Advanced manufacturing technology : selected papers from the 2011 International Conference on Advanced Design and Manufacturing Engineering (ADME 2011) 16-18 September, 2011, Guangzhou, China

著者

• International Conference on Advanced Design and Manufacturing Engineering
• Gao, Jian

書誌事項

Advanced manufacturing technology : selected papers from the 2011 International Conference on Advanced Design and Manufacturing Engineering (ADME 2011) 16-18 September, 2011, Guangzhou, China

edited by Jian Gao

（Advanced materials research, v. 314-316）

Trans Tech Publications, c2011

• : [set]
• Part 1
• Part 2
• Part 3

注記

Includes bibliographical references and indexes

内容説明・目次

内容説明

This collection of peer-reviewed papers covers the subject areas of surface engineering/coatings, modeling, analysis and simulation of manufacturing processes, materials processing technology, mechanical behavior and fracture, computer-aided materials design, tooling testing and evaluation of materials, thermal engineering theory and applications, CAM/CAE, high-speed/precision machining and inspection technology, micro-machining technology, laser processing technology, bionic mechanisms and bio-manufacturing, digital manufacture and management, and other related topics. The work thus provides a thorough and up-to-date coverage of the topics. Volume is indexed by Thomson Reuters CPCI-S (WoS).

目次

Preface and Organizing Committee Surface Engineering/Coatings Experimental Study on Laser Surface Cladding of Ni60 Alloy on AZ31B Magnesium Alloy Transparent Glass Window with Energy-Saving and Heat Insulation Capabilities Development and Experiment of Surface Engineering Technology on Mulberry Silk Brocade Fabrics Cladding of Tantalum and Niobium on Titanium by Electron Beam, Injected in Atmosphere The Research on Cylindrical Ultrasonic Rolling Machining Used for Strengthening Metal Surface Microstructure and Properties of Carbonitride Alloying Self-Shielded Wear-Resistant Coatings by HVAS Investigation of Laser Parameters Influence of Direct-Part Marking Data Matrix Symbols on Aluminum Alloy Curvature Testing the Residual Stresses in 3%TiO2-Al2O3 Coatings by Thermal Spraying Technology Surface Properties of TiN Films on AZ 31 Magnesium Alloys Deposited by Magnetron Sputtering Technique The Effect of Particle Concentration and Magnetic Field on Tribological Behavior of Magneto-Rheological Fluid Application of Multi-Layer Composite Membrane in Tricone Bit Bearing Experimental Study on Hot Bending of 22MnB5 Steel Microstructure and Property of Cold Sprayed Copper Coating Tribological Properties of FeCrNi/CBN Composite Coating with Spraying High Velocity Arc Simulation of the Effect of Process Parameters on Particle Velocity in Cold Spray Using Laval Nozzle with Nine Holes Synthesis and Properties of Poly-Acrylate Emulsion Modified by Organ Silicone Application of Taquchi Method in the Optimization of PTA Hardfacing Process A New Processing Way for Helicoid Reflective Mirror Effect of Working Current on Microstructure and Properties of Cylinder Hardened by Plasma Beam at Junction of the Hardening Traces A Maya Geometry Slices Generation Method for Volumetric 3D Display Double Glow Plasma Hydrogen-Free Carburizing on the Surface of Purity Titanium Optical Sensitivity of Electrospun Fibers Containing Quinoxalines Derived with Metal Ion Chelating Agent Softening Kinetics in Nb-Microalloyed TRIP Steels with Increased Mn Content Simulation Study on Anti-Reflective Effects for Different Submicron-Structures The Dynamics Analysis Based on Matlab for the Electro-Hydraulic Servo Drive Device Effect of Abrasive and Surfactant on Chemical Mechanical Polishing of Hard Disk Substrates Study on Tribology Properties of Graphite/TiC/Ni-Base Alloy Composite Coating Friction and Wear Properties of Laser Cladding Coatings under Boundary Lubrication Conditions Compare of Wear Properties and Analysis of Wear Mechanism about TC4 Alloy and P110 Tubing Steel in Dry Condition Brush Plating Technology of LY11 Duralumin Alloy Preparation of Anti-Oxidation Coating on Billet Heating for Silicon Steel Preparation and Study of Cr-Nanodiamond Composite Co-Deposition Study on Electrospark Depositing & Welding Power Supply Effect of the Corona Discharge on ZnTe Film Influence of Powder Type and Substrate Hardness on the Deposition Behavior of WC-17Co Particle in Cold Spraying Properties of Electrodeposited Ni-SiC Composite Coatings on MB8 Wrought Magnesium Alloys Durability of Low Pressure Plasma Sprayed MoB/CoCr Coating on 310S Stainless Steel in Molten Al-12.07wt.%Si Alloy An Interfacial Damping Model for Hard Coating Structure Investigation of Laser Current Influence on Two-Dimensional Bar Code Contrast Surface Modification of Poly (M-Phenylene isophthalamide) Fibers and its Effect on the Mechanical Properties of Aramid Sheets Influence of Hollow Cathode Electron Beam on TiAlN Films Prepared by Multi-Arc Ion Plating Study on Iridium Coating Produced by Double Glow Plasma Improved Wear Resistance of Magnesium Alloy Irradiated by High-Intensity Pulsed Ion Beam at Lower Energy Density Understanding the Enhancement of Coating's Thermal Cracking Resistance by Multiple Segmentation Influence of Additive on High Temperature Performance of Glaze The Microstructure of Ni/ZrO2 Infiltrated Composite Layer Effects of Hypophosphate Concentrations on the Characteristics of Micro-Arc Oxidation Coatings Formed on Biomedical NiTi Alloy Effect of Laser