CiNii Books - Multi-body dynamics : monitoring and simulation techniques

Vol. [1]: contains refereed papers accepted for the 1st International Symposium on Multi-Body Dynamics (MBD-MST 97) held at the University of Bradford, UK, 25-27 March 1997

Vol. 2: contains refereed papers accepted for the 2nd International Symposium on Multi-Body Dynamics (MBD-MST 2000) held at the University of Bradford, UK, 27-28 June 2000

Vol. 3: "This volume contains the papers presented at the 3rd International Symposium on Multi-Body Dynamics : Monitoring and Simulation Techniques."--Pref

Vol. 2, editor: Morteza Ebrahimi

Vol. 3, editor: Homer Rahnejat and Steve Rothberg

Vol. 2-3: published: London : Professional Engineering, 2000-

Includes bibliographical references and index

Description and Table of Contents

Volume: [1] ISBN 9781860580642

Description

A collection of papers from the International Symposium on Multi-Body Dynamics: Monitoring and Simulation Techniques, held at the University of Bradford, March 1997. The topics covered, among others, include: power train dynamics; aerospace dynamics; vehicle dynamics; and rotor dynamics.

Table of Contents

Part 1 Power train dynamics: dynamics and lubrication with particular reference to the internal combustion engine
hybrid vehicles - fact or fiction
clutch pedal dynamic noise and vibration investigation
investigation of clonk phenomenon in vehicle transmissions - measurement, modelling, and simulation
practical applications of dynamic system modelling in powertrain and vehicle refinement
system layout considerations for turbo-generator based hybrid vehicles
the application of dynamic modelling using parametric design methods for an automotive driveline system
driveline vibration analysis of a Land Rover four wheel-drive vehicle
hybrid modelling of marine power transmission systems
inlet manifold modelling for four-stroke engines
gas turbine engine dynamic model identification using spectral analysis for condition monitoring. Part 2 Contact mechanics and elasto-hydrodynamics: contact mechanics viewed as a problem in a multibody theory
modelling inter-body contacts in a multiphysics framework
point contact elasto-hydrodynamic pressure distribution and sub-surface stress field
elasto-hydrodynamic lubrication of point contact under combined rolling and squeeze film notion. Part 3 Numerical methods for multi-body dynamics: a variable partitioning technique for integrating constrained equations of motion in mechanism analysis
dynamic behaviour of complex non-linear systems
methodology and techniques of complicated machinery dynamic simulation
mechanical system control with prescribed dominant poles. Part 4 Aerospace dynamics: bearings for spacecraft applications
microgravity effects on inertial navigation systems
parameter variatiions in airframes
flow field study of an aerofoil equipped with a flap. Part 5 Vehicle dynamics: multi-body techniques in railway applications
on the use of high-performance computing in multi-body analysis for two-wheeled suspension design
a simple and efficient formulation for the dynamic analysis of flexible multibody systems
virtual prototype testing applied for non-linear dynamic analysis of a vehicle tailgate
fuzzy logic model reference adaptive control of a vehicle active suspension with non-linear dynamics. Part 6 Machine and rotor dynamics: tool-workpiece interaction during milling of flexible parts
chaotic and stochastic dynamics of orthogonal metal cutting
a multi-body model of machine tool-cutting process system
vibration analysis of a longitudinally coupled flexible shaft-multiple disk system by using substructure synthesis with assumed-modes method
high frequency rolling mills chatter - mathematical identification and simulation.

Volume: 2 ISBN 9781860582585

Description

Leading developments in analysis and testing Multi-Body Dynamics: Monitoring and Simulation Techniques II provides a comprehensive update on the latest developments in the field. Presented at the 2nd International Symposium of Multi-Body Dynamics, this book details the newest work surrounding monitoring and simulation from leading researchers in industry and academia. Applicable to a wide variety of applications, the ideas and techniques presented here provide useful insight for anyone working in dynamics analysis and experimentation.

