Advanced powder technology : proceedings of the 3rd International Latin-American Conference on Powder Technology, November 26-28, 2001, Santa Catarina Brazil

著者

• International Latin-American Conference on Power Technology
• Salgado, Lucio
• Filho, Francisco Ambrozio

書誌事項

Advanced powder technology : proceedings of the 3rd International Latin-American Conference on Powder Technology, November 26-28, 2001, Santa Catarina Brazil

edited by Lucio Salgado and Francisco Ambrozio Filho

（Materials science forum, v. 416-418）

Transtech Publications, c2003

注記

Includes bibliographical refernces and indexes

内容説明・目次

内容説明

This volume focuses on the technology of metal and ceramic powders. Volume is indexed by Thomson Reuters CPCI-S (WoS).

目次

Synthesis and Characterization of Eletrocatalyst Powders for Application in PEM Fuel Cells Microstructure Study and Crystalline Phase Formation on Nb2O5-Ba9Ti2O20 Microwave Resonators Statistical Analysis of Ti-6Al-7Nb Powder Mixture Homogeneity Use of Titanium Powders Obtained by Sponge Screening and for the HDH Process in Titanium Alloy Production for Powder Metallurgy (P/M) A Computer Simulation of the Hard-Metal Structure: the Interpretation of Structural Features Microstructural Parameters of Cu-Al2O3 Dispersion Strengthened Materials Technological Characteristics of Garnets for Ultra-High Pressure Water Jets Influence of Sharpening and Coating Operations on the Wear of Sintered High Speed Steel Tools Characterization of Sintered NdFeB Magnets after Phosphating in Alkaline and Acidic Environments Electrochemical Characterization of Niobium Carbide Reinforced Composites for the Production of Industrial Gases Corrosion Resistance of Powder Injection Moulded AISI 316L and 17-4PH Stainless Steels in Acid Rain Environments Corrosion Characterization of Sintered Stainless Steel Filters with Surface Films Formed in Sulfuric Acid Solutions Containing BTAH Corrosion Performance and Cytotoxicity of Sintered Nd-Fe-B Magnets Effect of Heat Treatments on Cr-Mo Steels Based on Astraloy CrM Powder Grade with Manganese Additions Influence of the Heat Treatment on the Microstructure of AISI T15 High Speed Steel Effect of Heat Treatment on the Microstructure of Spray Formed AISI M2 High-Speed Steel Anisotropic Ferrite Produced with Coarse Particles Milled from Sintered Magnets Phase Monitoring during Nd(Fe,M)12 (M=Mo or Ti) Compound Nitrogenation by Chemical Reaction with Sodium Azide (NaN3) Magnetic Properties of Spray Formed Fe-3%Si, Fe-5%Si and Fe-6.5%Si Alloys The Effect of Processing Parameters and Zirconium Additions upon the Magnetic Properties of Rare Earth Iron Boron HDDR Magnets High Energy Ball Mill Processing Production of Carbides Cemented by Mechanical Alloying Stoichiometric Quantification of the Amorphous Precursor in the Mg-Ni System An Investigation of the use of Stearic Acid as a Process Control Agent in High Energy Ball Milling of Nb-Al and Ni-Al Powder Mixtures Characterization of High-Energy Ball Milling of Ba Hexaferrite Combustion Synthesis of High-Energy Ball-Milled Nb + 3Al Powder Mixtures Contamination Effects on Precipitation Hardening of Cu-Alumina Alloys, Prepared by Mechanical Alloying The Effect of Zirconium Additions on the Magnetic Properties of Pr-Fe-B HD Sintered Magnets Effect of Rare Earth Additions in the Mechanosynthesis of Molybdenum Carbide Extrusion of Aluminum Alloys Prepared from Mechanically Alloyed Powder Plasma Sintering of Fe-NbC Composites Production and Characterization of Composites of the Al-TiO2 System Using the SHS Process Influence of Processing Parameters on the Microstructure and Oxidation Behavior of Hot Pressed Ni-20Cr + WC Metal Matrix Composites Flux-Assisted Infiltration of Molten 