Advanced engineering materials II : selected, peer reviewed papers from the 2nd International Conference on Advanced Engineering Materials and Technology (AEMT 2012), July 6-8, 2012, Zhuhai, China
Author(s)
Bibliographic Information
Advanced engineering materials II : selected, peer reviewed papers from the 2nd International Conference on Advanced Engineering Materials and Technology (AEMT 2012), July 6-8, 2012, Zhuhai, China
（Advanced materials research, v. 535-537）
Trans Tech Publications, c2012
- : [set]
- Part 1
- Part 2
- Part 3
Available at / 1 libraries
-
No Libraries matched.
- Remove all filters.
Note
Includes bibliographical references and indexes
Description and Table of Contents
Description
This work comprises selected papers from the 2nd International Conference on Advanced Engineering Materials and Technology (AEMT 2012) which was held on the 15th to 17th June 2012 in Zhuhai, China. The peer-reviewed papers are grouped into fourteen chapters: Composites; Micro/Nano Materials; Iron and Steel; Ceramics; Metal Alloy Materials; Biomaterials; Elastomers and Polymers; Optical/Electronic/Magnetic Materials; New Functional Materials; Building Materials; New Energy Materials; Environmental Friendly Materials; Structural Materials and Biomaterials; Chemical Materials.
Table of Contents
Preface and Organizing Committees
Chapter 1: Composites
Mechanical Behaviors of Sic Particle Reinforced Al Matrix Composites: A Study Based on Finite Element Method
Preparation and Properties of Cf-TiB2-Cu-Graphite Composites
Microstructure and Mechanical Properties of In Situ TiB2/6061 Composites
Effect of High-Energy Ball Milling to Powders on Microstructure and Physical Properties of Al-50Si Alloy
The Influence of Nonlinear Matrix on Mechanical Behavior of Polymer Particulate Composite
Study on Biomimetic Composites by Imitating Shell Structure
Preparation and Electrochemical Properties of Amorphous Tin-Copper Composite Oxide CuSnO3
First Principles Study on the Electronic Properties of Cr, Fe, Mn and Ni Doped -Ga2O3
Rapid In Situ Reactive Sintering and Properties of ZrO2-ZrW2O8 Composites
Influence of LiCl Flux on the Process of In Situ Fabrication Aluminum Matrix Composites
Effects of Different Factors on Antibacterial Properties of Crosslinked Chitosan-Coated Ag-Loading Nano-SiO2 Composites
Piezoelectric, Dielectric and Pyroelectric Property in Morphotropic Phase Boundary MnO2 Doped Bi0.5(Na0.82K0.18)0.5TiO3/P(VDF-TrFE) 0-3 Composites
Field Emission of Gallium-Doped Carbon Nanotubes
Study on the Polyethyleneglycol-Based Silicon Wafer Wire Cutting Fluid for its Stability Improvement
Experiment Study on Effects of Critical Factors on Quality of Prototypes in Fused Deposition Modeling
Research on the Structure and Friction Properties of the SiC Particles Reinforced Copper-Based Self-Lubricating Composites
Abrasive Wear Characteristics of In Situ TiC-Reinforced Iron Matrix Surface Gradient Composites
Ultrafine W-Cu Composite Powder Research Progress
Reservoir Fracture Characteristics and its Influence on Oilfield Development in Chang 4+5 Formation in Southern Puziwan Area
The Non-Isothermal Crystallization Kinetics of Dispersible Nano-SiO2/PA66 Composites
Mechanical and Thermal Properties of Reactable Nano-SiO2/polyoxymethylene Composites
Effects of Particle Volume Fraction on Dynamic Deformation Behaviors of B4C Reinforced Aluminum Matrix Composites
Synthesis of Magnetic Fe3O4@TiO2 Nanocomposite and its Photocatalytic Property
Ballistic Impact Testing and Analysis of Triaxial Braided Composite Fan Case Material
Fabrication of Si3N4 Reinforced 316L Stainless Steel Composites by Powder Injection Moulding
Density, Microstructure and Mechanical Property of Large-Scale C/C Composites Prepared by Thermal Gradient CVI
The Tribological Properties of Several PTFE Based Self-Lubricating Composites in Vacuum
Preparation of Polyaniline/SiO2 Composites by Modified Silica Using Succinic Acid
The Effects of Oil Palm Fruit Bunch (OPFB) Fiber and Coupling Agent Loadings on the Performance of Hybrid Composites
The Preparation and Properties of MgO-CaO-ZrO2 System Composite Materials
Preparation and Properties of Ce-Zr-Mn Composite Oxide Oxygen-Storage Materials
Influence of Sintering Temperature and Atmosphere on Phase Makeup of SiAlON-Graphite Composites
The Energy Absorption of Carbon Fiber Reinforced Polymer under Different Impact Speed
Synthesis of Carbon Nanofiber-Titania-Cordierite Monolith Composite and its Application as Catalyst Support on Citral Hydrogenation
Securing Superior Properties of Composite (PP+WF) through Central Composite Design
Preparation and Research on Performance of Fluorine Rubber/Metal Composite Sealing Boards
Collision Ansysis of Sandwiched Polyurethane Composite Steel Tube
Microwave Absorbing Properties of MnO2/Ni-Zn Ferrite/Graphite Structural Composite
Microstructure and Corrosion Resistance of In Situ Al0.983Cr0.017/Al Composites
Damping Properties of Cups-Stacked Carbon Nanotubes (CSCNTs)/RTM6 Composites
Theoretical Study of the Electronic Structures of Li-Doped ZnO
Preparation and Photocatalytic Activity of TiO2/FeOOH Nanocomposite
Tensile Properties on Single-Bar Modified Tricot Fabric Reinforced Composites
Study on Microstructure Characterization of SiCp/Al Composites
The Effect of Heat Treatment on the Microstructure and Mechanical Properties of Multilayered Composites Welded by Explosion
Studies on the Thermal Conductivity of Al2O3/Epoxy Resin Composite Materials
Production of Thermal Insulation Composite Material Based on Polymers
Isothermal Crystallization Kinetics of Poly(phenylene Sulfide)/ZnO Composites
Investigation on Rapid Prediction of Elastic Properties for Woven Fabric Composites
Chapter 2: Micro/Nano Materials
Preparation and Characterization of Regenerated Nanocomposite Made from Bacterial Cellulose/PMMA
Effect of the Addition of Nano- -TCP on the Microstructure of Mg-Zn-Zr Alloy
Synthesis, Characterization and Photocatalytic Properties of CdS Nanorods
Study of the Nano Material Using Diisopropylamine as Replacing Solvent
