Advanced engineering materials II : selected, peer reviewed papers from the 2nd International Conference on Advanced Engineering Materials and Technology (AEMT 2012), July 6-8, 2012, Zhuhai, China

著者

• International Conference on Advanced Engineering Materials and Technology
• Cui, Cunxiang
• Li, Yali
• Yuan, Zhihao

書誌事項

Advanced engineering materials II : selected, peer reviewed papers from the 2nd International Conference on Advanced Engineering Materials and Technology (AEMT 2012), July 6-8, 2012, Zhuhai, China

edited by Cunxiang Cui, Yali Li, Zhihao Yuan

（Advanced materials research, v. 535-537）

Trans Tech Publications, c2012

• : [set]
• Part 1
• Part 2
• Part 3

注記

Includes bibliographical references and indexes

内容説明・目次

内容説明

This work comprises selected papers from the 2nd International Conference on Advanced Engineering Materials and Technology (AEMT 2012) which was held on the 15th to 17th June 2012 in Zhuhai, China. The peer-reviewed papers are grouped into fourteen chapters: Composites; Micro/Nano Materials; Iron and Steel; Ceramics; Metal Alloy Materials; Biomaterials; Elastomers and Polymers; Optical/Electronic/Magnetic Materials; New Functional Materials; Building Materials; New Energy Materials; Environmental Friendly Materials; Structural Materials and Biomaterials; Chemical Materials.

