Advances in materials science for eEnvironmental and nuclear technology

著者

• Materials Science & Technology ... Conference & Exhibition
• American Ceramic Society
• Fox, Kevin
• Hoffman, Elizabeth
• Manjooran, Navin
• Pickrell, Gary
• Sundaram, S. K.
• Ohji, Tatsuki

書誌事項

Advances in materials science for eEnvironmental and nuclear technology

edited by Kevin Fox ... [et al.]

（Ceramic transactions, v. 222, 227）

John Wiley & Sons , American Ceramic Society, c2010-c2011

• [I]
• II

注記

Includes bigliographical references and index

"The Materials Science and Technology 2009 Conference and Exhibition (MS&T'09) was held October 25-29, 2009 in Pittsburgh, Pennsylvania."--[I] pre.

"The Materials Science and Technology 2010 Conference and Exhibition (MS&T'10) was held October 17-21, 2010, in Houston, Texas."--II pre.

Editors of [I]: Kevin Fox, Elizabeth Hoffman, Navin Manjooran, Gary Pickrell

Editors of II: S.K. Sundaram, Tatsuki Ohji, Kevin Fox, Elizabeth Hoffman

内容説明・目次

巻冊次

[I] ISBN 9780470927298

内容説明

The Materials Science and Technology 2009 Conference and Exhibition (MS&T'09) was held October 25-29, 2009, in Pittsburgh, Pennsylvania. A major theme of the conference was Environmental and Energy Issues. Papers from three of the symposia held under that theme are included in this volume. These symposia include Materials Solutions for the Nuclear Renaissance; Green Engineering and Environmental Stewardship; and Nanotechnology for Energy. These symposia included a variety of presentations with sessions focused on sustainable energy, photovoltaics, nanowires and composites, energy harvesting, catalysts, thin films, corrosion, nuclear fuels, materials in aggressive environments, glass and ceramics for waste disposition, modeling and thermal properties, and education. Also included was a series of invited presentations and an international panel discussion on cement waste forms. The Green Engineering and Environmental Stewardship symposium was sponsored by the Nuclear and Environmental Technology Division (NETD) of The American Ceramic Society while the Materials Solutions for the Nuclear Renaissance symposium was sponsored by NETD and ASM International.