Preparation and Application of Core-Shell PMMA/Chitosan Nanoparticle
Catalytic Thermal Decomposition of Ammonium Perchlorate Using Cu/Cr Hydrotalcite Derived Nanocomposite Oxides
A Simple Method for Controlling the Morphology of CuO Nanostructures by Droplet
Mesoporous Nano Carbon Sorbents for Separating Different Biomolecules
Selenium Nanoparticles Synthesized via a Facile Hydrothermal Method
Synthesis and Characterization of Co-Ce Codoped TiO2/SiO2/NiFe2O4 Magnetic Mesoporous Microspheres
Synthesis of Spherical SrCO3 Powders by Ultrasonic Waves
Preparation and Luminescence Property of Multi-Walled Carbon Nanotubes/Europium Doped Yttria Oxide Hybrids
Investigation on the Large-Scale Synthesis of PbSe Nanocrystals
Rapid Solvent-Free Melting Synthesis of Tungsten Nitrides with Lamellar, Solid Spherical Nanostructures at a Low Temperature
The Analysis of Noises of Flows across the Superhydrophobic Surfaces with Microscale Structures
Study and Application of Nanomaterials in Drilling Fluids
Preparation of CuS Hollow Microsphere by a Simple Hydrothermal Method and its Catalytic Property
Fabrication of Poly Phosphoric Acid into Polyacrilonitrile Composite Nanofibers
Adsorptive Removal of Rhodamine B from Aqueous Solutions by Carbonaceous Microspheres
Energy Band Calculation of Spiral Single-Walled Carbon Nanotubes
Synthesis of MoO3 Nanostructures and their Photocatalytic Properties
Synthesis and Optimum of Silver Selenide Nanopowder via Room Temperature Conversion Method
The Effect of Strain Rate on the Tensile Behavior of Electrodeposited Nanocrystalline Ni-Co Alloy
Synthesis of Magnesium Oxychloride Nanowhisker by Microemulsion Method
Formation of Cylindrical Nanoholes in Heavily Doped P-Type Si(100) Substrate via Pt Nanoparticles-Assisted Chemical Etching
Synthesis of Highly Ordered Silver Nanowire Arrays with SERS Activity
Solvent Mediated Structure Control of Hierarchical CoS Nanostructures
Formation and Structural Characterization of Novel K2Ti6O13 Nanobelts
Preparation of ZnO Nanostructures and their Self-Assembly
The Preparation of Silver Nanowires and the Study of SERS Activity of Single Nanowire
Study of Degradation Function by the Composition of Nano Bi2WO6 and Graphine
Morphology Modulated Preparation of PbWO4 Nano- and Macrostructures
Research on Preparation of Nanocomposite Antibacterial Agent
Study on Precursor Preparation of Co3O4 Nanometer Particle and its Thermal Decomposition
Preparation and Properties of Nanocomposites Containing FGF-2, other Related Dressings and the Primary Animal Tests
Hydrothermal Synthesis of 3-Dimensional Flower-Like Y2O3:Eu3+ Microstructures and the Luminescence Properties
Synthesis of Fluorinated Silica Nanoparticles and the Wetting Prevention Ability
Preparation and Application of Microencapsulated Flame Retardant Containing Phosphorus-Silicon
The Study on Tribological Properties of the Nanoparticles Additives in Lubricant
Electrooxidation for Methanol on Pd Nanoparticles Modified Electrodes in Alkaline Medium
Effect of Zinc Substitution on Microstructure and Antibacterial Properties of Cobalt Ferrite Nanopowders Synthesized by Sol-Gel Methods
Fragrance and Flavor Microencapsulation Technology
Preparation of Au@Ag Core-Shell Nanorods and Investigation of its Surface Plasmon
Surface Morphology and Texture of Nickel Crystal Micro-Casting by Electroforming under Magnetic Field
DNA/AuNP Fluorescent Detecting Nano-Device
Reaction Mechanism Study on Combustion of Micro Nanometer Iron Powder
Field Emission Properties of the Single-Wall Carbon Nanotubes Synthesized by Arc-Discharge Method
Synthesis of BaMoO4 Nanocrystallites Using Sol-Gel Process
Study on Stabilized of Poly(Vinyl Alcohol) Nanofibers Based Sandwich Structure Purification Material
Photoluminescence Properties of -SiC Nanoparticles by Electric-Pulses Discharge in Liquid-Phase Compound
Heteroe-Pitaxial Growth and Optical Properties of SnO2 Nanowires on ZnS Nanobelts
Functions of Cotton Yield Response to Soil Salinity in Akesu River Irrigation District
A New Type Battery Equalization Circuit of Electric Vehicle
Synthesis and Electrochemical Properties of KMn8O16 Nanorods
Portrait of China's R&D Activities in Nano-Science and Nanotechnology in Bibliometric Study
Chapter 3: Iron and Steel
Study of Adhesion in Steels Surface Hardened
Study on the Flow Stress Curve of the Warm Deformation of Medium Carbon Steel
Preparation of Paclitaxel-Loaded Microspheres with Fe3O4 Nanoparticles and Study of their Target-Orientation and Sustained-Release Property
Effect of Cooling Rate on Microstructures and Mechanical Properties of X80 Pipeline Steel
State Analysis on Reactor Furnace Pipe Used over a Design Cycle
Production of as-Cast High Strength Toughness Ductile Iron
Influence of Tin on Properties and Corrosion Behavior of Q125 Grade Tube Used in Deep Well
Effect of Ferrite Grain Size on the Yield-Strength Ratio of Low-Carbon Alloy Steel
The Effect of Nb on the Microstructures and Hardness of Quenching-Partitioning-Tempering Medium Carbon Steels
Iron Ore Sintering Process Based on Alternative Gaseous Fuels from Steelworks
Fracture of High Carbon Microalloyed Steel Bars Used for Fracture Splitting Con-Rods
Study on Bimetal Compound Casting Technology of Hammers
Effect of Nitrogen on the Mechanical Properties of Heat-Resisting Steel
The Impact on Pellets Quality by Semi-Self-Fluxing Iron Powder
Stability of Reversed Austenite in 9Ni Steel
Modeling and Optimizing Rolling and Cooling Processing-Parameters for C-Mn-Si Economical Dual Phase Steel Produced on CSP
Effect of Annealing Time on the Microstructure and Texture of Interstitial Free Steel
The Microstructure and Characteristic of 410L Stainless Honeycombs Fabricated by Extruding and Sintering
Effect of Tempering Temperature on the Microstructure and Mechanical Properties of a 0.1C Steel with High Strength and Low Yield Ratio
Influence of Austenite Grain Size on the Crystallography of Allotriomorphic Ferrite in a Low Carbon Steel
Cleanliness Evaluation for 55SiMnMo Steels Produced by EAF LF VD Billet Casting Process