目次

Preface and Organizing Committees Chapter 1: Composites Mechanical Behaviors of Sic Particle Reinforced Al Matrix Composites: A Study Based on Finite Element Method Preparation and Properties of Cf-TiB2-Cu-Graphite Composites Microstructure and Mechanical Properties of In Situ TiB2/6061 Composites Effect of High-Energy Ball Milling to Powders on Microstructure and Physical Properties of Al-50Si Alloy The Influence of Nonlinear Matrix on Mechanical Behavior of Polymer Particulate Composite Study on Biomimetic Composites by Imitating Shell Structure Preparation and Electrochemical Properties of Amorphous Tin-Copper Composite Oxide CuSnO3 First Principles Study on the Electronic Properties of Cr, Fe, Mn and Ni Doped -Ga2O3 Rapid In Situ Reactive Sintering and Properties of ZrO2-ZrW2O8 Composites Influence of LiCl Flux on the Process of In Situ Fabrication Aluminum Matrix Composites Effects of Different Factors on Antibacterial Properties of Crosslinked Chitosan-Coated Ag-Loading Nano-SiO2 Composites Piezoelectric, Dielectric and Pyroelectric Property in Morphotropic Phase Boundary MnO2 Doped Bi0.5(Na0.82K0.18)0.5TiO3/P(VDF-TrFE) 0-3 Composites Field Emission of Gallium-Doped Carbon Nanotubes Study on the Polyethyleneglycol-Based Silicon Wafer Wire Cutting Fluid for its Stability Improvement Experiment Study on Effects of Critical Factors on Quality of Prototypes in Fused Deposition Modeling Research on the Structure and Friction Properties of the SiC Particles Reinforced Copper-Based Self-Lubricating Composites Abrasive Wear Characteristics of In Situ TiC-Reinforced Iron Matrix Surface Gradient Composites Ultrafine W-Cu Composite Powder Research Progress Reservoir Fracture Characteristics and its Influence on Oilfield Development in Chang 4+5 Formation in Southern Puziwan Area The Non-Isothermal Crystallization Kinetics of Dispersible Nano-SiO2/PA66 Composites Mechanical and Thermal Properties of Reactable Nano-SiO2/polyoxymethylene Composites Effects of Particle Volume Fraction on Dynamic Deformation Behaviors of B4C Reinforced Aluminum Matrix Composites Synthesis of Magnetic Fe3O4@TiO2 Nanocomposite and its Photocatalytic Property Ballistic Impact Testing and Analysis of Triaxial Braided Composite Fan Case Material Fabrication of Si3N4 Reinforced 316L Stainless Steel Composites by Powder Injection Moulding Density, Microstructure and Mechanical Property of Large-Scale C/C Composites Prepared by Thermal Gradient CVI The Tribological Properties of Several PTFE Based Self-Lubricating Composites in Vacuum Preparation of Polyaniline/SiO2 Composites by Modified Silica Using Succinic Acid The Effects of Oil Palm Fruit Bunch (OPFB) Fiber and Coupling Agent Loadings on the Performance of Hybrid Composites The Preparation and Properties of MgO-CaO-ZrO2 System Composite Materials Preparation and Properties of Ce-Zr-Mn Composite Oxide Oxygen-Storage Materials Influence of Sintering Temperature and Atmosphere on Phase Makeup of SiAlON-Graphite Composites The Energy Absorption of Carbon Fiber Reinforced Polymer under Different Impact Speed Synthesis of Carbon Nanofiber-Titania-Cordierite Monolith Composite and its Application as Catalyst Support on Citral Hydrogenation Securing Superior Properties of Composite (PP+WF) through Central Composite Design Preparation and Research on Performance of Fluorine Rubber/Metal Composite Sealing Boards Collision Ansysis of Sandwiched Polyurethane Composite Steel Tube Microwave Absorbing Properties of MnO2/Ni-Zn Ferrite/Graphite Structural Composite Microstructure and Corrosion Resistance of In Situ Al0.983Cr0.017/Al Composites Damping Properties of Cups-Stacked Carbon Nanotubes (CSCNTs)/RTM6 Composites Theoretical Study of the Electronic Structures of Li-Doped ZnO Preparation and Photocatalytic Activity of TiO2/FeOOH Nanocomposite Tensile Properties on Single-Bar Modified Tricot Fabric Reinforced Composites Study on Microstructure Characterization of SiCp/Al Composites The Effect of Heat Treatment on the Microstructure and Mechanical Properties of Multilayered Composites Welded by Explosion Studies on the Thermal Conductivity of Al2O3/Epoxy Resin Composite Materials Production of Thermal Insulation Composite Material Based on Polymers Isothermal Crystallization Kinetics of Poly(phenylene Sulfide)/ZnO Composites Investigation on Rapid Prediction of Elastic Properties for Woven Fabric Composites Chapter 2: Micro/Nano Materials Preparation and Characterization of Regenerated Nanocomposite Made from Bacterial Cellulose/PMMA Effect of the Addition of Nano- -TCP on the Microstructure of Mg-Zn-Zr Alloy Synthesis, Characterization and Photocatalytic Properties of CdS Nanorods Study of the Nano Material Using Diisopropylamine as Replacing Solvent Preparation and Application of Core-Shell PMMA/Chitosan Nanoparticle Catalytic Thermal Decomposition of Ammonium Perchlorate Using Cu/Cr Hydrotalcite Derived Nanocomposite Oxides A Simple Method for Controlling the Morphology of CuO Nanostructures by Droplet Mesoporous Nano Carbon Sorbents for Separating Different Biomolecules Selenium Nanoparticles Synthesized via a Facile Hydrothermal Method Synthesis and Characterization of Co-Ce Codoped TiO2/SiO2/NiFe2O4 Magnetic Mesoporous Microspheres Synthesis of Spherical SrCO3 Powders by Ultrasonic Waves Preparation and Luminescence Property of Multi-Walled Carbon Nanotubes/Europium Doped Yttria Oxide Hybrids Investigation on the Large-Scale Synthesis of PbSe Nanocrystals Rapid Solvent-Free Melting Synthesis of Tungsten Nitrides with Lamellar, Solid Spherical Nanostructures at a Low Temperature The Analysis of Noises of Flows across the Superhydrophobic Surfaces with Microscale Structures Study and Application of Nanomaterials in Drilling Fluids Preparation of CuS Hollow Microsphere by a Simple Hydrothermal Method and its Catalytic Property Fabrication of Poly Phosphoric Acid into Polyacrilonitrile Composite Nanofibers Adsorptive Removal of Rhodamine B from Aqueous Solutions by Carbonaceous Microspheres Energy Band Calculation of Spiral Single-Walled Carbon Nanotubes Synthesis of MoO3 Nanostructures and their Photocatalytic Properties Synthesis and Optimum of Silver Selenide Nanopowder via Room Temperature Conversion Method The Effect of Strain Rate on the Tensile Behavior of Electrodeposited Nanocrystalline Ni-Co Alloy Synthesis of Magnesium Oxychloride Nanowhisker by Microemulsion Method Formation of Cylindrical Nanoholes in Heavily Doped P-Type Si(100) Substrate via Pt Nanoparticles-Assisted Chemical Etching Synthesis of Highly Ordered Silver Nanowire Arrays with SERS Activity Solvent Mediated Structure Control of Hierarchical CoS Nanostructures Formation and Structural Characterization of Novel K2Ti6O13 Nanobelts