Cladding Technologies on Microstructure and Properties of Ni-Based WC Alloy Coatings Effect of Atomic Oxygen Exposure on Si Implanted Siloxane Coatings in Low Earth Orbit Environment Microstructure and Wear Behavior of SiCP-Reinforced Magnesium Matrix Composite by Cold Spraying Influence of Ultrasonic on the Microstructure and Properties of Electroless Plating Ni-Co-P Coating at Low Temperature Investigation into Tribological Properties of TD-Treated D2 Steel for Applications in Dry Machining of Aluminum Alloy Studying on Rare Earth Aluminizing Process of GH4169 Superalloy A New Polyethylene Corrosion Protecting Coating with Ion Selectivity Formation Mechanism of Nanostructure of HVOF Sprayed Nanostructured WC-17Co Coating Improving the Performance of HVOF Sprayed WC-Co Coatings Using Statistical Design Synthesis and Characterization of Silicone-Modified Butyl Acrylate-Methyl Methacrylate Copolymer Latex Microstructure and Properties of In Situ Synthesized Composite Coating by Tungsten Inert Gas Cladding New Viscoelastic Magnetic Abrasive and its Surface Finishing Process Study on the Weldability of ZG30Cr06A Needling Material Modeling, Analysis and Simulation of Manufacturing Processes Experimental Study on Seepage Model of Rubber-Plastic Porous Tube Angular Distortion Analysis on Multipassed Welding of Combined Joint Types Using Thermo-Elastic-Plastic FEM Pre-Tensioning Fixture Development for Machining of Thin-Walled Components Investigation on Weld Induced Distortion of Butt and T-Joints Using Thermo-Elastic-FEM and Experimental Study Simulation Investigation the Effect of Heating-Lines on Tensile Mechanical Properties of Sheet Metal after Laser Scanning Research on Radio Frequency Wireless Communication Technology Adaptive Neuro-Fuzzy Inference System Modelling of Surface Roughness in High Speed Turning of AISI P 20 Tool Steel A 3D Coupled Thermo-Mechanical FE Model for Friction Stir Welding of 7075 Aluminum Alloy Plate 3D Finite Element Analysis of Marine Diesel Engine Connecting Rod Numerical Simulation on Low-Speed Magnetic Flux Leakage Inspection to Heat Exchanger Pipes A Novel Silicon-Based Packaging Platform for High-Efficiency LED Modules Numerical Simulation of Filling Process in Vertical Centrifugal Casting Based on Projection-Level Set Method Numerical Simulation of Macrosegregation Formation in Binary Alloy Solidification Processing Based on Modified Projection Method Output Feedback Assignability for Nonlinear Min-Max Systems Computer Simulation of Heat Treatment Process for Support Plate of Nuclear Reactor A Mathematical Model for the Generated Gear Tooth Surfaces of Spiral Bevel and Hypoid Gears Instantaneous Cutting Force Model in High-Speed Milling Process with Gyroscopic Effect Mathematical Model for Evaluating Roundness Errors by Maximum Inscribed Circle Method Major Process Quality Control for Light Seal of Piston Ring Based on KPCA and Elman Neural Network Experiment and Numerical Simulation of Extrudate Swell in the Polymer Extrusion Process Numerical Simulation of Microstructure Evolution of TC6 Alloy Blade during Finish Forging Experiment on Hot Rolling Deformation Resistance of Aluminum Alloy and Mathematical Modeling Quality Diagnosis and Error Compensation Based on Integrated SPC/EPC in MMPs Effect of Wall Conditions on PVC-R Co-Rotating Conical Twin-Screw Extrusion Finite Element Analysis of Effects of Preheating and Postweld Heat Treatment on Residual Stress in Pipe Welding A Quantitative Shape Control Strategy for Hot Tandem Mill Distributions and Influence Factors of Residual Stresses Induced by Oxygen Cutting Opening in Steel Structure Study on Metal Flowing Law for Isothermal Extrusion Deformation of AZ31 Magnesium Alloy Numerical Simulation of the Tunnel Blasting Process in Weak Intercalated Layer Structural Design and Simulation of a Piezoelectric Peristaltic Pump Driven by Circumferential Traveling-Wave Study on the Melting Time of Solid Pellets in Melt in a Co-Rotating Twin Screw Extruder Study on Production Mechanism of End Concavity in Cross Wedge Rolling Analysis and Research of Mathematical-Physical Models on Simulation of Electrochemical Machining Process Research on Cold Rolling of Gulley Ball Bearing Inner Ring Experiments and Simulation of Elastic-Plastic Deformation in Thin Wall Part Milling Analysis of the Granularity of Task Decomposition in Enterprise Alliance Based on System Dynamics Effect of Sample Materials on the AFM Tip-Based Dynamic Ploughing Process Study on Cutting Less-Teeth Gear with the Slotting Tool Application of Collision and Interference Inspection Algorithm Based on Bounding Box in NC Machining Simulation Influence of Initial Microstructure on Rheology of Al-Zn-Mg-Cu Alloy during Thermal Compression Design and Simulation Analysis of Aircraft Dynamic System Models and Implementation of Integrated Process Planning and Scheduling Influence of Processing Parameters of Warm Compaction on Green Density of Molybdenum Powder and Compact Defect Analysis Finite Element Analysis on Structural Stress of 16x16 InSb IRFPA with Viscoelastic Underfill Solutions for Deadlocked Problem of FMSs Using Theory of Regions Rolling Force in Hot Rolling of Large Rings Research on Processing Technology and Cutting Parameter of the Spiral Surface of Screw Rotor Prediction of Fracture Force of Weld Line Based on Artificial Neural Networks ANSYS-Based Finite Element Analysis on Automotive Panel Drawing Die Research and