Advanced manufacturing technology : selected papers from the 2011 International Conference on Advanced Design and Manufacturing Engineering (ADME 2011) 16-18 September, 2011, Guangzhou, China
Author(s)
Bibliographic Information
Advanced manufacturing technology : selected papers from the 2011 International Conference on Advanced Design and Manufacturing Engineering (ADME 2011) 16-18 September, 2011, Guangzhou, China
（Advanced materials research, v. 314-316）
Trans Tech Publications, c2011
- : [set]
- Part 1
- Part 2
- Part 3
Available at / 1 libraries
-
No Libraries matched.
- Remove all filters.
Note
Includes bibliographical references and indexes
Description and Table of Contents
Description
This collection of peer-reviewed papers covers the subject areas of surface engineering/coatings, modeling, analysis and simulation of manufacturing processes, materials processing technology, mechanical behavior and fracture, computer-aided materials design, tooling testing and evaluation of materials, thermal engineering theory and applications, CAM/CAE, high-speed/precision machining and inspection technology, micro-machining technology, laser processing technology, bionic mechanisms and bio-manufacturing, digital manufacture and management, and other related topics. The work thus provides a thorough and up-to-date coverage of the topics.
Volume is indexed by Thomson Reuters CPCI-S (WoS).
Table of Contents
Preface and Organizing Committee
Surface Engineering/Coatings
Experimental Study on Laser Surface Cladding of Ni60 Alloy on AZ31B Magnesium Alloy
Transparent Glass Window with Energy-Saving and Heat Insulation Capabilities
Development and Experiment of Surface Engineering Technology on Mulberry Silk Brocade Fabrics
Cladding of Tantalum and Niobium on Titanium by Electron Beam, Injected in Atmosphere
The Research on Cylindrical Ultrasonic Rolling Machining Used for Strengthening Metal Surface
Microstructure and Properties of Carbonitride Alloying Self-Shielded Wear-Resistant Coatings by HVAS
Investigation of Laser Parameters Influence of Direct-Part Marking Data Matrix Symbols on Aluminum Alloy
Curvature Testing the Residual Stresses in 3%TiO2-Al2O3 Coatings by Thermal Spraying Technology
Surface Properties of TiN Films on AZ 31 Magnesium Alloys Deposited by Magnetron Sputtering Technique
The Effect of Particle Concentration and Magnetic Field on Tribological Behavior of Magneto-Rheological Fluid
Application of Multi-Layer Composite Membrane in Tricone Bit Bearing
Experimental Study on Hot Bending of 22MnB5 Steel
Microstructure and Property of Cold Sprayed Copper Coating
Tribological Properties of FeCrNi/CBN Composite Coating with Spraying High Velocity Arc
Simulation of the Effect of Process Parameters on Particle Velocity in Cold Spray Using Laval Nozzle with Nine Holes
Synthesis and Properties of Poly-Acrylate Emulsion Modified by Organ Silicone
Application of Taquchi Method in the Optimization of PTA Hardfacing Process
A New Processing Way for Helicoid Reflective Mirror
Effect of Working Current on Microstructure and Properties of Cylinder Hardened by Plasma Beam at Junction of the Hardening Traces
A Maya Geometry Slices Generation Method for Volumetric 3D Display
Double Glow Plasma Hydrogen-Free Carburizing on the Surface of Purity Titanium
Optical Sensitivity of Electrospun Fibers Containing Quinoxalines Derived with Metal Ion Chelating Agent
Softening Kinetics in Nb-Microalloyed TRIP Steels with Increased Mn Content
Simulation Study on Anti-Reflective Effects for Different Submicron-Structures
The Dynamics Analysis Based on Matlab for the Electro-Hydraulic Servo Drive Device
Effect of Abrasive and Surfactant on Chemical Mechanical Polishing of Hard Disk Substrates
Study on Tribology Properties of Graphite/TiC/Ni-Base Alloy Composite Coating
Friction and Wear Properties of Laser Cladding Coatings under Boundary Lubrication Conditions
Compare of Wear Properties and Analysis of Wear Mechanism about TC4 Alloy and P110 Tubing Steel in Dry Condition
Brush Plating Technology of LY11 Duralumin Alloy
Preparation of Anti-Oxidation Coating on Billet Heating for Silicon Steel
Preparation and Study of Cr-Nanodiamond Composite Co-Deposition
Study on Electrospark Depositing & Welding Power Supply
Effect of the Corona Discharge on ZnTe Film
Influence of Powder Type and Substrate Hardness on the Deposition Behavior of WC-17Co Particle in Cold Spraying
Properties of Electrodeposited Ni-SiC Composite Coatings on MB8 Wrought Magnesium Alloys
Durability of Low Pressure Plasma Sprayed MoB/CoCr Coating on 310S Stainless Steel in Molten Al-12.07wt.%Si Alloy
An Interfacial Damping Model for Hard Coating Structure
Investigation of Laser Current Influence on Two-Dimensional Bar Code Contrast
Surface Modification of Poly (M-Phenylene isophthalamide) Fibers and its Effect on the Mechanical Properties of Aramid Sheets
Influence of Hollow Cathode Electron Beam on TiAlN Films Prepared by Multi-Arc Ion Plating
Study on Iridium Coating Produced by Double Glow Plasma
Improved Wear Resistance of Magnesium Alloy Irradiated by High-Intensity Pulsed Ion Beam at Lower Energy Density
Understanding the Enhancement of Coating's Thermal Cracking Resistance by Multiple Segmentation
Influence of Additive on High Temperature Performance of Glaze
The Microstructure of Ni/ZrO2 Infiltrated Composite Layer
Effects of Hypophosphate Concentrations on the Characteristics of Micro-Arc Oxidation Coatings Formed on Biomedical NiTi Alloy