Preparation of ZnO Nanostructures and their Self-Assembly The Preparation of Silver Nanowires and the Study of SERS Activity of Single Nanowire Study of Degradation Function by the Composition of Nano Bi2WO6 and Graphine Morphology Modulated Preparation of PbWO4 Nano- and Macrostructures Research on Preparation of Nanocomposite Antibacterial Agent Study on Precursor Preparation of Co3O4 Nanometer Particle and its Thermal Decomposition Preparation and Properties of Nanocomposites Containing FGF-2, other Related Dressings and the Primary Animal Tests Hydrothermal Synthesis of 3-Dimensional Flower-Like Y2O3:Eu3+ Microstructures and the Luminescence Properties Synthesis of Fluorinated Silica Nanoparticles and the Wetting Prevention Ability Preparation and Application of Microencapsulated Flame Retardant Containing Phosphorus-Silicon The Study on Tribological Properties of the Nanoparticles Additives in Lubricant Electrooxidation for Methanol on Pd Nanoparticles Modified Electrodes in Alkaline Medium Effect of Zinc Substitution on Microstructure and Antibacterial Properties of Cobalt Ferrite Nanopowders Synthesized by Sol-Gel Methods Fragrance and Flavor Microencapsulation Technology Preparation of Au@Ag Core-Shell Nanorods and Investigation of its Surface Plasmon Surface Morphology and Texture of Nickel Crystal Micro-Casting by Electroforming under Magnetic Field DNA/AuNP Fluorescent Detecting Nano-Device Reaction Mechanism Study on Combustion of Micro Nanometer Iron Powder Field Emission Properties of the Single-Wall Carbon Nanotubes Synthesized by Arc-Discharge Method Synthesis of BaMoO4 Nanocrystallites Using Sol-Gel Process Study on Stabilized of Poly(Vinyl Alcohol) Nanofibers Based Sandwich Structure Purification Material Photoluminescence Properties of -SiC Nanoparticles by Electric-Pulses Discharge in Liquid-Phase Compound Heteroe-Pitaxial Growth and Optical Properties of SnO2 Nanowires on ZnS Nanobelts Functions of Cotton Yield Response to Soil Salinity in Akesu River Irrigation District A New Type Battery Equalization Circuit of Electric Vehicle Synthesis and Electrochemical Properties of KMn8O16 Nanorods Portrait of China's R&D Activities in Nano-Science and Nanotechnology in Bibliometric Study Chapter 3: Iron and Steel Study of Adhesion in Steels Surface Hardened Study on the Flow Stress Curve of the Warm Deformation of Medium Carbon Steel Preparation of Paclitaxel-Loaded Microspheres with Fe3O4 Nanoparticles and Study of their Target-Orientation and Sustained-Release Property Effect of Cooling Rate on Microstructures and Mechanical Properties of X80 Pipeline Steel State Analysis on Reactor Furnace Pipe Used over a Design Cycle Production of as-Cast High Strength Toughness Ductile Iron Influence of Tin on Properties and Corrosion Behavior of Q125 Grade Tube Used in Deep Well Effect of Ferrite Grain Size on the Yield-Strength Ratio of Low-Carbon Alloy Steel The Effect of Nb on the Microstructures and Hardness of Quenching-Partitioning-Tempering Medium Carbon Steels Iron Ore Sintering Process Based on Alternative Gaseous Fuels from Steelworks Fracture of High Carbon Microalloyed Steel Bars Used for Fracture Splitting Con-Rods Study on Bimetal Compound Casting Technology of Hammers Effect of Nitrogen on the Mechanical Properties of Heat-Resisting Steel The Impact on Pellets Quality by Semi-Self-Fluxing Iron Powder Stability of Reversed Austenite in 9Ni Steel Modeling and Optimizing Rolling and Cooling Processing-Parameters for C-Mn-Si Economical Dual Phase Steel Produced on CSP Effect of Annealing Time on the Microstructure and Texture of Interstitial Free Steel The Microstructure and Characteristic of 410L Stainless Honeycombs Fabricated by Extruding and Sintering Effect of Tempering Temperature on the Microstructure and Mechanical Properties of a 0.1C Steel with High Strength and Low Yield Ratio Influence of Austenite Grain Size on the Crystallography of Allotriomorphic Ferrite in a Low Carbon Steel Cleanliness Evaluation for 55SiMnMo Steels Produced by EAF LF VD Billet Casting Process Effects of Normalizing Annealing on the Recrystallization Texture of 4.2wt.%Si Non-Oriented Electrical Steel Thin Sheets Study of the Ti-Mn-Al-Si-O-S Complex Inclusions Inducing Intragranular Acicular Ferrite Influence of Vanadium on Microstructures and Mechanical Properties of High Strength Normalized Steel Effect of Strain Rate on Nb(C,N) Precipitation in Micro Alloy Steel Slab High-Strain-Rate Superplasticity of Big Grains in Spray Forming Ultrahigh Carbon Steel Contain 1.6wt.%Al(UHCS-1.6Al) Research of the DWTT Fracture of X70 Pipeline Steel Effect of Boron Mud on Melting Temperature of CaO-Based Steelmaking Slag Shield Performance of High Boron Alloyed Stainless Steel Composite Plate The Tempering on Microstructure and the Yield-to-Tensile Ratio of High Performance Steels Comparisons of Laser Cut and Water Cut for Silicon Steel Plate Effect of Rare Earth on Inclusions and Impact Property of Ferrite Stainless Steel The Morphology and Content of Ferrite in Non-Equilibrium Solidified 0Cr18Ni9 Austenitic Stainless Steel Microstructures, Mechanical Properties and Textures of Deep Drawing Dual-Phase Steel Creep-Fatigue Interaction Life Prediction for P91 Steel Based on Improved Elman Neural Network Model The Recrystallization Behavior Study of 3%Si Nonoriented Electrical Steel Formation of the {111}<112> and {111}<110> Recrystallization Texture in Deep Drawing Low Carbon Steel Effect of Stabilizing Heat Treatment on Intergranular Corrosion Resistance of Welded Stainless Steel AISI 321 Study on Roll Wear Model for Hot Strip Mill Corrosion Behavior Analysis of Various Ions in the Soil to the X80 Buried Pipeline Research on Micro Inclusions of SS400 Steel in Slag Washing Process Development on a New Interstitial-Free Steel with r 0.3 Effect of Alloying Elements Ti and Nb on Microstructure and Performance of 3.5Ni Steel Experimental Research on Sintering Amorphous Based Material with Iron-Tailings Effects of Composite Nickel-Base Boracic Brazing Filler on the Boride near the Brazing Seam of 316L Stainless Steel Microstructure Transformation of Continuous Cooling of Nb-Ti Micro-Alloyed Low Alloy Steel Effect of Titanium on Microstructure and Phase Composition of High Boron Alloyed Stainless Steel Experimental Research on Mineral Processing Technique of a Brazilian Specularite Experimental Research on the Iron Separation from an Ultra Poor Iron Ore Preparation, Decomposition and Characterizations of Bangka - Indonesia Ilmenite (FeTiO3) Derived by Hydrothermal Method Using Concentrated NaOH Solution The Effect of Cold Asynchronous Rolling Technique on High Manganese Steel Mn13 Effects of RE on Critical Cooling Rate of Bearing-B Steel The Effects of