Structure Realization of a New Cleaning Machine for Aluminum Package Simulation Research on the Impact Mole System in Working State Buckling Analysis and Experiment of Fiber-Paper Honeycomb Sandwich Structure Composites A Study on Storing Process of Thermoforming Using Finite Difference Method Optimal Heater Control in Thermoforming Preheating Using Approximate Function Experimental Study on Material Removal Rate for Engineering Ceramics Machining with Micro-Detonation of Striking Arc Effect of Material Parameters Wave on Sheet Metal Springback Using Orthogonal Design Simulation Influence Regularities of Axial Force of Cross Wedge Rolling Symmetric Shaft-Parts about Technical Parameters Research on the Blank Design Method of Closed Rolling the High-Neck Flange Design and Application of High-Speed Variable Pitch End Mill Based on Milling Stability Estimation of Friction Coefficient Related to Squeal in Cutting Study on Mechanical Mechanism of ARB Process Based on Randomness Numerical Simulation of Solidification by SPH in Sand Cast Process DOE-Based Numerical Investigation on Factors Affecting Temperature Field during Line Heating Simulation of Temperature Field during the Laser Sintering Process of Nano-Hydroxyapatite Powder An Optimum-Curved Die-Profile for Investment Casting of Turbo Blades Numerical Analysis of the Workpiece Velocity in Electromagnetic Forming Process The Research of Shock Wave Attenuation Test of UHMWPE-PUF Composite by PVDF Piezoelectric Sensor Investigation of Die Wear during Fine-Blanking Process of a Kind of Automobile Synchronizer Slipper by FEM and Experiments Finite Element Analysis of Vehicle Engine Connection Rod under Mechanical Load Optimal Design of Triangle Fastening Screw Thread's Turn Number Numerical Simulation of Temperature Field and Experimental Verification during Micro-Detonation of Arc Strike Machining A New Single Step Full Discrete Scheme for a Semilinear Second Order Hyperbolic Equation Materials Processing Technology Finite Element Analysis of High - Pressure Grinding Mill Theoretical Analysis of Blood Alcohol Detection Based on Raman Spectroscopy Effect of Condenser Temperature and Speed on one A/C System Foundry Technology of the Pressure Board Steel Casting Based on Proportional Solidification Theory Research on the Shrinkage Cavity Defect of the Extruded Boss in Fine Blanking Process Indirect Hot Stamping of Boron Steel 22MnB5 for an Upper B-Pillar Research on the Mechanism of Interface Strengthening for Ti3Al/TC11 Dual Alloy Viscous Behaviours of Feedstocks for Micro MIM The Innovation and Application of the Piercing Process inside of Parts Stainless Steel Lining High Pressure Reactors Were Tested and Manufactured by Hydraulic Pressure Expanding Method Velocity and Current Density Evaluation of Combined Plasma Arc for High Temperature Materials Processing by Computational Simulation Study on the Formability and its Geometric Factors of Seamed Tube Hydroforming Experimental Study on Sintering Parameters in Selective Laser Sintering for ABS Physical Properties of Primary Slurry for Titanium Investment Casting Research Status of Warm Stamping Forming Technology at Domestic and International Surface Effect Mechanism Analysis for Vibrational Rotary Forging The Influence of Process Parameters on the Branch Height for Air Handling Unit Preliminary Study on Prediction Model of Forming Tubular Bulge Height for a Thick-Plate FVM Simulation of the Effect of Preventing Ring Structure on Continuous Extrusion Process Comparative Study of Creep and Stress Relaxation Behavior for 7055 Aluminum Alloy Effects of Extrusion Process on Microstructure of Aluminum Profiles with Different Wall Thickness Sections Study on Spinning of Pentagonal Cross-Section Hollow-Part Based on Orthogonal Experiment Design Effect of the Process Parameter on as-Cast 30Cr2Ni4MoV Steel Soundness during Cogging Experimental Research on Connection of Pipe and Rod by Electromagnetic Impulse Analysis of the Simulation Movement in Cigarette Packaging Machine Pusher Device Study on Microstructure Evolution of TA1 during Plane Compression and its Similarity to Power Spinning Kinematics Analysis and Numerical Method for Multi-Link Suspension Auto-Body Panel Springback Analysis Using Yoshida-Uemori Model Constitutive Model of Supper-Alloy IN625 Based on Extrusion Test Extraction of Niobium from the Bayan Obo Tailings by "Flotation-Microwave Magnetic Roasting-Magnetic Separation" Mechanism and Experimental Investigation on Silicon Wafer Hybrid Polishing by Ultrasonic-Elliptic-Vibration Chemical-Mechanical Exploration on Shape of Profiles Determined by Chord Angle Control Method Quick Plastic Forming Behavior of AZ91 Magnesium Alloy Sheet Mechanical Behavior & Fracture The Durability Life Prediction of Recycled Concrete under Chlorate Environment The Evaluation of Machinability of Inconel-718 and AISI4340 Hardening Behaviours Prediction of TRIP Steels with Pre-Strain Development of a Novel Deployment Hinge Mechanism for a Spacecraft Using Axiomatic Design Dislocation Distribution Function of the Mode III Dynamic Crack Subjected to Moving Unit Step Load from a Point Mechanical Properties Analysis of Combined Structure of Suspension Platform of Suspended Access Equipment Simultaneous Application of Coda Waves Interferometry (CWI) and Nonlinear Resonance (NR) to Detect Damage in Polymer Concrete An Orthogonal Experimental Analysis of Electrical Discharge Machining of Particle