検索結果 524 件

Saisa-ard Siraphop, Keerativoranan Nopphon, Takada Jun-ichi IEICE Communications Express 13 (4), 97-100, 2024-04-01

...In this work, a single-dominant-ray knife-edge diffraction model is proposed to approximate the overall shadowing gain from a cuboid-shaped vehicle by a single diffraction ray....

DOI PDF 参考文献8件

Nopphon Keerativoranan, Jun-ichi Takada IEICE Proceeding Series 79 P2-2-, 2023-11-29

Cyber-physical wireless channel emulator is developed to emulate and evaluate the performance of site- and scenario-specific wireless channel. Grid-based channel interpolation technique was …

DOI

Rong Li, Weiwei Li, Yong Wang, Yuchun Sun The Journal of Prosthetic Dentistry 129 (1), 174-180, 2023-01

DOI Web Site Web Site 被引用文献1件

Sasaki Masanao, Kuroiwa Masahide, Kishikawa Sam, Okahashi Kazunari, Nakamura Takao, Sato Keigo 日本表面真空学会学術講演会要旨集 2023 (0), 1Ia03-, 2023

...CF flanges with this NiP plating reliability of the gasket is extremely high, and even after repeated baking at 250°C, no peeling of the plating or knife edge defects will occur....

DOI

皆木, 渓夏, 柳瀬, 創平, 富田, 晋伍, 水谷, 圭一, 原田, 博司 IEEE Open Journal of Vehicular Technology 4 12-24, 2022-10-19

...This additional margin, called location gain, is a location-dependent value that accounts for knife-edge losses calculated from topographic information....

HANDLE

桐原 聡秀 Journal of Smart Processing 11 (4), 171-174, 2022-07-10

...The resin paste was spread on a glass substrate with 50 μm in layer thickness by a mechanically moved knife edge....

DOI Web Site 参考文献16件

Camille Haddad, Kathy Azzi European Journal of General Dentistry 11 (02), 073-080, 2022-05

...Monolithic zirconia crowns with a knife-edge margin have shown a breaking load higher than the maximum chewing force of humans....

DOI PDF 被引用文献1件

Daisuke Wakabayashi, Yoshio Suzuki, Yuki Shibazaki, Hiroshi Sugiyama, Keiichi Hirano, Ryutaro Nishimura, Kazuyuki Hyodo, Noriyuki Igarashi, Nobumasa Funamori Review of Scientific Instruments 93 (3), 033701-, 2022-03-01

...By inserting a knife edge at an appropriate position in the optical system, a phase-contrast image can be easily obtained, which is useful for soft-tissue observation of biological samples.</jats:p>...

DOI PDF 被引用文献1件 参考文献15件

Daniel Toker, Ioannis Pappas, Janna D. Lendner, Joel Frohlich, Diego M. Mateos, Suresh Muthukumaraswamy, Robin Carhart-Harris, Michelle Paff, Paul M. Vespa, Martin M. Monti, Friedrich T. Sommer, Robert T. Knight, Mark D’Esposito Proceedings of the National Academy of Sciences 119 (7), 2022-02-10

...One possibility is that the loss of consciousness corresponds to a transition of the brain’s electric activity away from edge-of-chaos criticality, or the knife’s edge in between stability and chaos....

DOI Web Site Web Site 被引用文献1件

吉田 史郎, 佐藤 令季, 本田 健吾 計算力学講演会講演論文集 2022.35 (0), 22-08-, 2022

...<p>When materials are cut with a knife, cutting resistance is a combination of (1) the reaction force (compressive) and (2) the frictional force between the knife edge and materials....

DOI Web Site

沼澤 美詠 日本補綴歯科学会誌 14 (1), 73-76, 2022

<p><b>症例の概要</b>：患者は67歳女性．下顎全部床義歯の動揺による咀嚼困難を主訴に来院した．下顎の顎堤は骨吸収によりヒモ状を呈しており，<span style="text-decoration: overline;">|12</span> の動揺によりオーバーデンチャーの維持は不良であった．<span style="text-decoration: …

DOI Web Site Web Site ほか1件 参考文献5件

井本 伸 尾道市立大学経済情報論集 21 (1), 25-34, 2021-07-15

application/pdf

DOI 機関リポジトリ Web Site

Ryota Kakinuma, Norikazu Kawagishi, Masaki Yasugi, Hirotsugu Yamamoto OSA Continuum 4 (3), 865-, 2021-02-25

...Using three different types of retro-reflectors inside the AIRR system, we measure the aerial image modulation transfer function (MTF) via the slanted knife edge method, showing that the resolution of...

DOI Web Site Web Site 被引用文献3件 参考文献16件

吉田 史郎, 佐藤 令季 計算力学講演会講演論文集 2021.34 (0), 137-, 2021

...<p>When materials are cut with a knife, cutting resistance is a combination of (1) the reaction force (compressive) and (2) the frictional force between the knife edge and materials....

DOI Web Site

ITO Motoo, OKADA Tatsuaki, KEBUKAWA Yoko, AOKI Jun, KAWAI Yosuke, MATSUMOTO Jun, CHUJO Toshihiro, NAKAMURA Ryosuke, YANO Hajime, YOKOTA Sho-ichiro, TOYODA Michisato, YURIMOTO Hisayoshi, WATANABE Motoki, IKEDA Ryota, KUBO Yuki, GRAND Noel, COTTIN Herve, BUCH Arnaud, SZOPA Cyril, MORI Osamu TRANSACTIONS OF THE JAPAN SOCIETY FOR AERONAUTICAL AND SPACE SCIENCES, AEROSPACE TECHNOLOGY JAPAN 19 (4), 477-484, 2021

...Current performances are (1) high mass resolution was 30,000 at m/z = 20, (2) sample canister system with a knife-edge metal seal kept 90 % of a released gas in 1 hour for Cu or Au gaskets with/without...

DOI Web Site 参考文献18件

三田 夏大, 大宮 正毅, 渡邊 慎吾 日本機械学会論文集 87 (900), 21-00105-21-00105, 2021

...In order to increase test frequency and obtain repeatable test results for 108 cycles, the design of fixed block jigs was improved and the tolerance of the knife edge shaper was restricted....

DOI Web Site 被引用文献1件 参考文献6件

Norikazu Kawagishi, Ryota Kakinuma, Hirotsugu Yamamoto Optics Express 28 (24), 35518-, 2020-11-09

...In order to explore this, we simulate blurred slanted knife edge images by convolving two types of blur functions....

DOI Web Site Web Site 被引用文献8件 参考文献13件

Sotaro Sugawara, Shinichiro Nakao, Yoshiaki Miyazato, Yojiro Ishino, Kenji Miki Flow, Turbulence and Combustion 106 (3), 971-992, 2020-08-26

...In addition, the density field of the microjet is illustrated with various techniques, including representation such as the vertical-knife-edge schlieren, the horizontal-knife-edge schlieren, the bright-field...

DOI PDF Web Site 被引用文献3件 参考文献38件

柿沼 遼太, 川岸 功和, 山本 裕紹 応用物理学会学術講演会講演予稿集 2020.2 (0), 834-834, 2020-08-26

DOI

Nami Nakamura, Satoshi Matsuyama, Takato Inoue, Ichiro Inoue, Jumpei Yamada, Taito Osaka, Makina Yabashi, Tetsuya Ishikawa, Kazuto Yamauchi Journal of Synchrotron Radiation 27 (5), 1366-1371, 2020-08-17

...applied to the sub-micrometre focused XFEL beam at the SPring-8 Angstrom Compact Free Electron Laser, and the beam size evaluated using the proposed method was consistent with that measured using the knife-edge...

DOI PDF 参考文献30件

清水 那弥, 桐原 聡秀 Journal of Smart Processing 9 (4), 190-193, 2020-07-10

...The composite resin with woodchips dispersion were spread on a substrate by using a mechanical knife edge....

DOI Web Site Web Site 被引用文献1件 参考文献8件

Zhen-Ze Li, Lei Wang, Hua Fan, Yan-Hao Yu, Qi-Dai Chen, Saulius Juodkazis, Hong-Bo Sun Light: Science & Applications 9 (1), 2020-03-16

...The writing is initiated from nanoholes created by femtosecond-laser-induced multiphoton absorption, and its cutting “knife edge” is sharpened by the far-field-regulated enhancement of the optical near...

DOI PDF Web Site 被引用文献3件

李 英根, 北澤 聡, リケッシュ パテル 応用物理学会学術講演会講演予稿集 2020.1 (0), 424-424, 2020-02-28

DOI

渡辺 紀生, 青木 貞雄 応用物理学会学術講演会講演予稿集 2020.1 (0), 1499-1499, 2020-02-28

DOI

Dooyoung Hah Applied Optics 59 (2), 277-, 2020-01-06

...Devices of interest are planar VOAs based on microelectromechanical systems technology, with either a knife-edge shutter or a reflector....