Effects of Normalizing Annealing on the Recrystallization Texture of 4.2wt.%Si Non-Oriented Electrical Steel Thin Sheets
Study of the Ti-Mn-Al-Si-O-S Complex Inclusions Inducing Intragranular Acicular Ferrite
Influence of Vanadium on Microstructures and Mechanical Properties of High Strength Normalized Steel
Effect of Strain Rate on Nb(C,N) Precipitation in Micro Alloy Steel Slab
High-Strain-Rate Superplasticity of Big Grains in Spray Forming Ultrahigh Carbon Steel Contain 1.6wt.%Al(UHCS-1.6Al)
Research of the DWTT Fracture of X70 Pipeline Steel
Effect of Boron Mud on Melting Temperature of CaO-Based Steelmaking Slag
Shield Performance of High Boron Alloyed Stainless Steel Composite Plate
The Tempering on Microstructure and the Yield-to-Tensile Ratio of High Performance Steels
Comparisons of Laser Cut and Water Cut for Silicon Steel Plate
Effect of Rare Earth on Inclusions and Impact Property of Ferrite Stainless Steel
The Morphology and Content of Ferrite in Non-Equilibrium Solidified 0Cr18Ni9 Austenitic Stainless Steel
Microstructures, Mechanical Properties and Textures of Deep Drawing Dual-Phase Steel
Creep-Fatigue Interaction Life Prediction for P91 Steel Based on Improved Elman Neural Network Model
The Recrystallization Behavior Study of 3%Si Nonoriented Electrical Steel
Formation of the {111}<112> and {111}<110> Recrystallization Texture in Deep Drawing Low Carbon Steel
Effect of Stabilizing Heat Treatment on Intergranular Corrosion Resistance of Welded Stainless Steel AISI 321
Study on Roll Wear Model for Hot Strip Mill
Corrosion Behavior Analysis of Various Ions in the Soil to the X80 Buried Pipeline
Research on Micro Inclusions of SS400 Steel in Slag Washing Process
Development on a New Interstitial-Free Steel with r 0.3
Effect of Alloying Elements Ti and Nb on Microstructure and Performance of 3.5Ni Steel
Experimental Research on Sintering Amorphous Based Material with Iron-Tailings
Effects of Composite Nickel-Base Boracic Brazing Filler on the Boride near the Brazing Seam of 316L Stainless Steel
Microstructure Transformation of Continuous Cooling of Nb-Ti Micro-Alloyed Low Alloy Steel
Effect of Titanium on Microstructure and Phase Composition of High Boron Alloyed Stainless Steel
Experimental Research on Mineral Processing Technique of a Brazilian Specularite
Experimental Research on the Iron Separation from an Ultra Poor Iron Ore
Preparation, Decomposition and Characterizations of Bangka - Indonesia Ilmenite (FeTiO3) Derived by Hydrothermal Method Using Concentrated NaOH Solution
The Effect of Cold Asynchronous Rolling Technique on High Manganese Steel Mn13
Effects of RE on Critical Cooling Rate of Bearing-B Steel
The Effects of the Sputter-Etching Parameters on the Formation of Conical Protrusions on the Surface of SUS304 Stainless Steel
Study on Microstructures and Properties of 22Mn2SiVBS Steel on Different Cooling Rate
Primary Recrystallization Texture in Rolled (Fe81Ga19)99B1 Sheet
Chapter 4: Ceramic
The Application of SunyPCC800 in CFB Boilers
Effect of Ta, Nb and V Additions on the Microstructure and Mechanical Properties of (W,Ti)C-Co
The Properties of YSZ-Ni-Cr Cermet Fabricated by Sol-Gel Method
Study of Nb-Zn-Mn Co-Doped Ba(Ti,Zr)O3 Ceramics
A Rational Way to Prepare BaTiO3 Ceramics
Fabrication and Effects of Different Average Grain Sizes on Thermal Conductivity of Nd:YAG Ceramics
Effect of Glass Additions on Ca[(Li1/3Nb2/3)0.92Zr0.08]O3 Microwave Ceramics
Effect of Roasting Process on the Properties of Alumina-Based Ceramic Core
Microstructure and Toughening Mechanism of ZrO2 Ceramic
Effect of Different Nucleating Agents on the Microstructure and Properties of LMAS Glass-Ceramics
The Influence of Al2O3-AlN Compound Additive on the Crystallization Characteristics and Properties of Fused Quartz Ceramic Materials
Study on Preparation and Property of Woodceramics
Microwave Dielectric Properties of Low-Temperature Sintered Ca[(Li1/3Nb2/3)0.95Zr0.05]O3 0.04TiO2 Ceramics
Effect of MgO on the Microstructure of Polycrystalline Nd:YAG Ceramics and its Action Mechanism
Influence of CeO2 and Sintering Parameters on the Performance of Vitrified Bond Diamond Abrasive
Method of Improving Dielectric Properties of AlN Ceramic
Preparation and Application of Magnesium (II) 2,2,2-Trifluoroacetate as an Efficient Catalyst for the Catalytic Preparation of 1-Amidoalkyl-2-Naphthol Derivatives
Preparation and Characterization of SrO-Fe2O3-FeO-SiO2-B2O3 System Hexaferrites Glass-Ceramics
Synthesis of CaO-Na2O-Fe2O3-FeO-B2O3-SiO2 Glass-Ceramics for Hyperthermia Application by Aqueous Solution-Melt Method
Chapter 5: Metal Alloy Materials
Analysis of Copper and Copper Alloys Electric Components Short Circuited Melted Mark Metallographic Structure
Study on the AZ31B Magnesium Alloy in the Application on High-Speed Trains
Chapter 5: Metal Alloy Materials
Effect of Cr and Ni Contents on Microstructure and Properties of High Boron Stainless Steel Composite Plate
Microstructural Evolution of the [001] Oriented Single Crystal Superalloy DD6 Creep at 760 DegreesC and 785 MPa
Supercapacitor Fabrication by Titanium Alloy
Study on the Quenching Microstructure of Fe-0.36C-1.4B Alloy
Ageing Precipitation and Strengthening Behavior of the Spray Formed Al-Zn-Mg-Cu Alloy
The Microstructure and Mechanical Properties of Super-High Strength Al Alloys by Spray Forming
Research on a New Type Grain Refiner Refining -Al by Adding Molten State and Diluted Al-Ti-B-RE Master Alloy
Effects of Ni/Ti Ratio and Heat-Treatment on Transformation Temperature, Mechanical Properties and Shape Recovery Strain of Ni-Ti-Nb Alloy
Effect of Rolling Deformation to Microstructure and Properties of Mg-8.5Li-1Al-1Ce Alloy
Fatigue Behavior of GH4169 Alloy up to Very High Cycles
Effect of Ti Content on Microstructure and Hardness of A356 Alloy
Fractal Characteristics of Primary Phase Morphology in Semisolid A356 Alloy
The Effect of Cold-Drawing on Recovery Stress of Ni-Ti-Nb Shape Memory Alloy
Study on the Mechanical Property and Microstructure of Surgical Implanted Ti-6Al-7Nb Titanium Alloy