Reinforced Metal Matrix Composites with Concavo-Convex Electrode Refined Numerical Simulation and Experimental Investigation on Arc Welded Joints of 6061 Aluminum Alloy Turning Process Modeling and Cutting Force Investigation Based on Finite Element Analysis and Cutting Experiments Study on the Relationships between Edge Distance and the Failure Process of Edge Chipping for Engineering Ceramics Study on Cutting Force and Cutting Temperature of Coated Carbide Turning Inserts with 3D Chip-Breaker Changes in Elastic and Viscoelastic Properties of Poly(Methyl methacrylate) by Physical Aging Corrosion Behavior of Twin-Wire Metal Inert Gas Arc Welds in 7A52 Al Alloy Plate Mechanism and Experimental Research on Copper and Copper Alloy's Manual SHS Welding Technology Study on Microstructure and Properties of 5A06 Aluminum Alloy Welded Joint by Deep Cryogenic Treatment Seam Tracking Monitoring Based on Keyhole Features during High-Power Fiber Laser Welding Spatter Feature Recognition during High-Power Disk Laser Welding Elucidation of Welding Stability Based on Keyhole Configuration during High-Power Fiber Laser Welding High Cycle Fatigue Behavior of MB8 Magnesium Alloy Analysis of Characteristics of Mg Alloy Welded Joint by Laser Welding Study on Procedure of Bonding-FSSW Hybrid Joints of AZ31 Magnesium Alloy Diffusion Bonding of 3Y-TZP and SUS440 by Using of Ti-Cu Powder/Sheet Progressive Failure Study of Discrete-Source Damage in Stiffened Composite Panels Interface Structure of Be/HR-1Stainless Steel by Vacuum Diffusion Bonding Experimental and Numerical Studies of the Stress Concentration Factor for Tubular KK-Joints under Axial Loads Effect of Process Parameters on Welding Variables during Linear Friction Welding of Ti-6Al-4V Alloy Analysis of the Swelling Effect in Single-Point Diamond Turning The Study of High Strength Bolt Preload with Hydraulic Tensioner Installation Study on Screw Drill Wear when Drilling a New Stainless Steel X02Cr18Ni10MoTiN and Accompanying Phenomena in the Cutting Zone Sheet Metal Forming Limit Prediction with Maximum Thickness Reduction Ratio Kalman Filtering for Seam Tracking in Master-Slave Robot Remote Welding System Experimental Study of Plastic Flow during Linear Friction Welding by Physical Simulation Method Research of High Efficiency Combined Wire Electrochemical Machining Technology and its Application Techanics Experiment Study on PcBN Cutting Tool Dry Turning Austenitic Stainless Steel AISI 301 Experimental Study on GMAW with Strip Electrode An Adaptive Memetic Algorithm for Packing Problems of Irregular Shapes Numerical Simulation of Residual Stresses in Single Pass Butt-Weld of Dissimilar Pipe Joint during the Fusion Welding Process Effects of Different Solder Alloys on Reliability of 3D PLUS Solder Joint Virtual Prototype Modeling and Dynamics Analysis of a Large-Scale Wind Turbine's Gearbox High Speed CO2 Arc Welding Based on Constant Power Control Analysis of Stress Concentration for Curvilinear Holes by Complex Variable Function Method Investigation of Machining OCr18Ni9 Stainless Steel under Spraying Liquid Nitrogen Calculation Method of the Cracking Resistance of Simply Supported Reactive Powder Concrete Plate The Simulation Analysis of Friction Effect on Cutting Process Numerical Simulation of Dispersed Phase Flow in a Tube Considering Bubbles Erosion and Cl- Ions Concentration Effects Characteristics of Thermo-Electromotive Force, Electric Current and Electric Resistance in Intermittent Cutting Process by Face Milling Study on Tensile Magnetic Memory Characteristics of Demagnetization 16Mn and Q235 Steel Friction and Wear Behavior of SiCP/Cu Composite Prepared by Powder Injection Molding Stress Corrosion Cracking of SPV50Q Steel in H2S-Containing Sour Environment Three-Dimensional Pattern Design of Processing Draft Research on the Failure Mechanism of Flash Welded Rail Experimental Research on Ultrasonic Vibration Deep Hole Honing of Titanium Alloy Preparation of Water-Based No-Clean Flux for High Temperature Lead-Free Solder Design and Research on the Refitment of Deep-Hole Machine Tool Anisotropy of Deformation Behavior of AZ31 Magnesium Alloy Sheets Fault Feature Extraction Based on Improved EEMD and Hilbert Transform Study on Material Removal in Electrorheological Fluid-Assisted Polishing Analysis of Forming Mechanism of Thermal Damages on Friction Surfaces of Brake Disc Study on Wear Properties and Mechanisms of Coated Carbide Tools in Dry Turning of 300M Steel Numerical Analysis of Stress Field for Simulating Pressure Vessel Nozzles Experimental Research on Compound and Efficient Powerful Milling Process of Blisk Constitutive Equation for V-5Cr-5Ti at High Temperatures Measured Using the SHPB Technique Influence of Phase Content on Hot Deformation Behavior of Ni-Based Superalloy IN718 Effect of Welding Thermal Cycle on the Microstructure and Mechanical Properties in Multi-Pass Submerged-Arc Welding Experimental Study on Ball End Mill in Glass Machining at High Speed Simulation of the High-Speed Milling Temperature of Titanium Alloy Ti - 6Al - 4V Analysis and Experimental Research on Chemical Mechanical Polishing Flow Field Microstructure and Mechanical Property of GH4169 Joints by Vacuum Diffusion Bonding Microstructure and Mechanical Property of the ZrB2-Based Ultra-High-Temperature Ceramic Composites Brazed Joint New Chip Flow Angle Prediction to Investigate the Effects of Ratio of the Cutting Edge Lengths on Chip