The Korean Ceramic Society, and the Australian Ceramic Society. Topics included in this collection include multiscale modeling and simulation, processing and manufacturing, nanotechnology, multifunctional materials, ceramics for energy and the environment, biomedical materials, and more
目次
Preface xi
MULTISCALE MODELING AND SIMULATION
SYMPOSIUM 2: VIRTUAL MATERIALS DESIGN AND CERAMIC GENOME
D Degrees Ferromagnetism of SiC Ceramics 3
Y. Huang, D. Jiang, and Z. Huang
INOVATIVE PROCESSING AND MANUFACTURING
SYMPOSIUM 3: NOVEL, GREEN, AND STRATEGIC PROCESSING AND MANUFACTURING TECHNOLOGIES
Controlling Factors for Creating Dense SiC-Polycrystalline Fiber 11
Ryutaro Usukawa and Toshihiro Ishikawa
Eco-Friendly Synthesis of Graphene using High Pressure Airless Spray System 23
Karanveer S. Aneja and Anand Khanna
SYMPOSIUM 4: POLYMER DERIVED CERAMICS (PDCS) AND COMPOSITES
Effect of Ion Implantation on a Precursor Polymer for Synthesis of Carbon Material with Catalytic Performance 33
A. Idesaki, M. Sugimoto, S. Yamamoto, and T. Yamaki
SYMPOSIUM 6: SYNTHESIS AND PROCESSING OF MATERIALS USING ELECTRIC CURRENTS AND PRESSURES
Microstructure and Grain Size Distributions in Magnesia-Alumina Spinel Ceramics Prepared by Spark Plasma Sintering 41
T. Uhliova, V. Neina, Willi Pabst, and P. Diblikova
SYMPOSIUM 7: POROUS CERAMICS
Microstructure Characterization of Porous Ceramics via Minkowski Functionals 53
W. Pabst, T. Uhliova, and E. Gregorova
Numerical Modeling of Elastic Modulus and Conductivity of Porous Alumina-Effects of Pore Shape, Pore Size Distribution and Pore Distance 65
W. Pabst, E. Gregorova, and T. Uhli ova
Experimental Investigation and Analysis of Mechanical Properties of Three-Dimensionally Networked Porous Carbon Material 77
Ryo Inoue, Geng Li, Eisuke Kojo, Miki Nakajima, Yuki Kubota, and Yasuo Kogo
NANOTECHNOLOGY AND STRUCTURAL CERAMICS
SYMPOSIUM 10: MULTIFUNCTIONAL NANOMATERIALS AND THEIR HETEROSTRUCTURES FOR ENERGY AND SENSING DEVICES
Development of Miniature Generator Combined with Magnetic Ceramic Material and Silicon Micro Air Turbine
K. Mishima, K. Kudo, M. Takato, K. Saito, and F. Uchikoba
SYMPOSIUM 11: ENGINEERING CERAMICS: PROCESSING AND CHARACTERIZATIONS
Temperature Dependence of Young's Modulus of Silicate Ceramics from the Magnesia-Alumina-Silica System 99
E. Gregorova, T. Smolikova, and W. Pabst
Sintering, Structure and Properties of AlB12-Based Ceramics 111
Prikhna, P. P. Barvitskiy, S. N. Dub, V. B. Sverdun, R. A. Haber, V. Domnich, . V. Karpets, S. S. Ponomaryov, V. E. Moshchil, and V. B. Muratov
High Dielectric Strength Ceramic for Power Tubes 121
D. Hodgeman, M. Habermann, C. T. Lee, and A.K. Bakshi
SYMPOSIUM 12: DESIGN, DEVELOPMENT AND APPLICATIONS OF CERAMIC MATRIX COMPOSITES
Microstructural and Mechanical Characterization of Damage Tolerant SiC/SiCN Ceramic Matrix Composites Manufactured via Pip Process 129
B. Mainzer, R. Jemmali, M. Friess, and D. Koch
SYMPOSIUM 13: ADVANCED STRUCTURAL CERAMICS FOR EXTREME ENVIRONMENTS
Crystal Structure of the Defect Pyrochlore Potassium Tantalate on Ion-Exchanging Dipping in Sodium Aqueous Solution by Rietveld Analysis
Takashi Hashizume, Atsushi Saiki, and Shogo Miwa
SYMPOSIUM 16: GEOPOLYMERS: LOW-ENERGY AND ENVIRONMENTAL-FRIENDLY CERAMICS
Preparation and Structure of Geopolymer-Based Alkali-Activated CFB Ash Composite For Removing Ni2+ from Wastewater 147
M. Krol, P. Ro ek, and W. Mozgawa
MULTIFUNCTIONAL MATERIALS AND SYSTEMS
SYMPOSIUM 17: ADVANCED FUNCTIONAL CERAMICS AND CRITICAL MATERIALS PERSPECTIVE
Dielectric Properties and Resource Criticality Aspects of Hexagonal Manganite 157
Alexander Ruff, Ziyu Li, Mario Schafnitzel, and Stephan Krohns