Influence of Gd Addition on the Structure and Capability of Ni-Mn-In Metamagnetic Shape Memory Alloys
Effects on the as-Cast Structure of 7075 Aluminum Alloy by Treating with Electrical Pulse Inoculation
Adjusting Microstructure and Magnetic Properties of Ni-Mn-In Metamagnetic Shape Memory Alloys by Addition of Gd
Some Studies on Preparation of Large Spray Deposited Aluminium Alloy Tube Preform
Study on Cyclic Load Creep Test of the Nickel-Based Super Alloy K403
Study on Present Situation and New Trends of the Electrodeposition of Nickel-Cobalt Alloy
Thermal Flow Deformation Behavior and Mechanism of As-Cast and As-Extruded Burn Resistant Titanium Alloy
Experimental Study on the Mineral Processing of a Certain Low Grade Copper-Molybdenum Ore in Xinjiang
The Influence of Composition on the Material Structure and Performance of 3104 Aluminum-Alloy Canbody Material
Influence of Titanium Alloying Element Substrata on Bacterial Adhesion
Effect of KBF4 Addition on the Microstructure of Mg-6Zn-1Si Alloy
Site Preference and Elastic Properties of 3d Transition Metals Alloying Addition in Ductility YAg Alloys
Bending Properties of AA7055 Aluminum Alloy Reinforced with In Situ TiB2 Particles
The Influence of Ni on the Microstructure of Co-Base ODS Alloys
Atomistic Simulation for the Site Preference of Tb3(Fe28-XCoX)V1.0 Compounds
Formation Mechanism of Low Angle Boundary of DD6 Single Crystal Superalloy Blades
Investigation on Dislocation Network in Al-5.8Cu Aluminum Alloy Impacted Plate
A Study on Influence of Annealing and Aging on High Temperature Internal Friction in Al-Zr Alloy
Study of Crystal Structural about La2/3(Ca(1-X)ZnX)1/3MnO3
Precise Re-Os Dating of Molybdenite from the Northern Dabie Molybdenum Belt in Central China and its Geodynamic Implications
Chapter 6: Biomaterials
Synthesis and Structure Determination of Carbonized Nano Mesoporous Materials Based on Vegetable Raw Materials
Comparative Analysis of Bacterial Diversity for Cutlassfish (Trichiurus haumela) during Cold Storage by the Culture-Dependent and Culture-Independent Methods
Effect of Modified Atmosphere with Varying O2 Concentrations on the Quality of Packed Pacific White Shrimp (Penaeus vannamei) during Cold Storage
Preparation of High Water Absorption and Retention Material by Graft Copolymerization of Calcium Lignin Sulphonate with Acrylic Acid and Acrylamide
Research on Viscoelasticity and its Influence Factors of Polymer Solution
Structure of Patinopecten Yessoensis Shell is a Biomimetic Example of Composite
How to Strengthen the Sense of Solid Wood of Frame-Board Type Furniture
Using RAFT Polymerization to Synthesize Potential Drug/Gene Delivery System
Rheological Property and Miscibility of Lignin-Based LDPE/EVA Blends with Compatibilizer
Synthesis of Graft Copolymer by Using Acrylamide and Methacryloyl Chloride Guar Gum and its Adsorption Behavior to Metal Ions
Synthesis and Characterization of Poly Phenoxyl Bisphenol-S Phosphate
Fabrication and Characterization of Poly L-Lactic Acid/Modified Nano-Hydroxyapatite Composite Fibrous Scaffold
Dissolution of Cellulose in [Amim]Cl/Lithium Salts Solvents System
Research Progress on Tissue Engineering of Neural Stem Cells
Effects of Calcination upon Properties of Needle-Cokes
Analysis for Stress-Strain Curve during Stretching Coarse Yak Hair with Different Pretreating Condition
Study on the Variety Identification Method of Bast Fibers
Mechanical and Thermodynamic Properties of Chlorophyll-a Surfactants at Air-Water Interface
Study on Multi-Elements in Traditional Chinese Medicines Ophiopogon japonicus and Lotus Seeds by the ICP-AES with Microwave Digestion
Chapter 7: Elastomers & Polymers
Study and Application on Layered Polymer Injection with Concentric String
Effect of Hyperbranched Polymer on Crystallization Kinetics of Isotactic Polypropylene
Effect of Process Parameters on Jet Length in Electrospraying of Thermoplastic Polymer
Preparation of Rigid Flame Retardancy Polyurethane Foam Material with Difficult Combusted Degree
Properties of High Solid Content UV Curable Waterborne Polyurethane Dispersions with Different C=C Content
The Reaserch of Displacement Oil of the Polymer System with the Low Interfacial Tension Conditions
Evaluation of the Thermal Stabilization Effect of Maleic Anhydride Derivatives on Polyvinyl Chloride
Synthesis of Hydrophobic Modified Polyacrylamide Functional Materials in Supercritical CO2
Discussion upon the Draft Ratio Affecting PEN-PPS Filaments
Research on Corrosion and Scale Inhibition Performance of HEDP
Synthesis and Phase Behavior of Polysiloxane Nematic Liquid Crystal Elastomers
Shear Studies on Polymer Flooding Systems with High Concentrations
Preparation and Characterization of Elastomers Based on Polydimethylsiloxane/Poly(methyl methacrylate) Blends
Analysis and Prediction of Damping Properties of Multi-Layered Organic Hybrid Materials Consisting of Polarized Polymers and Small Molecules
Characterization and Modification of Nitrile Rubber in the Transformer Oil
Capacitance Fading Induced by Degradation of Polyaniline: Cyclic Voltammetry and SEM Study
The Research of EVA to PLA/E-AA-GMA Blend Materials Toughening
Effect of CMCS on Vulcanization Kinetics of Natural Rubber
Influence of Chiral Maltose on the Mesomorphic Properties of Main-Chain Liquid-Crystalline Polymers
Manufacturing of Porous Biomaterials for Dental Implant Applications through Selective Laser Melting
Chapter 8: Optical/Electronic/Magnetic Materials
Magnetism Study of Spin Correlations in Bi0.5Ca0.5MnO3
Synthesis and Fluorescence Property of Novel Zn2+ Schiff Base Complex
Oxygen Content Change Characters and the Influence Superconductivity in the Doped YBCO Systems
Research on Two-Stage Three-Phase Photovoltaic Grid-Connected System
Recent Progress in Developing Magnetic Properties of Mn-Doped ZnO Diluted Magnetic Semiconductors
Study on the Crystal Size of PCBM in Organic Photovoltaic Cells
Electrogenerated Chemiluminescence and Sensory Property of Rubrene Microparticles Immobilized on ITO Electrode
