Heat Transfer Enhancement of Natural Convection and Development of a High-Performance Heat Transfer Plate

• Misumi Toshiyuki

  Department of Mechanical Engineering, Kagoshima National College of Technology

• Kitamura Kenzo

  Department of Energy Engineering, Toyohashi University of Technology

抄録

・rights：日本機械学会・rights：本文データは学協会の許諾に基づきCiNiiから複製したものである・relation：isVersionOf：http://ci.nii.ac.jp/naid/110002976639/
A new enhancing technique was developed for natural convection adjacent to a vertical, heated plate. In order to enhance the heat transfer, V-shaped plates of which the edges faced upstream, were attached to a vertical plate in a staggered layout. These plates work not only as an extended surface but also as a heat transfer promoter. The overall heat transfer coefficients of the above enhanced surface were measured and compared with a nontreated, flat surface and a conventional finned surface. The results show that the highest heat transfer performance achieved is for the experimental surface and that the heat transfer coefficient is 40% higher than that of a conventional finned surface with the same total surface area and fin height.

収録刊行物

• JSME international journal. Ser. B, Fluids and thermal engineering = JSME international journal. Ser. B, Fluids and thermal engineering

  JSME international journal. Ser. B, Fluids and thermal engineering = JSME international journal. Ser. B, Fluids and thermal engineering 36 (1), 143-149, 1993-02-15

  一般社団法人日本機械学会

キーワード

• Heat_Transfer
• Heat_Transfer_Enhancement
• Natural_Convection
• Extended_Heat_Transfer_Plate
• Heat_Exchanger
• Diverter_Plate

詳細情報

• CRID: 1572824501933473408
• NII論文ID: 110002976639
• NII書誌ID: AA10888815
• ISSN: 13408054
• Web Site: http://id.nii.ac.jp/1117/00001111/
• 本文言語コード: en
• データソース種別:
  • CiNii Articles