DOI Web Site 被引用文献1件

福永 諒汰, 仲尾 晋一郎, 宮里 義昭, 石野 洋二郎 流体工学部門講演会講演論文集 2020 (0), OS03-33-, 2020

...The flow feature on cross-section including the central axis of the microjet is demonstrated using various visual representations such as the vertical knife-edge schlieren, the horizontal knife-edge schlieren...

DOI Web Site

蘆川 健一郎, 高橋 聖幸, Tran Duc Thuan, 森 浩一, 大西 直文 宇宙太陽発電 5 (0), 56-59, 2020

<p>　レーザー推進機体は，外部から推進エネルギーを得る機体の性質上，レーザーの照射範囲内に機体を保ち続けるビームライディング性能が求められる. 本研究では，その性能の向上を目的とした複数放物面機体という新しい形状の機体を提案し，その機体評価のためにナイフエッジ軸受を支点に用いた力積測定装置を開発し，機体が獲得する推力やセンタリング力による力積の測定を試みる.</p>

DOI

新井 健太 日本表面真空学会学術講演会要旨集 2020 (0), 95-, 2020

<p>真空用ナイフエッジ型フランジは、真空装置の締結用に国内外で幅広く使用されている。しかし、歴史的な経緯から、現時点ではJVIS、ISO、ASTMが並列している。JVIS-ISO間については既に互換性は調査されている。今回、将来のJIS化を踏まえ、対象をASTMにまで広げてフランジ間の互換性を調査した。その結果、一部呼び径において注意が必要だが概ね寸法上の互換性があることがわかった。</p>

DOI

Kawagishi Norikazu, Kakinuma Ryota, Yamamoto Hirotsugu Proceedings of the International Display Workshops 746-, 2019-11-28

DOI

Kawagishi Norikazu, Kakinuma Ryota, Yamamoto Hirotsugu Proceedings of the International Display Workshops 746-, 2019-11-28

DOI

Akari Noda, Masanobu Abe, Aya Shinozaki-Ushiku, Yae Ohata, Liang Zong, Takahiro Abe, Kazuto Hoshi Case Reports in Dentistry 2019 1-4, 2019-09-03

...The root of the 2nd premolar showed knife-edge resorption. Although the 1st premolar was nonvital, the 2nd premolar was a vital tooth....

DOI PDF XML 参考文献16件

Kenta Suzuki, Kenichi Oguchi, Yasuaki Monnai, Makoto Okano, Shinichi Watanabe Applied Physics Express 12 (5), 052010-, 2019-04-10

DOI Web Site Web Site ほか2件 参考文献30件

Vladislav Volarevic, Bojana Djokovic, Marina Gazdic Jankovic, C. Randall Harrell, Crissy Fellabaum, Valentin Djonov, Nebojsa Arsenijevic Journal of Biomedical Science 26 (1), 25-, 2019-03-13

DOI PDF Web Site 被引用文献3件

渡辺 紀生, 青木 貞雄 応用物理学会学術講演会講演予稿集 2019.1 (0), 1536-1536, 2019-02-25

DOI

李 英根, 北澤 聡, リケッシュ パテル, ロジャー ライト 応用物理学会学術講演会講演予稿集 2019.1 (0), 400-400, 2019-02-25

DOI

Monaco C., Arena A., Štelemekaite J., Evangelisti E., Baldissara P. Journal of Prosthodontic Research 63 (2), 173-178, 2019

...</p><p><i>Methods:</i> A total of 80 molar resin teeth and 8 preparation finishing lines were chosen: 1 for metal ceramic crowns (MCC); 3 for zirconia all-ceramic crowns: knife edge (ZirKnE), chamfer (...

DOI Web Site Web Site ほか2件 被引用文献1件 参考文献23件

桑村 仁 日本建築学会構造系論文集 84 (762), 1115-1121, 2019

...The flat bar is welded at both ends to a circular plate bolt-connected to a knife-edge block in order to alter the oblique angle between the knife-edge direction and the weak axis....

DOI Web Site Web Site 参考文献1件

Arena A., Baldissara P., Ciocca L., Scotti R., Monaco C. Journal of Prosthodontic Research 63 (1), 100-104, 2019

...</p><p><i>Methods:</i> A knife-edge preparation and a chamfer preparation were made on upper premolars. The teeth were scanned and two Co–Cr alloy replicas were made....

DOI Web Site Web Site ほか2件 参考文献24件

E. Gumbrell, J. M. McNaney, C. M. Huntington, A. G. Krygier, H.-S. Park Review of Scientific Instruments 89 (10), 10G118-, 2018-10-01

...We also find that the MTF is sensitive both to the thickness of the line-projection slit and to the backing material thickness under the knife-edge....

DOI PDF Web Site 被引用文献1件

伊藤 優希, 岩井 誠人, 笹岡 秀一 J101-B (9), 696-705, 2018-09-01

本論文では，室内において送受信点間が人体により遮蔽される環境における人体遮蔽損失特性を実測，FDTD計算，ナイフエッジ回折により求めた．単一人体環境及び複数人体環境の二環境を評価対象とした．単一人体環境においては，人体により第1フレネルゾーンが約22%以上遮蔽されると受信レベルが3 dB以上低下することを示した．複数人体環境においては，伝搬損失の累積分布において遮蔽特性が変化する点(変化点)が生…

DOI

李 英根, 北澤 聡 応用物理学会学術講演会講演予稿集 2018.1 (0), 537-537, 2018-03-05

DOI

Laurie J. Points, James Ward Taylor, Jonathan Grizou, Kevin Donkers, Leroy Cronin Proceedings of the National Academy of Sciences 115 (5), 885-890, 2018-01-16

...edge between stability and instability....

DOI Web Site Web Site 被引用文献3件

John West 2018

DOI PDF Web Site 被引用文献1件

Domenico Baldi, Teresa Lombardi, Jacopo Colombo, Gabriele Cervino, Giuseppe Perinetti, Roberto Di Lenarda, Claudio Stacchi BioMed Research International 2018 1-7, 2018

...To evaluate the correlation between insertion torque (IT) and implant stability quotient (ISQ) in tapered implants with knife-edge threads.<jats:italic>Methods</jats:italic>....

DOI PDF XML 被引用文献1件

Alharbi Nawal, Alharbi Saud, Cuijpers Vincent M.J.I., Osman Reham B., Wismeijer Daniel Journal of Prosthodontic Research 62 (2), 218-226, 2018

...Four groups were defined; knife-edge (KE), chamfer (C), rounded-shoulder (RS), rounded-shoulder with bevel (RSB). All preparations were digitally scanned....

DOI Web Site Web Site ほか2件 被引用文献5件 参考文献35件

木佐貫 祥一郎, 桐原 聡秀 Journal of Smart Processing 7 (6), 238-242, 2018

...Photosensitive acrylic resin including with the ceramics particles were spread on a substrate by using a mechanical knife edge....

DOI Web Site Web Site 参考文献8件

野崎 浩寿, 桐原 聡秀 Journal of Smart Processing 7 (6), 233-237, 2018

....% were spread on a metal substrate by a knife edge, and an ultra violet laser beam was scanned to create a two-dimensional cross section....

DOI Web Site Web Site 被引用文献1件 参考文献9件

Seongkyul Jeon, Christopher K. Stepanick, Abolfazl A. Zolfaghari, ChaBum Lee Precision Engineering 50 354-360, 2017-10

DOI Web Site Web Site 被引用文献1件

Chen Wang, Fenghe Zhong, Jonathan D. Ellis Review of Scientific Instruments 88 (9), 2017-09-01

...This paper presents a two-dimensional (2D) straightness measurement configuration based on 2D optical knife-edge sensing, which is simple, light-weight, compact, and easy to align....

DOI PDF Web Site 被引用文献1件

Akihisa Takeuchi, Kentaro Uesugi, Yoshio Suzuki, Seiichi Itabashi, Masatoshi Oda Journal of Synchrotron Radiation 24 (3), 586-594, 2017-04-03

...</jats:italic> a circular type and a one-dimensional type, have been evaluated by using a microbeam knife-edge scan test, and have been carefully compared with those of normal FZP optics....

DOI PDF 被引用文献7件

B. Lazareff, J.-P. Berger, J. Kluska, J.-B. Le Bouquin, M. Benisty, F. Malbet, C. Koen, C. Pinte, W.-F. Thi, O. Absil, F. Baron, A. Delboulbé, G. Duvert, A. Isella, L. Jocou, A. Juhasz, S. Kraus, R. Lachaume, F. Ménard, R. Millan-Gabet, J. D. Monnier, T. Moulin, K. Perraut, S. Rochat, F. Soulez, M. Tallon, E. Thiébaut, W. Traub, G. Zins Astronomy & Astrophysics 599 A85-, 2017-03

...A wide ring favors a rim that, on the star-facing side, looks more like a knife edge than a doughnut....

