検索結果を絞り込む

本文・本体へのリンク

検索結果 681 件

  • Modelling of Short-Circuit Protection for A Residential Grid-Connected BESS

    Kong De Kang, Jamaludin Farah Adilah, Tan Rodney 人工生命とロボットに関する国際会議予稿集 29 811-817, 2024-02-22

    ...The BESS model and control algorithm is developed in MATLAB/Simulink environment. The BESS model can charge and discharge its energy with an algorithm-controlled bidirectional AC/DC converter....

    DOI

  • Optimized Fuzzy Management Strategy for Hybrid Energy Storage-based Microgrid

    Kien Do Chi, Van Long Phan, Hieu Hoang Long, Nguyen Duc Tuyen SEATUC journal of science and engineering 4 (1), 29-37, 2023-10-19

    ...To check the performance of the proposed optimizer, a comparative simulation is carried out in MATLAB/SIMULINK. The results have proved the proposed algorithm’s superiority over other optimizers....

    DOI

  • Task Mapping and Scheduling for Model-based Parallelization tested on a Multi-core Processor with Vector Accelerator

    Wu, Shanwen, 熊野, 聡, 丸目, 佳, 枝廣, 正人 DAシンポジウム2023論文集 2023 63-70, 2023-08-23

    ...本論文では Simulink モデルからマルチスレッドコードを自動生成するワークフローとその中のタスクマッピング・スケーリング手法を提案した.並列実行に対してタスク順序を保持するためのスレッド間の同期は性能向上に関わるため,同期オーバーヘッド考慮して並行時間を短縮するよう整数線形計画(ILP)定式化を行った.そして,大量のランダムタスクグラフ実験を用いて定式化の効果を検証した.提案したモデルベース並列化...

    情報処理学会

  • A five-level inverter based on differential structure

    Zhang Shaoru, Liu Yang, Du Xiuju, Zhang Yanhua, Yang Wenxiu, Jia Yikun, Zhang Jielu, Luo Fang Lin IEICE Electronics Express 20 (7), 20220555-20220555, 2023-04-10

    ...The proposed five-level inverter is simulated by MATLAB/Simulink and the prototype is made to experiment.</p>...

    DOI Web Site 参考文献31件

  • 体腔内手術における対象臓器と手技を考慮したデバイス設計支援シミュレータ

    後藤 彰汰, 鶴岡 典子, 芳賀 洋一 生体医工学 Annual61 (Abstract), 230_1-230_1, 2023

    ...要求仕様が多く複雑で設計・試作に時間と費用がかかるという課題がある.本研究では,シミュレータを用いた医療デバイスの開発支援を提案する.シミュレータ内に評価で用いる実験(手術)環境を構築し,複数の臓器や手技を考慮したデバイス設計と実試作前の効果と安全性の確認を行うことで試行錯誤回数の低減が期待できる.また,本シミュレータは臨床医を交えた試行錯誤において使用することも想定している.本研究では,MATLAB/Simulink...

    DOI

  • Application of new sliding mode control in vector control of PMSM

    Yang Hao, Tang Jing-Wei, Chien Ying-Ren IEICE Electronics Express 19 (13), 20220156-20220156, 2022-07-10

    ...the traditional sliding mode control (SMC) has the problem of serious chattering, Therefore, on this basis, an SMC based on the new reaching law is designed, and the simulation is carried out in Matlab/Simulink...

    DOI Web Site 被引用文献5件 参考文献27件

  • プログラミング・ツールとしてのSimulinkの教材活用

    猪本 修 日本科学教育学会研究会研究報告 36 (3), 69-72, 2022-03-06

    ....またブロックからは微分方程式を構成する一つひとつの項の意味づけとはたらきを視覚的に把握することができるため,微分方程式そのものの理解を深めることができる.ここではSimulinkにおけるこれらの利点に着目して,Simulinkをプログラミング・ツールとして理科教育に取り入れることを検討するとともに,その活用事例をいくつか取り上げることとした.主として高校物理で扱われる系のうちいくつかについて,それらの...

    DOI

  • Design and simulation of DC distributed power supply with power balance control technique

    Uthen Kamnarn, Jedsada Yodwong, Pratch Piyawongwisal, Pakawadee Wutthiwai, Anon Namin, Phatiphat Thounthong, Noureddine Takorabet International Journal of Power Electronics and Drive Systems (IJPEDS) 13 (1), 460-, 2022-03-01

    ...The DC Distributed system is simulated by MATLAB/Simulink. The system has 1 kW power rating and contains 6 voltage bus with voltage ratings of 380, 100, 60, 48, 24, and 12 V....

    DOI Web Site 被引用文献1件

  • 分散処理に対応したSimulink・UMLモデル変換ツール

    西村, 太凱, 横山, 孝典, 兪, 明連 第84回全国大会講演論文集 2022 (1), 79-80, 2022-02-17

    ...具体的には、Simulinkモデルと配置情報を入力と、クラス図、オブジェクト図、シーケンス図およびアクティビティ図を出力する。そして、複数のSimulinkモデルに対して適用実験を行い、本モデル変換ツールの有用性を確認した。...