The Two-Photon Excited Fluorescence of Pyrazine Derivatives
The Optical and Structural Properties of InxGa1-XN/GaN Multiple Quantum Wells by Metal Organic Chemical Vapor Deposition
Study on Ultrasonic Electroforming Ni-P Coatings on NdFeB Permanent Magnet
Upconversion Luminescence Property of Nanocrystalline Y2O3:Pr3+,Yb 3+
The Effect of Environment on Photovoltaic Module Efficiency
Theoretical Study on Electronic Structures and Spectroscopic Properties of Indene-C60 Monoadduct (ICMA)
An Investigation of Half-Metallic Ferromagnets Behavior in Hg2CuTi-Type Heusler Alloy Ti2FeAl by Using GGA
Effect of Nb Doping on Electronic and Magnetic Properties of Heusler Alloy Ti2NiAl with Hg2CuTi-Type Structure
Temperature Dependent Characteristics of 1D Photonic Crystal with Defects
A New Design of Photonic Crystal Fiber with Fattened Dispersion and Low Effective Mode Area
Research on the Relationship between the Spray Overlap Width and the Photoresist Film Thickness and Uniformity
Research on Composite Powder and Magnet Properties of Bonded NdFeB Magnets
Giant Magnetoresistance in (Ni60Co30Fe10/Cu) Trilayer Growth by Opposed Target Magnetron Sputtering
Synthesis and Characters of Fe3O4/AMPS Magnetic Composite Material
Synthesis and Luminescence Property of Poly(phenylenevinylene) with Alkoxyl Substituents under the Ultrasonic Irradiation
Optimization of the Two Parameters of Classical Blaze Grating in Littrow Mount
A Study on Gadolinium Sensitized Chemiluminescence System
Influence of Gd3+ Doping Quantity on Magnetic Performance of Co2Z Hexaferrite
Ascertainment of the Figure of Merit for the State-of-the-Art Thermoelectric Materials via Temperature
Current-Voltage Characterization on Au-DNA-Au Junctions under the Influence of Magnetic Field
The Application of Symmetrical Equation of Diffracted Wavevectors in Integral Theory of Gratings
Two-Photon Luminescence in Yb:YAG
Chapter 9: New Functional Materials
The Research Progress of Embedded Solid Lubricant Materials
New Luminescent Mesoporous Material Covalent Bonded with Europium (III) Organic/Inorganic/Polymeric Hybrid
The Research on Wear Resistant Polyurethane Hose Capable of Being Flat
Functionally Graded Plates under Thermal and Moisture Effects
Synthesis and Properties of Acrylate Modified Waterborne Polyurethane Emulsion
Study on Release of Anion Concentration about Negative Oxygen Ions Fabric
Using Paper as Reinforcement in Silty Sand
Effect of Multi-Material Substitutions on Static and Dynamic Properties of Electric Vehicles
Influence of Construction of Textile Material on Performance of Warp Sizing
Non-Isothermal Crystallization Behavior of Poly(trimethylene Terephthalate-Co-Isophthalate) Copolyesters
Facile Synthesis of near-Infrared-Emitting Water-Dispersed CdHgTe/CdS/ZnS Core/Shell/Shell Quantum Dots
Study on the Fiber Bending Deformation during Knitting Process
Comparative Research of the Sizing Performance of the Compact Spun-Yarn and Ring Spun-Yarn
Sound Insulation Property of Warp Knitted Fabrics
Tensile Property Test Analysis of Double Protein Modified Fiber
Creation Based on Superhydrophobic Soot Waterproofing Materials Obtained in Flames
Synthesis of Novel Separation Materials Based on Molecular Imprinting Technology
Characterization of Indium-Doped CdZnTe Crystal Grown under Te-Rich Conditions
Physical Chemistry of Fermentative Hydrogen Production Mechanism
A Geometric Analysis of the Loop Form of a Tricot Stitch Knitted Fabric
Analysis of the Influence of Static Flow Resistance on the Sound Absorption Properties of Aluminum Foam
Application of the KH560 on Improving the Interface Fastness of Composites of Starch and Cotton Fiber
Reduced Graphene Oxide Nanosheets Functionalized with Bile Salts as Support for Electrochemical Catalysts
Study on the Supercritical CO2 Art of Dyeing
The Dynamics and Governance of Tongxiang Sweater Cluster Based on GVC
The Study on Properties of Kapok Nonwoven Material
Photocatalytic Degradation of Nanometer TiO2 Sol Composed Fabric to Dye
Synthesis and Photophysical Characterization of Dendritic 8-Hydroxyquinoline Complexes
Preparation and Characterization of the Hydrophilic Copolyester
Study on the Wool-Solospun Spinning Technology
The Influence of Electrode Materials on the Electrical Degradation Process of Lead Zirconate Titanate under Harsh Operating Environment
Biomimetic Synthesis of Prismatic Calcite Mesocrystals in the Presence of Nonionic Copolymer
Synthesis and Characterization of Polyacrylates Side-Chain Liquid Crystalline Polymer via Atom Transfer Radical Polymerization
Synthesis and Spectral Properties of Polymeric Dye from Waste Plastic
A High-Throughput Screening of N-Carbobenzoxy-L-Tryptophan Imprinted Polymers and their Application for Monolithic Chiral Stationary Phase
The Study on Nano-Silica Modified Phenolic Resin Used as the Magnesite-Carbon Brick Binder
Wound Dressing Utilising Nonwoven Wool Matrix
Numerical Simulation for the Optimization of the Angle of the Velocity of the Hydrogen in the High Performance Hydrogen Bell-Type Annealers
Researches on the Fixation Performance of Chitosan and its Derivative
DFT Study on Structures, Stabilities and Electronic Properties of Tert-Butyl Silsesquioxanes Si2nO3n(CMe3)2n (n=1-6)
Elastic Modulus of Rhombus Dodecahedron Closed-Cell Cellular Materials
4.9tex x 2 Cotton / Pearl 65/35 High Count Blended Yarn Spinning Process Design
Optimization of Separation Process of Waste Polyester-Cotton Fiber by Using Response Surface Analysis
The Antistatic Research of Polyester/Nylon Fabrics Finished by Triblock Copolymer Containing Organic Silicon
Research on Open-Cell Rigid Polyurethane Foam as Vacuum Insulated Panel Core
Effect of Laundering Temperature on the Color of Brown Naturally Colored Cotton
Influence of Fractal Structure on Light Absorption of down Fiber Assembly
Study of the Hydrophobic Modification of Chromium Sesquioxide with Lauric Acid
Preparation and Characterization of Ternary Composite Composed by Chitosan, Porphyrin Derivative and Single-Walled Carbon Nanotubes (SWCNTs)
