Progress in advanced materials and processes, YUCOMAT V : proceedings of the fifth Yugoslav Materials Research Society, held at Herceg - Novi, Serbia and Montenegro, September 15-19, 2003

著者

• Uskoković, Dragan P.
• Milonjić, Slobodan K.
• Raković, Dejan I.

書誌事項

Progress in advanced materials and processes, YUCOMAT V : proceedings of the fifth Yugoslav Materials Research Society, held at Herceg - Novi, Serbia and Montenegro, September 15-19, 2003

edited by Dragan P. Uskoković, Slobodan K. Milonjić, Dejan I. Raković

（Materials science forum, v. 453-454）

Trans Tech Publications, c2004

タイトル別名

YUCOMAT 5

注記

Includes bibliographical refernces and indexes

内容説明・目次

内容説明

Volume is indexed by Thomson Reuters CPCI-S (WoS). These proceedings, PROGRESS IN ADVANCED MATERIALS AND PROCESSES, include selected papers which were presented at the Fifth Yugoslav Materials Research Society Conference (Yu-MRS Meeting), held in Herceg Novi, Yugoslavia, September 15-19th, 2003. The previous four conferences were also held there, and the Yugoslav Materials Research Society was formed as a non-governmental, non-profit, scientific association, whose main goals and tasks are to encourage creativity in materials science and engineering, to achieve the harmonic coordination of these fields in Serbia and Montenegro, and to link these researches to analogous activities carried out worldwide; in order to incorporate them into international - even global - programs. Materials science and engineering involve the acquisition of knowledge concerning the synthesis and processing of materials, their composition and structure, properties and behaviour, characteristics and potential, and their application in devices, machines, consumer units and other finished products. Our economic prosperity, quality of life and hopes for a healthy environment are closely connected with improvements in existing products and the development of new ones together with their associated processing technologies.