    情報処理学会

  • 電動車いすの理論に基づくSIMULINKモデル

    阿部 己和, 梶谷 満信 産業応用工学会論文誌 10 (1), 22-27, 2022

    ...And through the simulation using this SIMULINK Model, it is clarified that the gravity center of the chair must be considered to develop the algorithm....

    DOI

  • 自律飛行検証用ドローンシミュレータの開発

    竹村 優一, 鈴木 智, 市川 智康, 栗原 寛典, 隅田 和哉 ロボティクス・メカトロニクス講演会講演概要集 2022 (0), 1A1-J09-, 2022

    ...In this study, we constructed a simulator using MATLAB/Simulink and Simscape Multibody, and conducted controller adjustment experiment for a single drone and verification of autonomous control laws for...

    DOI Web Site

  • Fuzzy pid control of electromechanical actuator system

    Cuicui Li, Wenjun Yi, Hongqiao Yin, Jun Guan Journal of Physics: Conference Series 1721 (1), 012052-, 2021-01-01

    ...The electromechanical actuator control system adopted the three-loop structure, and current loop, speed loop and position loop were built on the platform of MATLAB / Simulink....

    DOI Web Site Web Site 被引用文献1件

  • モデルベースデザインの普及トレンドと業界動向

    川浪 洋資 日本画像学会誌 59 (5), 509-513, 2020-10-10

    <p>組み込みソフトウェアの開発能力の強化や人材の確保が近年日本の産業界の課題となっている.そのような状況の中,従来の組み込みシステム開発の課題を解消するためのモデルベースデザイン (MBD : Model-Based Design) が様々な産業界で適用が広がっている.本稿では,まずモデルベースデザインがどのような開発手法であるのか,従来の開発手法と比較してどのようなメリットがあるのかを示す.…

    DOI Web Site

  • 【企業講演】MATLABを活用したオンライン授業

    村松 未輝雄 電気関係学会九州支部連合大会講演論文集 2020 (0), 74-74, 2020-09-18

    ...MATLAB・Simulinkをはじめ、オンライン上で利用可能なMATLABや、自己学習教材、自動採点システムなどのオンライン授業で活用できるツールを展開しています。本セッションでは、これらツールを組み合わせて、遠隔教育での課題解決のためにMATLABを活用した例を紹介いたします。</p>...

    DOI

  • FPGA混在のHM-SoCに対するモデルベース並列化設計開発環境の検討

    山本, 椋太, 小川, 真彩高, 生沼, 正博, 近藤, 真己, 本田, 晋也, 枝廣, 正人 DAシンポジウム2020論文集 2020 81-88, 2020-08-31

    ...HM-SoC)向けのアルゴリズムレベルの並列化や,異なる PE 間での通信や同期制御の実装は高コストである.そこで,本稿では FPGA 搭載の HM-SoC に対して,MATLAB/Simulink で設計したモデルから並列化コードを生成する統合型設計環境である HS-MBP を提案する.提案環境が持つツールでは,異なる PE 間での通信をサポートしている....

    情報処理学会

  • Economy Mode Setting Device for Wind-Diesel Power Plants

    Andrey Dar’enkov, Elena Sosnina, Andrey Shalukho, Ivan Lipuzhin Energies 13 (5), 1274-, 2020-03-10

    ...An algorithm for the WDPP intelligent control system has been developed and tested using the WDPP Simulink model. The EMSD prototype has been created, and its research has been conducted....

    DOI Web Site 被引用文献1件

  • SMTソルバを用いたSimulinkモデルのテストケース生成

    八田, 竜起, 石井, 大輔 第82回全国大会講演論文集 2020 (1), 233-234, 2020-02-20

    ...組み込みシステムの開発において、Simulinkモデルのカバレッジテストが重要である。しかしモデルが大規模や非線形になると、条件を満たす入力信号を手動生成することは難しい。そこで本研究では、Simulinkのテストケースを自動生成することを目的とする。手法として、SMTソルバによる静的解析を提案する。まず、モデルの単位時間ごとの振る舞いやカバレッジ条件を制約として記述する。...

    情報処理学会

  • Modeling of the Manifold Configuration for Maximum Efficiency in a Hydraulic Machine

    Kothari Kesar M, Udayakumar R., Karthikeyan Ram, S Vishweshwar, Raj Nikitha International Journal of Fluid Machinery and Systems 13 (1), 136-149, 2020

    ...The values obtained from CFD and the characteristic of the valves from the manufacturer’s catalogue are used to create the manifold in Matlab Simulink to predict the performance of the manifold at different...