DOI Web Site 被引用文献4件

鈴木 良祐, 鏑木 哲志, 中本 純平, 松原 雅昭 年次大会 2017 (0), G0300503-, 2017

...Reasonable damping hardness of the knife edge of the vegetable knife can be obtained, although a knife edge is special shape as specimen....

DOI Web Site

森 寛爾 色材協会誌 90 (3), 102-105, 2017

<p>溶剤型クリアを水性ベース上に積層して一括焼付けすると，ベース層に含有されるアミンが焼付け中に移動してクリア層の硬化速度に影響するか調べた。硬化速度は，ナイフエッジを支点とし，試料膜と接した状態で振動する剛体振り子の運動から粘弾性を測定する振り子式粘弾性測定装置で評価した。測定原理に基づいて各層の寄与を見積もった結果，上記装置の測定結果は実質的にクリア層のみの硬化挙動をあらわすことがわかった…

DOI Web Site Web Site 被引用文献1件 参考文献1件

鈴木 良祐, 井上 洋介, 中村 昌義, 鏑木 哲志, 萩原 司, 藤本 博之, 丸橋 悠, 松原 雅昭 茨城講演会講演論文集 2017.25 (0), 201-, 2017

...Reasonable damping hardness of the knife edge of the vegetable knife can be obtained, although a knife edge is special shape as specimen....

DOI Web Site

N. Guler, P. Volegov, A. Favalli, F. E. Merrill, K. Falk, D. Jung, J. L. Tybo, C. H. Wilde, S. Croft, C. Danly, O. Deppert, M. Devlin, J. Fernandez, D. C. Gautier, M. Geissel, R. Haight, C. E. Hamilton, B. M. Hegelich, D. Henzlova, R. P. Johnson, G. Schaumann, K. Schoenberg, M. Schollmeier, T. Shimada, M. T. Swinhoe, T. Taddeucci, S. A. Wender, G. A. Wurden, M. Roth Journal of Applied Physics 120 (15), 154901-, 2016-10-17

...The spot size of neutron emission at the converter was measured by two different imaging techniques, using a knife-edge and a penumbral aperture, in two different experimental campaigns....

DOI PDF Web Site 被引用文献3件

George R. MacCartney, Sijia Deng, Shu Sun, Theodore S. Rappaport 2016 IEEE 84th Vehicular Technology Conference (VTC-Fall) 2016-09

DOI PDF 被引用文献4件

Carl Ziegler, Nicholas M. Law, Andrei Tokovinin Adaptive Optics Systems V 2016-07-27

DOI 被引用文献1件

Yudhishthir Kandel, Gregory Denbeaux Japanese Journal of Applied Physics 55 (8), 086701-, 2016-07-11

...A common method is to scan an electron beam across a knife edge along many angles to give an approximate measure of the beam profile, however such scans are not easy to obtain in all systems....

DOI Web Site Web Site ほか2件 参考文献23件

Kazunobu Muro Macroeconomic Dynamics 21 (2), 406-438, 2016-07-07

...Because the prices of agricultural goods and services are determined endogenously, the CGP condition is no longer the knife-edge condition....

DOI Web Site 参考文献35件

C. Huber, S. Orlov, P. Banzer, G. Leuchs Optics Express 24 (8), 8214-, 2016-04-07

DOI Web Site 被引用文献1件

森川 治, 山本 晃司, 谷 正彦, 栗原 一嘉, 桒島 史欣 応用物理学会学術講演会講演予稿集 2016.1 (0), 892-892, 2016-03-03

DOI

C. Richter, G. Pausch, S. Barczyk, M. Priegnitz, I. Keitz, J. Thiele, J. Smeets, F. Vander Stappen, L. Bombelli, C. Fiorini, L. Hotoiu, I. Perali, D. Prieels, W. Enghardt, M. Baumann Radiotherapy and Oncology 118 S89-S90, 2016-02

DOI Web Site Web Site 被引用文献1件

Norio Watanabe, Yuji Tsuburaya, Akihiro Shimada, Sadao Aoki AIP Conference Proceedings 2016

DOI 参考文献4件

北 直樹 映像情報メディア学会誌 70 (7), 603-608, 2016

DOI Web Site Web Site 参考文献2件

Ting Wang, Masahiro Umehira, Hiroyuki Otsu, Shigeki Takeda, Teruyuki Miyajima, Kenichi Kagoshima IEICE Proceeding Series 28 188-192, 2015-10-14

...With this motivation, this paper proposes a twin cylinder model for moving human body shadowing in 60GHz WLAN, where three knife edges for diffraction loss calculation are derived from geometrical positions...

DOI

Kolle E. Thomas, Hugo Vazquez‐Lima, Yuanyuan Fang, Yang Song, Kevin J. Gagnon, Christine M. Beavers, Karl M. Kadish, Abhik Ghosh Chemistry – A European Journal 21 (47), 16839-16847, 2015-09-08

...Uniquely among metallocorroles, silver corroles thus seem poised on a knife‐edge, so to speak, between innocent and noninnocent electronic structures and may tip either way, depending on the exact nature...

DOI Web Site Web Site 被引用文献5件

Akihisa Takeuchi, Yoshio Suzuki, Kentaro Uesugi Japanese Journal of Applied Physics 54 (9), 092401-, 2015-08-28

DOI Web Site Web Site 参考文献15件

Patricia Cambraia Lopes, Enrico Clementel, Paulo Crespo, Sebastien Henrotin, Jan Huizenga, Guillaume Janssens, Katia Parodi, Damien Prieels, Frauke Roellinghoff, Julien Smeets, Frederic Stichelbaut, Dennis R Schaart Physics in Medicine and Biology 60 (15), 6063-6085, 2015-07-28

DOI Web Site Web Site 被引用文献4件

Charlotte Jensen, Gerry M. Raghoebar, Henny J.A. Meijer, Rutger Schepers, Marco S. Cune Clinical Implant Dentistry and Related Research 18 (4), 678-685, 2015-07-14

...In all cases of misclassification, a critical bone height, or an unclear course of the mandibular nerve or a knife edge ridge was present....

DOI Web Site Web Site 被引用文献1件

Nikola Vladov, Joel Segal, Svetan Ratchev Journal of Vacuum Science & Technology B, Nanotechnology and Microelectronics: Materials, Processing, Measurement, and Phenomena 33 (4), 2015-07-01

...Traditional methods of measuring the beam size, like the knife edge method, provide information about the quality of the beam itself, but practically, they do not give information on the FIB sputtering...

DOI PDF 被引用文献1件

M Priegnitz, S Helmbrecht, G Janssens, I Perali, J Smeets, F Vander Stappen, E Sterpin, F Fiedler Physics in Medicine and Biology 60 (12), 4849-4871, 2015-06-09

DOI Web Site Web Site 被引用文献5件

ALI Maifuz, ANDO Makoto IEICE Transactions on Communications E98.B (9), 1873-1881, 2015

...It adopts classical Keller-type knife-edge diffraction coefficients and still provides uniform and highly accurate fields everywhere including geometrical boundaries....

DOI Web Site 被引用文献2件 参考文献9件

TRAN Ngochao, IMAI Tetsuro, OKUMURA Yukihiko IEICE Transactions on Communications E98.B (5), 773-782, 2015

...Then, the general forms of the formulas are predicted using the theory of knife-edge diffraction (KE)....

DOI Web Site 被引用文献2件 参考文献6件

池内 真志, 豊田 悠司, 林 衆治, 生田 幸士 生体医工学 53 (Supplement), S236_01-S236_01, 2015

...The top of the wall separating microwells forms knife-edge so that each cell falls into any one of the microwells. The surface is modified with hydrophilic polymer to prevent cell adhesion....

DOI

玉置 司, 岡田 晃, 植村 賢介, 宇野 義幸, 高木 利樹 精密工学会誌 81 (5), 446-451, 2015

Forming the cutting edge of stainless steel cutlery is generally carried out by grinding wheel and polishing with leather strop. Nanometer-level shape controllability of the edge in the polishing …

DOI

KIRIHARA Soshu Journal of the Ceramic Society of Japan 123 (1441), 816-822, 2015

...Photosensitive acrylic resin containing alumina nanoparticles was spread on a glass substrate with a mechanical knife edge....