Catalytic Activity of Liquid-Phase Reaction over Perovskite-Type Oxide Catalyst Synthesized From Heteronuclear Metal Cyano Complex Precursor 165
Syuhei Yamaguchi, Daniel Sanchez-Rodriguez, and Hidenori Yahiro
Development of Tunable Devices Using Barium Strontium Titanate Thin Films 179
K. Morito, M. Natsume, and S. Sekiguchi
Proceedings of the 12th Pacific Rim Conference on Ceramic and Glass Technology Dielectric Properties of Confined Ionic Liquids 191
Pit Sippel, Stephan Krohns, Dmytro Denysenko, and Dirk Volkmer
SYMPOSIUM 20: CRYSTALLINE MATERIALS FOR ELECTRICAL, OPTICAL AND MEDICAL APPLICATIONS
Large Format Li Co-Doped Nai:Tl (NailTM) Scintillation Detector for Gamma-Ray and Neutron Dual Detection 201
P.R. Menge, K. Yang, and V. Ouspenski
Annealing Induced Structural Phase Change of Hexagonal- LuFeO3 Thin Films 209
R. C. Rai, D. Mckenna, C. Horvatits, and J. Du Hart
Processing and Characterization of Zinc Sulfide and Calcium Fluoride Composite Ceramics 217
N. Ku, V. L. Blair, and K. D. Behler
CERAMICS FOR ENERGY AND ENVIRONMENT
SYMPOSIUM 22: DIRECT THERMAL TO ELECTRICAL ENERGY CONVERSION MATERIALS AND APPLICATIONS
Thermoelectrochemical Cells with Molten Carbonate Electrolytes and Gas Electrodes 227
Geir Martin Haarberg, Sathiyaraj Kandhasamy, Signe Kjelstrup, Marit T. Borset, Odne Burheim, and Xue Kang
SYMPOSIUM 23: MATERIALS FOR SOLAR THERMAL ENERGY CONVERSION AND STORAGE
Catalytic SO3 Decomposition Activity and Stability of Supported Molten Vanadate Catalysts For Solar Thermochemical Water Splitting Cycles 235
Alam S. M. Nur, A. Yamashita, T. Matsukawa, T. Kawada, and M. Machida
SYMPOSIUM 25: CERAMICS FOR NEXT GENERATION NUCLEAR ENERGY
Recent Developments on ISOL Targets for the SPES Project for Nuclear Physics and Applications 245
S. Corradetti, F. Borgna, M. Ballan, L. Biasetto, S. Carturan, M. Manzolaro, M.D.M. Innocentini, P. Colombo, and A. Andrighetto
Nuclear Fuel Modelling and Perspectives on Canadian Efforts in Fuel Development 253
M.H.A. Piro, A. Prudil, M.J. Welland, W. Richmond, A. Bergeron, E. Torres, C. Maxwell, J. Pencer, N. Harrison, and M. Floyd
SYMPOSIUM 27: CERAMICS FOR ENABLING ENVIRONMENTAL PROTECTION: CLEAN AIR AND WATER
Low-Cost Preparation Method for Anti-Dirt Coating on Concrete Block Using Titanium Oxide Photocatalytic Powder 267
S. Ono, N. Kishikawa, S. Kawase, T. Hayashi, and N. Asano
SYMPOSIUM 29: ADVANCES IN POLAR, MAGNETIC AND SEMICONDUCTOR MATERIALS: EXTENDING TEMPERATURE LIMITS
Development of Dielectric Materials Based on Multilayer Ceramic Capacitors for High Temperature Applications 279
Jun Ikeda, Shoichiro Suzuki, Toshikazu Takeda, Atsushi Honda, Hiroaki Kawano, Seiji Katsuta, and Harunobu Sano
Towards High Energy Density Glass Capacitors 291
Rudeger H.T. Wilke, Adrian Casias, Carl Fitzgerald, Amanda Gomez, and Robert Timon
CERAMICS IN BIOLOGY, MEDICINE AND HUMAN HEALTH
SYMPOSIUM 32: NANOSTRUCTURED BIOCERAMICS AND CERAMICS FOR BIOMEDICAL APPLICATIONS
Design of Experiment Optimization of Artificial Bone Construct Fabrication via Direct Ink Writing of Hydroxyapatite 301
C. M. Gigliotti, R. W. Marks, Z. R. Wilczynski, G. S. Lewis, H. J. Donahue, and J. H. Adair
3rd INTERNATIONAL RICHARD M. FULRATH SYMPOSIUM ON DISCONTINUOUS PROGRESS FOR CERAMIC INNOVATIONS
Recent Topics in the Field of Ferroelectric Materials for BME-MLCCs 315
Takeshi Nomura, Yukari Sasaki, Atsushi Nemoto, and Yuji Akimoto
YOUNG INVESTIGATOR FORUM: DESIGN AND APPLICATION OF NEXT GENERATION MULTIFUNCTIONAL MATERIALS
High Temperature Durability of Oxide-Oxide Ceramic Matrix Composites Exposed to Engine Relevant Conditions 331
M.J. Walock, V. Heng, A. Nieto, A. Ghoshal, D. Driemeyer, and M. Murugan
「Nielsen BookData」 より