the Sputter-Etching Parameters on the Formation of Conical Protrusions on the Surface of SUS304 Stainless Steel Study on Microstructures and Properties of 22Mn2SiVBS Steel on Different Cooling Rate Primary Recrystallization Texture in Rolled (Fe81Ga19)99B1 Sheet Chapter 4: Ceramic The Application of SunyPCC800 in CFB Boilers Effect of Ta, Nb and V Additions on the Microstructure and Mechanical Properties of (W,Ti)C-Co The Properties of YSZ-Ni-Cr Cermet Fabricated by Sol-Gel Method Study of Nb-Zn-Mn Co-Doped Ba(Ti,Zr)O3 Ceramics A Rational Way to Prepare BaTiO3 Ceramics Fabrication and Effects of Different Average Grain Sizes on Thermal Conductivity of Nd:YAG Ceramics Effect of Glass Additions on Ca[(Li1/3Nb2/3)0.92Zr0.08]O3 Microwave Ceramics Effect of Roasting Process on the Properties of Alumina-Based Ceramic Core Microstructure and Toughening Mechanism of ZrO2 Ceramic Effect of Different Nucleating Agents on the Microstructure and Properties of LMAS Glass-Ceramics The Influence of Al2O3-AlN Compound Additive on the Crystallization Characteristics and Properties of Fused Quartz Ceramic Materials Study on Preparation and Property of Woodceramics Microwave Dielectric Properties of Low-Temperature Sintered Ca[(Li1/3Nb2/3)0.95Zr0.05]O3 0.04TiO2 Ceramics Effect of MgO on the Microstructure of Polycrystalline Nd:YAG Ceramics and its Action Mechanism Influence of CeO2 and Sintering Parameters on the Performance of Vitrified Bond Diamond Abrasive Method of Improving Dielectric Properties of AlN Ceramic Preparation and Application of Magnesium (II) 2,2,2-Trifluoroacetate as an Efficient Catalyst for the Catalytic Preparation of 1-Amidoalkyl-2-Naphthol Derivatives Preparation and Characterization of SrO-Fe2O3-FeO-SiO2-B2O3 System Hexaferrites Glass-Ceramics Synthesis of CaO-Na2O-Fe2O3-FeO-B2O3-SiO2 Glass-Ceramics for Hyperthermia Application by Aqueous Solution-Melt Method Chapter 5: Metal Alloy Materials Analysis of Copper and Copper Alloys Electric Components Short Circuited Melted Mark Metallographic Structure Study on the AZ31B Magnesium Alloy in the Application on High-Speed Trains Chapter 5: Metal Alloy Materials Effect of Cr and Ni Contents on Microstructure and Properties of High Boron Stainless Steel Composite Plate Microstructural Evolution of the [001] Oriented Single Crystal Superalloy DD6 Creep at 760 DegreesC and 785 MPa Supercapacitor Fabrication by Titanium Alloy Study on the Quenching Microstructure of Fe-0.36C-1.4B Alloy Ageing Precipitation and Strengthening Behavior of the Spray Formed Al-Zn-Mg-Cu Alloy The Microstructure and Mechanical Properties of Super-High Strength Al Alloys by Spray Forming Research on a New Type Grain Refiner Refining -Al by Adding Molten State and Diluted Al-Ti-B-RE Master Alloy Effects of Ni/Ti Ratio and Heat-Treatment on Transformation Temperature, Mechanical Properties and Shape Recovery Strain of Ni-Ti-Nb Alloy Effect of Rolling Deformation to Microstructure and Properties of Mg-8.5Li-1Al-1Ce Alloy Fatigue Behavior of GH4169 Alloy up to Very High Cycles Effect of Ti Content on Microstructure and Hardness of A356 Alloy Fractal Characteristics of Primary Phase Morphology in Semisolid A356 Alloy The Effect of Cold-Drawing on Recovery Stress of Ni-Ti-Nb Shape Memory Alloy Study on the Mechanical Property and Microstructure of Surgical Implanted Ti-6Al-7Nb Titanium Alloy Influence of Gd Addition on the Structure and Capability of Ni-Mn-In Metamagnetic Shape Memory Alloys Effects on the as-Cast Structure of 7075 Aluminum Alloy by Treating with Electrical Pulse Inoculation Adjusting Microstructure and Magnetic Properties of Ni-Mn-In Metamagnetic Shape Memory Alloys by Addition of Gd Some Studies on Preparation of Large Spray Deposited Aluminium Alloy Tube Preform Study on Cyclic Load Creep Test of the Nickel-Based Super Alloy K403 Study on Present Situation and New Trends of the Electrodeposition of Nickel-Cobalt Alloy Thermal Flow Deformation Behavior and Mechanism of As-Cast and As-Extruded Burn Resistant Titanium Alloy Experimental Study on the Mineral Processing of a Certain Low Grade Copper-Molybdenum Ore in Xinjiang The Influence of Composition on the Material Structure and Performance of 3104 Aluminum-Alloy Canbody Material Influence of Titanium Alloying Element Substrata on Bacterial Adhesion Effect of KBF4 Addition on the Microstructure of Mg-6Zn-1Si Alloy Site Preference and Elastic Properties of 3d Transition Metals Alloying Addition in Ductility YAg Alloys Bending Properties of AA7055 Aluminum Alloy Reinforced with In Situ TiB2 Particles The Influence of Ni on the Microstructure of Co-Base ODS Alloys Atomistic Simulation for the Site Preference of Tb3(Fe28-XCoX)V1.0 Compounds Formation Mechanism of Low Angle Boundary of DD6 Single Crystal Superalloy Blades Investigation on Dislocation Network in Al-5.8Cu Aluminum Alloy Impacted Plate A Study on Influence of Annealing and Aging on High Temperature Internal Friction in Al-Zr Alloy Study of Crystal Structural about La2/3(Ca(1-X)ZnX)1/3MnO3 Precise Re-Os Dating of Molybdenite from the Northern Dabie Molybdenum Belt in Central China and its Geodynamic Implications Chapter 6: Biomaterials Synthesis and Structure Determination of Carbonized Nano Mesoporous Materials Based on Vegetable Raw Materials Comparative Analysis of Bacterial Diversity for Cutlassfish (Trichiurus haumela) during Cold Storage by the Culture-Dependent and Culture-Independent Methods Effect of Modified Atmosphere with Varying O2 Concentrations on the Quality of Packed Pacific White Shrimp (Penaeus vannamei) during Cold Storage Preparation of High Water Absorption and Retention Material by Graft Copolymerization of Calcium Lignin Sulphonate with Acrylic Acid and Acrylamide Research on Viscoelasticity and its Influence Factors of Polymer Solution Structure of Patinopecten Yessoensis Shell is a Biomimetic Example of Composite How to Strengthen the Sense of Solid Wood of Frame-Board Type Furniture Using RAFT Polymerization to Synthesize Potential Drug/Gene Delivery System Rheological Property and Miscibility of Lignin-Based LDPE/EVA Blends with Compatibilizer Synthesis of Graft Copolymer by Using Acrylamide and Methacryloyl Chloride Guar Gum and its Adsorption Behavior to Metal Ions Synthesis and Characterization of Poly Phenoxyl Bisphenol-S Phosphate Fabrication and Characterization of Poly L-Lactic Acid/Modified Nano-Hydroxyapatite Composite Fibrous Scaffold Dissolution of Cellulose in [Amim]Cl/Lithium Salts Solvents System Research Progress on Tissue Engineering of Neural Stem Cells Effects of Calcination upon Properties of Needle-Cokes Analysis for Stress-Strain Curve during Stretching Coarse Yak Hair with Different Pretreating Condition Study on the Variety Identification