DOI Web Site 被引用文献5件 参考文献24件

奈良崎 道治, 虻川 文隆, 横田 秀雄 熱処理 55 (1), 50-56, 2015

片側ナイフエッジ鋼試片の浸炭焼入れ実験とその数値シミュレーションによって，焼入冷却方法が変形に及ぼす影響を検討した結果，以下の知見が得られた。<br/>（1）浸炭焼入れ後の試片の曲がり形状は焼入れ時の冷却方法に強く依存し，油焼入れではナイフエッジ側は凸状に，ガス焼入れでは凹状に変形することを確かめた。<br/>（2）数値シミュレーション結果より，ガス冷の場合は試片内部に塑性ひずみは生じないが，油…

DOI Web Site

今枝 航大, 別所 克彦, 三宅 力, 式田 光宏 年次大会 2015 (0), _J2220206--_J2220206-, 2015

...We evaluated the penetration performanceof eight-sided and rounded knife-edge Si pyramids, as a shape of the tip structure....

DOI Web Site

高 一 アジア太平洋研究 = Review of Asian and Pacific Studies 39 57-66, 2014-11

type:Article

DOI 機関リポジトリ Web Site

Davide Cortellini, Angelo Canale, Rodrigo O.A. Souza, Fernanda Campos, Julia C. Lima, Mutlu Özcan Journal of Prosthodontics 24 (8), 615-619, 2014-10-15

...Materials and Methods</jats:title><jats:p>Pressed lithium disilicate all‐ceramic molar crowns were bonded (Variolink II) to epoxy abutments (height: 5.5 mm, Ø: 7.5 mm, conicity: 6°) (N = 20) with either knife‐edge...

DOI Web Site Web Site 被引用文献2件

Qin, Yu, 中嶋, 隆, Zen, Heishun, Wang, Xiaolong, Kii, Toshiteru, Ohgaki, Hideaki Infrared Physics & Technology 66 146-151, 2014-09

...From the knife-edge data we find that the FEL beam has a non-Gaussian shape....

DOI HANDLE Web Site ほか1件 参考文献17件

前神 有里子, 武井 亮平, 眞子 祥子, 面田 恵美子, 佐々木 美紀子, 浮田 茂也, 天野 建, 森 雅彦, 亀井 利浩, 榊原 陽一 応用物理学会学術講演会講演予稿集 2014.1 (0), 1083-1083, 2014-03-03

DOI

Tamara Kerber Tedesco, Eugenio Jose Garcia, Fabio Zovico Maxnuck Soares, Rachel de Oliveira Rocha, Rosa Helena Miranda Grande Brazilian Dental Journal 24 (6), 605-609, 2013-12

...The microshear testing was performed after storage in water (24 h/37 °C) using two devices for application of microshear loads: a notched rod (Bisco Shear Bond Tester) or a knife edge (Kratos Industrial...

DOI PDF 被引用文献1件

Kitahara Soshu Transactions of JWRI 42 (2), 1-4, 2013-12

...The paste material was spread on a glass substrate with 10μm layer thickness by using mechanical knife edge movements, and an ultra violet micro pattern was exposed on the surface to create a cross sectional...

DOI HANDLE

Atsushi Ohbuchi, Takayuki Konya, Go Fujinawa Powder Diffraction 28 (4), 249-253, 2013-11-07

...A variable knife edge was used as a countermeasure for unwanted scattering, particularly in the low angle range. With this system, cement may be analyzed within 5 min....

DOI Web Site 被引用文献1件

N Watanabe, J Hashizume, M Goto, M Yamaguchi, T Tsujimura, S Aoki Journal of Physics: Conference Series 463 012011-, 2013-10-25

DOI Web Site Web Site 被引用文献1件

C. Huber, S. Orlov, P. Banzer, G. Leuchs Optics Express 21 (21), 25069-, 2013-10-14

DOI Web Site 被引用文献1件

Kazuma Kurihara, Osamu Nagumo, Seiichi Takamatsu, Hideki Takagi, Ryutaro Maeda Japanese journal of applied physics : JJAP 52 (10), 106701-, 2013-10

...We confirmed that a high-throughput fabrication lasting less than 30 s could be obtained by using a mold with a knife edge....

DOI Web Site Web Site ほか1件 参考文献23件

T. J. Tipnis, M. V. Finnis, K. Knowles, D. Bray The Aeronautical Journal 117 (1194), 771-785, 2013-08

...This technique is easier to set up than conventional schlieren since the optical alignment involving the various mirrors, lenses and knife-edge is replaced by a background pattern and a single digital...

DOI Web Site 被引用文献1件

Yuji Shimokawa, Keiji Sakai Physical Review E 87 (6), 063009-, 2013-06-17

DOI Web Site Web Site 被引用文献3件 参考文献18件

Katsuhiko Bessho, Chikara Miyake, Mitsuhiro Shikida 2013 Transducers & Eurosensors XXVII: The 17th International Conference on Solid-State Sensors, Actuators and Microsystems (TRANSDUCERS & EUROSENSORS XXVII) 2013-06

DOI PDF 被引用文献2件

Mario González-Cardel, Pedro Arguijo, Rufino Díaz-Uribe Applied Optics 52 (16), 3849-, 2013-05-31

DOI Web Site 被引用文献2件

Norman Sedgley, Bruce Elmslie Macroeconomic Dynamics 17 (5), 1118-1134, 2013-03-11

...The stability of the steady state path is found to be determined by the inequality and/or knife-edge restrictions needed to produce steady state growth....

DOI Web Site 被引用文献1件

R. Takei, M. Suzuki, E. Omoda, S. Manako, T. Kamei, M. Mori, Y. Sakakibara Applied Physics Letters 102 (10), 101108-, 2013-03-11

...<jats:p>For ultralow-loss and polarization-insensitive spot-size converters (SSCs) on a silicon platform, we propose and demonstrate a silicon knife-edge taper waveguide with a gradual decrease in height...

DOI PDF 被引用文献7件

Miura, Noriaki, Oh-ishi, Ayumu, Shionoya, Shingo, Watanabe, Koji, Kuwamura, Susumu, Baba, Naoshi, Ueno, Satoru, Ichimoto, Kiyoshi Monthly Notices of the Royal Astronomical Society 434 (2), 1205-1219, 2013

...A knife-edge effect caused by field stops in an observational system is also described, which yields another peak at the centre of the correlation plane....

機関リポジトリ

K. Ploykrachang, H. Fukuda, K. Kondo, Y. Oguri, J. Hasegawa International Journal of PIXE 23 (01n02), 1-11, 2013-01

...The focal spot size of the focused X-ray beam was 250 μm at full width at half maximum, which was verified using a knife-edge scanning method....

DOI Web Site 参考文献14件

中西 栄徳, 青木 誠, 多原 幸宏, 牧 清二郎 砥粒加工学会誌 57 (9), 605-609, 2013

本研究では，ナイフ状の刃物を用いて塩化ビニル製パイプの切断加工実験をおこない，刃先形状の変化と切断荷重の関係を評価した．その結果，刃先丸みや先端部に施す刃付けの角度を小さくすることで切断荷重も小さくなることを明らかにし，さらに切断時において刃物と樹脂との間に発生する摩擦力が切断力に対して大きな割合を示すことを明らかにした．また，刃先表面に施す研磨方向と摩擦力との関係を調べ，研磨方向と摩擦方向とが…

DOI Web Site 参考文献4件

加賀 忠士, 社本 英二 精密工学会誌 79 (12), 1251-1257, 2013

...The present paper deals with experiment and analysis of hole machining of plastic with a sharp knife edge tool....

DOI Web Site

Borelli Bruna, Sorrentino Roberto, Goracci Cecilia, Zarone Fernando, Ferrari Marco Ｊｏｕｒｎａｌ　ｏｆ　Ｏｒａｌ　Ｓｃｉｅｎｃｅ 55 (1), 79-84, 2013

...In each group, specimens were randomly divided and prepared for single-crown coverage with shoulder (SHO, <i>n</i> = 10, control), slight chamfer (CHA, <i>n</i> = 10), and knife-edge (KNE, <i>n</i> = 10...

DOI Web Site PubMed ほか1件 参考文献28件

高橋 勉, 渡邉 達弥 年次大会 2013 (0), _S051044-1-_S051044-4, 2013

...In the case of the applicators that have a knife-edge shaped back wall, the velocity distribution on the surface of the meniscus region is not affected by the gap of the application area....

DOI Web Site

南 航司, 石川 将人, 大須賀 公一 ロボティクス・メカトロニクス講演会講演概要集 2013 (0), _2A1-P13_1-_2A1-P13_3, 2013

...It consists of a base-link and three links having a free wheel or knife edge like a fin. And each link is connected to the base-link by a linear joint....