Effect of Laser Cladding Technologies on Microstructure and Properties of Ni-Based WC Alloy Coatings
Effect of Atomic Oxygen Exposure on Si Implanted Siloxane Coatings in Low Earth Orbit Environment
Microstructure and Wear Behavior of SiCP-Reinforced Magnesium Matrix Composite by Cold Spraying
Influence of Ultrasonic on the Microstructure and Properties of Electroless Plating Ni-Co-P Coating at Low Temperature
Investigation into Tribological Properties of TD-Treated D2 Steel for Applications in Dry Machining of Aluminum Alloy
Studying on Rare Earth Aluminizing Process of GH4169 Superalloy
A New Polyethylene Corrosion Protecting Coating with Ion Selectivity
Formation Mechanism of Nanostructure of HVOF Sprayed Nanostructured WC-17Co Coating
Improving the Performance of HVOF Sprayed WC-Co Coatings Using Statistical Design
Synthesis and Characterization of Silicone-Modified Butyl Acrylate-Methyl Methacrylate Copolymer Latex
Microstructure and Properties of In Situ Synthesized Composite Coating by Tungsten Inert Gas Cladding
New Viscoelastic Magnetic Abrasive and its Surface Finishing Process
Study on the Weldability of ZG30Cr06A Needling Material
Modeling, Analysis and Simulation of Manufacturing Processes
Experimental Study on Seepage Model of Rubber-Plastic Porous Tube
Angular Distortion Analysis on Multipassed Welding of Combined Joint Types Using Thermo-Elastic-Plastic FEM
Pre-Tensioning Fixture Development for Machining of Thin-Walled Components
Investigation on Weld Induced Distortion of Butt and T-Joints Using Thermo-Elastic-FEM and Experimental Study
Simulation Investigation the Effect of Heating-Lines on Tensile Mechanical Properties of Sheet Metal after Laser Scanning
Research on Radio Frequency Wireless Communication Technology
Adaptive Neuro-Fuzzy Inference System Modelling of Surface Roughness in High Speed Turning of AISI P 20 Tool Steel
A 3D Coupled Thermo-Mechanical FE Model for Friction Stir Welding of 7075 Aluminum Alloy Plate
3D Finite Element Analysis of Marine Diesel Engine Connecting Rod
Numerical Simulation on Low-Speed Magnetic Flux Leakage Inspection to Heat Exchanger Pipes
A Novel Silicon-Based Packaging Platform for High-Efficiency LED Modules
Numerical Simulation of Filling Process in Vertical Centrifugal Casting Based on Projection-Level Set Method
Numerical Simulation of Macrosegregation Formation in Binary Alloy Solidification Processing Based on Modified Projection Method
Output Feedback Assignability for Nonlinear Min-Max Systems
Computer Simulation of Heat Treatment Process for Support Plate of Nuclear Reactor
A Mathematical Model for the Generated Gear Tooth Surfaces of Spiral Bevel and Hypoid Gears
Instantaneous Cutting Force Model in High-Speed Milling Process with Gyroscopic Effect
Mathematical Model for Evaluating Roundness Errors by Maximum Inscribed Circle Method
Major Process Quality Control for Light Seal of Piston Ring Based on KPCA and Elman Neural Network
Experiment and Numerical Simulation of Extrudate Swell in the Polymer Extrusion Process
Numerical Simulation of Microstructure Evolution of TC6 Alloy Blade during Finish Forging
Experiment on Hot Rolling Deformation Resistance of Aluminum Alloy and Mathematical Modeling
Quality Diagnosis and Error Compensation Based on Integrated SPC/EPC in MMPs
Effect of Wall Conditions on PVC-R Co-Rotating Conical Twin-Screw Extrusion
Finite Element Analysis of Effects of Preheating and Postweld Heat Treatment on Residual Stress in Pipe Welding
A Quantitative Shape Control Strategy for Hot Tandem Mill
Distributions and Influence Factors of Residual Stresses Induced by Oxygen Cutting Opening in Steel Structure
Study on Metal Flowing Law for Isothermal Extrusion Deformation of AZ31 Magnesium Alloy
Numerical Simulation of the Tunnel Blasting Process in Weak Intercalated Layer
Structural Design and Simulation of a Piezoelectric Peristaltic Pump Driven by Circumferential Traveling-Wave
Study on the Melting Time of Solid Pellets in Melt in a Co-Rotating Twin Screw Extruder
Study on Production Mechanism of End Concavity in Cross Wedge Rolling
Analysis and Research of Mathematical-Physical Models on Simulation of Electrochemical Machining
Process Research on Cold Rolling of Gulley Ball Bearing Inner Ring
Experiments and Simulation of Elastic-Plastic Deformation in Thin Wall Part Milling
Analysis of the Granularity of Task Decomposition in Enterprise Alliance Based on System Dynamics
Effect of Sample Materials on the AFM Tip-Based Dynamic Ploughing Process
Study on Cutting Less-Teeth Gear with the Slotting Tool
Application of Collision and Interference Inspection Algorithm Based on Bounding Box in NC Machining Simulation
Influence of Initial Microstructure on Rheology of Al-Zn-Mg-Cu Alloy during Thermal Compression
Design and Simulation Analysis of Aircraft Dynamic System
Models and Implementation of Integrated Process Planning and Scheduling
Influence of Processing Parameters of Warm Compaction on Green Density of Molybdenum Powder and Compact Defect Analysis
Finite Element Analysis on Structural Stress of 16x16 InSb IRFPA with Viscoelastic Underfill
Solutions for Deadlocked Problem of FMSs Using Theory of Regions
Rolling Force in Hot Rolling of Large Rings
Research on Processing Technology and Cutting Parameter of the Spiral Surface of Screw Rotor
Prediction of Fracture Force of Weld Line Based on Artificial Neural Networks