Method of Bast Fibers Mechanical and Thermodynamic Properties of Chlorophyll-a Surfactants at Air-Water Interface Study on Multi-Elements in Traditional Chinese Medicines Ophiopogon japonicus and Lotus Seeds by the ICP-AES with Microwave Digestion Chapter 7: Elastomers & Polymers Study and Application on Layered Polymer Injection with Concentric String Effect of Hyperbranched Polymer on Crystallization Kinetics of Isotactic Polypropylene Effect of Process Parameters on Jet Length in Electrospraying of Thermoplastic Polymer Preparation of Rigid Flame Retardancy Polyurethane Foam Material with Difficult Combusted Degree Properties of High Solid Content UV Curable Waterborne Polyurethane Dispersions with Different C=C Content The Reaserch of Displacement Oil of the Polymer System with the Low Interfacial Tension Conditions Evaluation of the Thermal Stabilization Effect of Maleic Anhydride Derivatives on Polyvinyl Chloride Synthesis of Hydrophobic Modified Polyacrylamide Functional Materials in Supercritical CO2 Discussion upon the Draft Ratio Affecting PEN-PPS Filaments Research on Corrosion and Scale Inhibition Performance of HEDP Synthesis and Phase Behavior of Polysiloxane Nematic Liquid Crystal Elastomers Shear Studies on Polymer Flooding Systems with High Concentrations Preparation and Characterization of Elastomers Based on Polydimethylsiloxane/Poly(methyl methacrylate) Blends Analysis and Prediction of Damping Properties of Multi-Layered Organic Hybrid Materials Consisting of Polarized Polymers and Small Molecules Characterization and Modification of Nitrile Rubber in the Transformer Oil Capacitance Fading Induced by Degradation of Polyaniline: Cyclic Voltammetry and SEM Study The Research of EVA to PLA/E-AA-GMA Blend Materials Toughening Effect of CMCS on Vulcanization Kinetics of Natural Rubber Influence of Chiral Maltose on the Mesomorphic Properties of Main-Chain Liquid-Crystalline Polymers Manufacturing of Porous Biomaterials for Dental Implant Applications through Selective Laser Melting Chapter 8: Optical/Electronic/Magnetic Materials Magnetism Study of Spin Correlations in Bi0.5Ca0.5MnO3 Synthesis and Fluorescence Property of Novel Zn2+ Schiff Base Complex Oxygen Content Change Characters and the Influence Superconductivity in the Doped YBCO Systems Research on Two-Stage Three-Phase Photovoltaic Grid-Connected System Recent Progress in Developing Magnetic Properties of Mn-Doped ZnO Diluted Magnetic Semiconductors Study on the Crystal Size of PCBM in Organic Photovoltaic Cells Electrogenerated Chemiluminescence and Sensory Property of Rubrene Microparticles Immobilized on ITO Electrode The Two-Photon Excited Fluorescence of Pyrazine Derivatives The Optical and Structural Properties of InxGa1-XN/GaN Multiple Quantum Wells by Metal Organic Chemical Vapor Deposition Study on Ultrasonic Electroforming Ni-P Coatings on NdFeB Permanent Magnet Upconversion Luminescence Property of Nanocrystalline Y2O3:Pr3+,Yb 3+ The Effect of Environment on Photovoltaic Module Efficiency Theoretical Study on Electronic Structures and Spectroscopic Properties of Indene-C60 Monoadduct (ICMA) An Investigation of Half-Metallic Ferromagnets Behavior in Hg2CuTi-Type Heusler Alloy Ti2FeAl by Using GGA Effect of Nb Doping on Electronic and Magnetic Properties of Heusler Alloy Ti2NiAl with Hg2CuTi-Type Structure Temperature Dependent Characteristics of 1D Photonic Crystal with Defects A New Design of Photonic Crystal Fiber with Fattened Dispersion and Low Effective Mode Area Research on the Relationship between the Spray Overlap Width and the Photoresist Film Thickness and Uniformity Research on Composite Powder and Magnet Properties of Bonded NdFeB Magnets Giant Magnetoresistance in (Ni60Co30Fe10/Cu) Trilayer Growth by Opposed Target Magnetron Sputtering Synthesis and Characters of Fe3O4/AMPS Magnetic Composite Material Synthesis and Luminescence Property of Poly(phenylenevinylene) with Alkoxyl Substituents under the Ultrasonic Irradiation Optimization of the Two Parameters of Classical Blaze Grating in Littrow Mount A Study on Gadolinium Sensitized Chemiluminescence System Influence of Gd3+ Doping Quantity on Magnetic Performance of Co2Z Hexaferrite Ascertainment of the Figure of Merit for the State-of-the-Art Thermoelectric Materials via Temperature Current-Voltage Characterization on Au-DNA-Au Junctions under the Influence of Magnetic Field The Application of Symmetrical Equation of Diffracted Wavevectors in Integral Theory of Gratings Two-Photon Luminescence in Yb:YAG Chapter 9: New Functional Materials The Research Progress of Embedded Solid Lubricant Materials New Luminescent Mesoporous Material Covalent Bonded with Europium (III) Organic/Inorganic/Polymeric Hybrid The Research on Wear Resistant Polyurethane Hose Capable of Being Flat Functionally Graded Plates under Thermal and Moisture Effects Synthesis and Properties of Acrylate Modified Waterborne Polyurethane Emulsion Study on Release of Anion Concentration about Negative Oxygen Ions Fabric Using Paper as Reinforcement in Silty Sand Effect of Multi-Material Substitutions on Static and Dynamic Properties of Electric Vehicles Influence of Construction of Textile Material on Performance of Warp Sizing Non-Isothermal Crystallization Behavior of Poly(trimethylene Terephthalate-Co-Isophthalate) Copolyesters Facile Synthesis of near-Infrared-Emitting Water-Dispersed CdHgTe/CdS/ZnS Core/Shell/Shell Quantum Dots Study on the Fiber Bending Deformation during Knitting Process Comparative Research of the Sizing Performance of the Compact Spun-Yarn and Ring Spun-Yarn Sound Insulation Property of Warp Knitted Fabrics Tensile Property Test Analysis of Double Protein Modified Fiber Creation Based on Superhydrophobic Soot Waterproofing Materials Obtained in Flames Synthesis of Novel Separation Materials Based on Molecular Imprinting Technology Characterization of Indium-Doped CdZnTe Crystal Grown under Te-Rich Conditions Physical Chemistry of Fermentative Hydrogen Production Mechanism A Geometric Analysis of the Loop Form of a Tricot Stitch Knitted Fabric Analysis of the Influence of Static Flow Resistance on the Sound Absorption Properties of Aluminum Foam Application of the KH560 on Improving the Interface Fastness of Composites of Starch and Cotton Fiber Reduced Graphene Oxide Nanosheets Functionalized with Bile Salts as Support for Electrochemical Catalysts Study on the Supercritical CO2 Art of Dyeing The Dynamics and Governance of Tongxiang Sweater Cluster Based on GVC The Study on Properties of Kapok Nonwoven Material Photocatalytic Degradation of Nanometer TiO2 Sol Composed Fabric to Dye Synthesis and Photophysical Characterization of Dendritic 8-Hydroxyquinoline Complexes Preparation