目次

Preface. MATERIALS SOLUTIONS FOR THE NUCLEAR RENAISSANCE. Irradiation Effects in Ceramics for Plutonium Disposition (C. Davoisne, W. E. Lee, M. C. Stennett, N. C. Hyatt, N. Peng, and C. Jeynes). Synthesis and Structures of Gd2 (Zr2-xCex)O7: A Model Ceramic System for Plutonium Disposition (D. P. Reid, M. C. Stennett, and N. C. Hyatt). Waste Form Development for SRS MOX Plant Effluent (Erich Hansen, Timothy Jones, Tommy Edwards, and Alex Cozzi). Flammable Gasses in the Saltstone Process Flowsheet (A. D. Cozzi). Development of Crystal-Tolerant Waste Glasses (J. Matyas, J. D. Vienna, A. Kimura, M. Schaible, and R. M. Tate). Phase Stability of Defense Waste Processing Facility (DWPF) Type High Level Nuclear Waste Glasses (Amanda L. Billings, Carol M. Jantzen, Connie C. Herman, and Sharon L. Marra). Alkali/Akaline-Earth Content Effects on Properties of High-Alumina Nuclear Waste Glasses (J. S. McCloy, C. Rodriguez, C. Windisch, C. Leslie, M. J. Schweiger, B. R. Riley, and J. D. Vienna). Nepheline Crystallization in Nuclear Waste Glasses (Kevin M. Fox, David K. Peeler, and Thomas B. Edwards). Cold Crucible Vitrification of SRS SB4 HLW Surrogate at High Waste Loadings (A. P. Kobelev, S. V. Stefanovsky, V. V. Lebedev, D. Y. Suntsov, M. A. Polkanov, O. A. Knyazev, and J. C. Marra). An Extraction of Platinum Group Metals and Molybdenum from Molten Borosilicate Glass Using Cu and Cu5Si (Kazuyoshi Uruga). Microstructure of Laser-Melted Zirconium Carbide Ceramics (H. F. Jackson, D. D. Jayaseelan, W. J. Clegg, M. J. Reece, F. Inam, D. Manara, C. Perinetti Casoni, and W. E. Lee). On the Mechanism of Radiation Damage in Zircon by High-Energy Electrons (N. Jiang). Anelasticity in Austenitic Steels (Ashwin Rao, P. John Bouchard, and Michael E. Fitzpatrick). Molten Salts for Nuclear Cogeneration (Luke Olson, James Ambrosek, Guoping Cao, Kumar Sridharan, Mark Anderson, and Todd Allen). GREEN ENGINEERING AND ENVIRONMENTAL STEWARDSHIP. Development of Low-Cost Functional Geopolymeric Materials (Mazen Alshaaer, Faten Slaty, Hani Khoury, Hubert Rahier, and Jan Wastiels). Green Technology for Extraction of Iron from Ores and Other Materials (Allen W. Apblett and Kevin Barber). Nanotechnology for Uranium Separations and Immobilization (Kevin Barber, Allen W. Apblett, Sulaiman Al-Fadul, Alan Piquette, and Mohamed Chehbouni). How the Classic Materials Science Stool is being Changed by the Sustainability Stool (Marsha S. Bischel and Amy A. Costello). Impact of Materials Selection on the Sustainability of Wind Energy (Davion M. Hill and Narasi Sridhar). Precipitation Behavior of Chromium in Chromium(IH)-Bearing Slag (Xingrong Wu, Liaosha Li, Ping Wang, Zhaojin Wu, and Yuanchi Dong). Improved Energy Efficiency and Environmental Benefits for Calcium Treatment in Steel (James Yanker and David Dudek). NANOTECHNOLOGY FOR ENERGY. Optical Characterization of Chemically Deposited SbCuS Thin Films (Chinedu Ekuma, Mishack Nnabuchi, Nwabueze Aja, and Israel Owate). Examining Defects in Solid Core 2-D Photonic Band-Gap Fibers with High Index Inclusions (Neal T. Pfeiffenberger and Gary R. Pickrell). Nanophased Materials in Supercritical CO2: Ceramic Nanopowder Synthesis, Encapsulation and Deposition (J. C. Ruiz, F. Charton, S. Sarrade, A. Hertz, B. Fournel, A. Julbe, and C. Guizard). Influence of Gas Flow Rate on the Formation of ZnO Nanorods and Their Effects on Photoelectrochemical Response (Sudhakar Shet, Kwang-Soon Ahn, Ravindra Nuggehalli, Yanfa Yan, Todd Deutsch, John Turner, and Mowafak Al-Jassim). Nanocoating Enhanced Optical Fiber Sensors (M. Smietana, W. J. Bock, J. Szmidt, and G. R. Pickrell). Surface Plasmon Resonant Enhanced Optical Transmission through ZnO/Ag/ZnO Multilayered Films (Pangpang Wang, Dongyan Zhang, Chang Huang, Xiaoping Song, and Ri-ichi Murakami). Controlled Shape Synthesis of BaTiO3-(Mn0.5Zn0.5)Fe2O4 Nanocomposites (Yaodong Yang, Wenwei Ge, Shashank Priya, Yu U. Wang, Jie-Fang Li, and D. Viehland). Author Index.

巻冊次

II ISBN 9781118060001

内容説明

This book contains 29 papers from the Clean Energy: Fuel Cells, Batteries, Renewables; Green Technologies for Materials Manufacturing and Processing II; and Materials Solutions for the Nuclear Renaissance symposia held during the 2010 Materials Science and Technology (MS&T'10) meeting, October 17-21, 2010, Houston, Texas. Topics include Batteries; Corrosion and Materials Degradation; Fuel Cells & Electrochemistry; Fossil Energy Materials; Solar Energy; Waste Minimization; Green Manufacturing and Materials Processing; Immobilization of Nuclear Wastes; Irradiation and Corrosion Effects; and Materials Performance in Extreme Environments.