6063-Al into TiC Beds Superplastic Deformation of Al-Al4C3 Composites Synthesis of Diamond Reinforced Al-Mg Nanocrystalline Composite Powder Using Ball Milling Mechanical Behavior of Al-Mg-Si Alloys Reinforced with Ceramic and Intermetallic Particles Processing of Diamond Composites for Cutting Tools by Powder Metallurgy and Rotary Forging Evaluation of As-Hipped PM High Speed Steel for Production of Large-Diameter Cutting Tools Chromium Steel Powders for Components High Strength Synchronizer Hubs by Sinter-Hardening Sintering of P/M Nb-TiB2 Alloys Dissolution of Niobium Particles during Ti-6Al-7Nb Sintering Sintering Iron Using a Hollow Cathode Discharge with External Ti Cathode Sintered High Nitrogen Stainless Steel Obtained using Pre-Mixed Powders Microstructural Characterization of Rhenium Powder Obtained at Various Temperatures Deposition of Aluminum onto Titanium Powder in its Self-Convective Motion by DC Sputtering Milling and Hot Consolidation of Al-Fe-Nb Alloy Compacting of Molybdenum Powder by Pressures Higher than 2.0 Gpa The Effect of Compaction on Expansion and Gas Release in Al-TiH2 Powder Compacts Synthesis of Powder Molybdates for Micro-Alloying of ADI Castings Mechanical and Microstructural Characterisation of P/M High-Speed Steel Valve Seat Inserts Differences of Behavior between Filtering Hydrocyclones with Bradley and Rietema Geometries Evaluation of Different Routes for HDH Processing of Ti-6Al-4V Alloy Plasma Dewaxing and Sintering of Compacted Unalloyed Iron The Energy Balance during Plasma Sintering Conjoined Influence of Five Variables in Laboratory Scale Column Flotation Influence of Powder Geometry on Powder Injection Molding Process Parameters Properties of Sr-Doped Lanthanum Manganites for SOFC Structure and Properties of Rapidly Solidified P/M Samples of Al-Mn-Cr Alloys Nitrogen Sintering of High Speed Steel Processed by Starch Consolidation Modulus of Rupture Evaluation on P/M Cold Worked Tool Steels Submitted to Gas Nitriding Effect of Refractory Element Additions on the Properties of Sintered Stainless Steels Microstructure of Spray Formed Fe83Nb4ZrTiB9Cu2 Alloy Spreading Mechanism of Molten Al-Alloys on TiC Substrates Solidification of the Non Dendrite-Forming Pb-16wt%Sn Alloy During Spray Forming Mechanical and Microstructural Characterisation of Cylinder Liners Grain Growth and Mechanical Properties of Spray Formed Al/SiC Composites Microstructure of Spray Formed 2.9%C-22%Cr High Chromium White Cast Iron Particle Size Distribution in the Radial Direction of the Spray Cone and its Influence on the Formation of Porosity in Fe-6%Si Alloy Processed by Spray Forming Influence of the Process Parameters in the Microstructural Evolution of Fe-6.5% Si Alloy Processed Via Spray Forming Microstructural Characterization of Spray Formed Ni-Al-Cr-C Alloys Recycling of Polymeric Matrix Composites Oil Removal from Sintered Iron Using Plasma DC Discharge The Influence of Iron Powder Grade and Manganese Carrier on the Homogeneity Modulus of Sintered Mn Steels Preliminaries Studies in Si3N4-SiC(w) Ceramic Composites with Rare Earth Concentrate (CTR) Aids Influence of Yttrium Oxide Doping on the Microstructures of Alumina-Niobium Carbide Composites Densification of Reactive Milled Al2O3-TiC Composite Powders Study of the Effects of the Atmosphere on the Wettability of SiC by Copper Alloys Wetting of Silicon Carbide by Cu-Si Alloys Al2O3-Ni3Al Composites Obtained by Reactive Milling and Reactive Sintering Sintering Behavior of Alumina-Niobium Carbide Ceramics from Polymer-Filler Mixtures Development and Characterization of Si-Al-O-N-C Ceramic Composites Obtained from Polysiloxane-Filler Mixtures Gelcasting Ceramic Foams with Alternative Gelling