Fuel Cell Electric Vehicle Energy Management Strategy Simulation Study
Adsorption of Cu (II) from Aqueous Single Metal Solutions by Bagasse Pith Chemically Modified with EDTA Dianhydride (EDTAD)
The Investigation of Dyeing Properties of Anion Modified Linen Fibers
Influence of Heat Insulation Material on Thermal Stress of Long Nozzle
Synthesis and Luminescence Characteristics of Mg (II) Complexes with 5-Bromosalicyladehyde-Nicotinoylhydrazone
Effects of BaF2 Addition on Properties of Strontium Barium Niobate Based Glass-Ceramics for Energy Storage Capacitors
Different Natural Season Weathering of B.mori Silk Fabric
Study on Crystallization Kinetics of Li2O-Al2O3-TiO2-P2O5 Glass by Non-Isothermal Technique
Biological Performances of Titanium Scaffolds: A Review
Chapter 10: Building Materials
Study on Coal Roadway Supporting Parameters of Broken Thick Top-Coal Large Section
Simulation on NOx Generation of RSP Calciner for Cement Production
Research on Perfomance of Vulcanized Eucommia Ulmoides Gum Blending with Asphalt
Experimental Research on Strengthen Mechanism of NaOH on Light Wall Materials Prepared from Crushed Brick Powder
The Performance Study of the Open Channel Concrete in Cold Area
Research Progress of Energy Conservation Architectural Coatings
Influence of Nano-Clay on the Performance of phosphoaluminate cement
The Study on the Application of Material Media in the Modern Decorative Art
Properties Research on Chiral Liquid Crystalline Polysiloxanes Containing Chiral and Electron Withdrawing Group
Study on Full-Slag Concrete Feasibility
The Effect of Asphalt Binder Aging on Fatigue Performance of Evotherm WMA
Experimental Research on Durability of Fair-Faced Concrete
Experimental Study of the Characteristics of Damp and Efflorescence Mechanism for Building Brick
Flexural Behavior of near Surface Mounted CFRP Bars Strengthened Reinforced Concrete Beams
Study on Water-Rock Interaction in Sea and Freshwater Transitional Zone
Research on Aging Properties of Tourmaline Modified Asphalt
Effect of Gradation and Cement on the Properties of Soil-Cement Mixtures
Properties Improvement of Fired Clay Bricks Incorporating with Cigarette Butts
Investigation of Road Performance and Colloidal Structure of Tourmaline Modified Asphalt
Dry Shrinkage and Compressive Strength of Blended Cement Pastes with Fly Ash and Silica Fume
Chapter 10: Building Materials
The Application of the Deep Carbonized Woods to Building Skins
Mechanical Analysis and Numerical Simulation of Steel-Ring and Rigid-Frame Restrained Concrete
Experimental Study on Rock Breaking with Impacting Water Jet by Modulation of Chaos
Experiment Study of Influence Factors on High-Temperature Stability of Closely Gap-Graded Bituminous Mixture
Research on the Adobe Wall of Traditional Civil Structure Dwelling in Tianshui & Guanzhong
Experiment Study of Reclaimed Asphalt Pavement Gradation Fluctuation on Influence of Central Plant Hot Recycled Mixture Performance
Preliminary Study about the Sediment Carrying Capacity Formula
Three-Dimensional Sediment Numerical Simulation of Wenzhou Oufei Tidal Flat Sea Area
Experimental Research on Dynamics Characteristics and Damage of ALC Wallboard
Service Life Prediction of Reactive Powder Concrete due to Seawater Infiltration
Influence of Air Content on the Compressive Strength of Concrete
Analysis and Evaluation for Longxihe Dangerous Rock Stability
A Method Based on Neural Network for Risk Prediction of the Typical Moraine-Dammed Lake Outburst in the Himalayan Region
Laboratory Fast Corrosion Test of Plain Steel Bars in Concrete Beams
Study on Compaction Characteristics of Solidified Mud with Different Proportion of Curing Agent
A Homogenisation Procedure for the Steady State Periodic Forced Response of Laminated Composite Beams at Large Vibration Amplitudes
Production of Bitumens from Coal Sources Modified by Elementary Sulfur
Research on the Influences of the Molding Processes of TOR Asphalt Rubber Mixtures upon the Pavement Performance
Review of Researches on Carbonization of Concrete: Influencing Factors and Forecast Models
Study on the Rule of Temperature Descent for Large Stone Asphalt Mixtures
Kyanite Ore Beneficiation Experimental Research in Hebei
Performance and Mechanism Study on C50 Micro-Expansion Polypropylene Fiber Reinforced Anti-Cracking Pumping Concrete
Study on the Factors Affecting the Anti-Seismic Performance of Steel Reinforced High-Strengh Concrete Columns
The Discussion of Iron Wire Fire Hazard
Study on Influencing Factors and Control Measures of Diaphram Wall Panel Trench
Research on Accelerated Corrosion of Steel Bar in Reinforced Concrete Components
Problems and Solutions of High-Rise Buildings in Coupling Beam Design
Using New-Type Composite Silicate Heat-Insulation Material to Improve Residential Energy Efficiency in Regions of Cold Winter and Hot Summer
Evaluation of the Strain-Softening Law of Concrete from the Fracture Test
Study of the Effect of Boron Carbide Content in Concrete as Radiation Shielding Application
Mechanical Properties of Rocks Used for the Construction of Vehicular Bridges Supported by Pier Masonry
The Study of Using Fly Ash to Produce Ultra High Performance Fibre Reinforced Concrete
Observation about Architecture Skin Using New Material
Contrastive Study on Mineralogy of Brazil Kaolinite and Beihai Kaolinite
Fly-Ash Usage in New Cement-Based Material for Concrete Waterproofing
An Experimental Study on Ductility of Fiber-Strengthening Concrete
On Performance & Application Prospect of Inorganic Materials Used for Exterior Walls Insulation in Hot Summer and Cold Winter Zone
Experimental Study on Flexural Behaviors of All-Lightweight Aggregate Concrete Slabs
Effect of Anisotropy on Shear Wave Velocity in Wood
Test on Corrosion Resistance of GFRP Anchor Bolt
Experimental Study on Mix Design of Plastic Concret with Lower Elastic Modulus and Higher Impervious Coefficient
Experimental Investigating of Latex Cement as Similar Material Simulating Soft Rock Creep
Application of FLAC to Study on Anchorage for Mountain Slope