    DOI

  • Modeling of the Manifold Configuration for Maximum Efficiency in a Hydraulic Machine

    Kothari Kesar M, Udayakumar R., Karthikeyan Ram, S Vishweshwar, Raj Nikitha International Journal of Fluid Machinery and Systems 13 (1), 136-149, 2020

    ...The values obtained from CFD and the characteristic of the valves from the manufacturer’s catalogue are used to create the manifold in Matlab Simulink to predict the performance of the manifold at different...

    DOI

  • 地域冷暖房システムシミュレーションによる搬送動力低減手法の検討 (第1報)定/変差圧制御におけるポンプ関連効率の違い

    中村 元, 廣島 雅則, 國友 理 空気調和・衛生工学会大会 学術講演論文集 2020.2 (0), 213-216, 2020

    <p>地域冷暖房システムにおける温水搬送系の搬送動力を解析するためのシステムシミュレーションモデルを構築し、定/変差圧制御におけるポンプ関連効率や消費電力の違いをシミュレーションによって明らかにした。特に、定差圧制御では低負荷時にポンプ効率が大きく低下するのに対し、変差圧制御では熱負荷が変動してもポンプ効率がほぼ一定で低下しないため、搬送動力の大幅な低減が可能となり、省エネルギーに寄与することが…

    DOI

  • モデルベースアプローチによるモーターバッテリ駆動回生システムに対する汎用シミュレータの開発

    中田 志高, 茂木 和弘, 白石 洋一 エレクトロニクス実装学術講演大会講演論文集 34 (0), 4A1-03-, 2020

    ...<p>MATLAB/Simulinkを用いてモデルベース開発による超小型モビリティに対する回生制御シミュレーションの研究を行っている.本研究では超小型電気自動車を研究対象としている.超小型電気自動車は内燃機関自動車に比べて一度の航続距離が短い欠点がある.この欠点の改善方法として高効率駆動・回生制御を行うことでエネルギーロスを減らし航続距離の拡大を図っている.今後、本研究のモデルを基にモータやバッテリ...

    DOI

  • MMC適用多端子HVDCシステムの電力潮流制御

    武藤 司, 白濱 秀文, 大山 和宏 電気関係学会九州支部連合大会講演論文集 2019 (0), 517-517, 2019-09-19

    ...Multilevel Converter)は,洋上風力発電設備からの直流送電(HVDC)など,電力分野で期待されている.これまでMMCの大規模システム向け簡略化モデルを開発し,MMC適用二端子HVDCシステムを対象に電圧マージンによる電力潮流制御をシミュレーションで検討してきた.今回,これまでの検討結果を基に電圧マージン方式電力潮流制御をMMC適用多端子HVDCシステムに拡張子し,MATLAB-Simulink...

    DOI

  • 組込みに使うプログラミング言語について語ろう!

    間瀬, 順一 組込みシステムシンポジウム2019論文集 2019 27-27, 2019-08-29

    ...組込みソフトウェア開発では,長く C が使われています.一方,車載 ECU のソフトウェア開発では,MBD(MATLAB/Simulink)も普及期に来たと考えられています.組込みソフトウェア開発で使われるには,言語としてどんな特性が有利/不利なのかみんなで語りましょう.パネルディスカッションの形式をとります....

    情報処理学会

  • 応用例(1):再使用ロケット誘導制御系設計とモンテカルロ評価

    塚本 太郎, 濱田 吉郎, 南 吉紀, 大坊 俊彰, 石本 真二 日本航空宇宙学会誌 67 (6), 223-226, 2019-06-05

    ...では必要不可欠の技術となっている.一方,モンテカルロ・シミュレーションによる評価や最適化技術は宇宙輸送系に限らず広く航空宇宙分野に適用することができるため,JAXAでは汎用的に利用可能なMCS並列計算システムの整備を行っている.ここでは垂直着陸型の再使用ロケットについての誘導制御検討と,MCS並列計算システムの適用について紹介する.特に,近年は誘導制御解析におけるシミュレーションでもMatlab/Simulink...

    DOI Web Site

  • Experimental study on transient response of fuel cell

    Ameerul A. J. Jeman, Naeem M. S. Hannoon, Nabil Hidayat, Mohamed M. H. Adam, Ismail Musirin, Vijayakumar V. Bulletin of Electrical Engineering and Informatics 8 (2), 375-381, 2019-06-01

    ...The dynamic modeling of the standalone fuel cell that is connected to a dc motor is carried out using MATLAB/SIMULINK platform....

    DOI Web Site 被引用文献1件

  • Ride Blending Control for Electric Vehicles

    Vincenzo Ricciardi, Valentin Ivanov, Miguel Dhaens, Bert Vandersmissen, Marc Geraerts, Dzmitry Savitski, Klaus Augsburg World Electric Vehicle Journal 10 (2), 36-, 2019-05-31

    ...The simulation analysis is conducted with an experimentally validated vehicle model in CarMaker® and MATLAB/Simulink co-simulation environment including high-fidelity vehicle subsystems models....

    DOI Web Site 被引用文献1件

ページトップへ