ANSYS-Based Finite Element Analysis on Automotive Panel Drawing Die
Research and Structure Realization of a New Cleaning Machine for Aluminum Package
Simulation Research on the Impact Mole System in Working State
Buckling Analysis and Experiment of Fiber-Paper Honeycomb Sandwich Structure Composites
A Study on Storing Process of Thermoforming Using Finite Difference Method
Optimal Heater Control in Thermoforming Preheating Using Approximate Function
Experimental Study on Material Removal Rate for Engineering Ceramics Machining with Micro-Detonation of Striking Arc
Effect of Material Parameters Wave on Sheet Metal Springback Using Orthogonal Design Simulation
Influence Regularities of Axial Force of Cross Wedge Rolling Symmetric Shaft-Parts about Technical Parameters
Research on the Blank Design Method of Closed Rolling the High-Neck Flange
Design and Application of High-Speed Variable Pitch End Mill Based on Milling Stability
Estimation of Friction Coefficient Related to Squeal in Cutting
Study on Mechanical Mechanism of ARB Process Based on Randomness
Numerical Simulation of Solidification by SPH in Sand Cast Process
DOE-Based Numerical Investigation on Factors Affecting Temperature Field during Line Heating
Simulation of Temperature Field during the Laser Sintering Process of Nano-Hydroxyapatite Powder
An Optimum-Curved Die-Profile for Investment Casting of Turbo Blades
Numerical Analysis of the Workpiece Velocity in Electromagnetic Forming Process
The Research of Shock Wave Attenuation Test of UHMWPE-PUF Composite by PVDF Piezoelectric Sensor
Investigation of Die Wear during Fine-Blanking Process of a Kind of Automobile Synchronizer Slipper by FEM and Experiments
Finite Element Analysis of Vehicle Engine Connection Rod under Mechanical Load
Optimal Design of Triangle Fastening Screw Thread's Turn Number
Numerical Simulation of Temperature Field and Experimental Verification during Micro-Detonation of Arc Strike Machining
A New Single Step Full Discrete Scheme for a Semilinear Second Order Hyperbolic Equation
Materials Processing Technology
Finite Element Analysis of High - Pressure Grinding Mill
Theoretical Analysis of Blood Alcohol Detection Based on Raman Spectroscopy
Effect of Condenser Temperature and Speed on one A/C System
Foundry Technology of the Pressure Board Steel Casting Based on Proportional Solidification Theory
Research on the Shrinkage Cavity Defect of the Extruded Boss in Fine Blanking Process
Indirect Hot Stamping of Boron Steel 22MnB5 for an Upper B-Pillar
Research on the Mechanism of Interface Strengthening for Ti3Al/TC11 Dual Alloy
Viscous Behaviours of Feedstocks for Micro MIM
The Innovation and Application of the Piercing Process inside of Parts
Stainless Steel Lining High Pressure Reactors Were Tested and Manufactured by Hydraulic Pressure Expanding Method
Velocity and Current Density Evaluation of Combined Plasma Arc for High Temperature Materials Processing by Computational Simulation
Study on the Formability and its Geometric Factors of Seamed Tube Hydroforming
Experimental Study on Sintering Parameters in Selective Laser Sintering for ABS
Physical Properties of Primary Slurry for Titanium Investment Casting
Research Status of Warm Stamping Forming Technology at Domestic and International
Surface Effect Mechanism Analysis for Vibrational Rotary Forging
The Influence of Process Parameters on the Branch Height for Air Handling Unit
Preliminary Study on Prediction Model of Forming Tubular Bulge Height for a Thick-Plate
FVM Simulation of the Effect of Preventing Ring Structure on Continuous Extrusion Process
Comparative Study of Creep and Stress Relaxation Behavior for 7055 Aluminum Alloy
Effects of Extrusion Process on Microstructure of Aluminum Profiles with Different Wall Thickness Sections
Study on Spinning of Pentagonal Cross-Section Hollow-Part Based on Orthogonal Experiment Design
Effect of the Process Parameter on as-Cast 30Cr2Ni4MoV Steel Soundness during Cogging
Experimental Research on Connection of Pipe and Rod by Electromagnetic Impulse
Analysis of the Simulation Movement in Cigarette Packaging Machine Pusher Device
Study on Microstructure Evolution of TA1 during Plane Compression and its Similarity to Power Spinning
Kinematics Analysis and Numerical Method for Multi-Link Suspension
Auto-Body Panel Springback Analysis Using Yoshida-Uemori Model
Constitutive Model of Supper-Alloy IN625 Based on Extrusion Test
Extraction of Niobium from the Bayan Obo Tailings by "Flotation-Microwave Magnetic Roasting-Magnetic Separation"
Mechanism and Experimental Investigation on Silicon Wafer Hybrid Polishing by Ultrasonic-Elliptic-Vibration Chemical-Mechanical
Exploration on Shape of Profiles Determined by Chord Angle Control Method
Quick Plastic Forming Behavior of AZ91 Magnesium Alloy Sheet
Mechanical Behavior & Fracture
The Durability Life Prediction of Recycled Concrete under Chlorate Environment
The Evaluation of Machinability of Inconel-718 and AISI4340
Hardening Behaviours Prediction of TRIP Steels with Pre-Strain
Development of a Novel Deployment Hinge Mechanism for a Spacecraft Using Axiomatic Design
Dislocation Distribution Function of the Mode III Dynamic Crack Subjected to Moving Unit Step Load from a Point
Mechanical Properties Analysis of Combined Structure of Suspension Platform of Suspended Access Equipment
Simultaneous Application of Coda Waves Interferometry (CWI) and Nonlinear Resonance (NR) to Detect Damage in Polymer Concrete