Flow Using Sharp Corner Tools Study on Three-Point Bending Mechanical Performance of Thin-Walled Super Alloy Honeycomb Sandwich with Penetrable Defects Piecing Failure Analysis of Drill Pipe Upset Influence of Slagging Elements on Manual SHS Welding of Low-Carbon Steel Based on ANSYS Planetary Gear Ransmission Design Analysis A New Research of Laser Welding Coaxial Protection Nozzle Material Design of Computer Aided Approximation of Coupling Mode and Fitting Alignment in Planar Light Waveguide Packaging Application of Genetic Algorithm on the Layout of Rectangular Temperature Numerical Simulation of Laser Penetration Welding Based on Calculated Keyhole Profile Vector Calculation for Tool Envelope Surface in Five-Axis NC Machining The Improvement of the Interlock Arm on Ejection Seat Based on the ANSYS The Finite Element Simulation and Analysis of Polymer Tube Coextrusion Process Synthesis Error Analysis of NC Manufacturing and Error Prediction Modelling Based on BP Neural Network Technology The Application of FEA in High-Speed Cutting Tool Thermodynamic Modeling of the Mg-Ni-La-Cu System Constitutive Equations for Graphene Based on Anisotropic Theory Observation of Polypropylene (PP) Melt Flow on Macro and Micro Cavities during Filling Phase of Injection Molding Ant Colony Algorithm: an Application of Design Self-Balancing Torsion Bar Warpage and Structural Analysis of Automotive Trim Based on FFD and CAE in Plastic Injection Molding The Design and Implementation of a CAD/CAE Integrated System for Plastic Injection Molding Theoretical Research of Aspheric Testing by Using the Digital Moire Patterns Base on the Sub-Region Splicing Method The Parameters Optimization of Rheology Stress Model for Aluminum Based on GA Multi-Parameter Design and Simulation of Composite Microstructure Tooling/Testing and Evaluation of Materials Solving the Two-Objective Shop Scheduling Problem in MTO Manufacturing Systems by a Novel Genetic Algorithm A Performance Evaluation of Printing RFID Tags An Estimation of Resonant Frequency of a Curving RFID Tag Micro-Scale Abrasive Wear of Soft Materials Study on the Corrosion Behavior of Two Kinds of Tubing at Different Temperatures Study on the Relationship between Plastic Viscosity and Tack Value of Picking Liquid Experimental Research on the Viscosity of Polymer Melts Filling through Micro Channels Study on the Relation between Ink Tack Value and Wavers Velocity Modeling for Ink Permeability and Calculating the Penetration Depth inside Paper The Effects of Ink Viscosity on the Ink Permeability inside Newsprint and Offset Paper The Influences of Printing Conditions and Paper Properties on Wet Picking/Repellence of Offset Paper Study on Residual Strength of Pipe with Single Hemisphere Bottom Defect Using FEM Analysis Study on Full-Field Stress Analysis for Composite Material Structure Using Lock-in Thermography Comparative Experimental Analysis of Different Bending Methods for the Mechanical Characterization of Materials with Previous Loading History (Stress-Strain Curves) Anti-Friction Mechanism of FeS Layer as Solid Lubrication Cmposite Coating Produced by Low-Temperature Ion Sulfurization Effect of Modulation Frequency on Detecting Metal Materials with Microcracks Based on Ultrasound Infrared Lock-in Thermography Research on Oil Monitoring of Heavy Vehicles Based on Information Entropy Theory Design and Lubricating Property Research on Radial Supporting Bearing of Marine Main Thrust Bearing Research on the Tack Value of Offset Printing Ink The Influence of Humid Environment on Fatigue Property of Pre-Corroded 7XXX Aluminum Alloy Influence of Milling Process on Internal Stress Measurement in Thick Plate Abrasive Wear Property of Stellite190 Welding Coatings for Drill Tools Research on Cutting-Tooth Outline Distortion of Internal Helical Gearing Machine Tool Evaluation of Rheological Measurement of Polymer Blends Melts in Torque Rheometer Creep Testing and Visco-Elastic Behaviour Reseach on Carbon Cathodes during Aluminum Electrolysis Establish Sorptive Test System and Validation of the Reduction Indoor HCHO Concentrations by Building Material in Taiwan Imaging Analysis of Image Plane Digital Holography Kinematics Analysis and Numerical Method of Mcpherson Suspension Study of Effect of Ce-Rich Mixed Rare Earth on Corrosivity of New 5XXX Series Aluminium Alloys Thermal Engineering Theory and Applications Preparation of Biodiesel from Tung Oil Catalyzed by Sulfonic-Functional Bronsted Acidic Ionic Liquids Analysis of Used Lubricant Engine Oil: SAE20W50 Experimental Application of Salt Slurry in Talimu Unsaturated Brine-Based Drilling Fluid of Carboniferous System The Numerical Simulation of Air-Cooled Plate-Fin Heat Exchanger Research on the Physical Characteristics in Maize Deep-Bed Drying Process Theoretical and Experimental Study on Nondestructive Pulse Phase Infrared Thermography Testing Technology Investigation in the Effect of Gravity on the Droplet Removal in the Flow Channel of PEMFC Power Consumption Saving of Chiller Water System for Semiconductor Factory in Taiwan Research on Corn Drying Process under Temperature Gradient Research on Algorithm of Geometric Constraint Solving in Declaring Family of Object Modeling CAM/CAE Study on Methods for Calculating Tool Position Error Distribution during 5-Axis Machining of Sculptured Surfaces Five-Axis Flank Milling Method of Plane Double Enveloping Hourglass Worm Free Modal Analysis and