Agents Synthesis of Aluminium Titanate Powder by Sol-Gel Technology Cubic Polycrystalline Zirconia Stabilized with Yttrium and Rare Earth Oxide Mixture: Processing, Phase and Microstructure Characterization Processing and Characterization of Active Silica Obtained from Rice Husk Ash Mixture Design and Response Surface Analysis of Pozzolanic Products Influence of the Mixing Speed and Time on the Mechanical and Physical Properties of Laminated Ceramic Plates Characterization and Adsorption of Phenol by Organophilic Clays Evaluation of Hardness and Fracture Toughness of TZP Ceramics Stabilized with Yttria Concentrates Finite Element Simulation of Ceramic Powder Isostatic Pressing Process Using Material Parameters for Uniaxial Compaction Influence of Microstructural Characteristics on the Mechanical Properties of Silicon Nitride with Al2O3, Y2O3 and Nd2O3 as Sintering Aids The Role of Light Rare Earths in the Thermal Degradation Behaviour of ZrO2-CeO2-Y2O3 Ceramics Elastic Modulus Determination of ss-Si6-xAlxOxN8-x with Rare Earth Concentrate by Dynamic Mechanical Analysis Oxygen Mobility in Bi:Sr:Ca:Cu:O Ceramic Measured using Anelastic Relaxation Methods Sintering Behavior of Aluminum Nitride Doped with Y2O3 The Influence of the Sintering System on PMN Properties Diffusive Phenomena at Si3N4/Glass Interfaces Sintering Behavior of Tetragonal Zirconia Ceramic Stabilized with Yttria and Rare Earth Oxide (YRE) Mixtures Mechanical Characterization of Alumina-Doped Tungsten Carbide Analysis of Mechanical Properties in Si3N4 - SiC(w): Gas-Pressure and Hot Uniaxial Pressing Sintering Comparison of Physical and Mechanical Properties in the Ceramic Materials Si3N4-CTR-AlN and Si3N4-Y2O3-AlN The Influence of the Powder Preparation Route on the Sensitivity of TiO2 Doped MgCr2O3 Ceramic Humidity Sensors Microstructural Evolution of Alumina Ultrafine Powders Obtained by High-Energy Milling Mechanical Properties of Al2O3-NbC Composites Produced by Hot-Pressing Spectroscopic Studies of SnO2 doped with Cr, Co or Nb Bonelike Apatite Coating on Ti6A4V: Novel Nucleation Process Using Sodium Silicate Solution Variables that Affect the Indentation Fracture Testing (IF) of a Dental Porcelain Dental Implants: Surface Modification of cp-Ti Using Plasma Spraying and the Deposition of Hydroxyapatite Mechanical Behavior of Hip Implant Constituted of a Ceramic Sphere and Stem of Polyurethane Resin Synthesis of ZrO2-Based Ceramics for Applications in SOFC Qualitative Analysis of Silicon Nitride Synthesized by Ammonolysis of Silicon Tetrachloride Al2O3/Mullite/SiC Powders Synthesized by the Microwave-Assisted Carbothermal Reduction of Kyanite Ni-Zn Ferrite Nanoparticles Prepared by Combustion Reaction Microwave Synthesis of Ni-Zn Ferrite Powders Preparation and Characterization of Ce0.8Gd0.2O1.9 Solid Electrolyte by Polymeric Precursor Techniques Study of the Mechanical Performance of Composites of Rubber Powder and Cement A Method for the Digital Image Analysis of Ceramic Grains Based on Shape Factor Segmentation Experimental Evaluation of Conical-Cylindrical Thickeners Operanting with Aqueous Barium Sulfate Suspensions Characterization of the Stoichiometric Ratio O/U in UO2 Samples by Gravimetric and Voltammetric Methods Recycling of a Petroleum Waste in Ceramic Bodies Quantitative Phase Analysis of Ceramic Raw Materials Using a Non-Negative Least Squares Routine Magnetic Susceptibility and Saturation Magnetization of some Carbonyl Iron Powders used in Magnetorheological Fluids

「Nielsen BookData」 より

詳細情報

• NII書誌ID(NCID): BA61793634
• ISBN:
  • 0878499121
• 出版国コード: sz
• タイトル言語コード: eng
• 本文言語コード: eng
• 出版地: Zurich-Uetikon, Switzerland
• ページ数/冊数: xviii, 769 p.
• 大きさ: 25 cm
• 親書誌ID:
  • BA00294222