An Orthogonal Experimental Analysis of Electrical Discharge Machining of Particle Reinforced Metal Matrix Composites with Concavo-Convex Electrode
Refined Numerical Simulation and Experimental Investigation on Arc Welded Joints of 6061 Aluminum Alloy
Turning Process Modeling and Cutting Force Investigation Based on Finite Element Analysis and Cutting Experiments
Study on the Relationships between Edge Distance and the Failure Process of Edge Chipping for Engineering Ceramics
Study on Cutting Force and Cutting Temperature of Coated Carbide Turning Inserts with 3D Chip-Breaker
Changes in Elastic and Viscoelastic Properties of Poly(Methyl methacrylate) by Physical Aging
Corrosion Behavior of Twin-Wire Metal Inert Gas Arc Welds in 7A52 Al Alloy Plate
Mechanism and Experimental Research on Copper and Copper Alloy's Manual SHS Welding Technology
Study on Microstructure and Properties of 5A06 Aluminum Alloy Welded Joint by Deep Cryogenic Treatment
Seam Tracking Monitoring Based on Keyhole Features during High-Power Fiber Laser Welding
Spatter Feature Recognition during High-Power Disk Laser Welding
Elucidation of Welding Stability Based on Keyhole Configuration during High-Power Fiber Laser Welding
High Cycle Fatigue Behavior of MB8 Magnesium Alloy
Analysis of Characteristics of Mg Alloy Welded Joint by Laser Welding
Study on Procedure of Bonding-FSSW Hybrid Joints of AZ31 Magnesium Alloy
Diffusion Bonding of 3Y-TZP and SUS440 by Using of Ti-Cu Powder/Sheet
Progressive Failure Study of Discrete-Source Damage in Stiffened Composite Panels
Interface Structure of Be/HR-1Stainless Steel by Vacuum Diffusion Bonding
Experimental and Numerical Studies of the Stress Concentration Factor for Tubular KK-Joints under Axial Loads
Effect of Process Parameters on Welding Variables during Linear Friction Welding of Ti-6Al-4V Alloy
Analysis of the Swelling Effect in Single-Point Diamond Turning
The Study of High Strength Bolt Preload with Hydraulic Tensioner Installation
Study on Screw Drill Wear when Drilling a New Stainless Steel X02Cr18Ni10MoTiN and Accompanying Phenomena in the Cutting Zone
Sheet Metal Forming Limit Prediction with Maximum Thickness Reduction Ratio
Kalman Filtering for Seam Tracking in Master-Slave Robot Remote Welding System
Experimental Study of Plastic Flow during Linear Friction Welding by Physical Simulation Method
Research of High Efficiency Combined Wire Electrochemical Machining Technology and its Application
Techanics Experiment Study on PcBN Cutting Tool Dry Turning Austenitic Stainless Steel AISI 301
Experimental Study on GMAW with Strip Electrode
An Adaptive Memetic Algorithm for Packing Problems of Irregular Shapes
Numerical Simulation of Residual Stresses in Single Pass Butt-Weld of Dissimilar Pipe Joint during the Fusion Welding Process
Effects of Different Solder Alloys on Reliability of 3D PLUS Solder Joint
Virtual Prototype Modeling and Dynamics Analysis of a Large-Scale Wind Turbine's Gearbox
High Speed CO2 Arc Welding Based on Constant Power Control
Analysis of Stress Concentration for Curvilinear Holes by Complex Variable Function Method
Investigation of Machining OCr18Ni9 Stainless Steel under Spraying Liquid Nitrogen
Calculation Method of the Cracking Resistance of Simply Supported Reactive Powder Concrete Plate
The Simulation Analysis of Friction Effect on Cutting Process
Numerical Simulation of Dispersed Phase Flow in a Tube Considering Bubbles Erosion and Cl- Ions Concentration Effects
Characteristics of Thermo-Electromotive Force, Electric Current and Electric Resistance in Intermittent Cutting Process by Face Milling
Study on Tensile Magnetic Memory Characteristics of Demagnetization 16Mn and Q235 Steel
Friction and Wear Behavior of SiCP/Cu Composite Prepared by Powder Injection Molding
Stress Corrosion Cracking of SPV50Q Steel in H2S-Containing Sour Environment
Three-Dimensional Pattern Design of Processing Draft
Research on the Failure Mechanism of Flash Welded Rail
Experimental Research on Ultrasonic Vibration Deep Hole Honing of Titanium Alloy
Preparation of Water-Based No-Clean Flux for High Temperature Lead-Free Solder
Design and Research on the Refitment of Deep-Hole Machine Tool
Anisotropy of Deformation Behavior of AZ31 Magnesium Alloy Sheets
Fault Feature Extraction Based on Improved EEMD and Hilbert Transform
Study on Material Removal in Electrorheological Fluid-Assisted Polishing
Analysis of Forming Mechanism of Thermal Damages on Friction Surfaces of Brake Disc
Study on Wear Properties and Mechanisms of Coated Carbide Tools in Dry Turning of 300M Steel
Numerical Analysis of Stress Field for Simulating Pressure Vessel Nozzles
Experimental Research on Compound and Efficient Powerful Milling Process of Blisk
Constitutive Equation for V-5Cr-5Ti at High Temperatures Measured Using the SHPB Technique
Influence of Phase Content on Hot Deformation Behavior of Ni-Based Superalloy IN718
Effect of Welding Thermal Cycle on the Microstructure and Mechanical Properties in Multi-Pass Submerged-Arc Welding
Experimental Study on Ball End Mill in Glass Machining at High Speed
Simulation of the High-Speed Milling Temperature of Titanium Alloy Ti - 6Al - 4V
Analysis and Experimental Research on Chemical Mechanical Polishing Flow Field
Microstructure and Mechanical Property of GH4169 Joints by Vacuum Diffusion Bonding
Microstructure and Mechanical Property of the ZrB2-Based Ultra-High-Temperature Ceramic Composites Brazed Joint