Experimental Verification of a Diesel Engine's Connecting Rod The Effect of Fabric Weave Structure and Component Ratio on Pore Size Distribution Research and Development of Woodworking Curved Jaw CAM 6-Axis Hybrid NC Belt-Grinding Machine for Heavy Blade Effects of Tube Stiffness and Tubesheet Thickness on the Thermal Stress of the Tubes and Tubesheet Geometric Modeling and Five-Axis NC Machining for Centrifugal Impeller Wavelet-Based Multiresolution NURBS Curve Fairing The Geometry and Topology Information Extraction of Workpiece and Manufacturing Feature Recognition Based on VC++ Research on Automatic Segmentation Methods of Multi-Beam Waterjet Cutting Process Drawings Research on Parametric Modeling Technology of Marine Propeller Thermal Stress Analysis of Water-Cooling Brake Disc Based on 3D Thermo-Mechanical Coupling Model Development of Five-Axis Machine Tool Cutting Simulation System with Nonorthogonal Linear Axis Buffer-Induced Design and Dynamic Response of Wheel Loader ROPS Research about Numerical Control Machining of STL Files Based on Fagor CNC System Dynamic Simulation of 2K-H Differential Gear Train with Time-Varying Meshing Stiffness Analysis of Engineering Change Based on Product Development Network The Automatic Process Design of Cutting Dosages of Mastercam Resource Selection and Optimization in Manufacturing Grid Based on Genetic Algorithm The Development and Research of Special Postprocessor for DMU125FD Machining Center Development for Post-Processing System of 5-Axis CNC Machines Analysis of Leaf Spring's Damping Characteristic Based on Nonlinear Finite Element Key Technology of 5-Axis NC Programming and High-Speed Milling for Integral Impellers Based on the General Software UG Contour Offset Approach to Generate Tool Path for Polyhedral Surfaces Machining The System Design of Graphics Library of Fixture Element Based on .NET Research on the Data Modeling of PDM Based on SmarTeam Study on NC Machine Tool Select Incremental Value Programming and Select Absolute Value Programming of Machining Accuracy Development of Direct Slicing Software of Three-Dimensional Model Based on Pro/E Computer Methods in Design and Identification of Powder Metallurgy Materials Superconvergence of the Space-Time Continuous Finite Elements with Interpolated Coefficients for Semilinear Parabolic Problems Modeling and Simulation on Fluid Dynamic Depth-Setting TUV Based on FLUENT Quality Control Mode of Injection Parts Molding Based on CAE Technology High-Speed/Precision Machining and Inspection Technology A Novel Measurement System to Evaluate the Six Geometric Errors of Rotary Table Application of MECHATROLINK-II Fieldbus in Multi-Axis Embedded CNC System Study on the Spindle Error Test and Analysis System of Numerical Control Machine Tools Parameter Determination of Multiple Probes Scanning Method for Profile Measurement Strength and Fatigue Analyses on Rotor in High Speed MU Traction Motor under Different Operating States Study on Dynamic Accuracy of CNC in Aviation Part The Effects of Curvature Radius on Cutting Force and Stability during End Milling Wire Electrical Discharge Machining (Wire EDM) Cutting of Flexures for a Rotary Flexural Bearing Fabrication Tool Path Optimization Based on the Constrain of Radial Cutting Depth in High Speed Milling Study on Material Removal Mechanism of Silicon Nitride during ELID Ultraprecision Grinding The Optimized Design of Strains Transducer Elastic Component with Double Cantilever Beam Study on High-Precision Computer-Controlled Aspheric Surface Processing Techniques Monitoring of Tool Wear in Rotary Ultrasonic Machining of Advanced Ceramics Thermal Analysis and Optimization Design on Spindle Bearing of GSCK200A CNC Lathe Mechanical Design of New Type Ceramic Polishing Machine New Digital Differential Analyzer Linear Interpolation Program and Error Analysis Study on Machining Deformation Errors in Spiral Finish Milling of Thin-Walled Blades Study on Precision Machining Titanium Alloy Thin-Walled Parts The Analysis of Effects of Curvature Attribute on Interference in Freeform Surface Blade NC Machining Experimental Study on High-Speed Milling of Aluminum Alloy 2A70 Design and Analysis of a Miniaturization Nanoindentation and Scratch Device Micro-Machining Technology Using Micro-Pressing Method to Fabricate Bragg Grating on D-Shaped Optical Fiber Study of Micro-Tool Wear Based on Finite Element Method Development of Micro EDM with Directly Mounted APA 400MML Actuator as Tool Feed Mechanism Research on the Forming Mechanism of Micro-Moulds Based on Laminated Slip-Welding of Ultrathin Stainless Steel Foils Research of the Detection of Apple Sugar Conten Based on Machine Vision and near Infrared Spectroscopy Force-Pose Nonlinear Mapping Algorithm for Assembling Micro-Mechanical System Microfabrication of Sandwich Micro-Transformers Development and Experimental Study of MWEDM Prototype Experimental Research of Electrochemical Mechanical Polishing (ECMP) for Micro Tool Electrode A Study on Surface Generation along Nominal Cutting Direction in Elliptical Vibration Cutting Dimensionning and Simulation of a Pilot Plant for Solar Hydrogen Production Laser Processing Technology Study on Assembly Cost Based on Product Concurrent Design Effect of Y2O3 Addition on the Microstructure and Corrosion Behaviour of Laser Cladding of Al Powder on ZM5 Magnesium Alloys Microstructure and Fatigue Properties of Aero Aluminum Alloy Repaired by Laser Melt Casting