DOI Web Site

別所 克彦, 三宅 力, 式田 光宏 マイクロ・ナノ工学シンポジウム 2013.5 (0), 235-236, 2013

...We evaluated the penetration performance of the fabricated knife-edged structures into an artificial skin of a silicone rubber sheet and confirmed that both the Si and biodegradable knife-edged structures...

DOI Web Site

Kirihara Soshu, Nakano Maasa Transactions of JWRI 41 (2), 19-22, 2012-12

...edge, and two dimensional images of UV ray were exposed with 2 μm in part accuracy....

DOI HANDLE

Kerry B. Burke, Erik J. Luber, Natalie P. Holmes, Andrew J. Murray, Warwick J. Belcher, Xiaojing Zhou, David Mitlin, Paul C. Dastoor Journal of Electron Spectroscopy and Related Phenomena 185 (11), 453-457, 2012-11

DOI Web Site Web Site 被引用文献1件

G. Fiksel, F. J. Marshall, C. Mileham, C. Stoeckl Review of Scientific Instruments 83 (8), 086103-, 2012-08-01

...<jats:p>The spatial resolution of two types of imaging plates, Fuji BAS-TR and Fuji BAS-SR, has been measured using a knife-edge x-ray source of 8-keV Cu Kα radiation....

DOI PDF 被引用文献2件

Carlo E. Poggio, Riccardo Dosoli, Carlo Ercoli The Journal of Prosthetic Dentistry 107 (5), 316-321, 2012-05

DOI Web Site Web Site 被引用文献2件

Jaeho Choi, Yong-Sung Park Applied physics express : APEX 5 (4), 042503-, 2012-04

DOI Web Site Web Site 参考文献42件

Photon Factory Activity Repor 2011 #29 2012

Web Site

SUGITA Yu, TAKASAKI Yoshifumi, KURODA Keiji, YOSHIKUNI Yuzo IEICE Transactions on Electronics E95.C (4), 761-764, 2012

A Fourier domain optical coherence tomography system for obtaining a two-dimensional image is constructed. Imaging characteristics of the OCT system in a transverse direction are experimentally …

DOI Web Site BIBCODE 参考文献12件

玉置 司, 岡田 晃, 植村 賢介, 宇野 義幸 精密工学会学術講演会講演論文集 2012S (0), 99-100, 2012

ステンレス製ナイフエッジのバリ取り研磨仕上げ加工について，従来の皮砥に代わる方法としてイオンビーム照射による加工方法を検討した．エッジに対して照射角度を変化させてイオンビームを照射し，刃先がどのように加工されるかをSEM観察と形状測定により評価した．その結果，バリの除去は十分に可能であり，イオンビームの照射角度によって刃先先端角度を制御できることが判明した．

DOI

Victor Bom, Leila Joulaeizadeh, Freek Beekman Physics in Medicine and Biology 57 (2), 297-308, 2011-12-09

DOI 被引用文献5件

K. Shao, A. Morisset, V. Pouget, E. Faraud, C. Larue, D. Lewis, D. McMorrow Optics Express 19 (23), 22594-, 2011-10-25

DOI Web Site 被引用文献1件

Motoharu SASAKI, Wataru YAMADA, Toshio ITO, Naoki KITA, Takatoshi SUGIYAMA IEICE Proceeding Series 53 WeE2-2-, 2011-10-25

...A double knife-edge diffraction model shows that over-roof propagation loss can be accurately estimated. Measurement results confirm the estimation accuracy of the new model....

DOI

Shigeru Nagasawa, Yuuya Masaki, Masatoshi Fujikura, Nopparat Lukkanasirikul, Yasushi Fukuzawa Machining Science and Technology 15 (1), 110-131, 2011-04-13

DOI Web Site 被引用文献5件 参考文献4件

Akifumi Koike, Yasuo Takagi, Takahiro Fujino, Toru Aoki, Y. Neo, Hidenori Mimura, Tomoya Yoshida, Masayoshi Nagao, Kentaro Sakai, Hidekazu Murata Advanced Materials Research 222 94-97, 2011-04

...<jats:p>A crossover point was observed with a fabricated quintuple-gated micro-column by an enhanced knife-edge measurement....

DOI PDF 参考文献4件

P. Marchenko, S. Orlov, C. Huber, P. Banzer, S. Quabis, U. Peschel, G. Leuchs Optics Express 19 (8), 7244-, 2011-03-31

DOI Web Site 被引用文献1件

Paolo Russo, Assunta S. Curion, Giovanni Mettivier, Michela Esposito, Michela Aurilio, Corradina Caracò, Luigi Aloj, Secondo Lastoria Medical Physics 38 (3), 1547-1560, 2011-02-24

...The imaging probe is equipped with a set of three interchangeable knife‐edge pinhole collimators (0.94, 1.2, or 2.1 mm effective diameter at 140 keV) and its focal distance can be regulated in order to...

DOI Web Site Web Site 被引用文献1件

N. Watanabe, T. Sasaya, Y. Imai, S. Iwata, K. Zama, S. Aoki, Ian McNulty, Catherine Eyberger, Barry Lai AIP Conference Proceedings 1365 313-, 2011

DOI 被引用文献3件

Guijun Bi, Andres Gasser Physics Procedia 12 402-409, 2011

DOI Web Site Web Site 被引用文献1件

深津 拡也, 岡 和彦, 柳 和久 精密工学会誌 77 (4), 428-432, 2011

...Based on a knife-edge optical displacement sensor, the intensity distribution in a detector plane reflected from an irradiated surface spot with micro-geometry was theoretically analyzed using the point...

DOI Web Site 参考文献2件

大石 真也, 小路 正純, 岡安 雄一, 谷内 友希子, 米原 博人, 大熊 春夫 Ｊｏｕｒｎａｌ　ｏｆ　ｔｈｅ　Ｖａｃｕｕｍ　Ｓｏｃｉｅｔｙ　ｏｆ　Ｊａｐａｎ 54 (3), 158-161, 2011

...  A lot of aluminum (A2219-T852) flanges with a knife-edge seal have been used at the SPring-8 storage ring....

DOI Web Site 参考文献3件

NAKANISHI Eitoku, MAKI Seijiro, AOKI Makoto Abstracts of ATEM : International Conference on Advanced Technology in Experimental Mechanics : Asian Conference on Experimental Mechanics 2011.10 (0), _OS12-6-4--, 2011

DOI Web Site

矢吹 彰広, 奥野 弘尚 軽金属 61 (12), 724-728, 2011

...conversion coating and polymer coating, which are various primer and top coatings with a thickness of 5 and 11 μm, were applied to the surface of pure aluminum, and after creating a defect by means of a knife-edge...

DOI Web Site 被引用文献1件 参考文献16件

Jody M. Klymak, Sonya Legg, Robert Pinkel Journal of Physical Oceanography 40 (9), 2059-2074, 2010-09-01

...In this parameterization, radiation of internal tides is quantified using a linear knife-edge model....

DOI PDF 被引用文献3件

Yoshio Suzuki, Akihisa Takeuchi, Hisataka Takenaka, Ikuo Okada X-Ray Optics and Instrumentation 2010 1-6, 2010-07-13

...The full width at half maximum of the focused beam profile measured by knife-edge scan method is <mml:math xmlns:mml="http://www.w3.org/1998/Math/MathML"><mml:mrow><mml:mn>34.9</mml:mn><mml:mo>±</mml:mo...

DOI PDF XML 被引用文献5件

Y. HAYAKAWA, K. HAYAKAWA, M. INAGAKI, T. KUWADA, K. NAKAO, K. NOGAMI, T. SAKAI, I. SATO, Y. TAKAHASHI, T. TANAKA International Journal of Modern Physics A 25 (supp01), 174-188, 2010-06

...In order to investigate the effect of the geometrical condition of the crystal surface on the PXR property, the experiments have been carried out for the target crystal with a knife-edge-shaped cut surface...

DOI Web Site 被引用文献2件

Soichiro Handa, Takashi Kimura, Hidekazu Mimura, Hirokatsu Yumoto, Satoshi Matsuyama, Yasuhisa Sano, Kenji Tamasaku, Yoshinori Nishino, Makina Yabashi, Tetsuya Ishikawa, Kazuto Yamauchi Nuclear Instruments and Methods in Physics Research Section A: Accelerators, Spectrometers, Detectors and Associated Equipment 616 (2-3), 246-250, 2010-05

DOI Web Site Web Site 被引用文献3件

Luc Rainville, T. M. Shaun Johnston, Glenn S. Carter, Mark A. Merrifield, Robert Pinkel, Peter F. Worcester, Brian D. Dushaw Journal of Physical Oceanography 40 (2), 311-325, 2010-02-01

...The major generation sites can be identified using a simplified 2D idealized knife-edge ridge model....