New Chip Flow Angle Prediction to Investigate the Effects of Ratio of the Cutting Edge Lengths on Chip Flow Using Sharp Corner Tools
Study on Three-Point Bending Mechanical Performance of Thin-Walled Super Alloy Honeycomb Sandwich with Penetrable Defects
Piecing Failure Analysis of Drill Pipe Upset
Influence of Slagging Elements on Manual SHS Welding of Low-Carbon Steel
Based on ANSYS Planetary Gear Ransmission Design Analysis
A New Research of Laser Welding Coaxial Protection Nozzle
Material Design of Computer Aided
Approximation of Coupling Mode and Fitting Alignment in Planar Light Waveguide Packaging
Application of Genetic Algorithm on the Layout of Rectangular
Temperature Numerical Simulation of Laser Penetration Welding Based on Calculated Keyhole Profile
Vector Calculation for Tool Envelope Surface in Five-Axis NC Machining
The Improvement of the Interlock Arm on Ejection Seat Based on the ANSYS
The Finite Element Simulation and Analysis of Polymer Tube Coextrusion Process
Synthesis Error Analysis of NC Manufacturing and Error Prediction Modelling Based on BP Neural Network Technology
The Application of FEA in High-Speed Cutting Tool
Thermodynamic Modeling of the Mg-Ni-La-Cu System
Constitutive Equations for Graphene Based on Anisotropic Theory
Observation of Polypropylene (PP) Melt Flow on Macro and Micro Cavities during Filling Phase of Injection Molding
Ant Colony Algorithm: an Application of Design Self-Balancing Torsion Bar
Warpage and Structural Analysis of Automotive Trim Based on FFD and CAE in Plastic Injection Molding
The Design and Implementation of a CAD/CAE Integrated System for Plastic Injection Molding
Theoretical Research of Aspheric Testing by Using the Digital Moire Patterns Base on the Sub-Region Splicing Method
The Parameters Optimization of Rheology Stress Model for Aluminum Based on GA
Multi-Parameter Design and Simulation of Composite Microstructure
Tooling/Testing and Evaluation of Materials
Solving the Two-Objective Shop Scheduling Problem in MTO Manufacturing Systems by a Novel Genetic Algorithm
A Performance Evaluation of Printing RFID Tags
An Estimation of Resonant Frequency of a Curving RFID Tag
Micro-Scale Abrasive Wear of Soft Materials
Study on the Corrosion Behavior of Two Kinds of Tubing at Different Temperatures
Study on the Relationship between Plastic Viscosity and Tack Value of Picking Liquid
Experimental Research on the Viscosity of Polymer Melts Filling through Micro Channels
Study on the Relation between Ink Tack Value and Wavers Velocity
Modeling for Ink Permeability and Calculating the Penetration Depth inside Paper
The Effects of Ink Viscosity on the Ink Permeability inside Newsprint and Offset Paper
The Influences of Printing Conditions and Paper Properties on Wet Picking/Repellence of Offset Paper
Study on Residual Strength of Pipe with Single Hemisphere Bottom Defect Using FEM Analysis
Study on Full-Field Stress Analysis for Composite Material Structure Using Lock-in Thermography
Comparative Experimental Analysis of Different Bending Methods for the Mechanical Characterization of Materials with Previous Loading History (Stress-Strain Curves)
Anti-Friction Mechanism of FeS Layer as Solid Lubrication Cmposite Coating Produced by Low-Temperature Ion Sulfurization
Effect of Modulation Frequency on Detecting Metal Materials with Microcracks Based on Ultrasound Infrared Lock-in Thermography
Research on Oil Monitoring of Heavy Vehicles Based on Information Entropy Theory
Design and Lubricating Property Research on Radial Supporting Bearing of Marine Main Thrust Bearing
Research on the Tack Value of Offset Printing Ink
The Influence of Humid Environment on Fatigue Property of Pre-Corroded 7XXX Aluminum Alloy
Influence of Milling Process on Internal Stress Measurement in Thick Plate
Abrasive Wear Property of Stellite190 Welding Coatings for Drill Tools
Research on Cutting-Tooth Outline Distortion of Internal Helical Gearing Machine Tool
Evaluation of Rheological Measurement of Polymer Blends Melts in Torque Rheometer
Creep Testing and Visco-Elastic Behaviour Reseach on Carbon Cathodes during Aluminum Electrolysis
Establish Sorptive Test System and Validation of the Reduction Indoor HCHO Concentrations by Building Material in Taiwan
Imaging Analysis of Image Plane Digital Holography
Kinematics Analysis and Numerical Method of Mcpherson Suspension
Study of Effect of Ce-Rich Mixed Rare Earth on Corrosivity of New 5XXX Series Aluminium Alloys
Thermal Engineering Theory and Applications
Preparation of Biodiesel from Tung Oil Catalyzed by Sulfonic-Functional Bronsted Acidic Ionic Liquids
Analysis of Used Lubricant Engine Oil: SAE20W50
Experimental Application of Salt Slurry in Talimu Unsaturated Brine-Based Drilling Fluid of Carboniferous System
The Numerical Simulation of Air-Cooled Plate-Fin Heat Exchanger
Research on the Physical Characteristics in Maize Deep-Bed Drying Process
Theoretical and Experimental Study on Nondestructive Pulse Phase Infrared Thermography Testing Technology
Investigation in the Effect of Gravity on the Droplet Removal in the Flow Channel of PEMFC
Power Consumption Saving of Chiller Water System for Semiconductor Factory in Taiwan
Research on Corn Drying Process under Temperature Gradient
Research on Algorithm of Geometric Constraint Solving in Declaring Family of Object Modeling
CAM/CAE
Study on Methods for Calculating Tool Position Error Distribution during 5-Axis Machining of Sculptured Surfaces