Table of Contents

Part 1 Contact, impact and flexible multi-body dynamics: contact problems in multi-body dynamics
multi-body impact with friction
challenges of finite element simulations of vehicle crashes
free vibrations of flexible thin rotating discs
study of sub-harmonic vibration of a tube roll using simulation model
non-collocated tracking control of a rotating Euler-Bernoulli beam attached to a rigid body. Part 2 Vehicle dynamics: concepts for the modelling of a passenger car
predictive control of vehicle suspensions with time delay for a quarter car model
optimization of ride comfort
passenger and carbody interaction with rail vehicle dynamics
human body modelling techniques for use with dynamics simulations
dynamic tyre testing for vehicle handling studies. Part 3 Engine dynamics: analysis of crankshaft and cylinder block vibration in operation, coupling by means of non-linear oil film characteristics and dynamic stiffness
simulations of flexible engine block, crank and valvetrain effects using DADS
analysis of knock intensity in spark-ignition engines
elastic body contact simulation for predicting piston slap induced noise in IC engine
multi-body dynamics for the assessment of engine induced inertial imbalance and torsional-deflection vibration. Part 4 Powertrain systems: the establishment of realistic multi-body clutch systems NVH targets using rig-based experimental techniques
measured torsional damping levels for two spur gearbox rigs
test-bench investigation of CV-joints regarding NVH behaviour
low-frequency torsional vibration of vehicular driveline systems in shuffle
simulation of driveline actuation cables to improve cable design. Part 5 Vibration monitoring and modelling: vibration and grinding
multivariable control of AMB spindles
vibration modelling and identification using Fourier transform, wavelet analysis and least-square algorithm
modelling and simulation of a vehicle dynamometer using hybrid modelling techniques
end milling and its effects on the spindle drive mechanism.

Volume: 3 ISBN 9781860584633

Description

Multi-body dynamics describes the physics of motion of an assembly of constrained or restrained bodies. As such it encompasses the behaviour of nearly every living or inanimate object in the universe. "Multi-body dynamics - Monitoring and Simulation Techniques III" includes papers from leading academic researchers, professional code developers, and practising engineers, covering recent fundamental advances in the field, as well as applications to a host of problems in industry. They broadly cover the areas: multi-body methodology; structural dynamics; engine dynamics; vehicle dynamics - ride and handling; and machines and mechanisms. "Multi-body Dynamics" is a unique volume, describing the latest developments in the field, supplemented by the latest enhancements in computer simulations, and experimental measurement techniques. Leading industrialists explain the importance attached to these developments in industrial problem solving.