and Characterization of the Hydrophilic Copolyester Study on the Wool-Solospun Spinning Technology The Influence of Electrode Materials on the Electrical Degradation Process of Lead Zirconate Titanate under Harsh Operating Environment Biomimetic Synthesis of Prismatic Calcite Mesocrystals in the Presence of Nonionic Copolymer Synthesis and Characterization of Polyacrylates Side-Chain Liquid Crystalline Polymer via Atom Transfer Radical Polymerization Synthesis and Spectral Properties of Polymeric Dye from Waste Plastic A High-Throughput Screening of N-Carbobenzoxy-L-Tryptophan Imprinted Polymers and their Application for Monolithic Chiral Stationary Phase The Study on Nano-Silica Modified Phenolic Resin Used as the Magnesite-Carbon Brick Binder Wound Dressing Utilising Nonwoven Wool Matrix Numerical Simulation for the Optimization of the Angle of the Velocity of the Hydrogen in the High Performance Hydrogen Bell-Type Annealers Researches on the Fixation Performance of Chitosan and its Derivative DFT Study on Structures, Stabilities and Electronic Properties of Tert-Butyl Silsesquioxanes Si2nO3n(CMe3)2n (n=1-6) Elastic Modulus of Rhombus Dodecahedron Closed-Cell Cellular Materials 4.9tex x 2 Cotton / Pearl 65/35 High Count Blended Yarn Spinning Process Design Optimization of Separation Process of Waste Polyester-Cotton Fiber by Using Response Surface Analysis The Antistatic Research of Polyester/Nylon Fabrics Finished by Triblock Copolymer Containing Organic Silicon Research on Open-Cell Rigid Polyurethane Foam as Vacuum Insulated Panel Core Effect of Laundering Temperature on the Color of Brown Naturally Colored Cotton Influence of Fractal Structure on Light Absorption of down Fiber Assembly Study of the Hydrophobic Modification of Chromium Sesquioxide with Lauric Acid Preparation and Characterization of Ternary Composite Composed by Chitosan, Porphyrin Derivative and Single-Walled Carbon Nanotubes (SWCNTs) Fuel Cell Electric Vehicle Energy Management Strategy Simulation Study Adsorption of Cu (II) from Aqueous Single Metal Solutions by Bagasse Pith Chemically Modified with EDTA Dianhydride (EDTAD) The Investigation of Dyeing Properties of Anion Modified Linen Fibers Influence of Heat Insulation Material on Thermal Stress of Long Nozzle Synthesis and Luminescence Characteristics of Mg (II) Complexes with 5-Bromosalicyladehyde-Nicotinoylhydrazone Effects of BaF2 Addition on Properties of Strontium Barium Niobate Based Glass-Ceramics for Energy Storage Capacitors Different Natural Season Weathering of B.mori Silk Fabric Study on Crystallization Kinetics of Li2O-Al2O3-TiO2-P2O5 Glass by Non-Isothermal Technique Biological Performances of Titanium Scaffolds: A Review Chapter 10: Building Materials Study on Coal Roadway Supporting Parameters of Broken Thick Top-Coal Large Section Simulation on NOx Generation of RSP Calciner for Cement Production Research on Perfomance of Vulcanized Eucommia Ulmoides Gum Blending with Asphalt Experimental Research on Strengthen Mechanism of NaOH on Light Wall Materials Prepared from Crushed Brick Powder The Performance Study of the Open Channel Concrete in Cold Area Research Progress of Energy Conservation Architectural Coatings Influence of Nano-Clay on the Performance of phosphoaluminate cement The Study on the Application of Material Media in the Modern Decorative Art Properties Research on Chiral Liquid Crystalline Polysiloxanes Containing Chiral and Electron Withdrawing Group Study on Full-Slag Concrete Feasibility The Effect of Asphalt Binder Aging on Fatigue Performance of Evotherm WMA Experimental Research on Durability of Fair-Faced Concrete Experimental Study of the Characteristics of Damp and Efflorescence Mechanism for Building Brick Flexural Behavior of near Surface Mounted CFRP Bars Strengthened Reinforced Concrete Beams Study on Water-Rock Interaction in Sea and Freshwater Transitional Zone Research on Aging Properties of Tourmaline Modified Asphalt Effect of Gradation and Cement on the Properties of Soil-Cement Mixtures Properties Improvement of Fired Clay Bricks Incorporating with Cigarette Butts Investigation of Road Performance and Colloidal Structure of Tourmaline Modified Asphalt Dry Shrinkage and Compressive Strength of Blended Cement Pastes with Fly Ash and Silica Fume Chapter 10: Building Materials The Application of the Deep Carbonized Woods to Building Skins Mechanical Analysis and Numerical Simulation of Steel-Ring and Rigid-Frame Restrained Concrete Experimental Study on Rock Breaking with Impacting Water Jet by Modulation of Chaos Experiment Study of Influence Factors on High-Temperature Stability of Closely Gap-Graded Bituminous Mixture Research on the Adobe Wall of Traditional Civil Structure Dwelling in Tianshui & Guanzhong Experiment Study of Reclaimed Asphalt Pavement Gradation Fluctuation on Influence of Central Plant Hot Recycled Mixture Performance Preliminary Study about the Sediment Carrying Capacity Formula Three-Dimensional Sediment Numerical Simulation of Wenzhou Oufei Tidal Flat Sea Area Experimental Research on Dynamics Characteristics and Damage of ALC Wallboard Service Life Prediction of Reactive Powder Concrete due to Seawater Infiltration Influence of Air Content on the Compressive Strength of Concrete Analysis and Evaluation for Longxihe Dangerous Rock Stability A Method Based on Neural Network for Risk Prediction of the Typical Moraine-Dammed Lake Outburst in the Himalayan Region Laboratory Fast Corrosion Test of Plain Steel Bars in Concrete Beams Study on Compaction Characteristics of Solidified Mud with Different Proportion of Curing Agent A Homogenisation Procedure for the Steady State Periodic Forced Response of Laminated Composite Beams at Large Vibration Amplitudes Production of Bitumens from Coal Sources Modified by Elementary Sulfur Research on the Influences of the Molding Processes of TOR Asphalt Rubber Mixtures upon the Pavement Performance Review of Researches on Carbonization of Concrete: Influencing Factors and Forecast Models Study on the Rule of Temperature Descent for Large Stone Asphalt Mixtures Kyanite Ore Beneficiation Experimental Research in Hebei Performance and Mechanism Study on C50 Micro-Expansion Polypropylene Fiber Reinforced Anti-Cracking Pumping Concrete Study on the Factors Affecting the Anti-Seismic Performance of Steel Reinforced High-Strengh Concrete Columns The Discussion of Iron Wire Fire Hazard Study on Influencing Factors and Control Measures of Diaphram Wall Panel Trench Research on Accelerated Corrosion of Steel Bar in Reinforced Concrete Components Problems and Solutions of High-Rise Buildings in Coupling Beam Design Using New-Type Composite Silicate Heat-Insulation Material to Improve Residential Energy