DOI PDF 被引用文献2件

大石 真也, 小路 正純, 岡安 雄一, 谷内 友希子, 米原 博人, 大熊 春夫 Ｊｏｕｒｎａｌ　ｏｆ　ｔｈｅ　Ｖａｃｕｕｍ　Ｓｏｃｉｅｔｙ　ｏｆ　Ｊａｐａｎ 53 (3), 140-143, 2010

...  A lot of aluminum (A2219-T852) flanges, which have a knife-edge seal, have been used at the SPring-8 storage ring....

DOI Web Site 被引用文献1件 参考文献4件

川西 毅, 大藤 惇生, 山中 晃徳, 吉野 雅彦 日本機械学会関東支部総会講演会講演論文集 2010.16 (0), 501-502, 2010

...Micro plastic forming tests of single crystal copper specimens were conducted by using a knife edge tool made of diamond....

DOI Web Site

正木 裕也, 藤倉 正俊, 永澤 茂, 福澤 康 北陸信越支部総会・講演会　講演論文集 2010.47 (0), 421-422, 2010

DOI Web Site

大澤 裕樹, 吉野 雅彦, 山中 晃徳, KURNIA Willy 生産加工・工作機械部門講演会 : 生産と加工に関する学術講演会 2010.8 (0), 127-128, 2010

...Second, a knife edge diamond tool is utilized in the Nano Plastic Forming process to fabricate cross pattern with various pitch settings on quartz glass and gold layer surface....

DOI Web Site

山中 晃徳, 川西 毅, 吉野 雅彦 年次大会講演論文集 2010.6 (0), 267-268, 2010

...The micro-indentation tests of single crystal copper specimens were conducted by using a knife edge tool made of diamond....

DOI Web Site

Kirihara Soshu, Hotta Mikinori, Niki Toshiki, Ohta Noritoshi Transactions of JWRI 38 (1), 7-11, 2009-09

...In this process, photosensitive resin pastes with titania particles dispersion were spread on a glass substrate with 10 μm in layer thickness by moving a knife edge, and two-dimensional images of ultra...

DOI HANDLE

Andreas Irmen, Johanna Kuehnel Journal of Economic Surveys 23 (4), 692-733, 2009-08-06

...We argue that the existing literature incorporates many relevant aspects; however, policy recommendations tend to hinge on several knife‐edge assumptions....

DOI Web Site Web Site 被引用文献3件

Jeffrey A. Hutchings Evolutionary Applications 2 (3), 324-334, 2009-07-31

...maturity is reduced by the dome‐shaped selectivities characteristic of fixed gears such as handlines (the greater the leptokurtosis, the lower the probability of a selection response) and enhanced by the knife‐edged...

DOI Web Site Web Site 被引用文献4件

Hugh Rosen, Pedro J. Gonzalez-Cabrera, M. Germana Sanna, Steven Brown Annual Review of Biochemistry 78 (1), 743-768, 2009-06-01

...Despite its knife-edge between life and death, this system, based in part on receptor subtype-selectivity and in part on differential attenuation of deleterious signals, now appears to be on the cusp of...

DOI Web Site 被引用文献20件

R. YOU, A. BORHAN, H. HAJ-HARIRI Journal of Fluid Mechanics 621 131-154, 2009-02-12

...The corresponding eigenfunction shows that indeed a sharp axisymmetric tail develops a knife-edge form....

DOI Web Site 被引用文献4件

Marcos A. de Araújo, Rubens Silva, Emerson de Lima, Daniel P. Pereira, Paulo C. de Oliveira Applied Optics 48 (2), 393-, 2009-01-08

DOI Web Site 被引用文献2件

川崎 太志, 飯 聡, 西村 由二三, 白土 男女幸, 濱田 明美, 仲井 朝美, 芳田 哲也 日本調理科学会誌 42 (2), 123-128, 2009

和包丁における，様々な刃先形状と官能評価の関係を明らかにするために，熟練者が研いだ4つの完成度（50％，70％，80％，100％）の包丁について，刃先粗さ，“切れ味”および“研ぎ味”を測定し，これらの項目間の関係を調査した。顕微鏡写真から測定された刃先粗さに関しては，70％の刃先は他の完成度のものよりも粗かった，その一方で100％の包丁は最も刃先粗さが小さかった。レーザー変位計を用いて測定した刃…

DOI NDLデジタルコレクション Web Site 参考文献8件

Miyaji Y., Kurisu H., Tanaka T., Yamamoto S., Furuya M. Transactions of the Materials Research Society of Japan 34 (3), 423-426, 2009

...The surface modification was also applied to knife edge of a titanium vacuum-flange....

DOI Web Site

田上 秀一, 福澤 洋平, 家元 良幸, 川地 隆一, 富山 秀樹 成形加工 21 (3), 161-169, 2009

...In this simulation, the angle of knife edge <I>θ</I>, the depth <I>d</I> and the length <I>l</I> of compression land of a blow molding mold were changed....

DOI Web Site 参考文献8件

松井 利一 映像情報メディア学会誌 63 (7), 967-976, 2009

...The evaluated images were continuous-tone generalized knife-edge, their edge-enhanced, and their digital halftone ones....

DOI Web Site Web Site 参考文献14件

正木 裕也, 藤倉 正俊, 永澤 茂, 福澤 康 機械材料・材料加工技術講演会講演論文集 2009.17 (0), _132-1_-_132-2_, 2009

...Asymmetric plunge cutting by using grooved knife edge plate was proposed for advanced die cutting of a polycarbonate (PC) sheet....

DOI Web Site

KAWANISHI Tsuyoshi, YAMANAKA Akinori, YOSHINO Masahiko, HIBINO Ryo, KIMURA Hidehiko Proceedings of International Conference on Leading Edge Manufacturing in 21st century : LEM21 2009.5 (0), 301-304, 2009

...Nano/micro plastic forming tests of single crystal copper specimens were conducted by using a knife edge tool made of diamond. The formed specimens were annealed under various conditions....

DOI Web Site

Suzuki Fumihiko, Sasaki Koichi The Proceedings of International Symposium on Seed-up and Service Technology for Railway and Maglev Systems : STECH 2009 (0), _353750-1_-_353750-6_, 2009

...Fortunately, the train stopped without collateral damages such as a knife-edge buckling and vehicle deviation from tracks and there were no fatalities....

DOI Web Site

Nai Gui Shang, Pagona Papakonstantinou, Martin McMullan, Ming Chu, Artemis Stamboulis, Alessandro Potenza, Sarnjeet S. Dhesi, Helder Marchetto Advanced Functional Materials 18 (21), 3506-3514, 2008-11-03

...The constituent graphene nanoflakes have a highly graphitized knife‐edge structure with a 2–3 nm thick sharp edge and show a preferred vertical orientation with respect to the Si substrate as established...

DOI Web Site Web Site 被引用文献10件

Jurgen Kunisch, Jorg Pamp 2008 IEEE International Conference on Ultra-Wideband 2008-09

DOI PDF 被引用文献2件

Hatakeyama So, Kunimura Shinsuke, Sasaki Nobuharu, Yamamoto Takashi, Kawai Jun Analytical Sciences 24 (7), 847-850, 2008-07-10

...Line scanning for a mug and a knife-edge-scan of an iron sheet were carried out using this spectrometer....

機関リポジトリ

D. MAYERICH, L. ABBOTT, B. McCORMICK Journal of Microscopy 231 (1), 134-143, 2008-07

...</jats:p><jats:p> The resolution and scanning speed of knife‐edge scanning microscopy provides a new method for imaging tissue at sufficient resolution to reconstruct maps of cellular distribution and...

DOI Web Site Web Site 被引用文献1件

荒木, 幹也, 曽根, 祐輔, 小島, 孝之, 志賀, 聖一, 小保方, 富夫 日本機械学會論文集. B編 74 (738), 377-384, 2008-02-25

application/pdf

機関リポジトリ HANDLE

Masaharu Nishikino, Hayato Kawazome, Keisuke Nagashima Japanese journal of applied physics : JJAP 47 (2), 983-985, 2008-02

コレクション : 国立国会図書館デジタルコレクション > デジタル化資料 > 雑誌

DOI Web Site Web Site ほか1件 被引用文献5件 参考文献19件

Thomas Peacock, Paula Echeverri, Neil J. Balmforth Journal of Physical Oceanography 38 (1), 235-242, 2008-01-01

...The synthetic Schlieren technique is used to study the wave fields generated by a Gaussian bump and a knife edge....