Five-Axis Flank Milling Method of Plane Double Enveloping Hourglass Worm
Free Modal Analysis and Experimental Verification of a Diesel Engine's Connecting Rod
The Effect of Fabric Weave Structure and Component Ratio on Pore Size Distribution
Research and Development of Woodworking Curved Jaw CAM
6-Axis Hybrid NC Belt-Grinding Machine for Heavy Blade
Effects of Tube Stiffness and Tubesheet Thickness on the Thermal Stress of the Tubes and Tubesheet
Geometric Modeling and Five-Axis NC Machining for Centrifugal Impeller
Wavelet-Based Multiresolution NURBS Curve Fairing
The Geometry and Topology Information Extraction of Workpiece and Manufacturing Feature Recognition Based on VC++
Research on Automatic Segmentation Methods of Multi-Beam Waterjet Cutting Process Drawings
Research on Parametric Modeling Technology of Marine Propeller
Thermal Stress Analysis of Water-Cooling Brake Disc Based on 3D Thermo-Mechanical Coupling Model
Development of Five-Axis Machine Tool Cutting Simulation System with Nonorthogonal Linear Axis
Buffer-Induced Design and Dynamic Response of Wheel Loader ROPS
Research about Numerical Control Machining of STL Files Based on Fagor CNC System
Dynamic Simulation of 2K-H Differential Gear Train with Time-Varying Meshing Stiffness
Analysis of Engineering Change Based on Product Development Network
The Automatic Process Design of Cutting Dosages of Mastercam
Resource Selection and Optimization in Manufacturing Grid Based on Genetic Algorithm
The Development and Research of Special Postprocessor for DMU125FD Machining Center
Development for Post-Processing System of 5-Axis CNC Machines
Analysis of Leaf Spring's Damping Characteristic Based on Nonlinear Finite Element
Key Technology of 5-Axis NC Programming and High-Speed Milling for Integral Impellers Based on the General Software UG
Contour Offset Approach to Generate Tool Path for Polyhedral Surfaces Machining
The System Design of Graphics Library of Fixture Element Based on .NET
Research on the Data Modeling of PDM Based on SmarTeam
Study on NC Machine Tool Select Incremental Value Programming and Select Absolute Value Programming of Machining Accuracy
Development of Direct Slicing Software of Three-Dimensional Model Based on Pro/E
Computer Methods in Design and Identification of Powder Metallurgy Materials
Superconvergence of the Space-Time Continuous Finite Elements with Interpolated Coefficients for Semilinear Parabolic Problems
Modeling and Simulation on Fluid Dynamic Depth-Setting TUV Based on FLUENT
Quality Control Mode of Injection Parts Molding Based on CAE Technology
High-Speed/Precision Machining and Inspection Technology
A Novel Measurement System to Evaluate the Six Geometric Errors of Rotary Table
Application of MECHATROLINK-II Fieldbus in Multi-Axis Embedded CNC System
Study on the Spindle Error Test and Analysis System of Numerical Control Machine Tools
Parameter Determination of Multiple Probes Scanning Method for Profile Measurement
Strength and Fatigue Analyses on Rotor in High Speed MU Traction Motor under Different Operating States
Study on Dynamic Accuracy of CNC in Aviation Part
The Effects of Curvature Radius on Cutting Force and Stability during End Milling
Wire Electrical Discharge Machining (Wire EDM) Cutting of Flexures for a Rotary Flexural Bearing Fabrication
Tool Path Optimization Based on the Constrain of Radial Cutting Depth in High Speed Milling
Study on Material Removal Mechanism of Silicon Nitride during ELID Ultraprecision Grinding
The Optimized Design of Strains Transducer Elastic Component with Double Cantilever Beam
Study on High-Precision Computer-Controlled Aspheric Surface Processing Techniques
Monitoring of Tool Wear in Rotary Ultrasonic Machining of Advanced Ceramics
Thermal Analysis and Optimization Design on Spindle Bearing of GSCK200A CNC Lathe
Mechanical Design of New Type Ceramic Polishing Machine
New Digital Differential Analyzer Linear Interpolation Program and Error Analysis
Study on Machining Deformation Errors in Spiral Finish Milling of Thin-Walled Blades
Study on Precision Machining Titanium Alloy Thin-Walled Parts
The Analysis of Effects of Curvature Attribute on Interference in Freeform Surface Blade NC Machining
Experimental Study on High-Speed Milling of Aluminum Alloy 2A70
Design and Analysis of a Miniaturization Nanoindentation and Scratch Device
Micro-Machining Technology
Using Micro-Pressing Method to Fabricate Bragg Grating on D-Shaped Optical Fiber
Study of Micro-Tool Wear Based on Finite Element Method
Development of Micro EDM with Directly Mounted APA 400MML Actuator as Tool Feed Mechanism
Research on the Forming Mechanism of Micro-Moulds Based on Laminated Slip-Welding of Ultrathin Stainless Steel Foils
Research of the Detection of Apple Sugar Conten Based on Machine Vision and near Infrared Spectroscopy
Force-Pose Nonlinear Mapping Algorithm for Assembling Micro-Mechanical System
Microfabrication of Sandwich Micro-Transformers
Development and Experimental Study of MWEDM Prototype
Experimental Research of Electrochemical Mechanical Polishing (ECMP) for Micro Tool Electrode
A Study on Surface Generation along Nominal Cutting Direction in Elliptical Vibration Cutting
Dimensionning and Simulation of a Pilot Plant for Solar Hydrogen Production
Laser Processing Technology
Study on Assembly Cost Based on Product Concurrent Design
Effect of Y2O3 Addition on the Microstructure and Corrosion Behaviour of Laser Cladding of Al Powder on ZM5 Magnesium Alloys