目次

Preface ix CLEAN ENERGY: MATERIALS, PROCESSING, AND MANUFACTURING. Slag Characterization for the Development of New and Improved Service Life Materials in Gasifiers using Flexible Carbon Feedstock 3 James Bennett, Seetharaman Sridhar, Jinichiro Nakano, Kyei-Sing Kwong, Tom Lam, Tetsuya Kaneko, Laura Fernandez, Piyamanee Komolwit, Hugh Thomas, and Rick Krabbe Characterization of Electrochemical Cycling Induced Graphite Electrode Damage in Lithium-Ion Cells 17 Sandeep Bhattacharya, A. Reza Riahi, and Ahmet T. Alpas Titanium-Dioxide-Coated Silica Microspheres for High-Efficiency Dye-Sensitized Solar Cell 27 Devender and Ajay Dangi Effect of Titanium and Iron Additions on the Transport Properties of Manganese Cobalt Spinel Oxide 33 Jeffrey W. Fergus, Kangli Wang, and Yingjia Liu Effect of Hydrogen on Bending Fatigue Life for Materials used in Hydrogen Containment Systems 39 Patrick Ferro Investigation of Secondary Phases Formation Due to PH3 Interaction with SOFC Anode 51 Huang Guo, Gulfam Iqbal, and Bruce Kang PEN Structure Thermal Stress Analysis for Planar-SOFC Configurations under Practical Temperature Field 61 Gulfam Iqbal, Suryanarayana Raju Pakalapati, Francisco Elizalde-Blancas, Huang Guo, Ismail Celik, and Bruce Kang Electroless Coating of Nickel on Electrospun 8YSZ Nanofibers 69 Luping Li, Peigen Zhang, and S.M. Guo Effect of Surface Condition on Spallation Behavior of Oxide Scale on SS 441 Substrate used in SOFC 81 Wenning Liu, Xin Sun, Elizabeth Stephens, and Moe Khaleel Effect of Fuel Impurity on Structural Integrity of Ni-YSZ Anode of SOFCs 87 Wenning Liu, Xin Sun, Olga Marina, Larry Pederson, and Moe Khaleel Strategies to Improve the Reliability of Anode-Supported Solid Oxide Fuel Cells with Respect to Anode Reoxidation 101 Manuel Ettler, Norbert H. Menzler, Georg Mauer, Frank Tietz, Hans Peter Buchkremer, and Detlev Stoever Mixed Composite Membranes for Low Temperature Fuel Cell Applications 111 Uma Thanganathan Carbonate Fuel Cell Materials and Endurance Results 119 C. Yuh, A. Hilmi, G. Xu, L. Chen, A. Franco, and M. Farooque MATERIALS SOLUTIONS FOR THE NUCLEAR RENAISSANCE. Characterization of Core Sample Collected from the Saltstone Disposal Facility 135 A.D. Cozzi and A.J. Duncan Incorporation of Mono Sodium Titanate and Crystalline Silicotitanate Feeds in High Level Nuclear Waste Glass 149 K. M. Fox, F. C. Johnson, and T. B. Edwards Radiation Resistance of Nanocrystalline Silicon Carbide 161 Laura Jamison, Peng Xu, Kumar Sridharan, and Todd Allen Performance of a Carbon Steel Container in a Canadian Used Nuclear Fuel Deep Geological Repository 169 Gloria M. Kwong, Steve Wang, and Roger C. Newman Development of Ceramic Waste Forms for an Advanced Nuclear Fuel Cycle 183 A. L. Billings, K. S. Brinkman, K. M. Fox and J. C. Marra, M. Tang, and K. E. Sickafus Determination of Stokes Shape Factor for Single Particles and Agglomerates 195 J. Matyaa, M. Schaible, and J. D. Vienna Glassy and Glass Composite Nuclear Wasteforms 203 Michael I. Ojovan and William E. Lee Advances In Materials Corrosion Research in the Yucca Mountain Project 217 Raul B. Rebak Creep Studies of Modified 9Cr-1 Mo Steel for Very High Temperature Reactor Pressure Vessel Applications 231 Triratna Shrestha, Mehdi Basirat, Indrajit Charit, Gabriel Potirniche, and Karl Rink Developing the Plutonium Disposition Option: Ceramic Processing Concerns 241 Jonathan Squire, Ewan R. Maddrell, Neil C Hyatt, and Martin C. Stennett Pore Structure Analysis of Nuclear Graphites IG-110 and NBG-18 251 G. Q. Zheng, P. Xu, K. Sridharan, and T. R. Allen GREEN TECHNOLOGIES FOR MATERIALS MANUFACTURING AND PROCESSING. Modified Powder Processing as a Green Method for Ferrite Synthesis 263 Audrey Vecoven and Allen W. Apblett Novel Method for Waste Analysis using a Highly Luminescent (II) Octaphosphite Complex as a Heavy Metal Detector 279 NisaT. Satumtira, AN Mahdy, Mohamed Chehbouni, Oussama ElBjeirami, and Mohammad A. Omary Geopolymer Products from Jordan for Sustainability of the Environment 289 Hani Khoury, Yousif Abu Salhah, Islam AI Dabsheh, Faten Slaty, Mazen Alshaaer, Hubert Rahier, Muayad Esaifan, and Jan Wastiels Leaching of Calcium Ion (Ca2+) from Calcium Silicate 301 Vandana Mehrotra Green Energy and Green Materials Production Activity and Related Patents 313 J. A. Sekhar, M. C. Connelly, and J. D. Dismukes Micro Patterning of Dielectric Materials by using Stereo-Lithography as Green Process 329 Soshu Kirihara, Naoki Komori, Toshiki Niki, and Masaru Kaneko Author Index 337

「Nielsen BookData」 より

詳細情報

• NII書誌ID(NCID): BB03079620
• ISBN:
  • 9780470927298
  • 9781118060001
• 出版国コード: us
• タイトル言語コード: eng
• 本文言語コード: eng
• 出版地: Hoboken, NJ,[Westerville, Ohio]
• ページ数/冊数: v.
• 大きさ: 25 cm
• 親書誌ID:
  • BA06690812