DOI PDF 被引用文献2件

松井 利一 映像情報メディア学会技術報告 32.48 (0), 45-50, 2008

視覚系と同様の画像観測特性を持つ協調視覚モデルを応用した鮮鋭さ評価法を利用し,視覚系の画像観測特性が鮮鋭さ評価機能に及ぼす影響を計算論的に検討した.評価画像は,帯域幅可変の画像システムから出力された線幅可変の一般化ナイフエッジ画像とその擬似中間調画像であり,画像観測特性に関する視覚系と本モデルの同等性及び主観評価値と客観評価値間の相関係数値と画像観測機構の有無の関係を調べた.その結果,協調視覚モ…

DOI Web Site 参考文献11件

青位 祐輔, 口丸 高弘, 佐藤 文信, 加藤 裕史, 飯田 敏行 日本放射線安全管理学会誌 7 (2), 163-167, 2008

...The micro beam system is composed of a micro focus X-ray tube, a capillary for X-ray guide, an inverted microscope and others.A beam profile was measured by the knife-edge method and the focused beam size...

DOI Web Site 医中誌 被引用文献1件

Willy Kurnia, Masahiko Yoshino 精密工学会学術講演会講演論文集 2008A (0), 733-734, 2008

...Experimental works with 0.1 N-1.0 N indentation load variations and 2.5 um-7.5 um pitch variations using knife edge diamond tool are conducted to study the feasibility of this technique....

DOI

荒木 幹也, 曽根 祐輔, 小島 孝之, 田口 秀之, 志賀 聖一, 小保方 富夫 日本機械学会論文集Ｂ編 74 (738), 377-384, 2008

...The beam refraction is converted to a brightness signal using a knife edge and a photo sensor. The signal obtained with the photo sensor is the integrated value along the laser beam path....

DOI Web Site

HATAKEYAMA So, KUNIMURA Shinsuke, SASAKI Nobuharu, YAMAMOTO Takashi, KAWAI Jun Analytical Sciences 24 (7), 847-850, 2008

...Line scanning for a mug and a knife-edge-scan of an iron sheet were carried out using this spectrometer....

DOI 機関リポジトリ HANDLE ほか4件 参考文献37件

藤井 太一, 平野 稔, 渋川 哲郎, 石田 徹, 竹内 芳美 精密工学会誌 74 (12), 1298-1302, 2008

...Then, sharp edges are created on curved surfaces by fly cutting method with knife edged single crystal diamond tool....

DOI Web Site 被引用文献3件 参考文献4件

吉野 雅彦, 吉澤 文一 精密工学会学術講演会講演論文集 2008S (0), 805-806, 2008

ナイフエッジ型のダイヤモンド工具の押込みによってガラスに周期的な三角形断面の微細溝列を作製した．深さ80nmから120nm，周期250nmから5μmの加工条件で試料を作製し，分光光度計によって光の波長に対する透過率を測定した．深さの増大によって透過率が増加し，構造周期によって光の透過率が増加する波長域が変化するという特性が得られた．構造の最適化によって平面よりも高い透過率が得られることが分かった．

DOI

日比野 亮, 吉野 雅彦, 南 那由多 生産加工・工作機械部門講演会 : 生産と加工に関する学術講演会 2008.7 (0), 125-126, 2008

...And knife edge tool was indented into crystalline copper or aluminum specimen of various crystal orientations. And change of crystal orientation was measured by EBSD analysis....

DOI Web Site

桐原 聡秀 ホソカワ粉体工学振興財団年報 16 (0), 15-20, 2008

...In the micro-sterereolithography process, the photo sensitive resin paste with nanosized alumina particles dispersion was spread on a substrate with 10 μm in layer thickness by moving a knife edge, and...

DOI Web Site 参考文献6件

Youssef S. Al Jabbari, Raymond Fournelle, Gerald Ziebert, Jeffrey Toth, Anthony M. Iacopino Journal of Prosthodontics 17 (3), 168-180, 2007-11-15

...The wear was aggressive enough to cause galling, which led to thinning of the threads and, in severe cases, to knife‐edges at thread crests....

DOI Web Site Web Site 被引用文献2件

N. Nagao, S. Yokota, K. Komurasaki, Y. Arakawa Review of Scientific Instruments 78 (11), 115108-, 2007-11-01

...Two crossover knife-edges support each pendulum arm: one is set on the other at a right angle. They enable the pendulums to swing in two directions....

DOI PDF 被引用文献10件

Makoto Sakakibara, Hiroya Ohta, Tadashi Kanosue Japanese journal of applied physics. Part. 1, Regular papers, brief communications & review papers : JJAP 46 (9B), 6166-6170, 2007-09

コレクション : 国立国会図書館デジタルコレクション > デジタル化資料 > 雑誌

DOI Web Site Web Site ほか1件 参考文献6件

Ryan Miller, Y. Y. Lau, John H. Booske Applied Physics Letters 91 (7), 074105-, 2007-08-13

DOI Web Site 被引用文献1件

C. Ollinger, C. Fuhse, S. Kalbfleisch, R. Tucoulou, T. Salditt Applied Physics Letters 91 (5), 2007-07-30

...Knife edge fluorescence scans revealed a beam diameter of 75nm at a distance of 30μm behind the guide....

DOI PDF 被引用文献1件

A. Yabuki, H. Yamagami, K. Noishiki Materials and Corrosion 58 (7), 497-501, 2007-07

...A coating with a thickness of approximately 30 μm was applied to the surface of aluminum alloy 3003, and after creating an artificial defect by means of a knife‐edge, a corrosion test was carried out in...

DOI Web Site Web Site 被引用文献10件

J.P Meijaard, Jim M Papadopoulos, Andy Ruina, A.L Schwab Proceedings of the Royal Society A: Mathematical, Physical and Engineering Sciences 463 (2084), 1955-1982, 2007-06-11

...The wheels are also axisymmetric and make ideal knife-edge rolling point contact with the ground level. The mass distribution and geometry are otherwise arbitrary....

DOI Web Site Web Site 被引用文献4件

C. Grünzweig, G. Frei, E. Lehmann, G. Kühne, C. David Review of Scientific Instruments 78 (5), 2007-05-01

...The obtained results are in good agreement with comparison measurements using the standard knife edge detection method.</jats:p>...

DOI PDF 被引用文献1件

Jaime Pietrokovski, Ruth Starinsky, Baruch Arensburg, Israel Kaffe Journal of Prosthodontics 16 (2), 141-147, 2007-03

...Of the ridges, 38% were thin knife‐edged. In the maxilla, bone resorption was centripetal, and the crest of the edentulous arch was external to the osseous base of the cranium....

DOI Web Site Web Site 被引用文献3件

T. Hotta, S. Nii, T. Yajima, F. Kawaizumi Chemical Engineering & Technology 30 (2), 208-213, 2007-01-25

...After making contact in the channel, the layers were split into two streams through a knife‐edge. The amount of solute transferred was determined by analyzing liquid samples taken from the outlet....

DOI Web Site Web Site 被引用文献2件

Yi Chiu, Jiun-Hung Pan Optics Express 15 (10), 6367-, 2007

DOI Web Site 被引用文献1件

D. Boschetto, G. Mourou, A. Rousse, A. Mordovanakis, Bixue Hou, J. Nees, D. Kumah, R. Clarke Applied Physics Letters 90 (1), 011106-, 2007-01-01

...<jats:p>The authors use Fresnel diffraction from knife-edges to demonstrate the spatial coherence of a tabletop ultrafast x-ray source produced by laser-plasma interaction....

DOI PDF 被引用文献1件

Tanaka Atsushi, Hideshima Masayuki, Ohyama Takashi Prosthodontic Research & Practice 6 (1), 6-13, 2007

...<BR><B>Results:</B> The results suggested that the subjects experienced greater comfort with connectors having a knife-edge-shaped margin (<I>P</I><0.05)....

DOI Web Site 医中誌 被引用文献2件 参考文献20件

市野 善朗, 齊藤 一朗 照明学会　全国大会講演論文集 40 (0), 130-130, 2007

産業技術総合研究所計量標準総合センター（NMIJ）において、ナイフエッジ加工された放射測定用アパーチャに対し、長さ標準にトレーサブルな精密放射測定に基づく非接触式開口面積校正装置を開発した。スペイシャルフィルタによってガウシアンプロファイルに近似させたレーザービームに対し、被校正アパーチャを入射面内にて二次元等間隔に位置決めし、各点毎の透過光強度を積分球に取り付けた検出器によって測定することによ…

DOI

今里 裕司, 高橋 弘行, 鈴木 勝順, 仮谷 宗一郎, 橋口 原 年次大会講演論文集 2007.7 (0), 309-310, 2007

...The patterning was done by AFM in which a photo resist layer was carved by a knife edge probe....