Thermal Conductivity and Strength Properties of Soil-Based Lime Adobe Stabilized with Pottery Burnt Hull Ash
Study and Application of a Modified Agent GHPC-1 for Green High-Performance Concrete
Thermal Stress Numerical Simulation on Concrete Hydration Heat of Giant Floor in Deep Foundation Pit
Effect of Polypropylene Fibers on the Toughness of Concrete Materials
Structural Performance of Chinese Larch Plywood
Development of a Fire Resistant Low Alloy Steel for Construction
Division of Frost Damage Grades and its Prevention Measures in Tunnel
The Engineering Technology Index Analysis of the Low-Carbon Building
A Novel Hydrophobic-Induced Method for Water Soluble Silk Fibroin
Finite-Element Analysis on Carbon Fiber Reinforced Polymer (CFRP) Plates Reinforcement for the Rigid Joints of Steel Structures
The Matching of Flow Control and Structure Parameters for the Bitumen Foaming Technology
Analysis of Structural Properties and Seismic Performance of a Temple
Study on the Structural and Aseismatical Performance of Multi-Storey Ancient Chinese Timber Structure Shangyou Tower of Palace Style
Overall Dynamic Analysis of K-Reticulated Shell Structure with BRB in Severe Earthquakes
Research and Analysis to Find the Optimal Parameters to Reducingharmful Vibrations of the Inverted Pendulum System
Seismic Analysis of Soil Nailed Wall Using Finite Element Method
Practice and Theoretical Thought on the Supporting for Soft Rock
Chapter 11: New Energy Materials
Study of Micro-Inclusion of Beam Blanks
Groove Resistance Simulation Analysis and Fault Detection of Aluminum Reduction Cell
Research on Evaluation System of China's Energy Security Considering Energy Transportation
A Single Ion Conducting Gel Polymer Electrolyte Based on Poly(lithium 2-Acrylamido-2-Methylpropanesulfonic Acid-Co-Vinyl Triethoxysilane) and its Electrochemical Properties
Superconducting Magnetic Energy Storage Summarize
Study on the Application of N,N'-1-Ethyl-4-Butyl, Triethylene and Diamine Hexafluorophosphate in Supercapacitors
An Investigation of the Electrochemical Hydrogen Storage Performances of the RE-Mg-Ni-Based A2B7-Type Electrode Alloys Prepared by Melt Spinning
The Influence of Interface Silicon Oxide Layer on Photovoltaic Effect of Iron-Doped Amorphous Carbon Film/SiO2/Si Based Heterostructure
CdTe Solar Cells on Flexible Metallic Substrates
Using Natural Dyes to Prepare Nanoporous TiO2 Dye-Sensitized Solar Cell
Physical and Electrochemical Properties of a Mixed Lithium Phosphate as Cathode Material for Lithium Ion Battery
Preparation of Zirconia-Yttrium Fibres from Steady Precursor by Sol-Gel Technique
Summary of Lithium-Ion Battery Polymer Electrolytes
Thermoelectric Power Generation System with Loop Thermosyphon and TiO2-Nanofluids
Effect of Heat-Treatment on the Activity of Nickel Phthalocyanine Catalysts for Oxygen Reduction Reaction in Acid and Alkaline Electrolytes
Catalytic Processing of Coal into Liquid Fuels: Mechanochemical Activation of Coal
The Preparation and Characterization of a Novel Biodiesel Named Curcas Oil Diethylene Glycol Ether Ester
A Survey of Nuclear and Solar Energy
Chapter 12: Environmental Friendly Materials
Preparation of Domestic Honeycomb Briquette from Corn Stover and Coal
The Influence of Mechanochemical Treatment on the Acid and Catalytic Properties of Modified Natural Zeolite
Polymermetallic Catalysts with Nano-Sized Particles on the Basis of the Palladium and the Potassium Humate
The Analysis of Tianjin Subway Environmental Control System
Effect of CeO2 Promoter on Catalytic Performance of CuO-ZnO-ZrO2/HZSM-5 Catalyst for Carbon Dioxide Hydrogenation into Dimethyl Ether
Experimental Study on Synthesis of Adsorption Material of Porous Zeolite with Fly Ash
Waste Paper Application in Geotechnical Project
Experimental Study on Treatment Phenolic Wastewater by Polymerized Silicate Containing Aluminium Sulfate and Magnesium Sulfate
A Free-Lead and Cadmium of Antimony Ruby Glass Composition and its Preparation Method
Assessment of the Effects of Land Use Change in Upper Catchments of Lake Kivu on its Water Quality
Optimization of Preparation Process of La-Ce-Palygorskite Catalysts for NO Decomposition by Response Surface Methodology
Research on Corrugated Cardboard and its Application
Polycarbonate from the Copolymerization of Carbon Dioxide with Epoxide
Sol-Gel Preparation and Characterization of SiO2/TiO2 Composite Mesoporous Materials with Bacterial Cellulose for Photocatalysis of Methyl Orange
Research Nanostructurized Carbon-Containing Catalysts on the onkeris Clay Base by Physico-Chemical Methods
Preliminary Research on the Uptake Behavior of Ammonium Molybdophosphate for Cesium and the Corresponding Structural Transformation
Study on the Defluorinated Materials of High Fluoride
Study on Mechanism of Removing the Organic Matter in Heavy Oil Sewage by the Electric Flocculation Method
Influence Factors and Kinetic Study on Photocatalytic Degradation of Rhodamine B by Fe-Doped TiO2/Diatomite Composite
Estimating the Energy Carbon Footprint of Huangshan National Park
Study on the Photocatalytic Degradation of Bisphenol a by La3+ Doping TiO2 under Sunshine Irradiation
Preparation of Poly(vinyl Alcohol)(PVA)/peat/clay Composite Beads as Adsorbents for the Removal of Pb (II) and Zn(II) Ions from Aqueous Solutions
Study on Preparation of Compound Activated Carbon Adsorbent and Effect of Thiophene Adsorption
New Closed UV Sterilizer Application of Wastewater Treatment
Progress in Modified MBR with TiO2 for Wastewater Reuse
Preparation of Nanosized TiO2 Synthesized by Sol-Gel Pathway Using Ionic Liquid as Assistant and its Photocatalytic Activities
The Purifying Capacity and Influential Factors of Wetland Soil to Phenol
Fouling Removal Technology with Intermittent Rotation Spiral-Insert
Catalytic Dechlorination of Para-Nitrochlorobenzne in Wastewater through a Nanoscale Nickel-Iron Bimetallic Catalyst
R&D on Wollastonite of Advanced Materials and Low Carbon Products
Study on Treatment of Waste Emulsion with Pulse-Electrolysis