目次

Towards SiGe Terahertz VCSELs Comparison of Direct Numerical Procedure and Monte Carlo Technique to Determine the Charging Effects in Submicron Structures Data Bases for Modeling Plasma Devices for Processing of Integrated Circuits Optimization of Intersubband Optical Nonlinearities in Continually Graded AlGaN Quantum Well Structures Surface Density Analytical Model of Two-Dimensional Electron Gas in HEMT Structures Thermodynamics of Mechanical Oscillations in Superlattices Study of the Increased Temperature Influence on the Degradation of the Photodetectors through Ideality Factor Metal-Induced Crystallization of Polycrystalline Silicon by In-Situ Excimer Laser Annealing During Low-Pressure CVD Growth Applications of ZrO2 - CeO2 - La2O3 Films in Multilayered Oxide Heterostructures The Effect of Various Parameters on the Structure of W-Ti Thin Films Plasma Oxidation of Salt Bath Nitrided C 15 Steel Samples Vortex Phases in Bi2Sr2CaCu2O8+ Single Crystals in Tilted Magnetic Fields Structure Prediction of Solids: Heuristic Algorithms for Local Optimization on Hartree-Fock Level Dispersion of Refractive Index of Non-Crystalline Chalcogenides in Cu-As-Se System Oxidation State of Copper Ions in ZSM-5 Zeolite Influence of Annealing on Structure and Magnetic Properties of Laves Phase HfFe2 Site Occupation Preferences in Multicomponent Semiconductors: The Cd1-xZnxTe Case Structural Properties of Pb1-xMnxTe Alloys Body Ni-Doped Glassy Carbon: Physical and Electrochemical Characterization Apparent Enthalpies of Activation for Oxygen Reduction at Pt3Co Electrode in Alkaline Solution Underpotential Temperature Dependence Deposition of Hydrogen on MoPt3 Alloy in Acid Solution Study of Supported Pt and PtRu Catalysts in Methanol and Formic Acid Oxidation Corrosion of Ti3SiC2 and Ti4AlN3 in Concentrated HCl Solutions The Influence of Oxide Sol Properties on the Capacitive Behaviour of Carbon Supported Hydrous Ruthenium Oxide Electrochemical Polymerization of 2- Methyl-1- Naphthylamine in an Acidic Perchlorate Aqueous Medium Electrolytic Hydrogenation of Glucose on Amalgamated Zinc in Sulphate Solutions Thermal and Conductivity Analyses of Alkaline Earth Salts of 12-Tungstophosphoric Acid Physicochemical Properties of Al-Pillared Montmorillonite Doped with 12-Tungstophosphoric Acid Surface Composition and Adsorption Properties of Activated Carbon Cloth TiAl - A New High Temperature Material for Turbocharger Rotors The Influence of Microstructure on Ductile Fracture Initiation in Low-Alloyed Steel Fracture Toughness Modeling in High-Strength Al-Based Alloys Aging Effects in Cu-Zn-Al Shape Memory Alloy DSC Investigation of High-Copper AlCuMg Alloys Dimethyldichlorosilane Hydrolysate as a Substitute for Cyclic Monomers in the Preparation of Functional Poly(siloxane)s Microstructure and Hydrogen Desorption in Nanostructured MgH2-Fe Synthesis of Carbon Nanostructures with Mechanical Alloying Microemulsion Synthesis of MnZn-Ferrite Nanoparticles Synthesis of Nanocrystalline Nickel-Zinc Ferrites via a Microemulsion Route Crucial Role of Alkyl-Substituted Benzenes in the Formation of Intercalate Derivatives of C60 Laser Induced Synthesis of Ultrafine Anatase TiO2 Powders n-Alkane Nanoparticles in Cryogenic Trichlorofluoromethane/n-Alkane Systems: Their Use in the Study of the -Basicity of n-Alkanes Characterization of Nanoporous Lanthanide-Doped YAG Powders Obtained by Propellant Synthesis Introduction of Pt and Pd Nanoclusters in Zeolite Cavities by Thermal Degradation of Acetylacetonates EPR Study of Manganese in Cd1-xMnxS Quantum Dots Raman/ Rayleigh Study of Nanophases Optical Diagnostics of Carbon Arc and Induction Plasmas Thermal Diffusivity of Cold Sintered Co Photoacoustic Properties of Single Crystal NiO Far-Infrared Phonon Spectroscopy of Cd1-xMnxS Quantum Dots Raman Spectroscopy of Polycrystalline - MnSe Sorption Mechanisms and Sorption Models New Method of Porous Oxide Synthesis: Alumina and Alumina Based Compounds Aging of a Commercial Al-Cu-Si Based Alloy Modified with Germanium Modeling of Electrophoretic Deposition of Oxides on C/C-SiC-Composites Electrophoretic Deposition of Thin SOFC-Electrolyte Films on Porous La0,75Sr0,2MnO3- Cathodes Sol-Gel Route for Electrophoretic Deposition of Mullite Diffusion Barriers on C/C-SiC Composites Electrophoretic Deposition of Boehmite Coatings on Titanium from Aqueous Sols Modification of Carbon Cloth by Interaction with Pulsed TEA CO2 Laser The Influence of the Solid/Liquid Ratio on the Point of Zero Charge of Alumina Synthesis, Preparation and Properties of New Fe-Based Soft Magnetic Amorphous Alloys with a Large Supercooled Liquid Region Crystallization Kinetics of Fe-B Based Amorphous Alloys Studied In Situ by X-Ray Diffraction and Differential Scanning Calorimetry Investigation of Magnetic Susceptibility in an Amorphous Fe43,2Ni23,2Co13,6B20 System Properties of LiMn2O4 Powders Obtained by Ultrasonic Spray Pyrolysis The Effect of Reversing Current on the Properties of Copper and Electrolytic Copper Powder. I. The Morphology of Powder Particles The Effect of Reversing Current on the Properties of Copper and Electrolytic Copper Powder. II. The Apparent Density and Flowability of Powders Nicolson-Ross Analysis of Absorption Coefficients of Nickel and Nickel-Zinc Ferrite Powders Prepared Using a Novel Method Hydrogen Absorption and Desorption Kinetics in Nickel and Cobalt Alloy Powder Mechanochemical Activation in Synthesis of LaTi0.5Mg0.5O3 Perovskite-Type Oxides The Influence of Mechanical Activation on the Stoichiometry and Defect Structure of a Sintered ZnO-Cr2O3 System Mechanochemical Synthesis of CaTiO3 from CaCO3 - TiO2 Mixture Enhancing Synthesis and Sintering of Zinc Titanate Using Mechanical Activation A Phenomenological Analysis of Sintering Kinetics of Alumina Phase Evolution of Si3N4 Ceramic with Additives from Li2O-Y2O3 DPR Analysis of Microstructural Evolution of ZnO Ceramics Screen Printed BaTi1-xSnxO3 Multilayer Materials Effects of Stacking Sequence on the Strength of Cross-Ply and Quasi-Isotropic Carbon/Epoxy Laminates Scratch and Abrasion Resistant Polymeric Nanocomposites - Preparation, Characterization and Applications Characterization of Cold-Rolled Cu-Nb Composite Chain Conformational Statistics and Mechanical Properties of Elastomer Composites Increased Stability of C/C-Composite towards Catalytic Oxidation Fatigue Damage Detection in Composite Rods Using Fiber Optic Intensity Based Sensors The Effect of Polar Aluminium Trihydrate Molecules on the Dielectric Relaxations of Low-Density Polyethylene The Effect of Nucleants on the Crystallization Behavior of Isotactic Polypropylene Effects of Structure Characteristics on Mechanical Properties of Aluminum Alloy Matrix Composites Polymer Conformational Transitions: A Quantum Decoherence Theory Approach Gibbson: Peptide Plane as a Unique Biological Nanostructure Preparation and Properties of Polymeric and Composite Bioresorbable Barrier Membranes An Investigation of the Dehydration of Superabsorbing Polyacrylic Hydrogels Cell Support Studies Aimed for Cartilage Tissue Engineering in Perfused Bioreactors Hydroxyapatite as a Root Canal System Filling Material: Cytotoxicity Testing In Vitro and In Vivo Investigation of Collagen - C60(OH)24 Interaction Investigation of Thermal Stability and Kinetic Studies of Transition Metal Complexes with the Condensation Product of 2,6-Diacetylpyridine and Semioxamazide

「Nielsen BookData」 より

詳細情報

• NII書誌ID(NCID): BA66914587
• ISBN:
  • 0878499407
• 出版国コード: sz
• タイトル言語コード: eng
• 本文言語コード: eng
• 出版地: Zuerich, Switzerland
• ページ数/冊数: xix, 583 p.
• 大きさ: 25 cm
• 親書誌ID:
  • BA00294222