Efficiency in Regions of Cold Winter and Hot Summer Evaluation of the Strain-Softening Law of Concrete from the Fracture Test Study of the Effect of Boron Carbide Content in Concrete as Radiation Shielding Application Mechanical Properties of Rocks Used for the Construction of Vehicular Bridges Supported by Pier Masonry The Study of Using Fly Ash to Produce Ultra High Performance Fibre Reinforced Concrete Observation about Architecture Skin Using New Material Contrastive Study on Mineralogy of Brazil Kaolinite and Beihai Kaolinite Fly-Ash Usage in New Cement-Based Material for Concrete Waterproofing An Experimental Study on Ductility of Fiber-Strengthening Concrete On Performance & Application Prospect of Inorganic Materials Used for Exterior Walls Insulation in Hot Summer and Cold Winter Zone Experimental Study on Flexural Behaviors of All-Lightweight Aggregate Concrete Slabs Effect of Anisotropy on Shear Wave Velocity in Wood Test on Corrosion Resistance of GFRP Anchor Bolt Experimental Study on Mix Design of Plastic Concret with Lower Elastic Modulus and Higher Impervious Coefficient Experimental Investigating of Latex Cement as Similar Material Simulating Soft Rock Creep Application of FLAC to Study on Anchorage for Mountain Slope Thermal Conductivity and Strength Properties of Soil-Based Lime Adobe Stabilized with Pottery Burnt Hull Ash Study and Application of a Modified Agent GHPC-1 for Green High-Performance Concrete Thermal Stress Numerical Simulation on Concrete Hydration Heat of Giant Floor in Deep Foundation Pit Effect of Polypropylene Fibers on the Toughness of Concrete Materials Structural Performance of Chinese Larch Plywood Development of a Fire Resistant Low Alloy Steel for Construction Division of Frost Damage Grades and its Prevention Measures in Tunnel The Engineering Technology Index Analysis of the Low-Carbon Building A Novel Hydrophobic-Induced Method for Water Soluble Silk Fibroin Finite-Element Analysis on Carbon Fiber Reinforced Polymer (CFRP) Plates Reinforcement for the Rigid Joints of Steel Structures The Matching of Flow Control and Structure Parameters for the Bitumen Foaming Technology Analysis of Structural Properties and Seismic Performance of a Temple Study on the Structural and Aseismatical Performance of Multi-Storey Ancient Chinese Timber Structure Shangyou Tower of Palace Style Overall Dynamic Analysis of K-Reticulated Shell Structure with BRB in Severe Earthquakes Research and Analysis to Find the Optimal Parameters to Reducingharmful Vibrations of the Inverted Pendulum System Seismic Analysis of Soil Nailed Wall Using Finite Element Method Practice and Theoretical Thought on the Supporting for Soft Rock Chapter 11: New Energy Materials Study of Micro-Inclusion of Beam Blanks Groove Resistance Simulation Analysis and Fault Detection of Aluminum Reduction Cell Research on Evaluation System of China's Energy Security Considering Energy Transportation A Single Ion Conducting Gel Polymer Electrolyte Based on Poly(lithium 2-Acrylamido-2-Methylpropanesulfonic Acid-Co-Vinyl Triethoxysilane) and its Electrochemical Properties Superconducting Magnetic Energy Storage Summarize Study on the Application of N,N'-1-Ethyl-4-Butyl, Triethylene and Diamine Hexafluorophosphate in Supercapacitors An Investigation of the Electrochemical Hydrogen Storage Performances of the RE-Mg-Ni-Based A2B7-Type Electrode Alloys Prepared by Melt Spinning The Influence of Interface Silicon Oxide Layer on Photovoltaic Effect of Iron-Doped Amorphous Carbon Film/SiO2/Si Based Heterostructure CdTe Solar Cells on Flexible Metallic Substrates Using Natural Dyes to Prepare Nanoporous TiO2 Dye-Sensitized Solar Cell Physical and Electrochemical Properties of a Mixed Lithium Phosphate as Cathode Material for Lithium Ion Battery Preparation of Zirconia-Yttrium Fibres from Steady Precursor by Sol-Gel Technique Summary of Lithium-Ion Battery Polymer Electrolytes Thermoelectric Power Generation System with Loop Thermosyphon and TiO2-Nanofluids Effect of Heat-Treatment on the Activity of Nickel Phthalocyanine Catalysts for Oxygen Reduction Reaction in Acid and Alkaline Electrolytes Catalytic Processing of Coal into Liquid Fuels: Mechanochemical Activation of Coal The Preparation and Characterization of a Novel Biodiesel Named Curcas Oil Diethylene Glycol Ether Ester A Survey of Nuclear and Solar Energy Chapter 12: Environmental Friendly Materials Preparation of Domestic Honeycomb Briquette from Corn Stover and Coal The Influence of Mechanochemical Treatment on the Acid and Catalytic Properties of Modified Natural Zeolite Polymermetallic Catalysts with Nano-Sized Particles on the Basis of the Palladium and the Potassium Humate The Analysis of Tianjin Subway Environmental Control System Effect of CeO2 Promoter on Catalytic Performance of CuO-ZnO-ZrO2/HZSM-5 Catalyst for Carbon Dioxide Hydrogenation into Dimethyl Ether Experimental Study on Synthesis of Adsorption Material of Porous Zeolite with Fly Ash Waste Paper Application in Geotechnical Project Experimental Study on Treatment Phenolic Wastewater by Polymerized Silicate Containing Aluminium Sulfate and Magnesium Sulfate A Free-Lead and Cadmium of Antimony Ruby Glass Composition and its Preparation Method Assessment of the Effects of Land Use Change in Upper Catchments of Lake Kivu on its Water Quality Optimization of Preparation Process of La-Ce-Palygorskite Catalysts for NO Decomposition by Response Surface Methodology Research on Corrugated Cardboard and its Application Polycarbonate from the Copolymerization of Carbon Dioxide with Epoxide Sol-Gel Preparation and Characterization of SiO2/TiO2 Composite Mesoporous Materials with Bacterial Cellulose for Photocatalysis of Methyl Orange Research Nanostructurized Carbon-Containing Catalysts on the onkeris Clay Base by Physico-Chemical Methods Preliminary Research on the Uptake Behavior of Ammonium Molybdophosphate for Cesium and the Corresponding Structural Transformation Study on the Defluorinated Materials of High Fluoride Study on Mechanism of Removing the Organic Matter in Heavy Oil Sewage by the Electric Flocculation Method Influence Factors and Kinetic Study on Photocatalytic Degradation of Rhodamine B by Fe-Doped TiO2/Diatomite Composite Estimating the Energy Carbon Footprint of Huangshan National Park Study on the Photocatalytic Degradation of Bisphenol a by La3+ Doping TiO2 under Sunshine Irradiation Preparation of Poly(vinyl Alcohol)(PVA)/peat/clay Composite Beads as Adsorbents for the Removal of Pb (II) and Zn(II) Ions from Aqueous Solutions Study on Preparation of Compound Activated Carbon Adsorbent and Effect of Thiophene Adsorption New Closed UV Sterilizer Application of Wastewater Treatment Progress in Modified MBR with TiO2 