Chapter 13: Structural Materials and Biomaterials
Correlation Analysis between Single Nucleotide Polymorphism of Fatty Acid Synthase and Fatness Traits in Chickens
Study on Scale Inhibition Performance of Polyaspartic Acid Derivative
Study the Biodegradation of a Injection Human-Like Collagen Hydrogel
Synthesis and Characterization of Carboxymethyl Chitosan/Human-Like Collagen Hydrogel
Study on the Bio-Composite from Sisal Fiber Reinforced Cellulose Acetate
Preparation of Transglutaminase Cross-Linked Tilapia Scale Collagen Microspheres Containing L-Ascorbic Acid
The High-Cell-Density Fermentation of Recombinant Escherichia coli Based on the Control System
The Advantage of Automatic Control in Human-Like Collagen Production by Recombinant Escherichia coli BL21
Structure of Antheraea pernyi/Bombyx mori Silk Fibroin Scaffolds
Sodium Alginate Extraction by Enzyme-Ultrasonic Combined Method
Optimization of the Extraction of Coconut Protein and the Evaluation of Antioxidant and ACE Inhibitory Activities of its Enzymatic Hydrolysates
Chemical Analysis and Antioxidant Activities In Vitro of Polysaccharide Extracted from Corn Silk
Preparation and Electrospinning of Acidified-Oxidized Potato Starch
Formation of Silkworm-Like Vaterite via Orientated Attachment Process
Ionic Liquid-Regenerated Cellulose Beads as Solid Support Matrices for Papain Immobilization
Producing Cellulase on Phanerochaete chrysosporium by Fermentation and Breeding by Induced Mutation of Cellulose-Degrading Phanerochaete chrysosporium
Study on Biocompatibility of Post-Irradiated Silk Fibroin In Vitro
Effect of Gamma Irradiation on the Biocompatibility and Biodegradation of Silk Fibroin In Vivo
Cellulose/Collagen Beads Prepared Using Ionic Liquid for Cu(II) Adsorption from Aqueous Solutions
The Surface Micro-Morphology Transition of Pearls Induced by Cerium
Increased Dissolution of Lignocellulosic Biomass in Ionic Liquid 1-Butyl-3-Methylimidazolium Chloride at High Temperature
Nanospheres Conjugated with Hab18 as Targeting Carriers for Antitumor Drug
DBD Plasma Induced Mutation in Phosphate-Solubilizing Bacteria Acinetobacter CalcoaceticusYC-5a
Effect of PEO on the Hydrophilicity of PLLA Ultrafine Fibers
Build and Apply of Granular Sludge Enriched by Phosphorus Accumulating Organisms
A Novel Method for Preparing the Surface Molecularly Imprinted Polymers to Target Isolate Ginsenoside Rg1 and its Analogues
Antimicrobial Peptides from Musca Domestica Expressed in Escherichia coli
Flexural Properties of Bio-Composite Made from Hydrothermally Treated Kenaf (Hibiscus cannabinus) Fibres
Correlation Analysis between Single Nucleotide Polymorphism of the Lipoprotein Lipase and Fatness Traits in Chickens
A Method for the Introduction of Acetylthiol Groups into Recombinant Human-Like Collagen
Apoptosis of Human Leukemia Cell Line K562 Cells Induced by Hydroxycamptothecine
Efficient Syntheses of 2-Chloro-2'-Deoxyadenosine (Cladribine) from 2-Chloroadenosine
Study on the Photosynthetic Efficiency of the Michelia alba Leaves by Using Photo-Acoustic Tomography Spectroscopy Technology
Effect of ADM on Proliferation and Apoptosis of Human Gastric Cancer Cell SGC-7901
Hydrolysis Kinetics of Cornstalk in Formic Acid Solution
Hydrolysis of Bamboo Fiber for Production of Fermentable Sugars in Saturated Formic Acid
Biosorption of Uranium by Deinococcus radiodurans Cells under Culture Conditions
Electrodeposition of ZnO Nanosheet Structures and their Application for Glucose Biosensor
Chapter 14: Chemical Materials
Utilization of Scoria as PRB Reactive Media for the Removal of Petroleum Hydrocarbon from Groundwater
Dilute Sulfuric Acid Pretreatment and Enzymatic Hydrolysis of Corn Stover into Fermentable Sugars
Synthesis and Electroluminescent Property of Bis{2-(naphtha [3,4]imidazol-2-Yl) Pyridinato} Magnesium
Hydrothermal Oxidation of Phenol with H2O2
The Stannous Complex of Succinimide as Multifuctional Additive for Lubricating Oils
Preparation and Mechanism Analysis of High-Efficiency early Strength Agent
A Novel Approach to Get Bisphenol-a Bis(Diphenyl phosphate)
Synthesis and Properties of Silicone Modified Acrylate Emulsion
Integrating Grey Relational Analysis with Combination Weighting for Selecting Bearing Material
Applied Research of the Flexible Epoxy Resin Curing Agent
Calculation Model of Activity for Slag System of CaO-SiO2-Fe2O3
Impaction of Graphite Type on Performance of Polycrystalline Diamond Powder
A New Type of Compatilizer and its Application in Polystyrene Ether/Nylon 66 Alloy
Research on the Rheological Properties of Domestic and International PPS Resin
Effect of Applied Voltage on Polymer Aggregation in Electrospraying of Thermoplastic Polymer
Study on the Characterization and Application of Poly-Silicate Magnesium Ferric Sulfate Borate (PFMSSB)
First-Principles Investigation of ThO2
Study of Fibrous AlPO4-5 via Hydrothermal Conditions: Morphology Evolution and Growth Mechanism
Synthesis, Characterized and Biological Activities of Chalcone Derivatives
Dielectric Characteristics of Hydrated Paraffin
Predicting Impact Sensitivity of Heterocyclic Nitroarenes from Molecular Structures Selected by Genetic Algorithm
Effect of BPR on the Preparation of Nb-Base Powder via Ball Milling
The Influence of the Viscosity of Edible Ink to Ink-Jet Printing Drop State
Study on Preparation and Hydrophobicity of MTES Derived Silica Sol and Gel
Synthesis of Ba2B5O9Cl Whiskers via Flux Method
Flame-Fusion Growth of Rutile Single Crystal
Effects of Supercritical Carbon Dioxide on Interfacial Properties of Carbon Fiber
Synergistic Effects of Colour Protective Agent and Modified Atmosphere Packaging on the Preservation of Litchi (Litchi chinensis Sonn.) Fruit
Determination of Mineral Elements in Fermented Liquid with Temperature-Controlled Wet Digestion and Flame Atomic Absorption Spectrometry
OD-Characterization of the Symmetric Group S49
Morphology and Mechanical Properties of PA6/ABS Blends
Preparation of Semisolid Feedstock by Reversed Cone Channel Pouring
by "Nielsen BookData"