Microstructure and Fatigue Properties of Aero Aluminum Alloy Repaired by Laser Melt Casting
Analysis the Dynamic Strain of AM60 Magnesium Alloy by Means of a Single Laser Shock Processing
Surface Channel Hot-Carrier Effect on CLC n-TFTs
Single Femtosecond Laser Pulse Irradiation of Silicon on Different Crystallographic Facet Planes
Study of Effect on Tensile Stress Test from Distortion of Fibre Laser Welded Ti6Al4V Using FEA
Influence of Light Leakage from Q-Switched Laser on Laser-Induced Shock Wave
Effect of Laser Surface Modification and Tempering Process on Microstructure and Hardness Profiles of Roll Materials
Impact of Ni-2 Laser Cladding Coating on the Repeated Impact of the Dynamic Response
High Resolution ITO Lithography Using Excimer Laser for Flat-Panel Display Fabrication
Study on a New Way of Aligning the Focal Plane for the Laser projection Image System
Instability Effect on CLC nTFTs with Positive-Bias Temperature Stress
Probing Drain Current with Vertical and Horizontal Electrical Fields under Temperature Stress on CLC TFTs
Surface-Channel Drain-Avalanche Hot-Carrier Effect under Temperature Variation on CLC TFTs
Ablation Threshold of Sapphire by Pulsed Green Laser in Nanosecond Regime
Effect of Coaxial Powder Nozzle Design Parameters and the Gas Flow on the Powder Gathering Characteristics
Experimental Assessment of Roughness Changes in the Cutting Surface and Microhardness Changes of the Material S 355 J2 G3 after Being Cut by Non-Conventional Technologies
Mechanical Seal Face Texturing by the Acousto-Optic Q-Switched Pulsed Nd:YAG Laser
Research on Fatigue Fracture Defect of 23CrNi3Mo Drill Steel
Thermal Analysis of Laser Irradiation of Fused Silica
Numerical Simulation on Similarity of Thermal-Mechanical Effects of Thin-Walled Pressure Vessel Irradiated by Laser
Bionic Mechanisms and Bio-Manufacturing
Construction of a New Genetic Engineering Bacterium for Preparation of Superoxide Dismutase with High Productivity
Study on Method of Determination Plastic Work Conversion into Thermal Coefficient
Modal Analysis of Ball Screw Based on ANSYS Software
Algorithm Research of Pattern Recognition for Process Control of Electrospinning
Architectural Design of Bionic Structure and Biomimetic Materials
Study on Feature Extraction Method for Tooth Surface Based on Snake Model
Digital Manufacture and Management
Dynamical Adjustment of Cash Holdings in Operations Management
Quantitative Modeling of the Capacitated Multi-Level Production-Inventory Problem in Petroleum Industry
A Framework of Conflict Management System for the Virtual Manufacturing Environment
Optimal Policies for Crude Oil Purchasing
Study on the Balancing and Improving of Assembling Line for a Type of Scanner Shell
Knowledge-Integration Model for Networked Manufacturing
Community Structure in Service-Oriented Enterprises Collaboration Network
How to Realize the Heterogeneous Data Sharing through Grid Technology
Research on SOA-Based Decision-Making Support of VE Establishing
Research on the ITOC Based Solutions for Ship-Piping Jobshop Scheduling
Service Rate Optimization of Manufacturing Cell Based on Cost Models
Constructing a Transportation Service Platform through Integrating GPS and Optimized Dispatching Mechanism
Three Dimensional Point Clouds Watermarking Algorithm Based on Sphere Degenerated Octree
Research on Jobshop Scheduling Problem with Energy Consumption
An Improved Palmer-Based Heuristic for Two-Stage Flexible Flow Shop with Group Constraint
Reconstructing NC Program-Based Geometrical Error Compensation for Heavy-Duty NC Machine Tool
Nondestructive Testing of Wood-Plastics Structural Plates with Stiffener
Kinematic Analysis and Optimum Design of Double Wishbone Independent Suspension Based on Adams\View
Study on Technology of Suffocated Polystyrene Spheres with Bigger Particle Size
Design and Analysis on Greedy Algorithm Based on Distribution Center Location
Managing Change in Lean Manufacturing Implementation
An AHP Application for Solar Power Systems Selection
Modeling Analysis and Simulation Control Mechanism of Resource Ability Occupation
Optimal Co-Design of Control Algorithm and Bandwidth Scheduling for Networked Control Systems
A Rough Set Based Knowledge Discovery Model and its Application in Virtual Assembly
Research on the Weight Control Technique in the Manufacturing of Offshore Engineering Structure
Research and Development for Makeup Object Moderl Agent Layer about XML Standard of Profession Field
Research on Preventative Maintenance of Key Equipment in Discrete Manufacturing Enterprise MES
A Research on Remanufacturing Products Quality Control
Developing a Selection Model for the Solar Power System
Reinforcement Learning Based Job Shop Scheduling with Machine Choice
Research on Technology of Process-Oriented Virtual Assembly Modeling for Product Information
Optimal Transportation Solution to International Project Logistics Based on Decision Network Planning
Artificial Bee Colony Algorithm for Traveling Salesman Problem
Architecture of Remanufacturing Systematic Engineering
Power Line Carrier Detection System Based on Virtual Instrument
A New Optimized Cutting Method Based on Group Technology in the Structural Member Manufacturing
Conceptual Queries Based on Knowledge for E-Commerce
Research on Power Line Carrier Communication Quality Evaluation
Synthesis and Luminescent Properties of New Oligofluorene Derivatives Containing Various Comonomers