Table of Contents

Preface xi
Foreword by Homer Rahnejat - A tribute to Jean D'Alembert and Albert Einstein Geometrical interpretation of Motion: an ironic legacy of apparently irreconcilable atomistic and continuum philosophies xiii
Multi-body Methodology Multi-body dynamics - fundamentals and applications W Schiehlen 3
Computer methods for the analysis of large deformations in multi-body system dynamics A A Shabana 15
An index zero formulation of the general dynamic differential equations using the transmission functions N V Orlandea 31
Marionette posture analysis by particle swarm optimization algorithm M Okuma and G M Germain 51
Visualization of dynamic multi-body simulation data A Siemers and D Fritzson 57
Fatigue analysis on a virtual test rig based on multi-body simulation S Dietz and A Eichberger 73
Representation and visualization of surface related multi-body simulation data A Siemers and D Fritzson 83
Sub-surface visualization and parallel simulation A Siemers and D Fritzson 91
Influence of modelling and numerical parameters on the performance of a flexible MBS formulation J Cuadrado and R Gutierrez 99
The multi-particle system (MPS) model as a tool for simulation of mechanisms with rigid and elastic bodies D Talaba and Cs Antonya 111
Structural Dynamics
Stability and Chaotic Response of Elastic plate with large deflection L Dai, Q Han, and A Liu 123
Dynamic simulation of civil engineering structures in virtual reality environment Cs Antonya and D Talaba 137
Wind force time-history generation by discrete Fourier transform (DFT) P J Murtagh, B Basu, and B M Broderick 147
FRFs for wind turbine lattice towers subjected to rotor mass inbalance P J Murtagh, B Basu, and B M Broderick 155
Periodic motions in a periodically forced, piecewise linear system A C J Luo 163
Dynamic models for components considered in the design of a solar concentrator H R Hamidzadeh and L C Moxey 175
A simple beam element for large rotation problems K Kerkkanen, J Sopanen, and A Mikkola 191
Engine Dynamics
Advanced CAE simulation and prediction of drivetrain attributes H Foellinger 207
Virtual testing supports reliability engineering of engine prototypes G Rainer 221
Periodic response and stability of reciprocating engines I Goudas, P Metallidis, I Stavrakis, and S Natsiavas 231
Coupled torsional and transverse vibration of engines A L Guzzomi, S J Drew, and B J Stone 243
Quality and validation of cranktrain vibration predictions - effect of hydrodynamic journal bearing models G Offner, H H Priebsch, M T Ma, U Karlsson, A Wikstrom, and B Loibnegger 255
Multi-body analysis and measurement of valve train motions M Teodorescu, H Rahnejat, and S J Rothberg 273
Drivetrain Dynamics
The torsional vibration of gear boxes with backlash M L Coltrona and B J Stone 287
Coupled torsional and transverse vibration of gearboxes M Sargeant and B J Stone 299
Development of a simulation tool for the prediction of dynamic transmission error, the source of transmission whine D Parkin-Moore, G Davis, D Bell, C H Lu, P Brooks, and A Leavitt 311
Low-noise automotive transmissions - investigations of rattling and clattering S N Dogan, J Ryborz, and B Bertsche 323
NVH-behaviour of side shaft-systems J W Biermann 339
Friction models of automotive transmissions equipped with tripod joints J-P Mariot, J-Y K'nevez, and B Barbedette 351
Using Taguchi methods to aid understanding of a multi-body clutch pedal noise and vibration phenomenon P Kelly and J W Biermann 361
Combined multi-body dynamics, structural modal analysis, and boundary element method to predict multi-physics interactions of driveline clonk S Theodossiades, M Gnanakumarr, H Rahnejat, and M Menday 373
Vehicle Dynamics, Ride and Handling Dynamic analysis of semi-active suspension systems using a co-simulation approach R Ramli, M Pownall, M Levesley, and D A Crolla 391
Smart driver: a research project for closed loop vehicle simulation in MSC.ADAMS R Frezza, A Saccon, D Minen, and C Ortmann 401
Non-linear response of an all-terrain vehicle on a rough terrain L Dai, J Wu, and M Dong 415
Multi-objective optimization of quarter car models with passive and semi-active suspensions G Verros, M Kazantzis, S Natsiavas, and C Papadimitriou 429
Torque steer influences on McPherson front axles J Dornhege 439
Computer-based development of control strategies for ground vehicles M A Naya and J Cuadrado 447
Machines and Mechanisms
Modelling of a smart spindle unit P Hynek, M Jackson, R Parkin, and N Brown 461
A dynamic modelling and simulation of cutting process in turning W S E Moughith, A A Abdul-Ameer, and A Khanipour 475
Modelling and simulation of a precision pneumatic actuation system R C Richardson, M Brown, B Bhakta, and M Levesley 485
Transient dynamic behaviour of deep-groove ball bearings W W Sum, E J Williams, S McWilliam, and D R Ashmore 497
Determination of the effect of contact kinematics of squeeze caving phenomenon through general covariance M Kushwaha and H Rahnejat 507
Authors' Index 520

by "Nielsen BookData"

Multi-body dynamics : monitoring and simulation techniques

Author(s)

Bibliographic Information

Available at 12 libraries

Search this Book/Journal

Note

Description and Table of Contents

Details

Export