Analysis the Dynamic Strain of AM60 Magnesium Alloy by Means of a Single Laser Shock Processing Surface Channel Hot-Carrier Effect on CLC n-TFTs Single Femtosecond Laser Pulse Irradiation of Silicon on Different Crystallographic Facet Planes Study of Effect on Tensile Stress Test from Distortion of Fibre Laser Welded Ti6Al4V Using FEA Influence of Light Leakage from Q-Switched Laser on Laser-Induced Shock Wave Effect of Laser Surface Modification and Tempering Process on Microstructure and Hardness Profiles of Roll Materials Impact of Ni-2 Laser Cladding Coating on the Repeated Impact of the Dynamic Response High Resolution ITO Lithography Using Excimer Laser for Flat-Panel Display Fabrication Study on a New Way of Aligning the Focal Plane for the Laser projection Image System Instability Effect on CLC nTFTs with Positive-Bias Temperature Stress Probing Drain Current with Vertical and Horizontal Electrical Fields under Temperature Stress on CLC TFTs Surface-Channel Drain-Avalanche Hot-Carrier Effect under Temperature Variation on CLC TFTs Ablation Threshold of Sapphire by Pulsed Green Laser in Nanosecond Regime Effect of Coaxial Powder Nozzle Design Parameters and the Gas Flow on the Powder Gathering Characteristics Experimental Assessment of Roughness Changes in the Cutting Surface and Microhardness Changes of the Material S 355 J2 G3 after Being Cut by Non-Conventional Technologies Mechanical Seal Face Texturing by the Acousto-Optic Q-Switched Pulsed Nd:YAG Laser Research on Fatigue Fracture Defect of 23CrNi3Mo Drill Steel Thermal Analysis of Laser Irradiation of Fused Silica Numerical Simulation on Similarity of Thermal-Mechanical Effects of Thin-Walled Pressure Vessel Irradiated by Laser Bionic Mechanisms and Bio-Manufacturing Construction of a New Genetic Engineering Bacterium for Preparation of Superoxide Dismutase with High Productivity Study on Method of Determination Plastic Work Conversion into Thermal Coefficient Modal Analysis of Ball Screw Based on ANSYS Software Algorithm Research of Pattern Recognition for Process Control of Electrospinning Architectural Design of Bionic Structure and Biomimetic Materials Study on Feature Extraction Method for Tooth Surface Based on Snake Model Digital Manufacture and Management Dynamical Adjustment of Cash Holdings in Operations Management Quantitative Modeling of the Capacitated Multi-Level Production-Inventory Problem in Petroleum Industry A Framework of Conflict Management System for the Virtual Manufacturing Environment Optimal Policies for Crude Oil Purchasing Study on the Balancing and Improving of Assembling Line for a Type of Scanner Shell Knowledge-Integration Model for Networked Manufacturing Community Structure in Service-Oriented Enterprises Collaboration Network How to Realize the Heterogeneous Data Sharing through Grid Technology Research on SOA-Based Decision-Making Support of VE Establishing Research on the ITOC Based Solutions for Ship-Piping Jobshop Scheduling Service Rate Optimization of Manufacturing Cell Based on Cost Models Constructing a Transportation Service Platform through Integrating GPS and Optimized Dispatching Mechanism Three Dimensional Point Clouds Watermarking Algorithm Based on Sphere Degenerated Octree Research on Jobshop Scheduling Problem with Energy Consumption An Improved Palmer-Based Heuristic for Two-Stage Flexible Flow Shop with Group Constraint Reconstructing NC Program-Based Geometrical Error Compensation for Heavy-Duty NC Machine Tool Nondestructive Testing of Wood-Plastics Structural Plates with Stiffener Kinematic Analysis and Optimum Design of Double Wishbone Independent Suspension Based on Adams\View Study on Technology of Suffocated Polystyrene Spheres with Bigger Particle Size Design and Analysis on Greedy Algorithm Based on Distribution Center Location Managing Change in Lean Manufacturing Implementation An AHP Application for Solar Power Systems Selection Modeling Analysis and Simulation Control Mechanism of Resource Ability Occupation Optimal Co-Design of Control Algorithm and Bandwidth Scheduling for Networked Control Systems A Rough Set Based Knowledge Discovery Model and its Application in Virtual Assembly Research on the Weight Control Technique in the Manufacturing of Offshore Engineering Structure Research and Development for Makeup Object Moderl Agent Layer about XML Standard of Profession Field Research on Preventative Maintenance of Key Equipment in Discrete Manufacturing Enterprise MES A Research on Remanufacturing Products Quality Control Developing a Selection Model for the Solar Power System Reinforcement Learning Based Job Shop Scheduling with Machine Choice Research on Technology of Process-Oriented Virtual Assembly Modeling for Product Information Optimal Transportation Solution to International Project Logistics Based on Decision Network Planning Artificial Bee Colony Algorithm for Traveling Salesman Problem Architecture of Remanufacturing Systematic Engineering Power Line Carrier Detection System Based on Virtual Instrument A New Optimized Cutting Method Based on Group Technology in the Structural Member Manufacturing Conceptual Queries Based on Knowledge for E-Commerce Research on Power Line Carrier Communication Quality Evaluation Synthesis and Luminescent Properties of New Oligofluorene Derivatives Containing Various Comonomers A Gravity-Like Mechanism for Car Sequencing Problem with Multistage Sequencing Buffer Study on the Screening