DOI Web Site

高嶋 豊士, 上田 政人, 加藤 保之 年次大会講演論文集 2007.1 (0), 99-100, 2007

...The appropriate evaluation of crushing behavior is, however, difficult because of knife edges and bending mode constraints. In this study, new test fixture was proposed to resolve the problems....

DOI Web Site

田村 繁治, 安本 正人, 上條 長生, 鈴木 芳生, 竹内 晃久, 上杉 健太朗, 寺田 靖子 真空 50 (3), 164-166, 2007

...measured beam size and the diffraction efficiency of a FZP during 9 months to the FZP with 4-step structure, (2) the diffraction efficiency of the 1st order focus and the focused beam size measured by the knife-edge...

DOI Web Site 被引用文献1件 参考文献15件

吉野 雅彦, 南 那由多, 木村 英彦, 松村 隆, 梅原 徳次 日本機械学会論文集Ａ編 73 (733), 1052-1057, 2007

...This paper reports a study on crystal rotation in a single crystal copper specimen by a knife edge tool indentation....

DOI Web Site Web Site 参考文献30件

仙波 浩雅, 戸井 康雄 年次大会講演論文集 2007.5 (0), 51-52, 2007

...As it is hard for the films to adhere tightly to plant stem because of their damp, however, the different way using a thin metal plate with knife-edge parts is introduced as a simple sensor for detecting...

DOI Web Site

Philip Boulcott, Peter J. Wright, Fiona M. Gibb, Henrik Jensen, Iain M. Gibb ICES Journal of Marine Science 64 (2), 369-376, 2006-12-18

...The current assessment of lesser sandeel (Ammodytes marinus) in the North Sea assumes a single stock and a knife-edge maturity ogive....

DOI PDF 被引用文献1件

Craig S Clements, Michelle A Dunstone, Whitney A Macdonald, James McCluskey, Jamie Rossjohn Current Opinion in Structural Biology 16 (6), 787-795, 2006-12

DOI Web Site Web Site 被引用文献1件

Hiroshi Itoh, Toshiyuki Fujimoto, Shingo Ichimura Review of Scientific Instruments 77 (10), 103704-, 2006-10-01

...Comb-shaped line and space (LS) and wedge-shaped knife-edge structures were fabricated on a GaAs substrate....

DOI PDF 被引用文献14件

Georg Watzak, Werner Zechner, Gabor Tepper, Christoph Vasak, Dieter Busenlechner, Thomas Bernhart Clinical Oral Implants Research 17 (6), 723-729, 2006-09-07

...<jats:p><jats:bold>Abstract: </jats:bold> The aim of this study was to evaluate the clinical relevance of horizontal distraction osteogenesis (DO) with bone micro screws for reconstructing knife‐edge alveolar...

DOI Web Site Web Site 被引用文献1件

François Pétrélis, Stefan Llewellyn Smith, W. R. Young Journal of Physical Oceanography 36 (6), 1053-1071, 2006-06-01

...As A → 0 recent results are recovered for the tidal conversion produced by a knife-edge barrier....

DOI PDF 被引用文献1件

Jody M. Klymak, James N. Moum, Jonathan D. Nash, Eric Kunze, James B. Girton, Glenn S. Carter, Craig M. Lee, Thomas B. Sanford, Michael C. Gregg Journal of Physical Oceanography 36 (6), 1148-1164, 2006-06-01

...This kinematic relationship is supported by combining a simple knife-edge model to estimate internal tide generation, with wave–wave interaction time scales to estimate dissipation....

DOI PDF 被引用文献5件

H. Kamizuma, T. Omori, K. Hamishoto, M. Yamaguchi IEEE Transactions on Ultrasonics, Ferroelectrics and Frequency Control 53 (6), 1186-1191, 2006-06

DOI PDF 被引用文献9件

大貫 哲也, 金沢 憲一 機械材料・材料加工技術講演会講演論文集 2006.14 (0), 179-180, 2006

...Large die castings with shell structure for automobile have a thick gate and many runners just after casting which have to be removed using knife-edge cutters because the method by applying bending force...

DOI Web Site

綾野 賢治郎, 今里 裕司, 橋口 原 年次大会講演論文集 2006.7 (0), 291-292, 2006

...This report describes results of resist patterning using a knife edge probe we have developed recently....

DOI Web Site

谷脇 満, 花田 貴紀, 桜井 直樹 園芸学会雑誌 75 (5), 410-414, 2006

...The texture data were obtained by acoustic measurements using a piezoelectric sensor and knife edge probe....

DOI NDLデジタルコレクション 日本農学文献記事索引 ほか2件 被引用文献8件 参考文献29件

加藤 友規, 川嶋 健嗣, 澤本 晃一, 舩木 達也, 香川 利春 精密工学会誌論文集 72 (6), 772-777, 2006

...<br>A granite table is mounted on an air spring system, having a knife edge support in one end....

DOI Web Site 被引用文献4件 参考文献13件

Michèle L. Clarke, Helen M. Rendell Earth Surface Processes and Landforms 31 (1), 15-29, 2005-09-21

...<jats:title>Abstract</jats:title><jats:p>Characteristic badlands are incised into Plio‐Pleistocene clays in Basilicata, southern Italy, creating steep, scarp slopes with knife‐edge ridges (<jats:italic...

DOI Web Site Web Site 被引用文献1件

深津 拡也, 柳 和久 精密工学会誌論文集 71 (12), 1590-1594, 2005

従来の光触針式輪郭測定において, 予期しない突発なピークノイズや高周波ノイズなどの異常値が生じる. この主な原因はスペックル誤差である. 既報において, スペックル誤差補正ユニットをもつ光触針式センサーを提案し良好な結果を得た. しかしながら開発したこのセンサーにおいても, 0.1 μmRa以下の表面粗さの小さな領域では異常値が残存する. 本研究では, …

DOI Web Site 参考文献11件

吉野 雅彦, 木ノ内 有紀 精密工学会学術講演会講演論文集 2005A (0), 115-116, 2005

各種ガラス板などの硬脆材料の微細塑性加工技術を検討した.サブミクロンオーダーの微細突起を持つダイヤモンド工具をFIBによって作製し,それを用いてガラスへ直接スタンピング加工を行った.これによりサブミクロンオーダーの凹凸が塑性加工により効率よく行えることを示した.さらに,ナイフエッジ型の工具を用いて押込み加工を行った.加工痕に対して,加工形状の観察及び加工特性の検討を行った.

DOI

荒牧 國次 Ｚａｉｒｙｏ‐ｔｏ‐Ｋａｎｋｙｏ 54 (9), 410-418, 2005

自己補修性保護皮膜を環境に優しい腐食抑制剤の処理によって鉄および亜鉛電極上に作製することを試みた. 皮膜で覆った電極に傷をつけ, NaCl水溶液中に長時間浸漬した後, 分極測定と傷部分の観察から皮膜の保護性と自己補修性を評価した. 傷をつけ浸漬した表面のX線光電子分光法と電子線プローブ微小分析法から鉄や亜鉛の腐食に対する皮膜の保護性と自己補修性が示された.

DOI Web Site 被引用文献1件

Kamizuma Hiroshi, Yang Liyan, Omori Tatsuya, Hashimoto Ken-ya, Yamaguchi Masatsune Japanese Journal of Applied Physics 44 (6B), 4535-4538, 2005

...For the optical detection, the phase-sensitive knife-edge method was employed, by which the system is made very insensitive to low-frequency mechanical vibration....

DOI Web Site Web Site ほか1件 被引用文献10件 参考文献17件

黒河内 智, 菊地 俊雄, 秋道 斉, 平田 正紘 真空 48 (3), 142-144, 2005

...While a lot of commercially available knife-edge bakable flanges interchangeable with ConFlat type sealing system have been widely circulated and applied in UHV apparatus, their compatibility is occasionally...

DOI Web Site 被引用文献1件 参考文献8件

清水 雅樹, 佐藤 徹, 加藤 昭二, 向川 政治, 高木 浩一, 藤原 民也 電気学会論文誌．　Ａ 125 (6), 501-507, 2005

...A trench electrode has large number of knife-edge rails. A multipoint electrode has large number of four-sided pyramid projections on the plane....

DOI Web Site Web Site 被引用文献12件 参考文献22件

深津 拡也, 三須 清孝, 柳 和久 精密工学会誌論文集 71 (5), 590-594, 2005

光触針輪郭測定において, 予期しない突発なピークノイズや高周波ノイズなどの測定誤差が生じる. この誤差は, 加工方法によっては非常に大きく, この影響を除去する強い要求があった. この主な原因はスペックル誤差と測定面の傾斜誤差である. スペックル誤差の低減については既報で詳しく報告した. 本研究では, 測定面の傾斜が測定値に与える影響を定量的に明らかにした. さらに, …

DOI Web Site 参考文献16件