for Wastewater Reuse Preparation of Nanosized TiO2 Synthesized by Sol-Gel Pathway Using Ionic Liquid as Assistant and its Photocatalytic Activities The Purifying Capacity and Influential Factors of Wetland Soil to Phenol Fouling Removal Technology with Intermittent Rotation Spiral-Insert Catalytic Dechlorination of Para-Nitrochlorobenzne in Wastewater through a Nanoscale Nickel-Iron Bimetallic Catalyst R&D on Wollastonite of Advanced Materials and Low Carbon Products Study on Treatment of Waste Emulsion with Pulse-Electrolysis Chapter 13: Structural Materials and Biomaterials Correlation Analysis between Single Nucleotide Polymorphism of Fatty Acid Synthase and Fatness Traits in Chickens Study on Scale Inhibition Performance of Polyaspartic Acid Derivative Study the Biodegradation of a Injection Human-Like Collagen Hydrogel Synthesis and Characterization of Carboxymethyl Chitosan/Human-Like Collagen Hydrogel Study on the Bio-Composite from Sisal Fiber Reinforced Cellulose Acetate Preparation of Transglutaminase Cross-Linked Tilapia Scale Collagen Microspheres Containing L-Ascorbic Acid The High-Cell-Density Fermentation of Recombinant Escherichia coli Based on the Control System The Advantage of Automatic Control in Human-Like Collagen Production by Recombinant Escherichia coli BL21 Structure of Antheraea pernyi/Bombyx mori Silk Fibroin Scaffolds Sodium Alginate Extraction by Enzyme-Ultrasonic Combined Method Optimization of the Extraction of Coconut Protein and the Evaluation of Antioxidant and ACE Inhibitory Activities of its Enzymatic Hydrolysates Chemical Analysis and Antioxidant Activities In Vitro of Polysaccharide Extracted from Corn Silk Preparation and Electrospinning of Acidified-Oxidized Potato Starch Formation of Silkworm-Like Vaterite via Orientated Attachment Process Ionic Liquid-Regenerated Cellulose Beads as Solid Support Matrices for Papain Immobilization Producing Cellulase on Phanerochaete chrysosporium by Fermentation and Breeding by Induced Mutation of Cellulose-Degrading Phanerochaete chrysosporium Study on Biocompatibility of Post-Irradiated Silk Fibroin In Vitro Effect of Gamma Irradiation on the Biocompatibility and Biodegradation of Silk Fibroin In Vivo Cellulose/Collagen Beads Prepared Using Ionic Liquid for Cu(II) Adsorption from Aqueous Solutions The Surface Micro-Morphology Transition of Pearls Induced by Cerium Increased Dissolution of Lignocellulosic Biomass in Ionic Liquid 1-Butyl-3-Methylimidazolium Chloride at High Temperature Nanospheres Conjugated with Hab18 as Targeting Carriers for Antitumor Drug DBD Plasma Induced Mutation in Phosphate-Solubilizing Bacteria Acinetobacter CalcoaceticusYC-5a Effect of PEO on the Hydrophilicity of PLLA Ultrafine Fibers Build and Apply of Granular Sludge Enriched by Phosphorus Accumulating Organisms A Novel Method for Preparing the Surface Molecularly Imprinted Polymers to Target Isolate Ginsenoside Rg1 and its Analogues Antimicrobial Peptides from Musca Domestica Expressed in Escherichia coli Flexural Properties of Bio-Composite Made from Hydrothermally Treated Kenaf (Hibiscus cannabinus) Fibres Correlation Analysis between Single Nucleotide Polymorphism of the Lipoprotein Lipase and Fatness Traits in Chickens A Method for the Introduction of Acetylthiol Groups into Recombinant Human-Like Collagen Apoptosis of Human Leukemia Cell Line K562 Cells Induced by Hydroxycamptothecine Efficient Syntheses of 2-Chloro-2'-Deoxyadenosine (Cladribine) from 2-Chloroadenosine Study on the Photosynthetic Efficiency of the Michelia alba Leaves by Using Photo-Acoustic Tomography Spectroscopy Technology Effect of ADM on Proliferation and Apoptosis of Human Gastric Cancer Cell SGC-7901 Hydrolysis Kinetics of Cornstalk in Formic Acid Solution Hydrolysis of Bamboo Fiber for Production of Fermentable Sugars in Saturated Formic Acid Biosorption of Uranium by Deinococcus radiodurans Cells under Culture Conditions Electrodeposition of ZnO Nanosheet Structures and their Application for Glucose Biosensor Chapter 14: Chemical Materials Utilization of Scoria as PRB Reactive Media for the Removal of Petroleum Hydrocarbon from Groundwater Dilute Sulfuric Acid Pretreatment and Enzymatic Hydrolysis of Corn Stover into Fermentable Sugars Synthesis and Electroluminescent Property of Bis{2-(naphtha [3,4]imidazol-2-Yl) Pyridinato} Magnesium Hydrothermal Oxidation of Phenol with H2O2 The Stannous Complex of Succinimide as Multifuctional Additive for Lubricating Oils Preparation and Mechanism Analysis of High-Efficiency early Strength Agent A Novel Approach to Get Bisphenol-a Bis(Diphenyl phosphate) Synthesis and Properties of Silicone Modified Acrylate Emulsion Integrating Grey Relational Analysis with Combination Weighting for Selecting Bearing Material Applied Research of the Flexible Epoxy Resin Curing Agent Calculation Model of Activity for Slag System of CaO-SiO2-Fe2O3 Impaction of Graphite Type on Performance of Polycrystalline Diamond Powder A New Type of Compatilizer and its Application in Polystyrene Ether/Nylon 66 Alloy Research on the Rheological Properties of Domestic and International PPS Resin Effect of Applied Voltage on Polymer Aggregation in Electrospraying of Thermoplastic Polymer Study on the Characterization and Application of Poly-Silicate Magnesium Ferric Sulfate Borate (PFMSSB) First-Principles Investigation of ThO2 Study of Fibrous AlPO4-5 via Hydrothermal Conditions: Morphology Evolution and Growth Mechanism Synthesis, Characterized and Biological Activities of Chalcone Derivatives Dielectric Characteristics of Hydrated Paraffin Predicting Impact Sensitivity of Heterocyclic Nitroarenes from Molecular Structures Selected by Genetic Algorithm Effect of BPR on the Preparation of Nb-Base Powder via Ball Milling The Influence of the Viscosity of Edible Ink to Ink-Jet Printing Drop State Study on Preparation and Hydrophobicity of MTES Derived Silica Sol and Gel Synthesis of Ba2B5O9Cl Whiskers via Flux Method Flame-Fusion Growth of Rutile Single Crystal Effects of Supercritical Carbon Dioxide on Interfacial Properties of Carbon Fiber Synergistic Effects of Colour Protective Agent and Modified Atmosphere Packaging on the Preservation of Litchi (Litchi chinensis Sonn.) Fruit Determination of Mineral Elements in Fermented Liquid with Temperature-Controlled Wet Digestion and Flame Atomic Absorption Spectrometry OD-Characterization of the Symmetric Group S49 Morphology and Mechanical Properties of PA6/ABS Blends Preparation of Semisolid Feedstock by Reversed Cone Channel Pouring

「Nielsen BookData」 より

詳細情報

• NII書誌ID(NCID): BB10560771
• ISBN:
  • 9783037854464
• 出版国コード: sz
• タイトル言語コード: eng
• 本文言語コード: eng
• 出版地: Durnten-Zurich
• ページ数/冊数: 3 v.
• 大きさ: 25 cm
• 親書誌ID:
  • BA24926058