Efficiency for the Probability Screen Progressive Damage and Failure Analysis of Fiber-Reinforced Laminated Composites Containing a Hole Research on CAD Model Data Conversion for RP Technology A Framework for Correlation Relationship Mining of Cloud Service in Cloud Manufacturing System Research of Coal Mine Gas Monitoring System Based on Technology Fusion of Wireless Sensor Network and 3DGIS Research on the Variable Leads Transmission Mechanism Meshing Surfaces Study on Balance Points of Bucket Brigade Lines with Return Velocities Workgroup-Based Manpower Planning for Multi-Type Staff Collaboration Study on Nano-Scaled Precipitate in the Process of Cold-Rolled Production Based on CSP Technology The Application of DELMIA in ARJ21 Aircraft Central Wing Assembly Simulation Realization of DFM in Mold Design & Manufacturing Application of Grey Relational Analysis Based on Distance Analysis in the Location of Automobile Distribution Center Study on the Design of Layout of an Automobile Factory Based on SLP Evolutionary Game on the Utility Decision of the Duopoly Retailers' Marketing Objectives Practice of CSFs for the Pre-Development Process in New Product Innovation Processes at SMEs: Questionnaire Development Study of Manufacturing Leadtime Calculation Based on Virtual Manufacturing Technology The Application of 3D Design in the Design of Submarine Self-Propelled Model Experimental Droplet Formation of Magnetostrictive Inkjet Head to the Change of Driving Waveform Study on the Decrease of Harmful Substance in Paper-Process Reconstituted Tobacco Sheet Research on Manufacturing Supply Chain Information Platform Architecture Based on Internet of Things Shaking Moment Optimum Balancing of Planar Mechanisms A Single Machine Scheduling Problem with Earliness and Tardiness Penalties Using Memetic Algorithm Extracting the Rules of KPIs for Equipment Management Based on Rough Set Theory The Internet of Things A Review on Development and Trend of Intelligent Maintenance System Decomposition of T2 Signal for Multivariate Assembly Process Control Using Bayesian Network Real-Time Vibration Control of Steel Strip Immersed in Fluid for a Continuous Hot-Dip Galvanizing Line Study of Force Measurement in Honing Collar TEOS Integrity of Deep Trench DRAM Capacitor with a Vertical Parasitic NMOSFET Study on Measurement of Polymer Orientation Degree Base on SVM The Detection Method for Surface Quality of Parts Based on PCA and Wavelet Transform Development of Analysis System for the Process of Piston's Production Quality Management Process Continuous Improvement Based on Workflow Mining Jet Performance Testing of High-Pressure Waterjet Descaling Nozzles Innovative Design of Adjustable Gauge Block in Measurement of Planeness Design and Development of Quality Information System for Electronic Ballast Based on Parameter Testing Architecture of RFID Spatio-Temporal Data Management Effect of Weld Metal Hardening Property on Deformation Behavior and Crack Driving Force of Mismatched Welded Joint The Research of Production Process Statistical Steady-State Based on the Hypothesis Test Research on Materials Tracking in Toy Production Based on the Internet of Things Research on Quality Control of Clearance between Gears in Mesh Based on the Box-Cox Transformation To Promote Entrepreneurial Education in Art Colleges with the Development of Creative Industries Research on Real-Time Synthetic Error Compensation Principle for CNC Machine Tool Parameter Optimization of the Sheet Metal Shearing Process in the Manufacturing of Leaf Spring Assembly Using the Grey Taguchi Method and Simulated Annealing Algorithm Design and Implementation of Height Detection of the Cotton Top-Cutting A Blending Control Aircraft Assembly Quality Method Using Key Assembly Characteristic Probing Active-Area Shift with Improved Kelvin Measurement for Trench DRAM A Study on t Chart for Short-Run and Mixed Model Productions Support Vector Data Description Based Multivariate Cumulative Sum Control Chart Design of Medical Wireless Sensor Network The Study on RFID Middleware for Real-Time Monitoring in Manufacturing Design of Stable Image Platform on Airborne Camera Stress Analysis of the Working Device of Multi-Functional Excavator Modified Double EWMA Approach for Mixed Product Run-to-Run CMP Process Control Research on a New Technique of No Mark Overprint A Method of Speech Segregation in Noisy Environment An Improving Approach for 6 -Based Multi-Process Machining Environement Other Related Topics Processing Effect of Injection Molded Nanoparticle/Polymer Composites on their Resistivity Modeling and Analysis of End of Life Vehicles Recovery: an Enhanced IDEF0 Methodology (Part I) Modeling and Analysis of End of Life Vehicles Recovery: An Enhanced IDEF0 Methodology (Part II) Development of Acoustic System of Hexahedral Sapphire Abrasive Shock Machining Error Analysis and Control of Standard Mast Section Used in Mast-Climbing Work Platform On the Edge-Balance Index Sets of the Net Graph Cn2xP2n(n=0(mod2)) Flow Stress Behavior of the Normalized and Tempered as-Cast 42CrMo Steel during Hot Deformation Tribo-Electrochemical Performance of Copper ECMP in Mixed Phosphate Electrolyte Interval Analysis Method of Fault Tree Based on Convex Model

「Nielsen BookData」 より

詳細情報

• NII書誌ID(NCID): BB07201500
• ISBN:
  • 9783037852156
• 出版国コード: sz
• タイトル言語コード: eng
• 本文言語コード: eng
• 出版地: Durnten-Zurich
• ページ数/冊数: 3 v.
• 大きさ: 25 cm
• 親書誌ID:
  • BA24926058