A Gravity-Like Mechanism for Car Sequencing Problem with Multistage Sequencing Buffer
Study on the Screening Efficiency for the Probability Screen
Progressive Damage and Failure Analysis of Fiber-Reinforced Laminated Composites Containing a Hole
Research on CAD Model Data Conversion for RP Technology
A Framework for Correlation Relationship Mining of Cloud Service in Cloud Manufacturing System
Research of Coal Mine Gas Monitoring System Based on Technology Fusion of Wireless Sensor Network and 3DGIS
Research on the Variable Leads Transmission Mechanism Meshing Surfaces
Study on Balance Points of Bucket Brigade Lines with Return Velocities
Workgroup-Based Manpower Planning for Multi-Type Staff Collaboration
Study on Nano-Scaled Precipitate in the Process of Cold-Rolled Production Based on CSP Technology
The Application of DELMIA in ARJ21 Aircraft Central Wing Assembly Simulation
Realization of DFM in Mold Design & Manufacturing
Application of Grey Relational Analysis Based on Distance Analysis in the Location of Automobile Distribution Center
Study on the Design of Layout of an Automobile Factory Based on SLP
Evolutionary Game on the Utility Decision of the Duopoly Retailers' Marketing Objectives
Practice of CSFs for the Pre-Development Process in New Product Innovation Processes at SMEs: Questionnaire Development
Study of Manufacturing Leadtime Calculation Based on Virtual Manufacturing Technology
The Application of 3D Design in the Design of Submarine Self-Propelled Model
Experimental Droplet Formation of Magnetostrictive Inkjet Head to the Change of Driving Waveform
Study on the Decrease of Harmful Substance in Paper-Process Reconstituted Tobacco Sheet
Research on Manufacturing Supply Chain Information Platform Architecture Based on Internet of Things
Shaking Moment Optimum Balancing of Planar Mechanisms
A Single Machine Scheduling Problem with Earliness and Tardiness Penalties Using Memetic Algorithm
Extracting the Rules of KPIs for Equipment Management Based on Rough Set Theory
The Internet of Things
A Review on Development and Trend of Intelligent Maintenance System
Decomposition of T2 Signal for Multivariate Assembly Process Control Using Bayesian Network
Real-Time Vibration Control of Steel Strip Immersed in Fluid for a Continuous Hot-Dip Galvanizing Line
Study of Force Measurement in Honing
Collar TEOS Integrity of Deep Trench DRAM Capacitor with a Vertical Parasitic NMOSFET
Study on Measurement of Polymer Orientation Degree Base on SVM
The Detection Method for Surface Quality of Parts Based on PCA and Wavelet Transform
Development of Analysis System for the Process of Piston's Production
Quality Management Process Continuous Improvement Based on Workflow Mining
Jet Performance Testing of High-Pressure Waterjet Descaling Nozzles
Innovative Design of Adjustable Gauge Block in Measurement of Planeness
Design and Development of Quality Information System for Electronic Ballast Based on Parameter Testing
Architecture of RFID Spatio-Temporal Data Management
Effect of Weld Metal Hardening Property on Deformation Behavior and Crack Driving Force of Mismatched Welded Joint
The Research of Production Process Statistical Steady-State Based on the Hypothesis Test
Research on Materials Tracking in Toy Production Based on the Internet of Things
Research on Quality Control of Clearance between Gears in Mesh Based on the Box-Cox Transformation
To Promote Entrepreneurial Education in Art Colleges with the Development of Creative Industries
Research on Real-Time Synthetic Error Compensation Principle for CNC Machine Tool
Parameter Optimization of the Sheet Metal Shearing Process in the Manufacturing of Leaf Spring Assembly Using the Grey Taguchi Method and Simulated Annealing Algorithm
Design and Implementation of Height Detection of the Cotton Top-Cutting
A Blending Control Aircraft Assembly Quality Method Using Key Assembly Characteristic
Probing Active-Area Shift with Improved Kelvin Measurement for Trench DRAM
A Study on t Chart for Short-Run and Mixed Model Productions
Support Vector Data Description Based Multivariate Cumulative Sum Control Chart
Design of Medical Wireless Sensor Network
The Study on RFID Middleware for Real-Time Monitoring in Manufacturing
Design of Stable Image Platform on Airborne Camera
Stress Analysis of the Working Device of Multi-Functional Excavator
Modified Double EWMA Approach for Mixed Product Run-to-Run CMP Process Control
Research on a New Technique of No Mark Overprint
A Method of Speech Segregation in Noisy Environment
An Improving Approach for 6 -Based Multi-Process Machining Environement
Other Related Topics
Processing Effect of Injection Molded Nanoparticle/Polymer Composites on their Resistivity
Modeling and Analysis of End of Life Vehicles Recovery: an Enhanced IDEF0 Methodology (Part I)
Modeling and Analysis of End of Life Vehicles Recovery: An Enhanced IDEF0 Methodology (Part II)
Development of Acoustic System of Hexahedral Sapphire Abrasive Shock Machining
Error Analysis and Control of Standard Mast Section Used in Mast-Climbing Work Platform
On the Edge-Balance Index Sets of the Net Graph Cn2xP2n(n=0(mod2))
Flow Stress Behavior of the Normalized and Tempered as-Cast 42CrMo Steel during Hot Deformation
Tribo-Electrochemical Performance of Copper ECMP in Mixed Phosphate Electrolyte
Interval Analysis Method of Fault Tree Based on Convex Model
by "Nielsen BookData"
